Baldų priedψ virpesiai

SARG TRT - 200 LT

Būklė: naudotas, LOSER MODEL AA220 DOWEL TRIMMER / TENON CUTTER - USED - Capacity: 7500/1500 dowels per hour - Dowel diameter capacity: 6-18 mm Cgedpjqpdkcjfx Aahsp

Būklė: beveik kaip naujas (naudotas), Inline folielasser en krimptunnel Merk: Kallfass Type: semi/automatische krimptunnel Cjdpfx Aog D Nv Teahogp Model: Mat 1606-KS1600uni Capaciteit: 10-15 verpakkingen/min (afhankelijk van het product) Frame: Staal Bereik: 1600 mm (band) x 600 mm (B x H) Afmetingen: L x B x H = 4000 x 2050 x 1750 mm Gewicht: 900 kg Elektrisch: 380V+N+E, 65 kW Conditie: In huidige staat, werkend

Būklė: naudotas, Gamybos metai: 2013, Overview The Heuft InLine IR – High-Speed Empty Bottle Inspector stands out due to its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It is capable of performing all standard inspections (sidewall inspection, infeed inspection, finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). Additionally, it features a separate module for foreign bottle detection (height, contour, color). In 2016, it was overhauled and modified, including installation of a conveyor control system. Technical Data: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions Completely overhauled and modified in 2016 Features: Performs all standard inspections: sidewall, infeed, finish, base, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color) Codpfoukafrsx Aahsgp

Būklė: labai geros būklės (naudotas), Panel loading at 15 cycles per minute, complete with motorized roller conveyors Loader Cgedpfohv Sttjx Aahep

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2018, STORK VS 24/8 Monoblock Bottling Machine after a general overhaul performed by the professional company Z.M. ROBAK. The machine is practically without signs of use; the protective film is still on the housing. Currently, the machine has been prepared for filling glass packaging – it was used for test filling of alcohol. Number of filling valves: 24 pcs (with light vacuum for still beverages) Number of capping heads: 8 (set up for aluminum screw caps) Output: approx. 7,000 bph (700 ml) Suitable for bottles with the following dimensions (after adaptation to the specific format): – diameter: Ø 45 – Ø 110 mm – height: 105 – 400 mm – standard neck diameter: Ø 28 mm – neck diameter optionally changeable: Ø 18 – Ø 43 mm Machine dimensions: – width: 2,900 mm – height: 2,200 mm – depth: 2,200 mm Weight: 3,200 kg Installed power: 5.5 kW Required air pressure: 0.6 MPa Year of manufacture/modernization: 2018 – not used in production since modernization Cgedou Nhiqepfx Aahep Condition: Machine practically without signs of use. The machine comes with original electrical documentation.

Būklė: naudotas, Gamybos metai: 2016, Panel saw with automatic pre-tensioning and double pusher system for optimized cutting Osi Plus numerical control unit Os Labeling labeling unit with onboard graphic marking, including part drawings Label printing management software Optiplanning cut optimizer Cutting length: 4500 mm Cutting width: 2200 mm Blade projection: 95 mm Motorized rollers for side loading on lift table 4500 x 2200 mm. Translation speed: 10.8 m/min (50 Hz) – 13.1 m/min (60 Hz) Automatic identification of disposable sacrificial panels based on thickness data stored in the machine Low stack stop Automatic side loading. Includes: stop grids, double photocell, control keypad, electrical pre-installation for two motorized infeed roller conveyors, and reinforcement with 4 rollers instead of fork slots in the infeed conveyor Intermediate roller conveyor Side infeed roller conveyor, dimensions 3800 x 2200 mm with motorized rollers (floor height 325 mm) Dead roller conveyor for longitudinal offcuts for corner systems, 4500 mm (total length 7295 mm) 3000 mm extension for dead roller conveyor to also handle cross-cut offcuts Long chute for manual transport of cross-cut pieces to the central dead roller conveyor Air flotation unloading table, 2050 x 850 mm, equipped with wheels on the front Air blower unit for up to 6 air flotation layers MULTIPUSHER 2.4 system with automatic lubrication Additional mobile lateral aligner on the crosswise axis; this device enables reduction of the minimum panel length for cross-cutting from 1830 mm to 1220 mm Automatic device for detecting saw shaft deflection on angled cuts (longitudinal and transverse), consisting of a sensor capturing deflection directly at the saw arbor and a device counting blade revolutions directly at the saw chuck Keypad for remote cycle start Automatic panel loading via rear lift table Automatic double aligner with pneumatic cylinders Cgjdjuc Idxopfx Aahop Additional mobile lateral aligner on the crosswise axis Main saw blade, max. diameter (mm), 15 kW Scoring blade, max. diameter (mm), 2.2 kW Saw carriage speed 1–140 m/min with brushless motors Longitudinal pusher carriage speed 90 m/min Transversal pusher carriage speed 135 m/min Double pusher carriage: 6 clamps on the longitudinal slide + 10 clamps on the cross slide (8 fixed + 2 on the cross slide, Multi-Pusher system) Cutting system for thin panels

