Beche 400 Kg pirkti naudotą (76 691)

Būklė: naujas, Gamybos metai: 2025, THE PRECISE 3-ROLL BENDING MACHINE Dsdong A R Sjpfx Am Doci When developing this compact, mobile horizontal bending machine, the focus was clearly on producing dimensionally accurate spirals, such as handrails for spiral staircases. This is considered the supreme discipline, as two interdependent variables (radius and pitch) must be combined into a precise geometry in a single bending operation. The interplay of tube calculations on the PC, their implementation on the bending machine, and monitoring via measuring devices with final adjustment of bending values ensure accurate, precise bending. With just a few easy inputs into the PC tube calculation program, the local printer provides a printout supporting the calculation of all necessary bending and correction data for operating the machine. A new, powerful drive concept enables stepless adjustment of the bending speed, requiring only a 230 V (single-phase) power supply. Hardened steel tools and surface-friendly hard plastic tools are available. To ensure optimal feed even for tight bending radii, all three bending shafts are driven. The drive concept proves itself in demanding daily work, whether working on flat stock, bending tubes or profiles. Customers of the Bending System 4800, 5000, and 6000 can purchase the roll bending unit without the drive. The roll bending unit, designated RB43, can be adapted to the 4800, 5000, and 6000 systems via the bending shaft. In this case, the machines function as the drive unit. POSSIBLE APPLICATIONS: • Handrails/Intermediate rails for spiral staircases • Large tube and profile bends • General metalworking TECHNICAL DATA: • Bending capacity Ø 10 to 60 mm • Minimum bending radius: 300 mm at Ø 42.4 mm • Bending direction: right and left • Digital bending adjustment for radius and pitch • Safety foot switch with emergency stop function • Maintenance-free, robust three-phase motor • Construction-site suitable 230 V connection • Weight: 280 kg OPTIONAL ACCESSORIES: • Support roller – for stabilization • Lifting roller – for controlled pitch formation • MGR – Measuring device for determining the correct radius • MGV – Measuring device for determining the correct pitch via twist • MPW – PC-based calculation program for determining correct bending values • RB4303 – Universal bending tool for profiles up to 60 mm high • Tools for special profiles OUR ON-SITE SERVICE FOR YOU: • Welcome to test production in our in-house demo room • Consultation and informational meeting at your premises • Leasing/financing purchase options • Service contracts and on-site maintenance

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, valdymo tipas: PLC valdomas, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 100 mm, Vamzdžio ilgis (maks.): 6 000 mm, Vamzdžio sienelės storis (maks.): 8 mm, Lenkimo kampas (maks.): 195 °, slėgis (maks.): 250 juosta, garantijos trukmė: 24 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, centralizuota tepimo sistema, greito keitimo įrenginys, kojinis nuotolinio valdymo pultas, THE COST-EFFICIENT MANDREL BENDING MACHINE FOR TIGHT BENDING RADII This bending system provides solutions for complex geometries with standard radii of 2xD for tube diameters from 15 - 100 mm. Depending on material quality and wall thickness ratio, radii as small as 1.5xD can also be reliably achieved in series production. With a tool height of 120 mm, ample options for special profiles are available as well. The highly precise and powerful electric drive of the bending axis, along with the robust and rigid construction of the mandrel carrier and bending arm, all contribute to the desired bending results. The plug-in bending tools allow for quick changeover to other tube sizes. The clamping pressure for the tube can be optimally adjusted. The PLC control (easily expandable via USB stick) with data storage and the latest X2X interface can store virtually unlimited numbers of programs for bending angles, length dimensions, and rotational angles for up to 50 bending sequences per tube length. A freely programmable database for up to 200 materials is available to monitor springback values. The control offers two operating modes: In 'Simple Bending', the lengths and angles of the bends are automatically displayed in relation to each other. In 'Controlled Bending', the data is preset and during the bending process a continuous actual/target comparison is performed. Also available with pneumatic rotary stop or with gear-assisted length and rotational positioning. POTENTIAL APPLICATIONS: • Plant construction, e.g. chemicals • Hydraulic piping • Metal construction • Prototype construction • Pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mm Bending capacity 9000: Ø 20 to 90 x 5 mm (depending on material) • Min/max bending radius: 40 mm / 250 mm • Min. bending radii: 1.5 x Ø (standard 2 x Ø) • Multifunctional machine control for bending angle setting (0.1°) • Mandrel carrier lengths: 3000/4500/6000 mm • Max. 180º bend angle achievable • Weight: 1,600–3,200 kg (depending on configuration) • Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: • Automatic mandrel lubrication (minimal quantity) Dcedpfx Amjnh R Suo Dei • Pneumatic or hydraulic quick-release chucks • Larger bending radius up to 300 mm • Length and angle positioning via automatic braking system or manual stops with foot switch • Semi-automatic length and angle positioning via servo motors • Automatic tool retraction • Tube calculation software • 10-inch touchscreen with integrated tube calculation • Data transfer via cable (LAN), wireless (WLAN), or USB OUR SERVICE: • Test production welcome at our in-house demo room • Consultation and information onsite at your facility • Consultation and processing for leasing/financing purchases via JUTEC • Trade-in of your current machine • Service contracts, on-site maintenance

