Axa Multifix D1H 63180 pirkti naudotą (5 359)

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1996, SASTA STANKO Engine Lathe, Model: SA562M, Year of manufacture: 1996 Swing diameter over bed: 500 mm Swing diameter over cross slide: 290 mm Centre distance: 1500 mm Spindle speeds: 16–2000 rpm Spindle bore: 55 mm Ijdpfxjvkuaus Abvjat Chuck diameter: 250 mm Forkardt, tool post: Multifix size C. Machine equipped with rapid traverse on X and Z axes. Machine is in good overall condition. For further data, please refer to the data sheets.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, used conventional and screw-cutting lathe with 3-axis digital readout Manufacturer: WEILER Model: Condor 81 B Machine No.: 87596 Ijdpfx Abovadqzeveat Year of manufacture: approx. 1987 Distance between centers: 750 mm Swing over bed: Ø 330 mm Center height over bed: 165 mm Swing over cross slide: Ø 180 mm Center height over cross slide: 90 mm Spindle bore: Ø 40 mm Tailstock quill taper: MT 3 Quill travel: 110 mm Spindle speed: 45 – 2800 rpm (16 steps + 2 motor speed ranges) Feed range: 0.016 – 0.50 mm/rev Drive power: 1.6 + 3.2 kW (main drive motor stages 1+2) Power supply: 400 volts, 50 Hz Connected load: 32 kW Control voltage: 42 volts Equipment & accessories: - 3-axis Heidenhain digital readout, model VRZ 750 - Quick-clamping device and various collets + draw tube - 3-jaw power chuck Ø 160 mm Forkardt F160 - Multifix quick-change toolpost, size B - LED work light - Bed stop - Automatic longitudinal & facing feeds - Electromechanical spindle brake, switchable - 2x emergency stop - Electronic chuck key interlock (via sleeve with button) - Coolant tank with pump in the machine base - Folding chuck guard - Splash guard wall - Wiring diagram - Adjustable machine feet Space required: 1850 x 950 x 1400 mm (L x W x H) Weight: approx. 1,100 kg This newer generation of Weiler lathes is very user-friendly and robust. Machine can be demonstrated under power on site. All information subject to change. Prior sale reserved.

Būklė: naudotas, Swing diameter 710 mm Turning length 2000 mm Control Heidenhain Type Manuel Plus Swing diameter over carriage 410 mm X-axis travel 385 mm Spindle speed 9–1800 rpm Gear stages 2 Drive power – workpiece 22 kW Torque 2500 Nm Spindle diameter 160 mm Spindle bore 92 mm Total power requirement 49 kVA Machine weight approx. 5.6 t Ijdpfx Aboyqtnbjvsat Space requirement approx. 5 × 2 × 2.2 m Spindle nose DIN 55027 / 11 Tool turret: Type MultiFix C Tool holder Capto C4 Tailstock: Tailstock taper MK 6 Quill diameter 110 mm Quill stroke 210 mm Feeds: Rapid traverse (X / Z) 8 / 10 m/min Feed speed max. 5,000 mm/min Feed force max. 2,000 daN The technical data are manufacturer or operator statements and therefore non-binding for us. Interim sale subject to prior notice; our terms and conditions of business and sale apply exclusively. About us More than 400 own machines in stock Over 15,000 m² storage space, crane capacity 70 t More than 10,000 accessory items for your workshop If you would like to sell machines, production lines, or your business, please contact us. Further offers can be found on our website. Inspections are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Būklė: naujas, Condition: new Country of origin: Bulgaria Price: €109,100 Lease rate: €2,061.99 Swing diameter over bed: 890 mm Distance between centers: 3,000 mm Center height: 400 mm Iajdewirxqjpfx Abvjt Spindle bore: 155 mm Swing diameter over cross slide: 490 mm Bed width: 700 mm Spindle mount / DIN 55027: Size 15 Spindle taper: 160 M Number of spindle speeds: 24 Number of feeds: 160 Longitudinal feed: 0.032 – 38.9 mm/rev Cross feed: 0.016 – 19.45 mm/rev Metric thread range: 0.5 – 480 mm Inch thread range: 60 – 1/16 TPI Module thread range: – Cross slide travel: 525 mm Top slide travel: 270 mm Tailstock quill diameter: 125 mm Tailstock taper: MT 6 Tailstock quill travel: 260 mm Motor power: 22 kW Weight: 7,500 kg Drive: geared transmission 3-axis digital readout: Fagor Quick-change tool post: Amestra, Multifix-style system incl. 4 holders (3x rectangular, 1x round) 3-jaw chuck: Bison 3204/DIN6350, Ø 500 mm Fixed center Coolant system Rear chip splash guard full length Leadscrew and feed rod cover Chuck guard Toolholder guard Levelling bolts and plates Reduction sleeve for tailstock quill Tailstock movement via electric motor Low-voltage machine lamp Operating manual Equipment in accordance with CE FURTHER TURNING LENGTHS: Turning length 1,500 mm €94,720.00 Turning length 2,000 mm €98,220.00 Turning length 4,000 mm €117,110.00 Turning length 5,000 mm €128,100.00 Turning length 6,000 mm €144,630.00

