Krumpliapjovimo staklės
Pfauter PE 800

Name: Pfauter PE 800
Brand: Pfauter
Availability: InStock

Gamybos metai

1995

Būklė

Naudotas (visiškai funkcionalus)

Vieta

Sankt Leon-Rot Vokietija

Duomenys apie mašiną

Mašinos pavadinimas:: Krumpliapjovimo staklės

Gamintojas:: Pfauter

modelis:: PE 800

Gamybos metai:: 1995

Būklė:: geras (naudotas)

Funkcionalumas:: visiškai funkcionalus

Kaina ir vieta

Vieta:: Lanzstraße 6, 68789 Sankt Leon-Rot, Deutschland

Skambinti

Pasiūlymo informacija

Skelbimo ID:: A21795163

Atnaujinimas:: paskutinį kartą atnaujinta 04.06.2026

aprašymas

The perfect retrofit machine! Mechanically in outstanding condition!

This machine can be inspected under power until 12.05.2026 and will then be dismantled due to space constraints. Please find attached the current KLINGELNBERG measurement protocols available for download.

Gleason P 800
Year of manufacture: 1995
Control system: SIEMENS 840 C (discontinued)
Condition: mechanically in very good condition
Function: fully operational
Inspection: possible under power

Technical Data:
- Nominal workpiece diameter: 800 mm
- Maximum workpiece diameter: 800 mm
- Maximum workpiece diameter, special design: 1,200 mm
- Nominal module: 20 / 30 mm
- Nominal module, special design: 25 / 35 mm
- Drive power: 35 kW
- Drive power, special design: 52 kW
- Cutter head speed range: 20 - 200 rpm
- Cutter head speed range, special design: 26 - 265 rpm
- Additional cutter head speed range, special design: 36 - 360 rpm
- Cutter head swivel range: +30 / -45 degrees
- Cutter head dimensions (standard), diameter/length: 350 / 375 mm
- Workpiece/tool center distance min./max.: 50 / 600 mm
- Workpiece/tool center distance, special design: 50 / 800 mm
- Max. axial slide travel: 700 mm
- Max. axial slide travel, special design: 1,000 mm
- Max. axial slide travel, special design: 1,300 mm
- Lowest cutter head position above table: 450 mm
- Table diameter: 800 mm
- Diameter of table bore: 245 mm
- Table bore depth: 875 mm
- Max. table speed: 15 rpm
- Max. table load: 10,000 kg
Dedpfxsy Hfm Ns An Hoch

Machine dimensions:
- Width A: 5,800 mm
- Length B: 6,900 mm
- Height C: 4,700 mm
- Machine weight: 22,000 kg

Comments on the values of the current KLINGELNBERG measurement protocols for the gears BEFORE the grinding process:

"Pitch and flank form show no irregularities. For the profile, a borderline or slightly out-of-tolerance fHα deviation was detected in one measurement. Please check whether this value is acceptable according to the drawing/customer release, or whether a correction or rework is required. The gears were always transferred to the RZ 1000 REISHAUER for grinding accordingly. Overhaul of the C-axis is still recommended. A cost estimate from GLEASON PFAUTER LUDWIGSBURG is available for this, amounting to 10,000 EUR."

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.

Dokumentai

21795163-01.pdf
21795163-02.pdf

Tiekėjas

Registruotas nuo: 2011

22 Skelbimai internetu

Skambinti

Siųsti užklausą

Telefonas & Faksas

+49 6227 ... skelbimai

Šie skelbimai taip pat gali jus sudominti.

Mažas skelbimas

Krumpliaračių formavimo staklės LORENZ SN 8 / 630

Offenbach an der Queich

1 256 km

Krumpliaračių formavimo staklės
LORENZSN 8 / 630

Skambinti

Būklė: geras (naudotas), Gamybos metai: 1975, Ratų skersmuo - maks. 630 mm y eiga 560 mm Ratų plotis 180 mm Modulis - maks. 8 Modulis - min. 1 Rušinys diametras 750 mm Stalo skersmuo 450 mm Tvirtinimo ašies skersmuo 58 mm Špindelio eiga 200 mm Reguliavimo diapazonas 230 mm Atstumas tarp špindelio ir stalo 225–450 mm Tvirtinimo kūgis Morse 4 Giluminis padavimas 0,03 mm/eiga Pjovimo padavimas 10n: 0,18–0,74 mm/eiga Eigos dažnis 12n: 47–300 eiga/min Elektrinė versija – Įtampa/Dažnis 380/50 V/Hz Mašinos svoris apyt. 5500 kg Mašina buvo pakelta 100 mm. Dodpeyb Sx Tjfx An Hjch