Gamybos metai: 2009, būklė: naudotas, Scanvaegt RF5 kontrolinis svarstis, serijos nr.: BMP01014. Cgjdjdqapdepfx Aahop Metai: 2009, nerūdijančio plieno rėmas, svorio diapazonas 600 g – 5000 g, iki 40 pakuočių per minutę, maksimali produkto apimtis 300 x 220 mm, bendras ilgis 800 mm.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, Kaum gebrauchte UV-Linie für Platten oder Fußböden Csdpfov Ux R Sjx Aahjgp

Būklė: naudotas, Gamybos metai: 2019, Highly flexible vertical machining center for milling, drilling, and cutting. The BREMA patent for processing. Due to the vertical alignment, this machine series is by far the most flexible and productive machine on a very high quality level. In addition, the automatic panel return/rotation system ensures fully automatic operation. It is possible to work on all 6 sides of the panel up to a height of 1300 mm. Working dimensions: * Length: 300 - 2500 mm * Height: 60 - 1300 mm * Thickness: 10 - 80 mm * Maximum weight: 50 kg Machine programming and control system via PC with TPA Albatros software. The programming editor with a high-level software interface allows for simple and intuitive machine programming, and additionally enables: * Linear, circular, and helical interpolation * Double zero point * Mirror program management Codel Ikzgjpfx Aahjgp * Turret tool diameter optimizer * Independent spindle diameter optimizer * DXF file conversion (geometric conversion) * Import of job lists in ASCII format * Extra key for office-based programming * Hand-held barcode reader * 17-inch LCD monitor * Professional operating system Windows 7 Panel feeding and handling via motorized vertical transfer with rollers and rubber-coated pressure applicators to secure the panel during processing, with a powered mat length of 2000 mm, equipped with electronically adjustable speed regulation via converter. Photoelectric sensors and NC programming ensure that one or several panels can be loaded sequentially via selector switch. Panel height reading system, consisting of an independent axis capable of reading the panel height before loading into the machine. Reading tolerance of +/- 0.15 mm. If the tolerance is exceeded, a message is displayed to the operator and the machine stops the current operation. Panel thickness reading system via mechanical probe. Horizontal vice – M.O. axis: Allows the thickness of the workpiece to be detected by the program. Vertical vice – M.V. axis: Allows the program to detect the height dimension of the workpiece to be processed. Chain – X-axis – patented double section with laser photoelectric cells that can read the reference zero point before processing starts. The double section enables machining on the underside of the panel, making it possible to machine all six sides of the panel. Brushless motors with programmable speed control via NC. Drilling unit with independent spindles 7 + 17 x 32 mm: 24 independent spindles with 32 mm pitch, arranged as follows: * 7 spindles aligned along the X-axis * 17 spindles aligned along the Y-axis Driven by a high-frequency motor enabling spindle rotation changes up to 7000 rpm. The brushless motor allows for control of drilling depth and feed rate. Top turret milling group with 10 positions and NC-controlled tool change. 11 kW motor with direct power transmission to the tool up to 18,000 rpm. Turret rotation is performed by a controlled axis with a brushless motor.

Būklė: naujas, • Arbeitsbereich 3300 mm X, 200 mm Y, 180 mm Z • 1 x vertikale Elektrospindel 7 kW mit Säge • 1 x vertikale Elektrospindel 7 kW, 12–18.000 U/min • 1 x Elektrospindel 1,7 kW mit Punkt-zu-Punkt-Bohraggregat (vertikal/horizontal) • 1 x horizontale Elektrospindel 5,6 kW, 12–18.000 U/min • 4+4 Werkstückauflagen, verfahrbar auf der X-Achse, jeweils ausgestattet mit verstellbaren pneumatischen Werkstückspannern • Linke und rechte, einziehbare Werkstück-Referenzanschläge • Separater Schaltschrank mit Handbediengerät zur Maschineneinrichtung • Einfache parametrische Programmierung mit 3D-Bearbeitungsmodellen Cedsn Nv S Tepfx Aahogp • Umfassende Sicherheitseinhausung mit Fronttüren, vertikale Öffnung, synchronisiert mit dem Maschinenzyklus