Būklė: naujas, Condition: new Country of origin: Bulgaria Price: €53,750 Leasing rate: €1,015.88 Swing diameter over bed: 6 mm Centre distance: 2,000 mm Centre height: 315 mm Spindle bore: 103 mm Swing diameter over cross slide: 4 mm Bed width: 400 mm Spindle mount / DIN 55027: 11 Spindle taper: 120 M Number of spindle speeds: 21 Spindle speed range: 12.5 – 1,250 rpm Number of feeds: 120 Longitudinal feed: 0.04 – 12 mm/rev Cross feed: 0.02 – 6 mm/rev Metric thread range: 0.5 – 120 mm Imperial thread range: 60 – 1/4 TPI Module thread range: -- DP thread range: 240 – 1 Cross slide travel: 315 mm Top slide travel: 90 mm Tailstock quill diameter: 90 mm Tailstock taper: 5 MT Tailstock quill stroke: 2 mm Motor power: 11 kW Weight: 3,310 kg Drive via gear transmission 3-axis digital readout Fagor Quick-change tool post Amestra, system similar to Multifix incl. 4 holders (3x rectangular, 1 circular) Iaodpfx Aewirv Ajbvet 3-jaw chuck Bison 3204/DIN6350, Ø 315 mm Fixed centre Longitudinal stop for single position Coolant system Rear full-length chip guard Leadscrew and feedshaft cover Chuck guard Toolholder safety cover Levelling bolts and plates Tailstock with quick clamping Low-voltage machine lamp Operating manual Equipment compliant with "CE" OTHER AVAILABLE TURNING LENGTHS: Turning length 1,000 mm – €50,880.00 Turning length 1,500 mm – €51,960.00 Turning length 3,000 mm – €58,400.00 Turning length 4,000 mm – €63,790.00 Turning length 5,000 mm – €78,860.00

Būklė: naujas, Condition: New Delivery time: approx. 4 months from order placement Country of origin: Bulgaria Price: €44,400 Leasing rate: €848.04 Swing diameter over bed: 500 mm Distance between centers: 1500 mm Center height: 250 mm Spindle bore: 80 mm Swing diameter over cross slide: 0 mm Bed width: 400 mm Spindle mount / DIN 55027: size 8 Spindle taper: 80 M Number of spindle speeds: 21 Spindle speed range: 20–2000 rpm Number of feeds: 120 Longitudinal feed: 0.04 – 12 mm/rev Cross feed: 0.02 – 6 mm/rev Number of threads: 64 Metric thread pitch range: 0.5 – 120 mm Inch thread pitch range: 60 – 1/4" TPI Module thread range: DP thread range: 240 – 1 Cross slide travel: 315 mm Top slide travel: 1 mm Tailstock quill diameter: 90 mm Tailstock taper: MT 5 Tailstock quill stroke: 2 mm Motor power: 7.5 kW Length: 3,100 mm Width: 1,250 mm Height: 1,400 mm Weight: 2,820 kg Drive: via gear transmission 3-axis digital readout Fagor Quick-change tool post Amestra (Multifix system), incl. 4 holders (3x rectangular, 1x round) 3-jaw chuck Bison 3204/DIN6350, Ø 250 mm Fixed centre Longitudinal stop for single position Coolant system Rear full-length chip guard Leadscrew and feed shaft cover Chuck guard Tool holder guard Levelling bolts and plates Tailstock with quick lock Iasdpfx Abswiq Rfjvjt Low-voltage machine lamp Operating manual Equipment according to “CE” OTHER TURNING LENGTHS: Turning length 1,000 mm €43,420.00 Turning length 2,000 mm €46,190.00 Turning length 3,000 mm €50,840.00 Turning length 4,000 mm €56,200.00 Turning length 5,000 mm €71,400.00

Būklė: naujas, Condition: New Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €107,870 Leasing rate: €2,038.74 Swing over bed: 800 mm Centre distance: 2,000 mm Centre height: 400 mm Spindle bore: 260 mm Swing over cross slide: 560 mm Bed width: 560 mm Spindle taper: 318 M Number of spindle speeds: 12 Spindle speed range: 8 - 400 rpm Number of feeds: 2 Longitudinal feed: 0.039 - mm/rev Cross feed: 0.02 - 7.5 mm/rev Number of threads: 76 Metric thread range: 0.5 - 0 mm Inch thread range: 60 - 1/5 TPI Module thread range: 0.125 - 37.5 DP thread range: 240 - 4/5 Cross slide travel: 410 mm Top slide travel: 0 mm Tailstock quill diameter: 105 mm Tailstock taper: 6 MT Tailstock quill travel: 225 mm Motor power: 11 kW Weight: 6,000 kg The primary application of this type of lathe is pipe machining. Accordingly, this machine model is widely used in the petroleum industry. Pipe thread lathes are highly capable of machining threaded connections on cylindrical and conical internal and external surfaces of pipes with large diameters. Clamping pipes with two chucks and the supplied steady rests enables machining of pipes with significant lengths. Suitable for both production of components and equipment for the oil and transmission industries as well as for the maintenance of such systems. Drive via gear transmission Electrodynamic brake 3-axis digital readout Fagor Quick-change tool post Amestra type C, similar to Multifix system incl. 4 holders (3x rectangle, 1 round) 2 pcs. 3-jaw chuck Bison 3295, dia. 500 mm, on both spindle sides, clamping range 120 - 350 mm (option: special hard outside jaws, clamping range 120 - 500 mm) 2 pcs. steady rests on stands, dia. 60 - 260 mm with rollers Rapid traverse (4) Longitudinal stop for one position Taper turning attachment Iedpfx Abewirghoveat Coolant system Rear chip splash guard over full length Lead screw and feed shaft cover Chuck guard Tool holder guard Levelling bolts and plates Tailstock Reducing sleeve for tailstock quill Mechanical movement of tailstock via handwheel Low-voltage machine lamp Operating manual Equipment in accordance with "CE" Further models available on request with spindle bore from 5 to 358 mm, centre distances from 1,000 to 6,000 mm, and swing over bed from 730 to 1,020 mm.

