Kūginės Pavaros Šlifavimo Staklės pirkti naudotą (58 521)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2024, veikimo valandos: 12 675 h, Funkcionalumas: visiškai funkcionalus, Parduodamos keturios vienodos KAPP pavarų šlifavimo staklės. KAPP NILES KX 260 TWIN Staklių tipas: CNC pavarų šlifavimo centras / šlifuojamos ir profiliuojamos staklės Gamintojas: KAPP NILES GmbH & Co. KG Parduodamų staklių skaičius: 4 Adresas pagal gamyklinę lentelę: Callenberger Straße 52, 96450 Coburg, Vokietija Modelis: KX 260 TWIN Gamintojo Nr.: XXX Pagaminimo metai: 2024 Inventoriaus Nr. PPS: XXX Valdymas: Siemens SINUMERIK Staklių koncepcija: TWIN / dvigubos ašies su sukamąja platforma Apdirbimo technologija: nuolatinis pavarų šlifavimas, pasirinktinai profilinis šlifavimas Automatizacijos koncepcija: automatinis užkrovimas, matoma robotinė FANUC ikrovimo stotis Robotas: matomas FANUC Robot M-710iC/45M Būklė: staklės prijungtos prie elektros / ekranas aktyvus / labai moderni, tvarkinga išvaizda KAPP NILES KX 260 TWIN gamybiniai pajėgumai Didžiausias žiedinis galvos skersmuo: 260 mm Didžiausias ruošinio ilgis: 770 mm Modulių intervalas: 0,5 – 6 mm Didžiausias pavaros pločio dydis: 320 mm, su papildoma komplektacija iki 520 mm Didžiausias spiralinio kampo nuokrypis: ±45° Lasdjzdv Shopfx Afnjc Šie duomenys atitinka KAPP NILES KX TWIN seriją; KAPP NILES apibūdina KX 260 TWIN kaip įrenginį nuolatiniam pavarų šlifavimui su galimybe naudoti tiek formuojamus, tiek neformuojamus įrankius, ir šiam modeliui nurodo būtent šias ribas. Techninė staklių koncepcija KAPP NILES teigimu, KX TWIN serija skirta dideliems gamybos apimtims – vidutinei ir didžiajai pavarų bei velenų gamybai. Konstrukcija apima dvi identiškas ruošinio ašis, kurios išdėstytos viena prieš kitą ant sukamųjų stalų. Kol vienas ruošinys apdirbamas, ant antrosios ašies tuo pačiu metu gali būti kraunama, iškraunama arba nustatoma. Komplektacija / matomi bruožai Siemens SINUMERIK CNC valdymas KAPP NILES valdymo sąsaja TWIN ašių koncepcija / dvi ruošinių ašys Sukamas stalas / indeksuojamas stalas Automatinė užkrovimo ląstelė FANUC M-710iC/45M robotas Matomas roboto griebtuvas / valdymo griebtuvas Apsauginė uždanga / saugos ląstelė Šlifavimo disko laikiklis / matoma šlifavimo ašies sritis Profilio/pavaros šlifavimo sritis matoma Aušinimo / šlifavimo alyvos zona Darbinės zonos apšvietimas Pilnai uždara kabina Rankinis valdymo pultas / elektroninis rankinis ratukas prie valdymo sistemos Signalinis žibintas / šviesoforas CE ženklas matomas ant staklių korpuso Dokumentų laikiklis / techniniai dokumentai prie staklių Elektros duomenys pagal gamyklinę lentelę Maitinimas: 400 V AC Dažnis: 50 Hz Nominali įtampa: 400 V AC Valdymo įtampa: 24 V DC Apšvietimas: 22 W / 230 V Sumontuota galia: 110 kVA Nominali srovė: 79 A cos φ: 0,64 Saugiklis: 100 A gL Valdymo spintelės svoris: 1 000 kg Darbo valandos pagal skaitiklį nuotraukoje T1 bendra trukmė: apie 12 675 val. T2 naudingo darbo trukmė: apie 5 538 val. Daugiau nuotraukų ir vaizdo medžiagos – pagal užklausą.

