Nissens Šaltas Aliuminio Korpusas pirkti naudotą (3 260)

Gamybos metai: 1995, būklė: naudotas, Only pre-clarified products with a composition that provides normal filterability may be processed with this filtration unit. Machine (Additional): CFS System Flow rate: 400 hl/h continuous Operating pressure: 6 bar Operating temperature: 105 °C Capacity: 1,456 l Current: 10 A Voltage: 220 V Lhodpfx Akovcqv Noveh Water supply: Cold water: min. 150 hl/h; Hot water (max 65 °C): min. 150 hl/h Compressed air: Process air: 4 - 6 bar; Control air: 5 - 8 bar Length: 1.4 m Width: 1.3 m Height: 1.9 m Base structure: Base frame with control and measuring components and filter vessel; cleaning module Equipment: 98 filter candles, 3 piston diaphragm pumps (dosing), centrifugal pump with frequency converter (WT circuit), various analog and digital sensors (flow, pressure, level, temperature, conductivity), various valves, control cabinet Weight: 3,450 kg

Gamybos metai: 2001, būklė: naudotas, The Pall CFS system is designed as a standalone unit and can be installed directly upstream of the filling line without the need for a buffer tank. It is a fully independent process unit consisting of the following components: filter vessel, piping and connections, membrane cleaning system (CIP), integrity testing system, and control panel. The hygienic design, straightforward integrity testing, and full automation ensure the system's microbiological safety and allow operation typically by filling line personnel. Cluster filtration arranges filter elements into clusters. Each cluster is equipped with its own outlet valve. During filtration, all clusters are open. Cleaning, sterilization, and integrity testing are performed per cluster. Advantages of the CFS principle: - Extended service life - On-site integrity testing - Cluster-specific integrity diagnostics - Special rinsing function - High specific flow rate - Short rinsing times - Uniform flow through all filter elements - Minimal water consumption - Fast replacement of filter elements - Controlled back-flushing - Minimal beer loss - High biological safety - Continuous availability This filtration system is suitable only for pre-clarified products that exhibit normally filterable characteristics in their composition. Machine (Additional Information): CFS System Flow rate: 400 hl/h continuous Operating pressure: 6 bar Operating temperature: 105 °C Volume: 1456 l Lodpfxevcqx Ds Akvohh Current: 10 A Voltage: 220 V Water: Cold water: min. 150 hl/h; Hot water (max 65 °C): min. 150 hl/h Compressed air: Process air: 4–6 bar; Control air: 5–8 bar Length: 1.40 m Width: 1.20 m Height: 1.85 m Basic construction: Base frame with control, measurement components, and filter vessel; cleaning module Equipment: 98 filter cartridges, 3 piston membrane dosing pumps, centrifugal pump with frequency inverter (WT circulation), various analog and digital sensors (flow, pressure, level, temperature, conductivity), various valves, control cabinet Weight: 3,450 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2012, KASTO U 10 / Metalo diskinis pjūklas su medžiagos padėjimo staleliu - CE žymėjimas - Gamybos metai: 2012 - Pjovimo sritis / apvalus 90°: 100x100 mm - Pjovimo sritis / plokščias 90°: 90x90 mm Lhjdpfx Akjzakq Esvjh - Pjovimo sritis / kvadratas 90°: 170x90 mm - Kampinio pjovimo įranga - Aušinimo skysčio sistema - Spaustuvas su priešspaude švariems pjūviams be atplaišų - Be laipsnių reguliuojamas pjūklo įstūmimas - 2 pjovimo greičiai - Diskinio pjūklo matmenys: 350x2,5x32 mm - Pjūklo variklis: 1,8 kW Matmenys: Ilgis x Plotis x Aukštis 1,2 x 0,8 x 1,9 m / Svoris 500 kg Gali būti netikslumų ar įvedimo klaidų.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, pjovimo aukštis (maks.): 350 mm, bendras ilgis: 15 000 mm, bendras svoris: 2 500 kg, įvesties srovės tipas: trifazis, Įranga: sūkių greitis be galo kintamas, MYYDÄÄN: Kaltenbach KBS 400 DG + NA 400 – Automaattinen vannesahalinja Huippuluokan saksalaista tekniikkaa ammattimaiseen teräsrakenteiden valmistukseen. Tämä Kaltenbach-vannesahalinja on suunniteltu suurten tuotantomäärien leikkaamiseen, tarjoten erinomaista tarkkuutta ja korkean automaatiotason. Paketti sisältää: - Kaltenbach KBS 400 DG: Puoliautomaattinen vannesaha kaksoisviisteleikkauksella. - Kaltenbach NA 400: NC-ohjattu materiaalinsyöttölaite (työntäjä) täysin automatisoituun sarjaleikkaukseen. - Rullaradat: Raskaan sarjan syöttö- ja ulostulorullat. Tekniset tiedot: Valmistaja: Kaltenbach GmbH + Co. KG, Saksa Malli: KBS 400 Vuosimalli: 2008 Jännite: 400 V / 50 Hz Pääsulake: 35 A (Kokonaisvirta 25 A) Ohjausjännite: 24 V DC / AC Lsdpfxsy Rvfwo Akvshh Tärkeimmät ominaisuudet: - Kaksoisviiste (DG): Sahakehys kääntyy molempiin suuntiin, joten monimutkaiset kulmaleikkaukset onnistuvat helposti ilman profiilin kääntämistä. - NC-ohjattu syöttö: NA 400 -yksikkö takaa tarkan mittatarkkuuden ja automatisoidun syötön, mikä tehostaa tuotantoa ja vähentää manuaalisia virheitä. - Luotettavuus: Kaltenbach tunnetaan vankkatekoisista rungosta ja pitkäikäisistä hydraulijärjestelmistä. Kunto: Hyvin huollettu teollisuuslaite, heti käyttövalmis. Täydellinen ratkaisu teräsrakenteiden valmistajille, jotka haluavat automatisoida profiilien leikkauksen luotettavalla, teollisuusstandardit täyttävällä tekniikalla.

