Axon Vmc1570 pirkti naudotą (4 683)

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, Completely overhauled OPS Ingersoll Gantry 800 Eagle sinker EDM – technically and visually in top condition The machine has been thoroughly and professionally overhauled in our facility and is in excellent technical and visual condition. During the overhaul, more than 70% of the machine was dismantled. All relevant wear parts were carefully inspected and replaced as needed, including, among others, ball rollers and drive spindles. This was followed by complete geometric measurement, alignment, and additional inspection using a laser measuring system. The machine bed and entire base were thoroughly cleaned. All pumps were disassembled, cleaned, and overhauled. All hoses, including hydraulic and pneumatic hoses, were completely replaced. The machine also received a brand-new paint job and presents itself in a very well-maintained visual state. The generator and control system were cleaned and technically inspected. The generator's cooling unit was also cleaned to ensure reliable cooling and stable operation. Finally, the machine underwent comprehensive EDM testing according to OPS Ingersoll's quality and test standards. Dujdeziz Sqjpfx Ahrjw The machine is immediately available and ideally suited for reliable production use. Technical Data: - Ingersoll (OPS Ingersoll) - Sinker EDM machine - OPS INGERSOLL GANTRY EAGLE 800 - Year of manufacture: 2008 - Control system: EAGLE Powertec PC/NC 2060 - MultiProg Powertec technology programming on PC/NC - Powertec Easy Burn rapid programming - Powertec Handheld – multifunctional hand control device - Manual EDM with Powertec Handheld - High Speed Jump max. 18 m/min - Generator output: 60 Ampere, EAGLE Powertec - Travel range (X, Y, Z): 550 x 850 x 450 mm - Electrode changer: 20-position pick-up rotary changer - Work tank (W x D x H): 800 x 1100 x 480 mm - Work table (W x D): 760 x 1000 mm - Load capacity: 2,000 kg Accessories: - CO2 fire suppression system - Integrated cartridge filter system Special Equipment: - Linear measuring system on all axes (standard on Z-axis in this series)

Būklė: naudotas, Gamybos metai: 1980, Workpiece diameter 600 mm Workpiece weight 400 kg Workpiece height 300 mm Total power requirement 35 kW Machine weight approx. 4,500 kg E L B Horizontal Rotary Table Surface Grinding Machine Model SWR 60 T NC-K Year of manufacture 1980 Serial No. 169371080 _____ Grinding range: 600 mm Table diameter / Magnetic chuck diameter: 600 mm Table speed, steplessly variable: 20 - 80 rpm Swing diameter approx.: 800 mm Maximum grinding height above magnet: approx. 300 mm Vertical travel of grinding head: 220 mm Cross travel of grinding slide: 320 mm Maximum table load: 400 kg Automatic vertical feed: 0.01 - 0.2 mm/stroke Grinding spindle speeds, steplessly variable: 1,000 - 2,400 rpm Grinding wheel diameter max.: 400 x 120 x 76 mm Grinding spindle drive, max.: approx. 28 kW Total connected load: 35 kW - 380 V - 50 Hz Weight: 4,500 kg Accessories / Special Equipment - Control panel mounted on the machine with adjustable stepless grinding spindle speed (potentiometer) with analog display of cutting speed in m/sec and ammeter - Stepless table speed, stepless cross feed speed of the grinding slide, and stepless vertical infeed of the grinding wheel with roughing/finishing/spark-out, each adjustable via potentiometer, as well as with a dressing cycle timer for switching rapid vertical traverse to the grinding slide intermittently - Hand control panel with push buttons for manual control of the machine, e.g. dresser forward/back, cross slide forward/back or crawl feed, vertical slide up/down or crawl feed - 2 preset counters for setting preliminary and finish sizes with automatic shut-off - Selector switch +1µ/-1µ, digital display of Y-axis - Automatic straight dresser, motorized, mounted above the grinding wheel with pre-settable dressing speed and pre-settable dressing stroke - Fitted normal-pole magnet approx. 600 mm Ø - Separate free-standing electrical cabinet and separate small coolant pump Condition: Satisfactory to good – ready for demonstration under power / Ideal for tool room jobs, etc. Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Here is the link to the video: Duedpfst Abrwex Ahrew Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and error in technical data: E L B (Germany) Horizontal Rotary Table Surface Grinding Machine Model SWR 60 T NC-K Year 1980 Ser.-Nr. 169371080 _____ Grinding range, max.: 600 mm Table Ø / magnetic chuck Ø: 600 mm Workpiece swing diameter approx.: 800 mm Table speeds, infinitely variable: 20 – 80 rpm Max. grinding height above table approx. ...

Gamybos metai: 1987, būklė: naudotas, x-travel: 2,800 mm y-travel: 800 mm z-travel: 1,300 mm Machine weight approx. 3 t STIEFELMAYER Manually Operated 3D Measuring and Marking Machine Type: System C-100 Year of manufacture: 1987, Measuring Stand No.: 314 710 87 Working Area: X-axis (horizontal): approx. 2,800 mm Y-axis (cross): approx. 800 mm Z-axis (vertical): approx. 1,300 mm Worktable size: 3,500 x 1,000 x 360 mm Working height above floor: 750 mm Installed rotary table, swiveling: 800 mm Measuring carriage cross sections: 100 x 100 mm or 60 x 60 mm Height of worktable above ground: 700 mm Worktable thickness approx.: 360 mm Total height of assembled measuring machine: approx. 2,800 mm Weight: approx. 3,000 kg Special Features / Accessories: • Side-mounted measuring carriage system C with cross-section 100 x 100 mm or 60 x 60 mm for Y-measuring arm • Mounted rotary table with vernier display 0 – 360°, can be easily removed • Mounted measuring counter Type MZ 2000 as digital display with network connection and RS232 interface • 2 longitudinal rulers as workpiece stops, approx. 2,400 mm long • 6 height-adjustable leveling feet • Swiveling tray, extensive marking accessories • RENISHAW measuring probe Condition: good – available from stock, under power Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice We kindly await your order. Dedpfx Ahet Hw I Nsrjuw We also have other measuring machines and surface plates in various sizes in stock. Please enquire with us.

