Kraussmaffei 1600-8100Mx pirkti naudotą (3 252)

Gamybos metai: 1999, būklė: paruoštas naudoti (naudotas), Parduodama dviejų komponentų liejimo mašina Krauss Maffei Multinject. Užspaudimo jėga: 3500 kN, plokščių matmenys X/Y: 1280 mm/1190 mm, antrasis agregatas: 390CZ. Mašinos matmenys X/Y/Z: apie 6300 mm/2000 mm/3100 mm, svoris: apie 17000 kg, valdymas: Krauss Maffei MC4, darbo valandos: 78424 h. Valdymas sugedęs. Dokumentacija yra. Apžiūra vietoje galima. Gsdpfjxx Uf Aox Al Neud

Gamybos metai: 2000, būklė: paruoštas naudoti (naudotas), Two Krauss Maffei injection moulding machines available: 1) Krauss Maffei KM 50 C1, year of manufacture: 1999, injection unit: SP220, screw diameter: 30mm, L/D ratio: 23, injection pressure: 2500bar, shot volume: 85cm³, machine dimensions (L/W/H): approx. 3200mm/1350mm/1800mm, weight: approx. 2500kg, control system: MC4, operating hours: approx. 86,000h. 2) Krauss Maffei KM 125 C1, year of manufacture: 2000, injection unit: SP520, screw diameter: 45mm, L/D ratio: 20, injection pressure: 1878bar, shot volume: 217cm³, machine dimensions (L/W/H): approx. 4500mm/1550mm/2200mm, weight: approx. 5500kg, control system: MC4, operating hours: approx. 82,000h. Documentation available. Inspection on site possible. Gjdjw Emybspfx Al Noud

Gamybos metai: 1998, būklė: paruoštas naudoti (naudotas), Clamping force: 1500 kN, screw diameter: 50 mm, tie bar spacing: 500 mm, platen dimensions X/Y: 780 mm / 790 mm, opening stroke: 600 mm, daylight: 900 mm, ejector stroke: 150 mm, shot volume: 305 cm³, shot weight: 278 g, injection pressure: 2336 bar. Machine dimensions X/Y/Z: approx. 4700 mm / 1550 mm / 2200 mm, weight: approx. 7000 kg, control system: MC4. Including Sepro handling. Documentation available. On-site inspection possible. Guodpfx Ajw Hthzol Nod

Gamybos metai: 2016, būklė: paruoštas naudoti (naudotas), A total of 9 partially dismantled injection moulding machines by Krauss Maffei are available. 1) Krauss Maffei 175-520-390 CZ, year of manufacture: 2008. 2) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 3) Krauss Maffei 110-380 CX, year of manufacture: 2016. 4) Krauss Maffei 420-700-520 CZ, year of manufacture: 2008. 5) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008, missing electrical components. 6) Krauss Maffei 650-1000-520 CZ, year of manufacture: 2008. 7) Krauss Maffei 850-1400-1000 MX Z, year of manufacture: 2012, missing electrical and mechanical components. 8) Krauss Maffei 110-380 CX, year of manufacture: 2016, missing electrical components. All injection moulding machines are supplied with robots from Kuka, Krauss Maffei, SAR, or Sepro. Documentation available. On-site inspection possible. Godpfxougmx Aj Al Noud

Būklė: naudotas, Gamybos metai: 2005, Technical details: Screw diameter: 90 mm Shot weight in polystyrene: 1,758 g/PS Clamping force: 6,500 kN Approx. machine weight: 32 t Gsdstunccepfx Al Nsud From serial production

Būklė: geras (naudotas), spaudimo jėga: 3 000 kN, Gamintojas: KraussMaffei Modelis: KM 300-1400 C2 Mašinos tipas: Hidraulinė liejimo mašina Metai: 1999 Uždarymo jėga: 3000 kN Tarptautinis dydžio žymėjimas: KM 1400 C2 / 300 Mašinos svoris: 12 500 kg CE žymėjimas: yra Godpfjytnnzjx Al Njud Yra 2 vnt. Daugiau informacijos pagal užklausą.

