Berger Prallmühle pirkti naudotą (290)

Būklė: naudotas, Gamybos metai: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm The machine was overhauled according to the Kellenberger inspection protocol and newly repainted. The prone-to-failure Güttinger control system was replaced with the modern BEMA X control system. This means the machine also received a completely new electrical system as part of this upgrade. Machine equipped with a reinforced workpiece spindle head for chuck grinding of heavy workpieces. Gsdpfxovq R Uzj Agqjiu Currently, the machine does not meet the fundamental safety and protection requirements specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). Raising the required minimum safety standard must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1,500 mm Centre height: 175 mm Machine weight: approx. 3 t High-end Kellenberger 1500U Ideal for spindle manufacturers or spindle refurbishers - BEMA internal grinding attachment with separate, cooled motor Grinding spindle and internal grinding spindle motor are electrically interlocked! Internal grinding spindle can only be activated when in position. Gsdpfot Ii Rrjx Agqoiu A quantum leap in safety technology. - Infinitely variable grinding spindle speed: 1,000–1,500 rpm - Infinitely variable internal grinding spindle speed: 0–100% - Digital display of grinding spindle speeds - Swivel angle display for the upper table - Swivel angle display for grinding spindle headstock - Marposs contact sensor for external grinding only - Marposs fluid contact sensor for internal grinding - Centre height up to 250 mm possible The machine is already delivered. An identical machine can be configured with additional options. The machine tool currently does not comply with the fundamental safety and protection requirements as stipulated in the German Operational Safety Ordinance (BetrSichV) 2015. An increase of the required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Center height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180 ± ° Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Maximum workpiece weight (unsupported): 130 kg (including clamping) Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirements approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhaul/retrofit, we not only deliver machines in as-new quality with warranty, but also provide service for your machines, metrically overhauled and freshly painted. Photo shows a machine already delivered, possibly with different options. Machine is equipped standard with central lubrication and roller guides in the X-axis flatway, as well as air lift-off in the grinding headstock. BEMA Standard Equipment: - Digital readout in 2 axes. X-axis resolution: 0.5 μm - Grinding spindle speed display - Infinitely variable grinding spindle speed 70–100% - Infinitely variable internal grinding spindle speed 70–100% Gsded Ih D Espfx Agqeiu - Workpiece spindle drive powered by three-phase motor, infinitely variable via frequency converter Available options at extra cost: - Encoder with digital display in workpiece headstock - Encoder with digital display in grinding headstock (height adjustment via spindle not possible) - Sine bar - New robust internal grinding attachment, 80 mm or 100 mm diameter, with height adjustment - Increase center height to max. 225 mm - Speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid in neighboring countries only). Further accessories on request. The machine tool does not currently comply with the essential health and safety requirements as set out in BetrSichV 2015. An assessment of the necessary minimum protection level must be determined by a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Grinding diameter: 250 mm Grinding length: 1000 mm Centre height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: +/- 360° Grinding spindle headstock swiveling: +/- 0° Infeed (incremental): 0–9.99 mm/Ø Infeed (continuous): 0–9.99 mm/Ø Table swivel: +/- 10° Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (overhung): 130 kg incl. clamping Cross traverse: 270 mm Tailstock quill taper: MK3 Quill stroke: 30 mm Total power requirement: 5.5–7.5 kW Machine weight approx.: 2.7 t As a global leader in the field of Kellenberger overhauls/retrofits, we are not only able to deliver machines in as-new condition with warranty, but can also offer you service for your machines. Geometrically overhauled and newly painted according to Kellenberger measurement protocol. Completely new electrics with new infeed control. Photos show a previously delivered machine of the same design, but with 1500 mm centre distance and universal grinding head instead of the 500 mm wheel head, purely for external cylindrical grinding purposes. Equipment: - 2-axis digital readout - New DGS paper band filter Optional at extra charge: - Semi-automatic dressing - Dressing size compensation - GAP Control - Measuring automation - Safety doors Electronically controlled infeed system with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Powerful, non-swiveling grinding spindle headstock for production external cylindrical grinding operations. Gisdpfx Aed Ih Egjgqsu Areas of application: Machining of high-precision components in the gearbox, machine tool, and general mechanical engineering sectors. Pair grinding for the hydraulics industry. At present, the machine tool does not meet the basic safety and protection requirements such as those specified in BetrSichV 2015. The required minimum safety objective must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Gamybos metai: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine equipped with reinforced workpiece headstock for unsupported grinding of heavy workpieces. Gsdpfxsv Dxxzj Agqjiu The machine will undergo a major service/partial overhaul including a geometry inspection report in accordance with Kellenberger new machine standards. The machine tool currently does not meet the essential safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The necessary minimum safety objectives must be determined in the course of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel range: 360° Grinding headstock swivel range: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swivel range: ±8° Longitudinal table travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. cantilevered workpiece weight: 130 kg incl. clamping Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space required approx.: 4.2 x 2.0 m As a global leader in Kellenberger overhauls/retrofits, we not only deliver machines in as-new condition and with warranty, but can also provide service for your machines, including recently delivered machines, with additional options such as: - Splash guard doors - X-axis enclosure - Grinding headstock swivel angle display Available at extra cost. Gsdpsuxftxefx Agqsiu Geometrically overhauled and newly painted with original electrics. The machine features central lubrication and roller guides in the flat bed of the X-axis as well as pneumatic lift-off in the grinding headstock as standard. - Digital readout in 2 axes. X-axis resolution: 0.5 μm Options: - Rotary encoder with digital display in the workpiece headstock - Rotary encoder with digital display in the grinding headstock (no height adjustment with spindle possible) - New, robust internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Increased centre height up to a maximum of 225 mm - Variable speed control for the grinding spindle Includes: - Operating tools - Clamping tube for chuck Further accessories available on request. The machine tool does not currently comply with the basic safety and protection requirements as specified in the 2015 Industrial Safety Regulation (BetrSichV). The necessary minimum safety objectives must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Gamybos metai: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Gjdevdk N Ejpfx Agqoiu Control unit: Fanuc 310is Completely mechanically overhauled. Includes grinding process setup and tooling for one part. Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control: GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel configuration left: 500 x 80 mm Grinding wheel configuration right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swiveling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH at the workpiece spindle headstock for internal and external grinding Preparation for measuring control systems Movomatic ESZ 400 or Marposs P7 ME Preparation for external filtration unit Coolant cut-off for table devices Fully enclosed emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: probe C25 Hydraulic preinstallation for Arobo steady rest

