Berg & Schmid X-Tech 410 pirkti naudotą (67 929)

Būklė: labai geros būklės (naudotas), rida: 297 725 km, galia: 300 kW (407,89 AG), pirmoji registracija: 09/2020, kuro tipas: dyzelinas, padangos dydis: 385/55/22.5, ašių konfigūracija: 6x2, kuras: dyzelinas, kuro bako talpa: 750 l, stabdžiai: intarder, spalva: balta, vairuotojo kabina: miegamoji kabina, pavaros tipas: automatinis, pavarų skaičius: 12, emisijos klasė: Euro 6, pakaba: plienas-oras, leistina ašies apkrova (ašis 1): 9 000 kg, leistina ašies apkrova (ašis 2): 12 000 kg, leistina ašies apkrova (ašis 3): 7 400 kg, krovimo vietos ilgis: 6 850 mm, krovinių skyriaus plotis: 2 470 mm, Įranga: ABS, AdBlue, centrinis užraktas, diferencialo užraktas, elektrinis langų reguliavimas, elektriškai reguliuojamas veidrodis, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, priešrūkiniai žibintai, suodžių filtras,

Būklė: naujas, Cutting capacity at 90°: round 255 mm Cutting capacity at 90°: square 240 mm Cutting capacity at 90°: rectangle 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 950 mm Band speed: 18 - 110 m/min Total connected load: 1.5 kW Lhsdpofgyh Uofx Apnon Machine weight approx. 0.42 t Space requirement approx. 1.23 x 1.7 x 1.75 m SPECIAL OFFER PRICE!!! Double-mitre metal bandsaw, frequency inverter, hydraulic semi-automatic, type GBS 250 Super HA-I Easy • Mitre cuts: left 60° / right 45° • Material height sensor (automatic cut start detection) • Frame and gearbox cast as a single piece – very quiet operation with minimal vibrations • Hydraulic vise, laterally adjustable • Guided, high-quality industrial bearings • Heavy-duty vise and machine base casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring via ammeter • Adjustable feed pressure regulator • Infeed support roller • Ball bearing turntable Semi-automatic operation sequence: 1. Clamp the material 2. Saw start 3. Rapid downfeed to material start, or cut immediately for serial cutting 4. Switch off saw band 5. Raise the frame to just above the material 6. Open the vise

Būklė: naujas, Cutting capacity at 90 degrees: round 350 mm Cutting capacity at 90 degrees: square 330 mm Cutting capacity at 90 degrees: rectangular 450x320 mm Saw band length 4250x34x1.1 mm Band speed 40 + 80 m/min Table height 845 mm Saw band width 34 mm Total power requirement 2.2 kW Machine weight approx. 0.985 t Space requirement approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I · Mitre cutting left and right 60° without machine conversion · 34 mm saw band width · Large material support turntable, ball bearing mounted · Saw band guides positioned via extra-wide linear guides · Heavy-duty, robust gearbox · Large-area clamping plates Ljdpefgyicjfx Apnehn · Infeed and outfeed roller · Removable chip tray (for cleaning/disinfection) · Free-standing, safe and ergonomic control console · Storage space for saw bands and consumables · Cutting pressure and feed rate regulator · Fully hydraulic vice · Super-fast preclamp (front loading) · Material height sensor (automatic cut-start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid lower feed to material or start cutting for serial cuts 4. Stop saw band 5. Raise frame just above material 6. Release vice Optimal, material-independent cutting results through fine adjustment of the saw frame using: * Pressure control valve (cutting pressure-force) * Feed control valve (speed) * Switches with pictograms, easy and clear to operate

Būklė: naujas, apatinio volelio skersmuo: 190 mm, viršutinio volo skersmuo: 190 mm, volelio skersmuo: 190 mm, - Capacity 2070 x 7 mm - Electrically adjustable rear roll - Electrically adjustable lower roll (material clamping) - Digital display for rear roll movement - Digital display for lower roll movement (material clamping) - Hardened rolls Lhodpfx Ajn Ryfwepnon - Conical rolling - Swing-out upper roll - Brake motor - Emergency stop - Documentation - 400V

