Tešlos Presas pirkti naudotą (7 814)

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2019, veikimo valandos: 3 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 70 t, paskutinio kapitalinio remonto metai: 2025, Technical Data – Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Fill opening (hopper): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depends on material Drive power: 30 kW Iodpfsy S Rv Tsx Abvsib Total connected load: 40 kW Total current consumption: 70 A Throughput capacity with empty beverage cans: - with one pressing cycle: approx. 1.7 t/h - with two pressing cycles: approx. 2.5 t/h Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank capacity: 850 L Installed press dimensions: 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made from wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal offcuts, steel sheet as well as aluminum, brass, and copper waste. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition, see the function video after the overhaul. During relocation, the machine suffered transport damage. The control cabinet was struck by a forklift, causing minor dents, and the main switch (on/off switch) was damaged. These issues are reflected in the significantly reduced selling price and must be repaired by the buyer at their own cost. Notes: All documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is complete. Inspection is possible by appointment. We do not accept liability for technical information or potential errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2012, veikimo valandos: 25 895 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 80 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 600 kg, bendras svoris: 24 000 kg, alyvos bako talpa: 1 000 l, paskutinio kapitalinio remonto metai: 2026, tūrio srautas: 930 m³/val, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of Manufacture: 2012 Total Operating Hours (Machine): 25,895 hours (as of July 2025) Effective Operating Hours (Pump): 14,135 hours (as of July 2025) Number of Bales Pressed: 235,597 (as of July 2025) Main Pressing Force: 78.5 t Specific Pressing Force: 95 N/cm² Pre-Press Force: 28 t Press Chamber Volume: 2.7 m³ Feed Opening Dimensions: 1,500 x 1,100 mm Theoretical Throughput: 930 m³/hour Throughput Under Operating Conditions: 410 m³/hour Bale Dimensions: 750 x 1,100 mm Drive Power: 55 kW Tying: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at Bulk Density of: - 30 kg/m³: approx. 9 to 12 t/hour (material dependent) - 50 kg/m³: approx. 14 to 17 t/hour (material dependent) - 100 kg/m³: approx. 16 to 25 t/hour (material dependent) Throughput at MSW (Municipal Solid Waste): approx. 20 to 27 t/hour (material dependent) Bale Weights: 450 to 600 kg (depending on material and bale length) Hydraulic Oil Tank Volume: 1,000 L Baler Dimensions (assembled with hopper): 10,985 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (baler only): 10,985 x 2,300 x 2,900 mm Machine Weight (baler): approx. 24 t Condition of the Baler: The machine was partially overhauled and serviced in our workshop and, upon completion of the work, tested in both manual and automatic modes during operation. The following overhaul work was carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank completely drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers removed from the press ram and replaced - Twisting wire station with lower wire deflection pulleys cleaned and made operational - Side guides of press ram removed, smoothed, re-installed, and re-adjusted - Main hydraulic cylinder dismantled and disassembled for inspection - Piston rod replaced, cylinder tube honed - Complete seal set replaced, pressure test carried out Isdpfey S Ru Aox Abvoib - Hydraulic hose of main hydraulic cylinder replaced - Vertical and horizontal needle systems for tying dismantled, cleaned, wire deflection pulleys made operational and serviced - Chain cleaned, lubricated, chain tension readjusted - Drillomat cleaned, wire cutters, twisting shafts, and twisting fingers checked, retightened with appropriate torque, and serviced - Door contact switch checked and partly replaced - Emergency stop switch checked - Complete electrical wiring checked and partly renewed - Bearings of the wire guide rollers under the press replaced - New safety guards for vertical and horizontal tying manufactured and installed - Machine inspected, general maintenance performed, and baler tested in manual and