Eyan Chamfering pirkti naudotą (394)

Būklė: naudotas, Gamybos metai: 1980, Pressure 200 t Bending length 3000 mm Frame gap 2560 mm Installation height 450 mm Duodpst Hllpsfx Ahrew Throat depth 450 mm Stroke adjustment 240 mm Horn length beyond outer frame each 175 mm Table length 3050 mm Table width 280 mm Table height above floor 820 mm Electrical configuration - Voltage/Frequency 220/50 V/Hz Control system CYBELEC, DNC60 Stroke 250 mm Operating pressure 150 bar Machine weight approx. 15 t Space requirement approx. L: 4.0 x W: 3.2 x H: 3.44 m Hydraulic press brake, new control system in 2005 - CYBELEC DNC 60, lower beam extends 500 mm into the floor, machine constructed with I-beam frame, prism and upper beam with 3000 mm length,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, Spaudimas: 400 t Lenkimo ilgis: 6100 mm Atstumas tarp stulpelių: 5050 mm Eiga: 600 mm Atstumas tarp stalo ir slankiklio: 870 mm Iškyša: 600 mm Stalo plotis: 300 mm Dusdpfx Aeu N Iy Nohrsw Uždarymo greitis: 100 mm/sek. Darbo greitis: 11 mm/sek. Grįžimo greitis: 120 mm/sek. Bendras galios poreikis: 37 kW Mašinos svoris apie 65 t Reikalinga erdvė apie 8520 x 8550 x 5325 mm Ši LVD lankstymo staklės yra labai geros, kaip naujos būklės ir iš karto prieinamos.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2015, veikimo valandos: 25 917 h, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: elektrinis, valdiklių gamintojas: Siemens, valdiklio modelis: Sinumeriek, lazeri tipas: CO₂ lazeris, lazero valandos: 5 917 h, lazerio galia: 3 000 W, Vamzdžio skersmuo (maks.): 240 mm, Vamzdžio ilgis (maks.): 6 500 mm, BLM Adige LT8 (pagaminta 2015 m.) – galingas ir universalus CO₂ vamzdžių lazerinio pjovimo įrenginys iš BLM Group, visiškai veikiantis ir labai geros būklės. Pilnai sukomplektuotas su visomis opcijomis ir paruoštas tiesioginiam darbui. Specifikacijos: • Gamintojas / modelis: BLM Adige LT8 • Pagaminimo metai: 2015 • Lazerio technologija: CO₂, 3 kW • Profilių matmenys: apvalūs vamzdžiai iki Ø 240 mm, kvadratiniai/stačiakampiai ir atviri profiliai • Pjovimo galvutė: 3D pjovimo galvutė įžambiems pjūviams ir nuožuloms • Įvedimo ilgis: 6,5 metro • Išvedimo ilgis: 6,5 metro (galima prailginti) • Pakrovimo sistema: laipsninė ir paketų krautuvas • Pilnai sukomplektuota, visos opcijos yra Duodpszf H Ntjfx Ahrsw Mašinos veikimo valandos: 25.917 val. Mašinos gamybos valandos: 4.873 val. Lazerio veikimo valandos: 5.917 val. Lazerio gamybos valandos: 2.264 val. Įskaičiuota: visi dokumentai (skaitmeniniu formatu), kelių profilių šablonai, techninis palaikymas ir sertifikuota pirkimo patikra. Papildomai: „rinktis ir naudoti“ perdavimas įskaitant demontavimą, montavimą, mokymus ir programinę įrangą. Taip pat pažangi CAD/CAM programinė įranga, papildoma garantija, išmaniosios gamyklos integracija, mokymai mašinos ir programinės įrangos naudojimui, FastCal skaičiavimo programinė įranga, pagrindo plokštės ir inkaravimas bei transportavimas (įskaitant draudimą). Domina ši mašina, apžiūra ar reikia daugiau informacijos? Susisiekite su LaserService B.V.