Būklė: geras (naudotas), Gamybos metai: 1999, spaudimo jėga: 2 000 kN, Gamintojas: KraussMaffei Kunststofftechnik München Modelis: KM 200-700 C2 Mašinos Nr.: 174406 Tarptautinis dydžio žymėjimas: 700 C2 / 200 Metai: 1999 Uždarymo jėga: 2000 kN Uždarymo jėga: 200 t Įpurškimo agregato dydis: 700 Gjdpfjytiqwjx Al Noud Mašinos svoris: 8800 kg Vieta: Freiburgas

Būklė: geras (naudotas), Gamybos metai: 2002, spaudimo jėga: 1 100 kN, Gamintojas: KraussMaffei Kunststofftechnik München Modelis: KM 110-390 C2 Mašinos Nr.: 1141268 Užsakymo numeris: 646749/1 Pagaminimo metai: 2002 Uždarymo jėga: 1100 kN Uždarymo jėga: 110 t Guodpsytipasfx Al Nsd Tarptautinis dydžio žymėjimas: 390 C2 / 110 Liejimo agregato dydis: 390 Darbinė įtampa: 400 V Fazės: 3 Dažnis: 50 Hz Bendroji srovė: 164 A Pagrindinis saugiklis: 200 A Variklio srovė: 37 A Mašinos svoris: 5800 kg Vieta: Freiburgas

Būklė: geras (naudotas), Gamybos metai: 1999, spaudimo jėga: 650 kN, Gamintojas: KraussMaffei Kunststofftechnik München Gusdpfx Aoytik Rsl Nsd Modelis: KM 65-160 C2 Uždarymo jėga: 650 kN Mašinos Nr.: 641070 Užsakymo numeris: 643883/1 Pagaminimo metai: 1999 Tarptautinis dydžio žymėjimas: 160 C2 / 65 Darbinė įtampa: 400 V Fazės: 3 Dažnis: 50 Hz Bendroji srovė: 153 A Pirminis saugiklis: 160 A Maks. variklio srovė: 30 A Mašinos svoris: 3200 kg Vieta: Freiburg

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, Poliuretano apdorojimo formų laikiklis, pasukamas universalus formų laikiklis, geros arba labai geros būklės, su valdymu ir hidrauline pavara, spaudimo plotas apie 1250 x 1400 mm, lygiagretus eigos ilgis 200 mm, su papildoma tarpine plokšte (daugiau, bet ne įtrauktos į pasiūlymą), atsidarymo plotis 897 mm, pasukimo kampas 40°, matmenys aukštis x plotis x gylis 2410 x 1863 x 3310 mm, apsauga per šviesos užtvaras, apžiūra galima pagal susitarimą, brėžiniai ir daugiau techninių duomenų pagal užklausą. Gusdpfxexqmnao Al Njd

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2007, veikimo valandos: 27 000 h, spaudimo jėga: 6 500 kN, Krauss Maffei KM650-3500 C2 injekcinio liejimo mašina parduodama. Mašina yra labai geros būklės, naudota tik vienos pamainos režimu ir tik mažoms serijoms bei pavyzdžiams gaminti. Neseniai sumontuota nauja hidraulinė pompa (apytiksliai 300 darbo valandų). - 27 000 darbo valandų - Gamybos metai: 2007 - MC4 valdymo sistema - Šerdžių ištraukimas iš abiejų pusių - Tempimo strypai ir kreipiančiosios visiškai nepažeistos, kaip naujos - Robotas su išilginio paėmimo įranga (LR300) ir konvejerio juosta Gsdsyn Sc Espfx Al Njud - Proporciniai vožtuvai, HPS sraigtas, bimetalinis cilindras - Bendras svoris apie 30 000 kg - Atidarymo eiga: 1 150 mm Adapterinės plokštės taip pat prieinamos pas mus. Galima apžiūrėti prijungus prie elektros. Papildoma įranga, tokia kaip Motan džiovintuvai, šalytuvai ir kt., galima pagal užklausą. Pagal susitarimą, mes galime demontuoti ir pakrauti įrenginį. Laukiame Jūsų užklausos.