Būklė: naudotas, Gamybos metai: 1981, x-travel: 650 mm y-travel: 450 mm Workpiece height: 585 mm Control: ADCOS CNC 400 Total power requirement: 15 kW Machine weight approx.: 5000 kg Space requirement approx.: m H A U S E R (Switzerland) CNC-controlled double-column coordinate grinding machine Model: S 40 – CNC 311 / ADCOS 400 CNC Year of manufacture: 1981 / modernised in 2008 #0125 Table size approx.: 630 x 770 mm Table load capacity approx.: 500 kg Table longitudinal travel max. (X): 650 mm Grinding head cross travel max. (Y): 450 mm Vertical adjustment of cross beam max. (W): 500 mm Grinding spindle stroke max. (Z): 140 mm Grinding head stroke rate (4Hz): 0.5–12 m/min Vertical clearance between table/spindle: 0–585 mm Clearance between columns: 750 mm Taper grinding max.: 16° Grinding diameter (bore): approx. 230/360 mm 18 spindle speeds, infinitely variable depending on spindle motor: 4,500–80,000 rpm Fine feed rates in X and Y axes and W axis: 0.5–1,500 / 3,000 / 800 mm/min Planetary rotation speed (C-axis): 5–250 rpm Total drive approx.: 15 kW – 400 V – 50 Hz Machine weight approx.: 5,000 kg Accessories / special equipment: • CNC path control replaced in 2007 with an ADCOS CNC control, model CNC 400, with large screen and direct programming at the control panel, with electronic handwheel for fine adjustment of axes: X = table longitudinal, Y = grinding head cross, Z = quill vertically/stroke, C = rotary axis spindle/quill, U = automatic feed, W = cross beam vertical adjustment • Z-axis as rapid traverse for shorter machining times, plunge grinding, face grinding, preselection of reversals (approach + teach-in), and continuously variable stroke speed, acting as a 3rd positioning axis • U-axis as manual and controlled feed axis (radial), at the grinding head, with electronic display of infeed amount • 1 grinding motor built in with spindle speed approx. 30,000 rpm • Integrated acoustic grinding contact indicator KSV 5 • Separate coolant system with belt filter, electrical control cabinet and switch cabinet free-standing, separate hydraulics, central lubrication, dust extraction, and much more Condition: very good, demonstration-ready under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Duedpet Hw S Usfx Ahrjw

Būklė: naudotas, Gamybos metai: 1987, x-axis travel: 400 mm y-axis travel: 250 mm Workpiece height: 485 mm Control: ELESTA CNC 314 Total power requirement: 10 kW Machine weight approx.: 4,000 kg Space requirement approx.: [please specify dimensions] m H A U S E R (Switzerland) CNC controlled coordinate grinding machine Model: S 3 – CNC 314 Year of manufacture: 1987 / partially overhauled in 1998 # S 3 - 0463 _____ Table size approx.: 600 x 380 mm Table load capacity approx.: 300 kg Maximum longitudinal table travel (X): 400 mm Maximum cross table travel (Y): 250 mm Maximum vertical adjustment of grinding slide (W): 450 mm Maximum grinding spindle stroke (Z): 120 mm Grinding head stroke, hydraulic: 15 - 7,500 mm/min Installation height table/grinding spindle min./max.: -75 / +485 mm Grinding spindle overhang: 350 mm Maximum angular grinding: 16° Maximum bore grinding diameter approx.: 230 mm 18 spindle speeds, depending on spindle motor Continuously variable: 4,500–80,000 rpm Planetary rotation speed (C), continuously variable: 5–250 rpm U-axis, radial feed: 6 mm Total drive approx.: 10 kW - 380 V – 50 Hz Machine weight approx.: 4,000 kg Accessories / Special Features: • CNC path control type CNC 314 (ELESTA – POSELESTA II) with monitor for 4 axes (=XYC+U-axis), interpolation in 2.5 dimensions (XYC). The U-axis is a feed axis and is not interpolatable. Teach-in programming directly on the machine, with various subprograms, as well as manual movement of the axes at the control panel or with electronic hand unit. Separate digital readout for Z-axis • U-axis as manual and controlled radial feed axis at the grinding head, with digital readout of feed size • 2 grinding motors #5674 and 3980 up to a spindle speed of 80,000 rpm • Built-in acoustic grinding contact monitoring device KSV 5 • HI-Cut device (oil cooling) and automatic fire protection system Djdpfx Ahot Hw Txorouw • Free-standing coolant system with belt filter, separate hydraulic unit and control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories currently available. Condition: good to very good / shortly ready for demonstration under power Delivery: ex stock, as inspected Payment: strictly net - upon receipt of invoice

Būklė: naudotas, Gamybos metai: 2001, x-travel 630 mm y-travel 500 mm z-travel 500 mm Control CNC Total power requirement 13 kW Machine weight approx. 4.5 t Space requirement approx. ... m O F F E R We can offer you, ex stock, subject to prior sale and errors, without obligation: DECKEL MAHO CNC Vertical Machining Center Model DMC 63 V Year of manufacture 2001 Serial No. 288500177xx _____ Working area: Longitudinal travel X-axis 630 mm Cross travel Y-axis 500 mm Vertical travel Z-axis 500 mm Table clamping area 800 x 500 mm Table load capacity approx. 500 kg Distance table – spindle min / max. 150 / 650 mm Tool holder SK 40 Infinitely variable spindle speeds 8,000 rpm Feed, X / Y / Z axis 0 - 30,000 mm/min Spindle drive power 9/13 kW Total power supply approx. 17 kW - 400 V - 50 Hz Weight approx. 4,500 kg Accessories / Special features: • SIEMENS 810 D CNC control, 3 axes, with ShopMill operating and programming software, all standard options, cycles and subprograms, graphic display for easy workshop programming • mobile electronic handwheel • 24-position tool drum magazine max. tool Ø 80/140 mm x max. length 300 mm • ICS = internal coolant supply through the spindle, 15 bar pressure with suitable filter unit on the coolant system • complete full enclosure with sliding doors, VISIPORT clear-view rotating window, oil mist extraction unit, complete coolant filtration system with chip conveyor Only 3,216 operating hours, the machine was used only in a training center! Condition: very good, used in a training workshop Dujdpfxet Ii Iwe Ahrsw Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net - after receipt of invoice Constantly in stock: a selection of CNC machining centers of all types – please also ask about alternatives! (Please click here for a video of the machine: geiger-germany.com/images/videos/DMG-DMC63V/DMC63V-1.mp4)