Būklė: naujas, galia: 340 kW (462,27 AG), bendras svoris: 32 000 kg, kuro tipas: dyzelinas, spalva: balta, ašių konfigūracija: 3 ašys, pavaros tipas: automatinis, krovinių skyriaus plotis: 2 550 mm, krovimo vietos ilgis: 8 900 mm, krovos erdvės aukštis: 2 915 mm, Gamybos metai: 2026, bendras plotis: 2 550 mm, bendras aukštis: 3 520 mm, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), navigacijos sistema, oro kondicionavimas, suodžių filtras,

Būklė: naujas, galia: 340 kW (462,27 AG), bendras svoris: 32 000 kg, kuro tipas: dyzelinas, spalva: balta, ašių konfigūracija: 3 ašys, pavaros tipas: automatinis, krovinių skyriaus plotis: 2 550 mm, krovimo vietos ilgis: 8 900 mm, krovos erdvės aukštis: 2 915 mm, Gamybos metai: 2026, bendras plotis: 2 550 mm, bendras aukštis: 3 520 mm, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), navigacijos sistema, oro kondicionavimas,

Gamybos metai: 2026, būklė: naujas, Suitable for the automatic machining of PCD-tipped cutters, shank tools, disc-shaped tools, and optionally profile tools using the disc-electrical erosion process. Accessories: Dedpoy T It Eefx Ahreuw - Full enclosure - Workpiece holder SK 40 or SK 50 (as desired) - Cooling unit for dielectric fluid - Automatic fire extinguishing system - Measuring probe - Measuring arbor SK50 - Alphanumeric keypad for data management - Software package for peripheral machining of shank and jointing cutters, linear processing in all standard axis directions - Software package for compact and radii profiling cutters in traverse and plunge-cut mode - Software package for profile tools, 4-path program for peripheral electrodes - Software package for circular saws for complete processing of tooth backs and tooth flanks of all common geometries - Automatic central lubrication - 1 short dressing holder - 1 mounting flange for rotary electrodes The machine is brand new! Supplied in original packaging and with the full manufacturer's warranty from Vollmer! Max. cutter external diameter: 250 mm Shank tool diameter: 10 - 100 mm Max. external diameter of disc-shaped tools: 380 mm Max. cutting edge length: 20 mm Max. tangential clearance angle: 6° Radial clearance angle: -15° to +6° Max. clearance angle: 30° Chamfering: automatic, max. 70° X-axis travel: 280 mm Y-axis travel: 280 mm Z-axis travel: 330 mm Workpiece holder spindle taper: SK 50 A-axis rotation range: 360° B-axis swivel range: +/- 30° Max. tool weight: 20 kg Max. rotary electrode diameter: 150 mm Rotary electrode speed: 80 - 1500 rpm Dimensions (L x W x H): 1905 x 2520 x 2430 mm Weight: approx. 3000 kg Electrical connection: 3.4 kW (400 V / 50 Hz) Colour: grey RAL7045 / RAL7047

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, pjovimo plotis (maks.): 450 mm, darbinis ilgis: 16 000 mm, darbinis plotis: 450 mm, Įranga: apsaugos šviesos užtvara, Offered for sale is a well-maintained Hundegger K2 joinery line with planing machine. The system is fully operational and has been serviced several times a year directly by Hundegger. The machine will remain in use until early November and can then be dismantled by the buyer. = Equipment: = Machine type K2-5-450 - Maximum wood length (infeed and outfeed): 16m - RAL 5012 blue paint - Infeed cross conveyor with 6 flat band chain strands, 2.2m, horizontally aligned - Extendable outfeed for timber Dodpjzb I Iwjfx Ahrsuw - Under-table swivel cross-cut saw - Universal 5-axis milling unit UFS (with roller cutter, finger joint cutter, dovetail cutter) - Combined vertical tool support (finger joint cutter, 2.2kW drilling unit) - Combined horizontal tool support (2 x 2.2kW drilling unit) - Front marking device - Six-arm outfeed table - Hydraulic beam turnover station - Upgraded timber support surfaces (The susceptible plastic coating has been replaced with maintenance-free stainless steel, chromium-plated tables, stainless steel rollers) - 10m extension roller conveyor with feed roller - Transfer cross conveyor, 7 strands, 3.5m with flat band chain - Integration with planing machine HMD = Planing Machine HM-D - Fully automatic four-sided planing and chamfering - 7kW planing motors - Automatic thickness adjustment - Direct planing control - Planer is directly integrated after the joinery line = Miscellaneous - Inspection possible anytime by appointment. - For joined timber, observation during operation is possible by arrangement. - A new K2 with planing machine and similar equipment costs approximately €800,000. - Spare parts currently in stock can be supplied at attractive prices. - Machine is running perfectly, however, no guarantee or liability is assumed for future damages. - Ideal system for medium to large carpentry firms or sawmills. = Contact - Friedrich Hirsch GmbH - Schwaig 2, 3351 Weistrach, Lower Austria - Managing Director and Owner: Friedrich Hirsch - For inquiries, please call Monday to Friday from 7:00 to 12:00 and from 13:00 to 17:00, or email at any time. - Unfortunately, I cannot provide a mobile number as the listing would otherwise be blocked.

