Mabeg Rb 70 pirkti naudotą (14 836)

Būklė: labai geros būklės (naudotas), CTS Type: TSS-70/130 Water-cooled chiller unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The unit is designed for performing temperature shock tests and is typically used in industrial, research, and quality assurance applications. Fields of application: - Material testing - Aging tests - Electronics and component testing - Temperature shock and thermal cycling tests Technical specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock testing, without radiant heat Changeover rate: - ≤ 15 min in the range from -65°C to +200°C with 10 kg ICs Transfer time: - < 10 seconds Electrical data: - Connection: 400 V, 3/N, 50 Hz - Rated power: approx. 16.7 kW - Rated current: approx. 26.8 A - Required site fuse: 32 A slow-blow - Connection: Cekon 32 Refrigeration system: - Refrigerant: R404A / R23 - Water-cooled, low noise, fully hermetic Equipment / Features: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation - Up to 100 test programs possible - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for customer-specific test item control - Fault alarm via potential-free contact Load up to 30 V DC, 2 A - EMC tested Technical design: - Hot and cold chambers - Loading basket with spindle drive - Test chamber / basket made of stainless steel, material no. 1.4301 - Insert basket made of stainless steel wire - Pipe duct NW 50 with sealing plug - Compressed air connection 1/4" male thread - Non-pressurized condensate drain R 1/2" female thread - Safety door lock - Lockable door with window Dimensions according to set-up sketch: - External dimensions approx.: 2335 x 940 x 1820 mm - Insertion dimensions approx.: 1990 x 940 x 1652 mm - Test chamber dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm - Window: 300 x 300 mm Further data: - Protection class: IP 22 - Sound pressure level: < 60 dB(A) - Weight: approx. 950 kg - Average consumption per test cycle: approx. 8 kWh For your safety as a buyer – Please note the following: The following points are carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate Blsdpfx Afoy Hkfde Aeg 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: see images (Specifications and technical data subject to change and error!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality temperature shock test chamber from CTS (Clima Temperatur Systeme), model TSS-70/130. The device is used to carry out temperature shock tests and is typically utilized in industry, research, and quality assurance sectors. Application areas: - Material testing - Aging tests - Electronics and component testing - Temperature shock and thermal cycling tests Technical Data: Type: TSS-70/130 Test chamber volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient to +180°C Cooling rate: approx. 4 K/min from ambient to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change speed: - Max. 100 K/min mean for shock test cycles (without heat radiation) Changeover speed: - ≤ 15 min between -65°C and +200°C (with 10 kg ICs) Changeover time: < 10 seconds Electrical Data: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Rated current: approx. 29 A On-site fuse: 32 A slow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Equipment / Features: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Program operation (up to 100 test programs possible) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external test item control - Fault signal on potential-free contact Load capacity up to 30 V DC, 2 A EMC tested Technical Design: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber / transfer basket made of stainless steel, material no. 1.4301 - Insert rack made of stainless steel wire - Tubing port NW 50 with sealing plug - Compressed air connection 1/4" male thread - Condensate drain, non-pressurized R 1/2" female thread - Safety door locking mechanism - Lockable door with window Dimensions according to installation diagram: External dimensions approx.: 2335 x 940 x 1820 mm Intake dimensions approx.: 1990 x 940 x 1652 mm Chamber dimensions: Height approx. 410 mm, Width approx. 480 mm, Depth approx. 660 mm Window: 300 x 300 mm Bedpfx Asy Hkd Hjf Aslg Further Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average power consumption per test cycle: approx. 8 kWh Important safety information for buyers: The following measures are carried out on all chambers we offer prior to sale: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certification 4. After successful checks, the chambers undergo a documented test run. Condition: used Scope of delivery: see images (Specifications subject to change and error) For further questions, please feel free to contact us by phone.

