Vaizdo Formuotojo Automatinis Įkroviklis pirkti naudotą (15 502)

Būklė: geras (naudotas), Gamybos metai: 2000, Markė: Cevenini ED400 Pagaminimo metai: 2000 Techniniai duomenys: Maksimali ritinio plotis: 1600 mm Maksimalus ritinio skersmuo: 400 mm Minimali pjovimo plotis: 3 mm Indekso tolerancija: +/- 0,1 mm Priedai: - 1 peilis - 1 purškimo įrenginys - 1 velenas D 76 mm - 1 peilio galąstuvas Ledpfxoy A S Rms Akheac - 1 originalių dokumentų rinkinys Prieš 5 metus mašina buvo pilnai atnaujinta. Nauja Siemens valdymo sistema su vizualizacija.

Būklė: naudotas, Gamybos metai: 2007, Pjovimo skersmuo 330 mm Juostos ilgis 4115 mm Pjūvio plotis 0,9 mm Pagrindinis variklis 3,7 kW Ritininio tako ilgis 5000 mm Ritininio tako plotis 700 mm Ritinių skersmuo – kiaurymė 150 mm Laedpfxszfqh Tj Akhec Bendras energijos poreikis 13 KVA Mašinos svoris apie 1,8 t Automatinė juostinė pjovimo staklė Pjūklas 4 Techniniai duomenys pateikti gamintojo arba naudotojo, todėl mes už juos neatsakome. Pasiliekame teisę parduoti prekę kitam pirkėjui. Galioja tik mūsų bendrosios prekybos ir pardavimo sąlygos. Apie mus Daugiau nei 400 nuosavų mašinų sandėlyje Daugiau nei 15 000 m² sandėlio plotas, krano keliamoji galia 70 t Daugiau nei 10 000 prekių priedų jūsų dirbtuvei Jei norite parduoti mašinas, gamybines linijas ar visą įmonę, susisiekite su mumis. Daugiau pasiūlymų rasite mūsų interneto svetainėje. Apžiūros galimos susitarus iš anksto. Laukiame jūsų apsilankymo. Jūsų Markus Hirsch komanda

Būklė: naudotas, Gamybos metai: 2007, Pjovimo skersmuo 400 mm Juostos ilgis 4715 mm Pjovimo plotis 1,3 mm Pagrindinio pavaros variklio galia 7,5 kW Ritininio konvejerio ilgis 4000 mm Ritininio konvejerio plotis 700 mm Ritininio skersmuo - skylė 150 mm Bendras energijos poreikis 14 KVA Mašinos svoris apie 7,5 t Automatinė juostinė pjovimo staklės Pjūklas 2 Techniniai duomenys pateikti pagal gamintojo arba naudojančio įmonės informaciją, todėl jie mums nėra įpareigojantys. Galimas tarpinis pardavimas; galioja tik mūsų bendrosios verslo ir pardavimo sąlygos. Apie mus - daugiau nei 400 nuosavų staklių sandėlyje - daugiau nei 15 000 m² sandėlio plotas, krano keliamoji galia 70 t - daugiau nei 10 000 priedų jūsų dirbtuvėms Jeigu norite parduoti stakles, gamybos linijas arba verslą – susisiekite su mumis. Daugiau pasiūlymų rasite mūsų internetinėje svetainėje. Laodpfx Ajzfqh Hjkhsc Apžiūrėjimas galimas pagal susitarimą. Laukiame Jūsų apsilankymo. Jūsų Markus Hirsch komanda

Būklė: naudotas, Gamybos metai: 1985, Pjovimo skersmuo 1300 mm Juostos pjūklo juostos ilgis 11880 mm Pjovimo plotis 1,6 mm Pagrindinis variklis 11 kW Stalo plotas 2300x1200 mm Pjovimo zona 1300x1300 mm Bendras energijos poreikis 16 KVA Mašinos svoris apie 17,75 t Pilnai automatinis juostinis pjūklas Pjūklas 52 Techniniai duomenys pateikti pagal gamintojo arba naudotojo informaciją, todėl mes neprisiimame atsakomybės už jų tikslumą. Pasiliekame teisę parduoti įrangą kitam pirkėjui be išankstinio įspėjimo; galioja tik mūsų bendrosios prekybos ir pardavimo sąlygos. Apie mus Daugiau kaip 400 nuosavų mašinų sandėlyje daugiau nei 15.000 m² sandėliavimo plotas, krano keliamoji galia 70 t Lodpozfqhtofx Akhjac daugiau nei 10.000 priedų jūsų dirbtuvėms Jei norite parduoti mašinas, gamybos linijas ar visą įmonę, susisiekite su mumis. Daugiau pasiūlymų rasite mūsų svetainėje. Apsilankymas galimas iš anksto susitarus. Laukiame jūsų apsilankymo. Jūsų Markus Hirsch komanda

