Slėginis Volelis pirkti naudotą (1 669)

Būklė: naujas, Gamybos metai: 2025, Our SAPI pressure blasting unit, type "Mammut" with a 200-liter vessel capacity, is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. A water separator is also permanently fitted to the blasting unit, which removes moisture from the compressed air and prevents the blasting media from clumping due to excessive humidity. For safe operation of the sandblasting unit, our safety shut-off system is included. This starts and stops the blasting process via the hand lever mounted on the blasting hose. Scope of delivery includes: - SAPI pressure blasting unit "Mammut 200 L" - Pressure regulator 1 1/4", permanently fitted - Water separator 1 1/4", permanently fitted - SAPI safety shut-off system Technical data – pressure blasting unit: - Precisely adjustable from 0.1 – 12 bar - TÜV-tested with certificate - Fixed piping 1 1/4" internal and external - Rubber-coated metal cone with rubber seal - Large handhole opening - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 200 l - Overall height: 1,420 mm - Vessel diameter: 600 mm - Overall diameter: 1,000 mm - Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with Safety Shut-Off - Fastest on/off switching times in compliance with trade association regulations (VBG 48) - The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar - Reduced consumption of blasting media, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on - Upon restarting, full blasting pressure is immediately available at the nozzle – no pressure build-up required → lower consumption & reduced hose wear - No condensate formation in the vessel, as it remains permanently pressurized → no venting required for each start/stop - Optimum media dosing with hardened fine dosing valve - Less compressed air requirement → noticeably lower diesel consumption - One-person operation, as the pressure is shown and can be adjusted directly at the manometer – even without starting - No components susceptible to failure such as control valves, membranes, or seals → easy maintenance and high operational safety - Only the blasting hose in the safety shut-off needs to be checked and, if necessary, replaced Godpfewc Rk Eex Ahlska

Būklė: naujas, Our SAPI pressure blasting unit type "Mammut" with a 60-litre tank capacity is suitable for all common blasting media. The blasting pressure can be infinitely adjusted from 0.1 to 12 bar via the permanently installed pressure regulator. The unit also features a permanently mounted water separator, which extracts moisture from the compressed air and thus prevents the blasting media from clumping due to excessive humidity. For safe operation, our safety shut-off system is included. This allows starting and stopping of the blasting process via an operating lever mounted on the blasting hose. Delivery includes: - SAPI pressure blasting unit "Mammut 60 L" - Pressure regulator 1", permanently installed - Water separator 1", permanently installed - SAPI safety shut-off system Technical specifications pressure blasting unit: - Precisely adjustable from 0.1 to 12 bar - TÜV certified with certificate - Fixed 1" piping, internal and external - Rubber-coated metal cone with rubber seal - Generously sized hand hole - Chassis with rubber wheels - Blasting media dosing valve (suitable for all common blasting media) - Capacity: 60 l - Overall height: 1,130 mm - Vessel diameter: 360 mm - Total diameter: 700 mm - Weight: approx. 60 kg Godpfx Aswc Afhshloka ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT WITH SAFETY SHUT-OFF: - Extremely fast switching on and off times, complying with industrial safety regulations (VBG 48) - Pressure setting can be fine-tuned accurately prior to blasting, infinitely adjustable from 0.1 – 12.0 bar - Lower blasting media consumption, as the pressure vessel remains constantly pressurized and thus no unnecessary media run-on occurs - Upon restarting, full blasting pressure is immediately available at the nozzle, eliminating delay; this results in significantly lower media consumption and reduced wear on the blasting hose - No moisture formation (condensate) in the vessel, as it remains continuously pressurized, avoiding ventilation during each start and stop; this procedure offers additional benefits: - Optimal blasting media dosing with hardened fine adjustment valve - Reduced compressed air demand, significantly lowering fuel (diesel) consumption - Single-person operation, as the vessel pressure is continuously displayed and can be conveniently adjusted via the pressure gauge without prior startup - No failure-prone components such as control valves, membranes, or seals, resulting in high operational reliability and low maintenance. Only the hose in the safety shut-off needs to be inspected and replaced if necessary.

