Linijinė Vibracinė Maišymo Svarstyklė 1–4 Produktams pirkti naudotą (105 089)

Būklė: naudotas, Wickman 1-3/4" 6 ašių SN: 16814 Elektromagnetinė sankaba Strypo padavimo ritė su stovu Sriegiklis Drožlių transporteris 6 skersiniai stumokliai 4-oji pozicija: Logan universalus sriegiklis Išvalytas ir perdažytas Neseniai išimtas iš gamybos Patikrintas įjungus Iajdsyzkf Hspfx Aausr Gali būti komplektuojamas pagal jūsų poreikius

Būklė: labai geros būklės (naudotas), Būklė: naudotas, su įprastais naudojimo ženklais, techniškai visiškai tvarkingas Gamintojas: Vetter (Vokietija) Gamybos šalis: Vokietija 📦 Komplektą sudaro: Vetter oro pagalvė oro žarnos su greito sujungimo jungtimis transportavimo krepšys matomas komplektas kaip nuotraukose ⚙️ Techniniai duomenys: Modelis: Tipas 1/13 (VSM 14) Didžiausia keliamosios galios jėga: 65 kN (apie 7,2 tonos) Iaodpfsy Af S Rjx Aauer Maksimalus darbinis slėgis: 1 bar (14,5 PSI) Nominali talpa: 403 l Oro poreikis: 806 l Gamybos metai: 2018 🛠️ Pritaikymas: techninė gelbėjimo tarnyba (ugniagesiai) mašinų ir transporto priemonių kėlimas priežiūros ir pramoniniai darbai avarinės situacijos 📌 Papildoma informacija: garsaus vokiečių gamintojo įranga tvirta, patvari konstrukcija sparčiai ir saugiai kelia sunkias dalis parduodama tiksliai kaip nuotraukose

Būklė: labai geros būklės (naudotas), Siūlau apytakos siurblį iš žinomo gamintojo WILO, modelis TOP-E 40/1-10 su elektroniniu valdymu. Siurblys skirtas šildymo sistemoms, ŠVOK bei pramoniniam naudojimui. Įrengtas elektroninis modulis su ekranu ir veikimo reguliavimu, kuris leidžia optimizuoti energijos suvartojimą ir našumą. 🔧 Techniniai duomenys: Gamintojas: WILO Modelis: TOP-E 40/1-10 Maitinimas: 230V / 50 Hz Tipas: elektroninis cirkuliacinis siurblys Jungties skersmuo: DN40 (apie 40 mm) Izoliacijos klasė: F Apsaugos laipsnis: IP43 Slėgis: PN6 Darbinės terpės temperatūra: iki 110°C Sukimosi greitis: 850 – 2850 aps./min Galia: 30 – 570 W Srovė: 0,45 – 4,80 A 📦 Būklė: Naudotas įrenginys. Matomi normalūs naudojimo požymiai, tačiau techninė būklė gera ir prietaisas pilnai veikiantis. 📌 Papildoma informacija: Elektroninis darbo reguliavimas Aukšta surinkimo kokybė – pagaminta ES Idealus sprendimas centrinio šildymo, pramoninėms ir cirkuliacinėms sistemoms Iedpfxjy Abf Hs Aauoar Tvirta konstrukcija

