Horizontalus Juosta pirkti naudotą (11 435)

Būklė: naudotas, Techninės detalės: Nledpfx Ahjy Dc N Ascog Maksimalus pjovimo skersmuo: 260 mm Pjovimo juostos ilgis: 4310 mm Pjovimo juostos plotis: 27 mm Pjovimo diapazonas esant 90 laipsnių kampui: apvalus: 260 mm Pjovimo diapazonas esant 90 laipsnių kampui: kvadratinis: 400 mm Juostos greitis: 17–110 m/min. Elektros prijungimas: 400/50 V / Hz. Bendrasis energijos poreikis: 4 kW Apytikslis mašinos svoris: 1,22 kg Apytikslės mašinos matmenys (ilgis x plotis x aukštis): 2,4 x 1,0 x 2,0 m Matmenys (ilgis x plotis x aukštis): 3,0 x 0,4 x 0,8 m SBA 260/400 U = visiškai automatinis automatinis pjovimo procesas automatinis išsijungimas po pjovimo įvairūs priedai (pjovimo ašmenys) ir ritininė sistema *

Būklė: naujas, Model designation Njdpfx Asl Sva Iohcslg SHARK 331-1 NC 5.0 SPIDER

Būklė: naujas, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total connected load: 1.5 kW Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL OFFER PRICE!!! Double-mitre metal bandsaw, frequency inverter, hydraulic semi-automatic, type GBS 250 Super HA-I Easy • Mitre cuts: left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast as a single piece – very quiet operation with minimal vibrations • Hydraulic vise, laterally adjustable Nlodpfx Aefgyh Uehcog • Guided, high-quality industrial bearings • Heavy-duty vise and machine base casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball bearing turntable Semi-automatic operation sequence: 1. Clamp the material 2. Saw start 3. Rapid downfeed to material start, or cut immediately for serial cutting 4. Switch off saw band 5. Raise the frame to just above the material 6. Open the vise

Būklė: naujas, Condition: new Delivery time: approx. 4 months from order Country of origin: Turkey Price: €32,000 Lease rate: €611.20 Saw frame with double column guide Saw blade dimensions: 5000 x 34 x 1.1 mm Infinitely variable blade speed: 20 – 120 m/min Cutting capacity 0° round: 330 mm Cutting capacity 0° square: 330 mm Cutting capacity 0° flat: 350 x 330 mm Working height: 845 mm Hydraulic motor: 1.1 kW Main motor: 3 kW Coolant pump motor: 0.12 kW Length: 2815 mm Width: 1935 mm Nljdowiq Hgopfx Ahcjg Height: 1855 mm Weight: 2,560 kg Servo feed with 700 mm stroke Cutting length up to 9,999 mm (multiple index feeds) Omron touchscreen, storage for 50 different cutting lengths and 30 programs Linear guide 41 mm saw band Control panel Hydraulic vice Hydromechanical blade tension Gearbox designed for heavy-duty applications Coolant system Sensitive pressure adjustment Inverter for stepless blade speed control Chip brush Optical height setting Chip conveyor Operating manual in GERMAN or ENGLISH OPTIONS: Roller conveyors and saw blades available on request

Būklė: naujas, Cutting diameter: 250 mm Saw band length: 2950 x 27 x 0.9 mm Table height: approx. 800 mm Band speed: 36/72 m/min Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.37 t MEP Sawing Machine: - Saw frame, vise assembly, and base constructed from highly durable cast iron - Precision angle indicator on the cast iron structure - Electrical system (with fully identifiable wiring and 24V low voltage system) - IP 55 control lever for manual cycles (if applicable) - Rotating chip brush for cleaning the saw band - Quick-approach vise closure assembly - Accurate end stops with settings for miter cuts at 0°, 45°, and 60° to the left - Bi-metal saw blade, 2950 x 27 x 0.9 mm Nljdpfx Ahofg E H Iecjg - Tools, operating instructions, and spare parts order manual provided in user’s language SHARK 281 – manual operation model; SHARK 281 CCS – manual operation with automatic cutting via gravity head-feed. CCS (Cut Control System) with: A) Switch for manual/automatic cutting mode B) Adjustable cutting speed C) Hydraulic brake with tank D) End-stop for band shutoff CCS is also available as an option for previously manufactured machines. Vise with quick adjustment Hydraulic indicator for band tension Electric coolant pump for band cooling and lubrication, with accessible coolant tray above the machine base On models with pneumatic vise (MA), the vise is opened and closed via a manual valve (pedal control available as an option)