Būklė: geras (naudotas), Gamybos metai: 1997, veikimo valandos: 92 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 250 kN, bendras svoris: 6 300 kg, Krauss Maffei KM125-520 C1 injection moulding machine for sale. Gusdpfx Aow Hyd Njl Nod Includes SEPRO robot. Equipped with shut-off nozzle and Stäubli quick clamping system. Clamping unit: Clamping force: 1,250 kN Max. mould opening force: 70 kN Moving platen opening force: 35 kN Moving platen closing force: 28 kN Mounting platen (H x V): 745 x 770 mm Daylight between tie bars (H x V): 470 x 470 mm Mould opening stroke: 600 mm Minimum mould installation height: 300 mm Maximum opening width: 900 mm Ejector stroke: 150 mm Ejector force forward/back: 22/10 kN Injection unit: Screw diameter: 40 mm L/D ratio: 23 Injection pressure: 2,377 bar Shot volume: 217 cc Shot weight (PS): 198 g Injection flow: 126 cc/s Screw speed: 307 rpm Electro-hydraulic equipment: Pump motor rated power: 18.5 kW Installed heating capacity: 13 kW Cylinder heating control zones: 5 Oil capacity: 345 litres Dimensions and weights: Required space approx. 4.50 x 1.60 x 2.20 m Total weight approx. 6,000 kg Max. mould weight: 1,485 kg If you have further questions, please feel free to contact us at any time.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 30 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 95 mm, darbinio tūrio: 3 367 cm³, Clamping force: 8000 kN Maximum tool opening force: 560 kN Moving platen drive force (open): 89 kN Moving platen drive force (close): 92 kN Clamping plate (H x V): 1600 x 1550 mm Clear space (H x V): 1120 x 1000 mm Mould opening stroke: 1600 mm Mould installation height min./max.: 500 / 1100 mm Maximum opening width: 2100 mm Ejector stroke: 300 mm Ejector force fwd/rev: 200/100 kN Injection Unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection rate: 690 ccm/s Screw speed: 116 rpm Plasticising rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic Equipment: Pump motor rated power: 90 kW Installed heating capacity: 53 kW Guodpfx Aloymn Rvo Njd Cylinder heating control zones: 7 Oil capacity: 1500 ltr. Dimensions and Weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44500 kg Max. mould weight: 12200 kg Accessories: - Vibration-damping elements Additional equipment: - 1 x air valve - Tie bar retraction device - 3 x hydraulic core pullers at moving platen - 2 x hydraulic core pullers at fixed platen - 20 x hot runner control zones - Robot interface according to Euromap 67

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036946, spaudimo jėga: 800 kN, varžto skersmuo: 40 mm, darbinio tūrio: 201 cm³, įpurškimo slėgis: 1 860 juosta, injekcijos svoris: 183 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 850 mm, bendras svoris: 5 600 kg, šildymo galia: 11,5 kW (15,64 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 735 mm, įrankio svoris: 600 000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, is the perfect entry-level solution for fully electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, user-friendly operation, and short lead times. Suitable for a wide range of applications, such as the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad range of applications – High energy efficiency thanks to an all-electric machine concept – Short delivery times made possible by the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 380 PA G01 (Order 38670023) CONTROL SYSTEM - MC P1 with 15" TFT colour screen featuring multi-touch functions CLAMPING UNIT - Clamping force: kN 800 - Max. mould opening force: kN 120 - Clear width (h x v): mm 470 x 420 - Mounting plate (h x v): mm 610 x 560 - Mould installation height min. - max.: mm 150 - 400 - Opening width: mm 750 - Max. mould opening stroke: mm 350 - Ejector drive: electric - Ejector stroke: mm 100 - Ejector force fwd/rev: kN 22 / 22 - Ejector speed fwd/rev: mm/s 300 / 300 - Max. mould weight: kg 600 INJECTION UNIT - Screw diameter / type: mm 40 / standard - Effective L/D ratio: 20.0 - Injection pressure: bar 1860 - Stroke volume: cm³ 201 - Shot weight at max. stroke (PS): g 183 - Injection speed: mm/s 200 - Injection flow: cm³/s 251 - Screw drive / speed: 1/min 334 - Plasticising rate (standard): g/s 24.7 - Nozzle contact force: kN 34 ELECTRICAL PARAMETERS - Connected load: kW 20.6 - Installed heating capacity: kW 11.5 - Power supply: V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS - Net weight (with control cabinet): t 5.6 - Length x width x height: m 4.75 x 1.67 x 1.85 ADDITIONAL EQUIPMENT - Low-wear plasticising system - BluePower full insulation for plasticising cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot-runner shut-off, single - Electrical interface for cascade control, 4x - Euromap interface for handling, E18, E63 - Euromap interface (central computer), E67, E77 - Water manifold, 4x - Automatic central lubrication - Adaptive Process Control (APC) - Injection-compression moulding control - Graphics analysis package Gjdpoud H Dmsfx Al Noud The machine is located at our Parsdorf facility and is available at short notice. Further optional extras are available on request. We look forward to your enquiry.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61037337, spaudimo jėga: 800 kN, varžto skersmuo: 30 mm, darbinio tūrio: 113 cm³, įpurškimo slėgis: 2 500 juosta, injekcijos svoris: 103 g, formos aukštis (min.): 400 mm, išmetimo jėga: 22 600 N, išstūmimo eiga: 150 mm, atvērimo eiga: 900 mm, bendras ilgis: 3 960 mm, bendras plotis: 1 480 mm, bendras aukštis: 2 020 mm, bendras svoris: 3 550 kg, šildymo galia: 10,9 kW (14,82 AG), pavaros tipas: Hadraulisch, laisvas tarpatramis: 470 mm, įrankio svoris: 1 000 000 g,

