Ami Fördertechnik Flachriemen Mit Antrieb pirkti naudotą (11 280)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking with roof supports: Hot-dip galvanized bolted system Scope of delivery: - 9 rack uprights, height 4,230 mm, with foot section, usable depth 1,200 mm - 27 cantilever arms with a usable depth of 1,200 mm, equipped with deflectors - 9 roof supports with a projection of 1,500 mm, pre-drilled for customer-supplied roof construction (*Excludes timber purlins and trapezoidal sheets for roof construction) - Includes longitudinal and diagonal bracing for 1,500 mm upright spacing - Incl. fastening materials (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged components!) - (*Spare parts re-orderable and extension possible at any time) - (*Available in larger quantities: approx. 50 uprights in stock) Detailed description: - Sturdy steel construction made from IPE profiles - All components’ surfaces are hot-dip galvanized - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (max. snow load 1.85 kN/m², wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (max. snow load 1.85 kN/m², wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - 3 bolt-on cantilever arms per upright, 1,200 mm deep, with deflectors = 4 storage levels above each other - Including longitudinal and diagonal bracing with 1,500 mm axle spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With assembly instructions and load labels C4 in accordance with DIN standards - Expert telephone advice - Made in Germany - Short delivery times - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight service with advance delivery notification. Material is packaged for ease of unloading. The foundation must be concrete, level, suitable for doweling, and capable of bearing all imposed loads. Floor conditions and load-bearing capacity as well as any necessary official permits are to be checked and ensured by the customer. Lhodpoh R Taqsfx Akvsh The uprights must be anchored to the floor by the customer; wall anchoring is neither required nor recommended. According to trade association guidelines, uprights should have a minimum 500 mm projection above the top storage level.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever Rack with Roof Supports: Hot-dip Galvanised Bolted System Scope of Delivery: - 9 upright frames, height 4,230 mm with base segment, usable depth 1,200 mm - 27 cantilever arms with 1,200 mm usable depth, with deflectors - 9 roof supports with 1,500 mm cantilever, pre-drilled for on-site roof construction (*Excludes timber purlins and trapezoidal sheets for the roof) - Includes longitudinal and diagonal bracing for 1,500 mm frame spacing Lhedpfx Asmhhy Nokveh - Incl. fastening material (excluding floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts reorderable and extension possible at any time) - (*Offer for larger quantities available: approx. 50 uprights in stock) Detailed Description: - Robust steel construction made from IPE profiles - All components hot-dip galvanised - Load capacity per upright: 2,700 kg plus roof, wind, and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm: 900 kg - Including roof supports (maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height-adjustable in 100 mm increments - Each upright has 3 bolted cantilever arms with 1,200 mm depth, with deflector = 4 storage levels stacked - Including longitudinal and diagonal bracing with 1,500 mm axis spacing - Rack length: 12,100 mm - Including fastening material (excluding floor anchors) - With installation manual and load capacity signs C4 according to DIN standard - Expert telephone support - Made in Germany - Short delivery times - Collection on-site possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable deliveries with pre-arranged notification. The material is sensibly packaged for easy unloading. The foundation must be concrete, level, and suitable for dowel anchoring and must be able to absorb the effective loads. Floor conditions, load-bearing capacity, and any necessary official permits must be checked and ensured by the customer. The uprights must be anchored to the floor on site; wall anchoring is not necessary and not recommended. According to professional association guidelines, it is recommended that the uprights provide at least 500 mm overhang above the top storage level.

Būklė: naudotas, Kėlimo stalas su ritininiu konvejeriu Ljdpfxsym Smho Akvehh BARTSCHER Keliamoji galia 1500 kg Kėlimo aukštis 1,80 m

Būklė: labai geros būklės (naudotas), KEMPER SP 150 A katilas, skirtas 150 kg miltų, su pavaros krumpliaračiu Lhodpfx Akeghwiysvsh

Būklė: nepatikrintas (naudotas), Volume: Approx. 6000 L Type: Vertical, standing on three legs Lhsdpfjhg Nk Djx Akveh Tank diameter: 2250 mm Heatable/coolable double jacket Enamelled tank

Būklė: nepatikrintas (naudotas), Volume: Approx. 6000 L Type: Vertical, standing on three legs Lodpfx Aohg Niqskvshh Tank diameter: 2250 mm Heatable/coolable double jacket Enamelled tank

Būklė: nepatikrintas (naudotas), Volume: Approx. 5000 L Lhodpfxohg Nlpe Akvoh Type: Vertical, standing on three legs Tank diameter: 2100 mm Heatable/coolable double jacket

