Axon Vmc1270 pirkti naudotą (4 643)

Būklė: naudotas, Slot spindle 2 pcs. Number of milling units: 5 Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 NC window system optionally available with extensive tooling ----- Optionally available (at additional cost): IV 68 timber, timber/aluminum IV 78 timber, timber/aluminum IV 68 entrance doors Technical manufacturer description: ----- Pos. 1: Weinig Unicontrol 10 NC window system ----- Crosscut saw ----- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed electronically adjustable with brake 3,000-6,000 rpm. Maximum tool swing diameter: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, 8 positions for edge rounding from above Horizontal rounding unit (bottom) ----- Axial adjustment mechanically coupled with crosscut saw 1st tenoning and slotting spindle ----- Motor power with brake: 15 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool swing diameter: 400 mm Tool clamping length: 640 mm Axial adjustment: NC axis Default position below table: 5-10 mm Radial adjustment: fixed 2nd tenoning and slotting spindle ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 2,925 rpm Maximum tool swing diameter: 400 mm Tool clamping length: 320 mm Axial adjustment: NC axis Radial adjustment: NC axis Default position below table: 5-10 mm 1st profiling spindle (climb and conventional milling) ----- Motor power with brake: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool swing diameter: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm, NC axis Radial adjustment: NC axis Default position below table: 5-10 mm 2nd profiling spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool swing diameter: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm, NC axis Radial adjustment: NC axis Default position below table: 5-10 mm Horizontal top profiling unit ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 40 mm Spindle speed: 5,850 rpm Maximum tool swing diameter: 130 mm Adjustment pneumatic, 8 positions axial and radial 3rd profiling spindle ----- Motor power: 11 kW Spindle diameter: 50 mm Spindle speed: 6,000 rpm Tool swing diameter: 140 mm Maximum tool diameter: 232 mm Tool clamping length: 400 mm with counter bearing Axial adjustment: 350 mm, NC axis Radial adjustment: NC axis Default position below table: 5-10 mm Vertical profiling unit (right, at machine end) Gedpfx Ahezawizj Hjiw ----- Motor power with brake: 3.0 kW Spindle diameter: 40 mm Clamping length: 160 mm Spindle speed: 5,850 rpm Maximum tool swing diameter: 210 mm Adjustment pneumatic, 8 positions axial and radial Additional equipment -----...

Būklė: naudotas, Gamybos metai: 2020, Max. workpiece length 3740 mm Milling spindle: 1 unit Main motor: 15 kW Control: CNC Felder Format4 Type Profit H500S 16.38 CNC Machining Center For sale on behalf of client ----- - From a wooden window manufacturing operation. - Machine still connected and ready for demonstration - Sold without machining tools Technical Description (Summary, full text in PDF): ----- Working dimensions: X = 3,740 mm Y = 1,570 mm Z = 350 mm passage height (from console level), depending on clamping system—see layout. Travel distances: X = 4,930 mm Y = 1,925 mm Z = 500 mm Axis positioning speeds: X = 80 m/min Y = 80 m/min Z1 = 30 m/min Z2 = 20 m/min - 5-axis milling spindle: 15 kW HSK F63 with liquid cooling, 1,000 - 24,000 rpm - Additional C-axis locking mechanism - Drilling head DH 18 6H1S: vertical drilling unit with 12 spindles (7 spindles in X-direction, 5 in Y-direction, grooving saw in X-direction) Horizontal drilling unit with 6 spindles, 4 in X, 2 in Y. 1 grooving saw in X-direction, max. diameter 120 mm - Disk tool changer with 24 tool positions, mounted on right side of machine frame Max. tool diameter 240 mm Max. tool height 370 mm - Change station for circular saw blade, mounted on gantry/tool changer Max. saw blade diameter 350 mm - Tool changer on the left in the machine frame with 10 tool positions Max. tool diameter 180 mm Max. tool length 230/300 mm Collet spacing 110 mm - Disk tool changer with 24 positions, mounted on gantry, traversing in X-direction Max. tool diameter 240 mm Max. tool height 370 mm - Traversing pick-up position for chip deflector shield - 6 workpiece supports, s-motion position-controlled - 2 working zones for pendulum operation - Vacuum pump 90 m³/h - Chip conveyor - Line laser for segment arch processing - Includes all existing solid wood clamps and vacuum suction cups - Automatic central lubrication - CE safety equipment Gedpfsyq Sztox Ah Hjiw - Software "WoodFLash" Lamello Clamex P Macro Notch Macro - "Greenline Package" for reduced energy consumption ----- Price for the above-listed machine on request! ----- Option: New Oppold Tool Set for H500: - Windows Timber windows IV 68, 78 and 88, inward-opening, with interchangeable rebate (side, top). Glazing rebate 20 mm, frame and sash profile 20° bevel With loose and pre-milled glazing bead Old-building timber windows IV 68, 78 and 88, inward-opening, no rain rail, with interchangeable rebate (side, top and bottom). Glazing rebate 20 mm, frame and sash profile 15° bevel With fitted weather bar Timber-aluminium windows (system provider: Gutmann Mira, bevelled rebate system) HA IV 68, 78 and 88, inward-opening, 2 sash variants: square and bevelled, interchangeable rebate bottom, side + top - Entrance doors Timber HTIV 68, 78 and 88 with single rebate in frame and double rebate in sash Inward opening, 1 sash variant, glazing rebate, without interchangeable rebate Offset profile Timber-aluminium IV 68, 78 and 88 with single rebate in frame and double rebate in sash - Lift-slide doors Timber HS IV 68, 78 and 88, without frame processing Timber-aluminium HS IV 68, 78 and 88, without frame processing Execution...