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2019, Funkcionalumas: visiškai funkcionalus, The conveyor belt from Trio Technik is for sale and has the following specifications: Length: 700 mm Usable width: 410 mm Conveyor belt: blue, temperature-resistant up to 80°C, without cleats Belt speed (constant): 9 m/min Supplied without support legs Ledpfx Aowtfikepnjhn Guide plate: 60 mm high

Būklė: naujas, Saw blade diameter: 370 mm Cutting range at 90°: round 120 mm Cutting range at 90°: square 100 mm Cutting range at 90°: rectangle 180x100 mm Working height: 925 mm Saw blade speeds: 17 - 70 rpm Total power requirement: 3.0 kW Space requirement approx.: 1.9 x 1.45 x 2.1 m SPECIAL OFFER PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic. (20195) · Mitre cuts left 60° and right 45° · Hydropneumatic control of the sawing unit · Electro-pneumatic material feed unit · Smooth-running, high-performance worm gear drive with large transmission ratio, integrated in a robust cast housing for optimum cutting results · Vise with double clamping arm for low-burr cutting, additionally equipped with rapid lateral adjustment for angle changes · Precision prism guide for the gearbox head, laterally adjustable · Especially robust base frame with built-in automatic cooling system · Large chip collection drawer · Chip removal brush integrated in the saw blade guard CNC control system: · Keypad for over 90 different sawing programs with 99 subprograms for length, quantity, and angle · Automatic feed unit 2,000 mm via ball screw spindle, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 – 9,999 mm. Ledpfx Apod Iin Esnehn · Fully hydraulic control of saw frame and clamping devices · Preselection of 3 different material feed rates · Visualization of the entire work process with simple data entry PLEASE NOTE: Price does not include saw blade! (Saw blade price: €204)

Būklė: naujas, Saw blade diameter 275 mm Cutting capacity at 90°: round 90 mm Cutting capacity at 90°: square 80 mm Cutting capacity at 90°: flat 100x70 mm Cutting capacity at 45°: round 75 mm Cutting capacity at 45°: square 70 mm Cutting capacity at 60°: flat 80x60 mm Total power requirement 1.1/1.3 kW Machine weight approx. 0.12 t Space required approx. 0.5 x 0.85 x 0.95 m Versatile professional metal circular saw. Impressive in both performance and price. • For mitre cuts left up to 45° • Suitable for cutting steel, stainless steel, and, to a certain extent, aluminium profiles • Spindle vise with double clamping arm for burr-free cuts • Hardened steel cone safety clutch to protect the saw blades • 2 speeds: 33 + 66 rpm • Automatic cooling directly onto the saw blade • Saw head double bearing • 24 V safety switch in handle with restart lockout Lhsdpfxod Iipaj Apnen • Length stop, assembly tools • Fully enclosed, solid cast construction • Mitre angle adjustment on the operator side • Machine base (optional) ATTENTION: Price does not include saw blade!!! (Saw blade price €70)

Būklė: naujas, Saw blade diameter: 370 mm Cutting range at 90 degrees, round: 120 mm Cutting range at 90 degrees, square: 100 mm Cutting range at 90 degrees, rectangular: 180x100 mm Lhoded Iin Hspfx Apnsn Working height: 925 mm Saw blade speed: 15 - 70 rpm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.71 t Space requirements: approx. 1.9 x 1.45 x 2.1 m SPECIAL PROMOTIONAL PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic. (20192) · Miter cutting left 60° / right 45° · Hydro-pneumatic control of saw unit · Electro-pneumatic material feed unit · Smooth-running, high-torque worm drive with large g ear reduction, integrated into a rigid cast housing for optimal cutting results · Vise with double clamping arm for burr-free cuts, also with lateral quick adjustment for miter angle changes · Precision prismatic guide for the drive head, adjustable on the side · Especially robust machine base with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade guard MPS control system: · Storage of cut start/end positions · Display of current consumption, piece count, cutting time, etc. · Adjustable water cooling · Adjustable cutting pressure NOTE: Price does not include saw blade! (Saw blade price: €204)