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Center height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Gijdpev I Eq Sjfx Agqsu Bore: 127 mm Workpiece spindle taper: MK 5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivel: 360° Grinding headstock swivel: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Incremental feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swivel: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Max. workpiece weight (overhung): 130 kg incl. clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Floor space approx.: 4.2 x 2.0 m Available immediately, naturally with 12 months warranty! Geometrically overhauled and newly painted with new electrics, in KELLENBERGER quality! - Digital readout on 2 axes. X-axis resolution: 0.5 µm - Modern workpiece headstock with MK5 taper - Modern tailstock with MK3 taper - Modern hydraulic unit - Paper band filter Further accessories available on request. At this time, the machine tool does not comply with the fundamental health and safety requirements as stipulated in BetrSichV 2015. An increase to the required minimum safety target must be determined by means of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Gamybos metai: 1995, Šlifavimo skersmuo: 350 mm Šlifavimo ilgis: 1000 mm Gsdpsyatx Sefx Agqsiu Viršūnės aukštis: 175 mm Iš dalies renovuotas įrenginys su matavimo protokolu pagal naujos staklės tolerancijas NAUJA Eckelmann ENC valdymo sistema su BEMA šlifavimo programine įranga Skaitmeniniu būdu valdoma B ašis Vidinio šlifavimo įrenginys, skersmuo 80 mm Kairėje šlifavimo diskas, skersmuo 400 mm Dešinėje šlifavimo diskas, skersmuo 300 mm Vidinio šlifavimo velenas HJN 828 Hidraulinis grąžtas Mikroreguliavimas KEL SET matavimo sistema