Būklė: naujas, Siūlau profesionalų statinės siurblį iš garsaus Vokietijos gamintojo Lutz, skirtą darbui su įvairiais skysčiais (chemija, alyvos, pramoniniai skysčiai). ✅ Būklė: ✔️ Naujas Iaodpoyzulwefx Aaujr ✔️ Variklio korpusas pakeistas originaliu (gamykloje pagamintu) – ankstesnis buvo pažeistas transportuojant ✔️ Visiškai veikiantis, paruoštas darbui 🔩 Techniniai duomenys: Gamintojas: Lutz Pumpen GmbH (Vokietija) Siurblio modelis: MP PP 50/41-R DL SS Variklis: MI 4-230 Maitinimas: 220–230 V / 50 Hz Galia: 450–500 W Srovė: 2,5 A Apsaugos klasė: IP24 Vamzdžio ilgis: 1200 mm Medžiaga: PP (polipropilenas) + nerūdijantis plienas (SS) ⚙️ Pritaikymas: pramoninė chemija alyvos, techniniai skysčiai pramonė, dirbtuvės, gamyba statinių ir talpų ištuštinimas 📦 Komplektacijoje: ✔️ Lutz siurblys ✔️ MI 4-230 variklis ✔️ Žarna ir įranga, matoma nuotraukose 🌍 Kilmės šalis: 🇩🇪 Vokietija ℹ️ Papildoma informacija: Aukštos kokybės įranga – vokiška gamyba Puikiai tinka profesionaliam naudojimui Galimas siuntimas arba atsiėmimas vietoje

Būklė: labai geros būklės (naudotas), Parduodamas Kaltenbach Maschinenfabrik elektrinis variklis Kaina nurodyta už 1 vnt. Ijdpfxjyv Uvxj Aauear Naudotas, veikiantis Variklis patikrintas prietaisu Matomi normalūs naudojimo ir sandėliavimo žymės Techniniai duomenys Gamintojas: Kaltenbach Maschinenfabrik Tipas: DKV 112M 238 4 Trifazis variklis Galia: 1,7 / 2,6 kW Įtampa: 400 V 50 Hz Apsaugos klasė: IP54 Izoliacijos klasė: F Sukimosi greitis 700 / 1415 aps./min Daugiagreitis Dahlander variklis Veleno skersmuo apie 28 mm

Būklė: geras (naudotas), For sale: individual units of original deep hole drilling tools from Botek (Germany) – a renowned manufacturer of precision metalworking tools. Single-lip drills with internal cooling, made from K15B carbide – extremely hard and wear-resistant. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the tool body • Material: K15B ultra-fine grain carbide • Suitable for steel, stainless steel, aluminum, bronze, and engineering plastics Ijdpfx Aswg R I Eoauear The drills are designed for precise deep hole drilling with high dimensional stability. Applications include the aerospace, automotive, hydraulics industries, and toolmaking. Condition: New and used (in operation), but in good technical shape. Some may require re-sharpening – an ideal base for professionals. //// PRICE GIVEN PER PIECE /////

Būklė: labai geros būklės (naudotas), Wide belt sanding machine FORMAT 4 Finish 1302 - used - Constant working height thanks to top section adjustment, Combination unit with contact roller and sanding pad, Rubber-coated contact roller, Pneumatic activation of the contact roller, Electronic segmented sanding pad, Digital display for sanding height, Infinitely variable feed speed, Ijdpfxexnm Rco Aauear Automatic carpet centering, Operation via touchscreen display, Air-cushioned sanding pad, Sanding belt oscillation ----- Technical Specifications ----- Working width: 1,300 mm, Number of belts: 2 pcs, Sanding belt size: 1,310 x 2,200 mm, Feed speed: 3.7–16 m/min, Segment width of sanding pad: 55 mm, Max. workpiece thickness: 170 mm, Min. workpiece thickness: 5 mm, Extraction nozzle diameter: 2x200 mm, Motor power: 18.5 kW, Motor power 2nd motor: 15 kW, Dimensions (LxWxH): 1,950x2,250x2,600 mm, Weight: 2,400 kg Quality Information: - Belt run / imbalance checked - Sanding pad checked / reconditioned - Height adjustment checked - Complete basic cleaning - Electrical system checked - Immediately ready for use