Būklė: labai geros būklės (naudotas), CTS Climate Test Chamber Model: CS-70/1000-5 Water-cooled condenser Year of manufacture: 08/2018 For sale is a high-quality climate and temperature test chamber from CTS (Clima Temperatur Systeme), model CS-70/1000-5. This unit is designed for simulating a wide range of environmental conditions and is typically used in industry, research, and quality assurance. It enables precise testing under extreme temperature and humidity conditions, for example: - Material testing - Aging tests - Electronics and component testing - Climate and environmental simulations Thanks to its large test space (1,000 liters) and high-performance control technology, both rapid temperature changes and constant long-term tests can be carried out. The unit is water-cooled, ensuring stable and efficient operation. Technical Data: Model: CS-70/1000-5 Test chamber volume: approx. 1,000 liters Control system: Multi-touch controller with integrated program creator Programmable test sequences Side pipe/cable feedthroughs: Bjdpfxsy Hkc Ao Af Ajlg 1× feedthrough NW 50 1× feedthrough NW 125 Temperature range: –70 °C to +180 °C Rate of temperature change: up to 5 K/min Temperature consistency: ± 0.3 K Climatic data (humidity): Humidity range: 10% to 98% rH Dew point range: –10 °C to +94 °C Dimensions: External (H×W×D): approx. 1950 × 1270 × 2245 mm Internal (H×W×D): approx. 900 × 1000 × 1100 mm Electrical data: Connection: 400 V / 3/N / 50 Hz Power: 17.6 kW Rated current: 28.5 A Refrigeration system: R452A – 5.1 kg – GWP 2140 R23 – 2.1 kg – GWP 14800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Protection class: IP 22 Weight: approx. 900 kg Important safety information for you as the buyer: The following steps are carried out on all our chambers in advance: 1. Functional test and replacement of necessary components 2. Refilling with legally compliant refrigerant as required 3. Leak test with certificate 4. Documented trial run Condition: used Device is shown completely in the pictures. Display: STOP / Manual operation Scope of delivery: CTS climate test chamber CS-70/1000-5 Scope of delivery as shown in the images Inspection possible by arrangement. Loading by forklift can be organized. (Specifications and technical data subject to change and errors!) For further questions, we will be happy to assist you by phone.

Būklė: labai geros būklės (naudotas), ESPEC Climate Test Chamber Type: ARS-0680-AE ESPEC Climate Test Chamber / Environmental Simulation Chamber Change rate: up to approx. 5 K/min Model ARS-0680-AE Year of manufacture: 2018 For sale is a high-quality ESPEC climate test chamber for precise temperature and humidity testing in research, development, quality assurance, and industry. The unit is in used condition and can be inspected in full as shown in the images. The current display shows STOP / ready for operation. Operating hours according to display: approx. 6,950 h. Technical Data Model: ARS-0680-AE Test chamber volume: approx. 680 litres Temperature range (typical ARS series): approx. -70 °C to +180 °C Humidity operation: available Change rate: up to approx. 5 K/min Internal dimensions (W x H x D): 850 × 1000 × 800 mm External dimensions (W x H x D): 1050 × 1955 × 1805 mm Electrical connection: AC 400 V / 3~ / 50 Hz Max. current consumption: 27 A Weight: approx. 615 kg Year of manufacture: 2018 Cooling: air-cooled (no external water connection required) Refrigerants according to nameplate: R452A – 2.3 kg – GWP 2141 R23 – 0.65 kg – GWP 14800 Equipment / Features Touchscreen control panel Programmable and constant operation Observation window in the door Stainless steel test chamber Interior lighting / chamber lamp Side pipe and cable ports Ethernet interface Specimen temperature input Power supply control for specimen Bjdpey Hkb Sefx Af Ajlg Time signal outputs Water tank system for humidity operation Movable version / on castors Weight: approx. 615 kg For your security as a buyer, the following information! The following actions are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful check, the chambers undergo a documented test run. Scope of delivery ESPEC climate test chamber ARS-0680-AE including available documentation Scope of delivery as shown in the images Condition & notes Condition: used Viewing possible by appointment. Loading by forklift can be arranged. (Subject to change, prior sale, and errors in the technical data!) If you have any questions, we are happy to assist you.