Gamybos metai: 2025, būklė: naujas, X-ray inspection system for medium-sized packages and pouches. Suitable for detecting foreign objects made of metal, glass, stone, plastic, etc. in food or non-food products. Lhodjv Nm Ihepfx Apnsn - Specifications: Conveyor belt width: 410 mm; Detection accuracy: Pb from Ø 0.2 mm, Fe from Ø 0.28 mm, SUS from Ø 0.28 mm, non-metallic such as stone or glass from Ø 1.2 mm; X-ray output: 80 kVp, 1.25 mA; Detector resolution: 0.4 mm; X-ray emission: < 1 μSv/h; Conveyor belt height: 850 ± 30 mm; Conveyor speed (product-dependent): 10 – 60 m/min; User interface: 15" touchscreen; Software: intellisens®X-ray; Operating temperature: 5 – 35°C; Rejection system: available as an option according to requirements; Power supply: 220VAC, 50/60Hz; System dimensions: L 1985 x W 915 x H 1790 mm; Weight: 560 kg. Please note that our new prices are often below standard used prices. Feel free to contact us and let us know about your packaging application. Typically, 30–50 different new machines are always available in stock for immediate delivery. For custom-built machines, we offer very short delivery times starting from around 3 weeks. All machines come with a full warranty.

Būklė: naujas, Saw blade diameter: 315/350 mm Lsdpfed Iin Tsx Apnjhn Cutting range at 90 degrees, round: 125 mm Cutting range at 90 degrees, square: 110 mm Cutting range at 90 degrees, flat: 160x90 mm Cutting range at 45 degrees, round: 105 mm Cutting range at 45 degrees, square: 90 mm Cutting range at 60 degrees, flat: 80x100 mm Total connected load: 1.8/2.5 kW Machine weight: approx. 0.2 t Space requirement: approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) • For mitre cuts to the right and left up to 45°, end stop at 90° and 45° left • Suitable for cutting steel, stainless steel, and, to a certain extent, aluminium profiles • Vice with quick-release lever, longitudinally adjustable clamping jaw, adjustable guide, and double clamping arm for burr-free cuts • Taper safety clutch made of hardened steel to protect the saw blades • Large, solid cast baseplate for maximum stability and low-vibration cutting • 2 speeds: 30 + 60 rpm • High-performance special gearbox with flexible coupling for heavy-duty applications • Automatic cooling directly onto the saw blade • Saw head with double bearing • 24 V safety switch in the handle with restart protection • Length stop, assembly tools NOTICE: Price is without saw blade!!!

Būklė: naujas, Cutting capacity at 90 degrees: round 255 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular 300 x 180 mm Saw blade length: 2,765 x 27 x 0.9 mm Table height: 870 mm Blade speed: 18 - 110 m/min Total power requirement: 1.5 / 1.8 kW Machine weight approx. 0.63 t Space requirement approx. 1.8 x 1.85 x 1.85 m Mitre Band Saw, Fully Automatic GBS 250 Super VA-I MPS • Mitre left 45°, automatic operation • Mitre left 60°, semi-automatic operation    (Cuts without programming) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Material height sensor (automatic detection of cut start) • Frame and gearbox made from a single casting, very quiet operation, minimal vibration • Removable swarf tray (for cleaning/disinfection) • Excellent accessibility to saw, material, and feed unit • Hinged safety cover • Fine adjustment for feed rate • Semi-automatic cutting! Automatic sawing with microprocessor control Adjustable for 2 program levels Semi-automatic operation Fully automatic operation Start after input of desired quantity and length: material approach, cutting operation, and piece counting until program completion • MPS control enables input of the desired number of feed strokes • All essential machine data is displayed on the LED display during the cutting process (power consumption, cutting time, piece count) • Entered data are stored in RAM memory Lhjdpfx Aped Iip Asnsn • The self-diagnostic circuit automatically displays all irregularities as error messages and monitors the entire process • Floating-mounted feed unit • Length setting via handwheel and vernier scale with mechanical position indicator.    Adjustable for cut lengths from 2.5 mm to 420 mm, or repeatable 1–29 times through reversing automation; remnant piece length 210 mm