Būklė: naudotas, Gamybos metai: 2007, Pjovimo skersmuo 330 mm Juostinio pjūklo ilgis 4115 mm Pjovimo plotis 0,9 mm Pagrindinis variklis 3,7 kW Volelių tako ilgis 5000 mm Volelių tako plotis 700 mm Volelio skersmuo – kiaurymė 150 mm Bendras energijos poreikis 13 KVA Mašinos svoris apie 1,8 t Pilnai automatinis juostinis pjūklas Pjūklas 3 Techniniai duomenys pateikiami pagal gamintojo arba naudotojo informaciją ir todėl yra neįpareigojantys. Tarpinis pardavimas galimas; galioja tik mūsų bendrosios pardavimo ir pirkimo sąlygos. Apie mus Daugiau nei 400 nuosavų mašinų sandėlyje Daugiau nei 15 000 m² sandėliavimo plotas, krano keliamoji galia 70 t Ledpfx Ajzfqhmjkhsac Virš 10 000 priedų jūsų dirbtuvėms Norite parduoti mašinas, gamybines linijas ar visą įmonę? Kreipkitės į mus. Daugiau pasiūlymų rasite mūsų interneto svetainėje. Apžiūros galimos pagal susitarimą. Laukiame Jūsų apsilankymo. Jūsų Markus Hirsch komanda

Būklė: naudotas, Gamybos metai: 2007, Pjovimo skersmuo 400 mm Pjūklo juostos ilgis 4715 mm Pjovimo plotis 1,3 mm Pagrindinio variklio galia 7,5 kW Ritinėlių tako ilgis 4000 mm Ritinėlių tako plotis 700 mm Ritinių skersmuo – kiaurymė 150 mm Bendras energijos poreikis 14 KVA Mašinos svoris apie 7,5 t Pilnai automatinis juostinis pjūklas Pjūklas 2 Techniniai duomenys yra gamintojo arba naudotojo pateikti ir mums nėra privalomi. Pasiliekame teisę į tarpinius pardavimus; galioja tik mūsų bendrosios prekybos ir pardavimo sąlygos. Apie mus Daugiau nei 400 nuosavų mašinų sandėlyje Ledpjzfqhasfx Akheac Daugiau nei 15 000 m² sandėlio ploto, krano keliamoji galia 70 t Daugiau nei 10 000 prekių priedų jūsų dirbtuvėms Jei norite parduoti mašinas, gamybos linijas ar įmonę, kreipkitės į mus. Daugiau pasiūlymų rasite mūsų interneto svetainėje. Apžiūrėjimas galimas pagal susitarimą. Laukiame jūsų apsilankymo. Jūsų Markus Hirsch komanda

Būklė: naudotas, Gamybos metai: 1985, Pjovimo skersmuo 1300 mm Juostos pjūklo juostos ilgis 11880 mm Pjovimo plotis 1,6 mm Pagrindinio variklio galia 11 kW Stalo paviršius 2500x1300 mm Pjovimo sritis 1300x1300 mm Bendras energijos poreikis 16 KVA Mašinos svoris apie 17,75 t Pilnai automatinis juostinis pjūklas Pjūklas 54 Techniniai duomenys pateikiami gamintojo arba savininko ir nėra mums įpareigojantys. Tarpinio pardavimo teisę pasiliekame; galioja tik mūsų verslo ir prekybos sąlygos. Apie mus Daugiau nei 400 nuosavų mašinų sandėlyje Daugiau nei 15 000 m² sandėliavimo plotas, krano talpa 70 t Daugiau nei 10 000 prekių priedų Jūsų dirbtuvėms Lasdpjzfqg Nofx Akhsc Jei norite parduoti mašinas, gamybos linijas ar savo įmonę, prašome susisiekti su mumis. Daugiau pasiūlymų rasite mūsų svetainėje. Apžiūra galima pagal susitarimą. Laukiame Jūsų apsilankymo. Jūsų Markus Hirsch komanda

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Pjovimo greitis bepakopis: 20–70 m/min Juostinis pjūklas: 3660 x 27 x 0,9 mm Padavimo ilgis: 400 mm Lajdpezgdbiofx Akhec Pjovimo sritis – apvali/kvadratinė: 250 / 250 mm Pjovimo sritis – stačiakampė: 300 x 260 mm