automatic mode Scope of Delivery: Only the baler is being sold. Remarks: Full documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagram). Inspection by appointment is possible. No liability is assumed for technical specifications or possible errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, veikimo valandos: 30 143 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 60 t, pildymo angos plotis: 1 100 mm, pildymo angos ilgis: 1 500 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, balo svoris: 570 kg, bendras svoris: 20 000 kg, alyvos bako talpa: 600 l, paskutinio kapitalinio remonto metai: 2026, tūrio srautas: 800 m³/val, Technical Data of the Baler: Manufacturer: Presona AB, Sweden Model: LP 60 VH1 Year of Manufacture: 2015 Total Operating Hours: 30,143 hours (as of July 2025) Actual Pump Runtime: 6,527 hours (as of July 2025) Number of Bales Pressed: 115,193 bales (as of July 2025) Pre-Press Force: 25 t Main Press Force: 60 t Specific Press Force: 73 N/cm² Feed Opening Dimensions: 1,500 x 1,100 mm Filling Volume per Press Cycle: 2.7 m³ Theoretical Throughput: 800 m³/hour Throughput Under Operating Conditions: 350 m³/hour Bale Dimensions: 1,100 x 750 mm Drive Power: 37 kW Tying System: 5-fold vertical, fully automatic Throughput at a Bulk Density of 50 kg/m³: 11 to 14 t/hour Bale Weights: 420 to 570 kg, depending on material Hydraulic Oil Tank Volume: 600 L Baler Dimensions Assembled with Hopper: 10,100 x 3,750 x 4,310 mm (L x W x H) Transport Dimensions (excluding press): 10,100 x 2,400 x 3,000 mm (L x W x H) Machine Weight (Press): approx. 20 t Condition of the Baler: The baler has been partially overhauled in our workshop and subsequently tested in manual and automatic operation. The following overhaul work was carried out: - Machine cleaned, partially de-rusted and partially repainted - Hydraulic oil tank fully drained and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram disassembled and cleaned - All four press ram rollers disassembled and renewed - Grease cartridges of the automatic roller lubrication system replaced - Guide rails on the baler floor in the pressing chamber cut out - Floor reinforced with welded plates - New HARDOX guide rails welded in - Wire station and deflection pulleys for lower wire cleaned and serviced - Guide rails from the floor of the press channel cut out - New HARDOX guide rails welded in - Both side walls of the press channel disassembled and de-rusted - Worn side wall plates removed - Complete side walls fitted and welded with new wear plates - Main hydraulic cylinder disassembled and overhauled for inspection - Piston rod replaced, cylinder tube honed - All sealing sets replaced, pressure test performed - Vertical needle system for tying disassembled, cleaned, wire deflection pulleys serviced and maintained Iijdpfey S Rtlex Abvjb - Chain cleaned, greased, tension readjusted - Drillomat cleaned, wire cutter, drilling shafts and drilling fingers checked, retorqued, and serviced - Machine inspected, general maintenance work carried out, and baler tested in both manual and automatic operation Remarks: The baler is sold without a conveyor belt and without wire stations. Inspection is possible by prior arrangement. We assume no liability for the technical specifications or any errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, veikimo valandos: 44 590 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 2 000 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 000 kg, alyvos bako talpa: 3 100 l, tuščias svoris: 50 800 kg, paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 795 m³/val, Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of Manufacture: 2002, partially overhauled in December 2025 Operating Hours: 44,590 hours (as of December 2025) Main Press Force: 200 t Specific Press Force: 16.5 kg/cm² Feed Hopper Dimensions: 2,000 x 1,020 mm Filling Volume: 2.65 m³ Theoretical Throughput Capacity: 795 m³/hour Bale Dimensions: 1,100 x 1,100 mm, length variable Iedpfxjy S Rruj Abvoib Drive Power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput for MSW: approx. 48 to 54 t/hour, depending on material Hydraulic Oil Tank Capacity: 3,100 L Machine Weight (Press): approx. 