4+1 VELENO AUTOMATINĖ FREZAVIMO MAŠINA

Steton FAST-5S

Sąlyga: labai geros būklės (naudotas), Technical specifications: Refurbished in 2024 Working length: 3100 mm Nlodpfx Aov Tcnlsdusi Distance between uprights: 2760 mm Pressing force: 220 t CNC control: OPERATOR II Controlled axes: Y1/Y2; X1/X2; R1/R2; Z1/Z2 automatic crowning motorized adjustable backgauge Throat depth: 650 mm Stroke: 200 mm Working height: 960 mm Motor power: 17 kW CE marking Dimensions (L x W x H): approx. 3700 x 2400 x 2900 mm Weight: approx. 15 tons The seller assumes no liability for typographical or data transmission errors. The machine’s appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Sąlyga: geras (naudotas), Gamybos metai: 1996, KRÜSI Chalet Construction Machine / Log House Production Line Type CM 40 Manufacturer: Krüsi Maschinenbau AG, CH-9105 Schönengrund AR Year of manufacture: 1996 Condition: Good, technically inspected and cleaned / ready for operation Operating principle Processing of timber for chalet construction / log house production. Beams can be processed in a single pass. • Cross-cutting • Horizontal and vertical milling of notches/grooves in a single clamping • Drilling • Milling of end grooves Workpiece: • Max. cutting height: 200 mm • Max. cutting width: 250 mm Rugged welded steel construction. Machine (horizontal and vertical milling units) equipped with 4 special milling motors, hardened and ground guides for maximum processing accuracy. Carriage guided by dust-protected, preloaded ball bearing guide rollers. Nsdpeu Uh T Dofx Adueli Working range up to 200 x 250 mm. Fully operational, with contactor control system; motors protected by thermal relays. Electrical equipment for 380 V, 50 Hz, with protective covers, central connection for customer-provided chip extraction system; includes 2 eccentric clamps; no milling tools (rebate cutter). Features electro-hydropneumatic horizontal and vertical feed, synchronized with the start of the milling motors. Rapid traverse and feed rate steplessly adjustable. Fully wired and installed, including air service unit. Beams thicker than 14 cm must be processed in two passes; for these beams, the workpiece must be fed again to the extent of the excess thickness for further milling. Machine guards over all moving parts with gas spring counterbalance. Machine description / equipped with: 1. Saw unit: Manual feed Spindle adjustment with analog scale display Max. saw blade Ø / bore Ø: 400 / 30 mm Tungsten carbide tipped with chip depth limiter (uni-directional) Adjustable riving knife Motor speed min⁻¹: 2900 Power (kW): 2.2 2. CM milling unit (log house unit): Hydropneumatic feed Spindle adjustment with digital scale display Horizontal milling unit: Cutter Ø: 180 mm Max. cutter width: 130 mm For cutter width >60 mm only use aluminum alloy cutters with indexable inserts. 2 x hydropneumatic feed motors, each 2.2 kW Hydropneumatic feed; rapid traverse and working feed rate steplessly adjustable. 3. Drilling unit: Manual feed Spindle adjustment with analog scale display Drill chuck: ER 25 collet Max. clamp Ø: 16 mm Max. drill Ø: 32 mm Motor speed min⁻¹: 1450, Power (kW): 1.8 4. End milling unit: Hydropneumatic feed Spindle adjustment with digital scale display Max. cutter Ø: 230 mm Max. cutter width: 60 mm Motor min⁻¹/2900, 3.0 kW 2 V-belts SPZ 9.5x1000 La Pneumatics Required operating pressure min/max. MPa (bar): 0.7/1 (7/10) Air consumption: 8 Nm3/h Electrics Operating voltage V/Hz: 380 V, 50 Hz Rated power: 8.8 – 15.8 kW depending on configuration Customer-supplied fuse: 3 x 25 A (slow-blow) Max. simultaneous power demand: 4.4 kW Dimensions Machine width: 2400 mm Machine depth: 1600 mm Total height, guard lowered: 1600 mm Total height, guard raised: 2200 mm Extraction port Ø (under-floor extraction) Weight: approx. 1300 kg Including roller conveyor 2 x 6 m (2 x 4 m) Technical data subject to change!

