Šaltas diskinis pjūklas

BERG & SCHMID VKS 370 HA MPS

Būklė: naudotas, CNC press brake AMADA model HFBO 50 x 2000 Gbedjw Iq Ugopfx Acyei Serial no. HFBO 50 20 S60906 Year of manufacture: 1996 Press brake with 8 axes – CNC control Operateur II Pressing force: 50 tons Working length: 2090 mm Stroke: 200 mm Throat depth: 420 mm Distance between side frames: 1660 mm Maximum tool installation height: 460 mm Table width: 60 mm Table height above floor: 910 mm Motor power: 4.5 kW Power supply: 400 Volt, 50 Hz, 20 Amp. - 8-axis CNC control Operateur II, Y1-Y2 / X1-X2 / Z1-Z2 / R1-R2 - 2 freely programmable back gauge fingers, adjustable laterally and in height (Z1+Z2+R1+R2) - Press beam with servo valves and measuring system Y1 and Y2 - Operation via electric footswitch and/or two-hand control panel - Mechanical lever-type tool clamping for the top tool (5 pcs AMADA Expert, 5 pcs UKB 50.667 H=120 mm) - Tool holder for the bottom tool, 60 mm wide - 11-piece upper tool set, 30°, total length 1675 mm - comprising: 1x 835 / 1x 300 / 1x 165 / 1x 50 / 1x 45 / 1x 35 / 1x 20 / 1x 15 / 1x 10 / 2x 100 mm (end pieces) - 2-piece lower tool, 88° - V 8, total length 1250 mm - comprising: 1x 835 / 1x 415 mm - Indicated operating hours: 30,537 h - Operating manual, electrical diagram, spare parts book included Weight: 4,700 kg Good condition

Būklė: naudotas, Gamybos metai: 2007, mašinos/transporto priemonės numeris: 001669, Lg 33121 Single-sided Decoiler ARKU AH 3000/ST-M Year of manufacture: 1995 Max. strip width: 600 mm Max. load capacity: 3,000 kg Max. coil outer diameter: 1,800 mm Expansion: hydraulic Pressure arm: hydraulic Decoiler with auxiliary drive and brake Fixed coil loading station + decoiler traversing device Includes: Lg 33221 High-Performance Precision Leveler Gbsdpohigmbefx Acyji LORENZ BRM 50/620.9 Year of manufacture: 2007 Machine no.: 001669 Max. pass-through width: 620 mm Number of leveling rollers: 9 Leveling roller diameter: 50 mm Material thickness: 0.7 to 6.0 mm Leveling rollers are multi-supported to prevent deflection All rollers driven by distribution gearbox and cardan shafts. Used, as-is ex-stock, immediately available. Refurbishment available upon request. Delivery time as agreed. Further data coming soon or available on request.

Būklė: naujas, Cutting range at 90°: round 510 mm Cutting range at 90°: square 450 mm Cutting range at 90°: rectangular 650 x 450 mm Blade speed: 15 - 100 m/min Table height: 844 mm Bandsaw blade dimensions: 5320 x 34 x 1.1 mm Total power requirement: 3.0 kW Machine weight approx. 2.1 t Space requirement approx. 1.9 x 2.87 x 1.3 m SPECIAL OFFER PRICE!!! 2-Column Double Miter Bandsaw K-tech DG 62/45 HA-I - 2-column miter saw - Robust, yet easy to operate - Material height sensor (automatic cut start detection) - Smooth operation thanks to angled cutting, feed regulator, and cutting pressure regulator Gbsdpfsd Iipmex Acysi - Heavy-duty material infeed roller - Removable chip tray (for cleaning) - Energy-saving and low-vibration due to angled cutting - Ergonomic, safe, and free-standing control panel - Frequency-controlled saw drive 15 - 100 m/min. - Hydraulic cutting pressure control valve - Hydraulic control of saw frame and vice - LEDs for monitoring all safety functions - Large-dimensioned flywheels (520 mm) each - Clear miter adjustment up to 60° Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to material start or direct cutting for serial cuts 4. Saw blade off 5. Raise frame just above the material 6. Vice opens

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, veikimo valandos: 216 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 20MS090000/007, bendras ilgis: 3 000 mm, įvesties srovės tipas: Oro kondicionierius, bendras plotis: 2 500 mm, bendras aukštis: 1 900 mm, bendras svoris: 1 450 kg, tuščias svoris: 1 450 kg, darbinis plotis: 900 mm, suslėgto oro jungtis: 6 juosta, pralaidumo greitis: 50 mm/s, Gluing and Longitudinal Splicing Machine Gbsdpsw E Rfbofx Acyei For thicknesses from 0.4 to 3 mm with direct gluing. With edge pre-gluing up to 5 mm. Machine with very little use, Available immediately from site. Separate electric motors for chain and glue application Glue is applied to the edge of the newly inserted veneer strip, increasing the bond strength. Robust, durable stainless steel conveyor chain with pivot joints Separate adjustment for temperature, speed, and pressure Quick and easily accessible glue tank for fast and simple refilling or cleaning Multiple heating zones for individual temperature adjustment Extended glue tank service life through integrated cooling unit Continuously variable feed speed INCLUDES GLUE COOLER Technical data: Throat depth: 900 mm Minimum veneer strip width: 45 mm Minimum veneer strip length: 300 mm Veneer strip thickness: 0.4 – 3.0 mm (up to 5 mm) Maximum veneer moisture: 8 – 12% Working height: 900 mm Feed speed: 5 – 50 m/min Heated section length: 1000 mm Maximum heating temperature: 250 °C Electrical connection: 9.0 kW, 400 V, 50 Hz Compressed air: 6.0 bar Dimensions (L x W x H): 2400 x 2300 x 1900 mm Weight: 1500 kg

