Prod-Masz Zgr2000/1,2 pirkti naudotą (2 249)

Būklė: geras (naudotas), Wire electrode, aluminium welding wire, aluminium-magnesium alloy welding rod -various manufacturers: -7x Elisental 1.2 mm SG-AlMg5 -1x MTC 1.0 mm AlMg5 Lasdpfx Amjb A Ig Ds Reg -6x ALCAN 1.2 mm S-ALMg5 -1x Thyssen 1.2 mm AlMg4.5Mn -Weight: 7 kg/coil -Price: per piece

Būklė: naudotas, Šaltinis elektrodas, suvirinimo viela, suvirinimo viela, užpildo viela -Suvirinimo viela: MIG suvirinimo viela, tipas S-Al Mg 3 -Skersmuo: 1,2 mm -Matmenys: Ø 300 /100 mm Lodpfxsqxd Dpo Am Roag -Ritės svoris: 7,4 kg

Būklė: labai geros būklės (naudotas), Wire electrode, aluminum welding wire, aluminum welding rod, welding rod made of aluminum-magnesium alloy -Net weight: 7 kg Laodecbkklspfx Am Rsg -Quantity: 1x package available -Total weight: 7.6 kg

Būklė: geras (naudotas), Wire Electrode, Welding Wire, Welding Wire -Material: Stainless Steel Ledpfx Asfw Rv Njm Reag -Manufacturer: Eurotrode, partially used spool of shielding gas wire electrode -Type: M 8820 1.4829 Ø 1.2 mm -Dimensions: Ø 300 /100 mm -Spool weight: 5.1 kg

Būklė: geras (naudotas), Gear motor, electric motor, geared electric motor, worm gear motor, parallel shaft gear motor - Manufacturer: SEW-Eurodrive, gear motor with integrated frequency inverter and brake - Parallel shaft gearbox: Series F - Type: FH67BDT71D4/BMG/MM03/RA1A/KPF6 - Speed: 1.2–6.1 rpm - Power: 0.075/0.37 kW - Protection class: IP54 Laedpfx Amow Hz Nao Rsg - Hollow shaft: Ø 40 x 210 mm - Brake: 5 Nm - Quantity: 4 motors available - Price: per unit - Dimensions: 425/280/H330 mm - Weight: 44 kg/unit

Būklė: geras (naudotas), Side channel blower, side channel compressor, ring blower, vacuum pump, blower -Manufacturer: Elektror, Side channel blower, side channel compressor -Type: SD-4N/S892 -Drive power: 1.2 kW -Speed: 2800 rpm Lsdjww T Ezspfx Am Reag -Flow rate: 2.8 m³/min / 168 m³/h -Compression pressure: 180 mbar -Dimensions (total): 450/360/H370 mm -Weight: 24.7 kg

Būklė: geras (naudotas), Multipurpose winch, grip hoist - Load capacity: max. 1200 kg - Suitable for: rope Ø 10 mm - Quantity: 1 unit available Ledpfx Asdvnb Hom Rsag - Dimensions: 640/150/H370 mm - Weight: 18 kg

Būklė: geras (naudotas), Gamybos metai: 1971, Talpyklų sukamasis įrenginys, katilų sukamasis įrenginys, suvirinimo sukamasis įrenginys, suvirinimo stalas, suvirinimo sukamasis stalas - Gamintojas: Walter Gieseking, talpyklų sukamasis įrenginys suvirinimui, SG1 tipas - Keliamoji galia: 1200 kg - Volelių atstumas: 187–1000 mm - Voleliai: Ø 175 x 50 mm Ledpszgalqjfx Am Rjag - Sukimosi greitis: 0,2 iki 0,85 m/min į dešinę/kairę - Valdymo pultas: rankinis valdymas, apsukų reguliavimas rankiniu ratuku - Atskiri komponentai: žr. nuotraukas - Transportavimo matmenys: 1610/570/A330 mm / 1250/300/A330 mm - Bendras svoris: 217 kg

Būklė: naujas, Gamybos metai: 2026, Būklė nauja Metai 2026 Sandėlio numeris 090202 Pristatymo laikas – iš karto, galimas tarpinis pardavimas Ljdpfxowirx Ds Am Roag Kilmės šalis Turkija Kaina 3600 € Sandėlyje 1 vnt. Maks. lakšto storis – konstrukcinis plienas 1,2 mm Išsikišimas 100 mm Veleno ilgis 140 mm Įrankių kiekis 8 vnt. Volelio skersmuo 62 mm Variklis 0,75 kW Sūkių dažnis 32 1/min Ilgis 900 mm Plotis 450 mm Aukštis 1350 mm Svoris 135 kg Tvirtas lietinis korpusas Variklis su stabdžiu Pakojis Reguliuojamas apatinis volas 8 volelių rinkiniai Pagrindo stovas Eksploatacijos instrukcija VOKIEČIŲ arba ANGLŲ k.