Būklė: labai geros būklės (naudotas), CTS Blodpfx Afsy Hkblj Aog Model: CS-70/600-5 Climate Test Chamber CTS CS-70/600-5 Water-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS climate test chamber, model CS-70/600-5, suitable for precise temperature, climate, and stress screening tests in research, development, quality assurance, and industrial applications. The unit is in used condition and is fully visible as per the photos. Current display: Manual operation / Stop. Operating hours as per display: Technical data: Temperature range: -70°C to +180°C Humidity range: 10% to 98% r.h. Dew point range: -10°C to +94°C Test chamber volume: 600 liters Temperature change rate according to IEC 60068-3-5: Heating: 6.0 K/min Cooling: 7.0 K/min Electrical connection: 400 V 3/N 50 Hz Rated power: 14.6 kW Rated current: 22.0 A Protection class: IP 22 Refrigerant: R404A / R23 Pre-cooling stage: R404A – 4.5 kg Cooling stage: R23 – 2.1 kg / 14.5 bar CO2-equivalent: 17.65 t / 31.08 t GWP: 3922 / 14800 Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Specifications: Observation window in door Stainless steel test chamber LED chamber lighting CTS LCD control panel with digital controller Specimen protection / temperature limiter Water-cooled refrigeration unit Automatic water make-up / DI water inlet Chamber and condensate drain Volt-free contact Digital outputs RS232 interface Ethernet interface Side pipe entries Pipe connections according to installation plan: 1x entry NW 50 2x entries NW 125 Test chamber dimensions as per installation plan: approx. 850 x 850 x 830 mm External dimensions as per installation plan: approx. 1900 x 1120 x 1875 mm Weight / mass as per documentation: approx. 750 kg Scope of delivery: CTS climate test chamber CS-70/600-5 including available documentation / inspection certificates Scope of delivery as shown in the photos For your security as buyer: The unit can be inspected by arrangement. Loading by forklift can be arranged. Please feel free to contact us if you have any questions. For your security as a buyer, please note the following information! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, recharge with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used (Subject to change and error in technical data and specifications!) We will gladly answer further questions by phone.

Būklė: labai geros būklės (naudotas), CTS Model: C-70/600 Environmental Test Chamber CTS C-70/600 Water-cooled version with observation window, specimen protection, and documentation For sale is a high-quality CTS environmental test chamber, model C-70/600, suitable for precise temperature and climatic testing in research, development, quality assurance, and industrial applications. The unit is in used condition and is fully visible as shown in the pictures. The current display shows manual operation / stop status, Bodpfxoy Hkazj Af Aolg actual temperature 16.59 °C, setpoint 5.00 °C, actual humidity 39.7 % r.h., and actual water reservoir 11.0 l. Technical specifications: Temperature range: -70 °C to +180 °C Humidity range: 10 % to 98 % r.h. Dew point range: -10 °C to +94 °C Test chamber volume: 600 liters Electrical connection: 400 V 3/N 50 Hz Nominal power: 8.7 kW Nominal current: 14.8 A Protection class: IP 22 Refrigerants: R404A (precooling stage) / R23 (cooling stage) Cascade refrigeration system for low-temperature operation down to -70 °C Operating overpressure PS: 25 bar Test pressure PT: 27.5 bar Features / Equipment: Observation window in the door Stainless steel test chamber CTS control panel with digital actual/setpoint display Specimen protection / temperature limiter Water connection / demineralized water inlet Chamber and condensate drain Cable ports on the side of the test chamber RS232 interface as per documentation Digital outputs for specimen actuation Test chamber dimensions as per documentation: approx. 850 x 850 x 830 mm External dimensions as per documentation: approx. 1900 x 1115 x 1850 mm Weight as per documentation: approx. 600 kg Scope of delivery: CTS environmental test chamber C-70/600 including existing documentation / operating manuals Scope of delivery as shown in the pictures For your safety as a buyer: The unit can be inspected by appointment. Forklift loading can be arranged. Important safety information for you as a buyer! The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, new fill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used (Specifications subject to change and errors excepted!) We are happy to answer further questions by phone.