Gamybos metai: 1991, būklė: naudotas, Wheel diameter - max. 400 mm Number of teeth - max. 150 Module - max. 5 Total power requirement: 16 kW Machine weight approx. 10 t P R Ä W E M A CNC Gear Edge Milling Machine in continuous hobbing process for chamfering external and internal gears on sliding sleeves, synchronizer rings, clutch bodies, starter pinions, spur gears, etc. Type SynchroForm W 2 - 1 Year of manufacture: 1991 Machine No. 05610 Workpiece diameter min./max.: 30 - 400 mm Number of teeth: 6 - 150 Module max.: 5 Tool holder/shank-Ø: SK 30 / 20 mm Tool speed/spindle performance max. continuous: 4,000 rpm or 1.8 kW Transverse and longitudinal feed rates: 0.001-12 m/min Workpiece speed max. (1.5 kW) - C axis: 2,000 rpm Total drive approx.: 16 kW - 380 V - 50 Hz Weight approx.: 10,000 kg Equipment / Special features - BWO (HECKLER & KOCH) CNC control type 785 H for a total of 7 axes with screen input and all necessary monitoring and fault diagnosis systems for fully automatic operation. - 2 milling spindle units, left and right, adjustable to all required angular positions, CNC-controlled: Z and W axes = tool cross slide / X and U axes = tool longitudinal slide, L and O axes = milling spindle, C axis = workpiece spindle rotation. Manually controlled: tool slide rotary table (B and E axis), tool slide vertical adjustment (V and Y axis), tool head tilt (A and D axis), each with ROD for digital display in the control. - Hydraulic workpiece clamping device in combination with an automatic loading system via workpiece feed/conveyor belt and swing loader, as well as air system monitoring for the workpiece. - Coolant system with chip conveyor, soundproof enclosure, central lubrication, integrated hydraulic unit, pneumatically actuated safety doors, deburring equipment, etc. Dsdpfx Ajt Hwylehrjuw The machine operates on the hobbing principle with electronically synchronized tool and workpiece axes for machining straight roof profiles, both symmetrical and asymmetrical. Characterized by high productivity and precision. Condition: good to very good – shortly ready for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Further machines for the processing of transmission components are always available from stock. Please enquire about your requirements.

Gamybos metai: 1985, būklė: naudotas, Spindle diameter: 110 mm X-axis travel: 900 mm Y-axis travel: 600 mm Z-axis travel: 200 mm Table length: 1,020 mm Table width: 860 mm Taper: MK 40 Table size approx.: 1,020 x 860 mm Table load capacity approx.: 800 kg Max. longitudinal table travel (X): 900 mm Max. cross travel of drilling head (Y): 600 mm Max. quill travel (Z): 200 mm Max. vertical adjustment of cross beam (W): 635 mm Vertical clearance table/drilling spindle max.: 15 – 850 mm Distance between uprights: 950 mm Spindle diameter: 110 mm Duedpst Hwyxefx Ahrew Internal/external spindle taper: ISO 40 18 spindle speeds: 10 – 2,500 rpm Continuously variable milling feed (table): 1 – 6,000 mm/min 4 milling feeds (drilling head): 30 – 180 mm/min 6 drilling feeds: 0.01 – 0.39 mm/rev Positional accuracy for all 3 axes (as new): 0.003 mm Rapid traverse table/drilling head/cross beam: 6,000 mm/min Spindle drive power: 6.2 kW Total drive power approx.: 15 kW – 380 V – 50 Hz Machine weight approx.: 9,000 kg Accessories / Special equipment: - 3-axis CNC control BOSCH MICRO 8 with monitor, program input manually, via cassette, and through interface - Digital display for Z-axis - Separate control cabinet, various tools - Oil cooler for spindle lubrication, etc.

Būklė: naudotas, Gamybos metai: 1990, X-axis travel: 500 mm Y-axis travel: 300 mm Z-axis travel: 350 mm Total power requirement: 12 kW Machine weight approx.: 3,800 kg Space requirements approx.: [please specify dimensions] Vertical 3-axis CNC machining center Model: MC 320, Year of manufacture: 1990, # KMH 320 1379 TECHNICAL DATA: Working area: - Longitudinal travel X-axis: 500 mm - Vertical travel Z-axis: 350 mm - Cross travel Y-axis: 300 mm Rotary table / Working surface: 510 x 300 mm Table load capacity (each): approx. 100 kg Mounting height between table/spindle: 150-540 mm Overhang to spindle center: 350 mm Tool mounting: SK 30 Spindle speeds: 45 - 6,000 rpm Feed rates / rapid traverse max.: Up to 5 m / 20 m/min Drilling / Milling capacity in steel: 25 mm / 130 cm³ Milling in aluminium: 500 cm³ Main AC drive approx.: 5.5 kW Total drive: approx. 12 kW - 380 V - 50 Hz Weight approx.: 3,800 kg Accessories / Special features: Dujdpfxet Hwy Eo Ahrsw Original FANUC control, type O-M, with screen and graphics, featuring all modern subprograms, fault diagnostics, electronic handwheel, RS 232, easy and fast programming directly at the machine, and more. Vertical turret head with 12 tool stations, ISO 40, quick tool change time approx. 6 seconds chip-to-chip. Pendulum machining on 180° rotary table with 2 tables approx. 550 x 380 mm; loading and unloading of workpieces takes place outside the machining area. Separate coolant system, chip conveyor. Full enclosure with good accessibility from all sides. A hydraulic vise is mounted, various tool holders included. Ideal machine for productive drilling, tapping, and milling in steel and aluminium.

Būklė: naudotas, Gamybos metai: 1991, Workpiece diameter: 30 mm Thread length: 110 mm Thread pitch: 0.5–2.75 mm/rev Total power requirement: 4.5 kW Machine weight: approx. 1.7 t Space requirement: approx. [dimension missing] m MONNIER & ZAHNER Switzerland Thread Whirling Machine with Automatic Workpiece Loading System Type MZ 600, Year of Manufacture approx. 1991, #3591 _____ Max. workpiece Ø: approx. 30 mm Max. workpiece length: approx. 110 mm Axial milling length: approx. 100 mm Module in steel: approx. 1 Worm leads: 1 Axis distance tool-workpiece min./max.: 0–70 mm Whirling head swiveling: ±12° Tool size approx.: 70 x 16 mm Whirling head speeds approx.: 1,000–6,000 rpm Pitch range approx.: 0.5–2.75 mm/rev Whirling head drive: approx. 1.5 kW Dujdpfx Ajt Hwzcohrjw Total drive: approx. 4.5 kW – 220 V/380 V / 50Hz Weight: approx. 1,700 kg Accessories / Special equipment: The machine is used for the production of medical screws and is equipped with an automatic workpiece feeder via a Rübenach vibrating bowl with pneumatic swivel gripper for introducing blanks, as well as a counterpoint (pusher) and with ejector in the workpiece spindle head. Pneumatic workpiece clamping device in the workpiece spindle head. The finished parts are ejected and fall into a collection container. The tool slide is designed as both a longitudinal and cross slide; the longitudinal slide determines the thread length and pitch via the leadscrew, the cross slide determines the thread depth. Copying device at the end of the cross slide with template holder for conical screws. Pitch gearbox in the workpiece spindle stock via change gears. Simple electronic program control with display for motion sequence monitoring. Fault indication, piece counter, oil mist extraction, coolant system, etc.