Būklė: geras (naudotas), Gamybos metai: 2008, spaudimo jėga: 300 t, valdymo tipas: CNC valdymas, pavaros tipas: hidraulinis, CNC crowning Hydraulic tool clamping EFL Easy Form Laser measuring & correction system Full tool set included Laser safety guard Controlled axes: Y1/Y2/X/R/V-Axis Max. bending length: 4000 mm Distance between uprights: 3150 mm Lodewrza Ajpfx Akhsac Max. pressing force: 320 t Distance table-ram: 570 mm Max. stroke: 300 mm Table width: 200 mm Throat depth: 400 mm Approach speed: 120 mm/min Working speed: 14 mm/min Return speed: 130 mm/min X-axis travel: 1000 mm Control unit: CADMAN Power: 42 kW Length: 5800 mm Width: 2300 mm Height: 3800 mm Weight: 23,000 kg

Būklė: naudotas, Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, For sale is a vertical form fill and seal (VFFS) machine from Rovema. Equipped with two forming shoulders, maximum bag width 35 cm. The machine is operational. Machine dimensions (approx.): Width: 1.30 m Lodpfx Akev Saugohoac Height: 2.15 m Length: 2.70 m Weight: 1,000 kg

Būklė: naudotas, Used automatic shot blasting system by KF Strahltechnik for sale. The system is designed for the automatic blasting of profiles, sheets, and steel structures. With its 4 blast wheels (turbines), the machine is suitable for efficient processing of the top and bottom surfaces of the workpieces. The machine is in good condition and currently still in operation. Viewing and a test run at our facility can be arranged by appointment. Technical Data: Manufacturer: KF Strahltechnik Machine type: Automatic shot blasting system Number of turbines: 4 pcs Maximum workpiece width: 800 mm Maximum workpiece height: 400 mm Suitable for: Profiles, sheet metal parts, steel constructions, and similar workpieces Processing: Blasting of upper and lower surfaces Infeed roller conveyor: approx. 6 m Outfeed roller conveyor: approx. 6 m Condition: Good, currently in operation Inspection: Possible at our facility Test run: Possible by arrangement Terms of Delivery and Sale: The stated price is ex works. Laedpfx Aokw Ukujkhoc Dismantling, loading, transport as well as reassembly/commissioning at the new location are not included in the price and can be offered separately if required. The machine is sold used and in its current condition. Inspection and evaluation prior to purchase is expressly recommended. ✅ Automatic shot blasting system by KF Strahltechnik ✅ 4 turbines / blast wheels ✅ For profiles and sheet metal parts up to 800 x 400 mm ✅ Infeed and outfeed roller conveyors, each approx. 6 m ✅ Currently in operation and in good condition ✅ Inspection and test run possible at our facility ✅ Price ex works, dismantling and installation on request at extra cost

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, 4 ašių įstrižinė šlifavimo staklės su vandens talpa ir siurbliu. Plotis: 8300 mm Aukštis: 3260 mm Gylis: 1000 mm Būklė: labai gera, naudota Lajdpfxezd Sm Uo Akhjc

Būklė: naudotas, Gamybos metai: 2015, Techninės detalės: Velenų skaičius: 6 Veleno perėjimas: 22 mm Strypų padavėjas pilnas – 4,70 metro; skirtas 3 metrų ilgio medžiagai Mašina vis dar prijungta prie elektros Apdirbama medžiaga: plienas Gamyba naudojant alyvą Mašina turi tik Single-NCU be PCU. Lasdpfsxc Idmex Akhec Visų 6 pagrindinių velenų energijos tiekimas buvo visiškai pakeistas 2025 m. balandį. Nėra elektros įrankių lizdo.

Būklė: naudotas, Gamybos metai: 2017, veikimo valandos: 21 752 h, Funkcionalumas: visiškai funkcionalus, tekėjimo ilgis: 100 mm, veleno greitis (maks.): 6 000 aps./min, veleno greitis (min.): 50 aps./min, tekėjimo skersmuo: 42 mm, bendras svoris: 3 000 kg, Didžiausias darbinis ilgis: 100 mm Maks. apdirbamo strypo diametras SP1: 42 mm Maks. apdirbamo strypo diametras SP2: 34 mm Turelio stumoklio eiga X1 ašis: 140 mm Z1 ašis: 235 mm Z2 ašis: 310 mm Ljdpfx Aex Ig Ikjkhjac Ašelių skaičius: 2 Veleno sukimosi dažnių diapazonas SP1: 60–6 000 aps./min Veleno sukimosi dažnių diapazonas SP2: 50–5 000 aps./min Įrankio veleno sukimosi dažnių diapazonas: 50–5 000 aps./min Sukamųjų įrankių kiekis max.: 8 Veleno pavara SP1: 11/7,5 kW Veleno pavara SP2: 5,5/3,7 kW Maitinimo galia: 28 kVA Saugiklis: 81A Strypų padavėjas: SN542–3,2 m Quick tech Gamybos metai: 2017 Serijos Nr.: 1438