Būklė: geras (naudotas), Grinding range 650x450x325 mm Table size 600x350 mm Magnetic chuck 600x400 mm MARCELS MASCHINEN CH Ljdpfsfbx A Hox Afneac

Būklė: geras (naudotas), Grinding area 1000x500x630mm Table size 1000x400mm Grinding wheel diameter 400mm Magnetic chuck 1000x500mm MARCELS MASCHINEN CH Laedpfx Afjfbx Dmonsc

Būklė: geras (naudotas), Grinding area 400x250x375 mm Grinding wheel diameter 300 mm Laedpfxofbx Dwe Afnec Magnetic chuck 400x250 mm MARCELS MASCHINEN CH

Būklė: geras (naudotas), Grinding range 800x500x480mm Table size 800x400mm Grinding wheel diameter 400mm Lsdpfx Afjd Nmx Njnoac Magnetic chuck 800x400mm MARCELS MASCHINEN CH

Būklė: labai geros būklės (naudotas), šlifavimo plotis: 600 mm, Magnetinė plokštė yra 1300x700 mm dydžio, veikia prijungus prie elektros. Ljdpfx Afst Ay Nhoneac

Būklė: naujas, Gamybos metai: 2025, Nauja mašina Pagaminimo metai: 2025 Ljdpfx Aex Rv Dyjfnsac Vienpusė briaunų šlifavimo staklės Rankinis perjungimas nuo masyvo šlifavimo prie faneruotės šlifavimo Patentuotas atlenkiamų atramų įrenginys Su šlifavimo juostos oscilacija Šlifavimo bloko pasvyrimas 0–45° pagal skalę, rankinis Variklis 2,2 kW Osciliacinis eigos ilgis 5 mm Darbo stalas 400 x 1100 mm Šlifavimo juostos plotis 150 mm Ištraukimo jungtis 100 mm Užimamas plotas 600 x 1080 mm Svoris apie 400 kg Prieinamumas: iš karto Sandėlio vieta: Flörsheim

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, 4 ašių įstrižinė šlifavimo staklės su vandens talpa ir siurbliu. Plotis: 8300 mm Aukštis: 3260 mm Gylis: 1000 mm Būklė: labai gera, naudota Laodpezd Sm Uofx Afnec

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2010, Funkcionalumas: visiškai funkcionalus, Weinig Rondamat 980 Year of manufacture: 2010 Technical data: Maximum tool width: 330 mm With PowerLock: 322 mm Laodpfx Afswvvyljnjc Tool cutting circle: 100 - 300 mm With PowerLock (optional): 100 - 250 mm Grinding wheel diameter: 125 - 200 mm Spindle speed, frequency-controlled: 1500 - 4600 rpm Grinding spindle drive: 1.5 kW

Būklė: geras (naudotas), Gamybos metai: 1998, padavimo ilgis X ašis: 1 180 mm, padavimo eiga Y ašimi: 644 mm, padavimo ilgis Z ašis: 480 mm, stalo ilgis: 1 000 mm, stalo apkrova: 1 000 kg, stalo plotis: 595 mm, galia: 15 kW (20,39 AG), X-axis travel: 1180 mm Y-axis travel: 644 mm Z-axis travel: 480 mm Table length: 1000 mm Table width: 595 mm Lsdpfx Afswrx Scsneac Table load capacity: 1000 kg X-axis feed rate: 30,000 mm/min Z-axis feed rate: 30,000 mm/min Power: 15 kW Length: 4800 mm Width: 2500 mm Height: 2700 mm Weight: 8000 kg