Būklė: naujas, Cutting diameter round: 230 mm Cutting diameter square: 230 x 230 mm Saw band length: 2950 x 27 x 0.9 mm Band speed: 15 – 100 m/min Total power requirement: 2.2 kW Machine weight: approx. 1.2 t SHARK 230-1 NC HS 5.0, electrohydraulic double-column fully automatic band saw with semi-automatic function for 0° cuts in structural steel, stainless steel, alloyed steels, solid and profile material, with a maximum remnant length of 60 mm. - Maximum cross-section: 230 x 230 mm. - Numerically controlled band saw machine with the new Windows “CE” based platform, specially developed by MEP for automatic operation. FEATURES: Nljdofg E Hyjpfx Ahcsg - User interface with 7” touchscreen display and mechanical keys for machine operation functions, ensuring reliable, simple, and intuitive operation as well as real-time control of all cutting parameters. - Safety enclosure complies with the latest safety regulations in accordance with Machinery Directive EN 13898/2007. - New fieldbus communication system with dual microprocessor and serial connection. - Sturdy cast iron (G25) frame to compensate for vibrations, improve machine stability, and protect the saw blade.

Būklė: naujas, Cutting diameter: 300 mm Saw band length: 3320 x 27 x 0.9 mm Cutting width: 300 mm Control: NC Cutting capacity at 90° – flat: 330 x 260 mm Cutting capacity at 90° – square: 260 x 260 mm Cutting capacity at 45° – square: 250 mm Cutting capacity at 45° – flat: 270 x 200 mm Cutting capacity at 60° – round: 180 mm Cutting capacity at 60° – square: 170 mm Band speed: 15 – 100 m/min Total power requirement: 2.2 kW Machine weight approx. 1.1 t Space requirement approx. 3.3 x 2.83 x 2.23 m Nlodpofg E H Ejfx Ahcjg Equipment/features: - Electrohydraulic fully automatic band saw with additional semi-automatic, semi-automatic dynamic, and manual operation modes - Automatic cycle (cuts from 0° to 60° to the left) - Semi-automatic, semi-automatic dynamic, and manual cycle (cuts from 45° right to 60° left) - Manual or semi-automatic dynamic cycle allows cuts outside of series production to be made directly without programming - Numerically controlled band saw with new, specially developed Windows CE-based control system from MEP for automatic machines - User interface with 7" touchscreen display and mechanical buttons for machine operation functions - Infinitely variable cutting speed adjustment from 15 to 100 m/min via frequency inverter (VFD) - Material feed with stepper motor via ball screw spindle – mounted on opposing ball bearings; single stroke 600 mm - Repeatable strokes for cutting any length - Automatic monitoring of cutting force via a servo valve mounted directly on the cylinder - Coolant tray integrated in the machine base - Swarf removal brush - Bimetal band saw blade for solid and profile material - Tool kit and user manual with spare parts list