Būklė: naujas, Allgemeine Merkmale: • Brotteigmaschine für 65 bis 90 Liter Wasser pro 100 kg Mehl • Der Geschwindigkeitsregler ermöglicht die Anpassung der Relativgeschwindigkeit zwischen den Bändern, um den gewünschten Rundungsgrad zu erreichen • Geeignet für Teigstücke von 70 g bis 2.200 g • Einstellbarer Winkel zwischen zwei Stangen zur Anpassung der Teigstückgröße • Mehlschale • Höhenverstellbar • Fahrrollen für einfachen Transport • Verarbeitung von Teigstücken bis zu 1.400 g möglich • Einstellbare Rundungszeit zur Regulierung der Geschwindigkeit eines Bandbereichs • Höhenverstellbare Füße Gkedpouuc T Tsfx Ahlja • Der Winkel zwischen den beiden Bändern kann punktgenau eingestellt werden • Optional kann eine Mehldusche installiert werden Technische Daten: • Bandlänge: Standard 1,7 m • Leistung: 1,1 kW • Spannung: 380 V, 3N PE • Gewicht: 250 kg

Būklė: naujas, Pagrindinės savybės: • Duonos tešlos mašina, sunaudojanti nuo 65 iki 90 litrų vandens 100 kg miltų • Greičio variatorius leidžia reguliuoti juostų santykinį greitį, kad būtų pasiektas pageidaujamas dalelių užapvalinimo laipsnis • Tinka gaminiams nuo 70 g iki 2200 g • Kampas tarp dviejų reguliuojamų strypų leidžia pritaikyti dalelių dydį užapvalinimui • Miltų talpa (dubuo) • Reguliuojamo aukščio • Sukamosios ratukai lengvam perstūmimui • Gali apdoroti iki 1400 g svorio tešlos gabalus • Reguliuojamas užapvalinimo laikas valdo vienos juostos greitį • Reguliuojamo aukščio kojos • Kampas tarp dviejų juostų reguliuojamas nustatymo tašku • Papildomai galima įrengti miltų purkštuvą Techninės charakteristikos: • Juostos ilgis: standartinis 1,5 m • Galingumas: 1,1 kW • Įtampa: 380 V 3N PE Gkjdpjuuc Uwjfx Ahlja • Svoris: 250 kg

Būklė: naujas, Características generales: Máquina para masas de pan con capacidad para trabajar entre 65 y 90 litros de agua por cada 100 kg de harina. El variador de velocidad permite ajustar la velocidad relativa entre las bandas para conseguir el grado de boleado deseado. Apta para piezas de 70 g a 2.200 g. Ángulo entre dos barras ajustable para adecuar el tamaño de las piezas a bolear. Tolva para harina. Altura regulable. Gedpfxouuc U Rj Ahljka Ruedas giratorias para facilitar el desplazamiento. Puede trabajar con piezas de masa de hasta 1.400 g. Temporizador de boleado regulable que controla la velocidad de una de las bandas. Patas ajustables en altura. El ángulo entre las dos bandas puede ajustarse en un punto. Posibilidad de instalar espolvoreador de harina como opción. Características técnicas: Longitud de banda: 2 m Potencia: 1,1 kW Tensión: 380 V 3N PE Peso: 320 kg

Būklė: paruoštas naudoti (naudotas), mašinos/transporto priemonės numeris: 5981, Darbinis aukštis: 870 mm Darbinis plotis: 1300 mm Transporterio juostos plotis: 1270 mm Transportavimo greitis: 6 - 30 m/min, bepakopis reguliavimas Praėjimo aukštis: 3 mm - 80 mm 1 gumuotas užnešimo volelis, skersmuo 238 mm, guminis sluoksnis 5 By1 1 chromuotas dozavimo volelis, skersmuo 174 mm Elektros įrangos darbo įtampa 400 V, 50 Hz 3 fazės Bendroji prijungimo galia: 1,9 kW Varikliai ir valdymo įtaisai sprogimui atsparioje versijoje Papildomi įrenginiai: atskiras dozavimo volelio pavaros reguliavimas su osciluojančiu dozavimo volelio grandikliu Valdymo pusė: kairė Gkedpfx Ahjyah Uzolja Mašinos ilgis: 1000 mm Svoris: 1000 kg