Būklė: naudotas, Gamybos metai: 2012, x-axis travel 800 mm y-axis travel 800 mm z-axis travel 600 mm Control Heidenhain iTNC 530 Spindle speed 30 - 8,000 rpm Spindle motor 25 kW Torque 244 Nm Tool holder SK 40 Number of tool stations 30 + 190 positions Gsdoyzt Dlepfx Ah Heiw A-axis ° C-axis 360 ° Clamping area of table 800 x 630 mm Table load capacity 600 kg Rapid traverse (x / y / z) 40 m/min Power-on hours approx. 79,968 h Spindle hours approx. 800 h In our opinion, the machine is in good used condition and can be inspected under power by appointment. The spindle has been overhauled. Technical features & accessories: - Additional magazine - Chip conveyor - Infinitely variable spindle speed - 5-axis simultaneous machining - ICS 70 bar - Coolant gun - Workpiece probe - Blum laser tool measurement - Electronic handwheel Heidenhain 410 Accessories, depicted tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Modifications, errors in the technical data and details, as well as prior sale, are reserved!

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 129-32, X ašies eiga: 400 mm, Y ašies eiga: 300 mm, Z ašies eigos atstumas: 400 mm, nominali (akivaizdi) galia: 47 kVA, valdiklių gamintojas: GE FANUC, valdiklio modelis: SERIES 18i-M, bendras aukštis: 2 600 mm, bendras ilgis: 4 000 mm, bendras plotis: 2 400 mm, bendras svoris: 8 000 kg, tvirtinimo skersmuo: 40 mm, įėjimo srovė: 80 A, stalo skersmuo: 300 mm, Įranga: drožlių transporteris, CHIRON FZ 15 K S 5 AXIS – universalus apdirbimo centras – Darbinė įtampa: 400 V – Dažnis: 50/60 Hz – Komplekte: PEISELER ZAS 280/S NC pasukamas galvutė – Įrankio laikiklis: SK 40 – Komplekte: drožlių transportavimo įrenginys Dėmesio: prekė turi būti paimta nustatyta data, kuri bus sutarta vėliau, tarp 2026 m. spalio 7 d. ir 2026 m. spalio 14 d. Gjdpfx Ahezlgimo Hjiw FCA D-35576 Vetzlaras – pakrauta į sunkvežimį

Būklė: naujas, Gamybos metai: 2025, HARDLINE MACHINING CENTER Z-AXIS WORKING RANGE 300 MM OMRON SERVO AC HIGH SPEED DRIVES 1.5 kW T-SLOT TABLE FOR M12 CLAMPING – MADE OF SOLID STEEL INDUSTRIAL REAL-TIME CONTROL SYSTEM OSAI OPENSMART, ETHERCAT COMMUNICATION EUCHNER HBA-103037 HANDHELD OPERATOR PANEL CONTROL CABINET AIR CONDITIONING SPINDLE KIT UP TO 35 KW MAX ENCODER FOR HSD ATC SPINDLES ACTIVE COOLING SYSTEM – CW-6000 CHILLER 12-POSITION LINEAR TOOL MAGAZINE TOOL LENGTH SENSOR RENISHAW TS27R TOOL PROBE TOOL PRESENCE DETECTOR Godpfxsu U Hh Tj Ah Hoiw PREMIUM MIST COOLING SYSTEM AIR BLAST NOZZLE AUTOMATIC CENTRALIZED GREASE LUBRICATION SYSTEM SKF REMOTE SERVICE ACCESS (REMOTE DIAGNOSTICS) Options for tapping, drilling, chamfering, milling, thermal drilling in aluminum and steel. Tool probing system included. #router #CNC #millingmachine #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Būklė: naujas, Gamybos metai: 2026, Control system: Multi-axis real-time interpolator with active trajectory prediction, LAN and EtherCat communication, sampling time below 1 ms, correction map, RTCP, remote service access. Working area: from 1300 x 2000 mm Z-axis clearance: from 400 mm Drive system: Servo drives with EtherCat protocol, X and Y axes with hardened and ground helical racks (accuracy class 6), Z axis with ballscrew (accuracy class 5) Linear bearings: Trapezoidal rails Traverse speed: up to 60 m/min Programmable resolution: up to 0.0001 mm Positioning accuracy: 0.01 mm Gantry drive: Dual-sided master/slave with gantry angle correction Electrospindle: Tilting/rotary head assembly, 17kW S6, A-axis range = ±185°, C-axis range = ±320°, Orbital K Plus PX-2 15/12 63F NC HSK63 for 5-axis machines Tool taper: HSK63F Max electrospindle speed: up to 24,000 rpm Construction: Welded, ribbed, stress-relieved, precision-machined steel Gedpfx Ahsvyrgqo Heiw Tool shank diameters: from 2 to 20 mm (option up to 26 mm) Brushless electrospindle: Yes Table type: Vacuum, pneumatic sections Optional equipment: - 3-position linear tool magazine - 16-position rotary tool changer with tool presence sensor - Positioning bases and vacuum blocks - Automatic central lubrication with grease - Pressure booster - Safety fence - Intelligent vacuum zoning - Wireless pendant - Tool length and diameter measuring sensor - Positioning laser #router #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #Steel #Aluminium #Aluminum #Brass #StainlessSteel #CastIron #Polypropylene #Polycarbonate #Acrylic #Fermacell