Būklė: naudotas, Gamybos metai: 2005, Pjovimo skersmuo 1000 mm Juostinio pjūklo ilgis: . mm Pjovimo plotis: . mm Pagrindinis pavaros variklis: . kW Pjovimo sritis 1000x1000 mm Bendras energijos poreikis: . KVA Apytikslis įrenginio svoris: . t Volelinis konvejeris – pasirinktinai Techniniai duomenys yra pateikti gamintojo arba naudotojo ir todėl mums nėra įpareigojantys. Pasiliekame teisę tarpiniam pardavimui; galioja tik mūsų bendrosios verslo ir pardavimo sąlygos. Apie mus Daugiau nei 400 nuosavų įrenginių sandėlyje daugiau nei 15 000 m² sandėlio ploto, krano keliamoji galia 70 t daugiau nei 10 000 detalių Jūsų dirbtuvėms Njdpfx Aezfwugohcjlg Jei norite parduoti mašinas, gamybos linijas ar savo įmonę, susisiekite su mumis. Daugiau pasiūlymų rasite mūsų svetainėje. Apžiūra galima iš anksto susitarus. Laukiame Jūsų apsilankymo, Jūsų Markus Hirsch komanda

Būklė: naujas, Cutting range round 0°: 150 mm Cutting range square 0°: 150 x 150 mm Cutting range flat 0°: 150 x 165 mm Cutting range round 45°: 115 mm Cutting range flat 45°: 115 x 130 mm Cutting range round 60°: 60 mm Cutting range flat 60°: 70 x 70 mm Working height: 700 mm Saw blade dimensions: 1735 x 13 x 0.65 mm Cutting speeds: 40 – 80 m/min Motor power: 0.75 kW Voltage: 400 V Machine dimensions: 1200 x 750 x 1250 mm Weight approx.: 85 kg Features: - Saw bow swivels up to 60° - Equipped with 2 blade speeds for optimal adjustment to the workpiece - Ideal for machining pipes, profiles and solid material made of stainless steel, iron, etc. - Generously dimensioned saw arm for low-vibration operation - Saw arm lowering via hydraulic downfeed cylinder - Low-noise operation thanks to robust design - Automatic shut-off at end of cut via microswitch - Quick-release vice for easy and fast clamping of the workpiece - Precise, adjustable blade guides for optimal cutting results - Incl. base frame Scope of delivery: - Bi-metal saw blade 1735 x 13 x 0.65 mm, 6/10 TPI - Quick-release vice Nsdpfxoilk E Dj Ahcjlg - Material stop - Hydraulic downfeed cylinder - Motor protection switch - Automatic shut-off at end of cut - Base frame