Būklė: naudotas, Gamybos metai: 1999, Swing diameter 150 mm Turning length 500 mm Total power requirement 4 kW Machine weight approx. 0.8 t O F F E R We can offer you, without obligation and subject to prior sale and errors, ex stock: W E I L E R LZS - Universal Lathe with Digital Readout Type PRIMUS VC Year of manufacture 1999 _____ Centre height 140 mm Max. turning diameter over cross slide 150 mm Max. swing diameter over bed 280 mm Distance between centres 500 mm Spindle bore 40 mm Stepless speed 30 - 4,000 rpm 24 longitudinal feeds 0.02 - 0.63 mm/rev 24 facing feeds (longitudinal feeds x 8) 0.006 - mm/rev Metric threads mm/pitch Inch threads 80 - 2 TPI Module threads Module Spindle drive 1.5 kW Total drive 4 kW - 380 V - 50 Hz Weight 800 kg Accessories / Special equipment • SIEMENS 3-axis digital readout with X-axis, Z-axis and incremental Z-axis (compound slide) Dsdpfx Asvm Dv Djhrouw • Multifix-A quick-change toolpost • Equipped with a 3-jaw chuck from WEILER 140 mm, mounted • Machine base with tool storage, integrated control cabinet, cooling system • Operating manuals Condition : very good – ready for demonstration Ideal for training workshops Delivery : ex stock – as inspected Payment : strictly net on collection – after receipt of invoice We look forward to your order. Further lathes of all sizes available from stock – please enquire.

Būklė: naudotas, Gamybos metai: 2010, X-axis travel 400 mm Y-axis travel 300 mm Dsdpfx Ahsv T Np Nsreuw Z-axis travel 400 mm Total power requirement 3.6 kW Machine weight approx. 1.3 t

Būklė: labai geros būklės (naudotas), Gamybos metai: 1998, x-axis travel 800 mm y-axis travel 600 mm z-axis travel 500 mm O F F E R We can offer you, subject to prior sale and errors excepted, ex-stock and without obligation: HERMLE 5-Axis Universal Machining Center in gantry design with swivel rotary table Model: C 800 U Year of manufacture: 1998, Serial No. 12648 _____ Milling head travel X-axis: 800 mm Milling head travel Y-axis: 600 mm Milling head travel Z-axis: 500 mm NC swivel axis A-axis: -20 / +90° NC rotary table C-axis: 360,000° Dsdsx Dndcspfx Ahrsuw Maximum vertical spindle overhang: approx. 600 mm Installation height under spindle max.: approx. 100 / 600 mm Table size (swing diameter Ø 630 mm): 540 x 540 mm Maximum table load: approx. 300 kg Spindle taper: SK 40 Spindle speeds vertically, infinitely variable: 18,000 rpm Feeds/rapid traverse, infinitely variable: 2 – 35,000 mm/min Feed force approx.: 11/16 Nm Spindle drive: 15 kW Total power consumption: approx. 37 kW - 400 V - 50 Hz Weight: approx. 8,000 kg Equipment / Special features: • Compact, modified gantry design with 3 axes in the milling head for feeds up to 35 m/min. All drive mechanisms and guides are located outside the working area. • Machine bed made from mineral cast, offering high damping properties, foundation-free installation, high static and dynamic stability. • SIEMENS 5-axis path control type 840 D with graphics and all modern programming options for full 5-axis machining of complex workpieces, with electronic handwheel • NC swivel rotary table (C-axis 360,000° / B-axis -20/+90°) Ø 630 mm • Rigid vertical head with HERMLE milling spindle up to 18,000 rpm with automatic swivelling nozzle block • Tool changer with extended (side) magazine for up to 87 tools • Coolant system with chip conveyor, oil mist extraction with filter, full enclosure • Extensive accessories including approx. 50 tool holders, operating manuals Condition: Very good – machine currently powered up and can be demonstrated A video of the machine will be available shortly (please click on the link): Delivery: ex stock – immediately available, FCA Metzingen Payment: strictly net – due immediately upon receipt of invoice, prior to delivery