Būklė: naudotas, Gamybos metai: 2001, DDS drėkinimo įrenginys Iajdpfx Aajyx A S Hsusr Greičio fiksavimo bėgiai Technotrans aušinimas ir cirkuliacija Be apsukimo Spaudų skaitiklis: 42 mln.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 1 280 mm, bendras plotis: 390 mm, bendras aukštis: 40 mm, 120 pcs. shelf panels approx. 128 x 39 x 4 cm, SSI Schäfer R3000, 2nd choice (new stock) – shelving for workshops, storage racks, small parts storage, boltless shelving, component storage B40/392/70, ZB341315, ZB9414 Specifications: - Length: approx. 128.1 cm - Width: approx. 39 cm - Height: approx. 4 cm Iaodpfxey A Htce Aauor - Quantity: 120 shelf panels SSI Schäfer R3000 - Load capacity: max. 100 kg per shelf panel - Finish: sendzimir galvanized - 2nd choice (new stock) (This is a 2nd choice product, new and unused. 2nd choice means there may be dust deposits, minor scratches, or slight soiling.) - Ex stock Wietmarschen Price: €960.00 net €1,142.40 gross A VAT invoice will be provided. Transport: Delivery can be arranged through our partner haulier on request. The costs depend on postal code. Assembly: Our trained personnel are happy to assist you with the professional assembly and disassembly of your equipment if required. Our recommendation: Let us know your requirements... We are happy to support you in the realization of your projects, from planning and ordering to assembly.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 1 310 mm, bendras plotis: 390 mm, bendras aukštis: 40 mm, 120 pcs. shelf panels approx. 131 x 39 x 4 cm, SSI Schäfer R3000, Grade II (new item) – Shelf racking systems, workshop racks, storage racks, picking racks, boltless shelving, small parts storage B40/392/70, ZB341315, ZB9414 Details: - Length: approx. 131.2 cm - Width: approx. 39 cm - Height: approx. 4 cm - Quantity: 120 pcs. shelf panels SSI Schäfer R3000 - Load capacity: max. 100 kg per shelf panel - Finish: Sendzimir galvanized - Grade II (NEW ITEM) (This is a Grade II product, new and unused. Grade II means there may be dust deposits, minimal scratches, or soiling.) - Available ex stock Wietmarschen Price: €960.00 net €1,142.40 gross You will receive an invoice with VAT shown separately. Shipping: Delivery can be arranged via our partner forwarding agent on request; shipping costs depend on the destination postcode. Assembly: Our trained staff are available to assist you with the professional assembly and disassembly of your facility on request. Our recommendation: Iodpey A Hquefx Aauear Let us know your requirements... We are happy to assist you with your projects, from planning and ordering through to installation.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack used: Bolt system in hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Isdofdkb Topfx Aaujar Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts and extensions can be reordered at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE sections (bolt system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolt-on cantilever arms, standard (equals 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Includes fastening material (excluding floor anchors) - With installation instructions and C4 load labels according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight services with pre-delivery notification. The material is packed for easy unloading. For outdoor installation, the load capacities must be reduced due to wind and snow loads. The substrate must be concrete, level, suitable for dowelling, and capable of absorbing the acting loads. Floor condition and load-bearing capacity, as well as any required official approvals, must be checked and ensured by the customer. The rack uprights must be anchored to the floor by the customer; anchoring to the wall is neither required nor recommended. According to trade association recommendations, the rack uprights should project at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever rack, used: Bolted system, hot-dip galvanized version Scope of delivery: 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms, 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright distance 1,300 mm) Fastening material (bolts, nuts, and washers) - (Delivery time approx. 1 week) - (No damaged parts!) - (Spare parts can be reordered and system can be expanded at any time) - (Offer available for larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Hot-dip galvanized surface - Rack height 4,160 mm - Load capacity per upright 2,250 kg Iaodpfod Tqalex Aauor - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright equipped with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Assembly instructions and capacity signs C4 according to DIN standard included - Expert telephone consultation - Made in Germany - Short delivery time - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with pre-delivery notification. Materials are sensibly packed for easy unloading on site. When installed outdoors, load capacities are reduced due to wind and snow loads. The base must be concrete, level, suitable for anchor fixing, and capable of bearing the loads. The floor condition and load-bearing capacity as well as any required permits must be checked and ensured by the customer. The uprights must be anchored into the floor on site; wall anchoring is neither necessary nor recommended. According to professional association guidelines, it is recommended that uprights extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolted system in hot-dip galvanized design Scope of delivery: 4 racking uprights, height 3,500 mm, with foot section 1,200 mm 12 cantilever arms with 1,200 mm usable depth, standard Incl. longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without floor anchors) - Delivery time approx. 