Būklė: naujas, Gamybos metai: 2026, The CORMAK H-350SA column band saw is a high-performance machine designed for automatic-cycle cutting of solid materials and profiles. Its robust body and sturdy saw frame, combined with the column-guided design, ensure excellent rigidity and an exceptional level of stability during cutting, even with the toughest-to-machine metals. The saw is equipped with a PLC controller and an easy-to-use touchscreen interface. A notable advantage of this model is its swiveling head, enabling cutting within a 0°–60° range—both in automatic and semi-automatic cycles—with smooth angle adjustment. Manual and Automatic Modes: The saw allows for both manual operations from the control panel and fully automatic cutting cycles, eliminating the need for constant operator supervision. Top Vice Clamp: The saw is adapted for bundle cutting. Automatic Cutting Cycle: In automatic mode, the entire cutting process—including clamping the workpiece, feeding to the specified length, lowering the arm for cutting, and raising it after the cut—is executed without operator involvement. Panel-Controlled Parameters: Cutting parameters such as piece count, workpiece dimensions, band speed, and others are all set and controlled via a user-friendly touchscreen control panel. Lsdpfx Akjwdunwsheac Robust Construction: The machine’s body is made of cast iron mounted on a rigid, space-frame base, providing outstanding rigidity and stability. Band Drive System: A powerful three-speed motor, hydraulic band tensioning, cooling system, and cleaning brush ensure precise and efficient cutting performance. Safety System: In case of blade breakage, the machine stops automatically, enhancing operational safety. Hydraulic Material Feed System: This system allows the machine to operate in a fully automatic cycle with precise feed length adjustment. Innovation and ISO Standards: Cormak ensures innovative solutions and production compliant with ISO 9001 and ISO 14001 standards, confirming high quality, safety, and product reliability. Technical specifications: Cutting capacity: Ø350 or 350 x 350 mm Blade: 4515 x 34 x 1.1 mm Cutting speeds: 27/45/69 m/min Total power: 4.8 kW Hydraulic unit: 0.75 kW Coolant pump: 0.04 kW Blade tensioning: hydraulic Feeder stroke: 500 mm Load capacity: 1500 kg Table height: 700 mm Dimensions: 2800 x 2200 x 1700 mm Weight: 1500 kg

Būklė: naujas, Gamybos metai: 2026, The CORMAK H500SA automatic band saw is a technologically advanced dual-column metal cutting band saw, designed for precise and efficient cutting of large steel components, tubes, and profiles. Thanks to fully automated operation, high power, and robust construction, it is ideal for serial production and heavy-duty industrial applications. Key machine features: - Automatic cutting cycle – complete cutting sequence from loading to return of the saw arm is performed without operator intervention. - Hydraulic vice and material feed – ensure quick, secure, and precise clamping and indexing of the workpiece. - High cutting capacity – allows processing of workpieces up to Ø500 mm or 500 × 500 mm. - Hydraulic blade tensioning – automatically maintains optimal tension, ensuring cutting stability. Laodpoyctwmefx Akhoc - Integrated coolant system and powered blade cleaning brush – extend blade life and improve cut quality. Construction and technology: This machine is built on a heavy-duty cast iron and steel frame, guaranteeing high rigidity and minimizing vibrations during operation. The H500SA dual-column band saw is equipped with a 7.1 kW main motor and an independent hydraulic system. The saw frame is inclined at 3° to the working surface for enhanced effectiveness when cutting profiles and structural shapes. The blade is guided via carbide-insert and ball-bearing supports for precise blade tracking. The movable blade guide adjusts to the width of the material, increasing cutting stability and reducing blade wear. Precision and performance: Hydraulically actuated saw arm downfeed with infinitely variable pressure adjustment enables optimal parameter selection for each material. The control panel with an LCD screen allows programming of cut quantity and lengths, as well as real-time monitoring of operational parameters. The machine automatically signals material end, errors, and cutting progress. Applications: The CORMAK H500SA is an industrial metal band saw recommended for: - Steel fabrication shops - Serial production in metalworking plants - Cutting heavy steel tubes and profiles - Wholesale processing of structural and tool steel Standard equipment: - Fully automatic operation - Arm and vice position memory function - Hydraulic power pack and feed - Hydraulic blade tensioning - Powered blade cleaning brush - Coolant system - Bi-metallic band saw blade - CE declaration of conformity - User manual (DTR) Technical specifications: Cutting capacity: Ø500 mm or 500 × 500 mm Blade dimensions: 5550 × 41 × 1.3 mm Blade speeds: 40 / 60 / 80 m/min Main motor: 7.1 kW Hydraulic power unit: 1.5 kW Coolant pump: 0.09 kW Blade tensioning: Hydraulic Feeder stroke: 500 mm Load capacity: 3 t Table height: 600 mm Overall dimensions (L×W×H): 2900 × 2200 × 1900 mm Weight: 2400 kg