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036936, spaudimo jėga: 800 kN, varžto skersmuo: 35 mm, darbinio tūrio: 135 cm³, įpurškimo slėgis: 1 837 juosta, injekcijos svoris: 123 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 820 mm, bendras svoris: 5 900 kg, šildymo galia: 8,9 kW (12,10 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 470 mm, įrankio svoris: 600 000 g, Injection moulding machines direct from the manufacturer! As manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, straightforward operation, and short delivery times. This machine is suitable for a wide range of applications, including the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, year 2023) CONTROL SYSTEM  MC P1 with 15" TFT colour screen featuring multi-touch capabilities CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platens (h x v) mm 610 x 560  Minimum – Maximum mould height mm 150 – 400  Max. opening width mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forward/back kN 22 / 22  Ejector speed forward/back mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke (PS) g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticising rate (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating capacity kW 8.9  Power supply V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticising  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control hot runner shut-off 1-fold  Electrical interface for cascade control 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces for handling E18, E63  Euromap interface (central computer) E67, E77  Water manifold 4-fold  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression moulding function  Graphics analysis package  Swivelling device for injection unit The machine is located at our site in Parsdorf and is available at short notice. Additional options can be offered upon request. Gedpfxjuggb Do Al Nsud We look forward to your enquiry.

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036721, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 1 110 mm, darbinio tūrio: 1 078 cm³, įpurškimo slėgis: 1 877 juosta, injekcijos svoris: 981 g, atvērimo eiga: 3 200 mm, plokštės aukštis: 1 540 mm, pavaros tipas: Hydraulisch, laisvas tarpatramis: 3 200 mm, įrankio svoris: 2 200 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you here our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe perfectly absorbs forces and extends the lifetime of the moulds. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and highly stable in value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT colour display with multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Max. mould open force kN 455 - Tie bar spacing (h x v) mm 1110 x 960 - Platen size (h x v) mm 1540 x 1440 - Mould installation height min.-max. mm 1550 (without center platen) - Daylight mm 3200 - Max. opening stroke mm 1650 - Max. mould weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter/type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight max. stroke PS g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticising rate g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter/type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight max. stroke PS g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticising rate g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL SPECIFICATIONS - Connected load kW 341 - Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT Gusdjw U N Ixspfx Al Nsd - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mould heating 96-fold (3.5 kW) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical center platen - Parallel clamping and opening movement during injection process with platen parallelism control between FWAP and center platen or BWAP and center platen - ColorForm interface—signal interface for connecting an RPM system - Electrical interface for HRS Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our factory in Parsdorf and is available at short notice. Additional options available upon request. We look forward to your enquiry.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, Used injection moulding machine directly from the manufacturer! We at KraussMaffei, as the manufacturer, are offering one of our used injection moulding machines here. Guodpfx Asnh Rwgjl Njd CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 8,000 kN - Tie bar distance (h x v): 1,120 x 1,000 mm - Maximum mould opening distance: 1,400 mm - Min./max. mould installation height: 600/1,100 mm - Opening stroke of platen: 2,000 mm - Ejector stroke: 250 mm - Ejector force: 226 kN (retract: 59 kN) INJECTION UNIT - Screw diameter: 95 mm - L/D ratio: 23 - Injection pressure: 1,795 bar - Injection volume: 3,367 cm³ - Shot weight for PS: 3,064 g - Injection flow rate: 690 cm³/s - Nozzle contact force: 166 kN Electrical Data - Pump connection rating: 90 kW - Heating capacity: 61 kW Weight and Dimensions - Net weight: 45 t - Machine dimensions (L x W x H): 10.4 x 2.86 x 2.39 m As standard, we supply this system in fully functional basic condition. As the manufacturer, we can also offer various optional upgrades depending on the specific case, such as: - Possible control system upgrades to extend the service life of the machine - Energy optimisation upgrades - Optional connection to KraussMaffei digital products - Plasticising retrofits - Optionally: Organisation and handling of delivery (not included in the price) - Optionally: Installation and commissioning services (not included in the price) You benefit from first-class service as well as the option to purchase tailored spare parts packages for wear items, guaranteeing uninterrupted production with your new used machine. Please do not hesitate to contact us for further information or to request an offer!