Būklė: naudotas, Gamybos metai: 1996, Pjovimo skersmuo: 460 mm Pjovimo juostos ilgis: 8350 x 41 x 1,3 mm Pjovimo plotis: 1660 mm Bendroji galia: 30 kW Mašinos svoris: apie 21 900 kg Norėdami gauti išsamią informaciją apie techninius duomenis, rekomenduojame atlikti apžiūrą vietoje. KASTO BBS 460/1660 2 identiškos mašinos (tokios pat nuotraukos, kita mašina pagaminta 1996 m.) Gamintojas: KASTO Maschinenbau GmbH & Co. KG Adresas: Industriestr. 14, D-77856 Achern-Gamshurst Tipas: BBS 460/1660 (juostinis stalas / blokinis juostinis pjūklas) Serija: 101 Mašinos Nr.: 6319 101 004 Pagaminimo metai: 1996 MATMENYS IR SVORIS Svoris: 21 900 kg (duomenų kortelė) / apie 17 700 kg (fundamento planas) Medžiagos atramų aukštis: 1550 mm Mašinos užimamas plotas (ilgis x plotis x aukštis): apie 1,24 × 3,28 × 3,49 m Minimalus plotas su priedais/opcijomis: apie 20,19 × 10,67 × 3,95 m Pjovimo plotas (esant 90° kampui) Apvalios medžiagos: Ø 460 mm Plokščios / blokinės medžiagos: 1660 × 460 mm PJOVIMO JUOSTA Ritinio apkrova: 20 000 kg Standartiniai dydžiai: 8350 × 54 × 1,3 mm arba 8350 × 41 × 1,3 mm Alternatyva (pagal duomenų kortelę): 8350 × 54 × 1,3 mm Dantų plotis: apie 2,4 mm Veikiančios dalys: 3 × Ø 350 mm Rekomenduojama kokybė: aukščiausios kokybės bimetalinės pjovimo juostos (M 42) anglies plienui, aukšto legiravimo įrankių plienui ir nerūdijančiam plienui Ypač kietoms medžiagoms: kietliejinio plieno juostos GALIOS DUOMENYS Juostinio pjūklo greitis: be pakopų reguliuojamas 14–75 m/min Pašaravimas (žingsninis pašaravimas): be pakopų reguliuojamas 0,7–220 m/min Elektrinis prijungimas: 400 V / 50 Hz / 30 kW (bendroji galia) Aušinimo skysčio kiekis: 6,5 l Triukšmo lygis: 73 dB(A) Funkcija | Gamintojas | Tipas | Galia (kW) / Srovė (A) | Sūkių skaičius (aps./min.) ---|---|---|---|--- Pjovimo variklis | Sieber | VM6-1054/750/4 | 7,5 kW / 15,6 A | 1500 Hidraulinis variklis | BauKnecht | DT90-S4F | 1,1 kW / 3,0 A | 1500 HIDRAULINIS AGREGATAS | Rexroth | UL 205S2016294/1 | 2,2 kW / 5,6 A | 1500 Valco variklis | SEW | KG 35 | 1,2/4,8 kW / 4,6/10 A | 750/3000 Nominalus greitis | SEW | KE66 DT 80 N 612 | 0,12/0,48 kW / 0,69/1,32 A | 750/3000 Nlsdpfxszmy Sqo Ahcsg Greitasis judėjimas | SEW | KE66 DT 80 N 612 | 0,12/0,48 kW / 0,69/1,32 A | 750/3000 Reguliavimo variklis | Sieber | DE26,18 kW / 0,6 A | 3000 Aušinimo skysčio siurblys | Brinkmann | TS12/190-65 | 0,27 kW / 0,63 A | 3000 Aušinimo skysčio siurblys | Brinkmann | TB 100/270 | 0,24 kW / 0,44 A | 3000 Skiedrų šalinimo siurblys | Huber + Moser | 693/8F | 0,08 kW / 0,65 A | 750 Pjovimo juostos padavimo įtaisas | SEW | SA 42 DT 71 DB | 0,12 kW / 0,69 A | 750

Būklė: naujas, Robust double-mitre metal band saw for professional use in metalworking and container construction, featuring hydraulic lowering of the saw frame. Cutting capacity: Round 0°: 355 mm Square 0°: 300 x 300 mm Flat 0°: 490 x 300 mm Round 45°: 350 mm Square 45°: 290 x 290 mm Flat 45°: 340 x 290 mm Round 60°: 230 mm Square 60°: 180 x 180 mm Flat 60°: 220 x 180 mm Cutting speed: 35 / 70 m/min Saw blade: 3770 x 34 x 1.1 mm Working height approx.: 870 mm Coolant pump: 100 W Saw motor: 1.9 kW Connection: 400 V Dimensions (LxWxH) approx.: 2200 x 1400 x 1500 mm Weight approx.: 625 kg Features: - Double-mitre saw with pivoting saw bow from left -45° to right +60° - Ideal for machining pipes, profiles, and solid materials made of stainless steel, steel, etc. in industrial applications - Large, cast saw arm for low-vibration operation - 2 blade speeds for optimal adaptation to the workpiece - Hydraulic lowering cylinder Nodpfjw Hxckjx Ahcslg - Automatic vice opening after cut completion - Quick-release vice for simple and fast workpiece clamping - Precise, adjustable blade guides for optimal cutting results - CE/IEC compliant, German documentation and service Scope of delivery: - Bi-metal saw blade 3770 x 34 x 1.1 mm - Blade tension adjustable via manometer - Carbide blade guides - Quick-release vice - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch - Automatic shut-off after end of cut - Base frame