Peržiūrėti detales

Mažas skelbimas

Metzingen

1 242 km

Matavimo mašina
WENZELLH 108 CNC

Skambinti

Gamybos metai: 2000, būklė: naudotas, x-travel 1000 mm y-travel 1600 mm z-travel 800 mm Control: WENZEL WPC 2040/FW31.351 Total power requirement: kW (not specified) Machine weight approx. 5500 kg Space requirement approx.: m (not specified) WENZEL CNC-controlled vertical 3-D coordinate measuring machine Model: LH 108 CNC Year of manufacture: 2000, but continuously serviced and calibrated by manufacturer Dcjdot Hw Nyjpfx An Heh Axis configuration: - Y-axis as long-travel measuring bridge: 1,600 mm - X-axis as measuring head carriage (cross travel): 1,000 mm - Z-axis as vertical measuring quill: approx. 800 mm Maximum workpiece weight / table load: approx. 2,250 kg Clearance under measuring bridge: approx. 900/1000 mm Overall table size: approx. 2,600 x 1,250 mm Table height above floor: approx. 700 mm Table plate thickness: 380 mm Machine height: approx. 3,100 mm Weight: approx. 5,500 kg Special Features / Accessories: • Measuring table, crossbeam, and quill made from dark natural hard stone; table with 6 x 9 threaded holes for workpiece/fixture clamping • All axes are air-bearing for smooth, virtually wear-free operation; equipped with incremental scales, 0.0005 mm resolution • WENZEL CNC control type WPC 2040 / FW31.351 built into worktable (controller replaced approx. 3 years ago) • WENZEL measurement software METROSOFT QUARTIS R 12 SP 1 with SurfPro package and QUARTIS Q-DAS • RENISHAW motorized rotary and swivel head (automatically indexable in 7.5° increments), probe head model PH 10 M plus, with TP 20 probe and various probe accessories • RENISHAW probe head controller unit type PHC 10 C-3 plus, also built into the worktable • Automatic probe changer, 6-position probe magazine model MCR 20 mounted on the table • Mobile hand control panel with progressive control lever (joystick) for manual adjustment of all 3 axes with infinitely variable travel speeds • Sphere standards for table setup, work table, various clamping devices, etc. Condition: Very good – generally in stock, powered for inspection. Ready for demonstration. Disassembled by a CMM specialist at the seller and reassembled here. Delivery: Ex-stock – as is, as inspected Payment: strictly net – upon receipt of invoice.

Peržiūrėti detales

Mažas skelbimas

Metzingen

1 242 km

Pavarų formavimo staklės
LORENZLS 400

Skambinti

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Dcedot Hww Dspfx An Heh Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Peržiūrėti detales

Mažas skelbimas

Vertikalios krumpliaračių frezavimo staklės GLEASON- PFAUTER P 2400/2800

Vokietija

999 km

Vertikalios krumpliaračių frezavimo staklės
GLEASON- PFAUTERP 2400/2800

Skambinti

Būklė: naudotas, Gamybos metai: 2008, Siemens 840D Control Gear Hobbing Machines for Large Gears Dedowzypnopfx An Hjch Flexible and universal gear hobbing of gears Large hobbing machines from Gleason deliver maximum productivity for roughing and finishing cylindrical gears applied across numerous industries: wind turbines, industrial gear units, mining and shipbuilding, gear production, and many others. The guideways are wide and equipped with hydraulically preloaded guides, which in combination with a separate linear guide and backlash-free rollers, ensure precise carriage movements at any feed rate. The table design provides optimal conditions for absorbing and transferring cutting forces to the machine base. The use of hydrostatic table bearings, in conjunction with the proven backlash-free double worm gear drive, guarantees precise table motion as well as the highest flatness and concentricity accuracy of the worktable. This holds true regardless of substantial fluctuations in workpiece weight and/or high machining forces. The motorized hobbing heads for external and internal gearing are tailored to the requirements of modern cutting tools. All machine sizes can be equipped with both external and internal hobbing heads. The drive's performance range takes into account future tool developments. Naturally, the hobbing head drive is also backlash-free. These machines are particularly well-suited for the use of state-of-the-art cutting tool materials, regardless of whether dry or wet machining is preferred.