Būklė: naujas, Saw blade diameter: 370 mm Cutting capacity at 90 degrees (round): 120 mm Cutting capacity at 90 degrees (square): 100 mm Cutting capacity at 90 degrees (rectangular): 180x100 mm Working height: 925 mm Saw blade speed: 15+30 or 30+60 rpm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.44 t Space requirement: approx. 0.8 x 1.1 x 2.1 m SPECIAL OFFER PRICE!!! High-performance vertical circular saw, hydraulically-pneumatic semi-automatic. (20185/20188) · Mitre cutting: left 60° / right 45° Ledpod Iin Ijfx Apnohn · Vise with double clamping arm · Robust prism guide for saw head, dovetail guides adjustable · Chip brush · Automatic cooling system · Metal tension wheel for high power transmission · Heavy-duty cast table Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid approach down to start of material or, for series cuts, cut directly 4. Saw band off 5. Raise frame just above material 6. Open vise MPS control: · Storage of cut start/end positions · Display of current consumption, piece count, cutting time, etc. · Adjustable water cooling · Cutting pressure regulator ATTENTION: Price excludes saw blade! (Saw blade price: €204)

Būklė: naujas, Saw blade diameter: 315 mm Cutting range at 90 degrees: round 108 mm Cutting range at 90 degrees: square 93 mm Cutting range at 90 degrees: rectangle 150 x 90 mm Working height: 920 mm Saw blade speeds: 17+33 or 33+66 rpm Total power requirement: 1.5/1.8 kW Machine weight: approx. 0.36 t Space requirement: approx. 0.8x0.9x1.95 m SPECIAL OFFER PRICE!!! High-performance vertical circular saw VKS 315 HA (20154/20155) • Mitre cuts left 60° + right 45° • Vice with double clamping arm (4-way locking) for burr-free cuts and quick lateral adjustment • Saw table with large rotary plate and particularly robust vice for optimal material clamping • Robust prism guide for the saw head (adjustable dovetail guide) • Automatic cooling system • Machine base with chip drawer • Metal handle for high clamping force • Spring package Semi-automatic operation: Lhsdpfx Aped Iin Ronsn 1. Start saw 2. Clamp material 3. Rapid feed descent to start of material or, for serial cuts, start cutting 4. Switch off saw blade 5. Raise frame to just above material 6. Open vice PLEASE NOTE: Price does not include saw blade!!! (Saw blade price: 109 EUR)

Būklė: naujas, Pjūklo diskas: 250 mm Pjovimo sritis 90°: apvalus 80 mm Pjovimo sritis 90°: kvadratas 70 mm Pjovimo sritis 90°: plokščias 95x60 mm Lodsd Iipbepfx Apnohn Pjovimo sritis 45°: apvalus 70 mm Pjovimo sritis 45°: kvadratas 60 mm Pjovimo sritis 60°: plokščias 65x60 mm Bendras galios poreikis: 1,0 kW Staklių svoris apie 0,075 t Užimamos vietos matmenys apie 0,3 x 0,8 x 0,75 m AKCIJOS KAINA!!! Ideali metalo diskinė pjovimo staklė dirbtuvėms ir montavimui • Kampiniams pjūviams į kairę iki 45° • Skirta pjauti plieninius, nerūdijančio plieno ir iš dalies aliuminio profilius • Veleninė spaustuvė su dviguba spaudimo svirtimi, mažinanti atplaišų susidarymą • Pasirinktinai su 230 V arba 400 V varikliu • Aušinimo automatikas tiesiogiai ant pjūklo disko • Dvigubai guoliuotas pjūklo galvutės tvirtinimas • 24 V saugos jungiklis rankenoje su iš naujo paleidimo blokavimu • Ilgio ribotuvas, montavimo įrankiai • Apatinė dalis (pasirinktinai) – papildoma kaina 172 EUR DĖMESIO: kaina be disko!!! (Disko kaina 62 EUR)