Būklė: naudotas, Gamybos metai: 1995, Pjūklo disko skersmuo: 400 mm Pjovimo skersmuo: 130 mm Pjūklo disko apsukos: 30 / 60 aps./min Pjovimo sritis prie 90°: kvadratas 120 mm Bendras galios poreikis: 4,8 kW Staklių svoris: apie 1,8 t Matmenys (I x P x A): 1,4 x 1,2 x 2,3 m Pusiau automatinė šalto rato pjovimo staklės - Kampinis pjovimas - Mikro purškimo įranga - Apsauginis gaubtas Lhodpfey Umcbsx Akveh - Avarinio stabdymo įranga

Būklė: geras (naudotas), 5 vnt. mobilios aliumininės perkrovimo rampos, – naudotos –: Kaina už vienetą vietoje: Ljdpfx Akey Iv I Hsvshh Tipas 1: standartinė (apie 2 vnt.) dabar tik 450 € vietoj 650 € (be PVM)! Tipas 2: su dviem šoniniais laipteliais (apie 3 vnt.) dabar tik 550 € vietoj 850 € (be PVM)! Gamintojas: nežinomas, galbūt Altec Tipas: nežinomas, galbūt HF 09 Pagaminimo metai: nežinoma Plotis: apie 1,50 m Ilgis su judančiomis užvažiavimo rampomis galuose: apie 2,35 m Keliamoji galia: nežinoma, galbūt 1800 kg Savasis svoris: nežinomas, galbūt 107 kg Naujos kaina maždaug 1 900 € (be PVM) Būklė: gera Prieinama: iš karto Vieta: Niedernberg prie Aschaffenburg