Gamybos metai: 2021, būklė: naujas, Cantilever racking, single-sided, 3.70m height, 1.20m arms, 500kg per arm – New product – Price ex works including loading! 1 racking unit with 4 uprights: €2,255 (net)! Transport price within Germany (excluding islands): €490 (net)! Of course, by omitting or purchasing additional frames, you can build longer or shorter racking units (also by varying the bay distances); this example with 4 frames is simply the most common racking solution! A hot-dip galvanized cantilever racking system, consisting of: Arms: IPE 80 Frames: IPE 180 Uprights (single-sided) approx. 3,700mm high, hot-dip galvanized Base and arm depth 1,200 mm, each with 3 height-adjustable racking arms Load capacity with 600 mm load center: 500 kg per arm / 2,700 kg per upright With 4 uprights per level: 4 x 500 kg = 2,000 kg With longitudinal and diagonal braces, bay width = 1,300 mm; standard is 1.30m – if no deviation is specified, we will supply the racking with a bay width of 1.30m. Other bay widths possible: e.g., 1m, 1.25m, or for a small additional charge, 1.50m or custom sizes! Standard delivery: length of a rack row with 4 uprights approx. 4,000 mm. Lsdpfx Asf Tv T Nsm Roag Delivered complete with all bolts and nuts, without floor anchors. Other configurations (frame height, arm length, arm types, etc.) available! Please contact us!

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: Lsdpfx Asmhhy Nsm Rjag - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with foot section, usable depth 1,200 mm - 27 cantilever arms with a usable depth of 1,200 mm, equipped with deflectors - 9 roof supports with a projection of 1,500 mm, pre-drilled for customer-supplied roof construction (*Excludes timber purlins and trapezoidal sheets for roof construction) - Includes longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts re-orderable and extension possible at any time) - (*Available in larger quantities: approx. 50 uprights in stock) Lajdpfxjh R Taqe Am Rjg Detailed description: - Sturdy steel construction made from IPE profiles - All components’ surfaces are hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (max. snow load 1.85 kN/m², wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (max. snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, 1,200 mm deep, with deflectors = 4 storage levels above each other - Including longitudinal and diagonal bracing with 1,500 mm axle spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load labels C4 in accordance with DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight service with advance delivery notification. Material is packaged for ease of unloading. The foundation must be concrete, level, suitable for doweling, and capable of bearing all imposed loads. Floor conditions and load-bearing capacity as well as any necessary official permits are to be checked and ensured by the customer. The uprights must be anchored to the floor by the customer; wall anchoring is neither required nor recommended. According to trade association guidelines, uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Laodpfxed Tqale Am Rjg Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. Lajdpfx Amofdkbhs Rsg The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level. Laedpfofdkb Tjx Am Reg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! Ljdpfx Ajfdkb Usm Reag - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. Laodpjguk Dksfx Am Reg We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Gamybos metai: 2026, būklė: naujas, Condensation drying of air and, indirectly, of food products (fruit, tea, mushrooms, and similar items) is the most energy-efficient method for removing water from various materials. The system operates on the heat pump principle – by cooling down to vapor temperature, the temperature drops below the dew point, causing moisture from the air to condense on the surface of the evaporator. The heat extracted from the air is immediately returned to the same air, and with the aid of electrical energy required for compressor operation, 20–30% additional heat is generated. - Suitable for drying various types of fruit (apples, plums, apricots, etc.) - Digital control - Automatic ventilation Ljdpjd Atghsfx Am Reag - Equipped with stainless steel mesh trays Technical specifications: - Nominal capacity: 50–100 kg per batch - Power requirement: 1.2 kW, 230 V - Temperature range: 40–60 °C - Material: Stainless steel, Wnr. 1.4301, AISI 304 - Dimensions: 1420 x 800 x 2000 mm - Weight: 200 kg - Trays: 22 pieces (570 x 570 mm) - Drying area: ~7.2 m² - Continuous ventilation - Insulation: 70 mm polyurethane - Closed condensate system, condensate drain Requires minimal maintenance. Suitable for fruit, vegetables, spices, herbs, mushrooms, pasta.