Būklė: naujas, Fastech Horizontal Double Miter Semi-Automatic Bandsaw BMSY 440 DGH Round cutting capacity: 440 mm Flat cutting capacity: 610 x 440 mm Square cutting capacity: 440 mm +30° round cutting capacity: 400 mm +30° flat cutting capacity: 500 x 440 mm +30° square cutting capacity: 440 mm +45° round cutting capacity: 440 mm +45° flat cutting capacity: 410 x 440 mm +45° square cutting capacity: 410 mm +60° round cutting capacity: 320 mm +60° flat cutting capacity: 250 x 440 mm +60° square cutting capacity: 250 mm -30° round cutting capacity: 440 mm -30° flat cutting capacity: 500 x 440 mm -30° square cutting capacity: 410 mm -45° round cutting capacity: 410 mm -45° flat cutting capacity: 410 x 440 mm -45° square cutting capacity: 410 mm -60° round cutting capacity: 320 mm -60° flat cutting capacity: 285 x 440 mm -60° square cutting capacity: 285 mm Main drive motor power: 3 kW Hydraulic pump power: 0.55 kW Coolant pump motor power: 0.12 kW Infinitely variable blade speed: 20 – 100 m/min Saw blade dimensions: 5200 x 34 x 1.1 mm Table height: 860 mm Weight: 1540 kg Length / Depth / Height: 2800 / 1210 / 1870 mm Njdpfxjhpil Es Ahcslg Double miter bandsaw Infinitely variable blade speed Hydraulic vise with sensitive cutting pressure regulation Heavy-duty gearbox Hydromechanical saw blade tensioning Saw blade cleaning brush Digital miter angle display

Būklė: naudotas, Gamybos metai: 1985, Pjovimo skersmuo 1300 mm Juostos pjūklo juostos ilgis 11880 mm Pjovimo plotis 1,6 mm Pagrindinis variklis 11 kW Stalo plotas 2300x1200 mm Pjovimo zona 1300x1300 mm Bendras energijos poreikis 16 KVA Mašinos svoris apie 17,75 t Pilnai automatinis juostinis pjūklas Pjūklas 52 Techniniai duomenys pateikti pagal gamintojo arba naudotojo informaciją, todėl mes neprisiimame atsakomybės už jų tikslumą. Pasiliekame teisę parduoti įrangą kitam pirkėjui be išankstinio įspėjimo; galioja tik mūsų bendrosios prekybos ir pardavimo sąlygos. Apie mus Daugiau kaip 400 nuosavų mašinų sandėlyje Nljdezfqhtopfx Ahceg daugiau nei 15.000 m² sandėliavimo plotas, krano keliamoji galia 70 t daugiau nei 10.000 priedų jūsų dirbtuvėms Jei norite parduoti mašinas, gamybos linijas ar visą įmonę, susisiekite su mumis. Daugiau pasiūlymų rasite mūsų svetainėje. Apsilankymas galimas iš anksto susitarus. Laukiame jūsų apsilankymo. Jūsų Markus Hirsch komanda

Būklė: naujas, Cutting capacity at 90°: round 510 mm Cutting capacity at 90°: square 450 mm Cutting capacity at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Nlodpfed Iipmjx Ahceg Saw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight: approx. 2.1 t Space requirement: approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I • 2-column miter saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth operation due to inclined cutting, feed rate and cutting pressure control • Heavy-duty material infeed roller • Removable chip tray (for easy cleaning) • Energy-efficient and low-vibration operation through inclined cutting • Ergonomic, safe, and freestanding control panel • Frequency-controlled saw drive 15 - 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vise • LEDs for monitoring all safety functions • Large-diameter flywheels (520 mm) • Clear mitre adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid downfeed to start of material or cut immediately for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vise opens