Būklė: naujas, Pjūklo disko matmenys: 350x32x4 mm Spaustuvai: 180 mm 2 greičiai: 1700/3400 aps/min Pjovimo sritis 90°: apvalus 120 mm Pjovimo sritis 90°: kvadratinis 105 mm Pjovimo sritis 90°: plokščias 180x70 mm Pjovimo sritis 45°: apvalus 120/110 mm Pjovimo sritis 45°: kvadratinis 100/95 mm Pjovimo sritis 45°: plokščias 135x60 mm Lodpfx Akjy Dh Nnevohh Galia: 2,2 kW Svoris: 225 kg COBRA 352 MA modelyje (automatinės spaustuvės), visiškai su pagrindu, spaustuvai automatiškai užsidaro nuleidus pjūklo galvą.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2019, Dviejų kolonų aukštos našumo automatinė juostinė pjovimo staklė BERG & SCHMID SBS 300 VA-1/CNC Pagaminimo metai: 2019 Apvalus pjovimo skersmuo: 300 mm Lodoyw H Enopfx Akvehh Kvadratinis pjovimo skersmuo: 300 mm Plokščio pjovimo matmenys: 300 mm x 260 mm Juostelės greitis: 20 – 100 m/min Moderni SNC 20 valdymo sistema Dažniu reguliuojamas pjovimo pavara Valdymo mygtukai su piktogramomis Varoma drožlių šepetys Hidraulinis juostos įtempimas Spaudimo reguliavimas Darbo lempa Drožlių transporteris 2 m ritininis stalas

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 06211785, Parduodama dėl įsigytos galingesnės siurbimo sistemos – ITALSIME VFQ 630/ES 18,5 kW variklis su sraigtu ir 50 cm skersmens kaminu – įskaitant elektros valdymo skydelį. Variklis lauko montavimui – visada laikytas po apsauginiu stogeliu. Ledpfx Aksykkgnevehh

Gamybos metai: 2000, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Aluminium vertical storage silo with extended support ring Technical Data / Dimensions Available quantity: 4 Ljdpfxey Ufigs Akvjhh Capacity: approx. 174,000 litres Tank type: Silo Condition: Used Food grade: No Design: Vertical Internal diameter: approx. 4,200 mm External diameter: approx. 4,260 mm Cylindrical height: approx. 15,000 mm Total height: approx. 16,250 mm Weight: approx. 3,500 kg Specific weight of medium: 1 t/m³ Operating pressure: Non-pressurized Notes: A new access ladder for the silo installation can be offered optionally. Material / Construction Inner shell material: Aluminium Internal weld seams ground Notes: Material grade AlMg3 / AlSi Equipment Support design: Base ring/support skirt Number: 1 Mounting: Fixed Top base: Conical top Bottom base: Cone Cone angle: 90 degrees Top section: 1 x Roof edge railing, height: approx. 1,200 mm 1 x Access walkway with safety railing 2 x Crane lugs 1 x Manhole DN 500 1 x Connection flange for level measurement 1 x Threaded socket for max sensor 1 x Flange DN 100 (filling) 1 x Vent with hood Shell: 1 x Service door (approx. 1,800 x 850 mm) 1 x Cable protection pipe 1 x Fill line DN 100 (insulated), ending in TW connection 1 x Weld-in adapter for empty indication Bottom section: The silos terminate below in a 90° cone with DN 200 flange with emergency shut-off slide valve. Fittings: The measuring and control technology installed on the silo is included free of charge. However, no guarantee can be given for its proper functionality. Documentation Drawing

Gamybos metai: 2009, būklė: naudotas, Sawing system for aluminum featuring 2 saw motors, each capable of performing independent 45° cuts. Material feed unit with up to 8,100 mm capacity Cross conveyor, outfeed table, chip conveyor, and extraction system included Soundproof enclosure Control via Siemens S7 panel Operating manual and documentation available; further technical details upon request The machine was operational until dismantling Additional technical specifications available upon request or see photos Lsdpsqzmnuofx Akvshh