Būklė: naujas, Gamybos metai: 2025, mašinos/transporto priemonės numeris: 1018, THE POWERFUL BENDING MACHINE FOR WORKSHOP AND ON-SITE ASSEMBLY This compact and mobile bending machine enables precise and repeatable bending up to an outside diameter of 60 mm, both stationary and directly at the installation site. A powerful three-phase motor and a precision gearbox provide robust drive power. Position detection directly on the bending axis ensures optimal bending accuracy. The bending angle is set quickly and easily via a user-friendly, menu-guided touchscreen interface, which guarantees even more intuitive operation. For more complex bending tasks, up to 100 bending programs can be stored, each with angle sequences of up to 8 bends per geometry. The multifunction control allows variable adjustment of the bending speed for forward and return motions, and a parametrizable overbend function compensates for material spring-back. Thanks to four selectable material curves, the material is automatically overbent to the required angle, ensuring a precise bending result. The “stationary pipe, rotating tool” principle ensures a minimal footprint during bending operations. For thin-walled tubes, sliding shoes are used to achieve wrinkle-free bends and to bend arcs with minimal deformation in materials such as stainless steel and copper pipes. With the PB20 profile bending attachment, flat, square, and round bars can be bent effortlessly. The KBV small-radius bending attachment enables extremely tight bending radii. POSSIBLE APPLICATION AREAS: • Plant engineering • Hydraulic piping • Serpentine/Meander bending • Prototype construction • Plumbing and heating installation TECHNICAL DATA: Bending capacity 6000SB: Ø 6 to 50 x 4 mm, single-phase 230 V Bending capacity 6000D: Ø 6 to 60 x 4 mm Bending capacity 6000DS: Ø 6 to 60 x 5 mm, three-phase 400 V Bending capacity 6000D: Ø 6 to 60 x 4 mm, three-phase 400 V Dodpfx Aeng Ax Sjm Doci • Bending radius min/max: 36 mm / 280 mm • Optional large bending radii up to 500 mm • Multifunctional machine control with bending angle adjustment (0.1° increments) • Maximum bending angle: 240° • 40 mm hex shaft for quick tool changes • Safety foot switch with emergency stop • Weight: 110 kg OPTIONAL ACCESSORIES: • Profile bender PB20 – for bending flat and square bar up to max. 100 x 10 mm, round bar up to max. 20 mm • Roll bender RB43 – the RB43 mounts to the hex shaft on the bending axis. Switching to continuous bending mode transforms the system into a drive unit. • Small-radius bending attachment KBV • Special tooling according to specifications OUR ON-SITE SERVICE FOR YOU: • Welcome to test production at our facility in the demo room • Consultation and information meeting at your premises • Consulting and financing/leasing arrangements • Trade-in of your current machine • Service contracts, maintenance at your location

