Wolfking Sfg 850/200 pirkti naudotą (19 003)

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, veikimo valandos: 44 590 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 200 t, pildymo angos plotis: 1 020 mm, pildymo angos ilgis: 2 000 mm, ryšulio plotis: 1 100 mm, ryšulio aukštis: 1 100 mm, balo svoris: 1 000 kg, alyvos bako talpa: 3 100 l, tuščias svoris: 50 800 kg, paskutinio kapitalinio remonto metai: 2025, tūrio srautas: 795 m³/val, Technical Data – Baler: Manufacturer: MACPRESSE EUROPA S.R.L. Model: 112 Year of Manufacture: 2002, partially overhauled in December 2025 Operating Hours: 44,590 hours (as of December 2025) Iedpey S Rrujfx Abveib Main Press Force: 200 t Specific Press Force: 16.5 kg/cm² Feed Hopper Dimensions: 2,000 x 1,020 mm Filling Volume: 2.65 m³ Theoretical Throughput Capacity: 795 m³/hour Bale Dimensions: 1,100 x 1,100 mm, length variable Drive Power: 2 x 75 kW Tying: 5-fold horizontal, fully automatic Throughput for MSW: approx. 48 to 54 t/hour, depending on material Hydraulic Oil Tank Capacity: 3,100 L Machine Weight (Press): approx. 50.8 t Scope of Supply: 1 unit baler MACPRESSE, type 111A 1 unit operating manual with CE declaration, electric and hydraulic circuit diagrams Remarks: The machine has been serviced and partially overhauled in our workshop. The following work was carried out, and parts replaced: • Hydraulic oil tank completely emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram disassembled, dismantled into individual parts, mechanics serviced • Replacement of the front two main running rollers • Replacement of knives on the press ram • Main hydraulic cylinder disassembled, dismantled, cylinder tube and piston rod checked, complete seal kit replaced • Replacement of the counter-knife in the frame • Adjustment of knife clearance to approx. 3 mm • Upper steel guide rails in the frame (left and right) replaced • Removal of worn press floor, replacement of floor plate with wear-resistant HARDOX steel • Tying and twisting unit disassembled, dismantled into individual parts, mechanics serviced, all twister shafts and ball bearings replaced • Replacement of all wire rollers in the needle heads • Wire cutters cleaned and readjusted, chains greased and tensioned • All wire guide rollers serviced • All door contact switches replaced • Twister unit disassembled, dismantled, and serviced • General maintenance performed Finally, the baler was tested in both manual and automatic mode. Please refer to the function test video for further details. All documentation (Operating Manual, CE Declaration, Electrical/Hydraulic Schematics) is complete. Inspection by appointment is possible. We accept no liability for technical specifications or possible errors.

Gamybos metai: 2012, būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, Gebrauchte Kerres KBW 200 Fleischwagenwaschanlage aus dem Baujahr 2012 – effizientes Gerät für die Reinigung von Behältern in der Lebensmittelverarbeitung. Die Konstruktion aus Edelstahl, hochwertige Verarbeitung und bewährte deutsche Technik machen das Modell KBW 200 zur idealen Lösung für den täglichen industriellen Einsatz. Das Gerät gewährleistet eine effektive Reinigung durch leistungsstarke Druckdüsen, ein Filtersystem sowie einstellbare Betriebsparameter. Optimale Lösung für Unternehmen, die auf Hygiene, Zuverlässigkeit und Medienersparnis Wert legen. Technische Daten: Hersteller: Kerres Modell: KBW 200 Baujahr: 2012 Leistung: 30 Behälter/h Material: Edelstahl Stromversorgung: 400V, 3Ph Anschlussleistung: 13 kW Kompakte Bauweise – ideal für beengte Platzverhältnisse: L: 3,6 m, B: 1,7 m, H: 2,6 m Gebrauchte Kerres KBW 200 Wellblech-Behälterwaschanlage – effizientes und kompaktes Gerät zur Behälterreinigung in der Lebensmittelindustrie. Bewährte deutsche Qualität. Iiodjwfftgepfx Abvjb

Būklė: geras (naudotas), Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 4608 1999, galia: 5,6 kW (7,61 AG), tūrio srautas: 200 m³/val, Sauso oro džiovintuvas Gamintojas: Motan Tipas: ADC 200/10/20 Prijungimo galia: 5,6 kW Sauso oro kiekis: 200 m3/h Medžiagų silosai, 5 vnt. Gamintojas: Motan Tipas: BC-30 ltr. Papildomas šildymas: 1,55 kW Medžiagų transportavimo įrenginiai, 5 vnt. Gamintojas: Motan Tipas: HLS-06-1-A000-0 Su vakuuminiu siurbliu Iiedoyvfibopfx Abvsb VACOM Tipas: VC 340-720 Galia: 4,6 kW Su centriniu filtru ir Motan valdymu KAINOS SUMAŽINIMAS NUO 6500 IKI 6000 EUR!!!