Būklė: naujas, Cutting diameter: 280 mm Cutting capacity at 90 degrees, flat: 380 x 260 mm Cutting capacity at 90 degrees, square: 260 x 260 mm Speed range: 40 / 80 m/min Nedsfg E Iaspfx Ahcjlg Saw blade dimensions: 3440 x 27 x 0.9 mm Motor power: 1.5 / 1.8 kW Weight: 670 kg Electrohydraulic, semi-automatic bandsaw with additional manual and semi-automatic dynamic modes, suitable for cuts from 45° right to 60° left. Key features: - Swivelling control panel mounted on a vertical post. - 420 mm large rotary table on roller bearings with preloaded thrust bearing and interchangeable steel inserts. - Dual blade speed (40/80 m/min.).

Būklė: naujas, Gamybos metai: 2025, Cutting range round: 420 mm Cutting range square (W x H): 420 x 420 mm Smallest cuttable size: 10 x 10 mm Clamping range: 0 - 420 mm Bundle cutting range (min. W x H – max. W x H): 160 x 130 – 260 x 160 mm Shortest length of cut piece: 5 mm Shortest remnant length in automatic operation*: 190 mm Shortest remnant length in single cut: 20 mm Length: 2220 mm Width incl. chip conveyor: 3050 mm Height: 2100 mm Material support height: 860 mm Machine weight approx.: 2850 kg Total connected load: 9.5 kW Saw motor power: 7.5 kW Hydraulic motor power: 1.5 kW Infinitely variable cutting speed: 20 – 80 m/min Saw feed speed: 1 – 300 mm/min Automatic material feed length, single stroke: 500 mm Automatic material feed length, multiple stroke: 9999 mm Saw blade dimensions: 5150 x 41 x 1.3 mm Nedpfewqchxex Ahcolg Standard equipment CE-certified Saw MasterCE electrical safety Permanent magnet synchronous motor Saw frame anti-collision detection LED work light HMI + buttons Frequency inverter Hydraulic blade tensioning Vice differential pressure valves Automatic chip conveyor (spiral) Vice pressure regulator Motorized chip brush Cooling fan for hydraulics Roller work table Hydraulic feed Main drive precision gearbox Segmented vice clamping 40 L chip collection container Toolbox (wire brush, leveling pads, touch-up paint) One-piece saw band Optional equipment UL electrical safety Laser line projection Saw blade break detection Saw depth control Deviation detector Hydraulic blade guide tensioning Upper clamp Servo feed Moveable guide arm, hydraulically clamped Moveable chip collection container 70 L

Būklė: naudotas, Gamybos metai: 1985, Pjovimo skersmuo 1300 mm Juostos pjūklo juostos ilgis 11880 mm Nedpfxezfqg No Ahcolg Pjovimo plotis 1,6 mm Pagrindinio variklio galia 11 kW Stalo paviršius 2500x1300 mm Pjovimo sritis 1300x1300 mm Bendras energijos poreikis 16 KVA Mašinos svoris apie 17,75 t Pilnai automatinis juostinis pjūklas Pjūklas 54 Techniniai duomenys pateikiami gamintojo arba savininko ir nėra mums įpareigojantys. Tarpinio pardavimo teisę pasiliekame; galioja tik mūsų verslo ir prekybos sąlygos. Apie mus Daugiau nei 400 nuosavų mašinų sandėlyje Daugiau nei 15 000 m² sandėliavimo plotas, krano talpa 70 t Daugiau nei 10 000 prekių priedų Jūsų dirbtuvėms Jei norite parduoti mašinas, gamybos linijas ar savo įmonę, prašome susisiekti su mumis. Daugiau pasiūlymų rasite mūsų svetainėje. Apžiūra galima pagal susitarimą. Laukiame Jūsų apsilankymo. Jūsų Markus Hirsch komanda