Būklė: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, valdiklio modelis: DNC 80, automatizacijos lygis: vadovas, Jonescheit Hytap 30 su DNC 80 – patikima lankstymo staklės su patikrinta valdymo sistema Parduodama Jonescheit Hytap 30 su DNC 80 valdymu. Tai patikimos ir patikrintos lankstymo staklės, skirtos naudojimui dirbtuvėse ir gamyboje. Staklės puikiai tinka tiksliems lenkimo darbams ir pasižymi tvirta konstrukcija bei paprastu valdymu per DNC-80 valdymo pultą. Tai įdomus sprendimas įmonėms, ieškančioms veikiančių ir iš karto naudojimui paruoštų lankstymo staklių. Žinomi duomenys: Gamintojas / modelis: Jonescheit Hytap 30 Lhodeyxakyepfx Akvoh Valdymas: DNC 80 Pagaminimo metai: 1995 Versija: rankinė Būklė: naudota, visiškai veikianti Pastabos: Staklės parduodamos be įrankių. Galima apžiūra ir bandomasis paleidimas vietoje. Būklė: Naudota ir paruošta darbui. Išvada: Patikimos lankstymo staklės vartotojams, ieškantiems patikrintos įrangos su DNC valdymu. Puikiai tinka apžiūrai ir veikimo patikrinimui vietoje.

Būklė: geras (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, CNC apdirbimo centras • Homag BOF 321, pagaminimo metai 1998 pritaikytas laiptų ir kitų komponentų gamybai. • Homag PC83 valdymo sistema • Darbo sritis X = 5200 mm • Darbo sritis Y = 1300 mm • Darbo sritis Z = 410 mm • Frezavimo galvučių skaičius: 2 • Frezavimo varikliai: 12 kW • Maksimalus apsisukimų skaičius: 24 000 aps./min • Sukamoji svirtis: Taip • 4 ašių staklės • Įrankių tvirtinimo sistema: HSK-F63 Lhjdpfx Aox S Ewrskvjh • Du įrankių žurnalai: po 12 įrankių kiekviename • Dviguba darbo zona • Valdymo konsolių skaičius: 10 • Vakuuminiai siurbliai: 2 • Vakuuminio siurblio galia: 100 m³/val. • Apsaugos įranga: slėginis kilimėlis • CE ženklinimas: Taip

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, veikimo valandos: 1 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: N2104796, GEM F470 AUTOMATIC CARTON SEALER WITH AUTOMATIC FLAP CLOSING FOR CONSISTENT CARTON SIZES incl. centering unit and Siemens S7 PLC control CARTON DIMENSIONS: - Length: min. 150 mm – max. 600 mm - Width: min. 100 mm – max. 520 mm - Height: min. 100 mm – max. 670 mm TECHNICAL DATA: - Siemens S7-1200 PLC control - RCC500 infeed centering unit - Vertical drive and guide belts - Carton size adjustment manual - Top and bottom sealing unit - Standard versions T22 / T23 - Tape width from 50 to 50 mm, depending on unit - Adjustable tension - Max. tape reel diameter: 360 mm - Tape reel core: 76 mm - Mains voltage: 400V, 3-phase, N, PE – 50/60 Hz - Power consumption: 0.25 kW - Protection class: IP54 - Operating environment: +5°C to max. +35°C - Conveyor speed: 22 m/min - Average output: 1200 cartons/hour - Working height: 650 mm - Weight: 293 kg Lhodpfx Akoykugxevsh - Machine dimensions (L x W x H): 2,470 x 990 x 1,782 mm - CE safety features: lateral sheet metal guards with access door, plus infeed doors L 850 mm, top and bottom cover Image may show optional extras subject to surcharge

Gamybos metai: 2026, veikimo valandos: 1 h, būklė: beveik kaip naujas (parodų įrenginys), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: S23NEOS06, Demonstration unit: ATLANTA NEOS stretch wrapper ARYA system for automatic film blowing and cutting. 99 individually storable programs Includes 1 remote control – additional units available as an option Wrapping height: 2150 mm Mast height: 2050 mm (fits through almost any doorway) Lhedpfsyktv Sjx Akvjh Film power stretch 120-400% Motorized pre-stretch system with stepless adjustment Pre-stretch ratio adjustable via control panel from 120 to 400% Film tension electronically controlled via control unit Quick-change system (IEF) for easy film roll replacement Film specifications: Max. external diameter Ø300 mm – height = 500 mm – core Ø76mm Automatic film cutting unit Film tension can be saved in 4 steps TECHNICAL DETAILS: Two maintenance-free 12 V – 100 Ah AGM batteries connected in series At least 160 pallets per charge – charging time: 8–10 hours High-frequency battery charger with LED display Wrapping height “machine with mast” (pallet included) 2,150 mm Height detection by photoelectric sensor or by entering dimensions on display Protective bar for emergency stop Emergency stop switch according to CE regulations Acoustic warning signal and warning light during machine start-up Anti-drop safety device for film carriage Push-buttons for start & stop Machine operation according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS VIA CONTROL PANEL: All functional parameters adjustable via display - Display lock for program change - Adjustable machine rotation speed around the pallet up to 80 m/min - Carriage ascent and descent speed independently adjustable • Carriage ascent speed: 1.3 to 5.4 m/min • Carriage descent speed: 1.3 to 5.4 m/min - Number of wraps at pallet base (1–10 wraps) - Number of wraps at pallet top (1–10 wraps) - Setting the pallet wrapping height - Film tension for bottom/top wraps and carriage ascent/descent independently adjustable - Film pre-stretch for bottom/top wraps and carriage ascent/descent independently adjustable - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS VIA CONTROL PANEL: 99 storable wrapping programs for SFERA EASY - Cross wrap (upward/downward) - Simple wrap (upward or downward only) - Wrapping cycles with predefined start and stop heights - Wrapping to a preset height (ignoring the photoelectric sensor) - Wrapping cycle for large pallet dimensions - Wrapping cycle for top sheet application - Soft-start cycle for edge protection installation - Wrapping cycle with reinforcement and adjustable number of wraps Soft-start to prevent film tearing on sharp pallet edges Wrapping cycle with manual or motorized rope forming (optional) Additional units are immediately available from our Ludwigsburg stock. #Atlanta #Neos #Arya #Sfera #MobileWrapping #StretchWrapper