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, šlifavimo ilgis: 800 mm, šlifavimo plotis: 400 mm, bendras aukštis: 1 850 mm, bendras ilgis: 1 960 mm, bendras plotis: 1 480 mm, padavimo ilgis X ašis: 800 mm, padavimo eiga Y ašimi: 415 mm, ruošinio svoris (maks.): 500 kg, padavimo greitis Z ašis: 360 m/min, šlifavimo disko skersmuo: 350 mm, atstumas nuo stalo iki veleno centro: 520 mm, stalo ilgis: 800 mm, stalo apkrova: 500 kg, įvesties srovės tipas: trifazis, stalo plotis: 400 mm, šlifavimo ratuko plotis: 30 mm, veleno greitis (maks.): 2 800 aps./min, bendras svoris: 1 800 kg, šlifavimo veleno variklio galia: 4 W, SURFACE GRINDER SP-4080AHR • Vertical rapid feed to the workpiece • Coolant tank with magnetic filter • Digital readouts in 2 axes • Free-standing hydraulic unit with heat exchanger • Longitudinal and cross slideways hardened and ground • Longitudinal flat table guideway, cross triangular table guideway • Electromagnetic chuck • Balancing arbor • Grinding wheel flange • Suitable for operation by persons with disabilities • Grinding wheel with holder Lsdjy Sgdgjpfx Afnoac • Wheel dresser • Cooling system • Central lubrication system • Work area lighting • Set of basic adjustment tools • Work table guard • Leveling bolts and pads • Operator’s manual in Polish • CE declaration of conformity Worktable size mm 400x800 T-slots (number x width) pcs/mm 1/14 Max. longitudinal travel mm 800 Cross travel mm 415 Max. distance spindle axis to table mm 520 Longitudinal worktable feed mm/min 3-20 Table feed: Automatic mm/min 0-8 Rapid mm/min 600 Manual / per division mm/div 0.01 Manual / per revolution mm/rev 2 Vertical headstock feed: Automatic mm/min none Rapid mm/min 360 Manual / per division mm/div 0.01 Manual / per revolution mm/rev 2 Grinding wheel: Rotational speed rev/min 2800 Size mm 350x30x127 Grinding accuracy mm 300/0.005 Surface roughness Ra 0.32 Spindle motor power kW 4.0 Cross feed motor power kW 0.04 Max. table load kg 500 Overall dimensions (LxWxH) mm 1960x1480x1850 Gross weight kg 1800

Gamybos metai: 2005, būklė: naudotas, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: 46787, 46787 Apdirbimo staklės centriniams tekinimo darbams su alkūniniais velenais arba panašiomis veleno tipo detalėmis, su 2 nepriklausomomis apdirbimo špindeliais Valdymas: Siemens 840D Įrankių tvirtinimas – Heller tekinimo brošavimo diskas 45 įrankių padėtys aplink perimetrą Įrankio skersmuo Ø700 nominaliai – įrankiai nėra komplekte, galimi papildomai įsigyti už atskirą kainą arba užsisakyti naujus NC valdomas lunetos laikiklis – be lunetos Abipus atitraukiami trijų žnyplių tvirtinimo griebtuvai iš Blessing Automatinės viršutinės pakrovimo durys su pakrovimo sąsaja Individualus drožlių transporteris su aukštu išmetimu Staklės gali būti apžiūrimos prijungtos prie elektros Lajdpfjzdpvgex Afnoc Galimas komponentų sumontavimas pagal atskirą susitarimą ir papildomą mokestį, su pakeičiamų dalių ir įrankių dokumentacija Valdymo ir pavaros apsauga įskaičiuota, atiduodama laisva nuo vietos Staklių bazė – DRZ1250, tačiau dėl esamos karaliaus ašies naudojimo ilgis tarp centrų ribojamas iki maždaug 680 mm; su nauja karaliaus ašimi galima iki >1050 mm Pagaminimo metai: 2005

Būklė: naudotas, Apvaliųjų paviršių šlifavimo staklės: Schaudt Modelis: RFH 500 Būklė: naudota Centers aukštis: 100 mm Atstumas tarp centrų: 500 mm Veleno apsukos: 2225 / 2500 / 2825 1/min Šlifavimo disko skersmuo min./maks.: 200 - 300 mm Svoris, apie: 1900 kg Įranga: - Rankinis ir automatinis veikimas - Aušinimo skysčio sistema - Darbo lemputė - Avarinis stop mygtukas Lajdpsy R Dlfefx Afnjc - Staklių atraminės kojelės

Būklė: naudotas, Gamybos metai: 1986, Ruonychio skersmuo 5 - 250 mm Šlifavimo gylis 100 mm Tvirtinimo ilgis 1200 mm Veleno sukimosi greitis: 13600 / 27200 Šlifavimo sritis 10 - 50 mm Staklių svoris apie 1,2 t Reikalinga erdvė apie 1,2 x 1,0 x 2,0 m Laedpfx Ajzd Hgvofnjc

Būklė: labai geros būklės (naudotas), Gamybos metai: 1991, Ratų skersmuo – maks. 10 – 330 mm Ratų plotis 180 mm Lajdozd Hgispfx Afnoc Modulis – maks. 7 Modulis – min. 0,5 Tvirtinimo ilgis 420 mm Dantų skaičius 10 – 600 Nuolydžio kampas – maks. +/- 45° Apsisukimų dažnis 1100 – 1900 aps./min Šlifavimo disko skersmuo 280 – 350 mm Šlifavimo disko plotis 84 – 104 mm Staklių svoris apie 5,1 t Reikalinga erdvė apie 4,5 x 6,0 x 2,3 m