Būklė: labai geros būklės (naudotas), Gamybos metai: 1980, Swing diameter 300 mm Turning length 1,700 mm Swing diameter over bed slide 600 mm Total power requirement 12.5 kW O F F E R We can offer you, without obligation and subject to prior sale and errors, ex-stock: WEISSER HEILBRONN LZS - Universal Lathe Model HEKTOR Year of manufacture: 1980 Centre height 300 mm Max. swing diameter over bed 600 mm Max. swing diameter over slide 390 mm Dusdsytg Uyopfx Ahrew Distance between centers 1,700 mm Spindle bore / Morse Taper 5: 88 mm 14 spindle speeds 18 – 900 rpm Longitudinal feeds 0.028 - 0.8 mm/rev Face feeds 0.03 - 0.5 mm/rev 40 metric threads 0.4 – 14 mm/rev 38 Whitworth threads 2 – 72 TPI Spindle drive 12.5 kW Total drive power 14 kW - 380 V - 50 Hz Weight 2,500 kg Accessories / Special Equipment: • Hardened and ground guideways • Removable gap bridge for larger turning diameter • 3-axis HEIDENHAIN digital readout with tool memory function • Mounted FORKARDT 3-jaw chuck 315 mm diameter with a robust chuck guard complying with CE safety standards • Equipped with a 4-jaw chuck 315 mm diameter and a 3-jaw chuck 315 mm diameter, with an additional steady rest • Quick change tool post with 6 tool holders • Rear chip guard with coolant installation and separate chip container • Drill chuck and tapping chuck, other accessories, etc. Condition: good – ready for demonstration / Ideal machine for the workshop Delivery: ex-stock – as inspected Payment: strictly net upon collection – after receipt of invoice We look forward to receiving your order. Further lathes in all sizes available from stock – please inquire.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1978, Grinding length: 500 mm Grinding width: 200 mm O F F E R We can offer you the following from stock, subject to prior sale and errors: JUNG Universal Horizontal Surface & Profile Grinding Machine Model: HF 50 RD Year of manufacture: 1978 _____ Max. grinding length: 500 mm Max. grinding width: 200 mm Table size: 600 x 200 mm Table speed: 1 – 20 m/min Working height under grinding wheel approx.: 350 mm Grinding wheel dimension: 225 x 25 x 51 mm Infinitely variable grinding wheel speed: 1,000 – 4,000 rpm Vertical feed: 0.001 – 0.01 mm/stroke Grinding spindle drive stepless, GS: 0.5 to 1.5 kW Total drive power approx.: 4 kW - 380 V – 50 Hz Weight approx.: 2,000 kg Accessories / Special features: • Thanks to the infinitely variable spindle speeds, this version is also suitable for grinding high-alloy tool steels. The grinding wheel diameter as well as the peripheral speed are set directly at the conversion cabinet. • Automatic grinding carriage feed for both surface and profile grinding operations, with • automatic feed cutoff via contact dial gauge • Automatic operation cycle – rough grinding, finish grinding, spark out – adjustable for all standard grinding processes with and without automatic feed, with continuous cross feed or with table reversal, plunge grinding and profile grinding without cross feed. • Rapid traverse for grinding head vertical adjustment, short-stroke function, fine cross feed Duodpfszbczrox Ahrew • Digital readout for the Y-axis for precise positioning, especially for profile grinding. • Manual straight dresser mounted above the grinding wheel, separate radius dresser (DIAFORM dressing unit for profile dressing also available) • Built-in sine permanent magnetic chuck, 500 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and belt filter • Approx. 3 flanges with and without grinding wheels, balancing scale, operating manuals Condition: Good to very good! Suitable for all grinding tasks! Please click here for a video of the machine: HF50RD/4 Availability: Ex stock, immediate delivery possible, FCA Metzingen Payment: strictly net – after receipt of invoice Always a large selection of grinding machines in stock – please submit your enquiry!

Būklė: naudotas, Gamybos metai: 1995, Swing diameter over bed: 50 mm Spindle bore: 26 mm Turning length: 275 mm Total power requirement: 12 kW Machine weight approx.: 4,500 kg T O R N O S CNC-controlled bar automatic lathe with movable spindle (Swiss-type lathe) Model: ENC - 264 Year of manufacture: 1995 No. 160 409 _____ Bar capacity min./max. Ø: 4 - 25.4 mm Turning length or maximum slide travel: 275 mm Infinitely programmable spindle speeds: 10 - 6,000 rpm Feed/rapid traverse max.: 10,000/15,000 mm/min Drilling/thread cutting capacity: 16 mm / M16 Resolution (X and Y axis): 0.0005/0.00025 mm Main spindle drive: max. 5.5 kW Dujdst Hwp Tspfx Ahrow Total drive approx.: 12 kW - 400 V - 50 Hz Weight: 4,500 kg Accessories / Special Equipment • FANUC 4-axis CNC path control, model Series O-TT with color monitor and all standard features, graphics, cycles, subprograms, handwheel, etc. • Machine configuration: - Movable spindle with max. travel 275 mm (Z axis) - 5 lateral tools actuated by linkage, with a driven drilling and milling unit, X-axis approx. 35 mm - End station with 4 tool positions on one slide: 3 fixed drilling units and one powered counter-spindle. Drive connections for drilling units available; powered drilling units not present. Center distance 90 mm / 125 mm, X2 travel = 355 mm / Z travel = 100 mm (NC axes) - FMB automatic bar feeder for bars up to 3,000 mm with hydraulics - Pneumatic parts catcher with discharge conveyor belt • Various tool holders for 20x20 mm shank, hydraulic cross-slide for side mounting, various long and short collets, and miscellaneous accessories • Complete enclosure, coolant system—no chip conveyor currently fitted, and no rear machining possible at present. The machine is ideal for medium to large production runs and is very easy to program, offering the highest precision. Condition: good to very good – soon available for demonstration Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order – please always inquire about your requirements with us.

Būklė: naudotas, Gamybos metai: 1999, x-travel 800 mm y-travel 630 mm z-travel 560 mm Total power requirement 60 kW Machine weight approx. 12.5 t Space requirement approx. [please specify] m H E L L E R CNC-controlled horizontal 5-sided machining centre Model: FST-MC 160/800 / E Year of construction: 1999 – but only approx. 500 hours in operation Work area: Longitudinal travel X-axis: 800 mm Vertical travel Y-axis: 630 mm Cross travel Z-axis: 560 mm NC rotary table – tilting axis (A-axis) 180° Rotary axis (B-axis) 360° Max. workpiece size approx. 450 x 450 x 340 mm (larger dimensions possible with restrictions) Pallet size approx. 450 x 620 mm Tool holder: HSK 63A Spindle speeds (infinitely variable): 63 – 20,000 rpm Feed/rapid traverse XYZ: 1 – 70,000 mm/min Spindle drive power: 24 kW Total drive approx. 60 kW – 400 V – 50 Hz Weight approx. 12,500 kg Dusdpst Hwrhjfx Ahrow Accessories / Special Features: • 5-axis CNC path control SIEMENS SINUMERIK 840 D for genuine 5-sided machining • Workpiece handling system: workpiece is mounted externally on a pallet and transported via a roller conveyor into a lifting/rotating device, which then moves the pallet onto the rotary/tilting table for automatic clamping and machining • 40-position tool magazine with loading station, laser tool breakage control • Internal coolant supply HD-50 bar • High-end coolant preparation system with filter and temperature control • Oil mist extraction • Separate cooling unit for motor spindle and control cabinet • CO2 fire extinguishing system • Swarf conveyor and complete enclosures • Spacious operator platform for personnel and monitoring, height 600 mm Price ex stock plus VAT: €89,000 This machine comes from the development department of a vehicle manufacturer and was only used for trial purposes. The original new price was approx. 1.3 million DM. This is a rare opportunity for medium-volume production, particularly ideally suited for aluminium processing.