Peržiūrėti detales

Mažas skelbimas

Spiralinių kūginių krumpliaračių pjovimo staklės KLINGELNBERG C 28 P

München

1 152 km

Spiralinių kūginių krumpliaračių pjovimo staklės
KLINGELNBERGC 28 P

Skambinti

Mažas skelbimas

Ritinio Išlyginimas DREHER 1645-AV Modell 738

Eislingen/Fils

1 206 km

Ritinio Išlyginimas
DREHER1645-AV Modell 738

Skambinti

Būklė: naudotas, Gamybos metai: 1980, mašinos/transporto priemonės numeris: A-07/471A, Sheet width - max.: 130 mm Straightening roll diameter: 40 mm Number of straightening rolls: 5 Draw rolls: 2+2 Sheet thickness - min.: 0.4 mm Sheet thickness - max.: 3.5 mm Weight: 0.4 t Space requirement approx.: 0.6x0.65x1.15 m Dcsdpocxxx Refx An Hoh Strip straightening machine with integrated steplessly adjustable VARI drive, forward and reverse operation, mode selector switch for manual and automatic, entry roller basket, position display for straightening rolls via analog display, adjustment of straightening roll positions via handwheels, automatic loop control, very good condition

Peržiūrėti detales

Mažas skelbimas

Žuvų kaulų pavaros generatorius MDV 2000 1 Mai MDV 2000

București

1 212 km

Žuvų kaulų pavaros generatorius MDV 2000
1 MaiMDV 2000

Skambinti

Mažas skelbimas

Pavarų formavimo staklės PFAUTER PSA 300

Malsch

1 270 km

Pavarų formavimo staklės
PFAUTERPSA 300

Skambinti

Būklė: geras (naudotas), Gamybos metai: 1998, Max. pitch circle diameter external gearing: 300 mm Max. pitch circle diameter internal gearing: 300 mm Max. outside diameter of workpiece (equipment): 450 mm Module – max.: 6 Gear width – max.: 100 mm Max. helix angle (with tool Ø 125 mm): +/- 45° Stroke rate – infinitely variable: 130 – 1300 strokes/min Workpiece weight: 1000 kg Minimum distance table surface – tool spindle: -55 / +300 mm Maximum distance table surface – tool spindle: 200 mm Maximum distance table surface – tool spindle: 350 mm Manual column side shift: +/- 25 mm Manual tool spindle swivel angle: +/- 0.5° Max. tool rotation speed: 15 rpm Max. workpiece rotation speed: 27 rpm Max. tool diameter: 7 inches Voltage: 400 V Frequency: 50 Hz Max. line current: 70 A Total power requirement: 48 kW Machine weight: approx. 11 t Space requirement: approx. 4.27 x 3.11 x 2.87 m Main spindle taper: SK 45 Table bore: 40 mm Control: Siemens Sinumerik 840 C Gear shaping machine Gleason PFAUTER Mod. PSA 300 The CNC modular gear shaping machine with shaping cutter is designed for machining external and internal cylindrical gears with straight or helical involute toothing, as well as any other profile obtainable by generating or slotting methods. The working cycle is controlled by a CNC unit with dedicated software for gear machining. Field of application --> The PSA 300 is designed for manufacturing: - Gears with straight external teeth Dsdpfxsvu E Nuo An Hoch - Gears with straight internal teeth - Gears with external helical teeth - Gears with internal helical teeth