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding craft workshops. The F 5 ensures comprehensive edge processing at all stages, as it comes equipped with all the components required for your needs: pre-milling unit, end trimming saw, milling unit, radius scraping blade, corner rounding unit, surface scraper, and cleaning station. For even greater flexibility towards a perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper blade. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and glue application tailored to the workpiece for edge materials up to 3 mm; pre-milling unit (including DIA tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change pot preparation including glue drain feature, HF end trimming station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and indexable insert cutter (combination version), corner rounding cutter, radius scraper, surface scraper (including pneumatic lift), cleaning station, robust chain feed, ball-bearing mounted double pressure roller, viewing window from machine rear, extendable workpiece support, feed rate approx. 10 m/min. F5/08/4 Quick-change preparation corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper blade (R1/R2) F5/24/1 Spray unit for separating agent F5/24/2 Spray unit for cleaning agent F5/25. Edge spraying unit F5/27. Nesting for milling and radius scraper F5/30. Pneumatic 3-point adjustment (radius, bevel, and flush milling) Dedpfx Ahslht Hwjrsuw Location: Ex stock 54634 Bitburg - Available in week 4 -

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Bernardo FM 45 V Drilling and Milling Machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to its standard quill feed. The dovetail guide for the gearbox head ensures the highest level of precision and stability. Drilling capacity in steel: 32 mm Drilling capacity in cast iron: 40 mm Throat: 260 mm Spindle speed: (12) 50 – 2520 rpm Spindle taper: MT 4 Quill travel: 120 mm Quill feed (3): 0.12 / 0.19 / 0.26 mm/rev Table size: 820 x 240 mm Spindle-to-table distance: 40 – 485 mm Travel (X / Y): 550 / 190 mm Milling head vertical adjustment: 400 mm T-slot size: 14 mm T-slot spacing: 55 mm Motor output S1 100%: 0.85 / 1.1 kW (400 V) Motor input S6 40%: 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H): 1150 x 850 x 1450 mm Weight approx.: 285 kg Features: - Equipped as standard with automatic quill feed and threading device - Wide speed range 50 – 2520 rpm (12 steps) - Dovetail guideways for the X, Y and Z axes, adjustable via gib strips - Versatile applications: slot milling, face milling, boring, etc. - Robust, large cross table with precision ground surface - Milling: quill feed via handwheel - Drilling: quill feed via handwheel - High-quality aluminium motor designed for continuous operation - Rigid, vibration-free cast-iron construction - Fast and simple speed changes by shift lever - Swiveling milling head for angle drilling and chamfer milling, etc. Location: ex stock 54634 Bitburg - Available at short notice - Duedpfxjvutw Hs Ahrew

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 2 The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with all the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure workpieces are perfectly prepared for edge banding. Standard features include a jointing unit (up to 2 mm cutting depth), an overhead quick-heating glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be fitted with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Dsdpfx Aji Am U Dshreuw F2 – 10 m/min feed speed Edge Banding Machine F2 next With PLC control (including touchscreen) and glue application specifically calibrated to the workpiece for edge material up to 3 mm; jointing cutter (including DIA tools) for up to 2 mm cutting depth, maintenance-free glue pot with quick-change system including glue drainage device, HF end trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and replaceable profile/flush trimming cutters (combination setup), robust chain feed, double roller pressure unit with ball bearings, viewing window from machine rear, extendable workpiece support, feed rate approx. 10 m/min. F2/10 mobile base F2/30 pneumatic 3-point adjustment (radius, bevel, and flush milling)