Būklė: naudotas, Gamybos metai: 2016, veikimo valandos: 1 091 h, keliamoji galia: 8 000 kg, kėlimo aukštis: 4 750 mm, kuro tipas: dyzelinas, statybinis aukštis: 2 750 mm, pavaros tipas: automatinis, Įranga: kabina,

Būklė: naudotas, Gamybos metai: 2017, veikimo valandos: 792 h, keliamoji galia: 8 000 kg, kėlimo aukštis: 3 300 mm, kuro tipas: dyzelinas, statybinis aukštis: 2 750 mm, pavaros tipas: automatinis, Įranga: kabina,

Būklė: geras (naudotas), Dantračių freza, modulio freza, abvalcinė freza, dantų profilio freza, modulio frezavimo galvutė, volinė briaunų freza, volinė freza, freza, abvalcinė freza, pleištinių velenų abvalcinė freza, krumpliaračių abvalcinė freza, užkabinamo danties abvalcinė freza, dantračių lentos freza -Gamintojas: Reinecker, abvalcinė freza 2 vnt -Tipas: Mod.3 Ø 70 mm / Ø 67 mm KHSS-E -Tvirtinimas: Ø 27 mm Bjdpfx Afoy D Nkmj Aslg -Kaina/pristatymas: pilnas komplektas -Transportavimo matmenys: 135/70/H70 mm -Svoris: 2,1 kg

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2009, veikimo valandos: 9 310 h, keliamoji galia: 3 000 kg, kėlimo aukštis: 4 620 mm, laisvas kėlimas: 150 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, statybinis aukštis: 2 975 mm, šakių ilgis: 1 200 mm, pavaros tipas: Diesel, Dyzelinis krautuvas Stiebo tipas: Standartinis Būklė: Paruoštas naudoti ir visiškai veikiantis Techninė būklė: normali Priekinės padangos tipas: superelastinės Galinės padangos tipas: superelastinės Šoninis stumtuvas, šakių reguliavimo įrenginys, Bjdpfx Afsy Iicqs Aelg 3-ias vožtuvas, 4-as vožtuvas, šildymas, pilna kabina,

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2009, veikimo valandos: 1 328 h, keliamoji galia: 1 600 kg, kėlimo aukštis: 4 470 mm, laisvas kėlimas: 1 380 mm, kuro tipas: dyzelinas, stiebo tipas: triplex, statybinis aukštis: 1 980 mm, šakių ilgis: 1 200 mm, tuščias svoris: 2 880 kg, pavaros tipas: Diesel, Dyzelinis krautuvas Stiebo tipas: Triplex Būklė: Paruoštas darbui ir visiškai veikiantis Techninė būklė: gera Padangos priekyje: superelastinės Padangos gale: superelastinės Blsdjy Iickopfx Af Ajg Šoninis poslinkis, 3-iasis vožtuvas, šildymas, pilna kabina,

