Brandt Highflex 1440 pirkti naudotą (458)

Būklė: naujas, Various bimetal bandsaw blades, HSS, in the following dimensions: 1735 x 13 x 0.9 mm 1630 x 13 x 0.9 mm 1440 x 13 x 0.65 mm 1138 x 13 x 0.65 mm 2375 x 20 x 0.9 mm 2465 x 20 x 0.9 mm 2085 x 20 x 0.9 mm 2130 x 20 x 0.9 mm 2140 x 20 x 0.9 mm 1900 x 20 x 0.9 mm Pgsdpfx Ahjc R Tyfscjt 2000 x 20 x 0.9 mm 2750 x 27 x 0.9 mm 2835 x 27 x 0.9 mm 2850 x 27 x 0.9 mm 2950 x 27 x 0.9 mm 3150 x 27 x 0.9 mm 3320 x 27 x 0.9 mm 2950 x 27 x 0.9 mm 2910 x 27 x 0.9 mm 2450 x 27 x 0.9 mm 4530 x 27 x 0.9 mm 4500 x 27 x 0.9 mm 4400 x 34 x 1.5 mm 4640 x 34 x 1.1 mm

Gamybos metai: 2009, būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, 1 unit liquid ring vacuum pump. Please read the description carefully to the end!! The pump is NOT suitable for: Water, food industry, and non-corrosive media. For these applications, more cost-effective materials such as 1.4408 or 1.4571 are better suited. Attention!! The pump does NOT have explosion protection certificates. It is also not possible to replace the motor, as this is a special long shaft motor. The mechanical seal also does NOT have EX certificates! The pump is made of the special alloy Alloy 59!! This alloy is used when conventional chromium-nickel steels are no longer sufficient in terms of corrosion resistance. In particular, it is used where chloride-induced pitting and crevice corrosion, as well as stress corrosion cracking, are problematic. Alloy 59 is used for: Environmental technology, chemical industry (chemical processes with oxidizing and reducing acids, resistance to moist chlorine gas), and waste incineration plants. Type 2.4605 is mainly used in the chemical industry, pulp and paper industry, and in flue gas desulfurization plants. Excellent resistance against mineral acids such as nitric, phosphoric, sulfuric, and hydrochloric acids, and particularly against sulfuric/hydrochloric acid mixtures. Typical applications include: -Plant components for organic chemical processes involving chlorinated media, especially when chloride-based catalysts are used -Multipurpose plants in the chemical industry Pgjdeigqutepfx Ahcst -Plant parts in the fine chemicals and pharmaceutical industries -Scrubbers, heat exchangers, dampers, fans, and agitators for flue gas desulfurization systems (FGD) in fossil-fueled power plants and waste incineration plants -SO2 scrubbers for marine diesel engines -Components for seawater and concentrated brines -Equipment and components for geothermal and sour gas applications -Reactors for acetic acid and acetic anhydride -Reactors for hydrofluoric acid -Sulfuric acid coolers -Piping in geothermal power plants -Components in flue gas desulfurization systems Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow rate: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 Volt Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings new, mechanical seal refurbished by specialist company. Weight: 121 kg Dimensions: Length 960 mm, width 370 mm, height 370 mm Connection: DN 50 (2")

Būklė: naudotas, Corner transfer unit, roller conveyor, roller track, powered roller conveyor, roller conveyor line, roller conveyor with stripping feeder, transfer station -Manufacturer: Grenzebach, transfer station roller conveyor type WRS -Drive motor for roller conveyor: 0.18 kW, 88 rpm -Drive motor for conveyor belt: 0.37 kW, 71 rpm -Intermediate dimension: 1500 mm -Conveying length: 1250 mm -Axle spacing: 250 mm -Roller spacing: 250 mm -Rollers: rubber-coated -Lift: pneumatic -Belt conveyor length: 1400 mm / belt spacing 500 mm -Transport dimensions: 1700/1440/H690 mm -Weight: 348 kg Pgedpfx Ahstlzgzecet