Būklė: naujas, Gamybos metai: 2026, The automatic column-type band saw CORMAK H - 300SA is a high-performance machine designed for automatic cycle cutting of bars, pipes, and profiles made of steel, cast iron, and non-ferrous metals. Its robust saw frame and column construction ensure excellent rigidity and outstanding stability during the cutting process, even with the most challenging materials. The saw is equipped with a PLC controller and an intuitive touchscreen interface. Manual mode allows all operations to be performed from the machine’s control panel. Automatic mode – upon activation, the complete cutting cycle, including clamping the workpiece in the vise, advancing it to the selected length, lowering the saw arm for cutting, and raising the arm to the preset height after the cut, proceeds without operator intervention. Cutting parameters such as number of cut pieces, their dimensions, blade speed, and descent speed are set via the control panel. The machine stops automatically upon completion of the programmed batch, in case of blade breakage, or if another fault is detected by the saw’s control system. The blade drive, based on a frequency-inverter-controlled motor, provides smooth speed adjustment over a wide range. In the event of blade breakage, the machine halts automatically. Accurate blade guidance is ensured by guide bearings and carbide inserts. The movable blade guide head is set according to the size of the material, which enhances blade stability. A coolant system and cleaning brush prolong blade life and maintain optimal cutting conditions. Hydraulically forced descent of the arm is precisely adjustable via a throttle valve. The rapid-feed system shortens cutting times for individual sections. The hydraulic feed system enables a fully automatic operation cycle. The controller, equipped with an LCD display, facilitates programming of the saw, signals material end, displays errors, and provides a cut-piece counter after the programmed cycle. Maximum material feed per stroke is 500 mm, with accuracy of +/- 0.2 mm per stroke. Technical Data: Lajdpfxeiz S Nye Akhsc Cutting capacity: ∅ 300 mm / □ height 300 mm x width 300 mm Bundle cutting: max 260 x 90 mm Blade (length x width x thickness): 3505x27x0.9 mm Cutting speeds: 40/60/80 m/min Feed speed: hydraulic, stepless adjustment Motor: 3.8 kW Hydraulic unit: 0.75 kW Coolant pump: 0.09 kW Feeder stroke: 500 mm Load capacity: 1500 kg Dimensions (L x W x H): 1750 x 1950 x 1550 mm Weight: 1200 kg