Būklė: naujas, Cutting diameter: 550 mm Saw band length: 6850 x 41 mm Cutting width: 1.3 mm Control system: Semi-automatic Cutting range – square: 550 x 550 mm Cutting range – flat: 550 x 700 mm Total power requirement: 4 kW / 1580 Nm kW Machine weight approx.: 3,775 kg Space requirement approx.: 1850 x 1500 x 3450 mm The KLS 550 x 700 is a semi-automatic, column-guided horizontal bandsaw. Standard features: - Chip brush - Hydraulic blade guide - Hydraulic vice - Hydraulic blade tensioning - Blade breakage switch - Stop system - Automatic ball screw lubrication - LED lighting - Swarf conveyor - Chip transport - 1400 mm feed drive - Double roller table - Material end detector - Program memory system - USB port output - PLC control & touchscreen - Frequency inverter Optional features: Nedpsymf S Dsfx Ahcslg - Laser line - Oil mist lubrication - V-shaped vice - Additional double roller table - Upper clamping system - Sensor for identifying profile cutting The images are for illustration purposes only and do not constitute a true-to-scale representation of the machine.

Būklė: naujas, Pjovimo skersmuo 650 mm Juostinio pjūklo ilgis 7730 x 54 mm Pjūklo plotis 1,3 mm Valdymas pusiau automatinis Pjovimo sritis – kvadratinė 650 x 650 mm Pjovimo sritis – plokščia 650 x 750 mm Bendra galingumo poreikis 5,5 kW / 750 Nm Staklių svoris apie 4550 kg Reikalinga vieta apie 2100 x 1550 x 3900 mm KSY 650 x 1050 yra pusiau automatinės, kolonų kreipikliais vedamos horizontalios juostinės pjovimo staklės. Be to, staklės turi motorizuotą ritininį stalą, kuris priekyje ir gale yra po 2 metrus ilgio. Papildomos specifikacijos: - Motorizuota ritininio stalo sistema - Lazerinė linija - Papildomas dvigubas ritininis stalas - PLC ekranas Njdpfxeyk Ih As Ahcolg - Anti-vibracinė sistema Nuotraukos yra tik informacinio pobūdžio ir neatitinka tikslaus staklių mastelio.

Būklė: naujas, Cutting diameter: 255 mm Saw blade length: 2765 x 0.9 x 27 mm Cutting width: 300 x 180 mm Speed: 35 + 70 rpm Total power requirement: 1.8 kW Machine weight approx. 450 kg Space requirement approx. 1.7 x 1.23 x 1.75 m SPECIAL OFFER PRICE!!! Double-mitre metal band saw, frequency inverter, hydraulic semi-automatic GBS 250 Nljdpfx Asfn Andohcsg Super HA-I Easy • Mitre cuts: left 60° and right 45° • Material height sensor (automatic cut start detection) • Monoblock frame and gearbox for extremely quiet and low-vibration operation • Hydraulic vice, laterally adjustable • Precision industrial bearings • Heavy-duty vice and machine castings • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Feed pressure regulator • Support roller (material infeed side) • Ball-bearing mounted rotating table Semi-automatic function: 1. Clamp material 2. Start saw 3. Rapid descent to beginning of the material or, for serial cutting, cut immediately 4. Stop saw blade 5. Raise frame just above the material 6. Open vice

Būklė: naujas, Pjovimo skersmuo 235 mm Pjūklo juostos matmenys 2645 x 27 x 0,9 mm Pjovimo plotis 280 x 190 mm Pjovimo greitis 45/90 m/min Pjovimo našumas 60° - apvalus 120 mm Pjovimo našumas 60° - kvadratas 120 mm Pjovimo našumas 45° - apvalus 190 mm Pjovimo našumas 45° - kvadratas 170 mm Prijungimo įtampa 400 V Bendras galios poreikis 1,1 kW Mašinos svoris apie 290 kg Matmenys I x P x A 1,2 x 0,8 x 1,2 m Dvigubo kampo juostinis pjūklas -Kampiniai pjūviai iki 60° kairėje ir 45° dešinėje -Spaustukas su greito užveržimo įtaisu -Juostos įtempimo kontrolė -Elektrinis aušinimo automatas Nlsdpfx Ahjp Scqyscsg