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, KELLENBERGER PRECISION UNIVERSAL CYLINDRICAL GRINDING MACHINE MODEL: 1000 U YEAR OF MANUFACTURE: 2000 PARTIAL OVERHAUL: 2026 Centre Height: 175 mm Grinding Length: 1000 mm Equipment: - Standard Accessories - Workpiece Spindle Head Standard MT5 with adapter flange DIN 55027, size 5 - Splash guard hood for above - Tailstock with micro-adjustment, MT4 - Internal grinding attachment with protective cover for grinding spindle D:80 mm for belt-driven spindles Gedpfxeyf E Suo Ah Heiw - FISCHER internal grinding spindle type HJN 842 incl. 4 grinding arbors (choice of 4 pieces) - HJNZ 42 chuck - Oil mist lubrication unit for HJN spindles - STREULI magnetic paper band filter system, type SPB 2 - Coolant supply through the workpiece spindle - HEIDENHAIN digital length measuring system on X and Z axis - Sine bar on workpiece spindle head incl. alignment arbor MT5 - Permanent magnetic chuck, D:200 mm - Three-jaw chuck, D:160 mm - Four-jaw chuck, D:160 mm - Collet chuck system for Schaublin collets B32 - Set of collets B32, D: 1.0–30.0 mm, increments of 0.5 mm (59 pieces) - Dial gauge stop for table swiveling, dial gauge 0.01 mm - Table fixed stop - Dressing stop for internal grinding - LED machine lamp - Various grinding wheel flanges, left (2 pieces) - Pneumatic table relief - Tilting dressing device for dressing during external, face or internal grinding - Set of vibration-damping pads - New three-color paintwork (light grey RAL 7035 / blue RAL 5012 / dark grey RAL 7016) - New acceptance protocol according to KELLENBERGER standard - Documentation - CE conformity Machine is currently being overhauled, the pictures shown are sample images!

Būklė: naujas, Gamybos metai: 2026, Technical Data: Control System: multi-axis real-time interpolator with active trajectory prediction, LAN and EtherCat communication, sampling time below 2 ms, correction map, RTCP, remote service access. Working Area: 2100 x 3100 mm (option: 2100 x 4100 mm) Z-axis Clearance: 100 – 300 mm Drive System: servo drives with EtherCat protocol; X, Y axes—hardened and ground helical racks, precision class 6; Z-axis—ball screw, precision class 5 Linear Bearings: trapezoidal rails Traverse Speed: up to 80 m/min Software Resolution: 0.0001 mm Positioning Accuracy: 0.01 mm Gantry Drive: dual-side master/slave with gantry angle correction Electrospindles: 8 kW to 36 kW, inverter driven Tool Taper: ISO30 or HSK63 ER32 Max. Spindle Speed: 24,000 rpm Construction: welded, ribbed, stress-relieved, precisely machined steel frame Table Type: vacuum Optional Equipment: - Material positioning and correction via camera, laser, or probe - Revolver tool magazine - Tool cooling with oil mist or chilled air - Laser or contact 3D scanner - Positioning stops - Drilling and angular aggregates - Active oscillating knife, rotary knife, drag knife, crease tool, pen, blade—electric or pneumatic - Chip extraction system Gedpfou U Hnajx Ah Heiw - Pneumatic sections - Printer, barcode reader - CAD/CAM software for furniture, cabinet, and front design - Automatic central lubrication #ploter #CNC #router #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #furnitureboard #Chipboard #steel #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #Fermacell #BLUM;

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, 5-AXIS MACHINING CENTER 2131, TRAVEL RANGE X, Y: 2100 X 3100 MM Z-AXIS RANGE 1000 MM FOR HEAVY 5-AXIS MACHINES HITECO 17KW S6 TILTING/ROTARY HEAD PACKAGE, AXIS RANGE A= ±185°, C= ±320°, ORBITAL K PLUS PX-2 15/12 63F NC HSK63 OMRON AC SERVO DRIVE PACKAGE OSAI OPENKEY INDUSTRIAL REAL-TIME CONTROL SYSTEM EUCHNER HBA-103037 HANDHELD OPERATOR PANEL CONTROL CABINET AIR CONDITIONING 18-STATION LINEAR TOOL MAGAZINE 16-STATION HSK63F TURRET TOOL MAGAZINE CORRECTION MAP RENISHAW TS27R TOOL MEASUREMENT PROBE SKF AUTOMATIC CENTRAL GREASE LUBRICATION SYSTEM #ploter #CNC #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #chipboard #steel #aluminium #aluminum Giodpfxeu U Hmpo Ah How #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell

Būklė: naudotas, Gamybos metai: 2022, valdiklių gamintojas: Siemens, valdiklio modelis: SINUMERIK 828D, Description: Working Area Max. turning diameter: 288 mm Max. machining length: 243 mm X-axis travel: 175 mm Z-axis travel: 350 mm Main Spindle Chuck diameter: 210 mm Max. bar capacity: 67 mm Spindle bore diameter: 76 mm Gijdpfjyavz Aex Ah How Drive power: 10.5 / 20 kW Max. torque: 213.7 Nm Max. speed: 4,500 rpm Tailstock Quill diameter: 65 mm Quill stroke: 80 mm Axial force: 4,312 N Centre taper: MT4 Tool Turret Number of tool stations: 12 Toolholder: BMT45 Driven tools: Yes Max. speed: 5,000 rpm

Būklė: labai geros būklės (naudotas), Automatic Filling System Logdos Späth GmbH Type K-DOS.F/AL 40/EX For filling liquids into buckets, hobbocks, IBCs, and drums ATEX certified (explosion-proof) Mobile, on castors/wheels Gedpfjiyytqsx Ah Heiw Compact dimensions: 3m x 2m x 2m (LxWxH) Programmable X/Y axis and palletizing pattern Very good condition, direct from production!