Būklė: naudotas, Gamybos metai: 2021, veikimo valandos: 266 h, 2021 | Mecalac Ax 850 su šakėmis ir kaušu | Naudotas ratinis krautuvas | 266 darbo val. 📍 Vieta: Vokietija 🚛 Pristatymas galimas į jūsų vietą – naudokitės mūsų pristatymo skaičiuokle, kad įvertintumėte transportavimo kaštus! 💰 Įsigykite dabar už 39 000 EUR, arba pateikite savo pasiūlymą. Apmokėjimas pristatymo metu galimas už nedidelį mokestį (priklauso nuo patvirtinimo)* 👷‍♂️ Patikrinta nepriklausomo eksperto 54 patikros punktai, 53 patvirtinti ✅ 1 trūkumas ℹ️ 0 gedimų ⚠️ 📌 Inspektoriaus komentaras: Krautuvas labai geros būklės Ijdpfx Asy Ruk Ssbveib 📄 Norite peržiūrėti visą patikros ataskaitą, papildomas nuotraukas ar vaizdo įrašą? Patarimas: Nuoroda "40803 Equippo" dažnai naudojama papildomai informacijai internete ieškoti. 💡 Kodėl ši mašina ir mūsų paslauga išsiskiria: ✔ Išsami profesionalų patikra ✔ Galimas pristatymas į darbo vietą ✔ Pinigų grąžinimo garantija ✔ Saugūs ir lankstūs mokėjimo sprendimai 🔄 Svarstote kitas įrangos alternatyvas? Mūsų platformoje rasite naudingų įrankių ir išteklių visiems įrangos savininkams ir operatoriams – lengvai pasiekiama ir paprasta naudotis.

Būklė: naudotas, Gamybos metai: 2008, Cutting height at 90°: 200 mm Cutting length: 410 mm Mitre range horizontal: 45° - 90° - 25° Iiedpfxjy S Rrbo Abvjb Mitre range vertical: 60° - 90° - 30° Roller conveyor / support table: no Saw blade diameter: 520 mm Speed: 2800 rpm Motor power: 5 kW Motor brake: yes Extraction port: 100 mm Machine length: Machine width: Weight: 300 kg

Būklė: naudotas, Gamybos metai: 2000, Pjovimo aukštis ties 90°: 200 mm Pjovimo ilgis: 410 mm Kampinio pjovimo diapazonas horizontaliai: 45° - 90° - 25° Kampinio pjovimo diapazonas vertikaliai: 60° - 90° - 30° Ritininė linija / atraminis stalas: ne Pjūklo disko skersmuo: 520 mm Sūkiai: 2800 aps./min Variklio galia: 5 kW Variklio stabdis: taip Nusiurbimo jungtis: 100 mm Pavaros stabdis: taip Staklių ilgis: Staklių plotis: Ijdpfx Aey S Rq Rjbveib Svoris: 300 kg

Būklė: naudotas, bendrieji matmenys 750x650x770 mm; našumas apie 200 kg/24 val.; su bunkeriu; maitinimo įtampa 230 V, 50 Hz, 8 A; galia 940 W; šaldymo agentas R404a, 0,6 kg; svoris ±95 kg. Bunkeris IšxPlxA 750x860x1100 mm; talpa 200 kg; svoris ±100 kg. Iodpfx Aboyx Szqsvsib

Būklė: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 213294, ruošinio ilgis (maks.): 1 000 mm, CNC tekinimo staklės Mazak INTEGREX 200-IV T – tai pažangus 5 ašių tekinimo–frezavimo centras, vienijantis tekinimo ir frezavimo funkcijas viename įrenginyje. Naudojama aviacijos, automobilių ir įrankių gamybos pramonėje. Staklės labai geros būklės; dirbo 5 dienas per savaitę po 8 valandas. Pastaraisiais metais naudota tik retkarčiais. Paslaugų įmonės likvidavimas. Iijdpfov R Uv Ajx Abvjb