Būklė: naudotas, Gamybos metai: 1999, Maximum wheel diameter: 280 mm Wheel width: 330 mm Module – max.: 5 Module – min.: 1 Control: LIEBHERR CNC Total power requirement: 28 kW Machine weight: approx. 12 t Space requirement: approx. ___ m LIEBHERR CNC-controlled gear generating and profile grinding machine Model: LCS 282 Year of manufacture: 1999 #1099 Max. wheel diameter: 280 mm Module: 1 - 5 Helix angle: +/- 35° Distance table center to tool center: 15 – 285 mm Vertical grinding slide stroke: 330 mm Shift/traverse path for tool: 200 mm Min. number of teeth: 7 Grinding spindle position above table min./max.: 70 - 360 mm Workpiece clamping length: 420 to max. 620 mm Grinding worm/profile grinding wheel diameter: 145 x 210 / 175 mm Grinding worm/profile tool speed: 2,500 – 10,000 rpm Table rotation speed max.: 750 rpm Spindle drive: 28 kW Total drive approx.: 50 kW - 400 V – 50 Hz Total weight approx.: 12,000 kg Accessories / Special equipment: • LIEBHERR CNC control type LH 90 GG: easy-to-program CNC control (B+R/IPC 5000) with gear-specific user interface and diagnostic features for quick troubleshooting. (Remote diagnosis also possible) • Equipped with an automatic device for threading the grinding wheel into the tooth gap. • The machine operates with three grinding processes: a. Generating grinding using CBN grinding worms = fastest processing b. Profile grinding with CBN profile grinding wheels (one or two wheels) = highest accuracy! c. Combination of a and b (most economical solution): pre-grinding with grinding worm / finish grinding with profile grinding wheel in single-part processing • Automatic shifting of the grinding worm or automatic positioning of the profile wheel • Automatic workpiece loading device using a ring loader mounted on the counter column, which automatically moves raw and finished parts in and out. The workpieces are transported to the ring loader via a separately positioned FLEX LINK chain conveyor, picked up and removed. This enables unmanned production. • Hydraulic workpiece clamping in the table, but without clamping devices. Tailstock slide on the counter column present but without tailstock. Slide stroke up to approx. 350 mm. • Complete work area enclosure with sliding door and separate CO2 extinguishing system / IR sensor No original coolant system (as central supply), and no dressing device supplied. Laodpot Hwu Aofx Afnsc Condition: good to very good – powered, ready for demonstration, compact design! Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We appreciate your interest – a further 200 gear machining machines available from stock at all times.

Būklė: naudotas, Gamybos metai: 1975, Workpiece diameter: 8–125 mm Grinding depth: 130 mm Clamping length: 50–1100 mm Max. workpiece diameter: 0 mm Min. workpiece diameter: 0 mm Workpiece length: mm Total power requirement: 1 kW Machine weight: approx. 500 kg Lajdpfet Hwuvex Afnec Required space: approx. m T E C H N I C A (Switzerland) Vertical Centre-Bore Grinding Machine Model: ZSM 1000 Year of manufacture: approx. 1975 Serial no.: J 1400 _____ Centre distance: 50 – 1,100 mm Workpiece diameter: 8 – 125 mm Swing diameter, tailstock centre / guideway: 290 mm Swing diameter, vice / grinding head column: 130 mm Workpiece weight: approx. 120 kg Max. centre bore taper diameter: 2–50 mm Max. centre bore taper angle: 60° Vice clamping range: approx. 4–150 mm Vertical grinding head stroke, coarse adjustment: 130 mm Fine feed of grinding pin via handwheel: 0.01–1 mm Grinding pin diameter: 27–60 mm Grinding spindle speeds (depending on pulley): 13,000–45,000 rpm Workpiece drive: 0 rpm Total drive capacity: approx. 1 kW, 380 V, 50 Hz Weight: approx. 500 kg Accessories / special features: • On this machine, the grinding pin rotates around a parallel, offset axis, creating a planetary motion along the concial surface to be ground at the centre of the workpiece. • Manually height-adjustable workpiece centring stock with carbide inserts and counter-centre, with manual clamping and centring of the workpiece. • Manual dressing attachment mounted laterally to the grinding spindle, stroke approx. 40 mm, with an additional oscillating motion to produce an accurate geometric cone shape. • Fold-down pre-centring device for the workpiece. • Manually height-adjustable tailstock and bore in the machine base for longer workpieces. The machine, however, does not have a workpiece drive in the tailstock. The machine is also without a pre-centring device. Condition: Slightly in need of overhaul – ready for demonstration – Current new price is at least approx. €80,000. Delivery: ex stock – as inspected Payment: strictly net – payable upon receipt of invoice before delivery.