Būklė: naudotas, Gamybos metai: 1900, Funkcionalumas: visiškai funkcionalus, tūrio srautas: 6 600 m³/val, galutinis slėgis: 2,5 juosta, galia: 610 kW (829,37 AG), įėjimo įtampa: 6 600 V, įėjimo srovė: 69 A, įvesties srovės tipas: Oro kondicionierius, 2 vnt. aušinimo vandens siurbliai. Vertikalus vamzdinio korpuso siurblys su atviru sraigtiniu sparnuote. Gamintojas: KSB. Tipas: SEZ N 8-60. Sparnuotės forma: atvira sraigtinė. Sparnuočių kiekis: 1. Panardinimo gylis: 2550 mm. Veleno sandarinimas: mechaninis sandariklis. Radialinis guolis: RESIDUR pluošto keramika. Atraminis guolis: segmentinis slydimo guolis. Aušinimas: savaiminis, CuNiFe šilumokaitis. Sukimosi greitis: 745 / 600 / 496 aps./min. Tūrinis srautas: 6600 / 5750 / 4750 m³/val. Kėlimo aukštis: 25 / 15,5 / 10,5 m. Veleno galia: 525 kW / 280 kW / 180 kW. Siurblio naudingumo koeficientas: 85,7%. Siurbiamo skysčio temperatūra: 20°C. NPSH: 8,0 m. Korpusas: S235JRG2. Velenas: 1.4313. Sparnuotė: 1.4409. Sparnuotės skersmuo: 766/571 mm. Elektros variklis: Siemens 1LA44548 AW94Z. Galia: 610 kW. Įtampa: 6600 V. Srovė: 69 A. Komplekte – dažnio keitiklis. Matmenys: Išleidimo jungtis: DN 800. Slėgio klasė: PN 10. Siurblio svoris be variklio: 4100 kg. Ilgis su varikliu: 7723 mm. Lhodpfx Akoxb Tvxjveh

Būklė: naudotas, Gamybos metai: 2003, tūrio srautas: 283 m³/val, bendras plotis: 1 183 mm, bendras ilgis: 1 200 mm, bendras aukštis: 2 073 mm, slėgis: 7 juosta, bendras svoris: 605 kg, slėgio rasos taškas: −40 °C, slėgis (maks.): 16 juosta, Įranga: Tipinė plokštelė prieinama, 1 unit of cold-regenerating adsorption dryer Manufacturer: Kaeser Model: DC47E Flow rate: 283 m³/h (4.72 m³/min) Pressure dew point: -40°C Inlet temperature: 35°C Outlet temperature: 35°C Operating overpressure: 7 bar Max. operating pressure: 16 bar Compressed air connection: DN25 (R1") Adsorbent: activated alumina Tank volume: 133 liters Filling weight: 60 kg Dimensions: Height: 2073 mm Width: 1183 mm Depth: 1200 mm Ledov T Tw Repfx Akvohh Weight: 605 kg