Gamybos metai: 2011, būklė: naudotas, Ypač aukštiems PVC arba aliuminio profiliams Frezos skersmuo: 250 mm Frezavimo plotis: 305 mm Frezavimo gylis: 200 mm Pneumatiniai ruošinio spaustuvai Rankinis padavimas Ijdpfey Sh D Isx Abvjib Svoris: apie 300 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, veikimo valandos: 27 752 h, Funkcionalumas: visiškai funkcionalus, Įranga: dokumentacija / vadovas, Siūlome šį paruoštą darbui GILDEMEISTER CTX 200 serijos 2 CNC tekinimo ir frezavimo centrą, pagamintą 2001 metais. Gamintojas: GILDEMEISTER Tipas/modelis: CTX 200 serija 2 Skirtingai nei nuotraukoje, įrenginys parduodamas su trijų žandikaulių griebtuvu, o ne su spaudžiama kasete; taip pat yra įvairių VDI20 įrankių laikiklių. Trumpųjų strypų padavėjas ilgai nebuvo naudojamas, todėl jo būklė nežinoma. Jei turite klausimų ar reikia daugiau informacijos, parašykite mums žinutę arba paskambinkite. Iiodpfeyu Uytsx Abvjb

Būklė: naudotas, Centrifuginis siurblys, siurblys, KSB Etabloc-GN 50-200/1852, naudota įranga Gamintojas: KSB Tipas: KSB Etabloc-GN 50-200/1852 Iijdpfxoy Nnnbe Abvsb Metai: 2003 Bendri matmenys: Plotis: 810 mm Gylis: 350 mm Aukštis: 400 mm Svoris: 130 kg Elektros duomenys: 400 V; 18,5 kW; 32,5 A Srautas: 72 m³/h Pakėlimo aukštis: 51 metras

Būklė: naujas, Lakštinio metalo plotis: 3100 mm Lakštinio metalo storis: 6 mm Lenkimo geba: 5 mm Viršutinio volo skersmuo: 200 mm Mažiausias lenkimo skersmuo: Ø 300 mm Lenkimo greitis: 5 m/min Bendras galios poreikis: 5,5 kW Staklių svoris: apie 4000 kg Užimamas plotas: apie 4800x1300x1270 mm Įranga: - Kūginio lenkimo įtaisas - Indukciškai grūdinti volai - Varikliu valdoma galinio volo reguliacija Iedpeyv Nf Iefx Abvjib - Staklių rėmas iš plieninės suvirintos konstrukcijos (ST-52) - Volai iš specialaus plieno - Asimetrinis darbo būdas - Šoninis išlenkiamas viršutinis volas - Centriniai volai su elektros varikliu, stabdymo įtaisu, reduktoriumi ir pavaros krumpliaračiais - Mobilus valdymo pultas Papildoma įranga: - Skaitmeninis galinio volo indikatorius - Varikliu varomas apatinis volas

Būklė: labai geros būklės (naudotas), MITSUBISHI MR-S11-200-E31 Iedpfx Abjy S Dvyevoib SER. Nr. 0Y20009

Būklė: naujas, Gamybos metai: 2026, Table length: 1000 mm Table width: 1000 mm Table height: 200 mm Weight: 300 kg Manufacturer: GERD WOLFF Technical Details: • Length: 1000 mm • Width: 1000 mm • Height: 200 mm • Weight: 300 kg • Borehole diameter: 28 mm • Borehole spacing: 100 mm • Plate thickness: 25 mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Anti-adhesion protection against welding spatter • Maximum load capacity • Enhanced fatigue strength • Increased vibration resistance • Fine scale marking • Reinforced with weld seams and ribs on the underside • Optimum working height from 820–865 mm • 4x height-adjustable support legs • Compatible accessory set available (optional) Our welding tables are manufactured using HT 300 cast quality and are nitrided as a single piece after mechanical machining. Additionally, these tables feature precise fine graduations, engraved using laser technology. To ensure proper stability, our welding tables are reinforced on the underside with weld seams and ribs (see images). They also undergo a 3-day gas nitriding process, which increases the table’s corrosion resistance and enhances both fatigue and vibration strength. All our tables come with adjustable legs. The minimum adjustment range is 620 mm, and the maximum is 665 mm, providing a variable working height from 820 to 865 mm. Other available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 • 2400 x 1200 x 200 Please note: Illustrations do not correspond to original size and serve for demonstration purposes only. Our welding tables are manufactured for our distribution brand "GERD WOLLF Maschinenfabrik" by a renowned producer. Iiedpfxoy S D Naj Abvsb 3D Welding Table – 3D Clamping Fixtures – 3D Precision Welding Table