Būklė: naudotas, Gamybos metai: 1983, Workpiece diameter: 250 mm Centre distance: 0 mm Max. honing length: mm Max. module: 5 FÄSSLER (Switzerland) Conventional gear honing machine Model D-250, Year of manufacture: 1983, Serial No. 31 205.049.22 _____ Gear diameter: 10 - 250 mm Module: 1 - 5 Gear length / table stroke max.: 500 mm Centre height of tailstocks: 220 mm Max. workpiece weight: 50/100 kg Swiveling range of the honing head: +/- 35° Lodpfx Aot Hwzpjfnjac Honing tool speeds: 20 - 500 rpm Honing tool size / width: 300 / 40 mm Workpiece speeds: 500 - 3,000 rpm Total cross slide travel: 270 mm Rapid cross slide traverse: 50 mm Mechanical infeed of cross slide: 1 - 8 mm/Ø Roughing / finishing infeed: 1-29 / 0.2-2.8 μm/sec. Hydraulic table speed: 0 - 6 m/min Total drive power: 5.5 kW - 380 V - 50 Hz Weight: 3,200 kg Accessories / special equipment: - Pre-settable machining parameters via counters and control devices for automatic operation, with workpiece counter - All roughing and finishing infeeds are set via decade switches; table reversing times and rapid feed times can be adjusted via potentiometer (1 s = 0.04 mm) - Ampere meter, etc. - Possibility for crowning and taper honing via templates, possible off-centre as well (workpiece must be pre-machined accordingly) - Separate honing oil unit with magnetic separator and fine filter - Mechanical tailstocks for manual loading, oil mist separator - Sliding doors with foot switch, separate hydraulic system

Būklė: naudotas, Gamybos metai: 2011, Workpiece diameter: 320 mm Thread length: 570 mm Thread pitch: 315 mm Total power requirement: 17 kW Machine weight approx.: 12 t Space requirements approx.: O F F E R We can offer you, subject to prior sale and errors excepted, from stock without obligation: M I K R O M A T Universal Thread and Worm Grinding Machine Lasdpfx Afjt Hxbdenoc Type GSU 320/1 PC, Year of manufacture 2011, fully reconditioned #2319.01.27 _____ Max. / Min. Grinding diameter: 3 – 320 mm Max. grinding length (grinding wheel width 50 / 8 mm): 520 / 570 mm Between centers: 1,000 mm Max. workpiece weight: 160 kg Workpiece spindle bore: 40 mm Pitch range min./max.: 0.25 - 315 mm Max. pitch angle: + / - 40° Max. profile size: Module 20 Automatic radial division device: 2/3/4/5/6/8/10/12/15/20/24/30/40/60 Relief grinding stroke: 0 - 6 mm Plunge-cuting depth: 0 - 6 mm Workpiece speed: 0.125 - 100 rpm Rapid return: 2 m/min Grinding wheel Ø x width x bore: 500 x 60 x 203 mm Max. grinding wheel speed: 1,595 rpm For dressing/rolling-in: 12 - 32 rpm Spindle drive approx.: 6.5 kW Total drive: 17 kW - 380 V - 50 Hz Weight: 9,500 / 12,000 kg Accessories / Special equipment • The machine was purchased as a fully overhauled and electronically modernized (new) machine directly from the manufacturer MIKROMAT in 2011! • Universal machine for automatic grinding of single- and multi-start worms and threads with straight and curved flanks using single- or multi-profile grinding wheels. • Longitudinal grinding, relief grinding, plunge-cut grinding, groove grinding, and taper grinding can be executed via simple cycle guidance on the SCHLEICHER PLC control PROMODUL U. Feed and compensation are automatic. Cam templates required for relief and taper grinding; dividing is achieved by change gears! • Manual dressing device for profiling single-profile grinding wheels, left and right flanks • Non-driven steel infeed rolling device for installation above the grinding wheel • Open steady rest for mounting on the grinding table and closed 3-point steady rest • Workpiece driver device in the spindle with various centers and workpiece arbors • Hand division device for circumferential division for mounting on the workpiece spindle • Large assortment of change gears, further accessories and various spare parts, operating manuals • High-end KNOLL coolant band filter system HL650/1500 with HYFRA cooling unit Condition: very good, ready for demonstration – Delivery: immediately from stock, as inspected. Payment: strictly net after receipt of invoice. We look forward to your order. We always have thread grinding machines in stock—please let us know your requirements!