Būklė: naujas, Semi-automatic bandsaw with double-sided mitre cutting R/L 60° Including hydraulic blade tension indicator Minimum quantity lubrication system retrofittable Cutting capacity 90° round: 280 mm / flat: 410 x 280 mm / square: 280 mm 45° R round: 280 mm / flat: 310 x 150 mm / square: 270 mm 45° L round: 280 mm / flat: 330 x 100 mm / square: 280 mm 60° R round: 210 mm / flat: 205 x 100 mm / square: 190 mm 60° L round: 220 mm / flat: 225 x 100 mm / square: 210 mm Material support height: 756 mm Saw blade dimensions: 3800 x 0.9 x 27 mm Cutting speed: 20–120 m/min Drive power: 2.2 kW Dimensions (LxWxH): 2130 x 1070 x 1440 mm Pgedpfx Ajd Dpzgehcjt Weight: 530 kg Price on request

Būklė: labai geros būklės (naudotas), Gamybos metai: 2016, veikimo valandos: 1 200 h, Technologia zaawansowanej cienkowarstwowej piezoelektryki TFP (Thin Film Piezo) o wysokiej precyzji Ekstremalna dokładność pozycjonowania kropli dla niezrównanej szczegółowości linii i jakości wydruku fotograficznego Głowica drukująca o szerokości 1 cala wyposażona w 720 dysz na każdy kolor Pedpfx Ajqrq Uyshcogt Automatyczne przełączanie pomiędzy dwoma technologiami czarnego tuszu – Photo Black oraz Matte Black Możliwość generowania kropel o zmiennej wielkości (od 3,5 pikolitra), co znacznie skraca czas druku i optymalizuje jakość wydruków fotograficznych Maksymalna rozdzielczość druku: 2880 x 1440 dpi dla niezwykle ostrych tekstów i rysunków technicznych Technologia druku: Technologia atramentowa Epson MicroPiezo® Maksymalna rozdzielczość druku: Papier: 720 x 720 dpi Folia: 1440 x 720 dpi Prędkość druku: Do 16 stóp (5m) na minutę przy rozdzielczości 720 x 720 dpi (na papierze) Typ tuszu: SurePress AQ Ink Paleta kolorów: Cyan, Magenta, Yellow, Black, Green, Orange, White Konfiguracja atramentu: Przemysłowy, wodny atrament pigmentowy z powłoką żywiczną firmy Epson (SurePress AQ) Temperatura pracy: od 18°C do 28°C (64°F do 82°F) Wilgotność pracy: 35–55% (bez kondensacji) Poziom hałasu: 75 dB lub mniej (z wyłączeniem sygnałów alarmowych) Wymiary: 4 190 mm x 2 050 mm x 2 130 mm (szer. x gł. x wys.) Waga: 2 250 kg (4 960,40 lbs) Pojemność pojedynczego zbiornika z tuszem: 700 ml Okres przydatności tuszu: 2 lata od daty produkcji nadrukowanej na opakowaniu lub 6 miesięcy od otwarcia Zasilanie: Napięcie nominalne +/- 10% (180-220V) Napięcie znamionowe: AC (system trójfazowy) 200V Częstotliwość znamionowa: 50–60Hz Prąd znamionowy: 30A Zakres częstotliwości wejściowej: Nominalny +/- 1%