Būklė: naujas, Condition: New Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €107,970 Leasing rate: €2,040.63 Swing diameter over bed: 800 mm Distance between centers: 2000 mm Center height: 400 mm Spindle bore: 3 mm Swing diameter over cross slide: 560 mm Bed width: 560 mm Spindle taper: 318 M Number of spindle speeds: 12 Spindle speed range: 8 - 400 rpm Number of feeds: 2 Longitudinal feed: 0.039 - mm/rev Cross feed: 0.02 - 7.5 mm/rev Number of threads: 76 Metric thread range: 0.5 - 0 mm Inch thread range: 60 - 1/5 TPI Module thread range: 0.125 - 37.5 DP thread range: 240 - 4/5 Cross slide travel: 410 mm Top slide travel: 0 mm Tailstock quill diameter: 105 mm Tailstock taper: 6 MT Tailstock quill travel: 225 mm Motor power: 11 kW Iaedewiq E Aopfx Abvot Weight: 6100 kg The primary application of this type of lathe is pipe machining. Accordingly, this type of machine is widely used in the oil industry. Pipe-threading lathes possess significant capabilities for machining threaded joints on cylindrical and conical internal and external surfaces of large-diameter pipes. Clamping of pipes with two chucks and the provided pipe rests enable machining of pipes with considerable length. Suitable both for the manufacture of components and equipment for the oil and transmission industry as well as for the maintenance of such installations. - Drive via gear transmission - Electrodynamic brake - 3-axis digital display Fagor - Quick-change tool post Amestra type C, Multifix-compatible system including 4 holders (3 rectangular, 1 round) - 2 pcs. 3-jaw chucks Bison 3295, Ø 500 mm, mounted on both sides of the spindle - 2 pcs. steady rests on stands for Ø 120 - 320 mm with rollers - Rapid traverse (4) - Longitudinal stop for single position - Taper turning attachment - Coolant system - Rear chip protection wall across the full length - Lead screw and feed shaft cover - Chuck guard - Tool holder guard - Levelling bolts and plates - Tailstock - Reducing sleeve for tailstock quill - Mechanical tailstock movement with handwheel - Low-voltage machine light - Operator’s manual - Equipment according to "CE" standards Other models with spindle bores from 5 to 358 mm, center distances from 1000 to 6000 mm, and swing diameters from 730 to 1020 mm available on request.

Būklė: naujas, Condition: new Delivery time: approx. 4 months from order placement Country of origin: Bulgaria Price: €131,720 Leasing rate: €2,489.51 Swing diameter over bed: 1,020 mm Iodpfxowiq Dre Abvsat Distance between centers: 2,000 mm Center height: 510 mm Spindle bore: 358 mm Swing diameter over cross slide: 770 mm Bed width: 560 mm Spindle taper: 361 M Number of spindle speeds: 12 Spindle speed range: 6.3 – 3,100 rpm Number of feeds: 2 Longitudinal feed: 0.039 – mm/rev Cross feed: 0.02 – 7.5 mm/rev Number of threads: 76 Metric thread pitch range: 0.5 – 0 mm Inch thread pitch range: 60 – 1/5 TPI Module thread range: 0.125 – 37.5 DP thread range: 240 – 4/5 Cross slide travel: 505 mm Top slide travel: 270 mm Tailstock quill diameter: 105 mm Tailstock taper: MT 6 Tailstock quill stroke: 225 mm Motor power: 18.5 kW Weight: 6,400 kg The primary purpose of this type of lathe is the machining of pipes. Accordingly, this machine type is widely used in the oil industry. Pipe-threading lathes have great capability for machining threaded connections on cylindrical and conical internal and external surfaces of pipes with large diameters. Clamping of pipes with two chucks and the supplied steady rests enable machining of pipes of great length. Suitable both for manufacturing parts and assemblies for the oil and transmission industries as well as maintenance work on such equipment. Features: - Drive via gear transmission - Electrodynamic brake - 3-axis Fagor digital readout - Amestra Type D1 quick-change tool post, system compatible with Multifix incl. 4 holders (3x rectangular, 1 round) - 2 pcs. 3-jaw chucks Bison 3295, 660 mm diameter on both ends of the spindle (max. 250 rpm), clamping range 5 – 400 mm (option: special hard external jaws, clamping range 80 – 400 mm) - 2 pcs. steady rests on stands, diameter 160 – 360 mm with rollers - Rapid traverse (4) - Longitudinal stop for one position - Taper turning attachment - Coolant system - Rear full-length chip splash guard - Leadscrew and feed shaft cover - Chuck guard - Toolholder guard - Leveling bolts and plates - Tailstock - Reducing sleeve for tailstock quill - Mechanical tailstock movement with handwheel - Low-voltage machine lamp - Operating manual - Equipment according to "CE" standards Further models with spindle bores from 5 to 358 mm, distances between centers from 1,000 to 6,000 mm, as well as swing diameters from 730 to 1,020 mm available on request.