50.8 t Scope of Supply: 1 unit baler MACPRESSE, type 111A 1 unit operating manual with CE declaration, electric and hydraulic circuit diagrams Remarks: The machine has been serviced and partially overhauled in our workshop. The following work was carried out, and parts replaced: • Hydraulic oil tank completely emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram disassembled, dismantled into individual parts, mechanics serviced • Replacement of the front two main running rollers • Replacement of knives on the press ram • Main hydraulic cylinder disassembled, dismantled, cylinder tube and piston rod checked, complete seal kit replaced • Replacement of the counter-knife in the frame • Adjustment of knife clearance to approx. 3 mm • Upper steel guide rails in the frame (left and right) replaced • Removal of worn press floor, replacement of floor plate with wear-resistant HARDOX steel • Tying and twisting unit disassembled, dismantled into individual parts, mechanics serviced, all twister shafts and ball bearings replaced • Replacement of all wire rollers in the needle heads • Wire cutters cleaned and readjusted, chains greased and tensioned • All wire guide rollers serviced • All door contact switches replaced • Twister unit disassembled, dismantled, and serviced • General maintenance performed Finally, the baler was tested in both manual and automatic mode. Please refer to the function test video for further details. All documentation (Operating Manual, CE Declaration, Electrical/Hydraulic Schematics) is complete. Inspection by appointment is possible. We accept no liability for technical specifications or possible errors.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1996, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 170 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 1 800 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 900 kg, bendras svoris: 40 000 kg, alyvos bako talpa: 3 000 l, paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 750 m³/val, For sale is a used bale press system comprising an underfloor chain belt conveyor with feed hopper, a hydraulic pre-compactor with an agitator, a MACPRESSE 111A baler, two complete wire feed rack units with five spool holders each (no wire included). Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 111A Year of manufacture: 1996, overhauled in 10/2024 Main press force: 170 t Specific compaction force: 14 kg/cm² Feed hopper dimensions: 1,800 x 1,020 mm Fill volume: 2.5 m³ Nominal throughput: 750 m³/h Bale dimensions: 1,100 x 1,100 mm, length variable Drive power: 2 x 55 kW Wire tying: 5-fold horizontal, fully automatic Throughput: approx. 30 to 35 t/h, material dependent Hydraulic tank volume: 3,000 L Transport dimensions (with new machine feet): 11,700 x 2,300 x 2,900 mm (L x W x H) Machine weight: approx. 40 t Notes: The baler has been partially overhauled in our workshop and function-tested upon completion, as shown in our demonstration video. Previously, the line was used for baling paper and cardboard from municipal collection. As the contract was awarded elsewhere at the end of the term, the complete system is now for sale. A detailed photo documentation and our offer outline all performed refurbishment work and the installed new spare parts. Ijdpfx Aoy S Rqwjbvoib Full documentation (operating manual, CE declaration, electrical/hydraulic schematics) is available. Viewing is possible by appointment. No liability will be accepted for technical data or potential errors. Technical Data – Conveyor: Manufacturer: Wagensfeld B.V. Model: Chain belt conveyor 1700 mm Year of manufacture: 2017 Drive power: 7.5 kW Belt speed: 14 m/min Loading belt length: 6,900 mm Incline belt length: 12,885 mm Gooseneck length: 1,747 mm Overall length: 21,271 mm Incline: 32° Usable width: 1,644 mm Drive shaft height above floor: 5,777 mm Side wall height, loading belt: 500 mm Side wall height, incline belt: 880 mm Steel cleat height: 40 mm Cleat spacing: 1,200 mm Transport dimensions (disassembled): 15,005 x 2,500 x 2,435 mm (L x W x H) Pit dimensions: 11,500 x 2,700 x 1,015 mm (L x W x D) Notes: The chain belt conveyor, manufactured in 2017, was custom built and installed for the baler during its last installation in the Netherlands. The conveyor is in good, ready-for-use condition and has not been overhauled. An installation drawing with pit dimensions is available. Scope of supply: - 1 unit chain belt conveyor, Wagensfeld B.V. - 1 unit feed hopper with pre-compactor flaps - 1 unit agitator - 1 unit MACPRESSE baler, type 111A - 2 units wire feed racks with wire spool holders, without wire - 1 unit operating manual with CE declaration, electrical and hydraulic schematics