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1994, Parduodama Kaltenbach šalto pjūklo pjovimo staklės. Lhjdpfx Aksy T Skbjvoh Pavarų dėžė be laisvos eigos! Tipas: KKS 400 EC E Metų gamyba: 1994 Pjūklo disko Ø: 400 mm Variklio galia: 1,8/2,7 kW Pjovimo greitis: 10/20, 13/26, 15/30 m/min Padavimas: 0 - 1.000 mm/min Greitas įstumimo/išstumimo greitis: 1.550 mm/min Didžiausia darbo sritis: 130 mm Kvadratinės medžiagos darbo sritis: 120 mm Plokščios medžiagos darbo sritis: 305 x 20 mm Apvalios medžiagos darbo sritis: 130 mm Mažiausia darbo sritis: 10 x 10 mm Kampų pjovimo diapazonas: 0° - 90° - 0° Matmenys (IxPxA): 1.080 x 900 x 1.760 mm Svoris: 900 kg Apžiūra / atsiėmimas adresu 89558 Boehmenkirch Siuntimas galimas pagal susitarimą Krovimui yra krautuvas.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, veikimo valandos: 1 809 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 1559, pjūklo disko skersmuo: 550 mm, padavimo ilgis X ašis: 800 mm, bendras ilgis: 2 400 mm, bendras plotis: 2 000 mm, bendras aukštis: 1 800 mm, Apvalaus plieno pjovimo diapazonas ties 90°: 190 mm, įvesties srovės tipas: trifazis, sukimosi greitis (maks.): 2 850 aps./min, pjovimo aukštis (maks.): 150 mm, bendras svoris: 1 650 kg, skyriaus ilgis (min.): 3 mm, dalies ilgis (maks.): 4 000 mm, pjūklo disko greitis: 2 850 aps./min, įėjimo įtampa: 400 V, pjūklo pavara: 7 500 W, pjovimo skersmuo: 270 mm, pjūklų disko skylė: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction Unit MG 3 Lhjdey Dtpmspfx Akvjh ST Fully Automatic Circular Saw PROFILMA 502 Fully automatic operation, drive 7.5 kW, S6, 400 V, 50 Hz, 2850 rpm. Designed for saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm, Siemens S7 control with touch display including piece counter. Including CPU 315 and a Flexisoft, piece quantity multiplier for the processing of material bundles. Cycle time indication in seconds, chain dimension, including reversing device for cut lengths up to max. 4 m. Automatic shut-off via limit switch when workpiece ends, error diagnostics, including IXON router for VPN connectivity, see data sheet. Motorized saw blade feed, infinitely variable, vertical and horizontal clamping devices from bottom to top, infeed and outfeed sides at the saw head, saw kerf extension on both sides of the saw blade, electronic material feed unit with 800 mm feed length, equipped with ball screw spindle and servo motor, including pneumatic horizontal and vertical clamping devices. The profile support area in the feed zone is equipped with a lift/lower roller, minimum remnant from 75 mm (depending on profile), clamping pressure reduction horizontal and vertical with 6 pressure regulators, cycle spray device with fill level monitoring and automatic shut-off, 1-liter lubricant tank, noise protection package, machine frame internally lined with sound absorbing mats. 2 extraction nozzles Ø 100 mm, safety covers above the saw head and feed unit, 740 mm roller conveyor with protective cover on infeed side, 450 mm Pertinax table top with protective cover on outfeed side. Chip Extraction Unit MG 3 Dust and chips are collected in a 172-liter metal container, which can be unlocked for easy emptying. 2 outlets with hose adapters 100 mm, without extraction hose, drive 3.0 kW, 400 V, 50 Hz, three-phase motor. Max. air volume flow 2,600 m³/h, vacuum 30 mbar, with fan snail housing above extractor. Large filter area, pneumatic shaking unit for filter cleaning, filter class M, noise level max. 80 dB(A). Selector switch for continuous operation or saw-controlled operation, no power cable, paint finish: RAL 7035 / 9016.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2011/67/47, pjūklo disko skersmuo: 420 mm, įėjimo įtampa: 400 V, pjūklų disko skylė: 40 mm, įėjimo srovė: 6 A, Siūlome labai gerai išsilaikiusią GRAULE ZS 170 N kampinę ir skersinę pjūklą aliuminiui bei medienai, pagaminta 2011 m. Lhsdpfey D Nkgjx Akvsh