Būklė: geras (naudotas), Darbinis aukštis: 870 mm Darbinis plotis: 1300 mm Transportavimo greitis: 6–30 m/min, bepakopis reguliavimas Pralaidos aukštis: 3 mm – 90 mm 1 gumuotas dengimo volelis, skersmuo – 238 mm, guminis sluoksnis 5 x 1; dengimo volelio plotis: 1416 mm 1 chromuotas dozavimo volelis, skersmuo – 174 mm; dozavimo volelio plotis: 1416 mm 1 gumuotas spaudimo volelis, skersmuo – 190 mm; spaudimo volelio plotis: 1300 mm Elektros įranga Darbinė įtampa: 400 V, 50 Hz Bendroji įvado galia: 1,87 kW Varikliai ir jungimo įrenginiai priešsprogiminės konstrukcijos, sumontuoti ant mašinos ir prijungti prie gnybtų dėžutės. Valdiklis (ne EX) atskirame valdymo spintoje, skirtas montuoti už pavojingos zonos ribų. Papildoma įranga: atskiras dozavimo volelio pavara, 2–7 m/min be mentelės, dozavimo volelio sinchroniniam veikimui. Valdymo pusė: kairė Gedpfsyah Twox Ahloka Mašinos ilgis: 975 mm Svoris: 1000 kg

Gamybos metai: 2020, būklė: naujas, • PLC microprocessor control • HMI control panel • Phases can be changed manually or automatically – temporarily Gkedpfx Ajfz Dvcshloa • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – in the event of power failure or sudden shutdown, mixing of liquids is prevented The control box is built to IP54 standards User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners utilize sheet metal panels for chemical protection. The wash walls offer splash protection, and thanks to the closed chemical circulation system, the process can be carried out with minimal chemical usage. Due to the low amount of refrigerant required, the medium is easy to heat and inexpensive to purchase. Additionally, you can clean large-sized components that cannot be washed in immersion tanks. Filtration System Thanks to the filtration system, chemicals circulate in a closed loop—three filters of various thicknesses are used to prevent debris and grease from entering the system. Chemicals are stored in heated stainless steel tanks and are pressurized by a pump, delivering them to the lance. Washing Dimensions The high-pressure cleaner enables the washing of large components. An optional rotating platform allows the cleaned item to be turned; items can be loaded using a forklift or crane. High-pressure pumps The washing system comprises two preparation phases. Both treatments have independent sets of pipelines, pumps, cables, and spray guns to minimize mixing during phase changeover. Drains have dedicated valves for controlling fluid recovery. The car wash is equipped with logical control that manages all components. Chemicals are pumped by a highly durable, acid-resistant AISI304 multi-stage pump (3 kW, 20 bar). For the rinsing phase, a high-pressure plunger pump with ceramic plungers (3 kW) is used, delivering 160–200 bar of pressure.

Gamybos metai: 2020, būklė: naujas, • PLC microprocessor control • HMI control panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – in the event of power failure or sudden shutdown, mixing of liquids is prevented The control box is built to IP54 standards User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners utilize sheet metal panels for chemical protection. The wash walls offer splash protection, and thanks to the closed chemical circulation system, the process can be carried out with minimal chemical usage. Due to the low amount of refrigerant required, the medium is easy to heat and inexpensive to purchase. Additionally, you can clean large-sized components that cannot be washed in immersion tanks. Godpfxjf Aaale Ahljka Filtration System Thanks to the filtration system, chemicals circulate in a closed loop—three filters of various thicknesses are used to prevent debris and grease from entering the system. Chemicals are stored in heated stainless steel tanks and are pressurized by a pump, delivering them to the lance. Washing Dimensions The high-pressure cleaner enables the washing of large components. An optional rotating platform allows the cleaned item to be turned; items can be loaded using a forklift or crane. High-pressure pumps The washing system comprises two preparation phases. Both treatments have independent sets of pipelines, pumps, cables, and spray guns to minimize mixing during phase changeover. Drains have dedicated valves for controlling fluid recovery. The car wash is equipped with logical control that manages all components. Chemicals are pumped by a highly durable, acid-resistant AISI304 multi-stage pump (3 kW, 20 bar). For the rinsing phase, a high-pressure plunger pump with ceramic plungers (3 kW) is used, delivering 160–200 bar of pressure.