Sąlyga: naujas, Gamybos metai: 2025, Compact Concrete Batching Plant PROMAX C60-SNG L (60m³/h) Type: Compact concrete batching plant with single-shaft mixer Capacity: 60 m³/h of fresh concrete Mixer capacity: 1500/1000 liters (1m³ of compressed concrete) Central lubrication system brand: ILC (Made in Italy) Control system: Fully automatic PC - PLC - Printer. Electronic equipment: Siemens Other equipment and accessories: Italian made Unlimited users and remote access Very low transport costs: Two containers. Installation and commissioning of the plant is our responsibility. We provide excellent after-sales service. 24/7 SERVICES. Export of more than 1000 concrete production plants to over 90 countries worldwide. * LOW SHIPPING COSTS (two 40F-OT containers or two standard trailers) * FAST INSTALLATION Nedpfjflz Hfjx Adusli * EASY AND SIMPLE TO USE

Sąlyga: naudotas, Number of spindles: 6 pcs. Nlsdpjvnv Uzjfx Aduji Working width: 240 mm Planing height: 200 mm Surface table length: 2500 mm Feed motor: 4 kW Feed speed: 6-36 m/min Dimensions (L x W x H): 5000 x 1750 x 1700 mm SCM Superset PLUS Comp. 31, also suitable for window production ----- The machine has been cleaned and functionally tested! Technical data: ----- Maximum working width: 240 mm Maximum working height: 200 mm Feed: 6 to 36 m/min 1st spindle ----- First lower spindle, horizontal Motor with brake: 11 kW Diameter: 40 mm Speed: 6,000 rpm 2nd HSK tool holder ----- First right tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning 3rd HSK tool holder ----- First left tool holder, vertical Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 4th spindle ----- First upper spindle, horizontal Motor with brake: 11 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 5th spindle ----- Second upper spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Electronic tool diameter setting (setup) 6th spindle ----- Second lower spindle, horizontal Motor with brake: 7.5 kW Speed: 8,300 rpm Vertical and horizontal electronic positioning Additional technical features: ----- 2 feed units after the upper spindles to reduce the axle spacing from 620 mm to 450 mm Air-cushion lubrication on the worktable 2 x milling units with belt drive and quick-change HSK 85 system in positions 2 – 3 Working height of 200 mm instead of 120 mm 5 x electronic horizontal positioning positions (2 – 3 – 4 – 5 – 6) + (31.14.05 tandem feed after position 2) 4 x electronic vertical positioning positions (2 – 3 – 5 – 6) 3 x electronic tool diameter setting (setup) positions (3 – 4 – 5) Mobile 10 control PRL equipment for cutting out the glazing bead on 2nd upper horizontal spindle Machine is supplied without processing tools (Technical data according to manufacturer's information—no guarantee!)

Sąlyga: naudotas, Gamybos metai: 1998, Spaudimas 175 t Nedpfstv Rh Aex Adueli Lenkimo ilgis 4050 mm Statramių atstumas 3050 mm Iškyša 300 mm Eiga 240 mm Eigos greitis – žemyn be apkrovos maks. 140 mm/sek Darbo greitis maks. 9 mm/sek Eigos greitis – grįžimas maks. 130 mm/sek Atstumas tarp stalo ir slankiklio min. 370 – maks. 610 mm Valdymas CYBELEC DNC 880S Bendra galingumo paklausa 15 kW Staklių svoris apie 15 t Užimama vieta apie 5,89 x 3,6 x 3,16 m Įranga: - valdomos ašys: Y1, Y2, X, R - CNC bombiravimas - CYBELEC DNC 880S valdymas – pasukamas valdymo pultas, priekyje dešinėje - 4 rankiniu būdu reguliuojamos atraminės pirštos - Kojinis jungiklis - 1 viršutinio įrankio rinkinys - 1 apatinio įrankio rinkinys - 2 priekinės medžiagos atramos - Šoninė ir galinė apsauga - Naudojimo instrukcija