Gamybos metai: 2024, būklė: naujas, oris- Extruder MINI ESE 20/25 D Technical Data Dcodpehx Elfjfx Am Dei Screw Diameter [mm]: 20 Screw Length [L/D]: 25 Screw Speed [rpm]: 20-200 rpm Screw Axial Pressure [bar]: 300 continuous load, 350 maximum Drive: Three-phase motor with frequency converter Drive Power [kW]: max. 2.5 Reduction Gearbox with integrated thrust bearing Weight [kg]: approx. 160 Dimensions [L x W x H] [mm]: approx. 1050 x 600 x 1590 *) Electrical Connection Values: 3 / N / PE Supply Voltage [V]: 400 at 50 Hz Control Voltage [V]: 230 Temperature Control: Electric mica resistance heating bands Max. Processing Temperature [°C]: 300 Control Cabinet and Control Panel The electrical installation of the extruder is located in the machine base. The base contains all necessary switching, control, and display devices. The feed zone is water-cooled; the water connection must be provided by the customer. A chiller unit for cooling the water is not included in the offer. Extruder tooling is not included in the scope of supply.

Būklė: geras (naudotas),

Būklė: naudotas, bendras ilgis: 1 220 mm, bendras plotis: 400 mm, bendras aukštis: 2 000 mm, keliamoji galia vienai sandėliavimo sekcijai: 150 kg, We offer used shelving systems here. TECHNICAL DATA Manufacturer: Nedocn Model: Shelf N Frame height: 2,000 mm (new) Shelf dimensions: 1,220 x 400 mm (used) Shelf load capacity: 150 kg Number of levels: 5 pcs Boltless assembly Cross brace Dsdpfx Asy Dggljm Deci Graduated net prices per unit plus VAT: Starter bays: 1 - 5 bays: €69.50 net per unit 6 - 20 bays: €66.03 net per unit 21 - 50 bays: €62.55 net per unit from 51 bays: €59.08 net per unit Add-on bays: 1 - 5 bays: €47.50 net per unit 6 - 20 bays: €45.13 net per unit 21 - 50 bays: €42.75 net per unit from 51 bays: €40.38 net per unit PROJECT PLANNING Our sales team will be pleased to provide you with a non-binding, tailored quotation according to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. PAYMENT TERMS Payment conditions will be agreed upon in the event of an order. Prices are stated per unit/net or as specified in the text (plus VAT). Of course, you will receive an invoice with VAT shown separately. ABOUT US Based in Nordhorn, DLK deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for trade, industry, and crafts. We constantly offer interesting used items from various manufacturers/brands at attractive conditions. If you have any questions, please do not hesitate to contact us. Four wins – The success modules of DLK – Storage Technology | Levelmaker® | Logistics | Solutions.

Būklė: beveik kaip naujas (naudotas), bendras ilgis: 1 220 mm, bendras plotis: 400 mm, bendras aukštis: 2 200 mm, keliamoji galia vienai sandėliavimo sekcijai: 150 kg, We offer here used boltless shelving units. Dcsdpfx Amsy Dgf Ij Dsi TECHNICAL DATA Manufacturer: Nedocn Model: Shelf N Frame height: 2,000 mm (new) Shelf size: 1,220 x 400 mm (used) Maximum shelf load: 150 kg Number of levels: 6 pcs Boltless assembly Cross bracing included TIERED PRICING (net per unit plus VAT) Starter bays: 1 - 5 bays: €79.20 net per unit 6 - 20 bays: €75.24 net per unit 21 - 50 bays: €71.28 net per unit from 51 bays: €67.32 net per unit Add-on bays: 1 - 5 bays: €55.00 net per unit 6 - 20 bays: €52.25 net per unit 21 - 50 bays: €49.50 net per unit from 51 bays: €46.75 net per unit PROJECT PLANNING Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with the transport and assembly of the goods. PAYMENT TERMS Payment terms will be agreed in case of order. The price is quoted per unit/net price or as specified in the description (plus VAT). Naturally, you will receive an invoice with VAT shown separately. ABOUT US DLK, located in Nordhorn, deals in new and used products for warehouse logistics, conveyor technology, mezzanine floors, textile storage as well as machinery for trade, industry and the skilled trades. We continuously offer attractive used equipment from various manufacturers/brands at competitive rates. If you have any questions, feel free to contact us. Four wins – The DLK success factors: Warehouse Technology | Levelmaker® | Logistics | Solutions