Būklė: naujas, Gamybos metai: 2023, ! Offers for customers from Baltic states only: Lithuania, Latvia, Estonia. Gjdpoixz H Eofx Ah Hsiw A robust servo-controlled hydraulic system offers precision and high reliability for consistently accurate bending results. Programming of parts is quick and easy with intuitive touch screen control. There are 4, 5 or 7 axis press brakes available. Working length varies from 2000 up to 4000 mm, and the pressing force from 500 up to 3200 kN. Available tooling styles for PPED press brake: LVD style, W style or Univeral. Pressing force: from 500 kN up to 3200 kN Working length: from 2000 mm up to 4000 kN

Būklė: naujas, Gamybos metai: 2025, AVEREX HS-540i GTS 2-APC, New machine Horizontal machining center with option for the adaptation of an optional pallet rotary magazine (6-APC or 8-APC) Standard Equipment - AVEREX MPro1 (FANUC 0i-MF Plus) - LCD color screen with 15" diagonal, MANUAL GUIDE i, QWERTY keyboard - iHMI – intelligent human-machine interface - Program memory with 2 MB (megabytes) and up to 1,000 programs - 4-axis simultaneous operation (X, Y, Z, B) - AICC II Control with look-ahead function reading 200 blocks in advance - HRV3+ servo drives (digital servo current control) - JERK control - Fine Surface Technology (high-speed, high-quality machining) - Extended workpiece coordinate system G54.1 P1 - P300 - Workpiece coordinate system G52 - G59 - Memory card slot (PCMCIA Flash-Card) and USB port - Network interface RJ45, embedded Ethernet - Enhanced embedded Ethernet functionality - Weekly timer: automatic power on/off of the machine - High-speed skip function - Tool offset memory C - 400 pairs of tool offsets - 1,000 storable programs - Programmable data input (G10) - Programmable spindle load monitoring M37/M38 - Tool life management - Extended macro variables (#100 - #199, #500 - #999) - Program restart - Helical interpolation - Cylindrical interpolation (G07) - Fixed cycles for drilling - Synchronous tapping (G84/G74) - Rigid tapping with bell-shaped acceleration/deceleration - Programmable mirroring and scaling - Polar coordinates programming (G15/G16) - Chamfering or rounding corners (,C / ,R) - Optional block skip function, up to 9 blocks - User-custom macro programming Travel - Axis travel X/Y/Z: 800/800/860 mm Speeds - Rapid traverse X/Y/Z: 74/74/74 m/min - Feed rate during milling: 0 – 40,000 mm/min - Rapid traverse B: 66.6 min-1 - 1G+ acceleration Pallet Changer - Rotary changer - Number of pallets 2-APC: 2 (machine / setup station) - Pallet size: 500 x 500 mm - Hole pattern: 5x 5 M16 x 25mm/deep, spacing 100 mm - Load capacity: 550 kg per pallet - Workpiece size 2-APC: Ø800 x H1,000 mm - Workpiece size 6-APC/8-APC: Ø800 x H900 mm - Mechanical locking of pallet clamping - Pallet clamping force: 9.8 kN x 4 cones (39.2 kN) - Pallet height from the floor: 1,100 mm - Standard preparation for retrofit with a 4-fold pallet magazine (HS-540i GTS 2-APC ==> 6-APC, 2 + 4 pallets) High-Speed Tool Changer - Tool holder: BBT-40 (opt. SK-40 DIN69871 or HSK-A63) - Magazine capacity: 80 tools - Max. tool diameter: Ø95 mm - Max. tool diameter with adjacent pockets empty: Ø185 mm - Max. tool length: 400 mm - Max. tool weight: 8 kg - Type: fixed location/random access - Speed: 16 sec. for 80 tools Gisdpswxdpgefx Ah Hjw - Tool change time: 0.9 sec./2.1 sec. (heavy tool) - Chip-to-chip time: 3.0 sec./3.5 sec. (heavy tool) Spindle Rotary Axis - Manufacturer: PARKSON™ - Axis: full-featured 4th axis - Max. rotation: 66.6 rpm - Indexing: 0.001° - Clamping torque: 5,000 Nm - Holding torque: 1,973 Nm Linear Guides - Manufacturer: THK™ - Width: 45 mm - Guide carriages X/Y/Z: 190 x 120 / 120 x 70 / 154 x 86 mm Ball Screw Coolant, chip, and compressed air management

Būklė: naudotas, Gamybos metai: 2007, valdiklių gamintojas: Siemens, valdiklio modelis: 840 D, Description: General: Year of manufacture: 2007 Control: Siemens 840 D Bar capacity: 65 mm Turning diameter: 250 mm Turning length: 650 mm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35 kW Max. torque: 370 Nm C-axis: 0.001° Bar capacity: 65 mm Chuck: Hainbuch Spanntop size 65 Chuck cylinder: Hollow clamping cylinder Sub spindle: Technology: Motor spindle Speed: 5,000 rpm Power: 26 kW Torque: 290 Nm C-axis: 0.001° Chuck: Hainbuch Spanntop size 65 Gsdpoyamfljfx Ah Hjiw Chuck cylinder: Partial hollow clamping cylinder Z-axis: 670 mm X-axis: 175 mm Tool turret I (X/Y/Z): Technology: Tool turret, 12 stations Tool holder: VDI 30 Driven tooling: 4,000 rpm, 11 kW, 28 Nm X-axis: 300 mm Y-axis: 80 mm (+/- 40 mm) Z-axis: 650 mm Tool turret II (X/Z): Technology: Tool turret, 12 stations Tool holder: VDI 30 Driven tooling: 4,000 rpm, 11 kW, 28 Nm X-axis: 180 mm Z-axis: 650 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system (IKZ) Measuring systems: Direct measuring systems in all X-axes (glass scales) Bar loader: IRCO Breuning Parts removal: Finished parts gripper + transfer conveyor Emulsion mist separator: Mechanical Setup mode: Electronic handwheel