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, X ašies eiga: 750 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 520 mm, valdiklių gamintojas: SIEMENS, veleno greitis (maks.): 24 000 aps./min, ašies variklio galia: 35 000 W, ašių skaičius: 5, Šis 5 ašių DMG DECKEL MAHO DMU 70 EVO Linear buvo pagamintas 2009 m. Jo darbinė sritis - 750 mm X ašies eiga, 600 mm Y ašies eiga ir 520 mm Z ašies eiga. Staklėse įrengtas greitaeigis suklys, galintis pasiekti 24 000 apsukų per minutę, ir 120 pozicijų įrankių žurnalas. Joje yra DMG PH 150 L8 automatika. Jei ieškote aukštos kokybės apdirbimo galimybių, apsvarstykite mūsų parduodamas DMG DECKEL MAHO DMU 70 EVO linijines stakles. Susisiekite su mumis dėl išsamesnės informacijos. • Padavimo greičiai: linijinis 20 000 mm/min; greitasis skersinis 50 000 mm/min Blsdpfx Afsymcvms Aeg • Stalas: prispaudimo paviršius 700 × 500 mm • Įrankių dėtuvė: 120 pozicijų • Aušinimo skystis per visą špindelį: aukšto slėgio 40 barų • Dokumentai: instrukcijos ir CE deklaracija Papildoma įranga • Aušinimo skysčio bakas su popieriniu filtru, 600 l • Matavimo zondas • Medienos drožlių transporteris • Elektroninis rankinis ratukas (nuotolinis) • Padėklų keitimo sistema DMG PH 150 L8, 8 stotelės (padėklai neįskaičiuoti) Technical Specification Taper Size HSK 63

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2021, veikimo valandos: 4 171 h, keliamoji galia: 2 500 kg, kėlimo aukštis: 3 680 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, statybinis aukštis: 2 480 mm, šakių ilgis: 1 200 mm, pavaros tipas: Diesel, Dyzelinis krautuvas Stiebo tipas: standartinis Pavarų dėžė: automatinė Būklė: atnaujintas be garantijos Techninė būklė: labai gera Priekinės padangos tipas: superelastinės Priekinės padangos būklė: 60–80% Galinės padangos tipas: superelastinės Galinės padangos būklė: 40–60% Aprašymas: Kaina nurodyta su nauju UVV patikrinimu, nauju dažymu ir oro kondicionieriaus priežiūra. Mielai galime suorganizuoti ekonomišką transportavimą. Galima išperkamoji nuoma! Esame oficialus Jungheinrich partneris. Šoninis poslinkis, Blodpfsy Dwfxsx Af Aog 3-iasis vožtuvas, darbiniai žibintai gale, darbiniai žibintai priekyje, šildymas, STVZO, pilna kabina, oro kondicionierius, CE sertifikatas, Mini svirtelės,

Būklė: naudotas, Gamybos metai: 2022, keliamoji galia: 5 000 kg, kėlimo aukštis: 7 270 mm, bendras ilgis: 5 670 mm, - Load capacity: 4,999 kg - Load center: 500 mm Blodjy E Uikopfx Af Ajg - Load distance: 540 mm - Axle load with load, front: 10,468 kg - Axle load without load, front/rear: 2,956/3,635 kg - Front tire size: 355/45-15 - Rear tire size: 250-15 - Number of wheels front/rear: 2x/2 - Track width: front, single tires: 1,210 mm - Track width: front, dual tires: 1,364 mm - Rear track width: 1,120 mm - Mast/carriage tilt, forward/backward: 3/7 degrees - Seat height: 1,298 mm - Coupling height: 496 mm - Fork carriage: Category 3 / Form A - Aisle width with pallet 1000 x 1200 crosswise: 4,470 mm - Aisle width with pallet 800 x 1200 lengthwise: 4,670 mm - Turning radius: 2,730 mm - Smallest turning point distance: 746 mm - Travel speed with/without load: 20/20 km/h - Lifting speed with/without load at minimum fan speed: 0.50/0.53 m/s - Lowering speed with/without load: 0.50/0.50 m/s - Gradeability with/without load: />30% - Service brake: mechanical - Engine manufacturer/type: Deutz/TCD 2.9 L4 - Rated speed: 2,200 rpm - Max. torque: 260 Nm - Number of cylinders/displacement: 4/2,900 cm³ - Working pressure for attachments: 250 bar - Oil flow for attachments: 30 l/min - Towing coupling: pin