Būklė: naudotas, Gamybos metai: 2019, Overview  This isobaric maturation tank was manufactured by Spadoni in 2019. It is designed for isobaric and isothermal maturation of beverages under pressure, with a working volume of 1,200L (12 hL) and a total volume of 1,300L (13 hL). The tank is certified up to 3 bar (PED) and is equipped with high-quality fittings and insulation. Further information available upon request. Technical Data  Capacity: Working volume: 1,200 L / 12 hL Total volume: 1,300 L / 13 hL Pressure: Operating pressure: 2 bar Casing: 0.49 bar Hydrostatic factory test: 2 bar Certified (PED): 3 bar Material: Stainless steel AISI 304 Insulation: 80 mm polyurethane foam on the cylinder and lower head, stainless steel cladding Finish: Inside: 2B, polished weld seams Outside: 120 grit brushed, polished weld seams Heads: Dished ends (top and bottom) Cooling: Cooling jacket on the cylinder Manway: Isobaric Ø400 mm, pressure-rated up to 4 bar Connections & fittings: 2 lifting lugs Ladder support CIP pipe with top spray ball and 2x shut-off valves NW40 Drain valve NW40 with cap and chain Bottom drain valve NW40 with cap and chain Sight glass level gauge (rigid acrylic, with liter graduation) Probe connection (PT-100 sensor) Sampling valve Safety valve (calibrated to 3 bar) Mounting: Adjustable feet Iodpfjwkfwpox Abvoib

Būklė: naujas, Gamybos metai: 2023, Weight 390 kg Height 1000 mm Capacity 204 l Length 1300 mm Revolutions per minute 1500 rpm Voltage 380/50 V/Hz Motor power 1.6 kW The VKT-200 is a linear vibratory finishing machine used for the surface treatment of parts made from all types of metallic and non-metallic materials. Machines in this series are generally used for long and large-volume parts. With the help of movable partitions inside the machine, sensitive parts can be processed without being damaged by friction with other parts. Optional accessories: - Pneumatic soundproof cover - Speed control - Dosing pump - Magnetic valve - Electric control panel stand - Rinsing water piping system Ijdpfsy S Dn Nox Abvjib Images are for orientation purposes only. Optional accessories are available for an additional charge. Gerd Wolff reserves the right to change the color and technical specifications of the machines. The VKT 200 is manufactured for our sales brand "GERD WOLLF Maschinenfabrik" by a renowned Turkish manufacturer.

Būklė: naudotas, Gamybos metai: 2018, Delivery time approx. 5 months Machine from educational use – excellent condition, low hours (edging unit unused). Supplied without tools. Additional costs for disassembly / shipping / assembly and commissioning / training. Includes Maestro 3D and Pro View. MORBIDELLI P200 Working area X-Y: 3,110 x 1,620 mm, workpiece height Z180 mm Edge banding – Made for You This CNC machining center is equipped with a comprehensive range of edge banding tools to meet every requirement in wood processing. MAIN ADVANTAGES - High performance, featuring the advanced H80C edge banding unit, drilling spindles with 8,000 rpm, and market-leading spindle technology with over 1,000 maintenance-free operating hours. - Better equipped: Suction cups can be configured using the FLEX table system for optimal machine setup according to requirements. - Easier and more intuitive programming thanks to the integrated CAD/CAM module for edge banding technology (MAESTRO EDGE). - User-friendly: The lowered frame allows unrestricted access to the working table at any time; the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration, no safety barriers are required. Base Structure: The fundamental structure is a monolithic, thick-walled steel construction, reinforced across the entire machine bed with welded box sections for exceptional stability. The specially designed, wide-base machine bed ensures lasting precision and rigidity. The supporting structure consists of a robust monolithic steel pedestal with heavy ribbing for maximum stiffness; the especially broad base is designed to provide machine stability, ensuring continuous precision regardless of working conditions, with no need to anchor the machine to the floor. The pedestal offers a large, solid foundation for the movable gantry: the work unit benefits from a balanced, stable, and resilient support able to withstand maximum loads, resulting in higher-quality performance and greater accuracy. The movable gantry is a solid single component fixed to the base, running on high-quality prism guides with recirculating ball carriages. The working unit is mounted on this gantry and travels in Y and Z axes via prism guides with recirculating ball carriages. Movement of the lower movable unit (X-axis) and the working unit along the gantry’s Y-axis is achieved via helical rack-and-pinion drive, delivering greater tooth engagement for higher acceleration and increased speed on X and Y axes. The custom-engineered helical gearing minimizes wear on mechanical components and ensures quieter operation. Vertical Z-axis movement is driven by a recirculating ball screw, providing perfect balance under dynamic loads and supporting rapid acceleration and deceleration. The main milling unit is directly attached to the Z-axis carriage, guaranteeing maximum precision in machining operations. Iisdpfxjyuw Sro Abvob