Būklė: naujas, Gamybos metai: 2026, Industrial metal lathe CORMAK TORNADO 460x2000 Key advantages: - Versatile applications: The lathe is perfectly suited for a wide range of tasks, such as turning internal and external surfaces, taper turning, metric, inch, module and DP threading, polishing, drilling, and broaching. - Robust construction: The 300 mm wide cast iron bed is hardened and precisely ground, ensuring high vibration dampening and stable working conditions even under heavy loads. - Digital precision: The machine is equipped with digital readout on two axes (longitudinal and cross), displaying precise movement values on the screen via optical linear scales. - High-quality spindle: The reinforced bearing system in the spindle and a large 82 mm bore provide optimal performance during operation. The package also includes a 250 mm 3-jaw chuck, a 320 mm 4-jaw chuck, and a 5.5 kW motor. - Efficiency and productivity: Rapid traverse system on the longitudinal and cross feed via joystick significantly reduces machining time, while hardened and ground gears in the spindle gearbox ensure durability and reliability for years. - Broad threading capabilities: Thanks to threading functions (metric, inch, module, and DP), right- and left-handed threading, and the ability to change parameters without replacing gears, work becomes faster and easier. Supported thread ranges include, among others, metric (41) from 0.1 to 14 mm, inch (60) from 2 to 112 TPI, module (34) from 0.1 to 7 M.P., and DP (50) from 4 to 112 D.P. - Precise thread counting: The lathe is equipped with a thread-cutting dial indicator, allowing quick repositioning of the carriage after disengaging the leadscrew nut. - Ergonomics and user-friendliness: An intuitive control panel on the gearbox enables quick adjustment of spindle speed and automatic feed. - Large workpiece machining: A removable bed gap allows turning of large workpieces up to 690 mm in diameter and 240 mm in length (with the gap removed), broadening the machine’s application range. Technical specifications: Swing over bed: ø460 mm Swing over cross slide: ø274 mm Swing in gap diameter x width: 690 mm x 240 mm Center height: 230 mm Distance between centers: 2000 mm Gsdpfx Asv E Eiijh Hoiw Bed width: 300 mm Maximum tool size: 25 x 25 mm Total cross slide travel: 290 mm Total top slide travel: 120 mm Spindle bore diameter: ø82 mm Spindle nose: D1-8 Spindle taper (socket): ø90 (1:20) Spindle speed steps: 12 Spindle speed range: 25-2000 rpm Lead screw diameter and pitch: ø35 mm x 6 mm Inch threads: 2-112 TPI (60) Metric threads: 0.1-14 mm (41) DP gears: 4-112 D.P. (50) Module gears: 0.1-7 M.P. (34) Longitudinal feed: 0.031-1.7 mm/rev (42) Cross feed: 0.014-0.784 mm (42) Quill travel (tailstock): 120 mm Tailstock quill diameter: ø60 mm Tailstock taper: MT no. 4 Spindle drive motor: 5.5 kW Coolant pump motor: 0.09 kW Machine dimensions (LxWxH): 3220x1040x1340 mm Weight: 2785 kg

Būklė: naujas, Gamybos metai: 2026, The WP300 self-centering three-jaw chuck is a specialized accessory designed for clamping pipes and workpieces with cylindrical or hexagonal cross-sections in welding positioners and rotary welding tables. Thanks to its precise, self-centering clamping mechanism, it ensures secure and accurate workpiece positioning during rotation, which translates into higher weld quality and repeatability throughout the welding process. Key advantages of the WP300 chuck: - Precise self-centering mechanism – enables quick and accurate centering of pipes and components, eliminating the need for manual positioning. - High versatility – compatible with a wide range of welding rotators and positioners, including models PS310, PS320, and PS360. - Stable clamping – the three independent jaws ensure the workpiece remains firmly clamped even at high rotational speeds. - Robust construction – manufactured from high-grade materials resistant to vibration, heavy loads, and harsh welding environments. - Optimal working diameter – the capability to clamp pipes up to 270 mm in diameter allows for a broad scope of applications. Design and technology The WP300 model features a compact and durable steel construction suited for intensive use. The three-jaw mechanism operates synchronously, automatically positioning the workpiece along the axis of rotation. The large external diameter (300 mm) and through-hole (100 mm) enable accommodation of a wide range of component sizes. The mounting holes are designed for full compatibility with CORMAK-brand welding positioners. Accuracy and operational efficiency Gedpfx Aoycqptsh Hsiw The WP300 chuck provides high repeatability of clamping, ensuring precision in circumferential welding. It reduces workpiece setup time and minimizes alignment errors, boosting production efficiency and operator safety. Its robust build guarantees operational stability even under dynamic loads. Applications The WP300 chuck is intended for use in circumferential welding processes, especially in manufacturing plants, metal workshops, and companies specializing in the prefabrication of steel components. It is suitable for use in welding rotators and positioners, enhancing their functionality and versatility. Technical data: - Max. pipe diameter: 270 mm - Outer diameter: 300 mm - Inner diameter: 100 mm - Mounting hole spacing: 105 mm - Bolt hole diameter: 9 mm - For welding positioners: PS310, PS320, PS360 - Weight: 14 kg