Gamybos metai: 2020, būklė: naujas, • PLC microprocessor control • HMI control panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – in the event of power failure or sudden shutdown, mixing of liquids is prevented The control box is built to IP54 standards User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners utilize sheet metal panels for chemical protection. The wash walls offer splash protection, and thanks to the closed chemical circulation system, the process can be carried out with minimal chemical usage. Due to the low amount of refrigerant required, the medium is easy to heat and inexpensive to purchase. Additionally, you can clean large-sized components that cannot be washed in immersion tanks. Filtration System Thanks to the filtration system, chemicals circulate in a closed loop—three filters of various thicknesses are used to prevent debris and grease from entering the system. Chemicals are stored in heated stainless steel tanks and are pressurized by a pump, delivering them to the lance. Washing Dimensions Gedpjfz Dvvsfx Ahlska The high-pressure cleaner enables the washing of large components. An optional rotating platform allows the cleaned item to be turned; items can be loaded using a forklift or crane. High-pressure pumps The washing system comprises two preparation phases. Both treatments have independent sets of pipelines, pumps, cables, and spray guns to minimize mixing during phase changeover. Drains have dedicated valves for controlling fluid recovery. The car wash is equipped with logical control that manages all components. Chemicals are pumped by a highly durable, acid-resistant AISI304 multi-stage pump (3 kW, 20 bar). For the rinsing phase, a high-pressure plunger pump with ceramic plungers (3 kW) is used, delivering 160–200 bar of pressure.

Gamybos metai: 2020, būklė: naujas, • PLC microprocessor control • HMI control panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – in the event of power failure or sudden shutdown, mixing of liquids is prevented The control box is built to IP54 standards User manual, declaration of conformity, 12-month warranty. Gjdpfx Aofz Ax Sohljka ROMER high-pressure cleaners utilize sheet metal panels for chemical protection. The wash walls offer splash protection, and thanks to the closed chemical circulation system, the process can be carried out with minimal chemical usage. Due to the low amount of refrigerant required, the medium is easy to heat and inexpensive to purchase. Additionally, you can clean large-sized components that cannot be washed in immersion tanks. Filtration System Thanks to the filtration system, chemicals circulate in a closed loop—three filters of various thicknesses are used to prevent debris and grease from entering the system. Chemicals are stored in heated stainless steel tanks and are pressurized by a pump, delivering them to the lance. Washing Dimensions The high-pressure cleaner enables the washing of large components. An optional rotating platform allows the cleaned item to be turned; items can be loaded using a forklift or crane. High-pressure pumps The washing system comprises two preparation phases. Both treatments have independent sets of pipelines, pumps, cables, and spray guns to minimize mixing during phase changeover. Drains have dedicated valves for controlling fluid recovery. The car wash is equipped with logical control that manages all components. Chemicals are pumped by a highly durable, acid-resistant AISI304 multi-stage pump (3 kW, 20 bar). For the rinsing phase, a high-pressure plunger pump with ceramic plungers (3 kW) is used, delivering 160–200 bar of pressure.

Gamybos metai: 2020, būklė: naujas, • PLC microprocessor control • HMI control panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – in the event of power failure or sudden shutdown, mixing of liquids is prevented The control box is built to IP54 standards User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners utilize sheet metal panels for chemical protection. The wash walls offer splash protection, and thanks to the closed chemical circulation system, the process can be carried out with minimal chemical usage. Due to the low amount of refrigerant required, the medium is easy to heat and inexpensive to purchase. Additionally, you can clean large-sized components that cannot be washed in immersion tanks. Filtration System Thanks to the filtration system, chemicals circulate in a closed loop—three filters of various thicknesses are used to prevent debris and grease from entering the system. Chemicals are stored in heated stainless steel tanks and are pressurized by a pump, delivering them to the lance. Gsdpoflpmqefx Ahlska Washing Dimensions The high-pressure cleaner enables the washing of large components. An optional rotating platform allows the cleaned item to be turned; items can be loaded using a forklift or crane. High-pressure pumps The washing system comprises two preparation phases. Both treatments have independent sets of pipelines, pumps, cables, and spray guns to minimize mixing during phase changeover. Drains have dedicated valves for controlling fluid recovery. The car wash is equipped with logical control that manages all components. Chemicals are pumped by a highly durable, acid-resistant AISI304 multi-stage pump (3 kW, 20 bar). For the rinsing phase, a high-pressure plunger pump with ceramic plungers (3 kW) is used, delivering 160–200 bar of pressure.