Būklė: naujas, galia: 17 kW (23,11 AG), X ašies eiga: 850 mm, Y ašies eiga: 500 mm, Z ašies eigos atstumas: 640 mm, įrankių magazino lizdų skaičius: 30, valdiklių gamintojas: HEIDENHAIN, bendras svoris: 6 500 kg, stalo ilgis: 1 000 mm, stalo plotis: 460 mm, valdiklio modelis: TNC 7, aušinimo skysčio tiekimas: 20 juosta, greitasis eiga Z ašyje: 36 000 m/min, greitas poslinkis X ašimi: 36 000 m/min, greitas poslinkis Y ašis: 36 000 m/min, veleno nosis: SK 40 BIG PLUS (BVD 40), veleno greitis (maks.): 12 000 aps./min, įrankio skersmuo: 150 mm, įrankio ilgis: 300 mm, įrankio svoris: 8 g, Įranga: CE žymėjimas, dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, LAGUN L 850 Machining Centre – Available Immediately The LAGUN L 850 machining centre stands for high precision, robust build quality, and cost-effective production. It is ideal for single-part manufacturing as well as series production in mechanical engineering, tool and mould making, and subcontract manufacturing. Your advantages at a glance: Iodpovn Eq Ejfx Abveib ✔ Installation & commissioning in Germany included ✔ Service & spare parts directly from JMT ✔ Financing / hire purchase possible ✔ Compact design with high stability ✔ 24-month warranty Why choose LAGUN: LAGUN is one of Spain’s leading machine tool manufacturers (MAHER HOLDING) and represents robust construction, high dynamics, and long-lasting machine concepts. The machining centres are renowned for reliability, easy maintenance, and low operating costs. Technical Specifications: Control: HEIDENHAIN TNC 7 CNC control HEIDENHAIN 16" TFT screen HEIDENHAIN motors, measuring systems and electronic handwheel HR 510 Chip management: Chip conveyor Preparation: Provision for 4th axis (rotary table) Enclosure: Fully enclosed design with side-opening viewing windows Accuracies: Positioning accuracy: ± 0.005 mm Repeatability: ± 0.003 mm Your benefits as a JMT customer: ✔ Official LAGUN distributor in Germany ✔ On-site technical support and service ✔ Fast spare parts supply ✔ Training and instruction included ✔ Reference machines available in Germany Contact us – we are happy to advise you and provide a customised quotation.

Būklė: geras (naudotas), Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram -Piston diameter: 32 mm -Piston rod: Ø 14 mm -Eye diameter: 12 mm -Stroke: 200 mm -Dimensions: 130/70/H405 mm Isdedv D E Dopfx Abvoib -Weight: 3 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, bendras ilgis: 3 280 mm, bendras aukštis: 2 700 mm, bendras plotis: 2 000 mm, bendras svoris: 11 000 kg, įėjimo įtampa: 400 V, įvesties srovės tipas: trifazis, garantijos trukmė: 12 mėnesiai, PRESS BRAKE 200T × 3200 mm The press brake is used for forming sheet metal. During the ram stroke cycle, the sheet can be bent and adapted to the desired geometric cross-section. The machine is suitable for use in many industries – such as the electromechanical industry, light industry, agricultural machinery manufacturing, shipbuilding, automotive industry, aerospace industry, etc. Machine Features - Back gauge position control - Intelligent position control - Recall functions - Automatic reference point search - Parameter backup and restoration with identification - Fast position indexing - Memory for 40 machining programs, each with 25 steps - Power failure protection Technical Specifications - Pressing force: 200 T - Maximum workpiece length: 3200 mm - Distance between uprights: 2530 mm - Throat depth: 320 mm - Ram stroke: 200 mm - Maximum opening height: 455 mm - Motor power: 11 kW - Weight: 11,000 kg - Machine dimensions (L × W × H): 3280 × 2000 × 2700 mm Equipment - MTP-3212 control unit Iisdpfx Ajyttbmsbvjb - Ball-guided back gauge - Two back gauge fingers - Two front supports - Cylinder covers - Optical safety light curtains (front) - Safety guard (rear) - Foot pedal - AMADA-type punch holder - Four-sided lower tool die - Electrically driven back gauge - Segmented punch with possibility to replace a damaged segment Delivery Terms - The machine is brand new - 12-month warranty - Warranty service - Post-warranty service - CE Declaration of Conformity - Operating manual in English Delivery to the customer is possible. Shipping costs are calculated individually by the transport company. If you are interested in other machines, please visit our website.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, bendras svoris: 1 500 kg, bendras plotis: 1 400 mm, bendras ilgis: 1 175 mm, įėjimo dažnis: 50 Hz, elektrinė saugiklis: 16 A, įvesties srovės tipas: trifazis, Pakeliamas maišytuvas, modelis: D 200 a Išvažiuojantis Diosna maišytuvas Isdpfx Aet Em E Iobvsib Tešlos maišyklė su miltų dulkių dangteliu 2 katilo vežimėliai 2 pavaros, su apsaugos jungikliu 400V jungtis, 16A-CEE kištukas Naudota mašina Turime daug pakeliamų maišytuvų sandėlyje!