Būklė: naujas, Tekinimo skersmuo virš lovos: 400 mm Tekinimo skersmuo virš suporto: 260 mm Tekinimo ilgis: 1500 mm Tekinimo skersmuo įduboje: 570 mm Sukimosi greitis: 45 - 1800 aps./min Centru aukštis: 210 mm Veleno anga: 52 mm Lodpey Ehxxofx Apnohn Zylindro kūginė jungtis: MK 4 Maitinimo įtampa: 400 V Bendras galios poreikis: 3,5 kW Staklių svoris apytiksliai: 1,5 t Užimamas plotas apytiksliai: 2,6 x 1,1 x 1,7 m Profesionali pramoninė staklė Skaitmeninis indikatorius 3-žandų griebtuvas 200 mm 4-žandų griebtuvas Planšyvas Stacionari luneta Judanti luneta Multifix įrankių laikiklis Staklių šviestuvas Pedalinis stabdis Drožlių padėklas, drožlių apsauginė siena Grūdintos ir šlifuotos lovos kreipiančiosios Pilnai įrengta aušinimo sistema Griebtuvo apsauga Staklių kojelės Staklių įrankiai

Būklė: naujas, Cutting capacity at 90°: round 310 mm Cutting capacity at 90°: square 280 mm Cutting capacity at 90°: rectangle 400 x 250 mm Saw band length: 4020 x 34 x 1.1 mm Band speed: 18 - 100 m/min Table height: 890 mm Total power requirement: 2.2 kW Machine weight: approx. 0.99 t Space requirements: approx. 1.85 x 2.2 x 2.0 m Mitre band saw, fully automatic, GBS 310/400 VA-I CNC • Mitre cut left 45° automatic operation • Mitre cut left 60° semi-automatic operation (manual cuts without programming) • Material height sensor (automatic detection of cut start) • Frame and gearbox cast as one piece, very quiet operation and minimal vibrations • Removable chip tray (for cleaning) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • Excellent accessibility to saw, material, and feed unit • Safety cover foldable • Fine adjustment of feed • Semi-automatic cutting! • With CNC control for workflow optimization Input options for parameters such as quantities and material lengths, automatic deduction of kerf • CNC control for 10 different sawing programs with 99 subprograms for various lengths and quantities, e.g. one cutting program with diverse section lengths • Automatic feeding unit (CNC) via ball screw, incremental feed with automatic length compensation. Adjustable for section lengths from 2 mm to 9,999 mm, minimum end piece 170 mm. Lhjdpfxed Iipro Apnjn

Būklė: naujas, Cutting range at 90°: round 310 mm Cutting range at 90°: square 280 mm Cutting range at 90°: rectangular 400x250 mm Saw blade length: 4020x34x1.1 mm Blade speed: 37 + 74 m/min Table height: 940 mm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.68 t Space requirement: approx. 1.5 x 1.78 x 1.3 m SPECIAL PRICE!!! Double miter band saw, hydraulic semi-automatic, GBS 310/400 HA-I Easy • Mitre left 60° + right 45° • Powerful industrial hydraulics, 18 bar • Optimal material access • Ammeter for monitoring: - Cutting force optimization - Blade life monitoring - Cutting process control • Vise opens/closes hydraulically • Swarf cleaning brush • Ball bearing-supported material turntable • Moveable quick-action vise • Material height sensor (automatic cut-start detection) Semi-automatic operation: 1. Clamp material 2. Start saw Ljdpfx Aped Iiptenehn 3. Quick downfeed to material start or for serial cuts directly start sawing 4. Stop saw blade 5. Raise frame to just above material 6. Open vise