Būklė: naudotas, Gamybos metai: 1973, Maximum wheel diameter: 400 mm Wheel width: 75 mm Total power requirement: 25 kW Machine weight: approx. 7,000 kg LORENZ High-performance gear shaping machine Model: LS 400 Year of manufacture: 1973 S/N: 11 884 _____ Max. external wheel diameter: 400 mm* (potentially larger) Max. internal gearing diameter: approx. 350 mm Max. wheel width: 75 mm Module range: 0.5 – 6 Stroke length: approx. 82 mm Adjustable stroke position: 0 – 80 mm Ram clearance (ram spindle / machine body): 250 mm Spindle taper: approx. MT5 Strokes (roughing/finishing): 118 – 1,000 rpm Laedpfx Afjt Hw Hlsnsc Table size: 400 mm Table bore: 125 mm Installation height between table and shaping head: min./max.: approx. 280/350 mm Fixed ram clearance: 250 mm Axial table travel: approx. 295 mm Approximate number of teeth: 12 – 150/300 Feed range Tooth depth: 0.01 – 0.063 mm/stroke Radial feed (for tool Ø 125): 0.125 – 3.150 mm/stroke Spindle/total drive: approx. 19 kW / 25 kW – 380 V, 50 Hz Weight: 7,000 kg Accessories / Special features: • Built-in intermediate plate 200 mm for shaping head elevation • Hydraulic workpiece clamping (RINGSPANN brand) integrated in table for flat workpieces • Automatic stroke and automatic feed changeover for roughing and finishing in up to 4 cuts • Separate control and electrical cabinet, separate hydraulic unit • Integrated coolant system with magnetic chip conveyor, two-hand operation • Approx. 40 change gears, 4 shaping tool holders, 2 pulleys for stroke drive, etc. Condition: Good, operational and can be demonstrated under power Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1969, Wheel diameter - max. 265 mm Wheel width 45 mm Module - max. 4 Module - min. 0.3 Workpiece diameter - max. 300 mm Stroke length max. 0-50 mm Stroke position adjustment 25 mm Distance between work spindle and clamping surface max. 170/245 mm Internal spindle taper MK 4 Table size 180 mm Table bore 95/75 mm Number of strokes per minute 450 - 840 Total power requirement 10 kW Machine weight approx. 5200 kg Space requirement approx. m max. gear wheel Ø (external) approx. 265 mm * max. workpiece Ø for internal gearing 300 mm max. gear width 45 mm Module range 0.3 - 4 Stroke length 0 - 50 mm Stroke position adjustment 25 mm Distance table to spindle min./max. 170/245 mm Spindle internal taper (external 90/50 internal) MK 4 Table size 180 mm Table bore 95 / 75 mm Table travel, transverse approx. 175 mm Lajdpfx Aot Hwruofnoc Steplessly adjustable strokes per minute 450 - 840 strokes/min Feed range 0.09 - 0.6 mm/stroke Circular feed 2722 - 681 strokes/cutting wheel revolution Total drive 10 kW - 380 V -50 Hz Weight 5,200 kg Accessories / Special Equipment * Rotary switch for various operating programs and manual control * Multiple-cutting device for roughing/finishing/burning out * Hydraulic external workpiece clamping device mounted on the table (internal toothing performed; type of collet) * Separate control cabinet and separate hydraulics * Hydrostatic linear guiding with separate oil cooler * Lateral table offset for optimal ram lift-off * Stepless stroke rate adjustment via GS motor * Built-in coolant system * Pre-settable impulse counter for precise table shut-off after each cut, with digital display * Various change gears