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 117.094, Gamybos metai: 2018, veikimo valandos: 6 303 h, keliamoji galia: 10 000 kg, kėlimo aukštis: 3 700 mm, kuro tipas: elektrinis, stiebo tipas: dupleksas, statybinis aukštis: 2 950 mm, galia: 34 kW (46,23 AG), tuščias svoris: 18 730 kg, bendras ilgis: 4 200 mm, pavaros tipas: Elektro, statybos plotis: 1 660 mm, Kompaktiškas krautuvas – elektrinis Važiuoklės numeris: 117.094 Naudingosios apkrovos centras: 600 Stiebo tipas: dvigubas Greičio klasė: 15 Būklė: paruoštas naudoti ir visiškai funkcionalus Techninė būklė: normali Priekinių padangų tipas: vientisos guminės Priekinių padangų būklė: 60–80 % Galinių padangų tipas: superelastinės Galinių padangų būklė: 60–80 % Baterijos įtampa: 120 V Pgedjzq Ipljpfx Ahcst Baterijos talpa: 1440 Ah Baterijos tipas: PzS Baterijos pagaminimo metai: 2018 Baterijos būklė: 60–80 % Aprašymas: mašina visiškai patikrinta dirbtuvėje, išvalyta, atlikta nauja UVV ir techninė apžiūra! Šoniniai poslinkio įtaisai, atraminiai kaiščiai, ritės atraminis įtaisas su šoniniu poslinkiu, reguliavimo diapazonas +/- 150 mm, ritės atraminio įtaiso ilgis: 800 mm, ritės atraminio įtaiso plotis: 70 mm 3-iasis vožtuvas, priekinis darbinis žibintas, atitinka STVZO reikalavimus, pilna kabina, CE sertifikatas, LED, sėdynė, - apkrovos slopinimo sistema (įjungiamas elektriniu būdu) – papildoma hidraulika (2 proporcingi + 1 skaitmeninis papildomas valdymo kontūras) – 2 LED darbiniai žibintai ant stiebo – apšvietimas pagal STVZO reikalavimus – patogi sėdynė su pneumatine pakaba – LED signalinė lemputė – galinio vaizdo kamera – priekinė kamera – atbulinės eigos signalas – „Blue Spot“ gale – „Blue Spot“ priekyje – buferio prailginimas keičiamai baterijai (1395 Ah)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2001, Gildemeister NEF 320 K cycle-controlled lathe, Siemens Sinumerik 810 DL control, year of manufacture 2001, in very good original condition Technical specifications: Year of manufacture: 2001 Swing diameter over bed: 320 mm Swing diameter over cross slide: 150 mm Distance between centers: 750 mm Cross travel: 185 mm Feed rate X: 4 m/min Feed rate Y: 4 m/min X-axis rapid traverse: 8 m/min Psdpjwx Rbpefx Ahcogt Y-axis rapid traverse: 10 m/min Spindle nose DIN 55027 size 6 Spindle bore: 52 mm Drive power (100% duty cycle): 7 kW Speed range: 14-3550 rpm (2 steps) Tailstock quill diameter: 70 mm Tailstock quill travel: 120 mm Tailstock quill taper: ISO MK 5 Dimensions: 2600 x 1440 x 1440 mm Machine weight approx.: 2.0 t Accessories and Equipment: About the machine: Offered is a Gildemeister NEF 320 K lathe with cycle automation, year of manufacture 2003, in very good condition. The machine is of course fully functional. The carriages all move very smoothly and evenly. Even at high speeds, the Gildemeister runs very quietly. This newer generation of lathes is very user-friendly and allows for surface finishes comparable to grinding. The machine comes from a large company's training workshop. Take the opportunity to inspect this machine under power at our site and see its condition for yourself.

Būklė: naudotas, TECHNICAL DATA - Centrifugal filtration system - Capacity for contaminated liquids: 2000 [l] - Capacity for clean liquids: 350 [l] - Required space: 2700 x 1440 x 2850 [mm] - Machine weight: 1610 [kg] Pgedpfx Aow H Dv Njhcet