Būklė: naujas, Condition: New Delivery time: approx. 4 months from order Country of origin: Bulgaria Price: €82,740 Leasing rate: €1,563.79 Swing over bed: 860 mm Distance between centers: 3000 mm Center height: 430 mm Spindle bore: 132 mm Swing over cross slide: 620 mm Bed width: 560 mm Spindle mount / DIN55027: 11 Spindle taper: 140 M Number of spindle speeds: 17 Spindle speed range: 7.5 - 1015 rpm Number of feeds: 150 Longitudinal feed: 0.039 - mm/rev Cross feed: 0.02 - 9 mm/rev Metric thread range: 0.5 - 0 mm Inch thread range: 60 - 1/6 TPI Module thread range: DP thread range: 240 - 2/3 Cross slide travel: 435 mm Top slide travel: 150 mm Tailstock quill diameter: 105 mm Tailstock taper: 6 MT Tailstock quill stroke: 225 mm Motor power: 15 kW Length: 3470 mm Width: 1700 mm Height: 1730 mm Weight: 4650 kg Drive type: Geared headstock 3-axis digital readout Fagor Quick-change toolpost Amestra, system similar to Multifix incl. 4 holders (3x rectangular, 1 round) Three-jaw chuck Bison 3295/DIN6350 400 mm Fixed center Rapid traverse (4) Foot brake Longitudinal stop for one position Coolant system Rear chip guard over the full length Lead screw and feed shaft guard Chuck guard Toolholder guard Leveling bolts and plates Tailstock with quick-clamping Reducing sleeve for tailstock quill Mechanical movement of tailstock Low-voltage machine lamp Operating manual Equipment according to "CE" OTHER TURNING LENGTHS: Iedjwiq Rxopfx Abvjat Turning length 1,500 mm €68,870.00 Turning length 2,000 mm €71,780.00 Turning length 4,000 mm €88,640.00 Turning length 5,000 mm €101,200.00 Turning length 6,000 mm €114,800.00

Būklė: naujas, Condition: New Country of origin: Bulgaria Price: €115,600 Leasing rate: €2,184.84 Swing diameter over bed: 1,090 mm Between centers: 3,000 mm Center height: 500 mm Spindle bore: 155 mm Swing diameter over cross slide: 690 mm Bed width: 700 mm Spindle mount / DIN 55027: Size 15 Spindle taper: 160 M Number of spindle speeds: 24 Number of feeds: 160 Longitudinal feed: 0.032 - 38.9 mm/rev Cross feed: 0.016 - 19.45 mm/rev Metric thread range: 0.5 - 480 mm Inch thread range: 60 - 1/16 TPI Module thread range: Cross slide travel: 525 mm Top slide travel: 270 mm Tailstock quill diameter: 125 mm Tailstock taper: MT 6 Tailstock quill travel: 260 mm Motor power: 22 kW Weight: 7,500 kg Drive via gearbox 3-axis digital readout (Fagor) Quick-change tool post Amestra, Multifix-type system incl. 4 holders (3x rectangular, 1x round) 3-jaw chuck Bison 3204/DIN 6350, Ø 500 mm Fixed center Coolant system Full-length rear chip splash guard Iajdowiqv Uspfx Abvjt Leadscrew and feed shaft cover Chuck guard Tool holder guard Leveling bolts and plates Reducing sleeve for tailstock quill Tailstock movement by electric motor Low-voltage machine lamp Operating manual Equipment according to CE standard OTHER TURNING LENGTHS: Turning length 1,500 mm: €101,220.00 Turning length 2,000 mm: €104,720.00 Turning length 4,000 mm: €123,610.00 Turning length 5,000 mm: €134,700.00 Turning length 6,000 mm: €151,230.00