Būklė: naujas, Gamybos metai: 2026, The WP200 self-centering three-jaw chuck is a professional accessory designed for use with welding positioners and welding turntables, such as the PS310 and PS320 models. Its precise clamping mechanism enables quick, stable, and concentric mounting of pipes and workpieces with cylindrical or hexagonal profiles, significantly enhancing the efficiency and safety of circumferential welding processes. Key advantages of the WP200 chuck: - Self-centering three-jaw mechanism – ensures uniform and stable clamping of components, regardless of shape. - Versatility – compatible with most welding turntables and welding positioners, including CORMAK PS310 and PS320. - Precision clamping – ensures an ideal fit for workpieces, resulting in higher weld quality and stable rotation. - Durable construction – robust, compact body made from high-grade materials resistant to heavy mechanical and thermal loads. - Compact dimensions and easy installation – low weight and precise hole spacing allow for quick integration with welding equipment. Design and technology: The WP200 chuck is equipped with three high-quality jaws whose design allows for rapid and automatic centering of the workpiece along the axis of rotation. The external diameter of 200 mm and internal diameter of 80 mm permit gripping of components up to a maximum diameter of 170 mm. The body is made from premium-grade steel, guaranteeing resistance to deformation during extended operation. Precision and operational efficiency: The self-centering three-jaw mechanism of the WP200 chuck significantly reduces setup time for welding. Minimizing backlash and eliminating positioning errors directly contribute to enhanced quality of circumferential welds. Secure clamping also provides greater operator safety. Applications: The WP200 chuck is intended for use with welding turntables, welding rotators, and welding positioners for processes involving pipes, flanges, rings, and cylindrical components. It is ideally suited for welding shops, manufacturing facilities, and steel fabrication industries. Technical specifications: Maximum pipe diameter: 170 mm External diameter: 200 mm Giodpfx Aeycqnveh Hjw Internal diameter: 80 mm Mounting hole spacing: 85 mm Mounting hole diameter: 9 mm For welding positioner: PS310, PS320 Weight: 10 kg

Būklė: naujas, Features > 5-axis simultaneous CNC machine > Polymer concrete base frame > Wet/dry machining > Workpiece zero-point clamping system > Servo drives with absolute encoder > Integrated control unit with touchscreen Options > Machine base frame > Various zero-point clamping devices: T-slot plate, four-jaw chuck, precision vise, and blank holder > Automatic loading and unloading system Gedpfxshqhkio Ah Heiw > 3D touch probe > Why buy? Easy financing available. Contact us! The iMG 1010 is a compact solution for machining workpieces up to 100x100x100 mm. With its polymer concrete base, it enables precise machining of numerous materials such as titanium, steel, CoCr, ceramics, sapphire, zirconia, or aluminum. Particularly noteworthy is the Y-axis arrangement, which, thanks to its installation positions, ensures high stability and excellent vibration damping. Nearly any position on the workpiece can be reached without reclamping. The selection of workpiece clamping devices and holders, in conjunction with the zero-point clamping system, makes the machine a versatile machining center. Its design allows for both wet and dry machining without time-consuming conversions. The CNC machine can be optionally equipped with a loading and unloading system, which can access the working area from the right, left, or top, allowing for automated workpiece changes. The zero-point clamping system serves as an interface and ensures exact and repeatable positioning of the workpiece. Via software interfaces, the system can be integrated into network-controlled, automated production processes. The maintenance-friendly construction and durable direct-drive spindles help save service costs and time, providing a reliable machining system. During the design phase, great care was taken to ensure all components are easily accessible while remaining protected from external influences, guaranteeing a long service life. The advanced system offers numerous expansion possibilities.

Būklė: naujas, mašinos/transporto priemonės numeris: 246203 xxxx, Funkcionalumas: visiškai funkcionalus, Model Building Gantry Milling Machine – The Ideal Platform for Constructing CNC Machines and Applications. The FB2 flatbed unit is an excellent entry point into CNC technology and is perfectly suited for model making and hobby applications. The FB2 is also frequently used in industry for measurement and dosing technology, as it offers extensive expansion options. Additionally, the unit is compatible with the isel modular system. Various sizes with travel ranges from 530 x 500 mm up to 1030 x 1250 mm, as well as extensions like subframes and enclosures, are available and can be individually configured. PERFECTLY SUITED FOR: • Ideal for laboratory, model making, and workshop applications • Assembly and mounting • Printing and engraving • Drilling and milling • Dispensing and screwing • Molding and modeling • Gluing and potting • Soldering and welding • Measuring and testing • Sawing and cutting, etc. Z-clearance = 190 mm (Z-clearance = 300 and 500 mm on request!) FEATURES: • Long-life stepper motors in the 200W range • Equipped with reliable LES drives with precision steel ball screws • Workpiece clamping via T-slot table • Available with or without safety enclosure • Variable gantry clearances to suit customer applications OPTIONS: • iFM or UFM spindle motor • Coolant spray unit • Cool-Min cold air cooling • Automatic tool length measurement • Rotary axes • Workpiece clamping systems (toggle clamps, vacuum tables, etc.) • Extraction systems Gsdpfehqmamex Ah Hoiw • LED machine room lighting • RAL color selection • CAD/CAM software • Gantry clearance 190 mm, 300 mm, or 500 mm • High-performance 4-axis control unit • Subframe • Enclosure with sliding/folding door