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 203129, spaudimo jėga: 400 kN, varžto skersmuo: 18 mm, darbinio tūrio: 23 cm³, Here we are offering the following well-maintained, pre-owned injection moulding machine as part of our business specialised in used injection moulding machinery. Of course, we also purchase well-maintained injection moulding machines with a year of manufacture from 2010 onwards. We have been a wholesale dealer for injection moulding machines for over 25 years. Manufacturer: Arburg Model: 270C 400-70 Control unit: Selogica Year of manufacture: 2007 Operating hours: 89,470 h, screw and barrel replaced Machine number: 203129 Extras: - Robot interface - Highly wear-resistant screw - CF drive - Complete documentation and software (on CF card) - Diverter valve This machine is equipped with retrofitted interfaces for: - Mould temperature control - Heating channel - Colour dosing/colouring (Siemens Logo PLC control) German language - From first ownership – origin Germany Regular maintenance by the manufacturer and previous owner. Clamping unit: Clamping force: 400 kN / 40 t Tie bar distance: 270 x 270 mm Mounting platens: 446 x 446 mm Opening stroke: 350 mm Minimum mould height: 200 mm Max. daylight between platens: 550 mm Ejector stroke: 125 mm Ejector force: max. 30 kN Injection unit: Bsdpfx Asx Rvcief Ajlg Screw diameter: 18 mm Injection volume: 23 cm³ Shot weight: 21 g Injection pressure: 2,500 bar Electrical: Pump: 11 kW Heating: 4 zones, 4 kW Installed load: 15 kW Pre-fuse: 50A Weight: 2,150 kg Warranty: Warranty up to initial commissioning Loading / Shipping: Loaded free on truck provided by buyer, or free delivery within Germany (freight at cost), ex-stock Hannover, Germany. Please note in regard to our offered machines and company: - We only sell machines purchased directly from ongoing production, ex our warehouse in Hannover - All offered machines are inspected and tested prior to dismantling - We do NOT deal in insolvency assets and are NOT brokers trading in third-party property - All machines come from successful businesses where regular maintenance is a given - All machines offered are available for inspection at our warehouse

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, veikimo valandos: 1 254 h, mašinos/transporto priemonės numeris: 50803583844694, keliamoji galia: 272 kg, bendras svoris: 21 090 kg, gaminio plotis (maks.): 2 490 mm, darbinio aukščio: 43 150 mm, variklio tipas: dyzelinis, gamintojas: Genie Bljdpfx Asw Snzfof Ajg

Gamybos metai: 2025, būklė: naujas, New Machine Year of manufacture: 2025 Features and technical data: Complete in standard configuration with: - Robust, torsion-resistant steel frame, manufactured as a welded and bolted structure - Top lamellar pressure beam with 6 elements, side lamellar pressure beam with 5 elements - Lamellar pressure beams with field-proven tolerance compensation (Ganner system) for tightly clamped carcass joints - Counterpressure surfaces (side pressure wall, base) made from 38 mm thick, coated, continuous support panels - Continuous pressing area with a height of 95 mm at the lower vertical pressure beam - Electromotive adjustment of the two pressure beams via precision trapezoidal threaded spindles (with enhanced lead and runout accuracy) and high-performance slide nuts with grease reservoir - Pressing is performed electromotively, using 2 separate worm gear motors (2 x 0.75 kW each) - The pressure force of the beams can be steplessly adjusted electronically with 2 potentiometers and is regulated via frequency converters, ensuring completely wear-free pressure control - Pressing force for horizontal pressure beam: min. 500 daN (kg) up to stepless max. 2200 daN (kg) Blsdpfsw Nafkjx Af Asg - Pressing force for vertical pressure beam: min. 300 daN (kg) up to stepless max. 2200 daN (kg) - Pressing and adjustment speed of the pressure beams with fine positioning, selectable via 3-step switch: 5 / 10 / 25 mm/sec - Jog function for precise positioning of both pressure beams, e.g., for low pressing forces, drawers, and carcasses at 45° - Simple operation via 6 separate push buttons; 8 movement cycles can be selected via control panel - Freely adjustable press time preselection 0–30 min (switchable to seconds or hours) with individually programmable opening dimensions of the two pressure beams - Re-press function to increase or decrease pressing force during the pressing process - Working height/loading height: 300 mm - Working dimensions: Length min. 150 mm, max. 2500 mm; Height min. 150 mm, max. 1400 mm; Depth: 700 mm Including surcharge for rapid traverse speed for fast positioning of the pressure beams, controlled via automatic workpiece detection with sensors in the pressure beams. Press speed: 5 / 10 / 25 mm/sec and rapid traverse speed: 50 mm/sec. Sensors can be disabled for pressing special components. Including set of machine feet for 500 mm working height Location: Flörsheim Availability: Short-term