Gamybos metai: 2020, būklė: naujas, • PLC microprocessor control • HMI control panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – in the event of power failure or sudden shutdown, mixing of liquids is prevented The control box is built to IP54 standards User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners utilize sheet metal panels for chemical protection. The wash walls offer splash protection, and thanks to the closed chemical circulation system, the process can be carried out with minimal chemical usage. Due to the low amount of refrigerant required, the medium is easy to heat and inexpensive to purchase. Additionally, you can clean large-sized components that cannot be washed in immersion tanks. Filtration System Thanks to the filtration system, chemicals circulate in a closed loop—three filters of various thicknesses are used to prevent debris and grease from entering the system. Chemicals are stored in heated stainless steel tanks and are pressurized by a pump, delivering them to the lance. Washing Dimensions Gjdpfxsfzrapj Ahlska The high-pressure cleaner enables the washing of large components. An optional rotating platform allows the cleaned item to be turned; items can be loaded using a forklift or crane. High-pressure pumps The washing system comprises two preparation phases. Both treatments have independent sets of pipelines, pumps, cables, and spray guns to minimize mixing during phase changeover. Drains have dedicated valves for controlling fluid recovery. The car wash is equipped with logical control that manages all components. Chemicals are pumped by a highly durable, acid-resistant AISI304 multi-stage pump (3 kW, 20 bar). For the rinsing phase, a high-pressure plunger pump with ceramic plungers (3 kW) is used, delivering 160–200 bar of pressure.

Gamybos metai: 2020, būklė: naujas, • PLC microprocessor control • HMI control panel • Phases can be changed manually or automatically – temporarily • Two separate circuits for water and chemicals, closed-loop system • Intelligent control – in the event of power failure or sudden shutdown, mixing of liquids is prevented The control box is built to IP54 standards User manual, declaration of conformity, 12-month warranty. ROMER high-pressure cleaners utilize sheet metal panels for chemical protection. The wash walls offer splash protection, and thanks to the closed chemical circulation system, the process can be carried out with minimal chemical usage. Due to the low amount of refrigerant required, the medium is easy to heat and inexpensive to purchase. Additionally, you can clean large-sized components that cannot be washed in immersion tanks. Filtration System Thanks to the filtration system, chemicals circulate in a closed loop—three filters of various thicknesses are used to prevent debris and grease from entering the system. Chemicals are stored in heated stainless steel tanks and are pressurized by a pump, delivering them to the lance. Gjdofz A D Nspfx Ahleka Washing Dimensions The high-pressure cleaner enables the washing of large components. An optional rotating platform allows the cleaned item to be turned; items can be loaded using a forklift or crane. High-pressure pumps The washing system comprises two preparation phases. Both treatments have independent sets of pipelines, pumps, cables, and spray guns to minimize mixing during phase changeover. Drains have dedicated valves for controlling fluid recovery. The car wash is equipped with logical control that manages all components. Chemicals are pumped by a highly durable, acid-resistant AISI304 multi-stage pump (3 kW, 20 bar). For the rinsing phase, a high-pressure plunger pump with ceramic plungers (3 kW) is used, delivering 160–200 bar of pressure.

Būklė: naudotas, Volelių komplektai profilių lenkimo mašinai, 3 volelių žiedų lenkimo HERKULES WETZLAR Voleliai tinka HERKULES WETZLAR BO 238 N tipo profilių lenkimo mašinai Ašies skersmuo: 60 mm su 18 mm pleištu 2 vnt. volelių komplektas Nr.1, volelio skersmuo 110 mm, volelio plotis 180 mm 2 vnt. volelių komplektas Nr.2, volelio skersmuo 160 mm, volelio plotis 40 mm 3 vnt. volelių komplektas Nr.3, volelio skersmuo 150 mm, vamzdžio skersmeniui Ø 33 mm, volelio plotis 87 / 115 mm - 3-čio komplekto voleliai su adapterio žiedu nuo Ø 93 iki Ø 60 mm be pleišto Mašina turėjo 2 varomus volelius Visų volelių svoris 57 kg Gera būklė Gkjdpsglaq Iofx Ahlea