Būklė: naujas, Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, įvesties srovės tipas: trifazis, bendras aukštis: 690 mm, bendras plotis: 325 mm, bendras ilgis: 890 mm, įėjimo įtampa: 400 V, įžeminimo kabelio ilgis: 3 000 mm, bendras svoris: 42 kg, garantijos trukmė: 24 mėnesiai, suvirinimo srovė esant 60 % darbo ciklui: 250 A, Hello, we are the Belgian importer for the Stayer range and have a large stock of this unit available. Quantity-based pricing available: - 1 pc – €1,800 excl. VAT per unit - 3 pcs – €1,440 excl. VAT per unit - 10 pcs – €1,080 excl. VAT per unit Synergic MIG-MAG welding machine, compatible with stick electrode (MMA) and spot welding. - Easy polarity reversal for flux-cored wire. - Two high-brightness displays for simultaneous, real-time monitoring of current and voltage. - Manufactured according to the strict European standards 2014/35/EU, 2014/30/EU, 2011/65/EU and IEC 60974. - Suitable for 3x400V generators. Can handle voltage fluctuations of ±17%. - Professional wire feeder with 60W motor, reliable and stable drive, designed for large 15 kg reels. Includes wire drive rollers with grooves for 0.6 mm, 0.8 mm, and 1 mm diameters. Specifications: Power output: 250 A Voltage: 230 / 400 V Duty cycle: 60% Stick electrodes: 1.6 - 6.0 mm Wire diameter: 0.6 - 0.8 - 1.0 mm Wire reel capacity: 5 – 15 kg Compatible with generator: 12 kVA / 230V ±17% Dimensions: 89 x 69 x 32.5 cm Weight: 42 kg DINSE terminal 1/2” (35–50 mm²) Power cable: 2 m x 2.5 mm² Earth cable + clamp: 3 m – 25 mm² Electrode cable + holder: 3 m – 25 mm² MIG torch: 25 AK Pgsdpsuh A U Ajfx Ahcst Gas hose: 3 m x2 wire guide (0.8 – 1.0 mm)

Būklė: naudotas, Safe - STRACKE Security Cabinet Security Level / Resistance Grade III 1 key lock VdS Class 2(B) 1 mechanical combination lock 2(B) with armored keyhole protection Internal dimensions: W=650 mm, H=1300 mm, D=445 mm Interior with partition wall and collecting tray - Bolt mechanism with 3-sided locking - Key lock with one key (2 keys available) - With deposit chute Ø 160 mm - 19 deposit containers made of plastic Ø140 x 270 mm Pgsdswki A Aspfx Ahcst - Operating manual External dimensions: W=790 mm, D=675 mm, H=1440/1800 mm Weight: 1330 kg

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036721, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, tarpas tarp stulpų: 1 110 mm, darbinio tūrio: 1 078 cm³, įpurškimo slėgis: 1 877 juosta, injekcijos svoris: 981 g, atvērimo eiga: 3 200 mm, plokštės aukštis: 1 540 mm, pavaros tipas: Hydraulisch, laisvas tarpatramis: 3 200 mm, įrankio svoris: 2 200 000 g, Injection Moulding Machines Directly from the Manufacturer! As the manufacturer KraussMaffei, we offer you here our inspected and flexible stock machines: The hydromechanical two-platen clamping unit of the GXW machine sets new standards in terms of quality and productivity. The sophisticated GuideX sliding shoe perfectly absorbs forces and extends the lifetime of the moulds. The innovative GearX locking system engages immediately and reliably. Powerful, user-friendly and highly stable in value. TECHNICAL DATA: KM 650 / 2000 / 2000 GXW G06 (Order 38618339) CONTROL SYSTEM - MC 6 with 24” TFT colour display with multitouch functionality CLAMPING UNIT - Clamping force kN 6500 - Max. mould open force kN 455 - Tie bar spacing (h x v) mm 1110 x 960 - Platen size (h x v) mm 1540 x 1440 - Mould installation height min.-max. mm 1550 (without center platen) - Daylight mm 3200 - Max. opening stroke mm 1650 - Max. mould weight kg 22000 INJECTION UNIT 1 SP2000 - Screw diameter/type mm 60 / Thermoplastic - Effective L/D ratio 23.3 - Injection pressure bar 2420 - Shot volume cm³ 792 - Shot weight max. stroke PS g 720 - Injection speed mm/s 140 - Injection flow rate cm³/s 396 - Screw drive speed 1/min 285 - Plasticising rate g/s 72.2 - Nozzle contact force kN 82 INJECTION UNIT 2 SP2000 - Screw diameter/type mm 70 / Thermoplastic - Effective L/D ratio 20 - Injection pressure bar 1877 - Shot volume cm³ 1078 - Shot weight max. stroke PS g 981 - Injection speed mm/s 140 - Injection flow rate cm³/s 539 - Screw drive speed 1/min 285 - Plasticising rate g/s 98.3 - Nozzle contact force kN 82 ELECTRICAL SPECIFICATIONS - Connected load kW 341 - Power supply V / Hz 400 / 50 3 phases with neutral conductor WEIGHT AND DIMENSIONS - Net weight t 43.5 - Length x width x height m 11.89 x 3.22 x 2.77 ADDITIONAL EQUIPMENT - Wear-resistant plasticising unit - BluePower full insulation for plasticising cylinder - Open nozzle - BluePower ServoDrive - Pneumatic valve 1-fold (BWAP), 1-fold (FWAP) - Pneumatic cascade valves 6-fold (BWAP), 6-fold (FWAP) - Hydraulic core pull 2-fold (BWAP), 2-fold (FWAP) - Mould heating 96-fold (3.5 kW) - Euromap interface for handling E18 - Euromap interface (central computer) E67, E77, E78, E63, E82.1 - Adaptive Process Control (APC+) - Graphic analysis package - Sliding table with turning unit, servo-driven - Vertical center platen - Parallel clamping and opening movement during injection process with platen parallelism control between FWAP and center platen or BWAP and center platen Pgsdpfjw U N Ixjx Ahcot - ColorForm interface—signal interface for connecting an RPM system - Electrical interface for HRS Flexflow system - Electrical interface and hydraulic valves for "1-K dummy operation" - Interface for connecting a CoMo-Kistler Injection Basic System with good/reject part separation The machine is located at our factory in Parsdorf and is available at short notice. Additional options available upon request. We look forward to your enquiry.