Gamybos metai: 2021, būklė: beveik kaip naujas (naudotas), Tipas: PX 30530 Serijos numeris: 12932 Gamybos metai: 2021 Lankstymo ilgis: 3050 mm Spaudimo jėga: 320 t Maksimalus slėgis: 280 bar Variklio galia: 18,5 kW Alyvos bako talpa: 400 l Svoris: 14 700 kg Iisdpfeyhdrrjx Abveb

Būklė: naudotas, Gamybos metai: 2012, veikimo valandos: 5 812 h, Funkcionalumas: visiškai funkcionalus, Baling Press Presto HPK 50 HS, Year of Manufacture 2012, with Perforator and Inclined Conveyor (Sliding Belt Conveyor) Manufacturer: Presto Model: HPK 50 HS Year of Manufacture: 2012 Operating Hours: 5,812 Drive Power: 30 kW Pressing Force: 50 t Feed Opening: 1600 x 650 mm (L x W) Channel Cross-Section: 700 x 950 mm Maximum Feed Volume: 1.06 m³ Cycle Time: 19 s Binding: 4-fold Throughput Capacity at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale Weight: up to 500 kg Machine Dimensions: 8420 x 1900 x 2400 mm (L x W x H) Machine Weight: approx. 10,500 kg Perforator, hydraulically movable Drive Power 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear Feed Opening: 1380 x 1200 mm Inclined Conveyor Length: 7,931 mm Belt Width: 1,400 mm Overall Width: 2,026 mm Incline: 29° Speed: 0.6 m/s Materials: Paper, Cardboard, Film, PET Bottles Please note: All technical data are based on the manufacturer's information. We accept no liability for the stated specifications or possible errors. This offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by appointment. Sale is ex works against advance payment, without warranty or guarantee. Isdpfxoy R Tp To Abvoib

Būklė: geras (naudotas), Gamybos metai: 2021, veikimo valandos: 123 h, Funkcionalumas: visiškai funkcionalus, Vertical baler HSM V-Press 860 plus, year of manufacture 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2021 Operating hours: 123 Pressing force: 60 t Drive power: 4 kW Feed opening: 1195 x 645 mm Feed height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical idle cycle time: 25 s Iiodpfx Ajy R Tncobveb Theoretical pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The baler is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Please note: All technical details are based on the manufacturer's information. We accept no liability for given specifications or possible errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. Sale is ex-location, without warranty or guarantee. Our payment terms are 100% advance payment.

Būklė: geras (naudotas), Gamybos metai: 2021, veikimo valandos: 450 h, Funkcionalumas: visiškai funkcionalus, Vertical baler HSM V-Press 860 plus, Year of manufacture 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2021 Operating hours: 450 Pressing force: 60 t Drive power: 4 kW Iiodey R Srtopfx Abveb Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical cycle time (idle): 25 s Theoretical press capacity: 12 m³/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, Paper, Cardboard Note: The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. Please note: All technical data is based on manufacturer specifications. We accept no liability for the stated information or any possible errors. All offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by arrangement. The sale is ex location, without warranty or guarantee. Our payment condition is 100% advance payment.

Būklė: naudotas, Techniniai duomenys: Maksimalus klijuojamo elemento matmuo: 4000x1060 mm Vertikalūs spaustuvai: 8 vnt. Hidrauliniai spaustuvai Ijdpfx Abjy N Ta Asvjib Maitinimas: 400 V Variklio galia: 5,5 kW Bendri matmenys: Ilgis: 4250 mm Plotis: 1350 mm Aukštis: 2600 mm

Būklė: naudotas, Techniniai duomenys: Briketo skersmuo: 50 mm Briketo ilgis: 50 mm Talpos skersmuo: 1000 mm Talpos aukštis: 920+1000 mm Našumas: ~50 kg/val. Maitinimas: 380 V Variklio galia: 4 kW Avarinis jungiklis Bendri matmenys: Iedpfjy N Taiox Abvoib Ilgis: 1600 mm Plotis: 1100 mm Aukštis: 1500+1000 mm

Būklė: geras (naudotas), Gamybos metai: 1987, Įranga: Iisdpfxey S Syao Abvsb - Spaudimo jėga: 160 kN/16 MP - Sriegio skersmuo: 60 mm - Sriegio eiga per apsisukimą: 32 mm - Laisvas tarpas tarp stulpų: 410 mm - Maks. laisvas aukštis tarp stalo ir stūmoklio: 270 mm - Stalo paviršius: 410 x 280 mm - Svoris: 335 kg Būklė: gera, mažai naudota