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 2 Djdpfx Aslht Hzohrouw The 3.3 m long F 2 is not only cost-effective and space-saving. It also comes equipped with the features you need to process perfect edges right from the start: diamond-tipped jointing cutters ensure your workpieces are optimally prepared for edge banding. The standard configuration includes a jointing unit (up to 2 mm milling depth), top-mounted quick-heating glue pot, end trim saw, and combination milling unit. Optionally, the F 2 can also be fitted with a flat scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Features: F2 - 10 m/min F2 Next Edgebander With PLC control (including touchscreen) and automatic glue application on the workpiece for edge material up to 3 mm; jointing cutter (including diamond tool) up to 2 mm milling depth, maintenance-free glue pot with quick-change setup and glue discharge unit, high-frequency end trimming station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with separate pneumatic height adjustment and interchangeable insert router (combination version), robust chain feed, ball-bearing double roller top pressure, inspection window at the back of the machine, extendable workpiece support, feed rate approx. 10 m/min. F2/10 Chassis F2/30 Pneumatic 3-point adjustment (radius, chamfer, flush trimming)

Būklė: naujas, Gamybos metai: 2024, The Uniq series is the fully-fledged foundation of our range and shares all the features that have established the Kündig edge sanding machine’s reputation in the market as a robust, versatile precision instrument. A key element of its extremely solid construction is the motorized oscillating sanding unit, which offers a maximum oscillation travel of 90 mm and the ability to tilt motor-driven up to 45°. All standard edge processing operations can be performed at up to four sanding stations. Kündig Uniq Edge Sander – Front and Rear Ingenious Design – The Sanding Unit The core of all our edge sanders is the sanding aggregate, which offers a range of intelligent functions and features. Unlike many machines, our sanding belt does not oscillate by tilting the belt rollers. Instead, the entire sanding unit moves up and down. Oscillation stroke and range are set easily at the touch of a button. Thanks to flexible adjustment and the large oscillation travel, sanding belts can be fully utilized across their entire width—without laboriously adjusting the table height. The oscillation mechanism is powered by a separate motor. The sanding aggregate can also be tilted easily using a rotary switch, also motor-driven. The unit can be inclined between 90° and 45°. Thanks to the well-designed swivel mechanism, full oscillation is always available and double-sided sanding is possible—even simultaneously. The differing table heights of the front and rear sanding stations also ensure that the belt is not used at the same height simultaneously. Furthermore, the combination of swivel mechanism and differing table heights ensures that the gap between sanding aggregate and worktable is minimized at every angle setting. Belt change is simple and accomplished in seconds. The Four Sanding Stations 1st Station: "Veneer Side" Duodpfx Aefig Rwjhrsw The front station is designed for precise calibration of materials and operates like a jointer-planer. The infeed fence is adjusted by a rotary knob to set material removal to tenths of a millimeter. Importantly, the fence remains parallel; it does not tilt. Infeed fence, sanding pad, and outfeed fence are always parallel, eliminating the possibility of rounding workpieces. Fine adjustment of the sanding pad for grit compensation or zeroing between fence and pad is possible via handwheel. The heavy-duty worktable on this side is fitted with sliding inserts. 2nd Station: "Solid Wood Side" This station is ideal for sanding flat, angled, beveled, or outwardly curved workpieces. As with the other stations, the entire sanding aggregate oscillates. The belt runs over a graphite surface for cooling across the full width. A mitre fence is also provided on the solid wood side. Included Accessories: - Half-round table - Auxiliary table with sanding rollers Location: In stock at 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2024, Surface Planer Martin T 54 Only with a high-quality surface planer can you truly achieve perfect foundations. The T 54 was developed with precisely this aim in mind. It enables you to dress workpieces easily at the most modern level and safely machine them with four-sided edges. The machine comes standard with a TERSA all-steel cutterblock. The Xplane cutterblock with a pulling cut is available as an optional extra. Chamfering is effortless thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The solid cast iron tables of the T54 provide a stable support, even for large and heavy workpieces. Should you require more support area, both the infeed and outfeed tables can each be extended by 380 mm – of course, these extensions are also made of cast iron. Technical data: Table width: 500 mm Table length: 2840 mm Max. cutting depth: 8 mm Cutterblock: Diameter 125 mm, 5000 rpm, Tersa Z4 Speed: 5000 rpm Motor power: 5.5 kW Fence adjustable up to 45° Auxiliary fence for small workpieces Motorised table adjustment Duedpfepgkmwex Ahrjw Equipment: T 54 T 5462-a Suvamatic T 541-a Tersa cutterblock 4 knives Location: In stock at 54634 Bitburg - Available immediately -