Būklė: naudotas, rida: 41 550 km, galia: 309 kW (420,12 AG), pirmoji registracija: 05/2001, kuro tipas: dyzelinas, tuščias svoris: 12 500 kg, didžiausias leistinas svoris: 28 500 kg, bendras svoris: 41 000 kg, ašių konfigūracija: 8x8, ratų bazė: 5 100 mm, spalva: žalia, vairuotojo kabina: dieninė kabina, pavaros tipas: mechaninis, emisijos klasė: euro2, pakaba: plienas, sėdimų vietų skaičius: 2, priekinės padangos dydis: 365/85R20, galinės padangos dydis: 315/80R22,5, Įranga: ABS, diferencialo užraktas, kabina, kruizo kontrolė, papildomi žibintai, priešrūkiniai žibintai, vairo stiprintuvas, visų varančiųjų ratų pavara,

Būklė: naujas, Cutting diameter 280 mm Bandsaw blade length 3370 mm Cutting width 350 mm Bandsaw blade dimensions 3370 x 27 x 0.9 mm Cutting capacity at 90° round 280 mm Cutting capacity at 90° square 250 mm Cutting capacity at 90° rectangular 350 x 200 mm Cutting capacity at 45° round 240 mm Cutting capacity at 45° square 220 mm Cutting capacity at 45° rectangular 230 x 220 mm Cutting capacity at 60° round 170 mm Cutting capacity at 60° square 150 mm Cutting capacity at 60° flat 170 x 100 mm Lhsdpfxjivuqte Apnon Bandsaw blade speed 37 + 74 m/min Total power requirement 1.8 kW Machine weight approx. 0.6 t Space requirements approx. 1.5 x 1.7 x 2.0 m

Būklė: naudotas, rida: 41 550 km, galia: 309 kW (420,12 AG), pirmoji registracija: 05/2001, kuro tipas: dyzelinas, tuščias svoris: 15 060 kg, didžiausias leistinas svoris: 25 940 kg, bendras svoris: 41 000 kg, padangos dydis: 315/80R22,5, ašių konfigūracija: 8x8, ratų bazė: 5 100 mm, spalva: žalia, vairuotojo kabina: dieninė kabina, pavaros tipas: mechaninis, emisijos klasė: euro2, pakaba: plienas, sėdimų vietų skaičius: 2, priekinės padangos dydis: 365/85R20, galinės padangos dydis: 315/80R22,5, Įranga: ABS, diferencialo užraktas, kabina, kruizo kontrolė, papildomi žibintai, priešrūkiniai žibintai, vairo stiprintuvas, visų varančiųjų ratų pavara,

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: COMBO (Plasma, Drilling, OXY-Fuel, Bevel), Įranga: CE žymėjimas, dokumentacija / vadovas, * The COMBO offers clients the most innovative technological solutions and has a wide range of models. * It is a highly advanced machine featuring a 6- and 12-station automatic tool changer with ISO 40 drilling system, offering various capabilities including drilling, tapping, countersinking, plasma cutting, OXY-fuel cutting, and ±45° bevel cutting. * The COMBO provides a working range from 1,500 mm x 3,000 mm up to 4,000 mm x 24,000 mm and can be equipped with high-capacity plasma power sources. * Plasma Cutting * Drilling * Tapping * Countersinking * OXY-Fuel Cutting * Fully welded, heavy-duty body construction. * High-durability cutting table offering easy exchangeability. * Dual-drive linear guides, racks, and pinions. * Compliance with CE standards. ISO 40 Drilling System * 6-station automatic tool changer (optionally 12 stations). Lhsdpfx Aoyy Rn Sopnjn * CNC-controlled automatic lubrication system during cutting. * 26 kW spindle motor power. * Drilling capacity: Ø M5 to Ø M40 (HSS, UDRILL). * Drilling depth: 100 mm * Drilling feed rate: 0.15 – 0.35 mm/rev. * Spindle speed: 1,500 rpm * Hypertherm / Thermal Dynamics power sources. * Hypertherm / Eurosoft CNC. * Import capability of .dxf and .dwg files via Pronest / Cut-Expert CAD-CAM.