Būklė: naujas, Gamybos metai: 2025, Matmenys (ilgis/plotis/aukštis) 3120 x 1100 x 1600 mm Svoris 2000 kg Bendras galios poreikis 6,4 kW „Hacker“ peilių šlifavimo staklės GRINDER 1700 AUTO MAGNETIC PLC - Maksimalus apdirbimo plotis 1700 mm - Automatinis apdirbimo procesas pagal X ašį - Automatinis Z ašies reguliavimas su servo varikliu ir PLC valdikliu - Magnetinis tvirtinimo stalas 200 x 1700 mm - Šlifavimo kampas +/- 90° - Šlifavimo disko apsisukimų dažnis 1440 aps./min. - Šlifavimo disko skersmuo 205 x 115 x 145 mm - Padavimo greitis 3–9 m/min., reguliuojamas be žingsnių, naudojant dažnio keitiklį - Variklis 5,5 kW / 400 V - Padavimo variklis 0,75 kW - Aušinimo skysčio siurblio variklis 90 W Pjdpevz E N Isfx Ahcogt - Aušinimo skysčio tiekimo įtaisas iš viršaus, naudojant plastikinius lanksčius žarnynus, neleidžia peiliams perkaisti - Halogeninė lemputė su reguliuojamu laikikliu - Matmenys: ilgis = 3120 mm, plotis = 1100 mm, aukštis = 1600 mm - Svoris 2000 kg

Būklė: naujas, Gamybos metai: 2025, Matmenys (ilgis/plotis/aukštis) 4600 x 1000 x 1550 mm Svoris 2500 kg Bendrasis energijos poreikis 8,5 kW Obliavimo peilių šlifavimo staklės GRINDER 3000 AUTO MAGNETIC - maks. apdorojimo plotis 3000 mm - automatinis apdorojimo ciklas X ašies kryptimi - automatinis Z ašies padėties reguliavimas - magnetinis tvirtinimo stalas 200 x 3100 mm - šlifavimo kampo reguliavimas +/- 90° - šlifavimo disko apsisukimų dažnis 1440 aps./min. - šlifavimo diskų skersmuo 200 x 100 x 100 mm - padavimo greitis 3–9 m/min, reguliuojamas be pakopų, naudojant dažnio keitiklį - variklis 7,5 kW / 400 V - padavimo variklis 0,75 kW - aušinimo skysčio siurblys 90 W - aušinimo sistema neleidžia peiliams perkaisti - halogeninė lemputė su reguliuojamu laikikliu - matmenys: ilgis = 4600 mm, plotis = 1000 mm, aukštis = 1550 mm Pjdpsvz E U Dofx Ahcjgt - svoris 2500 kg

