Skystojo žiedo vakuuminis siurblys Lydinys 59

BUSCH 7,5 kW ; 195m³/h ; 33mbar Dolphin LC 0220 A ZZO XX ZZ

1 unit liquid ring vacuum pump.
Please read the description carefully to the end!!

The pump is NOT suitable for:
Water, food industry, and non-corrosive media.
For these applications, more cost-effective materials such as 1.4408 or 1.4571 are better suited.

Attention!!
The pump does NOT have explosion protection certificates.
It is also not possible to replace the motor, as this is a special long shaft motor.
The mechanical seal also does NOT have EX certificates!

Gbodpfxoigqute An Heu
The pump is made of the special alloy Alloy 59!!
This alloy is used when conventional chromium-nickel steels are no longer sufficient in terms of corrosion resistance.
In particular, it is used where chloride-induced pitting and crevice corrosion, as well as stress corrosion cracking, are problematic.

Alloy 59 is used for: Environmental technology, chemical industry (chemical processes with oxidizing and reducing acids, resistance to moist chlorine gas), and waste incineration plants. Type 2.4605 is mainly used in the chemical industry, pulp and paper industry, and in flue gas desulfurization plants.

Excellent resistance against mineral acids such as nitric, phosphoric, sulfuric, and hydrochloric acids, and particularly against sulfuric/hydrochloric acid mixtures.

Typical applications include:

-Plant components for organic chemical processes involving chlorinated media, especially when chloride-based catalysts are used
-Multipurpose plants in the chemical industry
-Plant parts in the fine chemicals and pharmaceutical industries
-Scrubbers, heat exchangers, dampers, fans, and agitators for flue gas desulfurization systems (FGD) in fossil-fueled power plants and waste incineration plants

-SO2 scrubbers for marine diesel engines
-Components for seawater and concentrated brines
-Equipment and components for geothermal and sour gas applications
-Reactors for acetic acid and acetic anhydride
-Reactors for hydrofluoric acid
-Sulfuric acid coolers
-Piping in geothermal power plants
-Components in flue gas desulfurization systems

Manufacturer: Busch
Type: LC 0220 A ZZO XX ZZ
Volume flow rate: 195 m³/h
Motor power: 7.5 kW
Voltage: 400/690 Volt
Speed: 1440 rpm
Vacuum: 33 mbar
Material: 2.4605 (Alloy 59) NiCr23Mo16Al
All ball bearings new, mechanical seal refurbished by specialist company.
Weight: 121 kg
Dimensions: Length 960 mm, width 370 mm, height 370 mm
Connection: DN 50 (2")

Skelbimas buvo automatiškai išverstas. Galimos vertimo klaidos.