Būklė: naujas, Condition: New Country of Origin: Bulgaria Price: €122,250 Leasing rate: €2,310.53 Swing diameter over bed: 1,320 mm Center distance: 3,000 mm Center height: 625 mm Spindle bore: 155 mm Swing diameter over cross slide: 940 mm Bed width: 700 mm Spindle mount / DIN55027: No. 15 Spindle taper: 160 M Speed range: 5 - 1,000 rpm Number of feeds: 160 Longitudinal feed: 0.032 - 38.9 mm/rev Cross feed: 0.016 - 19.45 mm/rev Metric thread pitch range: 0.5 - 480 mm Imperial thread pitch range: 60 - 1/16 TPI Module thread range: Cross slide travel: 685 mm Top slide travel: 270 mm Tailstock quill diameter: 125 mm Tailstock taper: 6 MT Tailstock quill travel: 260 mm Weight: 8,550 kg Drive via gear transmission 3-axis digital readout, Fagor Quick-change tool post Amestra, system similar to Multifix incl. 4 holders (3 rectangular, 1 round) 3-jaw chuck Bison 3204/DIN6350, Ø 500 mm Fixed center Coolant system Rear chip guard along the entire length Leadscrew and feed shaft cover Chuck guard Tool post guard Leveling bolts and plates Reducing sleeve for tailstock quill Tailstock operated by electric motor Low-voltage machine lamp Operating manual Equipment in accordance with “CE” ADDITIONAL TURNING LENGTHS: Turning length 1,500 mm €107,770.00 Turning length 2,000 mm Iajdpowiqwfofx Abvot €112,550.00 Turning length 4,000 mm €130,160.00 Turning length 5,000 mm €141,250.00 Turning length 6,000 mm €157,780.00

Būklė: naudotas, Gamybos metai: 2020, Condition: used Year of manufacture: 2020 Stock number: 1658 Delivery time: prompt, subject to prior sale Country of origin: Bulgaria Price: €26,500 In stock: 1 Special price: €22,600 Swing over bed: 400 mm Distance between centers: 1000 mm Center height: 200 mm Spindle bore: 52 mm Swing over cross slide: 235 mm Bed width: 320 mm Spindle mount / DIN 55027: size 6 Spindle taper: 6 M Number of spindle speed ranges: 12 Spindle speed: 50–2,240 rpm Number of feeds: 80 Longitudinal feed: 0.015–0.6 mm/rev Cross feed: 0.0075–0.3 mm/rev Number of threads: 40 Metric thread range: 0.25–7.5 mm Inch thread range: 120–4 TPI Module thread range: 0.0625–1.875 Cross slide travel: 235 mm Top slide travel: 110 mm Tailstock quill diameter: 50 mm Tailstock taper: MT 4 Tailstock quill travel: 100 mm Motor power: 4 kW Length: 2750 mm Width: 1100 mm Height: 1600 mm Weight: 1540 kg Iajdpfjwirdtex Abvot This machine is currently used in our workshop for repair work, and has therefore seen very little use (original price: €36,070.00). Drive via gearbox 3-axis digital readout Fagor 40i Quick-change tool post Multifix type B incl. 4 holders (3 rectangular, 1 round) Three-jaw chuck Bison 3204/DIN6350, Ø 200 mm Spindle nose No. 6 according to DIN 55027 Rapid traverse (4) Fixed centre Coolant system 1 flanged plate for turning chuck, Ø 200 mm 1 adaptor sleeve Full-length rear chip guard Leadscrew and feed shaft cover Chuck guard Tool post guard Leveling bolts and plates Tailstock with quick-clamping Low-voltage machine lamp Operating manual and machine labels in GERMAN CE-compliant equipment

Būklė: labai geros būklės (naudotas), Gamybos metai: 2004, Turning length / mm Swing diameter over bed / mm Swing diameter over cross slide / mm Control system / Universal Lathe VDF Boehringer DUS 1000 ti OPTIONAL EQUIPMENT EXTRA COST: C-AXIS MILLING TOOL Machine No. 2042.6616-05 Year of manufacture: 2004 Turning length approx. 2200 mm Swing diameter over bed: 1,000 mm Swing diameter over bed: 1,000 mm Centre height over flat guides: 500 mm Bed width: 560 mm Bed carriage guidance length: 800 mm Spindle diameter of front bearing: 170 mm Spindle bore: 128 mm Infinitely variable AC motor Drive power: 37 kW Max. torque: 4,069 Nm Total speed range: 6.4 - 1,600 rpm Number of gear stages: 2 Iaedpsud In Hsfx Abvet Heidenhain Manualplus 4110 CNC control, completely overhauled approx. 1-2 years ago 2 steady rests Equipped with Rotokraft power chuck, diameter approx. 500 mm Includes a large amount of accessories, approx. 15 sets of chuck jaws and approx. 15 sets of Multifix quick-change tool posts, size D Machine is fitted with a separate milling device with its own control system, value approx. €20,000.00 OPTIONAL EQUIPMENT EXTRA COST: C-AXIS MILLING TOOL Only operated by the owner, in very good condition!