Gamybos metai: 2025, būklė: naujas, Dimensions (Length/Width/Height): 3000 x 3000 x 1650 mm Weight: 850 kg Total power requirement: 16 kW Vacuum membrane press RIBEXVAC ECO-B - Table dimensions: 2435 x 1440 mm - Working area: 2275 x 1230 mm - Max. working height: 300 mm - Absolute vacuum: 760 mm/Hg = -20 mbar - Vacuum pump suction capacity: 1 kg per 1 cm² - Vacuum pump motor power: 1.5 kW - Vacuum pump speed: 1450 rpm - Vacuum pump capacity (Becker): 105 m³/h - Noise emission level: 68 dB(A) - Max. temperature: 150ºC - Total power: 16 kW - Work cycle: 4 – 5 min - Manual control via push buttons - Viewing window - CE version - Dimensions: L=3000, W=3000, H=1650 mm - Net weight: 850 kg Pedpjv A E Nwofx Ahcsgt Standard features: - Ergonomic machine design - CE conformity - Electrically adjustable upper section - Includes 200 magnetic material supports - Worktable equipped with safety sensors - Automatic temperature control - Short operational times - Viewing window - Low energy consumption with quartz heating tubes - Roller holder for PVC film

Būklė: geras (naudotas), Hydraulic unit, hydraulic pump, hydraulic power pack, universal power unit, hydraulic station, - Handover: in as-is condition, as inspected - Directional control valve: missing, see photos - Manufacturer: Huss, hydraulic power unit with additional hand pump Pedpfx Aev Rm Rlohcsgt - Pressure: 60 bar - Flow rate: 15 l/min - Motor: 4 kW / 1440 rpm - Hydraulic tank - Accumulator - Individual components: see photos - Dimensions: 1065/380/H510 mm - Weight: 135 kg

Būklė: naujas, Gamybos metai: 2026, Free delivery up to 150 km. Prod-Masz folding machine available on-site for demonstration and immediate pickup. Professional instruction provided on-site. Folding machine ZGR2500/1.5 - Working width: 2640 mm - Sheet thickness up to 1.5 mm - Bending beam: 24 mm - Bending angle up to 145° - Gas pressure springs - Degree scale - Stop for pre-set bending angles - Front depth stop - Sheet metal tray - Weight approx. 500 kg Other sizes (1000, 1440, 2140, 2640, 3140, 3640, 4140 mm) available on request Optional accessory: roller shear (up to 0.8 mm) €350 All prices are subject to an additional 19% VAT. CE certificate Self-collection Shipping within Germany €240 Pgedpfx Ahezmmi Necet

Būklė: naudotas, Gamybos metai: 2021, keliamoji galia: 8 000 kg, kėlimo aukštis: 4 215 mm, bendras ilgis: 6 550 mm, · Load centre distance: 900 mm · Seat height, EGO cabin: 1440 mm · Load spacing: 760 mm · Track width (centre-to-centre), front – rear: 1500 – 1360 mm · Turning radius, outer: 3700 mm · Turning radius, inner: 300 mm · Height with cab tilted, max. EGO cab: 3020 mm · Width with cab tilted, max. EGO cab: 3225 mm · Min. aisle width for 90° stacking: 6450 mm · Lifting height: 3500 mm · Mast tilt, forward – backward α – β: 6–9 degrees · Axle load front, unladen: 5500 kg · Axle load front, with rated load: 18400 kg Pedpfsy Ravtjx Ahcjgt · Axle load rear, unladen: 6200 kg · Axle load rear, with rated load: 1300 kg · Brake dimensions, front – rear: 8.25-R15 – 8.25-R15 in · Air pressure, front – rear: 1.0 – 1.0 MPa · Steering system type – control: Hydraulic servo steering wheel · Service brake system type – braked wheels: Oil-cooled multi-disc brakes – drive wheels · Parking brake system type – braked wheels: Dry, spring-actuated disc brake – drive wheels · Hydraulic pressure max.: 20 MPa · Hydraulic oil capacity: 155 l · Drive axle – type: Differential and hub reduction · Drive motor, continuous rating: 2 x 11 kW · Speed control, principle – modes: High-frequency MOSFET, AC – stepless · Pump motor, hydraulics, duty cycle – load ratio: 1 x 42 kW – S3 15% · Pump motor, brakes, duty cycle – load ratio: 1 x 4.2 kW – S3 15% · Pump monitoring, principle – mode: High-frequency MOSFET, AC – stepless · Lifting speed, unladen: 0.32 m/s · with rated load: 0.31 m/s · Lowering speed, unladen: 0.45 m/s · with rated load: 0.50 m/s · Travel speed, fwd/rev, unladen: 15 km/h · with rated load: 13 km/h · Gradeability, max. unladen: 37% · with rated load: 21% · Gradeability at 2 km/h, unladen: 29% · with rated load: 16% · Drawbar pull: 40 kN