1 week - No damaged parts! - Spare parts reorder and extensions possible at any time - Offer available in larger quantities: approx. 40 uprights in stock Detailed description: - Robust steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - Each upright with 3 bolted cantilever arms, standard (= 4 storage levels) - Load capacity per arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and C4 load plates according to DIN standards Iodpfx Aaefdkb Ueuoar - Expert telephone consultation - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with prior delivery notification. Material is sensibly packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The subfloor must be made of concrete, level, and suitable for anchors, and capable of bearing the relevant loads. The customer is responsible for checking and ensuring the substrate conditions and load-bearing capacity as well as any potentially required official permits. Uprights must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights feature at least a 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2024, Cantilever rack, painted version (RAL 7016 Anthracite): Scope of delivery: - 4 upright frames, height 2.56 m, with base section, 1.0 m usable depth (1.2 m total depth) - 12 cantilever arms, 1.0 m usable depth - Longitudinal and diagonal bracing for 4 m rack length (spacing 1.3 m) - Fastening material (bolts, nuts, and washers) (*No paint damage!) Net price for pickup: €1,490.00 plus VAT Delivery available for an additional charge Detailed description: - Robust steel construction made from IPE profiles (bolt-in system) - Surface painted according to RAL 7016 (Anthracite) - Rack height: 2,560 mm - Load capacity per frame: 1,800 kg - Base section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments Ijdpfjguk A Hjx Aausar - 3 bolted cantilever arms per frame as standard (= 4 storage levels) - Load capacity per cantilever arm: 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Rack length = 4,000 mm - Including fastening material (without floor anchors) - Supplied with assembly instructions and C4 load plates according to DIN standard - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight shipping with advance notification before delivery. The material is packed efficiently to enable easy unloading. The subfloor must be made of concrete, level and suitable for anchoring, and capable of bearing the applied loads. The customer is responsible for checking and ensuring the ground conditions, load-bearing capacity, and obtaining any necessary official permits. Rack uprights must be anchored to the floor on site; wall anchoring is not required and not recommended. According to German professional association guidelines, it is recommended that the upright frames extend at least 500 mm above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Cantilever rack used: Bolted system in hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with foot sections 1,200 mm - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing Ijdjguk Dkepfx Aauear - Including fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-orderable and extensions possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles (bolted system) - Surface hot-dip galvanized - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Includes longitudinal and diagonal bracing for 1,300 mm spacing - Total racking length = 4,000 mm - Including fastening material (without floor anchors) - Comes with assembly instructions and C4 load labels according to DIN standard - Expert consultation by phone - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice prior to delivery. Material is well-packed for easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The substrate must be concrete, level, suitable for doweling, and capable of bearing the loads involved. The client is responsible for ensuring the condition and load-bearing capacity of the floor as well as obtaining any necessary official permits. The rack uprights must be anchored in the floor on site—a wall anchoring is neither required nor recommended. According to professional association recommendations, the rack uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Used cantilever racking: Bolt-together system, hot-dip galvanized version Scope of delivery: - 4 rack uprights, height 3,000 mm with 1,200 mm foot sections Ijdpfefdkbhsx Aauear - 12 cantilever arms with 1,200 mm usable depth, standard - Includes longitudinal and diagonal bracing for 1,300 mm upright spacing - Includes mounting hardware (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts re-order and expansion possible at any time) - (*Offer available in larger quantities: approx. 50 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Hot-dip galvanized finish - Rack height 3,000 mm - Load capacity per upright 2,250 kg - Foot sections and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including mounting hardware (without floor anchors) - Supplied with assembly instructions and load labels C4 as per DIN standard - Professional phone consultation - Made in Germany - Short delivery times - Local collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable shipping with advance notice before delivery. The material is sensibly packaged to enable easy unloading. When installed outdoors, the load capacities are reduced according to wind and snow load. The subfloor must be concrete, level, and suitable for dowelling as well as able to bear the applied loads. The floor condition, bearing capacity, as well as any necessary official permits, must be checked and ensured by the customer. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to trade association recommendations, the uprights should project at least 500 mm above the top storage level.