Būklė: naujas, mašinos/transporto priemonės numeris: 280270 0001, ADVANTAGES: - Compact tabletop machine - Easy to operate - 3-axis stepper motor control with path operation - Ball screw drives - 2-phase stepper motors - Includes CNC control software iCP4030P – with stepper motor drive and path control GENERAL The CNC machines of the iCP series are further developments of the proven CPM series. The introduction of a sliding door now allows the machines to be operated while seated, which, among other benefits, results in shorter cycle times when opening the hood. The chassis is fully bolted rather than welded like previous models. This provides greater assembly precision and improved serviceability. Furthermore, the resonance and vibration behavior has been optimized, resulting in reduced noise. X = 400 mm Y = 300 mm Z = 140 mm Clearance = 200 mm - In use for over 40 years! - Over 20,000 systems sold HIGHLIGHTS - Compact tabletop machine - Easy to operate - 3-axis stepper motor control with path operation - Ball screw drives - 2-phase stepper motors - Includes CNC control software - Mosaic safety circuit POPULAR MATERIALS - Foam - Plastics ACCESSORIES Gisdelkbpzepfx Ah Hjw - Length measuring probe - Spindles (iFM1000ER, iFM1000WS) - Quick-clamping system - Collets - Extraction unit

Būklė: naujas, Portal Machine – The Space Miracle! CNC Gantry Milling Machine for large travel distances with minimal space requirements! ADVANTAGES: • Optimal space utilization, completely unobstructed clamping surface • Maximum chip protection thanks to overhead axes • Particularly suitable for tall and bulky components FEATURES: - Gantry function on Y-axis (synchronized via ProNC software) - CAN bus system with EC servo motors on all axes - Backlash-free adjusted steel ball screws with steel linear guides - T-slot table for easy clamping of workpieces and accessories - Clamping surface from 1100x1000 to 1750x2000 mm - Variable pass-through from 340 mm to 590 mm - Spindle motors: iSA 500 / 750 / 1500 / 1500L as well as iSA 900 / 1500W / 1500WL / 2200 - Speed: up to 250 mm/sec possible - PILZ safety technology - Effortless operation via height-adjustable CNC panel - Network-capable control PC with Windows - Parallel sliding door - Clamping of workpieces via T-slot plate - Variable gantry clearance, tailored to customer requirements CONSTRUCTION: Gantry: movable, Table: stationary FIELDS OF APPLICATION: • Machining • Measuring and testing • Dispensing applications FOR PROCESSING: • Aluminum / light metals • Machining plastics • Ceramics • Non-ferrous metals (brass, bronze, etc.) Gijdpfx Aohqhlvoh Hjw • Plastics • Wood Optimal space utilization with minimal footprint. Do you have limited space but still require maximum travel? We have the solution for you. Our Overhead machine series offer maximum travel distances with a compact footprint. All drives are located in the upper area of the machine, leaving the entire machine table free for your individual applications. Thanks to a wide range of variable features and additional options, the CNC machine can be optimally configured for many industries and fields. Application possibilities for the OverHead Gantry M include not only machining but also measuring, testing, and dispensing applications. With a milling motor power of up to 2.2 kW and 20,000 rpm as well as travel speeds up to 250 mm/sec, it is suitable for machining wood and plastics as well as light and non-ferrous metals. The open working area and excellent price/performance ratio offer key advantages over comparable products. The OverHead Gantry M is available in five different sizes for various travel ranges from M20 to M50. Need the control cabinet on the right or prefer the operator unit on the left? No problem – we are happy to accommodate your preferences and, of course, take care of maintenance and support for your OverHead Gantry M. Our service technicians are available by phone and can quickly be on site if required. Additionally, we offer our in-house software isy-CAM 2.8 and provide consultation for your specific application. Many options available on request!