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2015, Used injection moulding machine direct from the manufacturer! As the manufacturer KraussMaffei, we offer one of our pre-owned injection moulding machines for sale here. CONTROL SYSTEM - MC4 TECHNICAL DATA CLAMPING UNIT - Clamping force: 5000 kN - Distance between tie bars (h x v): 900 x 800 mm - Maximum mould opening distance: 1170 mm - Minimum mould installation height: 480 mm - Opening stroke of platen: 1650 mm - Ejector stroke: 250 mm - Ejector force: 95 kN (reverse: 48 kN) INJECTION UNIT - Screw diameter: 90 mm - L/D ratio: 20 - Injection pressure: 1742 bar - Injection volume: 1953 cm³ - Shot weight for PS: 1777 g - Injection rate: 649 cm³/s - Nozzle contact force: 115 kN Electrical parameters - Pump connected load: 90 kW - Heating capacity: 44 kW Gedpfxonh Rnuo Al Noud Weight & Dimensions - Net weight: 25.8 t - Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m As standard, we supply this machine in fully functional, basic condition. Additionally, as the original manufacturer, we can provide various options depending on individual requirements, such as: - Energy optimisation upgrades - Possible integration with KraussMaffei digital products - Plasticising unit conversions - Optional: organisation and handling of delivery (not included in the price) - Optional: setup and commissioning (not included in the price) With us, you benefit from first-class service and also have the option to purchase desired spare part packages for wear parts—ensuring seamless production with your newly acquired used machine. Don’t hesitate to get in touch with your enquiry today!

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 504212, spaudimo jėga: 5 000 kN, varžto skersmuo: 90 mm, tarpas tarp stulpų: 900 mm, įpurškimo slėgis: 1 742 juosta, įrengimo aukštis: 480 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping Unit Clamping force: 5,000 kN Distance between tie bars (h x v): 900 x 800 mm Max. mold opening distance: 1,170 mm Min. mold installation height: 480 mm Platen opening stroke: 1,650 mm Ejector stroke: 250 mm Ejector force: 95 kN Ejector force (reverse): 48 kN Injection Unit Screw diameter: 90 mm L/D ratio: 20 Injection pressure: 1,742 bar Injection volume: 1,953 cm³ Shot weight for PS: 1,777 g Injection rate: 649 cm³/s Nozzle contact force: 115 kN MACHINE DETAILS Electrical Data Guedow Dy Rwspfx Al Ned Pump connected load: 90 kW Heating capacity: 44 kW Operating voltage: 400 V Frequency: 50 Hz Total rated current (Iₙ): 306 A Motor rated current (Iₙ): 170 A Operating voltage: 3-phase Dimensions & Weight Net weight: 25.8 t Machine dimensions (L x W x H): 7.65 x 2.33 x 2.55 m Note: Delivery, installation, and commissioning can be arranged upon request for an additional fee.

Būklė: geras (naudotas), Krauss-Maffei SPA 12/25 RP Manufacturer: Krauss-Maffei Model: SPA 12/25 RP Guodehvml Dopfx Al Nod Type: Hydraulic Power Unit Complete plant closure, large selection of mezzanine floors, pallet racks, shelving racks, vertical carousels. High-quality industrial machinery, lathes, grinding machines, hand tools. You will find more items – new and used – in our shop! International shipping costs on request!