Būklė: naujas, didžiausias leistinas svoris: 400 kg, bendras svoris: 2 025 kg, kuras: dyzelinas, spalva: balta, emisijos klasė: Euro 6, sėdimų vietų skaičius: 3, krovimo vietos ilgis: 1 440 mm, krovinių skyriaus plotis: 1 220 mm, krovos erdvės aukštis: 1 000 mm, Įranga: ABS, Android Auto, Apple CarPlay, Bluetooth, borto kompiuteris, centrinis užraktas, oro kondicionavimas, oro pagalvė, priešrūkiniai žibintai, stumdomos durys,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Technical Specifications: Table clamping surface: 300 x 700 mm Electro-magnetic chuck: 300 x 600 mm Max. travel: 640 mm x 320 mm Distance spindle centre / table max.: 520 mm Max. workpiece weight*: 200 kg Grinding wheel: 300 x 30 x 75 mm Table speed, hydraulic: 2 – 18 m/min Automatic cross feed: 0.5 – 10 mm/stroke Rapid traverse, cross: 990 mm/min Handwheel graduation: 0.02 mm Automatic vertical feed: 0.01 / 0.1 mm Rapid traverse, vertical: 360 mm/min Handwheel graduation: 0.01 mm Grinding spindle motor: 4.0 kW Spindle speed: 1440 rpm Hydraulic pump motor: 1.5 kW Dimensions (L x W x H): 2000 x 1650 x 1850 mm Weight approx.: 1400 kg Surface Grinding Machine Bernardo FSM 3060 AHD 2-axis digital readout ES-12 H with LCD display CNC control with touchscreen operation Electronic handwheel Psdpfeyut A Tsx Ahcegt Grinding wheel Wheel flange LED work light Electro-magnetic chuck Balancing stand Balancing arbor Protective covers Demagnetizing device Coolant system Diamond dresser Machine pads Central lubrication Operating tools

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, įėjimo įtampa: 400 V, bendras svoris: 80 kg, įėjimo srovė: 11 A, Condition: Practically NEW – used only as a demonstration unit (see photos of the very clean interior) Suitable for 2 kg PUR containers (cartridges/blocks) Ideal for edge banding machines, profile wrapping, or other adhesive processes. MOD Technology (Melt-on-Demand): Melts only the required amount of adhesive, preventing PUR adhesive from burning. Compressed Air/Protective Gas: Operation requires dried compressed air or CO2 (important for PUR processing). Operation: Simple and robust membrane keypad Electrical Connection: 3LPE 400V 50/60Hz Rated Power (Pmax): 4200 W Max. Current (Imax): 11 A Weight: approx. 80 kg (according to manufacturer) Protection class: IP32 The unit is fully operational, extremely clean, and ready for immediate use. Pgodpfx Ahsy D Hfzocot Location: Líšťany 33035, Czech Republic (approx. 50 km from the German border / Waidhaus) Keywords / Suitable for machinery from: Homag, IMA, Biesse, Brandt, Holz-Her, SCM, Stefani, Hebrock, Felder, edge banding machine, edge bander, PUR adhesive, pre-melter, profile wrapping.