Būklė: naudotas, Gamybos metai: 1974, Wheel diameter - max. 400 mm Wheel width 75 mm Total power requirement 25 kW Machine weight approx. 7 t LORENZ High-Performance Gear Shaping Machine Model LS 400 Year of manufacture 1975 S/N 12592 _____ Max. external gear diameter 400 mm * (possibly larger) Max. internal gear diameter approx. 350 mm Max. gear width 75 mm Module range 0.5 - 6 Stroke length 82 mm Stroke position adjustment 0 - 100 mm Distance from shaping spindle to machine body 205 mm Spindle taper approx. MK 5 Strokes per minute roughing/finishing 118 - 1,000 /min. Table size 400 mm Table bore 125 mm Installation height between table and shaping head min./max. 190/290 mm Fixed distance shaping spindle 250 mm Table axial travel approx. 295 mm Number of teeth approx. 12 - 150 Feed range Tooth depth 0.01 - 0.063 mm /stroke -"- Radial feed at tool-Ø 125 0.125 - 3.150 mm /stroke Spindle / total drive approx. 19 kW / 25 kW - 380 V - 50 Hz Weight 7,000 kg Accessories / Special equipment: • Hydrostatically guided slideway with separate hydraulic unit • Built-in intermediate plate 100 mm to increase shaping head height • Hydraulic workpiece clamping system, brand RINGSPANN, integrated in the table for flat components and internal clamping, various clamping chucks for different workpiece diameters • Infinitely variable stroke speed adjustment for roughing and finishing (SIMOREG DC-Master) • Automatic stroke speed change and automatic feed change for roughing and finishing in up to 3 cuts • Automatic and motor-driven stroke position locking at top dead center after finishing • Separate control cabinet • Integrated coolant system with chip conveyor and magnetic separator • Approx. 20 change gears Condition: Satisfactory to good, shortly demonstration-ready Laedpfot Hww Dox Afnjc Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1987, x-axis travel: 400 mm y-axis travel: 250 mm Workpiece height: 485 mm Control: ELESTA CNC 314 Total power requirement: 10 kW Machine weight approx.: 4,000 kg Space requirement approx.: [please specify dimensions] m H A U S E R (Switzerland) CNC controlled coordinate grinding machine Model: S 3 – CNC 314 Year of manufacture: 1987 / partially overhauled in 1998 # S 3 - 0463 _____ Table size approx.: 600 x 380 mm Table load capacity approx.: 300 kg Maximum longitudinal table travel (X): 400 mm Maximum cross table travel (Y): 250 mm Maximum vertical adjustment of grinding slide (W): 450 mm Maximum grinding spindle stroke (Z): 120 mm Grinding head stroke, hydraulic: 15 - 7,500 mm/min Installation height table/grinding spindle min./max.: -75 / +485 mm Grinding spindle overhang: 350 mm Maximum angular grinding: 16° Maximum bore grinding diameter approx.: 230 mm 18 spindle speeds, depending on spindle motor Lodpst Hw Txjfx Afnoac Continuously variable: 4,500–80,000 rpm Planetary rotation speed (C), continuously variable: 5–250 rpm U-axis, radial feed: 6 mm Total drive approx.: 10 kW - 380 V – 50 Hz Machine weight approx.: 4,000 kg Accessories / Special Features: • CNC path control type CNC 314 (ELESTA – POSELESTA II) with monitor for 4 axes (=XYC+U-axis), interpolation in 2.5 dimensions (XYC). The U-axis is a feed axis and is not interpolatable. Teach-in programming directly on the machine, with various subprograms, as well as manual movement of the axes at the control panel or with electronic hand unit. Separate digital readout for Z-axis • U-axis as manual and controlled radial feed axis at the grinding head, with digital readout of feed size • 2 grinding motors #5674 and 3980 up to a spindle speed of 80,000 rpm • Built-in acoustic grinding contact monitoring device KSV 5 • HI-Cut device (oil cooling) and automatic fire protection system • Free-standing coolant system with belt filter, separate hydraulic unit and control cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories currently available. Condition: good to very good / shortly ready for demonstration under power Delivery: ex stock, as inspected Payment: strictly net - upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1981, x-travel: 650 mm y-travel: 450 mm Workpiece height: 585 mm Control: ADCOS CNC 400 Total power requirement: 15 kW Machine weight approx.: 5000 kg Space requirement approx.: m Lsdjt Hw S Ujpfx Afnoac H A U S E R (Switzerland) CNC-controlled double-column coordinate grinding machine Model: S 40 – CNC 311 / ADCOS 400 CNC Year of manufacture: 1981 / modernised in 2008 #0125 Table size approx.: 630 x 770 mm Table load capacity approx.: 500 kg Table longitudinal travel max. (X): 650 mm Grinding head cross travel max. (Y): 450 mm Vertical adjustment of cross beam max. (W): 500 mm Grinding spindle stroke max. (Z): 140 mm Grinding head stroke rate (4Hz): 0.5–12 m/min Vertical clearance between table/spindle: 0–585 mm Clearance between columns: 750 mm Taper grinding max.: 16° Grinding diameter (bore): approx. 