Sąlyga: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Lijn voor het vullen en sluiten van glazen potten. Uitgerust met 12 vulkoppen en 4 sluitkoppen. Nledjtqmvrspfx Aduei

Sąlyga: beveik kaip naujas (naudotas), Double-shaft multirip saw A. COSTA PUMA 2/50 350/160 – Italian manufacture TECHNICAL PARAMETERS: cutting width: 350 mm cutting height: 160 mm motors: 37 and 45 kW feed motor: 3 kW lower shaft width adjustment Nsdsqy E Rljpfx Aduoli maximum blade diameter: 280 mm spindle diameter: 2 x 60 mm sleeve diameter: 2 x 80 mm track width: 350 mm total power: 85 kW two feed speeds: 15 and 22 m/min central lubrication minimum workpiece length: 600 mm electric height adjustment top and bottom shaft height adjustment six upper pressure rollers mechanical roller pressure town anti-kickback pawls cast iron frame extraction port diameter: 2 x 220 mm spindle speed: 4500 RPM machine dimensions (L/W/H): 250 / 235 / 210 cm weight: ~ 5000 kg

Gamybos metai: 2000, Sąlyga: paruoštas naudoti (naudotas), SINGLE SCREW EXTRUDER GRAEWE-FANGLI 60X33 Application: PE PIPES or PP PIPES Type: 60 X 33 Year of manufacture: 2000 Screw diameter: 60 mm Drive: 75 kW Output capacity PE: approx. 200 – 250 kg/h Condition: Good, ready for operation Nedpfxoifgwho Adujli The extruder is my property Sachal Extrusionmachines Bahnhofstrasse 6 D-26345 Bockhorn/Grabstede Germany

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2013, varžto skersmuo: 38 mm, This machine is in storage at Plastima Used Machinery. Nodevcqccspfx Adueli

Gamybos metai: 1999, Sąlyga: naudotas, The DSG 200 vertical sawmill is the ideal option for woodworking facilities specializing in furniture and wooden flooring production; it is efficient and performs reliably in operation. A used Wintersteiger mini sawmill is a very sound investment. A major advantage of this machine is that it does not take up as much space as standard equipment of this type, while still excelling in material processing. It is used for cutting individual elements and matching them to the desired sizes. The machine is easy to operate and can be mastered quickly. The greatest asset of our sawmill is its extensive equipment, featuring primarily a blade spraying system controlled from the panel, enabling precise cutting of wet material. It features independent adjustment of the upper rollers’ height, allowing for quicker cutting height settings. Pneumatic feed pusher assists the feed process. TECHNICAL DATA: -Total power: 27.3 kW -Air Jet system motor: 2.3 kW -Siemens control panel -Feed rate up to 2 m/min -Sawmill frame stroke: 210 mm -Strokes per minute: 400 Nedpfx Ajtvm Hdoduoli -Cutting height: steplessly adjustable (smoothly) on our frame: 45–250 mm -Maximum achievable cutting height: 400 mm! -Cutting width under side pressure: 80–205 mm -Minimum block length: 250 mm -Lamella thickness: from 1.5 mm – depending on wood type and cutting height -Kerf for used blades: 0.9–1.1 mm depending on cutting height -Length: approx. 5000 mm -Width: approx. 1300 mm -Height: approx. 2600 mm -Weight: 5000 kg Pneumatic feed pusher assists the feed process The machine is supplied with: -Complete large saw blade frame -Small saw blade frame -Frame pins -Frame tensioning wedges -Blade spacers -Blades for wet cutting -Blades for dry cutting -Set of upper feed rollers -4 lower feed rollers -Set of slides -Frame yokes -Pocket cutting guides -Loading magazines -DTR documentation -Electrical diagram