Būklė: naudotas, Gamybos metai: 2011, valdiklių gamintojas: Siemens, valdiklio modelis: C200-4D SL, Description: General: Year of manufacture: 2011 Control unit: Siemens 840 Dsl (C200-4D SL) Bar capacity: 65 mm Milling spindles: 18,000 rpm Main spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35.5 kW Max. torque: 170 Nm C-axis: 0.001° Z-axis: 390 mm Bar capacity: 65 mm Clamping cylinder: Hollow clamping cylinder Chuck: 3-jaw chuck Counter spindle: Technology: Motor spindle Speed: 5,000 rpm Max. power: 35.5 kW Max. torque: 170 Nm C-axis: 0.001° X-axis: 600 mm Z-axis: 390 mm Bar capacity: 65 mm Chuck: 3-jaw chuck Tool carrier I: Technology: Milling spindle on cross-slide Speed: 18,000 rpm Ijdpfx Aey Sq T Sjbveib Tool holder: HSK 40 X-axis: 350 mm Y-axis: 160 mm (+/- 80 mm) B-axis: 230° Tool carrier II: Technology: Milling spindle on cross-slide Speed: 18,000 rpm Tool holder: HSK 40 Y-axis: 160 mm (+/- 80 mm) B-axis: 230° Tool magazine: Technology: Chain magazine Number of stations: 80 pcs. Tool changer: Double gripper Max. tool length: 180 mm Equipment / Accessories: Chip disposal: Chip conveyor Coolant supply: High-pressure coolant system with filter Part removal: Gantry loader

Būklė: naujas, Table length: 1000 mm Table width: 1000 mm Table height: 200 mm Weight: 300 kg Our welding tables are manufactured using cast iron of grade HT 300. All welding tables are also available in a nitrided version. To ensure good stability, our welding tables are reinforced with ribs on the underside. • Plate thickness: 25 mm All of our tables are equipped with adjustable legs. The minimum adjustment range is 620 mm, the maximum is 665 mm. This allows for a working height of 820 - 865 mm. Hole diameter: 28 mm For further details on the manufacturing process and the properties of our tables, please refer to our catalogue. The accessories shown are not included in the product scope. 3D welding table - 3D clamping systems - 3D precision welding table Isdpfx Aboymf Tusveib

Būklė: labai geros būklės (naudotas), Felder RL 200 nusiurbimo įrenginys Iodpoy Ia Auofx Abveib Maksimalus našumas: 4000 m³/val. Ištraukimo jungtis: 200 mm Automatinis valymas Variklis: 4 kW Būklė: labai gera

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 5002, X ašies eiga: 850 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 600 mm, valdiklių gamintojas: FANUC, valdiklio modelis: Oi-MC, stalo plotis: 600 mm, stalo ilgis: 1 050 mm, stalo apkrova: 850 kg, veleno greitis (maks.): 15 000 aps./min, ašies variklio galia: 7 500 W, įrankių magazino lizdų skaičius: 24, įrankio skersmuo: 40 mm, Įranga: dokumentacija / vadovas, drožlių transporteris, Įrankio standartas – BT-40. 4-a ašis: komplekte yra rotacinis stalas; Iodpfx Abex Nctfovoib