Būklė: naujas, Condition: new Country of origin: Bulgaria Price: €77,840 Leasing rate: €1,471 Swing diameter over bed: 760 mm Distance between centers: 3,000 mm Center height: 380 mm Spindle bore: 132 mm Swing diameter over cross slide: 520 mm Bed width: 560 mm Spindle mount / DIN55027: 11 Spindle taper: 140 M Number of spindle speed steps: 17 Spindle speed range: 7.5 – 1,015 rpm Number of feeds: 150 Longitudinal feed: 0.039 – mm/rev Cross feed: 0.02 – 9 mm/rev Metric thread range: 0.5 – 0 mm Imperial thread range: 60 – 1/6 TPI Module thread range: Cross slide travel: 410 mm Top slide travel: 150 mm Tailstock quill diameter: 105 mm Tailstock taper: MT 6 Tailstock quill stroke: 225 mm Motor power: 15 kW Weight: 4,470 kg Drive via geared transmission 3-axis digital readout by Fagor Quick-change tool post Amestra, system like Multifix incl. 4 holders (3x rectangular, 1 round) 3-jaw chuck Bison 3295/DIN6350 400 mm Fixed center Rapid traverse (4) Foot brake Longitudinal stop for one position Coolant system Rear chip splash guard over full length Iajdpowiq Rrofx Abvet Leadscrew and feed shaft cover Chuck guard Tool post guard Leveling bolts and plates Tailstock with quick clamping Reducing sleeve for tailstock quill Mechanical tailstock movement Low-voltage machine lamp Operating manual Equipment according to 'CE' OTHER TURNING LENGTHS: Turning length 1,500 mm €63,970.00 Turning length 2,000 mm €66,880.00 Turning length 4,000 mm €83,740.00 Turning length 5,000 mm €96,300.00 Turning length 6,000 mm €109,900.00

Būklė: naujas, Gamybos metai: 2025, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 360 mm, veleno skylė: 105 mm, tekėjimo skersmuo: 500 mm, plotis centre: 1 500 mm, sukimosi greitis (maks.): 1 600 aps./min, New conventional lathe DLZ 560x2000 with extensive accessories. Technical main data: Max. turning diameter over bed mm Ø500 Max. turning diameter over cross-slide mm Ø310 Max. turning diameter in gap mm Ø720 Bed width mm 405 Max. workpiece length (between centers) mm 1500 Max. swing length mm 1350 Effective gap length mm 230 Spindle Spindle nose D8 Spindle bore mm Ø80 Spindle taper M.T. No. 7 Metric Ø113 1:20 Spindle speeds (steps) 12 steps Spindle speed range rpm 36–1600 For further data, please refer to the attached documents. Main features - All-inclusive price with 2-axis position readout (SINO – General importer in Germany) installed and powerful 7.5 kW drive - Highly ribbed machine bed absorbs vibrations even during roughing operations - Very wide guideways, induction hardened and ground for long-lasting use with high accuracy. Max. workpiece weight up to 500 kg - Electrically interlocked chuck guard - Equipped with adjustable micrometer stop and overload clutch - Hardened and ground gears in oil-bath lubrication for powerful and quiet spindle drive - Precision spindle bearing for high concentricity and accuracy - Clearly arranged and ergonomically shaped operating controls - Single-lever controls for cross and longitudinal feed and rapid traverse for X/Z-axis on the carriage - Precise gearbox shifting for speed and feed selection - Finely graduated feed and thread pitch selection - Main spindle gearbox with electromagnetic clutch - Key electronics from renowned European manufacturers such as Telemechanique - Comprehensive standard equipment including Multifix toolpost, 3-jaw chuck, faceplate, 3-axis digital readout, steady rests, and much more - All machines are tested by our service technicians prior to delivery Other models (also with cycle control) available on request. Contact us now and discover the world of innovative turning technology! Our services for you: • Consultation and solution finding at your location Iaodeyak Evjpfx Abvet • Organization of machine transport to your facility • Installation, assembly, commissioning, and turnkey handover • Financing and sourcing of subsidies through KFW and BAFA, among others.

Būklė: naujas, Turning diameter: 325 mm Turning length: 1000 mm Swing diameter over cross slide: 250 mm Swing diameter over bed gap: 440 mm Spindle speeds: 12 (85-2000) rpm Tailstock Morse taper: MK 3 Iasdpfotycpaox Abvot Quill travel: 100 mm Quill diameter: 40 mm Spindle mount: DIN 55027 No. 5 Spindle bore: 32 mm Longitudinal feed: 0.006 - 1.77 m/min Cross feed: 0.003 - 0.885 m/min Total power requirement: 2.2 kW Machine weight approx.: 770 kg Space requirement approx.: 2150 x 950 x 1350 mm Equipment: - Coolant system - Machine lamp - Chip guard at rear - Spindle guard - Chuck guard - Tool post guard - Change gears *Special Equipment* - 3-jaw chuck Ø 160 mm, type 3204/DIN6350, BISON - MULTIFIX quick-change tool post type A, incl. 4 tool holders - 2-axis digital readout DRO Newall - Foot pedal with braking function, CE-compliant

Būklė: naudotas, Swing diameter over bed: 540 mm Swing diameter over cross slide: max. 370 mm Distance between centers: 3000 mm Center height: 270 mm Turning diameter in gap: 815 mm Bed width: 344 mm Spindle bore: 88 mm Spindle diameter at front bearing: 133 mm Spindle mount: 11" D1 Camlock Speed range: 18–1400 rpm Number of speeds: 16 3-jaw chuck Röhm Ø 315 mm Longitudinal feeds: 0.06–1.0 mm Cross feeds: 0.03–0.5 mm Metric threads: 0.4–14 mm Iaedpexnqzxjfx Abvot Inch threads: 2–72 TPI Thread module: 0.3–3.5 mm Thread DP: 8–60 pitch Tailstock quill diameter: 75 mm Quill stroke: 230 mm Quill taper: MT 5 Cross slide travel: 280 mm Top slide travel: 150 mm Machine dimensions approx.: 4700 x 1100 x 1400 mm Weight approx.: 3200 kg Drive power: 9.4 kW Accessories: - 2-axis digital readout Fagor - Röhm wedge bar chuck Ø 315 mm incl. hard master jaws and hard top jaws - Multifix toolholder size C incl. 6 quick-change toolholders - Live center - Chuck guard, switchable - 2 steadies - Chip guard - Coolant system - Work light Guideways are in good condition without scoring, not worn Machine is in overall good condition with age-appropriate signs of use. Including operating manual.