Būklė: naudotas, Gamybos metai: 2000, Grinding length 1600 mm Grinding width 600 mm Workpiece height 500 mm Total power requirement 50 kW Q U O T A T I O N We are pleased to offer you, subject to prior sale and errors, ex stock: Duodpfjt Hxcbjx Ahrow B L O H M CNC-controlled precision surface grinding machine Model PLANOMAT 616 with SIEMENS 840 D control Year of manufacture 2000 Serial no. 14 67x _____ _____ Grinding area 1,600 x 600 mm (!) Table dimensions 2,000 x 600 mm Working height under grinding wheel approx. 150 – 500 mm Max. longitudinal table travel X 1,700 mm Max. vertical movement of upper carriage Y 550 mm Max. cross movement of upper carriage Z 560 mm Max. workpiece weight approx. 800 kg Table speed X-axis 30 – 30,000 mm/min Min. cross feed Z-axis 0 – 4,000 mm/stroke Vertical feed Y-axis 0.001 – 0.099 mm/stroke Y/Z axis feed rate 4 – 4,000 mm/min Grinding wheel Ø x width approx. 400 x 100 mm Infinitely variable grinding wheel speed via GS motor 300 – 1,250 rpm Spindle drive max. approx. 27.5 kW Total power requirement approx. 50 kW - 400 V – 50 Hz Total weight approx. 10,000 kg Accessories / special equipment: • SIEMENS CNC control 840 D with screen; SIEMENS components, WINDOWS interface Model MMC 103/PCU 50, operator guidance for direct entry of all grinding parameters, including roughing/finishing/spark-out cycles, slot grinding with (cross-) indexing device, automatic shut-off upon reaching grinding depth and return to home position, grinding wheel management, dressing programs/cycles, hand-held remote, etc. • All axes driven by ballscrews, DITTEL contact control • Infinitely variable grinding spindle speed via direct GS motor • Table-mounted diamond wheel dressing unit type PEA, electrically driven, with DITTEL gap control device, and separate straight dresser with diamond fleece and compensation; dressing cycles integrated in the control • Fitted magnetic chuck approx. 500 x 1,500 mm, make WAGNER, with demagnetising device • Attached electrical cabinet, separate flanges with wheels, separate oil mist extractor, complete work space enclosure with sliding door and glass insert • Large HOFMANN coolant system TECHNOPUR S 300 with cooling unit and grinding sludge conveyor, tank 1,600 l or 1,280 l, separate oil mist extraction, etc. Condition: Good to very good – soon ready for demonstration, extremely large and stable machine (!) Delivery: Ex stock – as inspected Payment: Strictly net – upon receipt of invoice We look forward to receiving your order. Further grinding machines of all types in stock. Please inquire.

Būklė: naudotas, Gamybos metai: 1981, Workpiece length 1500 mm Stroke 0 mm Swing diameter 500 mm Total power requirement 30 kW Machine weight approx. 8 t Required footprint approx. m NAGEL Crankshaft Belt Finishing Machine Type UF 16 – 150 K 86 S Year of manufacture unknown (according to electrical diagram 05/81) Workpiece diameter min. / max. 80 - 160 mm Workpiece swing diameter approx. 500 mm Workpiece clamping length approx. 1,500 mm Workpiece speed steplessly adjustable (hydraulic motor) Number of superfinish units 14 Chuck diameter in belt guide max. approx. 200 mm Total drive power approx. 30 kW – 400 V – 50 Hz Weight approx. 8,000 kg Dodpfx Ahot Hwpmereuw Equipped with: 14 belt feeders on a longitudinally adjustable rotary axis, some with belt guides and rear-side belt take-up device with guide shaft. Used belt material is collected at the rear of the machine. Hydraulic-mechanical workpiece feed system with lifting device for positioning parts into the center-holders; after processing, the part is lifted out again. Workpiece drive via the left center unit using a hydraulic motor; workpiece is clamped using hydraulic tailstocks on right and left. Separate control cabinet, separate hydraulic unit with two large pumps, coolant system, etc. Condition: Satisfactory to good (previously in use at VOLVO) – currently not under power. Ideal machine for overhaul / modernization / etc. Payment: Net in full – upon receipt of invoice Delivery: Immediate ex stock possible We have approximately 100 further grinding machines in stock; please contact us for more information.

Gamybos metai: 1990, būklė: naudotas, x-travel 4070 mm y-travel 1185 mm z-travel 1985 mm Total power requirement: kW Machine weight approx. 15 t Space requirement approx. 6000 x 4500 x 4000 mm Longitudinally movable measuring stand X-axis: 4,070 mm Measuring carriage crosswise as Y-axis (measuring head): 1,185 mm Measuring carriage vertical as Z-axis (vertical): 1,985 mm Measuring head adjustment rotary axis: 360° Pitch axis (left/right): 220° Measuring plate: 5,000 x 2,000 mm Duodpfx Ahst Hwt Esrow Weight approx.: 15,000 kg Required floor space approx.: 6,000 x 4,500 x 4,000 mm Special features / Accessories: - Direction-dependent switching 3D touch probe with rotary/swivel device - Universal 3D measurement software KOROS CAD 5.2.0, installed 11/2001 (with numerous extensions) for manual or automatic measurement of standard geometries and freeform surfaces, ideally suited for automotive bodywork, mechanical parts, and forming tools - Separate control cabinets (Master F 1) with programming stations and a mobile hand control panel - Level-adjustable steel clamping plate 2000 x 5000 mm - The machine has been serviced annually by DEA and the software updated regularly. Condition: very good – machine in stock, set up, powered, and ready for demonstration Delivery: ex stock – in existing condition as seen Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further measuring machines always in stock.

Būklė: naudotas, Gamybos metai: 1990, x-axis travel 400 mm y-axis travel 330 mm z-axis travel 350 mm Total power requirement 6.3 kW Machine weight approx. 2 t Space requirement approx. 736 m O F F E R We are pleased to offer you, subject to prior sale and errors excepted, from stock without obligation: H E R M L E CNC controlled Universal Tool Milling Machine with 4th Axis Model UWF 600 CNC (HDH TNC 355) Year of manufacture 1990 # 8637 Table travels: longitudinal X 400 mm vertical Z 350 mm cross Y 330 mm Table size 630 x 335 mm Spindle taper SK 40 Spindle speeds in 3 stages, vertical & horizontal 40 – 6,000 rpm Quill travel, vertical 63 mm Feeds, stepless 1 – 2,000 mm/min Feed force 4,800 N Rapid traverse 5,000 mm/min Spindle drive 3.5 kW Total drive 6.3 kW - 380 V - 50 Hz Weight 2,000 kg Accessories / Special Equipment • HEIDENHAIN 4-axis path control Type TNC 355 with graphics and various sub-programs, mobile electronic handwheel • Fixed angle table installed, equipped with CNC dividing head by HOFMANN, type with RÖHM 3-jaw chuck 160 mm diameter, center height approx. 125 mm, possibly also tiltable. Resolution 0.001 ° (dividing head can be removed if required!) • Vertical head can be easily swung away for use of horizontal spindle • Hydraulic tool clamping in V-spindle, 5 different milling arbors • Separate free-standing control cabinet, separate free-standing coolant system Dsdpot Hxbwjfx Ahrouw • Central lubrication, ammeter display, etc. Ideal machine for toolmaking and production of electrodes Condition: good – ready for demonstration, controller in HDH unit has been replaced Delivery: ex-stock as inspected Payment: strictly net - upon receipt of invoice Other conventional and CNC milling machines from DECKEL, MAHO, MIKRON or HERMLE and other well-known manufacturers in stock! Please enquire with us.