230/360 mm 18 spindle speeds, infinitely variable depending on spindle motor: 4,500–80,000 rpm Fine feed rates in X and Y axes and W axis: 0.5–1,500 / 3,000 / 800 mm/min Planetary rotation speed (C-axis): 5–250 rpm Total drive approx.: 15 kW – 400 V – 50 Hz Machine weight approx.: 5,000 kg Accessories / special equipment: • CNC path control replaced in 2007 with an ADCOS CNC control, model CNC 400, with large screen and direct programming at the control panel, with electronic handwheel for fine adjustment of axes: X = table longitudinal, Y = grinding head cross, Z = quill vertically/stroke, C = rotary axis spindle/quill, U = automatic feed, W = cross beam vertical adjustment • Z-axis as rapid traverse for shorter machining times, plunge grinding, face grinding, preselection of reversals (approach + teach-in), and continuously variable stroke speed, acting as a 3rd positioning axis • U-axis as manual and controlled feed axis (radial), at the grinding head, with electronic display of infeed amount • 1 grinding motor built in with spindle speed approx. 30,000 rpm • Integrated acoustic grinding contact indicator KSV 5 • Separate coolant system with belt filter, electrical control cabinet and switch cabinet free-standing, separate hydraulics, central lubrication, dust extraction, and much more Condition: very good, demonstration-ready under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1990, x-axis travel 400 mm y-axis travel 250 mm Workpiece height mm Control system CNC 314 ELESTA Total power requirement 15 kW Machine weight approx. 5500 kg Space requirement approx. m H A U S E R (Switzerland) CNC-controlled coordinate grinding machine Type S 3 – CNC 314 Year of manufacture approx. 1990 # S 32086 _____ Table size approx. 600 x 380 mm Table load capacity approx. 300 kg Table travel longitudinal max. (X) 400 mm Table travel cross max. (Y) 250 mm Vertical adjustment of grinding slide max. (W) 450 mm Grinding spindle stroke max. (Z) 120 mm Grinding head slide stroke, hydraulic 15 – 12,000 mm/min Height between table and grinding spindle min./max. -75 / +485 mm Projection of grinding spindle 350 mm Conical grinding max. 16° Grinding Ø, bore max. approx. 230 mm 18 spindle speeds, depending on spindle motor steplessly adjustable 4,500–80,000 rpm Planetary speed (C), steplessly adjustable 5–250 rpm U-axis, radial infeed 6 mm Laedpfx Afjt Hxcnenec Total drive approx. 15 kW – 400 V – 50 Hz Weight/Total weight approx. 4,000 / 5,500 kg Accessories / Special equipment: • CNC path control system type CNC 314 (ELESTA –POSELESTA II) with monitor, for 4 axes (=X Y C + U-axis), with circular and linear interpolation in 2 ½ dimensions (X Y + C). Teach-in programming directly on the machine. Error messages, RS 232 interface with various subprograms, as well as manual axis movement via control panel or with electronic hand-held unit. • Separate digital readout for the Z-axis, Z-axis with rapid traverse device • Programmable C-axis for simple contours and pockets, grinding of radii • U-axis as manual and controlled infeed axis, radially mounted on the grinding head with digital readout, automatically grinds varying bore diameters • 2 grinding motors up to a spindle speed of 80,000 rpm • Built-in acoustic grinding contact indicator KSV 5 • HI-Cut device (oil cooling) and automatic fire protection system Krafft Buer • Separate coolant system with band filter, separate hydraulic unit with cooler • Separate electrical cabinet, central lubrication, various collets, operating tools, etc. Unfortunately, no further accessories currently available. Condition: very good / demonstration-ready under power Delivery: ex stock here – as inspected Payment: strictly net – upon receipt of invoice