Būklė: naujas, Cutting range round 0°: 127 mm Cutting range flat 0°: 125 x 130 mm Cutting range round 45° right: 90 mm Cutting range square 45° right: 90 x 90 mm Cutting range round 60° right: 45 mm Cutting range square 60° right: 45 x 45 mm Vice opening: 130 mm Saw blade dimensions: 1440 x 13 x 0.65 mm Cutting speed: 60 m / min Motor power: 0.55 kW Nlsdpfx Ahjilk Ekocog Voltage: 230 V Approx. weight: 25 kg Features: - Saw bow swivels up to 60° - Ideal for cutting pipes, profiles, and solid materials made of stainless steel, iron, etc. - Sturdy saw arm ensures low-vibration operation - Low-noise thanks to solid construction - Automatic shut-off after cutting via micro switch - Quick-action vice for easy and fast workpiece clamping - Precision-adjustable blade guide for optimal cutting results - Environmentally friendly, as no lubricants or coolant are required - Ideal for onsite use due to low weight - Optional base available (not included in scope of delivery) Equipment: - Saw blade 1440 x 13 x 0.65 mm - Material stop - Ergonomic handle Base frame available at extra cost: 129 euros net (special price)

Gamybos metai: 2021, būklė: naujas, Fastech Horizontal Bandsaw Fully Automatic BMSO 350 GA Cutting capacity (round) mm: 350 Cutting capacity (rectangular) mm: 400 x 350 Cutting capacity (square) mm: 350 x 350 +30° Round cutting range mm: 320 +30° Flat cutting range mm: 400 x 350 +30° Square cutting range mm: 350 +45° Round cutting range mm: 320 +45° Flat cutting range mm: 290 x 300 +45° Square cutting range mm: 290 x 290 Main drive motor power kW: 2.2 Hydraulic pump power kW: 0.37 Coolant pump power kW: 0.12 Infinitely variable blade speed mm/min: 20-100 Nedpfjg Ekt Njx Ahcslg Saw band dimensions mm: 4160x34x1.1 Working height mm: 760 Weight kg: 1050 Length mm: 2450 Depth mm: 920 Height mm: 2020 Roller conveyor 1200 mm Infinitely variable blade speed Hydraulic vice Heavy-duty gearbox Hydromechanical saw band tension Saw band cleaning brush Control panel

Būklė: naudotas, Technical details: Cutting diameter: 260 mm Saw band length: 2925 mm Saw band width: 0.9 mm Cutting range at 90 degrees, round: 270 mm Cutting range at 90 degrees, flat: 350 x 240 mm Cutting speed: 35/72 m/min Height above floor: 1,050 mm Total power requirement: 1.9 kW Machine weight approx.: 660 kg Machine dimensions approx. (LxWxH): 1.2 x 0.75 x 1.05 m Bandsaw - Semi-automatic Heavy-duty industrial bandsaw with roller conveyor Nlodpfsv T Tcmjx Ahceg Mitre cuts possible Hydraulic workpiece clamping as per specification.

Būklė: naudotas, Gamybos metai: 1986, Cutting diameter: 460 mm Saw band length: 5,334 mm Cutting width: 1.3 mm Nljdpstqqrfsfx Ahcjg Cutting area (square): 320 x 320 mm Cutting area (flat): 500 x 320 mm Control: minipos 807 Cutting speed: 16 - 80 m/min Saw band dimensions: 5,334 x 41 x 1.3 mm Feed length: 580 mm Multiple feed length: 5,800 mm Total power requirement: 8 kW Machine weight: approx. 3.5 t Machine dimensions (L x W x H): 2.7 x 2.95 x 2.15 m Accessories: roller conveyor 4,150 mm long, roller conveyor 2,150 mm long, bundle clamping device, chip conveyor, coolant system