Būklė: reikia remonto (naudotas), Table size: 2900 x 1200 mm Folded size (without legs): 420 mm Opened size (without legs): 1700 mm Dodjik Hbzopfx Am Doci without hydraulic power unit! Quantity: 1 pc Price per unit

Būklė: naudotas, Gamybos metai: 1979, mašinos/transporto priemonės numeris: Res BS, Demag PK2 chain hoist crane lifting unit 250kg / 500kg Approx. 40 units available!!! 250kg / 0.25t load capacity / lifting capacity – single-fall – €500 500kg / 0.5t load capacity / lifting capacity – double-fall – €600 Dcjdpovzkylsfx Am Dei With 2 lifting speeds, lifting height approx. 3–4m Complete with control pendant and load hook Total weight approx. 40kg, connection to 380V 50Hz Top condition, fully functional. Not a worn-out or used-up device! Just connect and start using. Taken from ongoing operation. Item location: 75053 Gondelsheim See pictures

Būklė: naujas, Gamybos metai: 2025, Blasting Container High Cube Basic with Sweeping Floor Shovel Hopper for approx. 4 pressure vessel fills + blast kettle fill, allowing for long blasting sessions without refilling. Type SC.20FHC.5800 Basic Standard features – ready to operate: (Just add blasting media, connect power and compressed air) 1x Control cabinet with emergency stop, Siemens Logo 1x Pressure blasting vessel 1x Pressure regulator and water separator 1x Blast hose DN 25 with 8mm blast nozzle 1x Remote control with dead man’s switch 1x Feed chute/bunker for blasting media 1x Blasting media sieve + collection container for coarse particles 1x Vertical separator for blast dust extraction (reduces dust during blasting) 1x Filtration unit with pre-chamber separator 1x Extraction wall as louvre-type impact separator 1x Rubber wall cladding 4mm with tissue reinforcement 1x Tear plate floor 3/5 1x LED lighting 1x Emergency lighting, door end switch, emergency stop 1x Breathing air filter 1x Blasting helmet 1x Blasting gloves 1x Suit Options: - Side Door Open, container can be fully opened on the side for easy loading via forklift - Container widening - Container extension Djdew Ivk Tepfx Am Dsci - Crane roof hatch - Crane track 500kg - C-profile rail for powder coaters - Blast trolley - Filter with Big Bag - HEPA post-filter for contaminated dusts, e.g. when blasting stainless steel - Stainless steel tear plate floor for stainless blasting - Aluminium tear plate floor and much more on request!

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, slėgis: 6 juosta, garantijos trukmė: 60 mėnesiai, vidinis plotis: 5 000 mm, vidinis ilgis: 15 000 mm, vidinis aukštis: 5 000 mm, filtravimo plotas: 352 m², tūrio srautas: 22 m³/val, Įranga: apšvietimas, dokumentacija / vadovas, Blast room *up to 5 years warranty* for all abrasives, constructed from steel frame/isopanels with filtration system, recirculation system, abrasive preparation, 200l pressure blasting pot with automatic refilling, blast hose with dead man control, breathing air system, LED lighting, wall lining made of 70shore 4mm fabric-reinforced rubber, sweep pit with bucket elevator. Abrasive return via sweep pit with bucket elevator, upgradeable to crosswise screw conveyor with dosing hood across full width as sweep pit or complete flat belt floor. Workpiece transport can be retrofitted: blast trolley with track bed, crane system, crane roof opening, etc. For glass bead blasting of stainless steel, upgradeable with proper magnetic drawer or electrically driven magnetic drum separator. For blasting with two different abrasives (ferritic and mineral), upgradeable with magnetic drum separator, final demagnetizing stage and a second air separator for abrasive separation and cleaning. Djdeu Hy Tpepfx Am Dsci Safety features: battery emergency lighting, emergency stop buttons inside and outside the cabin, viewing window to the blast chamber, door/gate limit switches, dead man control, rapid vent pressure vessel. Up to 5 years warranty on various components. 50 years of experience and more than 3,000 systems in blast equipment engineering.