Būklė: naujas, Gamybos metai: 2026, The CORMAK H - 260 SA Automatic Column Band Saw is a high-performance machine designed for automatic cutting cycles of bars, pipes, and profiles made from steel, cast iron, and non-ferrous metals. A robust body and heavy-duty saw frame combined with a column design ensure excellent rigidity and an exceptional level of stability during the cutting of even the most challenging materials. The saw is equipped with a PLC controller and a user-friendly touchscreen interface. This saw allows for operation in both manual and automatic modes. Manual Mode enables all operations to be performed manually from the machine’s control panel. Automatic Mode – once the machine is started, the entire cutting cycle, i.e., clamping the workpiece in the vise, feeding it to the set length towards the saw blade, lowering and raising the saw arm to the required height after the cut, takes place automatically, without the need for operator intervention. Cutting parameters such as the number of cut pieces, their dimensions, saw blade speed, and arm descent rate are set on the control panel. The machine will automatically stop at the end of the programmed series, in the event of a blade breakage, or in case of other faults detected by the machine’s control system. The machine body is a cast iron component mounted on a rigid, heavy-duty frame. The enclosure houses the hydraulic unit, coolant tank with pump, and swarf conveyor. The blade drive uses an inverter-controlled motor, allowing for smooth and wide-range speed adjustment. The hydraulic blade tensioner provides optimal working conditions. In the event of blade breakage, the machine stops automatically. Maximum cutting performance and extended blade life are ensured by the cooling system and a cleaning brush. A hydraulic material feeder delivers a fully automatic working cycle. The controller, equipped with an LCD display, enables programming of all saw functions, indicates material end, reports faults, and provides data on the number of cuts after the programmed cycle. Maximum feed length per single stroke is 500 mm with an accuracy of +/- 0.2 mm per stroke. The innovative design and manufacture of CORMAK semi-automatic and automatic band saws according to ISO:90001 and ISO:140001 standards guarantee safety, quality, and reliability. Reliable operation is further assured by the use of motors licensed by ABB, a world-renowned industry leader. Technical Data Cutting range: Ø260 or 260 x 260 mm Blade: 3150 x 27 x 0.9 mm Cutting speeds: 40/60/80 m/min Motor: 2.2 kW Hydraulic power unit: 0.75 kW Coolant pump: 0.09 kW Feeder stroke: 500 mm Load capacity: 1500 kg Dimensions: 1600 x 1800 x 1550 mm Weight: 1000 kg Maximum cutting range Angle 0º ø260 | 260 × 260 mm Standard Equipment - Automatic cycle operation - Arm position memory function - Built-in hydraulic unit Ledpfx Asiz S I Hjkhsac - Vise position memory function - Variable cutting speeds - Driven blade cleaning brush - Cooling system - Bimetal band saw blade - CE Declaration of Conformity - User manual (DTR) in Polish and English For more information, please visit our website.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2005, Funkcionalumas: visiškai funkcionalus, POLY-CLIP FCA 3442 | Automatic Double-Row Clipping Machine Manufacturer: Poly-clip System GmbH & Co. KG Model / Type: FCA 3442 Serial Number: 235/05 Year of Manufacture: 2005 Power Supply: 400 V, 3 Ph, 50/60 Hz, 4 A Power Output: 2.8 kW Operating Pressure: 5 - 7 bar Dimensions: 970 x 870 x 1820 mm Lsdpfx Aoy Um Hmekhoac Conveyor / Discharge Roller Width: 340 mm The Poly-clip System FCA 3442 is a high-performance, automatic double-row clipping machine, recognized as an industry-standard solution in the professional sausage and food processing sector. This machine is designed for medium and large-scale meat processing plants, sausage makers, and companies manufacturing ready-made foods. Its primary function is the precise, rapid, and repeatable sealing of artificial, collagen, and fibrous casings (within the calibre range supported by this model), enabling the continuous and automated formation of sausage sticks, pâtés, and other products. The device works directly with vacuum fillers, receiving portioned stuffing and automatically applying two clips simultaneously (while cutting the casing between them). Its advanced mechanics and reliable clipping system ensure perfect casing tension and leak-proof closure, directly impacting the appearance of the final product and securing the microbiological safety of goods. Once clipped, the product is transferred onto an integrated roller conveyor with a width of 340 mm, from where it can be moved for further thermal processing or packaging.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, POLY-CLIP FCA 3430 | Automatic Clipping Machine Manufacturer: Poly-clip System GmbH & Co. KG Model / Type: FCA 3430 Serial Number: 859 Year of Manufacture: 2011 Power Supply: 400 V / 50/60 Hz / 3-phase Rated Current: 4 A Power: 2.8 kW Dimensions: 1600 x 1250 x 2000 mm Lajdjy Um E Aepfx Akhoc Machine Weight: 595 kg Caliber Range: approx. 24 - 60 mm Maximum Cycle Rate: up to 200 cycles/minute The Poly-clip FCA 3430 automatic clipping machine is a high-performance device that represents the absolute standard in the meat, sausage, and ready meal processing sector. This machine is designed for automatic sealing of casings—both natural and artificial (collagen, protein, cellulose, and plastic)—using aluminum clips. It finds key application in medium and large-scale meat processing plants for serial production of sausages, frankfurters, kabanos, pâtés, salamis, and dense food masses packed in sleeves (e.g. processed cheese, lard, offal). The FCA 3430 model is distinguished by its exceptional operational precision. When synchronized with a vacuum filler (e.g., Handtmann, Vemag), the machine automatically receives the filling, forms a portion of predetermined length or weight, precisely closes two clips simultaneously (sealing the end of one product and the beginning of the next), and—if required by the process—cuts the finished product with an integrated pneumatic knife. The machine operates seamlessly with a loop-string feeding system, allowing for the automatic preparation of sausages ready for hanging on smoking sticks.