Būklė: naudotas, Gamybos metai: 1998, Drehdurchmesser 570 mm Drehlänge 2000 mm Steuerung Gesamtleistungsbedarf 15 kW Maschinengewicht ca. 3,5 t Raumbedarf ca. m A N G E B O T Wir können Ihnen ab Lager, Irrtum und Zwischenverkauf vorbehalten, unverbindlich anbieten: SEIGER CNC zyklengesteuerte Universaldrehmaschine Typ SLZ 570 / 2 x 2000 Baujahr 1999 981 01x --- Drehdurchmesser über Bett: 570 mm Drehdurchmesser über Schlitten: 340 mm Spitzenweite / Drehlänge: 2.000 mm Supportwege X-Achse / Z-Achse: 260 / 2.050 mm Spindelbohrung: 65 mm Spindeldrehzahlen (2-stufig) stufenlos regelbar: 1 – 2.500 /min Drehmoment max.: 1.600 Nm Vorschub X-Achse max. / Eilgang: 7.000 mm/min Vorschub Z-Achse max. / Eilgang: 10.000 mm/min Vorschubkraft X-Achse / Z-Achse: 7.000 / 10.000 N Reitstock-Pinolenhub / Aufnahme: 160 mm / MK 5 Spindelantrieb: 16 kW Dusdeugawfspfx Ahrew Gesamtantrieb ca.: 20 kW - 400 V – 50 Hz Gewicht ca.: 4.000 kg Zubehör / Sonderausstattung: • Die Maschine ist manuell mittels elektronischer Handräder zu bedienen oder automatisiert mit der CNC-2-Achsen-Zyklen-Steuerung HEIDENHAIN - Manual Plus M mit grafisch unterstützter, dialoggeführter Programmierung. Über einen Farbmonitor erfolgt die Anzeige der aktuellen Achspositionen mit Restwertanzeige sowie die Eingabe der Schnittdaten, Schnittgeschwindigkeiten (auch konstant), Zielpunkte (absolut & relativ). • Einfache und schnelle Werkstatt-Programmierung durch vorprogrammierte, grafisch dargestellte Zyklen aller Art. Zusätzliche ICP- und DIN-Programmierung für HEIDENHAIN installiert. • MULTIFIX Universal-Werkzeughalter Größe C mit Wechselhalter • Manuelles 3-Backenfutter Ø 250 mm (Spindelkopf Gr. 8) mit stabilem Futterschutz • Manueller Reitstock mit Pinolenaufnahme MK 5 und Pinolenhub • 1 Stück geschlossene Lünette Ø ca. 135 mm, 1 Stück offene, mitlaufende Lünette Ø ca. 125 mm • Kühlmitteleinrichtung mit Späneförderer • Verfahrbare Schutztüren mit Sicherheitseinrichtung, Arbeitsleuchte • Zentralschmierung, Bedienwerkzeuge, Bedienungsanleitungen Zustand: Guter Zustand, unter Strom vorführbereit! Ideal für Werkstattbetrieb, Einzelteil- oder Kleinserienfertigung! Lieferung: ab Lager, sofort verfügbar, FCA Metzingen Zahlung: rein netto - nach Rechnungserhalt Ständig eine Auswahl an CNC-Bearbeitungszentren aller Art am Lager – bitte fragen Sie auch nach Alternativen! Q U O T A T I O N We are pleased to offer you ex stock, subject to prior sale and errors in specification: SEIGER CNC Universal Teach-In Lathe with HEIDENHAIN MANUAL M Control Model SLZ 570 / 2 x 2000 Year 1999 981 01x --- Swing diameter over bed: 570 mm Swing diameter over cross slide: 340 mm Centre distance / Turning length: 2,000 mm Travel X-axis / Z-axis: 260 / 2,050 mm Spindle bore: 65 mm Spindle speeds (2 ranges), stepless: 1 – 2,500 rpm Maximum turning torque: 1,600 Nm X-axis feed max. / rapid traverse: 7,000 mm/min Z-axis feed max. / rapid traverse: 10,000 mm/min Feed force X-axis / Z-axis: 7,000 / 10,000 N Tailstock quill stroke / taper: 160 mm / MT 5 Spindle drive: 16 kW Total connected load approx.: 20 kW - 400 V – 50 Hz Weight approx.: 4,000 kg Equipment / Special Features: • The machine can be operated manually using electronic handwheels or automatically with the CNC 2-axis cycle control HEIDENHAIN - Manual Plus M with graphics-supported, dialog-guided programming. The colour monitor displays the current axis positions with residual value display, as well as input of cutting data, cutting speeds (incl. constant surface speed), and target points (absol