Būklė: naujas, Gamybos metai: 2025, Martin T 54 Surface Planer Only with a high-quality surface planer can you truly achieve perfect foundations. The T54 was designed precisely with this goal in mind. It allows you to joint workpieces easily and accurately at the most modern level, and reliably equip them with precise angled edges. The machine comes standard with a TERSA solid steel cutter block. The Xplane cutter block with shear cut motion is available as an optional feature. Chamfering is effortless, thanks to the user-friendly single-handed adjustment, allowing any angle between 90° and 45° to be set quickly. The robust cast iron tables of the T54 provide a secure support even for large, heavy workpieces. If you require additional table length, both the infeed and outfeed tables can each be extended by 380 mm—also made of cast iron, of course. Technical Data - Table width: 500 mm - Table length: 2840 mm Dodpfx Aspq If Djhrjuw - Maximum cutting depth: 8 mm - Cutter block: diameter 125 mm, 5000 rpm, Tersa Z4 - Speed: 5000 rpm - Motor power: 5.5 kW - Fence adjustable up to 45° - Auxiliary fence for small workpieces - Electric table adjustment Equipment: - T 54 - T 5462-a Suvamatic - T5406/3-a Xplane solid steel cutter block with 3 spiral knife rows (each row with 26 convex carbide knives; 2 counter-knives), delivered including full knife set and a T-wrench Torx T20; spindle speed 6,000 rpm included. - The emission sound pressure level LpA during operation is reduced by 8 dB(A). Location: ex stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2025, Edge sanding machine with overlying feed unit Dujdpfshqb Rcex Ahrjw What distinguishes the Uniq-S from the Uniq is its feed system, which is integrated into the machine table and features a rubberized feed belt and an overhead pressure beam. This design significantly facilitates the sanding and machining of slanted and beveled edges, as well as the serial sanding of workpieces. It also assists when processing exceptionally large or small parts. The feed speed is infinitely adjustable between 3 and 15 m/min. A soft conveyor belt underneath and rubberized rollers on the overhead pressure beam gently convey the material. An optional second, lower conveyor belt is available. The upper pressure rollers can also be replaced with a rubber belt, which is particularly helpful when sanding extremely small parts. The Uniq-S is recommended as an all-round solution capable of performing all operations – from solid wood to fine veneer edges – with high quality. The infinitely variable feed speed ensures optimum adjustment to the material. 1. Sanding station: “Veneer side” 2. Sanding station: “Solid wood side” 3. Sanding station: “Auxiliary table” 4. Sanding station: “Half-round table” Location: In stock 54634 Bitburg - immediately available -

Būklė: naujas, Gamybos metai: 2025, The Hebrock K 36 Top Equipment with Motorized Adjustment – Showroom Model – New Machine – - Immediately Available - This Hebrock evergreen offers unprecedented possibilities. Developed for the highest demands, the K 36 stands for absolute reliability and productivity in everyday use. With the option to equip the machine with a profile milling unit and a multi-radius scraper, Hebrock sets new standards in perfect edge processing of various edge thicknesses. Max. edge thickness: 3 mm Max. workpiece thickness: 60 mm Ready for operation in 6 min. Technical Data: Max. edge thickness: 3 mm Min/Max. workpiece thickness: 8 – 60 mm Min. workpiece length: approx. 140 mm Feed speed: approx. 15 m/min Ready for operation: approx. 6 min Max. power consumption: Ø approx. 7.4 kW Electrical connection: 400 V – 3 Ph – 50 Hz Working table height: approx. 900 mm Machine dimensions: approx. 5250 x 1230 x 1430 mm (LxWxH) Weight: 1750 kg Features: Dedpfx Aoi Am Ukehrouw • Hebrock K 36 – 15 m/min • K36 Edge Banding Machine • With PLC control (incl. 15" touchscreen), hot-melt adhesive provision directly onto the workpiece for edge materials up to 3 mm; jointing cutter (incl. diamond tool) up to 3 mm milling depth, maintenance-free coated glue pot with quick-change preparation incl. glue discharge device, high-frequency double-motor end trim saw station (approx. 12,000 rpm), high-frequency milling station (approx. 12,000 rpm) with pneumatic adjustment and quick-change insert milling cutter (combination design), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift-out device), buffing station, robust chain drive, double-roller upper pressure with ball bearings, aggregate viewing windows on both machine rear and operator side, signal lamp for workpiece tracking, extendable workpiece support, feed approx. 15 m/min, edge banding on workpieces up to 60 mm thick • 36/08/1 Quick-change corner rounding unit • 36/08/2/1 Additional interchangeable motor for corner rounding unit R=1 • 36/09/1 Multi-radius scraper • 36/24/1 Separator spraying device • 36/24/2 Cleaning agent spraying device • 36/25 Edge protective spray • 36/27 Nesting (1x milling station + 1x radius scraper) • 36/30 Pneumatic 3-point adjustment • 36/30/1 Multitool for HF milling station (R2/R1/chamfer) • 36/45 Axis package for motorized adjustment of panel/edge thickness and jointing depth settings Location: Ex stock 54634 Bitburg - Immediately available -