Būklė: naujas, Gamybos metai: 2026, The CORMAK H400SA automatic bandsaw is a high-performance machine designed for precise and repeatable cutting of large steel workpieces, pipes, and box sections. Its dual-column construction and automated work cycle make it an ideal solution for manufacturing plants, metalworking shops, and logistics centers processing large volumes of material. Main machine advantages - Automatic operation – a complete cutting cycle without operator intervention: from material clamping, through cutting, to arm return. - Hydraulic feed and vise – ensure fast, safe, and precise cutting. - Memory for arm and vise positions – reduces cycle time and increases efficiency in series production. - Cooling system and driven band cleaning brush – extend the service life of the metal bandsaw blade. - Large cutting capacity – able to cut materials up to Ø400 mm or 400 × 400 mm. Construction and technology The dual-column H400SA bandsaw features a robust steel structure with a cast iron body, guaranteeing maximum rigidity and vibration damping. The frame is set at a 3° angle relative to the feed table, facilitating the cutting of profiles and shaped sections. Precision and work efficiency The hydraulically controlled descent of the arm, with adjustable cutting force and a precise throttle valve, allows pressure to be adapted to the specific material. The hydraulic feeding system with an electronic controller allows programming of cut length and batch quantity. An LCD display provides information on progress, errors, and material end. An automatic stop function reacts to fault detection or completion of the cutting program. Applications The CORMAK H400SA is ideally suited for: - metalworking and steel construction industries, - profile and section processing centers, - series production in metal shops and industrial plants, - logistics companies cutting materials to size. Standard equipment - Automatic work cycle - Memory for arm and vise positions - Hydraulic unit and feeding system - Driven band cleaning brush - Liquid cooling system - Bimetal bandsaw blade - CE declaration of conformity Ljdpfx Aeyctr Rekheac - Operating manual (DTR) Cutting range: Ø400 mm or 400 × 400 mm Blade dimensions: 4900 × 41 × 1.3 mm Blade speeds: 40 / 60 / 80 m/min Main motor: 4.6 kW Hydraulic unit: 1.5 kW Coolant pump: 0.09 kW Feeder stroke: 500 mm Dimensions (L × W × H): 2600 × 2400 × 1700 mm Weight: 1800 kg

Būklė: naudotas, Gamybos metai: 1978, Presskraft 160 t Hubzahl 40–120 Hübe/min Blechbreite mm Gesamtleistungsbedarf 40 kW Druckleistung 160 t (1.600 kN) Tischaufspannfläche 1.100 x 1.280 mm Stößelaufspannfläche 850 x 890 mm Abstand zwischen den Stößelführungen 1.120 mm Abstand zwischen den Ständern (unterhalb der Führungen) 1.350 mm Stufenlose Hubzahlverstellung 40–120 /min Hubverstellung 30/68/114/160 mm Motorische Stößelverstellung 125 mm Einbauhöhe je nach Hub – ohne Aufspannplatte – 460–650 mm – mit Aufspannplatte – 340–530 mm Zulässige Hubzahl in Relation zum Materialvorschub: bei 300 mm = 40–60 Hübe, bei 150 mm = 120 Hübe Gesamtantriebsleistung ca. 40 kW – 500 V – 50 Hz Ljdpfx Aket Hwz Njhoac Gewicht ca. 24.000 kg Zubehör / Sonderausstattung: • FREI / WEINGARTEN Richtapparat Typ AMR 04 So mit Überkopf-Schlaufensteuerung (platzsparend, ohne Grube). Das Blechband wird über die Abrollhaspel zum einseitigen Zangenvorschub und von dort in die Maschine geführt. • HEILBRONN Coilabwickelgerät Typ HAEMH 4000/500 S #204753 mit Coilablageplatz, aus welchem das Coil aufgenommen, gespannt und dann wieder in die Ausgangsposition gefahren wird. Max. Coilgewicht 4.000 kg, Coil-Ø max. 1.500 mm, max. Bandbreite 500 mm. • Angeschraubter Richtapparat für max. Blechbreite 400 mm, Blechführung seitlich verstellbar, Blechdicke einstellbar 1–3 mm. • Automatische Öl-Umlaufschmierung mit Überwachung. • Hydraulische Überlastsicherung, motorische Stößelverstellung 125 mm. • Förderband für fertige Pressteile, separater Schaltschrank – 1990 modernisiert –.