Būklė: naujas, Gamybos metai: 2026, 5 t akumuliatorinis smėliavimo vagonas smėliavimo įrenginiui - 5 t apkrova - Skirtas bėgių sistemai - Varomas akumuliatoriumi - Nuotolinis valdymas - Matmenys: Ilgis = 3000 mm, Plotis = 1000 mm Dcodpeyyxidjfx Am Dji - Paviršiai ruošinių laikiklių tvirtinimui

Būklė: naujas, Gamybos metai: 2026, 10 t smėliavimo vežimėlis smėliavimo įrenginiui su pneumatiniu pavara. - Pneumatinė pavara 10 t apkrovai - Apkrova 10 t - Matmenys: Ilgis=2000mm Plotis=2000mm Aukštis=500mm - Skirta bėgių sistemai - Su paviršiais ruošinių laikikliams Dodpfeyyxfrox Am Dsci - Pasukamas stalas kaip parinktis

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Rankinis smėliavimo vežimėlis smėliavimo įrenginiui, apkrova 5 t - Ilgis: 3000 mm, plotis: 1500 mm, aukštis: 500 mm - Apkrova: 5 t - Smėliavimo vežimėlis su bėgių ratukais važiuoti bėgiais smėliavimo salėje - Profiliai pastatyti vertikaliai, kad abrazyvas galėtų nubėgti - Vilkimo kilpos krautuvui Dedpfxoyyxa Ne Am Doci - Pasukamas stalas – pasirinktinai

Gamybos metai: 2020, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Siūlome šiuos naudotus KD vamzdžius, kurių skersmuo 315 mm, KG 2000 KG nuotekų vamzdžius, žalius, pagamintus 2020 m. Apie 70 m, vamzdžio ilgis 5 m, įvairūs alkūnės, Y formos jungtys ir pan. Temperatūros intervalas: -20 iki 90 °C Sandarinimo medžiaga: Guminiai žiedai pagal DIN EN 681 Spalva: šviesiai žalia RAL 6017 Medžiaga: polipropilenas (PP) Žiedinė standumas SN: 10 kN/m² Sandarumas (garantuojamas iki): 7,0 bar Cheminis atsparumas (pH): 2–12 pH Šilumos laidumas: 0,04 W/(K·m) Ilgio plėtimosi koeficientas: 0,08 mm/(m·K) Trumpalaikis E-modulis: 2500 N/mm² Ilgalaikis E-modulis: 450 N/mm² Dcodjyyml Tspfx Am Doi Kilus klausimams ar norint gauti daugiau informacijos, prašome rašyti žinutę arba paskambinti.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, For sale is a copy milling machine from Franz Kuhlmann KG, model series GM ½. The machine is fully functional and ready for immediate use. Technical data: X-axis (longitudinal travel): 330 mm Y-axis (cross travel): 200 mm Z-axis (vertical travel): 280 mm Template table: 500 x 400 mm Spindle speeds: 4,200 – 20,000 rpm Spindle holder: collet chuck up to 8 mm possible Motor power: 0.5 kW Dimensions: approx. 1145 x 1020 x 1620 mm (L x W x H) Weight: 430 kg Transport and loading can be arranged throughout Europe for an additional charge upon request. Prices are subject to VAT. Inspection by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange possible! Machine purchase / sale BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Are you looking for a quality yet affordable metalworking machine for your production? Or are you looking to sell your machine? For further information or contact options, please visit our website. Dcedpfxjwal Dhe Am Doi