Gamybos metai: 2026, būklė: naujas, Condensation drying of air and, indirectly, of foodstuffs (fruit, tea, mushrooms, etc.) is the most energy-efficient method for removing water from various materials. It operates on the heat pump principle—by cooling to the vapor temperature, the temperature drops below the dew point, causing moisture from the air to condense on the surface of the condenser. The heat extracted from the air is immediately returned to the same air; with the help of the electrical energy required to operate the compressor, an additional 20-30% of heat is generated. - Suitable for drying various types of fruit (apples, plums, apricots, etc.) - Digital control - Automatic ventilation - Equipped with stainless steel wire racks Technical data: - Rated capacity: 25-50 kg per batch - Power requirement: 0.6 kW, 230 V - Temperature: 40-60 °C Lajdpfx Asd Atipom Rjg - Material: Stainless steel, grade Wnr. 1.4301, AISI 304 - Dimensions: 710 x 800 x 2000 mm - Weight: 100 kg - Racks: 11 pieces (570 x 570 mm) - Drying area: approx. 3.6 m² - Continuous ventilation - Insulation: 70 mm polyurethane - Closed condensate system, condensate drainage - Minimal maintenance Suitable for fruit, vegetables, spices, herbs, mushrooms, pasta

Būklė: naudotas, rida: 155 000 km, galia: 51 kW (69,34 AG), pirmoji registracija: 12/2009, kuro tipas: benzinas, kita apžiūra (TÜV): 08/2025, spalva: raudona, pavaros tipas: mechaninis, emisijos klasė: Euro 4, sėdimų vietų skaičius: 4, Įranga: ABS, elektroninė stabilumo programa (ESP), imobilaizerio sistema, oro kondicionavimas, suodžių filtras,

Būklė: naujas, Gamybos metai: 2026, – Talpa 1,2 mm – Kintamos eigos greičio reguliavimas – Su 9 volelių komplektais Laedpfoydhlzox Am Rjg – Pėda valdoma – Su stabdžiu varikliu – Avarinis stabdymas – Dokumentacija – 400V

Būklė: naujas, Sheet thickness 1.2 mm Roll diameter 62 mm Throat depth 100 mm Ledpfx Ajfv H Edem Roag Total power requirement 0.75 kW Machine weight approx. 130 kg Space requirement approx. 1.1 x 0.5 x 1.3 m Machine is equipped with: - Emergency stop switch - Foot switch - 7 sets of rollers

Būklė: naujas, Table length 2400 mm Table width 1200 mm Table height 850 mm Height adjustment 50 mm Machine weight approx. 0.99 t Dimensions L x W x H 2.4 x 1.2 x 0.9 m Welding table "SIEGMUND Professional 750 + plasma nitrided" Lasdpfx Aed Rawyem Rog is manufactured from high-quality S355J2+N steel and is plasma nitrided. Surface hardness max. 750 Vickers. The table has a material thickness of approx. 24.5–27 mm. The holes have a diameter of 28 mm. Hole grid on the table top arranged in a 100 mm spacing, parallel hole grid on the sides in a 50 mm spacing. Incl. basic foot set. Accessories shown are optional. Price indicated is exclusive of packaging and transport.

Būklė: naujas, Stalo ilgis: 2400 mm Stalo plotis: 1200 mm Stalo aukštis: 850 mm Aukščio reguliavimas: 50 mm Mašinos svoris apie 0,99 t Išmatavimai (I x P x A): 2,4 x 1,2 x 0,9 m Suvirinimo stalas „SIEGMUND Professional Extreme 850 + plasminiu būdu nitriduotas“ Pagamintas iš visiškai grūdinto specialios lydinio Siegmund X8.7 įrankinio plieno, plasminiu būdu nitriduotas. Didžiausias paviršiaus kietumas: 850 Vickers. Stalviršio medžiagos storis apie 24,5–27 mm. Skylių skersmuo – 28 mm. Skylių išdėstymas stalo plokštėje 100 mm įstrižoje tinklelyje, Ljdpfx Amsd Raw Ae Reag o šonuose lygiagrečioje 50 mm tinklelyje. Įskaitant pagrindinę kojų įrangą. Nuotraukoje matomi priedai – pasirenkami. Kaina nurodyta be pakavimo ir transportavimo išlaidų.

Būklė: naujas, Table length 1200 mm Table width 1200 mm Table height 850 mm Height adjustment 40 mm Machine weight approx. 0.261 t Ljdpfx Aeftd T Sem Rjag Dimensions L x W x H 1.2 x 1.2 x 0.85 m Welding Table "SIEGMUND Professional 750 + Plasma-Nitrided" Manufactured from high-quality S355J2+N steel and plasma-nitrided. Surface hardness up to 750 Vickers. The table has a material thickness of approx. 11.5 - 13.0 mm. The holes have a diameter of 16 mm. Hole pattern: 50 mm grid on the table top, parallel hole pattern with 25 mm grid on the sides. Basic foot equipment included. Table height 850 mm. Accessories shown are optional. Price stated is exclusive of packaging and transport.