Būklė: naujas, mašinos/transporto priemonės numeris: 280261 0001, Features > CNC machine ready for mains connection > Low-noise operation thanks to maintenance-free servomotors > Ergonomically slim design > Powerful isel control system with maintenance-free servomotors > Reliable linear units with steel ball screws used for drive systems > Easy operation via height-adjustable display > Network-enabled control PC with WINDOWS > User-friendly Soft-Lift hood > Workpieces clamped using T-slot table Options > Milling spindle 500W – 1200W > Linear tool change station > Tool cooling as spray-mist or air version (CoolMin) > Length measuring probe > Vacuum clamping table > Maintenance unit with valve manifold > Support table with swivel monitor and integrated keyboard > Support table serves for installation of vacuum pump, cooling device and other peripheral equipment > Automatic hood opening > Safety light curtain Giodpfslnikkex Ah Hsw > Why buy? Simple financing. Contact us! The iCV 4030 EC is a compact benchtop machine with a proven, optimised chassis design. An optional practical support table with monitor and integrated keyboard is available. The CNC machine is modular; all control components, including the isel CNC controller and control computer, are installed at the rear and are easily accessible for maintenance. All linear axes installed in the machine are from the isel range; they run with linear ball bearings on ground precision steel shafts. Zero-backlash ball screw drives with various leads are used as drives. The machine table, made from milled T-slot profiles, offers versatile clamping options for custom workpiece holders and fixtures. The iCV 4030 EC is suitable for numerous applications and industries; it is typically preferred for machining operations. A wide range of accessories tailored to your application complements the product line.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The machine is on display. Optiturn L34 HS CNC lathe – direct from the manufacturer. L34 HS – The OPTIMUM CNC lathe with Siemens SINUMERIK 808D Advanced PPU 150 control system. - Reinforced machine bed made of cast iron - Sophisticated spindle bearing - Emergency stop impact switch - Centralized lubrication - Spindle and feed motors by Siemens - Maintenance-friendly safety enclosure - Rear access panel for service and maintenance - Safety switch on the front sliding door - Turret positioned behind the turning center (left-handed turning tools) - Linear guideways - Includes “SINUMERIK 808D on PC” software package (practical training software for offline programming and simulation of workpieces on PC; free to download) Technical specifications Electrical connection: 400 V / 3 ph ~ 50 Hz Total connected load: 6.5 kVA Spindle - Drive motor (S1 operation): 3.7 kW - Drive motor torque (S1 operation): 23.6 Nm - Torque at spindle: 40 Nm - Spindle nose: DIN 6350 A2-3 - Spindle bore diameter: Ø 46 mm Coolant system - Coolant pump power: 95 W - Tank capacity: 75 liters Machine data - Center height: 165 mm - Center width: 600 mm - Swing over cross slide: Ø 146 mm - Swing over bed: Ø 350 mm Speed range - Spindle speeds*: 30 – 3,500 rpm Tool turret - Type: Electric - Number of tool stations: 6 tools - Toolholder height/width (square max.): 16 mm - Maximum boring bar diameter: 16 mm Accuracy - Repeatability: ± 0.01 mm - Positioning accuracy: ± 0.01 mm Giodozi Evgjpfx Ah Hew Travel - X-axis: 145 mm - Z-axis: 465 mm Feed rate - X-axis: 6,000 mm/min - Z-axis: 8,000 mm/min Machine leasing available through Siemens Finance. Subject to credit approval.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Machine is on display. Optiturn L28 HS CNC lathe – direct from the manufacturer. L28 HS – The OPTIMUM CNC lathe featuring Siemens SINUMERIK 808D Advanced PPU 150 control. - Reinforced machine bed made of cast iron - High-performance spindle bearing assembly - Emergency stop impact switch - Central lubrication system - Reference switch - Maintenance-friendly safety enclosure - Rear access panel for maintenance - Safety switch on the front sliding door - Turret mounted behind the turning centre (left-hand turning tools) - Linear guideways - Software package "SINUMERIK 808D on PC" included (practical training software for offline programming and simulation of workpieces at the PC, free to download) - Two years SIEMENS warranty included Technical Specifications Electrical Connection: 400 V / 3 Ph ~50 Hz Total Connected Load: 3.75 kVA Spindle Drive Motor (S1 Operation): 2.2 kW Drive Motor Torque (S1 Operation): 14 Nm Spindle Torque: 28 Nm Spindle Mount: DIN 6350 A2-3 Spindle Taper: 5C Spindle Bore: Ø 30 mm Coolant System Coolant Pump Power: 95 W Tank Capacity: 25 litres Godpfxjzi Er Io Ah Hoiw Machine Data Centre Height: 169 mm Centre Distance: 430 mm Swing Diameter over Cross Slide: Ø 200 mm Swing Diameter over Bed: Ø 300 mm Speed Range Spindle Speeds*: 40 – 4,000 rpm Tool Turret Type: Electric Number of Tool Stations: 6 tools Square Tool Shank Size (max.): 16 mm Boring Bar Diameter (max.): 16 mm Accuracy Repeatability: ± 0.01 mm Positioning Accuracy: ± 0.01 mm Travels X-Axis: 145 mm Z-Axis: 465 mm Feed Rate X-Axis: 10,000 mm/min Z-Axis: 12,000 mm/min Machine leasing available through Siemens Finance. Sufficient liquidity required.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 3 300 mm, bendras aukštis: 2 500 mm, bendras plotis: 1 650 mm, bendras svoris: 9 600 kg, produkto aukštis (maks.): 455 mm, padavimo jėga X ašis: 600 N, padavimo ilgis X ašis: 180 mm, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, garantijos trukmė: 12 mėnesiai, # Hydraulic CNC Servo Press Brake MTP 160x3200 The hydraulic CNC servo press brake MTP 160x3200 is a state-of-the-art machine for precise bending of steel, stainless steel, and aluminum sheets. With a pressing force of 160 tons and a bending length of 3200 mm, it is suitable for both series production and single-part manufacturing. The machine is equipped with the MTP-3212 CNC control system and four CNC-controlled axes (Y1, Y2, X, R). This ensures high precision, repeat accuracy, and fast positioning. The user-friendly control unit with a large color touchscreen allows for easy programming, automatic calculation of bending parameters, as well as storage of programs and tooling data. Gsdpozcmrdofx Ah Hjiw The press brake features high-quality components from renowned manufacturers, including a Rexroth hydraulic system, Schneider Electric components, and Omron safety elements. Steel hydraulic pipes increase reliability and minimize the risk of leaks. For maximum operator comfort, the machine is equipped with a mobile control panel, two front sheet supports, and LED workspace lighting. Safety is ensured by a light barrier, side guards, a rear safety enclosure, and easily accessible emergency stop switches. The machine comes with a CE declaration of conformity and an operating manual. ## Technical Data * Pressing force: 160 t * Maximum bending length: 3200 mm * Maximum sheet thickness: up to 8 mm * Control unit: MTP-3212 CNC * Number of CNC axes: 4 (Y1, Y2, X, R) * Distance between uprights: 2600 mm * Throat depth: 320 mm * Ram stroke: 180 mm * Maximum open height: 455 mm * Backgauge stroke (X-axis): 600 mm * Tool clamping: AMADA quick clamping system * Motor power: 11 kW * Power supply: 400 V / 50 Hz * Dimensions (L × W × H): 3300 × 1650 × 2500 mm * Weight: 9600 kg ## Additional Information * Professional technical support included * Assistance with tool selection and bending parameters * CE declaration of conformity included * Operating manual included * Spare parts supply during and after the warranty period * Option to extend warranty after the standard warranty expires The machine is sold on an EXW (Ex Works) basis. Upon request, we can organize transport, and transport costs can be calculated separately according to the delivery location. Our team is happy to provide you with a competitive transportation quote for deliveries within Europe and worldwide. For more information about our company, our machines, and services, please visit our website. Metal Technics Polska is a reliable supplier of industrial machinery, offering professional sales advice, technical support, spare parts supply, and comprehensive customer service to clients across Europe.