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Automatinis tekinimo staklės Genini TBK 70 Išeinantis kvadratas: 45×140 mm (apie 10 vnt./min – 600 vnt./val., su 2 šiurkščiais apdirbimo įrankiais – 1 apdailos įrankis) Didžiausias apdirbamas ruošinys: 70×70 mm Mažiausias apdirbamas ruošinys: 20×20 mm Didžiausias apdirbimo ilgis: 300 mm Mažiausias darbinis ilgis: 25 mm CE ženklinimas Blodpfx Afjyxqc Hs Asg

Būklė: naujas, didžiausias leistinas svoris: 28 950 kg, bendras svoris: 36 000 kg, ašių konfigūracija: 3 ašys, krovimo vietos ilgis: 11 600 mm, krovinių skyriaus plotis: 2 480 mm, krovos erdvės aukštis: 2 450 mm, krovinio erdvės tūris: 70 m³, bendras plotis: 2 550 mm, bendras aukštis: 3 800 mm, Gamybos metai: 2026, Įranga: ABS,

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2014, kuro tipas: dyzelinas, Krautuvė Still RX70 - 25 / Dyzelinas Pagaminimo metai: 2014 UVV: 03 / 2027 Statybinis aukštis: 2,67 m Kėlimo aukštis: 4,25 m Šakių ilgis: 1,2 m Bljdey Hp Hmspfx Af Ajg Suodžių filtro - Eberspächer Pilna kabina Šoninis stumtuvas Šakių reguliavimas

Būklė: naudotas, rida: 352 753 km, galia: 240 kW (326,31 AG), pirmoji registracija: 05/2007, bendras svoris: 18 000 kg, kuro tipas: dyzelinas, spalva: oranžinė, ašių konfigūracija: 4x2, didžiausias leistinas svoris: 7 150 kg, tuščias svoris: 10 850 kg, kita apžiūra (TÜV): 06/2025, ratų bazė: 3 200 mm, stabdžiai: variklio stabdymas, vairuotojo kabina: dieninė kabina, pavaros tipas: automatinis, emisijos klasė: Euro 4, pakaba: plienas-oras, sėdimų vietų skaičius: 2, Įranga: ABS, borto kompiuteris, diferencialo užraktas, kabina, oro kondicionavimas, priešrūkiniai žibintai, statymo jutikliai, suodžių filtras, sėdynės šildytuvas, trauki kontrolė, vairo stiprintuvas,

Būklė: naudotas, Naudota mašina Naudota eilinė gręžimo mašina Ganner RB 107 Serijos Nr.: 121627 Variklio galia: 1,5 kW Variklio apsukos: 2800 aps./min. 1 gręžimo balkis su 26 velenomis, ašių atstumas 32 mm Bedsw I Unwopfx Af Ajlg 3 prispaudėjai 1 kojinis jungiklis Prieinamumas: greitai Vieta: Röllbach