Būklė: naudotas, Gamybos metai: 2005, Cutting diameter: 220 mm Saw blade length: 425 mm Max. cutting length: 2500 mm Total power requirement: 0.95 kW Machine weight: approx. 219 kg Space requirement: approx. ___ m KLAEGER Automatic Hacksaw Type PLUS 220, year 2005 Cutting range: approx. 300 mm Equipped with a high-precision material length stop (2,500 mm) and roller conveyors at the infeed and outfeed Saw blade length: 425 mm Hydraulic feed: 16–32 m/min Lajdpfx Aot Hxayjkhjc Vice adjustable for mitre cuts Coolant device, raised version

Būklė: naudotas, Gamybos metai: 1995, Swing diameter over bed: 50 mm Spindle bore: 26 mm Turning length: 275 mm Total power requirement: 12 kW Machine weight approx.: 4,500 kg T O R N O S CNC-controlled bar automatic lathe with movable spindle (Swiss-type lathe) Model: ENC - 264 Year of manufacture: 1995 No. 160 409 _____ Bar capacity min./max. Ø: 4 - 25.4 mm Turning length or maximum slide travel: 275 mm Infinitely programmable spindle speeds: 10 - 6,000 rpm Feed/rapid traverse max.: 10,000/15,000 mm/min Drilling/thread cutting capacity: 16 mm / M16 Resolution (X and Y axis): 0.0005/0.00025 mm Main spindle drive: max. 5.5 kW Total drive approx.: 12 kW - 400 V - 50 Hz Laedpfx Aot Hwp Tjkhsc Weight: 4,500 kg Accessories / Special Equipment • FANUC 4-axis CNC path control, model Series O-TT with color monitor and all standard features, graphics, cycles, subprograms, handwheel, etc. • Machine configuration: - Movable spindle with max. travel 275 mm (Z axis) - 5 lateral tools actuated by linkage, with a driven drilling and milling unit, X-axis approx. 35 mm - End station with 4 tool positions on one slide: 3 fixed drilling units and one powered counter-spindle. Drive connections for drilling units available; powered drilling units not present. Center distance 90 mm / 125 mm, X2 travel = 355 mm / Z travel = 100 mm (NC axes) - FMB automatic bar feeder for bars up to 3,000 mm with hydraulics - Pneumatic parts catcher with discharge conveyor belt • Various tool holders for 20x20 mm shank, hydraulic cross-slide for side mounting, various long and short collets, and miscellaneous accessories • Complete enclosure, coolant system—no chip conveyor currently fitted, and no rear machining possible at present. The machine is ideal for medium to large production runs and is very easy to program, offering the highest precision. Condition: good to very good – soon available for demonstration Delivery: ex-stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order – please always inquire about your requirements with us.

Būklė: naudotas, Gamybos metai: 1994, Workpiece diameter: 110 mm Grinding length: 410 mm Clamping length: 20 mm Total power requirement: 0.25 kW Machine weight: approx. 500 kg Space requirement: approx. ... m SAAKE Manual form milling cutter – Chamfer grinding machine for grinding form tools made from HSS and carbide profile cutters etc. (see separate PDF) Type: FSM Year of manufacture: 1994 Serial no.: 172/94 _____ Centre height of workpiece holder II: approx. 110 mm Collet holder for shank cutters: Ø 0.5–30 mm Axial adjustment range of workpiece: 14 mm Template infeed range: 20 mm Base table: 700 x 800 mm Height of table top above floor (raised): 900 mm Grinding head: Grinding wheel Ø x bore: 175/125/75 x 51/32 mm Grinding wheel speed via pulley: 3,150–4,500–6,300 rpm Vertical adjustment of grinding head: approx. 65 mm Adjustable clearance angle: approx. 0–45° Spindle drive/total drive: 0.25 kW - 380 V – 50 Hz Weight: approx. 500 kg Accessories / Special equipment: • Units such as grinding head slide, workpiece support holder No. 2, and dressing and adjustment block are easily adjustable on an air cushion. All units can be controlled or fixed individually via pneumatic valves; they are mounted on an "air bearing" and thus can be optimally adjusted for any grinding task. • Workpiece holder A with collet chuck device • Separate workpiece holder B with steep taper 50 holder, each for alternate mounting on the workpiece support holder • Grinding wheel dressing block with diamond and setting gauge. • Assorted collets approx. 50 pieces in all sizes, other accessories. Condition: good – powered up and ready for demonstration with air Delivery: ex-stock – as inspected Lsdpjt Hw Nmsfx Akhjac Payment: strictly net – upon receipt of invoice