Būklė: geras (naudotas), Gamybos metai: 2015, Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 360 mm, tekėjimo skersmuo: 570 mm, sūpynės skersmuo virš skersinio vežimo: 570 mm, quill skersmuo: 95 mm, greitasis eiga Z ašyje: 12 m/min, veleno greitis (maks.): 2 500 aps./min, padavimo ilgis X ašis: 7 mm, X ašies padavimo greitis: 7 m/min, įvesties srovės tipas: trifazis, bendras svoris: 2 970 kg, Technical Data: - Swing diameter above bed: 570 mm - Swing diameter over cross slide: 360 mm - Distance between centers: 2000 mm - Maximum spindle speed: 2500 rpm - Main drive power: 11 kW - Maximum feed rate (longitudinal): 7.5 m/min - Maximum feed rate (cross): 7.5 m/min - Rapid traverse (longitudinal): 12 m/min - Rapid traverse (cross): 15 m/min - Quill diameter: 95 mm - Quill stroke: 220 mm - Quill taper: MT5 - Tool turret: automatic - Number of stations: 8-position (see also options) - CAPTO turret disk Technical Description: - Machine bed made of pearlitic cast iron GG-26 - High rigidity due to strong ribbing - Guideways hardened and ground - Automatic lubrication of bedways - Carriage (bed slide): manual - Tailstock: quick clamping - Two movable handwheels at control panel - One alternative movable handwheel - CNC control: Siemens 828 D Iaodeymtbgepfx Abvot - Siemens "Comfort" (incl. ShopTurn and remnant material detection) - In accordance with DIN 8605 - Electronic handwheels (X- and Z-axes) - Low-voltage lighting - Full enclosure - Paintwork: RAL 7035 (light gray) / RAL 9023 (pearl dark gray) Options / Additional Equipment: - Coolant system - Chip tray - Chip conveyor - Operating manual - 3-jaw wedge bar chuck, Ø 250 mm Condition: All existing base jaws / top jaws from Sommer must be compatible! - Removable tool turret (can be exchanged for Multifix) Dimensions: 3.8 m x 1.3 m x 2 m (LxWxH) Weight: 2.97 t Tools are not included in this offer!

Būklė: naudotas, mašinos/transporto priemonės numeris: 1717, Used WEILER PRAKTIKANT lead and feed screw lathe Centre height: 140 mm Centre distance: 500 mm Spindle bore: 36 mm Spindle speeds: 42–2,000 rpm Equipped with RSF 3-axis digital readout, one 3-jaw chuck Ø160 mm, Chuck guard with electrical interlock, Multifix tool post size A with 3 inserts, Lever-operated collet chucking device with 15 collets. The machine is located at our premises in 71334 Waiblingen-Beinstein and is immediately available. Inspection of the machine is possible by prior arrangement. Isdpfx Abjuqb Emjvjat