Gamybos metai: 2026, būklė: beveik kaip naujas (parodų įrenginys), The BTS Tire Packing Machine Gen.2 is ideal for used tire businesses with high tire volumes. The triple tire packing machine is the perfect solution for cost-effective disposal or further marketing of second-hand tires. By doubling or tripling the tires, a significant volume reduction is achieved, allowing available storage and loading space, as well as the permissible transport weight, to be used much more efficiently. Press Cylinder: Pneumatic Pressing Force: 1.23 kN, adjustable Machine Dimensions: 1250 H x 1930 W x 660 D mm Machine Weight: 93 kg Transport Dimensions: 1250 H x 1200 W x 800 D mm Working Height: 800 - 1020 mm, adjustable Connection: Compressed air, up to 10 bar / 145 psi Operating Pressure: 6 - 8 bar User-friendly, safe two-hand operation Robust and durable construction High-performance pneumatic cylinder Dcodpfx Asb Rz R Uem Doi Ball bearing guide rollers Adjustable working height Extremely quiet due to muffler Quick-release compressed air coupling A quality product "Made in Germany" Suitable for bundling Used tires Optional features Machine color according to RAL BTS-MF550HD used tire baler The demo video shows the BTS Tire Packing Machine Gen.1; the BTS Tire Packing Machine Gen.2 operates in the same way. Tire packing machine, tire tripling machine, tire doubling machine, tire packer, tire doubler, tire tripler, tire handling, tire-packing, tire tripling machine

Būklė: naudotas, Kraninis magnetas, kėlimo magnetas BAKKER MAGNETICS Tipas: BM 400 Pagaminimo metai: 1998 Keliamoji galia: 400 kg Magnetinio paviršiaus dydis: 190 x 155 mm Savas svoris: 36 kg Dcsdpfexciwhex Am Dsi Su rankiniu perjungimo svertu Kraninis žiedas pakabinimui Keliamoji galia 400 kg, kai atstumas iki medžiagos yra 0,0 mm ir mažiausias medžiagos storis 30 mm.

Būklė: geras (naudotas), Gamybos metai: 2011, veikimo valandos: 40 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 88 t, pildymo angos plotis: 990 mm, pildymo angos ilgis: 1 800 mm, kamuolio ilgis: 1 200 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 750 mm, bendras svoris: 23 000 kg, alyvos bako talpa: 2 000 l, galia: 90 kW (122,37 AG), tūrio srautas: 643 m³/val, Good day, We hereby offer you, without obligation, a used baler including conveyor belt, wire tying stations, and bale chute, manufactured by HSM GmbH + Co. KG, model VK 8818 FU. The following technical data has been taken from the manufacturer’s operating manual and brochures, for the accuracy and completeness of which we provide no guarantee. Manufacturer: HSM GmbH + Co. KG, Germany Model: VK 8818 FU Year of manufacture: 2011 Operating hours: approx. 40,000 hours, as of July 2025 Main press force: 880 kN Specific press force: 107 N/cm² Chamber feed opening: 990 x 1,800 mm Dedpfsymmtcjx Am Deci Theoretical throughput: 643 m³/hour Bale size: 1,100 x 750 mm, length variable from 600 to 2,000 mm Drive power: 2 x 45 kW, frequency-controlled Tying: 5-fold horizontal, fully automatic Press dimensions (assembled): 12,130 x 4,800 x 3,270 mm (L x W x H) Installation dimensions – press with conveying technology: 14,000 x 23,000 x 7,745 mm (L x W x H) Note: The machine was used at a recycling facility for compaction of paper, cardboard, and film. The press is in good condition and will be replaced by a new, larger baler in May/June 2026. Until then, the machine can be inspected under working conditions with material throughput. We would be pleased if this baler is of interest to you. Your service team at Mertens & Frowein GmbH