Būklė: geras (naudotas), Kabinen-Hängebahnschleudermaschine 250 kg TOSCA TS-250 Typ: Hängebahn (Hook Type) Maximaler Werkstückdurchmesser: 1000 mm Maximale Werkstückhöhe: 1500 mm Godpevpgq Nefx Acyjbi Maximales Werkstückgewicht: 500 kg Öffnungsbreite der Maschine: mm Anzahl Turbinen: 2 Turbinen-Typ: 360 Turbinenraddurchmesser: 360 mm Turbinenleistung: 7,5 kW Max. Turbinenförderleistung: 105 kg/min Typ des Transportgleises: Y Reinigungssystem: Luftseparator (Airwash) Fundament erforderlich: Nein Gehäuseschutz: Mangan + Gummi Erforderlicher Luftdurchsatz: 3.000 m3/h Max. installierte Leistung: ca. 19 kW Gesamtgewicht der Maschine: 0 kg Gesamtbreite der Maschine: mm Gesamthöhe der Maschine: mm Gesamtlänge der Maschine: mm Die Maschine wird derzeit einer Komplettüberholung unterzogen. Sämtliche beschädigten Komponenten werden durch neue ersetzt, Turbinen werden vollständig überholt, Neulackierung in RAL 7037/2000. Die Auslieferung erfolgt im Zustand WIE NEU. !!! WIE NEU ZUSTAND !!!

Būklė: naujas, Gamybos metai: 2023, Tube drilling machine, angled drilling machine, drilling automatic TDM100, manual, with one drilling head IMMEDIATELY AVAILABLE FROM STOCK + CAN BE VIEWED UNDER POWER - Minimum quantity lubrication - Manual material clamping - Manual feed - Max. tube length 3,000 mm (option: 6,000 mm) - Positioning accuracy +/- 0.2 mm - 10 stops (expandable as required) - Manual loading and unloading of material - Drilling head swivels +/- 50° - Manual 360-degree tube rotation device - Drilling unit power 1 x 2.2 kW - Motor speed 295 - 2,950 rpm - Speed display on touch panel - Drilling unit illumination - Integrated tool cabinet - Round tubes up to 114 mm - Square tubes up to 100 x 100 mm - Flat material up to 100 x 15 mm - T-profile up to 100 x 100 x 12 mm - L-profile up to 100 x 100 x 8 mm Gbjdpfxelgvkij Acyei - Double post up to 100 x 15 mm - Flow drilling up to M12 - Drill holes up to Ø 50 mm

Būklė: visiškai atnaujintas (naudotas),

Būklė: naujas, Saw blade diameter: 350 mm Cutting capacity at 90 degrees (round): 115 mm Cutting capacity at 90 degrees (square): 95 mm Cutting capacity at 90 degrees (rectangular): 180 x 95 mm Working height: 925 mm Saw blade speeds: 15 - 90 rpm Total power requirement: 3.0 kW Gbsdsfg Rlcepfx Acysi Machine weight approx.: 0.68 t Space requirements approx.: 0.8 x 1.0 x 1.85 m Electropneumatic, vertical, linear-guided automatic saw for use with HSS saw blades, suitable for serial cuts from 60° left to 45° right on steel. The machine can also operate in semi-automatic cycle mode. CNC automatic machine with multiprocessor and two axes controlled by MEP control system of the latest generation, allowing the programming of up to 1000 different cutting programs on the same material thickness, each with different cutting lengths and quantities.

Gamybos metai: 2003, būklė: naudotas, Pressure 100 t Stroke 10–130 mm Strokes per minute 30–90 spm Throat depth 330 mm Ram adjustment 100 mm Table surface 950 x 660 mm Ram surface 540 x 440 mm Table pass-through opening Ø 230 mm Table height 1000 mm Ram bore Ø 50 mm Total power requirement 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Press control Beutler Datatech Gbodpsra Rr Eefx Acysi Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot pedal operation GSW straightening and feeding machine VRMA 40/78, year 2003 Feed control HDS 50 BSA decoiler NO20/400V-AP

Būklė: naujas, - Manually operated - Shaft size: 30 mm - Weight: 30 kg Gbsdpolwpr Rsfx Acyji