Būklė: naudotas, Gamybos metai: 1990, Fräslänge 2100 mm Fräsbreite 300 mm Modul - max. 16/18 Modul - min. Gesamtleistungsbedarf 10 kW Maschinengewicht ca. 5 t Raumbedarf ca. m D O N A U - K N A P P Universal - CNC gesteuerte Zahnstangenfräsmaschine Type UZFM - V 300 H - CNC Baujahr 1990 # 90-244x _____ max. Verzahnungslänge 2.100 mm Fräsweg/Fräsbreite quer max. 300 mm Modulbereich St/GG max. 16/18 Tisch-Aufspannfläche 510 x 2.400 bzw. 275 x 2.120 mm Einbauhöhe unter Fräs-Spindel-Achse min./max. 150 / 430 mm Fräser-Ø min. / max. Ø 125 + 2 x Schnitttiefe / 280 mm Fräserbreite max. fliegend / mit Gegenlager 50 / 140 mm Fräserdorn-Ø max. 22 - 50 mm Frässpindelkopf schwenkbar rechts / links (Hinterfräsungen) 30 / 45 ° Frässchlitten schwenkbar rechts / links (Schrägverzahnung) 30 ° 9 Spindeldrehzahlen 40 - 120 U/min. Vorschübe stufenlos (Frässchlitten) / Eilgang 0 - 1.300 / 2.000 mm/Min. Tisch-Eilgang 10.000 mm/Min. Frässpindelantrieb 5,5 kW Gesamtantrieb 10 kW - 400 V - 50 Hz Gewicht 5.000 kg Zubehör / Sonderausstattung: o SIEMENS - CNC - Steuerung Model M 810 für die Teilachse ( X ), sodaß eine schnelle Umstellung der Maschine möglich ist ohne Wechselräder. Teilschritte 0,001 - 2100 mm, auch unterschiedliche Teilungsdistanzen programmierbar, " Einstellung aller Vorschub- und Eilgangwege über die Hydraulik, Vorschub einstellbar für 2 Schnitte, Wegbegrenzung der Achsen über voreinstellbare Endschalter o Aufgebaute hydraulische Werkstückspanneinrichtung ca. 2.000 x 160 mm lang o verstärkter Fräskopf mit stufenlos regelbare Fräserdrehzahl o separat stehender Schaltschrank und Hydraulikanlage , im Tisch Duodpfx Ahjt Hwwqersw eingebauter Späneföderer und separat stehender Späneförderer mit Kühlmitteleinrichtung, Zentralschmierung, etc. Die Maschine könnte auch mit einer aktuellen SIEMENS-Steuerung nachgerüstet werden! Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale and error in technical data: D O N A U - K N A P P (Germany) Universal - CNC-Controlled Rack Milling Machine Model UZFM - V 300 H - CNC Year 1990 Serial No. 90-244x _____ Max. Cutting length 2.100 mm Milling travel / milling width cross max. 300 mm Module in steel / cast iron, max. 16 / 18 Table clamping size 510 x 2.400 resp. 275 x 2.120 mm Mounting height under cutter, depending on cutter Ø 150 - 430 mm Cutter Ø, min./max Ø 125 + 2 x cutting depth / Ø 280 mm Cutter width max. without/with counter bearing support 50 / 140 mm Cutter mandrel Ø max. 50 mm Milling spindle head, swivelling ( for relief cuts ) right / left 30 / 45 ° Milling spindle speeds steplessly adjustable 40 - 120 rpm Milling slide swivelling right / left for Helix Cuts 30 ° Feeds, infinitely variable (milling slide) 0 - 1.300 / 2.000 mm/min Quick return of WP-table 10.000 mm/min Milling spindle drive 5,5 kW Total electrical load 10 kW - 400 V - 50 Hz Weight 5.000 kg Accessories / Special Features: * SIEMENS-CNC-Control for the Indexing axis ( X ) so th...

Gamybos metai: 1986, būklė: naudotas, x-axis travel 2400 mm y-axis travel 1600 mm z-axis travel 1800 mm Total power requirement: kW Machine weight approx. 3300 kg Space requirement approx.: m S T I E F E L M A Y E R Manually movable 3D measuring and scribing machine Type: System C - 160 Year of manufacture: 1986/1999, measuring stand no.: 2429 08 85 Working area: X-axis (horizontal) approx. 2,400 mm Y-axis (transversal) approx. 1,600 mm Dodpfx Ahet Hwxnerouw Z-axis (vertical) approx. 1,800 mm Worktable size: 3,000 x 2,000 x 360 mm Table height above floor: 700 mm Table thickness approx.: 360 mm Assembled machine height: 2,800 mm Approximate weight: 3,300 kg Special equipment / accessories: • Measuring table divided into 2 halves, each 1,500 x 2,000 mm • Side-mounted measuring slide system System C with cross section 160 x 160 mm or 80 x 80 mm for Y-measuring arm • Side rule stops approx. 2,200 mm long • Installed MZ 2000 measuring counter as digital display with network connection and RS232 interface, as well as all functions for model making • 10 height-adjustable leveling feet • Extensive accessories for scribing and measuring • Including RENISHAW probe Condition: good to very good – available from stock, under power Delivery: ex stock – as inspected Payment: strictly net – after receipt of invoice We look forward to receiving your order. Furthermore, we have other measuring machines and measuring tables in various sizes in stock. Please inquire with us.

Būklė: naudotas, Gamybos metai: 1991, Turning diameter: 42 mm Turning length: 250 mm Control system: Total power requirement: kW Machine weight approx.: t Space requirement approx.: m GILDEMEISTER Universal 8-axis CNC lathe with bar feeder Model: GAC 42 Year of manufacture: 1991 Serial no.: 5.1096 Bar diameter: 42 mm Chuck diameter: 140 mm Spindle bore: 56 mm Spindle speeds (max. 485 Nm): 71 - 6,300 rpm The machine is equipped with 2 units of 2-axis side cross slides, 2 units of 1-axis side cutoff slides, and 1 unit of 2-axis turret slide. Turret slide traverse X5/Z5: 40 / 274 mm Feed rate / rapid traverse: 5 / 15 m/min Feed force X/Z: 600 / 1,120 daN Cross slide traverse X3/Z3, X4/Z4: 70 / 164 mm Feed rate / rapid traverse: 5 / 8 m/min Cutting slide traverse X1, X2: 70 mm Feed rate / rapid traverse: 5 / 8 m/min Spindle drive: 18 kW Total power approx.: 25 kVA - 380 V - 50 Hz Weight: 4,500 kg Accessories / Special equipment: - GILDEMEISTER 8-axis CNC path control type EPL 2 with color screen, electronic handwheel, and all standard options including graphics, cycles, subprograms, parallel programming, etc. - 4 CNC side slides (2 with X/Z axes, 2 with X-axis) with presettable quick-change system, tool shank 20 mm (square) - 8-position tool turret VDI 30, 4 stations driven, for drilling, milling, thread cutting with driven tools, or for - Rotating pick-off device (chuck diameter 80 mm) for rear machining using a linear tool carrier mounted on the right bed side (max. 3 tools) - Hydraulic hollow clamping device with collet chuck - SAMECA hydrostatic bar feeder MONOSAM 45 - 2-circuit coolant system, BMF chip conveyor, lockable sliding door, various driven tool holders, operating manual, and other accessories Thanks to the combination of the advantages of the turret with driven tools, rear-side machining, and 4 CNC side slides, this machine offers extremely flexible application possibilities! Condition: good to very good – ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice Dujdpfx Ahjt Hwz Aerow We look forward to receiving your order. Additional conventional and CNC lathes in stock – please inquire with us.