Būklė: naudotas, Gamybos metai: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6 / 3.5 m Photos show identical machine with centre height 225 mm Base machine: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding head UR with T1-T2-T3 Standard equipment: - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - B-axis infinitely variable, high-resolution - Marposs measuring system for tool measurement - Active longitudinal positioning - GAP control on T1 and T2 by ELASO, contactless integration in the control interface - Semi-automatic balancing by ELASO, integrated in the control interface - Tailstock with manual retraction - Workpiece spindle head MK5 with short taper mount DIN 55026 - Internal grinding attachment, belt driven Options available at extra cost: - New high-precision workpiece spindle head with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface, 24,000 rpm with integrated GAP sensor (lead time applies) - CNC-controlled C-axis - Non-circular (polygon) grinding - Hydrostatic lead screw in X - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical overhaul: - Complete machine overhauled in accordance with Kellenberger test protocol - New easy-maintenance enclosure - New paintwork Electrical overhaul: - New, modern CNC CYLINDRICAL GRINDER CONTROL with BEMA grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z axes - New absolute rotary encoder (for B-axis) Control system: Gedpfx Ajuxfucegqeiu The grinding software consists of a basic license and various optional modules depending on the machine’s equipment. Basic software features: - External and internal oscillation grinding - External and internal plunge grinding - External and internal face oscillation grinding - External and internal face plunge grinding - External and internal cylindrical oscillation grinding - External and internal radius grinding, radius dressed on the wheel - Semi-automatic oscillation grinding - Workpiece zero setting - Wheel zero setting - Measurement of dressing diamonds - 2 form diamonds - 1 form diamond or dressing roll (dressing roll required) - Form roll (dressing roll required) - 3 flat dressing units - Corrections - Z-position measurement (probe required) - GAP contact (touching device required) OPTIONS available at extra cost: Profile plunge grinding software: - External and internal profile plunge grinding with profile wheel Profile grinding software: - External and internal profile grinding with straight wheel Thread grinding software: - Single- and multi-start external and internal thread grinding with profile dressed on the wheel - Dressing of single- and multi-rib wheels - Flank angle freely selectable Trapezoidal thread grinding software: - Additional dressing of trapezoidal threads possible External and internal non-round plunge grinding: - External and internal non-round oscillation grinding Non-round grinding software: Precondition for non-round grinding is equipping the workpiece spindle with a high-resolution rotary encoder to enable operation as a C-axis. The non-round...

Būklė: naudotas, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 175 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Infeed (per stroke): 0–9.99 mm/Ø Continuous infeed: 0–9.99 mm/Ø Table swiveling: ±8° Longitudinal table travel: 1100 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Cross travel max.: 270 mm Max. workpiece weight (unsupported): 130 kg incl. clamping Internal spindle mounting: 80 mm Tailstock quill mounting: MK3 Quill stroke: 30 mm Total power requirement: 6.5 kW Machine weight approx.: 3.05 t Space requirement approx.: 4 x 2 m Overhauled according to Kellenberger guidelines including new, modern, and future-proof control system. Photo shows a delivered machine. - Very simple operation via touch panel. - Symbol layout on control panel almost identical to original control, so no retraining necessary. - Diagnostic function with display of PLC messages and digital I/Os - Dressing function can be modified or expanded as per customer request. - Oriented spindle stop for the workpiece spindle available on request. - New maximum infeed amount of 40 mm, further expansion possible on request. - Digital readout in 2 axes. X-axis resolution: 0.5 micron Options: - Encoder with digital display in the workpiece spindle headstock - Encoder with digital display in the grinding spindle headstock (height adjustment with spindle not possible) - New, robust internal grinding attachment, 80 mm or 100 mm diameter - Increased centre height up to max. 225 mm - Grinding spindle speed control Included: - Operating tools - Clamping tube for chuck Further accessories on request. Godpfx Agjuxfupjqoiu The machine features an electronically controlled infeed system in the X-axis with stepper motor drive. Hydraulic table longitudinal and rapid traverse movement. Versatile use in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single clamping for individual parts. Possible options: - Semi-automatic dressing cycles for external and internal grinding - Automatic dressing compensation - Measuring control The machine tool currently does not comply with the basic safety and protection requirements as stated in BetrSichV 2015. A risk assessment according to BetrSichV must be carried out to determine the required minimum safety objectives.