Gamybos metai: 2015, būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: A-150016, AUTOMATED ADHESIVE APPLICATION MACHINE, GANTRY SYSTEMS, AND AUTOMATED INSERT UNIT FOR METAL SHEET INLAYS This system is part of a larger production line; please refer to our other listings for additional equipment. The offered system includes 3 loading stations for surface layers, an automated adhesive application machine for sandwich bonding, a layup conveyor for manual assembly of inlays/cores, gantry systems for handling the surface layers, and an automated insert unit for metal sheet inlays/reinforcement points. COMPONENT DIMENSIONS (from previous production): L/W min: 2000mm x 1500mm L/W max: 8000mm x 2500mm H min: 12mm H max: 60mm MATERIALS (from previous production): Dodpfxsyt Nm Se Am Djci GRP, sheet metal, plywood, wood/PU strips, PVC, styrofoam ADHESIVE APPLICATION GANTRY FOR AREA & CONTOUR BONDING (of surface layers & inlays): Number of needle valves for area: 104 Number of needle valves for contour: 1 Adhesive system: 1K-PUR Number of nozzles (water spray unit): 8 ANCILLARY EQUIPMENT: Climate control cabin (storage for 1K-PUR adhesive) Vacuum pump for gantry systems Punching unit

Gamybos metai: 2018, būklė: geras (naudotas), Vehicle description Mini excavator TAKEUCHI TB 225 Dcedpsndk Iwjfx Am Dji Year: 2018 According to hour meter: 2,547 hours 2,400 kg 16.5 kW - Hydraulic quick coupler - 2 digging buckets + new hydraulic grading bucket! - Hydraulic adjustable undercarriage - Cab with heating - Work lights - Attractive and well-maintained excavator - Original paint - Good tracks Sale price: €29,950 net Affordable delivery possible!

Būklė: naujas, tuščias svoris: 440 kg, didžiausias leistinas svoris: 1 560 kg, bendras svoris: 2 000 kg, krovimo vietos ilgis: 4 000 mm, krovinių skyriaus plotis: 1 850 mm, padangos dydis: 195/50r13c,

Būklė: geras (naudotas), rida: 839 472 km, galia: 294 kW (399,73 AG), pirmoji registracija: 03/2007, kuro tipas: dyzelinas, kuras: dyzelinas, kuro bako talpa: 700 l, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, emisijos klasė: Euro 4, bendras ilgis: 10 250 mm, bendras plotis: 2 550 mm, bendras aukštis: 3 950 mm, krovimo vietos ilgis: 7 670 mm, krovinių skyriaus plotis: 2 420 mm, krovos erdvės aukštis: 2 720 mm, Gamybos metai: 2007, Įranga: ABS, EBS (Elektroninė stabdžių sistema), autonominis šildytuvas, borto kompiuteris, diferencialo užraktas, elektrinis langų reguliavimas, galinis keltuvas, kruizo kontrolė, oro kondicionavimas, priekabos jungtis, trauki kontrolė, vairo stiprintuvas,

Gamybos metai: 2019, būklė: paruoštas naudoti (naudotas), Galimas KG Bremen maišytuvo indas ir du maišytuvai PRG bei IKA. 1) KG Bremen maišytuvo indas, pagaminimo metai: 2019, maks. darbinis slėgis: atmosferinis, maks. darbinė temperatūra: 80°C, talpa: 1150 l, maks. dvigubo apvalkalo darbinis viršslėgis: 5 bar, maks. dvigubo apvalkalo darbinė temperatūra: 80°C, medžiaga: 1.4301. 2) Precizinis maišytuvas PRG R112M-6, pagaminimo metai: 2004, maišytuvo ilgis: 930 mm, maišymo organo skersmuo: 160 mm. 3) Precizinis maišytuvas IKA RF 04-T-1085, pagaminimo metai: 1999, bendras ilgis: 1100 mm, maišymo organo skersmuo 1/2: 160 mm/200 mm. Galima apžiūra vietoje. Dedpfexhntrex Am Deci

Būklė: naujas,