Būklė: naudotas, Gamybos metai: 2016, Darbinis laukas: X=3300 mm Y=1280 mm Z=150 mm Praėjimo aukštis. Valdymo terminalas: 24" LED spalvotas ekranas. Rankinis terminalas ašių greičio valdymui. Programinė įranga: „Woodflash“. Vakuuminis siurblys 90 m³/val./50 Hz arba 108 m³/val./60 Hz. Frezavimo velenas 12 kW HSK F63 (12 000 aps./min.). 12 vietų linijinis įrankių keitiklis kairėje staklių pusėje + paėmimo vieta. Gręžimo galva DH 16 4H 2S: vertikaliai 12 velenų, horizontaliai 4 velenai, 2 griovelių pjūklai. Sandėlio vieta: Nattheim. Isdpfx Aasxy Tlweusar

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: EAN0729389556525, keliamoji galia: 9 150 kg, keliamoji galia vienai sandėliavimo sekcijai: 3 050 kg, bendras ilgis: 22 800 mm, bendras aukštis: 3 500 mm, apkrova vienai santvarų porai (maks.): 3 000 kg, lentynų eilučių skaičius: 4, rėmo aukštis: 3 500 mm, rėmo plotis: 1 100 mm, lentynos aukštis: 3 500 mm, lentyna ilgis: 22 800 mm, 4 dvigubos zonos padėklų stelažai (M35112711-3) po 5,7 m ilgio, 3,5 m aukščio, 1,1 m gylio, kiekvienas su 2 sekcijomis, po 2,7 m pločio, kiekviename po 3 traversų lygius, lentynos apkrova – 3000 kg. - 12 rėmų (RM3511 - RAL5019) - 24 pado plokštės, tarpinės, tvirtinimo medžiagos - 48 grindų ankeriai (ZZBA1210) - 48 viengubų traversų (T2711 - RAL2008) - 4 apkrovos lentelės (BSMcP) Rėmai varžtiniai, nesurinkti. Transportavimas / pristatymas: - iki 20 darbo dienų po apmokėjimo - pristatymas į statybvietę/montavimo vietą Iajdoyz Iccopfx Aausr - iškrovimą iš sunkvežimio atlieka pirkėjas su nuosava kėlimo įranga - pristatymas galimas visoje Vokietijos teritorijoje, išskyrus salas! Pristatymas į ES valstybes pagal individualų susitarimą.