Gamybos metai: 2021, veikimo valandos: 4 748 h, būklė: labai geros būklės (naudotas), Weiss Temperature Test Chamber TempEvent T/1000/70e/5, water-cooled, 1000 liters, year of manufacture 2021, operating hours 4979.69 h For sale is a pre-owned temperature test chamber from Weiss Technik. This test chamber is used for testing components and materials under various temperature conditions (e.g. cold, heat, aging). Explanation of the designation: T = Temperature test chamber 1000 = approx. 1000 liters volume 70 = low temperature range (-70°C) e = energy-optimized version 5 = temperature change rate (series) Equipment: Stainless steel interior Recirculation fans Touch control (WEBSeason) Viewing window Automatic / manual temperature control Technical data: Model: TempEvent T/1000/70e/5 Internal volume: approx. 1000 liters Temperature range: approx. -70°C to +180°C Temperature change rate: Cooling approx. 6 K/min Heating approx. 8 K/min External dimensions: approx. 2000 x 1415 x 2030 mm (HxWxD) Internal dimensions: approx. 950 x 1100 x 950 mm (HxWxD) Connection: 400 V / 50 Hz / 3~ Nominal current: approx. 34 A Power: approx. 21 kW Refrigerants: R449A / R23 Weight: approx. 1200 kg Important safety information for you as the buyer: The following procedures are carried out in advance on our offered chambers: 1. Functional inspection and replacement of necessary components Bledpjy El Ttefx Af Ajg 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see pictures) (Technical data subject to changes and errors!) We are happy to answer any further questions by phone.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2006, Vamzdžio skersmuo (maks.): 120 mm, Vamzdžio ilgis (maks.): 3 000 mm, Vamzdžio sienelės storis (maks.): 6 mm, lenkimo spindulys (maks.): 200 mm, lenkimo spindulys (min.): 10 mm, bendras svoris: 12 500 kg, bendras ilgis: 5 000 mm, bendras plotis: 2 200 mm, galia: 12 kW (16,32 AG), Vamzdžių lenkimo staklės MEWAG - RB 120 A-Digi MACH-ID 9605 Gamintojas: MEWAG Tipas: RB 120 A-Digi Pagaminimo metai: 2006 Didžiausias gaminio skersmuo: 120 mm Mažiausias gaminio skersmuo: 10 mm Didžiausias sienelės storis: 6 mm Didžiausias lenkimo spindulys: 200 mm Mažiausias lenkimo spindulys: 10 mm Didžiausias lenkimo ilgis: 3000 mm 3D lenkimas: taip Bsdoy E Hu Eepfx Af Aslg Galia: 12 kW Įrankių kiekis: 8 Ilgis: 5000 mm Plotis: 2200 mm Aukštis: 1 mm Svoris: 12 500 kg Atkreipkite dėmesį: Šiame puslapyje pateikta informacija buvo surinkta pagal mūsų geriausias žinias ir galimybes, taip pat gamintojo duomenimis. Informaciją pateikiame sąžiningai, tačiau už jos tikslumą negalime garantuoti. Todėl jie nėra laikomi oficialiais pasiūlymais ar sutarties sąlygomis. Rekomenduojame patikrinti visą svarbią informaciją.

Būklė: geras (naudotas), Ištekiniai grąžtai, spiraliniai grąžtai, grąžtai - Gamintojas: Maysso / Unisto / Hartner / Stock, 6 vnt. spiraliniai grąžtai Ø 51 - 70 mm - Tipas: dviejų briaunų, MK5 kotas su plokščiu grąžto galu - Dydis/vnt.: žr. nuotrauką ir sąrašą - Kaina/pardavimas: tik pilnas komplektas - Pagal užklausą: iš papildomų sandėlio likučių galima pasirinkti įvairių dydžių/ kiekių - Transportavimo matmenys: 345/270/H100 mm - Svoris: 23,7 kg Bedjy A Inuopfx Af Aslg