Būklė: naujas, Centre height: 315 mm Swing over bed: 630 mm Swing over cross slide: 430 mm Swing in gap: 830 mm Distance between centers: 3000 mm Spindle bore: 103 mm Spindle mount DIN 55027: Size 11 Bed width: 400 mm 21 spindle speed ranges: 12.5 – 1250 rpm Feed range, longitudinal: 0.04 – 12 mm/rev transverse: 0.02 – 6 mm/rev 64 metric threads: 0.5 – 120 mm 64 inch threads: 60 – 1/4" 64 module threads: 0.125 – 30 module 64 diametral pitch threads: 240 – 1 DP Tailstock taper: MT 5 Quill travel: 230 mm Quill diameter: 75 mm Drive power: 11 kW Dimensions (L x W x H): approx. 5100 x 1400 x 1300 mm Weight: approx. 4800 kg Accessories / Special Features: • 3-axis digital readout, manufacturer K+C • 3-jaw chuck, manufacturer BISON, Ø 315 mm • Quick-change tool post, "Multifix" System, Size C • Powerful main drive, 11 kW • Large spindle bore, Ø 103 mm • Travelling steady rest • Fixed steady rest, small • Fixed steady rest, large • Gap in bed • Rapid traverse longitudinal & cross • Electrodynamic brake • Coolant system • Machine lamp • Quick clamping device for tailstock • Bed stop • Full-length rear splash guard • Tool post guard • Chuck guard, with electrical interlock • Leadscrew and feed rod guard • Exchangeable gears • Fixed centre for spindle • Reducing sleeve for spindle • Two-tone paint: upper light grey RAL 7035, base blue RAL 5015 • CE-compliant Delivery time: approx. 2 months after order receipt Delivery: ex works Bulgaria, free loaded truck Warranty period: 12 months for single-shift operation (8 hrs) Iaodpfsk Dpxljx Abvjt Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C, NEWLY Refurbished with Acceptance Protocol for New Machine Tolerances Technical Data: – Machine No. 1824 – Center Height: 180 mm – Center Distance: 1000 mm – Spindle Speeds: 13 to 2000 rpm – Spindle Bore: 56 mm – Short Taper Spindle Nose DIN 55029 Size 5 – Tailstock Morse Taper: MK 4 – Feeds: 0.026 to 0.888 mm/rev – Thread Types: Metric, Inch, Module, and Diametral Pitch – Metric Thread Pitches: 0.35 to 12 mm – Weight: approx. 1500 kg – Spindle Brake, switchable – Drive Power: 2.0/4.0 kW – Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: – 3-Axis Digital Readout by K&C, new, 12 months manufacturer’s warranty with operating manual Features: Switching mm/inch, coordinate selection ABS/INC, halving of display value, reference mark, tool programming for 200 tools, taper calculation, radius/diameter, quick zeroing, count direction switching – 200 mm three-jaw chuck, wedge bar type, like new, 1 set of jaws – Multifix size B with 2 tool holders, NEW – Bed stop – Machine feet – Coolant system – LED machine lamp Isdpfx Abjvrcqdsvoat For added safety, the machine is equipped with: – Electronic spindle guard – Spindle brake – 2 emergency stop switches On request: Covers for the lead and feed screw About the machine: This listing is for a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been reground and hand scraped. Acceptance inspection per test report. Painted in high-gloss 2K white. Accessories such as Multifix and chuck are new. For safety, the machine features a brake motor, electronic spindle guard, and two emergency stop switches—an absolutely as-new condition lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely operator-friendly, allowing surfaces to be produced as finely as ground. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Display, NEWLY Refurbished with Inspection Report for New Machine Tolerances Technical Specifications: Iajdovrckqepfx Abvet >> Machine No. 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread cutting possible: Metric, Inch, Module and Diametral Pitch >> Metric Thread Pitch: from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake switchable >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis K&C Digital Readout, new, 12 months manufacturer's warranty with user manual Functions: mm/inch selection, coordinate choice ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 200 mm wedge-bar 3-jaw chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant device >> LED machine lamp For safety the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been newly ground and scraped. Delivery includes an acceptance report according to inspection protocol. Coated with high-gloss 2K white paint. The Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs extremely smoothly. This latest generation of Weiler lathes is especially user-friendly and allows the production of ground-like finishes. You are welcome to inspect the machine under power on site to convince yourself of its condition.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis Digital Readout K&C NEW. Refurbished with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 87 160 760 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose, DIN 55027 Size 5 with Bayonet Lock Iedpfxsvrdlcs Abveat >> Tailstock Taper: MK 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: Approx. 680 kg >> Spindle Brake, Switchable >> Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories & Equipment: >> 3-axis Digital Readout by K&C, new, 12 months manufacturer warranty, with instruction manual Functions: mm/inch switching, ABS/INC coordinate mode, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switching >> New collet chuck system; NEW collets from 3 to 25 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating instructions, spare parts list (PDF) About the Machine: This listing is for a Weiler Praktikant 160 B engine and feed shaft lathe, refurbished to toolmaker accuracy and fully geometrically overhauled. Supplied with inspection protocol for new machine tolerances. For safety: electronic working spindle guard, lead and feed shaft covers, two emergency stops, and a braked motor. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site to satisfy yourself of its condition.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Centre Lathe Model Condor 81 Lead and Feed Screw Lathe with NEW 3-Axis Digital Readout from K&C Geometrically Overhauled with Inspection Protocol for Tolerances According to New Machine Standards Technical Data: >> Machine No. 84-121 >> Centre Height: 165 mm >> Centre Distance: 750 mm >> Spindle Speeds: 22 to 2800 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose DIN 55027 Size 5 with Bayonet Lock >> Tailstock Morse Taper 3 >> Feeds from 0.015 to 0.46 mm/rev >> Threading Capabilities: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches from 0.18 to 28 mm >> Weight approx. 1,100 kg >> Spindle Brake Switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Accessories and Equipment: >> New 3-axis digital readout from K&C, 12 months manufacturer warranty with operating manual Functions: Switching mm/inch, coordinate selection ABS/INC, display value halving, reference point, tool programming for 200 tools, taper calculation, radius/diameter, quick zero, direction of count switching >> New collet chuck setup, new collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 steel tool holders >> Bed stop >> Electric chuck guard NEW >> Rear splash guard >> Operating manual >> Coolant system >> Machine mounts Isdpfx Aswrm Dtsbvsat About the machine: Offered is a Weiler Condor 81 lead and feed screw lathe in very good geometrically overhauled condition. The guideways have been newly ground and hand-scraped. Inspection carried out according to the test protocol. Accessories such as collets and chucks are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops—an absolutely like-new lathe. The Weiler runs very smoothly even at high spindle speeds. This newer generation of Weiler lathes is extremely user-friendly and allows for ground-like surface finishes. Take the opportunity to inspect this machine under power on-site and see the condition for yourself.