Būklė: naudotas, Gamybos metai: 2016, Used Machine Cross-grain sanding machine Year of manufacture: 2016 Product Advantages Beneath every perfectly painted, stained, or oiled wooden surface lies an impeccably sanded substrate! Felder sanding machines are characterized by robust construction, state-of-the-art technology, and maximum productivity. Key Highlights at a Glance: - Sanding width: 1350 mm - Sanding thickness: 3–170 mm - Combined superfinish unit - Touch-screen control for all operations - The Felder operating concept ensures maximum process and operational safety Your advantages at a glance: Time Savings Iedpfx Aow I Uv Ueausar - Motorized adjustment of the contact roller to 0.01 mm from the control panel - Innovative unit arrangement for pre- and fine sanding of veneered workpieces - Brush units at machine outfeed - Lacquer sanding as an optional feature Convenience - Fixed infeed table height (machine head adjusts) - Touch screen control with clear image display and program memory - Machine data logger for sanding belt wear and more - Tool-free sanding belt changes - Large, foldable table extensions for heavy workpieces Flexibility - Units for calibration, fine sanding, or lacquer sanding - Variable feed speed up to 20 m/min via inverter Innovation - Electronically segmented sanding shoe with silicone technology for minimal air consumption - Combined superfinish unit including chevron glide belt to eliminate oscillation marks Quality - Heavy-duty machine construction - Durable machine components Standard Equipment - Finish 1350 Classic control - Control unit with 7” color touchscreen, 100 program memory slots, maintenance interval reminders - Alphanumeric error messages - Ammeter for load monitoring Feed Table - Fixed infeed height, stationary table at 900 mm - Electric height adjustment of units, fine-tuning from the control panel - Infinitely variable feed speed 2.8–20 m/min adjustable by inverter from the control panel - Hand protection and over-thickness workpiece safety device - Workpiece detection sensor with 25 sensors, 55 mm segment width - Endless treadmill-style feed belt with honeycomb structure - Automatic feed belt centering Cross-sanding unit Finish 1350C High Gloss - Segmented, electronically pneumatic sanding shoe (ESC), segment width 25 mm, including quick-change system - Chevron glide belt between sanding pads for uniform finishes without oscillation marks - Variable pressure adjustment on operator side - Electro-pneumatic sanding belt oscillation - Electronic belt tracking safety device - 1 Motor with 7.5 kW (10 HP) - Star-delta start-up - Cleaning blower with timer control - Cutting speed 12 m/sec - Sanding belt size: 140 x 4560 mm Combined Superfinish Unit 1350C: - Rubberized, grooved contact roller with 85–90° shore hardness and 142 mm diameter - Electromechanical position-controlled grit compensation - Segmented, electro-pneumatic sanding shoe ESC, segment width 25 mm, including quick-change system - Variable pressure adjustment on operator side - Chevron glide belt between sanding pads and sanding belt for uniform finishes without oscillation marks - Mechanically preloaded rubber pressure rollers - Electro-pneumatic sanding belt oscillation - Electronic belt tracking safety device

Būklė: naudotas, Gamybos metai: 2014, Naudota mašina Pagaminimo metai: 2014 Įranga ir techniniai duomenys: - Darbinis plotas X: 3 740 mm - Darbinis plotas Y: 1 570 mm - Darbinis plotas Z: 350 mm - 4-a ašis: yra - 5-a ašis: 5 ašių verpstė, variklis 12 kW - Su papildomu C ašies užraktu - Įrankių keitimo vietos: 24 su lėkšteliniu keitikliu; 10 mašinos stovo kairėje pusėje - Vertikalios gręžimo verpstės: 12 Iasdpfjx Hllxox Aauer - Mašinos stalas: konsolinis stalas - Stalo pozicionavimo automatas: yra - 6 ruošinio atramos tipo e-motion - Speciali ruošinio prispaudimo sistema rėmams - Programinė įranga: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 apdirbimo laukai svyruojančiam užkrovimui - Su automatine centrine tepimo sistema - Su mobiliu valdymo pultu su PC monitoriumi - Su valdymo spintos kondicionieriumi - Su vakuuminiu siurbliu 90 m³/h - Su rankiniu valdymo įrenginiu - Įskaičiuota: 12 rėmo spaustuvų, 8 dideli ir 4 vidutiniai siurbtukai Prieinamumas: greitas Vieta: Röllbach

Būklė: labai geros būklės (naudotas), Parduodama profesionali KOMET KFK 1 M02 02360 išplėtimo galvutė su mikrometriniu reguliavimu – aukščiausios klasės įrankis preciziškam skylių apdirbimui pramoninėje gamyboje ir įrankių gamyboje. Būklė labai gera – įrankis visiškai veikiantis, paruoštas darbui. Tiksli mikrometrinė skalė leidžia reguliuoti iki 0,01 mm tikslumu, užtikrinant aukščiausią paviršiaus kokybę. • Gamintojas: KOMET • Modelis: KFK 1 – M02 02360 • Tvirtinimas: SK40 / DIN 69871 • Skalė: mikrometrinė 0,01 mm • Pritaikymas: preciziškas skylių išplėtimas ir apdirbimas • Būklė: naudota – labai gera techninė ir vizualinė būklė Ijdpfxoxk T H Nj Aauear