Peržiūrėti detales

Mažas skelbimas

Tekinimo-frezavimo centras OKUMA Multus B400 OKUMA Multus B400

Saint-Genix-les-Villages

1 669 km

Tekinimo-frezavimo centras OKUMA Multus B400
OKUMAMultus B400

Skambinti

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 710 mm, tekėjimo skersmuo: 710 mm, ašies variklio galia: 11 000 W, veleno greitis (min.): 38 aps./min, veleno greitis (maks.): 3 800 aps./min, X ašies eiga: 690 mm, Y ašies eiga: 115 mm, Z ašies eigos atstumas: 1 545 mm, greitas poslinkis X ašimi: 4 m/min, greitas poslinkis Y ašis: 26 m/min, greitasis eiga Z ašyje: 40 m/min, sukimosi greitis (maks.): 6 000 aps./min, įvesties srovės tipas: trifazis, veleno nosis: JIS A2-8, bendras svoris: 14 000 kg, įrankio ilgis: 300 mm, įrankio svoris: 10 g, W ašies eiga: 1 550 mm, Įranga: dokumentacija / vadovas, Dreh-Fräszentrum OKUMA Multus B400 TECHNISCHE DATEN: CNC-Steuerung: OSP-P200L Spitzenweite: 1500 mm Max. Drehdurchmesser: 710 mm Spitzenhöhe über Bett: 710 mm Verfahrweg X-Achse: 690 mm Verfahrweg Y-Achse: -115 / +115 mm Verfahrweg Z-Achse: 1545 mm Verfahrweg W-Achse: 1550 mm B-Achse Indexiergenauigkeit: 0,001° Max. Drehzahl Fräskopf: 6000 U/min Max. Antriebsleistung Frässpindel: 11 kW Djdpfx Aoyqx Rzjn Hsch Max. Drehmoment Frässpindel: 65,7 Nm Fräskopfkühlung: HSK-A63 Werkzeugmagazinkapazität: 40 Max. Werkzeuglänge: 300 mm Max. Werkzeugdurchmesser: 130 mm Max. Werkzeuggewicht: 10 kg Eilgang X-Achse: 4000 mm/min Eilgang Z-Achse: 40.000 mm/min Eilgang Y-Achse: 26.000 mm/min Eilgang W-Achse: 12.000 mm/min Spindelaufnahme: JIS A2-8 Min. Spindeldrehzahl: 38 U/min Max. Spindeldrehzahl: 3.800 U/min C-Achsen-Indexierung: 0,001° Versorgungsspannung: 400 V Maschinengewicht: 14.000 kg ZUBEHÖR: 1 × One-Touch IGF-Softwareoption 1 × ATLING Zweipunkt-Lünette, Typ AX8I-NAOS (Ø85–360 mm) 1 × SMW AUTOBLOK 3-Backenfutter Ø340 mm, Typ KNCS-N-340-117 1 × Spannkraftregler für Futter 1 × Werkstückabnahmer 1 × NC-Reitstock 1 × MARPOSS T18 Werkzeugmesssystem 1 × Elektronisches Handrad 40 × HSK-63 Werkzeugaufnahmen 1 × 2-farbige Status-Signalleuchte 1 × Späneförderer 1 × Kühlmitteltank 1 × Transformator 1 × Komplettes Satz Handbücher + OKUMA CD Die Maschine kann nach Terminvereinbarung unter Strom besichtigt werden. Preis auf Anfrage, Verladung auf LKW im Preis inbegriffen. Weltweiter Versand möglich. Alle Angaben nach bestem Wissen – Genauigkeit ohne Gewähr. Vergleichbar mit Maschinen von Herstellern wie Mazak, DMG Mori, Index Traub, Doosan, Hermle, Chiron und Biglia. Umfasst ebenfalls Drehmaschinen, Dreh-Fräszentren und Fräsmaschinen.

Peržiūrėti detales

Mažas skelbimas

CNC krumplių šlifavimo staklės Reishauer RZ 362A

Düsseldorf

1 218 km

CNC krumplių šlifavimo staklės
ReishauerRZ 362A

Skambinti

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, Šlifavimo sraigtų matmenys: Min./maks. išorinis skersmuo: 280/350 mm Plotis: 84/104 mm Maks. žingsnis su apribojimais: MOD 8.0 (DP 3,2) Sriegių skaičius: su apribojimais iki 3 Dcedpfx Anjyfnlko Heh Maks. naudingoji plotis (poslinkio eiga): 90 mm Išsamią techninę informaciją rasite pridėtame PDF faile. Priedai: Keletas Fässler deimantinių diskų Profilio formavimo įrenginys Šlifavimo akmenys Turbo separatorius

Peržiūrėti detales

Reklamuokite čia