Būklė: naujas, Gamybos metai: 2025, The Hebrock F 5 If you demand maximum performance, the Hebrock F 5 is the solution for edge banding in demanding woodworking operations. The F 5 ensures comprehensive edge processing in every step, as it comes equipped with all the components necessary to meet your requirements: jointer, end trimming saw, milling unit, radius scraper, corner rounding unit, surface scraper, and buffing station. For even greater flexibility towards achieving the perfect finish, the F 5 can optionally be fitted with a practical multi-radius scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 minutes Equipment: Hebrock F5 Next – 10 m/min Edge banding machine F5 Next With PLC control (including touchscreen) and hot-melt adhesive application onto the workpiece for edging materials up to 3 mm; jointer (including diamond tool) up to 2 mm cutting depth, maintenance-free glue pot with quick-change facility including glue discharge device, HF end trimming saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with separate pneumatic milling adjustment and interchangeable insert cutter (combination version), corner rounding unit, radius scraper, surface scraper (incl. pneumatic lift), buffing station, robust chain feed, double roller top pressure with ball bearings, viewing window from the machine’s rear, extendable workpiece support, feed speed approx. 10 m/min. F5/08/4 Quick-change unit corner rounding unit F5/08/5 Additional interchangeable motor for corner rounding unit with tool assembly F5/09/4 Multi-radius scraper (R1/R2) F5/24/1 Spray unit for release agent F5/24/2 Spray unit for cleaning agent F5/25. Spray unit for edge Dedpfxoi Anadj Ahrsuw F5/27. Nesting for milling and radius scraper F5/30. Pneumatic 3-point adjustment (radius, chamfer, flush milling) Location: ex stock 54634 Bitburg Available calendar weeks: 4/2024

Būklė: naudotas, Holz Her UNO 1303 + PU Briaunos storis: 0,4–3 mm (6 mm) Valdymo pultas su jungikliais agregatų nustatymui Pilnai automatinis briaunų padavimas ritinine ir juostine medžiaga Klijavimo stotis: kasetės + PU klijavimas Ruošinio aukštis: 6–55 mm Spaudimo agregatas – pneumatinis Nupjovimo agregatas ritininei ir juostinei medžiagai iki 3 mm (6 mm) briaunos storio Pjūklo nuolydžio reguliavimas nuo 0 iki 10° Frezuojantis agregatas: lygus frezavimas, spindulinis frezavimas, nuolydžio frezavimas – 15° Briaunų grandymo agregatas nuožuloms ir spinduliams Plokštumos grandymo agregatas – apdaila Mašina PATIKRINTA, PUIKIOS BŪKLĖS, iš labai prižiūrėtos meistrų dirbtuvės Mašina prijungta parodų centre, paruošta demonstracijai Iš sandėlio Lieboch Dsdpfx Ahey Tuylsreuw

Būklė: naudotas, Gamybos metai: 2025, spalva: pilka-juoda, tuščias svoris: 1 kg, kuro tipas: benzinas, pavaros tipas: mechaninis,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Smart Touch CNC control with Sintra HD software Panel height: 10 – 60 mm Solid wood thickness: 22 mm PVC/ABS thickness: 3 mm Feed speed up to 25 m/min Electrically adjustable working height via CNC Motorized panel support guide, electronically adjustable via CNC Anti-adhesive unit Prefeeder unit with 2 motors, adjustable electronically via CNC Coil holder plate for 1 position Gluing unit for EVA hot-melt glue with glue pot End trimming unit with 2 motors and dynamic extraction system following the blades at every movement Offset trimming/chamfering unit with 2 motors, electronically adjustable via CNC Non-stick unit Djdpfx Ahowlbxlorsuw Multifunction corner rounding unit with 2 motors (chamfering + corner rounding) Electronic edge scraper unit, adjustable via CNC Glue scraper unit Brush group “SP-501” Automatic return system with overhead discharge Winner 4A