Būklė: naudotas, Gamybos metai: 2006, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Machine weight approx. 3.5 t Machine fully overhauled in BEMA style with 12 months warranty Mechanically and visually as new Gsdpfx Agot Ii Nbeqjiu Photo shows a freshly completed machine with some different options. Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/planar grinding - B-axis automatic 1° Hirth toothing - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount 400mm diameter - Right grinding wheel mount 300mm diameter - Internal grinding attachment with belt drive - Tailstock with micrometric adjustment - Fine adjustment of upper table - Paper band filter SBP4 240l

Būklė: naudotas, Grinding diameter: 250, 350, 450 mm Grinding length: 1000 mm Centre height: 125, 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swiveling: 360° Grinding headstock swiveling: 180° ± Grinding spindle speed: 1500, 1700, 2200 rpm Plunge feed per stroke: 0.001–0.030 mm/Ø Continuous feed: 0–0.95 mm/Ø Table swiveling: ±8° Table longitudinal travel: 1300 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Max. workpiece weight (unsupported): 130 kg including clamping device Internal spindle mount: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.5 t Space requirement approx.: 4.2 x 2.0 m As a worldwide leading company in the field of Kellenberger overhaul/retrofit, we are not only able to deliver these machines in like-new condition with warranty, but also provide service for your machines. Machine geometry overhauled and newly painted, with original electrics. Photo shows a recently delivered 600U. - Digital readout in 2 axes, x-axis resolution 0.5 μm Options: - Rotary encoder with digital readout in the workpiece spindle headstock - Rotary encoder with digital readout in the grinding spindle headstock (no height adjustment possible with spindle) - New stable internal grinding attachment, diameter 80 mm or 100 mm with height adjustment - Centre height can be increased up to max. 225 mm - Variable speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Gisdet Ii Nujpfx Agqsu Further accessories available on request. At present, the machine tool does not comply with the essential safety and protection requirements as stipulated in the German Industrial Safety Ordinance (BetrSichV 2015). Compliance with the required minimum safety standard must be determined by a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Left wheel 600 mm Grinding spindle head fixed, non-rotatable. Equipped with new FAGOR control system featuring BEMA cylindrical grinding interface. Gjdpfx Aet Ii Rfogqeiu With new service-friendly enclosure. Completely overhauled according to Kellenberger measurement protocol.

Būklė: naudotas, Gamybos metai: 1995, Šlifavimo skersmuo: 350 mm Šlifavimo ilgis: 1000 mm Centų aukštis: 175 mm 2013 m. kapitaliai suremontuota Sustiprinta ruošinio špindelio galva Nuolat reguliuojama B ašis Griebtuvas Be nuotraukoje matomo pradžios ir lunetos Valdymas: Kelco 90 Giedpexyadaofx Agqju Mašiną galima apžiūrėti pas klientą prijungtą prie elektros iki 2026 m. sausio mėn. imtinai.

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, centro aukštis: 250 mm, plotis centre: 1 500 mm, šlifavimo skersmuo: 500 mm, Griebtuvėlio eigos ilgis: 30 mm, Įranga: dokumentacija / vadovas, Mašina buvo iš dalies kapitališkai suremontuota ir apima, be kita ko, naują geometriją ir naują valdymo spintą. Guolis buvo pakeistas. TECHNINIAI DUOMENYS Apdirbimo sritis Atstumas tarp centrų: 1 500 mm Giodpfx Aexgrd Sogqju Centrų aukštis: 250 mm Didžiausias šlifavimo skersmuo: 500 mm Stalo pasukimas: ± 8° Šlifavimo galvutė Šlifavimo disko matmenys: 400 x 50 x 127 mm Veleno apsukos: 1 500 / 1 700 / 2 200 aps./min Vidinis veleno gręžimo skersmuo: 90 mm Ruotinės laikiklis Ruotinės laikiklio pasukimas: 180° Veleno apsukos: 20 - 400 aps./min Vidinis kūgis: Morse 5 Griebtuvė Griebtuvės vidinis kūgis: Morse 4 Griebtuvės judesio eiga: 30 mm MAŠINOS DUOMENYS Pavaros Šlifavimo galvutės variklio galia: 3 kW Griebtuvės variklio galia: 0,9 kW Mašinos išmatavimai: 2 860 x 1 680 x 1 670 mm Svoris: 2 500 kg ĮRANGA Automatinis darbo ciklas Tepalo rezervuaras su siurbliu Vidinis šlifavimo velenas Išoriniai šlifavimo diskai Ausinimo įrenginys Dokumentacija Pastaba: Skaitmeninis indikatorių blokas gali būti įsigytas papildomai už 3 600 €.