Būklė: naudotas, Gamybos metai: 2017, veikimo valandos: 1 800 h, No. 3131 CNC Machining Center FORMAT-4 profit H10 22.43 Used, year of manufacture: 2017 Operating hours: approx. 1,800 h Package consisting of CNC machining center FORMAT-4 profit H10 22.43, loading unit FORMAT-4 L-Motion, and extraction system FELDER RL 300 Technical Data – CNC Machining Center FORMAT-4 profit H10 22.43: - Matrix table system made of phenolic resin - Grid table with two stop rows - Automatic central lubrication - HARDWARE control computer - Mobile control console - Handheld terminal for remote axis control - Two vacuum pumps, rated output 2 x 250 m³/h - Tool changer with 10 tools - Tool changer on the left in the machine frame: 8 tool positions for HSK - Milling spindle 12 kW (S6) HSK F63, 24,000 rpm - Central extraction via combined connections (D = 250 mm) - Woodflash software German version (H20/H08/H10/H50) - Axis travel path H10 22.43: X = 5,230 mm / Y = 2,560 mm / Z = 280 mm - Working area: X = 4,300 mm / Y = 2,160 mm / Z = 105 mm - Axis positioning speed: X = 100 m/min / Y = 100 m/min / Z = 30 m/min Technical Data – Loading Unit FORMAT-4 L-Motion: - Year of manufacture: 2017 - 2-axis design with 4 storage positions for feeding a H10 with lift table - CNC loading - Gentle transport - Fully automatic panel handling - Workpiece sizes: Length 2,000–4,200 mm / Width 600–2,100 mm / Thickness from 8 mm / Panel weight 200 kg - Density: Chipboard 650 kg/m³ / Raw MDF 750 kg/m³ - Stack height 1,800 mm Technical Data – Extraction System FELDER RL 300: Isdpfxorrh T As Aausar - Year of manufacture: 2023 - Rated volume flow 6,000 m³/h, H3 GS dust-tested, JET cleaning - Compressed air connection 3/4-inch - Connection pressure 7–12 bar at 40 NL/min - Operating pressure in device: 6 bar - Chip container capacity: 500 l - Extinguishing device with dry powder extinguisher 12 kg Sale on behalf of customer, ex location Leipzig, without dismantling, without transport or installation Subject to errors in description and price Dismantling and loading by us available as an option To avoid misunderstandings, on-site inspection by appointment is possible and recommended Sale in as-is condition Technical specifications, condition descriptions, year of manufacture, and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: “sold as inspected” Images and videos are sample representations and do not reflect the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before collection or shipping Delivery terms: ex works

Būklė: naudotas, Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, galia: 19 kW (25,83 AG), įėjimo įtampa: 400 V, įėjimo srovė: 40 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, X ašies eiga: 4 000 mm, Y ašies eiga: 1 970 mm, Z ašies eigos atstumas: 450 mm, ruošinio ilgis (maks.): 3 000 mm, ruošinio plotis (maks.): 1 500 mm, ruošinio aukštis (maks.): 250 mm, ašių skaičius: 5, Įranga: dokumentacija / vadovas, Siūlome šį naudotą Format-4 PROFIT H350 16.30 perdirbimo centrą su pravažiavimu, pagamintą 2019 metais. Iasdpfx Aasyw H A Hjusr

Būklė: naudotas, Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, galia: 18 kW (24,47 AG), įėjimo įtampa: 400 V, įėjimo srovė: 40 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, Įranga: CE žymėjimas, dokumentacija / vadovas, Siūlome šį naudotą FORMAT-4 PROFIT H200R 13.33 pravažiavimo apdirbimo centrą, pagamintą 2022 m. Iodpfsyvtq Uox Aaujar

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, WEISHAUPT GL5 / 1-D, su dujų trasa - Galia: 200–940 kW - 20–79 kg/val. Isdswgyifjpfx Aauear - Pagaminimo metai: 2003 - Vykdymas: ZD