Būklė: naudotas, approx. 1.7 t available Godoglmt Nopfx Ahleka

Būklė: naudotas, Gamybos metai: 2017, Apžvalga Ši stiklo butelių pilstymo ir uždarymo mašina buvo pagaminta 2017 m. Italijos įmonės GAI. Modelis MLE 881 Beer skirtas alaus ir vyno pilstymui bei uždarymui į stiklo butelius, pasižymi dideliu tikslumu ir universalumu. Mašina palaiko karūninius kamščius, todėl puikiai tinka alaus darykloms ir gėrimų gamintojams, turintiems įvairių pakavimo poreikių. Mašina yra labai geros būklės ir paruošta darbui, nes buvo naudojama tik retkarčiais dėl mažo gamybos kiekio – pagrindinę rinkos dalį sudarė skardinės. Galima parodyti bandomąjį paleidimą su vandeniu. Techniniai duomenys - Nominalus našumas: 1 500 butelių/val. (pagal 0,33 l formato butelius) - Butelio formatai: maksimalus butelio skersmuo – 115 mm, tiektuvo sraigtas universaliai tinkamas buteliams nuo 60 mm iki 115 mm - Uždarymo tipai: karūniniai kamščiai - Pilstymo sistema: izobarinė (alu ir gazuotiems gėrimams) - Produktų tipai: alus ir kiti gazuoti gėrimai - Komplekte yra imitaciniai (dummy) buteliai ir CIP indai - Su dviguba išankstinio vakuumavimo sistema mažesniam deguonies patekimui - Mašina gali būti valoma CIP sistema Gksdpozcu Slefx Ahlsa

Būklė: naudotas, Gamybos metai: 2012, Apžvalga Šis 2012 m. pagamintas Krones Modulfill užpildymo ir užsukimo monoblokas skirtas gėrimų išpilstymo linijose naudojamų stiklinių butelių užpildymui ir uždarymui. Įrenginys turi 60 užpildymo vožtuvų ir 12 užsukimo galvų, numatyta našumui apie 15 000 butelių per valandą. Įrangos faktinis pajėgumas – apie 14 990 butelių/val., stebėtas gamyboje. Priderintas prie 0,75 l ir 0,33 l stiklinių butelių. Užsukimo sistema pritaikyta plastikiniams sraigtiniams kamšteliams. Valdymas vykdomas Krones iPanel CD valdymo skydeliu, įranga įmontuota nerūdijančio plieno ir stiklo apsauginėje spintoje. Veikimo duomenys rodo 41 381 darbo valandą. Techniniai duomenys - Gamintojas: Krones AG - Įrenginio tipas: Užpildymo ir užsukimo monoblokas - Modelis / žymėjimas: Krones Modulfill - Pagaminimo metai: 2012 - Paskirtis: Stiklinių butelių užpildymas ir uždarymas - Priderinta butelių talpa: 0,75 l (Ø 75 mm x 265 mm) ir 0,33 l (Ø 65 mm x 175 mm) - Užpildymo sistema: Tūrinis užpildymas - Užpildymo vožtuvų skaičius: 60 - Užsukimo galvų skaičius: 12 - Naudojamas kamštelių tipas: Plastikinis sraigtinis kamštelis - Projektinis našumas: ~15 000 butelių/val. - Faktinės veiklos valandos: 41 381 h - Gamybos skaitiklis: 40 754 h Gjdpfxezcga Uo Ahloka - Valdymo sąsaja: Krones iPanel CD - Maitinimo įtampa: 400 / 230 V - Elektros tinklas: AC 3/N/PE - Dažnis: 50 Hz - Pilnos apkrovos srovė: 36 A - Konstrukcija: Nerūdijančio plieno ir stiklo apsauginis korpusas - Būklė: Naudotas, darbo gamybinėje aplinkoje stebėtas įrenginys.

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, - Bedeschi RS dantytas trupintuvas; - Haendle WMZ dantytas trupintuvas 412 A; - GHH 2366 WH 75/60 smūginis trupintuvas; - Alfa popieriaus smulkintuvai; Pjuvenų malūnas; Medienos kapoklė - Haendle HM2080 šlapių molio malūnas (pan mill); Gsdpfx Ahsyl Tmmsleka - Haendle HM2080a šlapių molio malūnas (pan mill) - Breitenbach smulkus volinis malūnas PWF 812 800*1200, tarpas nuo 0,6 mm, volų kevalo storis 95 ir 105 mm, variklis 90 kW, pavaros skriemulys ⌀650, variklio skriemulys ⌀224, našumas prie 0,6-0,8 mm tarpo: 40-50 t/val.; - Haendle smulkus volinis malūnas Alpha WFZH8100b. Paleistas 1996 m. Nenaudojamas nuo 2012 m. Tarpas reguliuojamas nuo 0,6 mm. Įdiegti nauji volų kevalai. Guoliai pakeisti dalyvaujant Haendle specialistams; - Kema volinis malūnas 1000x800, tarpas 1-3 mm; - Rieter smulkus volinis malūnas GSA 1000x800, tarpas 1-1,5 mm; - Rieter-Werke Haendle volinis malūnas HW 80x80-HM, tarpas 0,6 mm; - Haendle mechaninis volinis malūnas WFZ 880A, tarpas 0,8 mm, 42 t/val.