Būklė: geras (naudotas), Sriegiklio aparatas, vamzdžių sriegiklis - Gamintojas: Rothenberger, sriegiklio modelis Supertronic 2SE be sriegiklio galvos - Vamzdžio dydis: 1/2 iki 2 colių - Veleno skylė: Ø 68 mm - Darbo įtampa: 230 voltų Gjdpfjx I Agpsx Agqsiu - Apsisukimų dažnis: 40 aps./min - Kojinis jungiklis: su avarinio stabdymo funkcija - Komplektacija: vamzdžių pjaustytuvas, vidinis užlaidų nuėmėjas - Matmenys: 500/480/H370 mm - Svoris: 46,6 kg

Būklė: geras (naudotas), Tool cabinet -includes: spare parts for toolmaking and jig construction -various drill bushes: different sizes -various clamping elements -dimensions: 670/300/H2000 mm Gedpjb A Rcwjfx Agqoiu -weight: 200 kg

Būklė: naudotas, Gear motor, electric motor, three-phase motor - Fan cover: defective - Power: 0.18 kW Gisdpfx Agecpg Hbeqju - Speed: 162.5 rpm - Hollow shaft: Ø 19 mm - Design: - Protection class: IP 54 - Quantity: 5 motors available - Price: per unit - Dimensions: 240/1147/H150 mm - Weight: 5.9 kg

Būklė: naudotas, Gear motor, electric motor, three-phase motor - Power: 0.18 kW - Speed: 162.5 rpm - Hollow shaft: Ø 19 mm - Design: - Protection class: IP 54 - Quantity: 1x motor available - Price: per unit - Dimensions: 240/1147/H150 mm Gedpfocpg Hcex Agqoiu - Weight: 5.9 kg

Būklė: naudotas, Test pump, pressure testing device, measuring instrument -includes: pressure gauge -maximum pressure: 60 bar -high-pressure hose Giodpfx Agochyxueqou -quantity: 2 units available -price: per piece -dimensions: 490/165/H260 mm -weight: 7.2 kg

Būklė: naudotas, Expander set, expander pliers, socket pliers - Suitable for pipes: 12/15/18/22/28 mm Gisdpjcnl Sdjfx Agqju - Dimensions: 490/165/H260 mm - Weight: 7.2 kg

Būklė: geras (naudotas), Linear bearing, linear rail, linear guide, roller guide rail, guide rail, crossed roller guide - Manufacturer: Schneeberger, crossed roller guide type 9700 - Hole spacing: 100 mm M8 - Quantity: 4 pieces Giodslb Iwbspfx Agqsu - Price: per piece - Dimensions: 705/22/H45 mm - Weight: 4.5 kg/piece.

Būklė: naudotas, Centrifugal pump, water pump, submersible pump -Manufacturer: Schmalenberger, centrifugal pump type SM 50-13/2 -Flow rate: 21 m³/h -Pressure: 2 bar -Motor power: 2.2 kW -Speed: 2840 rpm Godpoi Sdggjfx Agqoiu -Pipe connection: see pictures -Dimensions: 590/245/H440 mm -Weight: 56 kg

Būklė: geras (naudotas), Elektros variklis, trifazis variklis - Galia: 0,18 kW - Apsisukimų skaičius: 2800 aps./min - Velenas: Ø 14 mm - Korpuso tipas: 14 - Apsaugos klasė: IP 54 Gijdpfx Aeghh Urjgqeu - Kiekis: 1 vnt. yra - Matmenys: 245/163/H155 mm - Svoris: 5 kg