Būklė: naudotas, Gamybos metai: 1996, Usata Formatrici di Cartoni Mondo & Scaglione 376 / C fino a 23 scatole/min Questa formatrice di cartoni non solo forma scatole in cartone tipo "Americana", ma garantisce anche alta efficienza ed affidabilità. Inoltre, sigilla il fondo di ogni scatola con colla a caldo (hot melt) e, soprattutto, ha una produttività fino a 23 scatole al minuto. Pertanto, è ideale per linee di produzione che richiedono alti livelli di precisione e velocità. Magazzino cartoni e sistema di trasporto La macchina è dotata di un magazzino cartoni orizzontale posizionato nella parte posteriore inferiore, ottimizzando così lo spazio e facilitando il caricamento. Il carrello di trasferimento multifunzione preleva, apre e trasferisce i cartoni grazie a un sistema di controllo elettromeccanico. Questo permette un funzionamento preciso e continuo, riducendo sensibilmente i tempi di fermo durante i cambi formato o le regolazioni. Chiusura falde e applicazione colla La formatrice gestisce automaticamente la chiusura delle falde delle scatole: le falde corte inferiori vengono chiuse tramite comando elettropneumatico, mentre le falde lunghe si chiudono durante lo scorrimento del cartone. L’unità per la colla hot melt assicura una sigillatura del fondo affidabile e sicura. Tutto questo avviene in modo completamente automatico, aumentando così l’efficienza e riducendo l’intervento manuale. Sistemi di controllo e sicurezza La presenza dei cartoni nel magazzino e durante il trasferimento è monitorata costantemente tramite sistemi di controllo avanzati. Inoltre, la macchina segnala quando si accumulano troppe scatole in uscita. Tutte le funzioni sono regolabili tramite un'interfaccia touch screen, che semplifica i cambi formato e le regolazioni. L'interfaccia mostra in tempo reale qualsiasi anomalia o problema tecnico, facilitando la manutenzione preventiva. PLC Siemens e sicurezza della Formatrici di Cartoni Mondo & Scaglione 376 / C La Formatrici di Cartoni Mondo & Scaglione 376 / C fino a 23 scatole/min utilizza un PLC Siemens serie S7 per il controllo preciso di tutte le operazioni. Il sistema elettrico opera a bassa tensione, migliorando ulteriormente la sicurezza per l’operatore. La macchina è inoltre dotata di protezioni e dispositivi di sicurezza per rispettare le normative vigenti, garantendo l’uso sicuro anche negli ambienti produttivi più esigenti. Prestazioni e dati tecnici Lhedpsvgvi Aofx Akvsh La macchina lavora da 15 a 23 scatole/min a seconda di formato e dimensioni. Il magazzino cartoni contiene da 100 a 150 cartonati per un funzionamento continuo senza ricariche frequenti. La potenza assorbita è di 1,5 kW più 3,5 kW per il gruppo colla, con ottima efficienza energetica. La pressione di esercizio è di 5 bar, con consumo d’aria compreso tra 80 e 100 l/min, contribuendo ulteriormente all’efficienza globale del sistema.

Būklė: naudotas, Gamybos metai: 2009, Naudotas dėžių formavimo įrenginys Bondani 2009 Naudotas dėžių formavimo įrenginys Bondani 2009 yra Bondani gamybos įranga. Modelio numeris – P CV – 900, pagamintas 2009 metais. Šiuo metu įrenginys yra sandėlyje. Įrenginyje integruotos įvairios saugos funkcijos, užtikrinančios operatorių ir šalia dirbančių asmenų saugumą. Ljdpevgupzjfx Akvshh Įrenginys parduodamas su naudojimo ir priežiūros instrukcijomis. Naudotas dėžių formavimo įrenginys Bondani 2009 – patikimas ir efektyvus sprendimas, tinkantis įvairių projektų vykdymui.

Būklė: naudotas, Gamybos metai: 2005, Gebrauchter Kartonaufrichter Mondo e Scaglione 2005 Lhsdpfsvgumtjx Akvjh Kartonaufrichter mit Heißleimverschluss Horizontale Kartonformung Nordson Leimgerät Möglichkeit zur Formung und zum Verschluss verschiedener Kartonformate Lackierter Stahlrahmen Unfallschutzvorrichtungen Leistung ca. 1.500 Kartons pro Stunde Die Maschine entspricht den CE-Normen, Baujahr 2005, inklusive Betriebsanleitung Gebraucht, in ausgezeichnetem Zustand

Būklė: naudotas, Dvigalvis aliuminio profilių pjovimo staklės – Pertici Univer 403 P Pagrindinės savybės: Dvigalvis pjūklas aliuminio profiliams Skaitmeninis valdymas pjovimo matmenų nustatymui Galvų sukimasis ir pasvirimas Automatinis judančios galvos pozicionavimas Pneumatiniai profilio tvirtinimo spaustuvai Idealiai tinka aliuminio langų ir durų gamybai Lhsdpfozb Ehnjx Akvoh Didžiausias pjovimo ilgis: 3 200 / 3 300 mm Techniniai duomenys: Disko skersmuo: Ø 400 mm Disko skylė: Ø 30 mm Sukimosi greitis: 3 180 aps./min. Įrengta galia: 3,1 kW Maitinimas: 380 V trifazis – 50 Hz Srovės suvartojimas: 6,2 A Darbinis slėgis: 6,3 bar Oro sunaudojimas: 13,9 Nl/ciklas Svoris: 370 kg Pritaikymas: Aliuminio stalių gamyba Durys ir langai Uždangos tipo fasadai Lengvoji metalo konstrukcija