Būklė: geras (naudotas), Gamybos metai: 1994, Funkcionalumas: visiškai funkcionalus, reikalingas aukštis: 2 440 mm, bendras svoris: 1 480 kg, slėgis: 2 juosta, bendras plotis: 1 300 mm, bendras ilgis: 1 850 mm, bendras aukštis: 1 650 mm, filtravimo plotas: 0,75 m², darbinė temperatūra: 200 °C, Emaliuotas plieninis filtruojantis nutsche, Estrella AG, Šveicarija Talpa: 760 litrų filtruojanti nutsche / vakuuminė nutsche / slėginis nutsche filtras Metai: 1994 Dokumentacija: pilnai pateikta Gsdpfx Ahju U Afusleka Darbingumas: pilnai veikiantis Skersmuo: 1000 mm Filtravimo plotas: 0,75 m2 Leistinas darbinis slėgis: -1/+2 bar Leistina darbinė temperatūra: -10/+200 °C Laikančioji konstrukcija: stovinti ant kojų su pagrindu Atidarymas: hidraulinė atidarymo pagalba Emalio kokybė: mėlynas, Email 2000 Estrella Bendras tūris: 760 litrų Bendras aukštis atidarius: 2440 mm Aukštis uždarius: 1590 mm I x P: 2000 x 1300 mm

Būklė: naudotas, Gamybos metai: 2025, Apžvalga Ši sukamoji priešslėginė skardinimo ir uždarymo mašina buvo pagaminta 2025 metais Italijos įmonės Framax. Cantastic 6000-EP skirta alaus, gaiviųjų gėrimų ir alkoholinių RTD gėrimų pilstymui ir skardinių uždarymui. Šiuo metu ji vis dar veikia ir gali būti apžiūrėta pagal pageidavimą. Techniniai duomenys - Našumas: - apie 70 skardinių/min (500 ml) - apie 100 skardinių/min (250 / 330 ml) - Formatai: 250 ml / 330 ml / 500 ml (standartinės, lieknos ir siauro profilio skardinės) - Paskirtis: skardinių užpildymas ir uždarymas (alaus, gaiviųjų gėrimų, RTD gėrimų) - Konfigūracija: 10 užpildymo vožtuvų / 2 uždarymo galvutės - Užpildymo sistema: priešslėginis užpildymas - Užpildymo slėgis: apie 0,15 – 0,4 MPa - Užpildymo temperatūra: apie 1 – 4 °C - CO₂ valdymas: išankstinis valymas ir dujinimas, deguonies mažinimo sistema - Uždarymo sistema: dangtelio dydis 202 (pasirinktinai 200), dangtelių rankinis padavimas - Valdymo sistema: Siemens S7-1200 PLC su HMI lietimui jautriu ekranu - Pavaros sistema: dažnio keitiklis (Danfoss), vieningas pavara - Tiekimas: - Galia: apie 5 kW - Suslėgtas oras: apie 0,4 Nm³/val., ≥ 0,4 MPa - CO₂ tiekimas: ≥ 0,3 MPa - Vandens suvartojimas: apie 0,2 m³/val. - Matmenys: apie 3.153 × 1.980 × 2.350 mm Gsdpszbhi Isfx Ahloka - Svoris: apie 5.500 kg Komplektacija - Užpildymo ir uždarymo monoblokas | Framax | Cantastic 6000-EP | Nepridedama | Sukamoji priešslėginio užpildymo mašina su integruotu uždarytuvu - Valdymo sistema | Siemens | S7-1200 | Nepridedama | PLC su lietimui jautriu ekranu - Pavaros sistema | Danfoss | Nepridedama | Nepridedama | Dažnio keitiklis - Užpildymo vožtuvų šerdys | Nepridedama | Nepridedama | Nepridedama | 1 komplektas - Uždarymo volai | Nepridedama | Nepridedama | Nepridedama | 1 komplektas (Nr. 1 ir Nr. 2) - Uždarymo griebtuvai | Nepridedama | Nepridedama | Nepridedama | 1 vnt. - Skardinių briaunų tarpinės | Nepridedama | Nepridedama | Nepridedama | 10 vnt. - Užpildymo vožtuvų tarpinės | Nepridedama | Nepridedama | Nepridedama | 10 komplektų