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 98 495 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 500 kN, varžto skersmuo: 25 mm, tarpas tarp stulpų: 370 mm, darbinio tūrio: 74 cm³, įpurškimo slėgis: 2 500 juosta, injekcijos svoris: 59 g, formos aukštis (min.): 200 mm, išmetimo jėga: 22 600 N, išstūmimo eiga: 100 mm, atvērimo eiga: 600 mm, bendras ilgis: 3 500 mm, bendras plotis: 1 400 mm, bendras aukštis: 1 910 mm, bendras svoris: 3 000 kg, šildymo galia: 8,12 kW (11,04 AG), siurblio galia: 11 000 W, įvesties srovės tipas: trifazis, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, Įranga: dokumentacija / vadovas, We offer this used KraussMaffei 50-180 CX injection moulding machine, year 2006. KM designation: 50-180 CX International KM size designation: 180 CX/50 Year of manufacture: 2006 Machine serial number: 61009011 Guedeyf E Dqspfx Al Ned Machine weight: 3,000 kg Condition: ready for operation (used) Pump operating hours: 98,495 Automatic cycle operating hours: 83,046 Description: Screw diameter: 25 mm Clamping force: 500 kN Injection volume: 74 cm³ Max. injection pressure: 2,500 bar Shot weight: 59 g Minimum mould height: 200 mm Max. opening stroke: 600 mm Max. distance between platens: 600 mm Tie bar spacing: 370 mm Centering ring, injection side: Ø125 mm Centerring ring, ejector side: Ø125 mm Ejector force forward/backward: 22.6 kN / 9.9 kN Ejector stroke: 100 mm Machine dimensions (LxWxH): 3,500 x 1,400 x 1,910 mm Machine weight: 3,000 kg Heating capacity: 8.12 kW Pump motor power: 11 kW Power supply: 400V, 50Hz standard industrial three-phase connection Equipment: documentation included If you have any further questions or need more information, please send us a message or call us.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 102 060 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 000 kN, varžto skersmuo: 35 mm, tarpas tarp stulpų: 420 mm, įpurškimo slėgis: 2 429 juosta, formos aukštis (min.): 300 mm, išmetimo jėga: 22 600 N, išstūmimo eiga: 150 mm, atvērimo eiga: 600 mm, bendras ilgis: 4 240 mm, bendras plotis: 1 510 mm, bendras aukštis: 2 180 mm, bendras svoris: 7 800 kg, šildymo galia: 10,97 kW (14,92 AG), siurblio galia: 18 500 W, įvesties srovės tipas: trifazis, įėjimo dažnis: 50 Hz, įėjimo įtampa: 400 V, Įranga: dokumentacija / vadovas, We offer this used KraussMaffei 100-380 CX injection moulding machine, year of manufacture 2006. Injection moulding machine: KM 100-380 CX International size designation: KM 380 CX/100 Year of manufacture: 2006 Serial number: 61009013 Machine weight: 7,800 kg Condition: ready for operation (used) Pump operating hours: 102,060 Automatic operation hours: 87,744 Description: Screw diameter: 35 mm Clamping force: 1,000 kN Injection volume: 154 cc Maximum injection pressure: 2,429 bar Shot weight: 59 cc Minimum mould height: 300 mm Maximum opening stroke: 600 mm Maximum daylight between platens: 900 mm Tie bar spacing: 420 mm Centring ring injection side: Ø125 mm Centring ring ejector side: Ø125 mm Ejector force forward/backward: 22.6/9.9 kN Ejector stroke: 150 mm Machine dimensions (LxWxH): 4,240 x 1,510 x 2,180 mm Machine weight: 7,800 kg Heating capacity: 10.97 kW Pump power: 18.5 kW Electrical connection: 400V, 50Hz standard industrial three-phase current Equipment: documentation Gjdpfjyf E Amjx Al Noud If you have any further questions or require additional information, please send us a message or call us.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 50 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 95 mm, darbinio tūrio: 3 367 cm³, įpurškimo slėgis: 1 795 juosta, atvērimo eiga: 2 100 mm, No reserve price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Clamping force: 8,000 kN Maximum mold opening force: 560 kN Moving platen opening force: 89 kN Moving platen closing force: 92 kN Clamping plate dimensions (h x v): 1,600 x 1,550 mm Clear space (h x v): 1,120 x 1,000 mm Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Maximum mold weight: 12,200 kg Opening width: 2,100 mm Ejector stroke: 300 mm Ejector force forward/reverse: 200/100 kN Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Stroke volume: 3,367 cm³ Shot weight (PS): 3,064 g Injection flow: 690 cm³/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN MACHINE DETAILS Dimensions & Weight Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 44,500 kg Pump motor rated power: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil capacity: 1,500 l Gujdeyv Acmjpfx Al Nod Operating hours: 50,000 h EQUIPMENT Oscillation elements 1 x air valve Tie-bar pulling device 3 x hydraulic core pulls on moving platen 2 x hydraulic core pulls on fixed platen 20 x hot runner control zones Robot interface according to Euromap 67

Būklė: naudotas, Gamybos metai: 2006, Liejimo mašina Krauss Maffei KM 800-4300 MX, 2006 m. Mašina komplektuojama taip: - 5 hidraulinės kaskadinės valdymo sistemos Gusdpfx Aow Hwr Dsl Ned - Įpurškimo agregatas su 90 - MT5 valdymo sistema - Krauss Maffei tvarkymo sistema - 2 konvejeriniai juostos