Būklė: geras (naudotas), Maszyna jest w dobrym stanie technicznym. Ledpfx Aeqzypmjkvohh

Būklė: labai geros būklės (naudotas), CTS Type: TSS-70/350-A Water-cooled Refrigeration Unit For sale is a high-quality thermal shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/350-A. This unit is designed for performing thermal shock tests and is typically used in industrial, research, and quality assurance applications. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and cyclic temperature tests Technical Specifications: Type: TSS-70/350-A Temperature Range: - Hot chamber: +50°C to +200°C - Cold chamber: -70°C to +100°C Electrical Data: - Connection: 400 V, 3/N, 50 Hz - Rated power: approx. 20.4 kW - Rated current: approx. 36.5 A Refrigeration System: - Refrigerants: R404A / R23 - Pre-cooling stage: approx. 6.0 kg - Cooling stage: approx. 3.0 kg - Water-cooled Features / Equipment: - CTS control panel with touch display - Microprocessor-controlled regulation and monitoring system - Programmable operation - Digital setpoint and actual value display - 2-zone system (hot and cold chamber) - Automatic carrier for shock tests Technical Design: - Separate hot and cold chambers - Carrier system for rapid temperature change - Test chamber made of stainless steel - Removable shelf / wire rack - Viewing window in the door - Water-cooling connections present - Integrated control cabinet Dimensions: - External (HxWxD): approx. 2450 x 2160 x 2200 mm - Internal (HxWxD): approx. 610 x 850 x 680 mm - Weight: approx. 2500 kg Additional Data: - Protection class: IP 54 Lhedpfey Hkgbex Akveh - Operating overpressure: approx. 25 bar - Test pressure: approx. 27.5 bar For your safety as a buyer, please note the following! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: see pictures (Specifications subject to change and errors excepted!) We are happy to answer any further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used to carry out temperature shock tests and is typically utilized in industry, research, and quality assurance sectors. Application areas: - Material testing - Aging tests - Electronics and component testing - Temperature shock and thermal cycling tests Technical Data: Type: TSS-70/130 Test chamber volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient to +180°C Cooling rate: approx. 4 K/min from ambient to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change speed: - Max. 100 K/min mean for shock test cycles (without heat radiation) Changeover speed: - ≤ 15 min between -65°C and +200°C (with 10 kg ICs) Changeover time: < 10 seconds Electrical Data: Lsdpoy Hkd Hefx Akvjhh Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Rated current: approx. 29 A On-site fuse: 32 A slow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Equipment / Features: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs possible) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external test item control - Fault signal on potential-free contact Load capacity up to 30 V DC, 2 A EMC tested Technical Design: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber / transfer basket made of stainless steel, material no. 1.4301 - Insert rack made of stainless steel wire - Tubing port NW 50 with sealing plug - Compressed air connection 1/4" male thread - Condensate drain, non-pressurized R 1/2" female thread - Safety door locking mechanism - Lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Intake dimensions approx.: 1990 x 940 x 1652 mm Chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Further Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh Important safety information for buyers: The following measures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: see images (Specifications subject to change and error) For further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, 1 used, very well-maintained fully hydraulic cold circular saw automatic machine with flat vertical guides Max. saw blade diameter: 325 mm Cutting range 90°: - Round: 100 mm - Square: 85 x 85 mm - Rectangular (flat): 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single feed: up to max. 550 mm Multiple cut feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2,150 x 1,450 x 1,950 mm Weight: approx. 650 kg Accessories / Special features: • Fully hydraulic design • Fully automatic operation, single cuts also possible Ledpfx Akey E Uk Ievehh • Clamping feed system • 90° cutting angle • Continuously variable speed range 20 - 100 rpm • Length adjustment via programming on the control panel • Speed and feed can be continuously adjusted during operation on the operator panel • Single and multiple feed • Flat vertical guides, adjustable • Coolant system • Micro-spray unit • 1 used saw blade included • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Būklė: paruoštas naudoti (naudotas), frezavimo staklės PVC ir aliuminio stulpams Lsdpfoyn Nabox Akvjhh