Būklė: naudotas, Gamybos metai: 1993, Pressure: 1500 t Upright distance: 5050 mm Stroke: 1100 mm Distance table/ram, stroke up: 2300 mm Table surface: 5000 x 2700 mm Cushion force in table: 320 t Cushion stroke in table: 300 mm Cushion surface in table: 4300 x 1830 mm Cushion force in ram: 120 t Cushion stroke in ram: 200 mm Cushion surface in ram: 3410 x 1650 mm Ram surface: 5000 x 2400 mm Iijdpjvuucqofx Abvsb Speed down: from 360 mm/s Speed up: 168 - 505 mm/s Working speed: 19 - 86 mm/s Oil capacity: 10,500 l Drive power: 450.0 kW Weight: 400.0 t Required space (WxDxH): 3.47 x 6.95 x 12.21 m Height above floor: 8.21 m Depth below floor: 4.0 m Year of construction: 1983 - Overhauled 1993 With oil-hydraulic drive, drawing cushion in table, drawing cushion in ram (cushion area approx. 3410 x 1650 mm), cut-blow damping / stroke limitation (spindle travel approx. 500 mm, max. blanking damping force approx. 750 t, max. blanking damping stroke approx. 30 mm), pressure-/time- and stroke-dependent control as is, where is, WITHOUT dismantling, WITHOUT loading

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2014, 4 metros de largura Pressão nominal de 1250 kN Isdpfx Abjlqwvkeveib Sistema CNC de batente traseiro Sistema de troca rápida de ferramentas

Gamybos metai: 2025, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, Vacuum press – ready for immediate use | Top condition | versatile application For sale: a high-quality vacuum press in excellent condition – ideal for carpentry workshops and woodworking businesses looking to work more efficiently and flexibly. The press allows you to: - veneer with precision - carry out form laminations - shape mineral-based materials and plastics - work economically even with single pieces and custom solutions What this means for you: Expand your service portfolio and take on jobs that were previously unfeasible or unprofitable. Technical details: Vacuum Press Pioneer Vertical L Usable area: 3050 x 1350 mm Internal frame dimensions: 3130 x 1430 mm Iisdpey Rkrfefx Abvob Max. workpiece height: 850 mm Overall dimensions: 3960 x 1640 x 1450 mm Weight: 880 kg Heater Pioneer Heat L Usable area: 2700 x 1100 mm Overall dimensions: 3110 x 1700 x 760 mm Weight: 685 kg Features: - easy operation - low maintenance requirements - highly versatile - lifetime warranty (excluding wear parts) - includes digital application manual and AI! Inspection and test run possible at any time.

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, Vacuum Press / Membrane Press “Columbus Infinity” (Vacuum press system for custom lengths with freely definable usable area) – including digital Master Manual and AI support on tablet for a safe start and reproducible results. The COLUMBUS Infinity is a specialized vacuum press system designed for applications requiring especially long usable areas. The machine can be configured in any length specified by the user and is particularly suitable for custom laminations, long workpieces, and series applications with high throughput. The unique Infinity principle allows for highly efficient extension of the usable length. In combination with the rolling membrane system and multi-zone vacuum extraction, the machine offers great flexibility and precise vacuum control. Only the section of the usable area that is actually in use is vacuum-sealed, which saves energy and allows for high process control. Technical features: • Vacuum table with freely configurable length • Rolling membrane system with manually guided linear carriage • Membrane spooled on a reel for easy unrolling • Patented vacuum buffer reservoir integrated in the table frame • Multi-zone extraction for selective activation of specific areas • Table surface made of 21 mm birch plywood with phenolic coating • Milled vacuum seal groove for reliable membrane sealing • Stable substructure made of welded steel construction • Adjustable machine feet • High-performance vacuum pump with 80 m³/h capacity Available usable areas: Width and length are customized according to customer specification. Machines from COLUMBUS are built for long-term use and are manufactured using high-quality industrial-grade components. The robust construction, proven parts from leading manufacturers, and precise workmanship ensure long service life and reliable operation. Iodpfoy Rkq Usx Abvjib Each COLUMBUS Infinity is part of the COLUMBUS 360° System. This includes the digital Master Manual with extensive practical knowledge of vacuum technology as well as Master GPT – artificial intelligence for all questions concerning the machine, applications, materials, and optimal process parameters. The system supports the user in setup, operation, and process optimization, and comes with a tablet for immediate use.

Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus, Vacuum Press / Membrane Press “Columbus Pioneer” – available for immediate delivery! (Modular system with various configurations and working areas) – now including a digital Master Manual and AI support on tablet for a secure start and reproducible results. The COLUMBUS Pioneer is a professional vacuum or membrane press for applications such as vacuum forming, veneering, coating, and laminating of flat or curved workpieces. Thanks to its modular design, the machine can be adapted to different requirements and is available in various sizes and configurations. Technical specifications: • Membrane quick-change system • Gas pressure dampers for convenient lid opening • Highly elastic natural rubber membrane (up to +130°C) • Robust phenolic resin worktable, 15-layer bonded (up to +120°C) • BECKER high-performance vacuum pump, 40 m³/h (up to 900 mbar / 9 t/m²) • Optional automatic shut-off upon reaching preset pressure • Pressure regulation 400–900 mbar with analog vacuum gauge • Connection for external vacuum bag Isdpfxsy Rkq Ij Abvsib • Support feet with smooth-running swivel castors • FESTO pneumatics and SIEMENS electrical components Available working areas: 3,050 mm x 1,350 mm (Pioneer L) 4,050 mm x 1,350 mm (Pioneer XL) 4,050 mm x 1,700 mm (Pioneer XXL) Versions/Modular setup: The COLUMBUS Pioneer is designed as a modular system and is available in the following versions: BASIC (classic vacuum pressing such as veneering, laminating, and form bonding), HEAT (heating and thermoforming of plastics and mineral-based materials), and VERTICAL (processing of higher workpieces and convenient loading/unloading thanks to vertical opening). These modules can be combined as needed or added later. COLUMBUS machines are engineered for long-term use and manufactured from high-quality industrial components. The robust construction, proven components from renowned manufacturers, and precise workmanship ensure a long service life and reliable operation. COLUMBUS provides a lifetime warranty on the machine structure (excluding wear parts). Every COLUMBUS Pioneer is part of the COLUMBUS 360° system. This includes the digital Master Manual featuring extensive practical vacuum technology know-how, as well as Master GPT – an artificial intelligence for all questions regarding the machine, applications, materials, and optimal process parameters. The system assists users with setup, operation, and process optimization, and is delivered with a tablet for immediate use.

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, Vacuum Press / Membrane Press “Columbus Pioneer” – available for immediate delivery! (Modular system with various configurations and working areas) – now including a digital Master Manual and AI support on tablet for a secure start and reproducible results. The COLUMBUS Pioneer is a professional vacuum or membrane press for applications such as vacuum forming, veneering, coating, and laminating of flat or curved workpieces. Thanks to its modular design, the machine can be adapted to different requirements and is available in various sizes and configurations. Technical specifications: • Membrane quick-change system • Gas pressure dampers for convenient lid opening • Highly elastic natural rubber membrane (up to +130°C) • Robust phenolic resin worktable, 15-layer bonded (up to +120°C) Ijdpfxsy Rkqnj Abveib • BECKER high-performance vacuum pump, 40 m³/h (up to 900 mbar / 9 t/m²) • Optional automatic shut-off upon reaching preset pressure • Pressure regulation 400–900 mbar with analog vacuum gauge • Connection for external vacuum bag • Support feet with smooth-running swivel castors • FESTO pneumatics and SIEMENS electrical components Available working areas: 3,050 mm x 1,350 mm (Pioneer L) 4,050 mm x 1,350 mm (Pioneer XL) 4,050 mm x 1,700 mm (Pioneer XXL) Versions/Modular setup: The COLUMBUS Pioneer is designed as a modular system and is available in the following versions: BASIC (classic vacuum pressing such as veneering, laminating, and form bonding), HEAT (heating and thermoforming of plastics and mineral-based materials), and VERTICAL (processing of higher workpieces and convenient loading/unloading thanks to vertical opening). These modules can be combined as needed or added later. COLUMBUS machines are engineered for long-term use and manufactured from high-quality industrial components. The robust construction, proven components from renowned manufacturers, and precise workmanship ensure a long service life and reliable operation. COLUMBUS provides a lifetime warranty on the machine structure (excluding wear parts). Every COLUMBUS Pioneer is part of the COLUMBUS 360° system. This includes the digital Master Manual featuring extensive practical vacuum technology know-how, as well as Master GPT – an artificial intelligence for all questions regarding the machine, applications, materials, and optimal process parameters. The system assists users with setup, operation, and process optimization, and is delivered with a tablet for immediate use.