Būklė: naujas, Roller diameter / mm Throat depth / mm Psdpfxoy Eh A Ds Ahcsgt Workpiece height / mm Vertical Bandsaw – Model P70.110 Capacity 90° (mm) Height: 700 mm Width: 1100 mm Length: 6000 mm Motors Main motor (saw blade drive): 5.5 kW Hydraulic motor: 1.5 kW Coolant pump: 0.25 kW Feed servo motor: 1.5 kW Chip conveyor: 1.1 kW Additional technical data Saw blade size: 7770 × 54 × 1.6 mm Material feed height: 1440 mm Hydraulic oil tank capacity: 40 l Coolant tank capacity: 190 l Machine dimensions (H × W × L): 4500 × 4000 × 8700 mm Weight: 20,000 kg Standard equipment - Hydraulically driven chip brush - Speed control device (blade speed adjustable via frequency inverter) - Servo feed system (1–500 mm/min) - Hydraulic saw blade tensioning - Saw blade breakage detection and stop system - Touchscreen operating interface - Laser line display (laser marking) - Scraper-type chip conveyor - Hydraulically movable arm (automatic) - Chip cart / chip container - Material alignment plunger (for aligning material) Images are for reference only and do not represent a true-to-scale depiction of the machine.

Būklė: naujas, Gamybos metai: 2026, AUTHORIZED DEALER Prod-Masz company. Pgodpszuvbqjfx Ahcst Free delivery within 150 km. YOUR competent partner for FOLDING MACHINES Folding machine ZGR1400/1.2 from Prod-Masz available on site for testing and immediate pickup. On-site professional instructions included. Technical data: - Working width: 1400 mm - Sheet thickness up to 1.2 mm - 30% more sheet thickness for non-ferrous metals - Bending angle up to 145° - Bending beam: 15 mm - Clearance: 80 mm - Degree scale - Stop for preset bending angles - Sheet storage shelf - Front depth stop - Weight: approx. 125 kg Other sizes (1000, 1440, 2140, 2640, 3140, 3640, 4140 mm) available on request Accessories – Roller shear (up to 1.2 mm) 350 EUR Shipping within Germany: 180 EUR All prices plus 19% VAT. Self-collection possible CE Certificate Warranty: 12 months. Self-pickup

Būklė: geras (naudotas), Conveyor belt, belt conveyor, transport belt, belt conveyor system - Belt width: 2x 50 mm - Width: adjustable - Conveyor length: 1440 mm - Drive: 0.37 kW Pgjdeb A Hdgspfx Ahcot - Speed: 71 rpm - Conveyor belt rotatable via servo motor - Height: adjustable - Dimensions: 1440/550/H950 mm - Weight: approx. 150 kg

Gamybos metai: 2009, būklė: geras (naudotas), cross transfer unit, roller conveyor, roller track, powered roller conveyor, roller conveyor, roller track with discharge conveyor - Robust construction - Electrically driven - Drive motor for roller conveyor: 0.37 kW, 71 rpm - Drive motor for discharge belt: 0.37 kW, 88 rpm - Roller width: 1,440 mm - Conveyor length: 1,400 mm - Discharge belt length: 1,400 mm Pgodpsb A Himofx Ahcet - Pneumatic lifting - Roller diameter: 105 mm - Rollers: rubber-coated - Shaft diameter: 25 mm - Conveyor height: 950 mm, adjustable - Drive: via timing belt - Dimensions: 1,450/1,650/H1,000 mm - Weight: 420 kg

Būklė: geras (naudotas), Radialinis ventiliatorius, dulkių ištraukimo pūstuvas, ventiliatorius, ištraukimas, dulkių pūstuvas Pgsdpfx Aeb Ilxdehcjt - Variklio galia: 3,6 kW - Apsisukimų skaičius: 1440 aps./min - Tūrinė srovė: apie 6000 m³/h - Įvado jungtis: Ø 450 mm - Išvado jungtis: Ø 450 mm - Sparnuotė: Ø 670 mm - Kiekis: 1 vnt - Matmenys: 1200/1100/H1350 mm - Svoris: 242 kg