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, aukščio reguliavimo tipas: elektrinis, darbo diapazonas: 400 mm, garantijos trukmė: 6 mėnesiai, Volelių padengimo mašina Gamintojas: Cosma Tipas: 400 RC Pagaminimo metai: 2023 (parodinis įrenginys – niekada nedirbo gamyboje!) Įskaičiuota 6 mėn. naudotos įrangos garantija Dviejų volelių padengimo mašina aliejui tepti Naudojant Cosma volelių padengimo sistemą, aliejus gali būti tepamas ant masyvo grindų (parketas), sienų apdailos plokščių, laiptų, sodo medžiagų, pastolių medienos ir sienų dekoracijų. Darbinis plotis: 400 mm Tinka ruošiniams: Gjdjzgvlmepfx Ahloka storis 10 – 50 mm Darbo aukštis: 900 mm Komplektacija: - Dozavimo volelis, 0,37 kW - Gumuotas padengimo volelis, 0,37 kW, 25 Shore Su elektriniu aukščio reguliavimu ir mechaniniu aukščio indikatoriumi Valdymo skydelis: padavimo greitis, srovė kiekvienam voleliui ir volelių aukščio reguliavimas

Būklė: geras (naudotas), Pristatymo komplektacijoje yra: 01x standartinė atskyrimo juosta, naudota Medžiagos spalva: Sendzimiro cinkuota Bendras ilgis: apie 2.440 mm Atskyrimo juostos ilgis: apie 2.365 mm Bendras aukštis: apie 65 mm Atskyrimo aukštis: apie 38 mm Profilis: 25 x 35 mm (A x P) Vienpusė apsauginė galvutė Svoris / vnt.: apie 2,19 kg Gjdpfeyk E T Nex Ahljka Jūsų kontaktiniai asmenys mūsų įmonėje: Ponas: Andre Evering Ponas: Mario Klöver Ponas: Falk Deutsch Bendra informacija apie prekę: Ši prekė siūloma tik atsiėmimui vietoje. Jei pageidaujamas transportavimas ar siuntimas, patirs papildomų išlaidų, kurios priklausomai nuo pristatymo vietos ir apimties gali būti atskirai patikslintos mūsų įmonėje.

Būklė: geras (naudotas), We offer you 4 transport castors for sale here. Gedpfx Ajhunwashleka The scope of delivery includes: 04x fixed castors, used Wheel colour: black Bracket colour: zinc-plated (sendzimir galvanized) Technical data: Overall height: approx. 155 mm Wheel diameter: approx. 125 mm Wheel width: approx. 37.5 mm Wheel material: solid rubber Rim material: polypropylene Plate dimensions: approx. 100 x 90 mm (W x D) Hole diameter: approx. 9 mm Number of holes: 4 pcs Bolt hole spacing: approx. 80 x 60 mm (center to center) Weight per piece: approx. 0.803 kg

Būklė: naudotas, Gamybos metai: 2004, mašinos/transporto priemonės numeris: 10720, darbinis plotis: 1 300 mm, galia: 3,2 kW (4,35 AG), stalo ilgis: 400 mm, stalo plotis: 1 300 mm, ritinėlių skaičius: 2, Nėra minimalaus kainos – garantuotas pardavimas už didžiausią pasiūlytą kainą! Mašinos atsiėmimas turi būti įvykdytas tarp 2026-06-10 ir 2026-06-30! TECHNINIAI DUOMENYS Maksimalus darbo plotis: 1 300 mm Volų skaičius: 2 Stalo plotis: 1 400 mm Stalo ilgis: 400 mm MAŠINOS DUOMENYS Bendroji galia: 3,2 kW ĮRANGA CE ženklinimas Gkedpfx Asy Uv Adjhlea Mašina parduodama ir pristatoma pagal faktinę ir teisinę būklę („kaip matyta ir patiko“), remiantis fotodokumentacija bei aprašomojo pobūdžio techniniais/komerciniais dokumentais. Pirkėjas turi teisę apžiūrėti prekę prieš atsiėmimą ir prisiima atsakomybę už įrengimą, saugumą ir mašinos naudojimą paskirties vietoje. Išorinė nuoroda: 8533