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, Vacuum Press / Membrane Press “Columbus Infinity” (Vacuum press system for custom lengths with freely definable usable area) – including digital Master Manual and AI support on tablet for a safe start and reproducible results. The COLUMBUS Infinity is a specialized vacuum press system designed for applications requiring especially long usable areas. The machine can be configured in any length specified by the user and is particularly suitable for custom laminations, long workpieces, and series applications with high throughput. The unique Infinity principle allows for highly efficient extension of the usable length. In combination with the rolling membrane system and multi-zone vacuum extraction, the machine offers great flexibility and precise vacuum control. Only the section of the usable area that is actually in use is vacuum-sealed, which saves energy and allows for high process control. Technical features: • Vacuum table with freely configurable length • Rolling membrane system with manually guided linear carriage • Membrane spooled on a reel for easy unrolling • Patented vacuum buffer reservoir integrated in the table frame • Multi-zone extraction for selective activation of specific areas • Table surface made of 21 mm birch plywood with phenolic coating • Milled vacuum seal groove for reliable membrane sealing • Stable substructure made of welded steel construction • Adjustable machine feet • High-performance vacuum pump with 80 m³/h capacity Iedpfxsy Rkqbo Abvjib Available usable areas: Width and length are customized according to customer specification. Machines from COLUMBUS are built for long-term use and are manufactured using high-quality industrial-grade components. The robust construction, proven parts from leading manufacturers, and precise workmanship ensure long service life and reliable operation. Each COLUMBUS Infinity is part of the COLUMBUS 360° System. This includes the digital Master Manual with extensive practical knowledge of vacuum technology as well as Master GPT – artificial intelligence for all questions concerning the machine, applications, materials, and optimal process parameters. The system supports the user in setup, operation, and process optimization, and comes with a tablet for immediate use.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, COLUMBUS MOVE – The Space-Saving Professional Vacuum Press for Maximum Flexibility Full Performance. Minimal Space Requirement. The COLUMBUS MOVE has been specially designed for operations seeking to utilize professional vacuum technology—even where available space is limited. Thanks to its mobile and compact design, the press can be easily stowed away after use, freeing up valuable workshop space. Ideal for: * Veneering * Form gluing * Laminating * Curved workpieces * Flexible custom production Your benefits: * Space-saving MOVE system * Mobile and flexible in use * Heavy-duty industrial construction * Lifetime warranty on the machine frame * High-quality BECKER vacuum pump * Quick-change membrane system * Connection for external vacuum bag * Easy operation and high operational safety COLUMBUS 360° included: With the practical user manual, master manual, and AI support, you benefit not only from cutting-edge technology but also from decades of application expertise. Technical Data: * Usable area: 3050 x 1350 mm * Maximum load capacity: 1.0 t * Max. workpiece height: 600 mm * Vacuum pump: BECKER 40 m³ Iiodpfx Abjy Rkm Nevob * Weight: 670 kg Particularly attractive for companies aiming for flexible production while making efficient use of valuable workshop space. COLUMBUS has been developing professional vacuum technology for woodworking operations for nearly 50 years. Viewing and personal consultation available by appointment.