Būklė: naudotas, Gamybos metai: 2014, Technical details: Swing diameter over bed: 660 mm Swing diameter over cross slide: 460 mm Turning length: 1650 mm Distance between centers: approx. 2200 mm Max. workpiece diameter over bed: 660 mm Max. workpiece diameter over slide: 460 mm Max. swing diameter in gap: 960 mm Center height: 320 mm Lsdpeu Ix Nrofx Apnshn Control system: Siemens 828 D ShopTurn X-axis travel: approx. 350 mm (plan) Spindle bore: Ø 105 mm Speed range: 26-224 / 225-670 / 671-2,000 infinitely variable rpm Stepless feed rate X: 0.5 – 3,000 mm/min Stepless feed rate Z: 1 – 3,000 mm/min Rapid traverse X + Z axes: 6 m/min Tailstock quill taper: MT 6 Quill travel: 300 mm Total power requirement: approx. 23 kW Machine dimensions (LxWxH): approx. 4.2 x 2.3 x 2.3 m Chip conveyor dimensions (LxWxH): 2.3 x 1.7 x 1.3 m Chip conveyor includes coolant tank with pump 3-speed gearbox with electronic gear selection Tool holder equipped with/according to Silent Tool technology (Capto C6) Handheld control unit Foot switch Control panel Hydraulics Automatic door locking (pneumatic) Accessories as shown in the comparable photo. *

Būklė: geras (naudotas), Universalus tekinimo staklės, tekinimo staklės, tekinimo centras, valdymo ir traukos sraigto tekinimo staklės, valdymo ir traukos sraigto tekinimo centras – Gamintojas: OMAP, valdymo ir traukos sraigto tekinimo centras, modelis 180 – Tekinimo ilgis: 1600 mm – Tekinimo skersmuo virš stalo: 410 mm – Tekinimo skersmuo be stalo: 570 mm – Tekinimo skersmuo virš atramos: 230 mm – Sraigto skylė: Ø 53 mm – Sraigto sukimosi greitis: 12–1650 aps./min. – Trijų žandikaulių įrankių laikiklis: Röhm, Ø 250 mm Lhedpfxez D Tt Ho Apnon – Pritvirtinimo lizdas su įvairiakryptiniu atraminiu įtaisu: MK3 – Pavara: 2,2 kW – Priedai: įskaičiuoti, žr. nuotraukas – Matmenys: 2670/900/H1355 mm – Svoris: 1460 kg

Būklė: naujas, - Capacity 250 x 8 mm - Hydraulic - Foot control Lsdpfx Apsnwlptonehn - Central lubrication system - Emergency stop - Documentation - 400V

Būklė: geras (naudotas), rida: 650 302 km, galia: 302 kW (410,61 AG), pirmoji registracija: 12/2014, kuro tipas: dyzelinas, tuščias svoris: 9 400 kg, didžiausias leistinas svoris: 8 600 kg, bendras svoris: 18 000 kg, ašių konfigūracija: 4x2, ratų bazė: 5 410 mm, kuras: dyzelinas, pavaros tipas: automatinis, emisijos klasė: Euro 6, bendras ilgis: 9 650 mm, bendras plotis: 2 550 mm, bendras aukštis: 3 300 mm, cilindrų skaičius: 6, darbinio tūrio: 12 902 cm³, nominali galia: 302 kW (410,61 AG), Įranga: ABS, EBS (Elektroninė stabdžių sistema), autonominis šildytuvas, centrinis užraktas, diferencialo užraktas, elektrinis langų reguliavimas, elektroninė stabilumo programa (ESP), galinis keltuvas, kruizo kontrolė, priekabos jungtis, sėdynės šildytuvas,