Būklė: naudotas, Hebrock K34 Briaunos storis iki 8 mm Duodpfewtfvkjx Ahrow SPS ekraninis valdymas su 15" lietimui jautriu ekranu Išankstinio frezavimo agregatas prieš klijavimo mazgą (3 mm) Klijų vonelė su keičiamu rezervuaru ir klijų išleidimo įtaisu Briaunos aukštis maks. 60 mm Pjovimo agregatas Frezavimo agregatas lygiam/radiuso/kampo frezavimui Kampų apvalinimo agregatas (radiusas/kampas) Daugiafunkcinė radiusinė grandyklė (R1/R2) Nestavimas Paviršinė grandyklė Skirtuko purškimo sistema Metai: 2023, 52 darbo val. Staklės NAUJOS, IDEALI BŪKLĖ Iš staliaus dirbtuvių uždarymo / išėjus į pensiją Parduodama iš dirbtuvių

Būklė: geras (naudotas), Gamybos metai: 2003, Funkcionalumas: visiškai funkcionalus, Ott briaunavimo staklės, modelis EUROMATIC- FÜ - Pagaminimo metai: 2003 - BL-F automatinis įleidimo liniuotė su šildymu - FÜ- sujungimo agregatas - KM automatinis briaunų žurnalas - RM-V automatinis rulonų žurnalas - Klijavimas: 0,4 - 15 mm - Briaunos pašildymas - K16- dvigubas agregatas, 15° pasukamas, pjūklų diskai 140x3,2x16 - HF 10.1 tiesioji frezavimo agregatas viršuje ir apačioje su įrankiu - HFF- nuožulnios frezavimo agregatas viršuje ir apačioje su įrankiu - HFR užapvalinimo frezavimo agregatas viršuje ir apačioje su įrankiu Duedoy S Rz Aspfx Ahrjw - AR 4 - 4 varikliai kampų kopijavimo agregatas su įrankiu - ZK- profilio grandymo agregatas su įrankiu - KE-G - briaunų galutinis valymo įrenginys - ZKF - plokštuminio grandymo agregatas su įrankiu Stakles šiuo metu dar galima apžiūrėti ir išbandyti pas klientą.

Būklė: geras (naudotas), Gamybos metai: 2014, Overall dimensions: 12.4 x 18.8 m including safety fencing Number of baskets per furnace: 2x 1,170 x 1,150 x 2,000 mm Reference load weight (net/gross): 1,285 / 2,185 kg Maximum load weight (net/gross): 2,000 / 2,700 kg Load: 2,050 x 1,150 x 2,800 mm, External dimensions: 2,950 x 6,400 x 7,800 mm Maximum temperature: 600°C Operating temperature: 510°C Total heating power: 2 x 81 kW = 162 kW electric Quench water tank: Type = QT-24.16.57/71E Max. bath temperature: 70°C, Tank capacity = 20 m³ 2 tempering furnaces: Type = ADBF-24.16.30/250E External dimensions: 2,800 x 4,850 x 4,000 mm Max. furnace temperature: 250°C Operating temperature: 180°C Total power: 2 x 40.5 kW = 81 kW Duedpey H Ih Ajfx Ahrsw electric loading/unloading track, cooling register by Gea, protective enclosure, safety equipment, plant control system 1,056 annealing baskets with pallet uprights Plant already disassembled, packed, and stored

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Machine description Working width: 230 mm Working height: 130 mm 5 heads + chamfering unit Head arrangement: bottom/right/left/top/bottom Head speed: 6000 rpm Memory system Stepless feed speed adjustment up to 30 m/min Feed via cardan shafts Table lubrication Pneumatic pressure of feed rollers Duodpfx Ahoy N N Ucsrow

Būklė: naudotas, Technical details: Floor-to-table height: 930 mm Machine weight approx.: 75 kg + (27 kg base) Dimensions (L x W x H): 0.6 x 0.48 x 0.43 m EDGE BEVELING MACHINE Application: For beveling Machine table (W x D): 600 x 240 mm with guide rail (L x H): 400 x 25 mm integrated tool: cutter approx. 50 mm with 45° cutting profile bevel width approx. 6 mm Dedpfxou Ngdte Ahreuw Voltage: 380 V with ON/OFF switch