Gamybos metai: 2026, būklė: naujas, COLUMBUS PIONEER – The Modular Professional Vacuum Press for Flexible Joineries More possibilities. More applications. Greater future-proofing. The COLUMBUS Pioneer is not just a vacuum press, but a thoughtfully designed complete system for modern joineries and woodworking businesses. Ideal for: * Veneering * Laminating * Coating Iedpoy Rki Rjfx Abveib * Thermoforming * Solid surface materials * Curved and complex workpieces Why choose COLUMBUS? Many businesses discover completely new applications and gain additional contracts within a short time, because the Pioneer makes profitable work possible that was previously rejected. Your Advantages: * Modular system – grows with your business * Lifetime warranty on machine structure * Heavy-duty industrial construction for decades of continuous use * Columbus 360° included: Hands-on expertise, Master Manual, and AI support for maximum operational security * High-quality components by BECKER, FESTO, and SIEMENS * Simple operation and repeatable results Equipment: * Quick-change membrane system * Highly elastic natural rubber membrane up to +130°C * Pressure regulation 400–900 mbar * Connection for external vacuum bag * Durable phenolic resin worktop * Smooth-running swivel castors Available sizes: * L: 3,050 x 1,350 mm * XL: 4,050 x 1,350 mm * XXL: 4,050 x 1,700 mm COLUMBUS has been developing vacuum technology for professional users for almost 50 years. Inspection and personal consultation available by appointment.

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, COLUMBUS PIONEER – Modular Vacuum & Membrane Press with Lifetime Warranty The COLUMBUS Pioneer is the professional solution for joineries and woodworking businesses seeking flexible production and long-term secure investment. Ideal for: * Veneering * Form bonding * Laminating * Thermoforming * Solid surface materials * Curved workpieces Your Benefits: * Modular system – expandable at any time * Lifetime warranty on machine structure * Heavy-duty industrial construction * Columbus 360° package included: Master Manual + AI Support * Premium components from BECKER, FESTO, and SIEMENS * Easy operation and high operational safety Features: * Quick-change membrane system * Natural rubber membrane up to +130 °C * Pressure regulation 400–900 mbar Ijdpfx Aboy Rkgpjveib * Connection for external vacuum bag * Robust phenolic resin worktop * Smooth-swiveling castors Available Sizes: * L: 3,050 x 1,350 mm * XL: 4,050 x 1,350 mm * XXL: 4,050 x 1,700 mm For 50 years, COLUMBUS has been developing vacuum technology for professional users. Viewing and consultation available by appointment.

Būklė: labai geros būklės (naudotas), HSM V-Press 825 Plus Baler Pressing force: 250 kN Drive power: 4 kW Cycle time: 39 s Loading height: 958 mm Loading aperture width x height: 1195 x 530 mm Bale length x width x height: 1200 x 780 x 700 mm Bale length x width x height: 1200 x 780 x 700 mm Machine width x depth x height: 1700 x 1046 x 2370 mm Machine weight: 1063 kg Type of consumables: strapping tape Compacted materials: film, mixed paper, cardboard, die-cut waste, textiles Iodpfx Abev Akciovjib Model years 2012-2014 price: 6,000 EUR HSM V-Press 825 Pro baler, model years 2019-2021 price: 9,000 EUR

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Bystronic Xpert 150 lankstymo presas su Bystronic CNC valdymu, lankstymo ilgis: 4100 mm, maksimali jėga: 1500 kN, maksimalus eigos ilgis: 215 mm, automatiniai atmušai, Bystronic Fast Bend lazerinė sistema. Iiedpeyrnfdjfx Abveb Serijos numeris: 11530057 (2011). Įrenginio svoris: 11 800 kg. Kilmės šalis: Vokietija.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Gamintojas: LVD Modelis: PPEBturbo 220 Tipas: PPEB-EFL 220/30 Pagaminimo metai: 2006 Serijos numeris: 30494 Techniniai parametrai: Maks. spaudimo jėga: 2 200 kN (220 t) Darbinis ilgis: 3050 mm Atstumas tarp stelažų: 2600 mm Maks. slankiklio eiga: 450 mm Maks. atstumas stalas–slankiklis: 685 mm Gylis (kaklelis): 450 mm X ašies eiga: 600 mm Stalo plotis: 120 mm Greitis: Prispaudimo greitis: 120 mm/s Darbinis greitis: 21 mm/s Sugrįžimo greitis: 200 mm/s Pavaros ir hidraulika: Variklio galia: 37 kW Įtampa: 400 V Siurblys: reguliuojamas Hidraulika: Bosch / Rexroth SYDFE1 Alyvos rezervuaras: 350 l Papildoma informacija: Ijdpfeyhdyijx Abveib Valdymas: LVD Cadman CNC Triukšmo lygis: 80 dB(A) Staklių svoris: apie 14 500 kg