Būklė: paruoštas naudoti (naudotas), * Prekės ženklas: dbr Fördertechnik Lodpsywmw Refx Akvjhh * Tipas: Horizontali elipsė * Paviršius: 5000 x 1600 mm – 2,5 aukšto * Pavara: 18,5 kW elektros variklis.

Būklė: paruoštas naudoti (naudotas), * Prekės ženklas: dbr Fördertechnik * Tipas: Horizontali elipsė Lodpfx Akeywmw Djvshh * Darbinis paviršius: 6000 x 1800 mm – 2 pakopos * Pavara: 18,5 kW elektros variklis.

Būklė: geras (naudotas), 1 vnt. Arburg 320C 500-170 su Multilift, apsauginė tvora ir iškrovimo konvejeriu. Parduodama be Z konvejerio, temperatūros reguliatorių ir Koch vakuuminių siurblių. Mašina būtų greitai prieinama pagal susitarimą. Lhodpjyym Saofx Akvsh

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2017, S&F Vibrating Screen Machine | Screen Machine Type ASM-200 used (inspected) with tested bearings (flange bearings) and inspected universal joints Manufacturer: S&F GmbH Type: ASM-200 Year of manufacture: 2017 Screening capacity: approx. 20 t/h (with wood pellets, depending on material) Lsdey Aa Ugopfx Akvjhh Fractions: 2 Screen area: 2.0 m² per mesh size Number of screen decks: 1 Screen mesh specification: - 1st screen deck: perforated plate screen, punched, D = 5 mm Drive power: 2.2 kW, 3 x 400 V, 50 Hz Dimensions (L x W x H): 3,200 x 1,800 x 1,450 mm Version: ECO Line Machine weight: approx. 1,300 kg Machine color: RAL 3000 Flame Red includes Modular Silo Type M-300 / 45°, used L x W = 3,000 x 3,000 mm Total height: approx. 4,400 mm Discharge height: approx. 1,750 mm Volume: approx. 4.06 or 9.35 m³ Max. bulk density: approx. 900 kg/m³ Item no.: 406.4345 including extension legs L = 1,100 mm including hopper extension and slide gate Suitable for screening the following bulk materials, among others: - Wood chips - Sawdust and wood shavings - Biomass - Wood pellets - Charcoal - Waste wood - Bark Vibrating screen | Wood chip screen | Vibrating screening machine | Flat-deck screen | Vibratory screen | Roller separator | Screen for wood chips | Screening machine for CHP plants

Būklė: naudotas, Electric motor, three-phase motor - Power: 0.35/0.5 kW - Speed: 660/1325 rpm - Shaft: Ø 24 x 50 mm - Design: B5 - Protection class: IP 54 Lhedpfx Akod Sx Ngoveh - Dimensions: 330/199/H230 mm - Weight: 10.3 kg

Būklė: naudotas, Konvejeris, juostinis konvejeris, MFP Fördertechnik juostos konvejeris Pagaminimo metai: apie 2015 Naudojamas ilgis: 2500 mm Juostos plotis: 250 mm Juostos ilgis: apie 5200 mm Rėmo profilio aukštis: 50 mm Grįžtamojo veleno skersmuo: 20 mm Juostos greitis: apie 5 m/min. iki 40 m/min. Konvejerio aukštis: apie 1000 mm Variklio galia: 140 W Tinklo įtampa: 230 V, 50 Hz. - Nenutrūkstamas juostos greičio reguliavimas per potenciometrą ant ROFRE dažnio keitiklio, tipas 897 - Dešinė/kairė važiavimo kryptis Lhedpfjxf Uqlsx Akveh - Juostos pavara per INTERROLL vamzdinį variklį - Tvirta plieninė-ketinio konstrukcija su uždengta plieno plokšte po konvejerio juosta - 1 vnt. aukščio reguliuojamas HAACON rėmas su rankine svirtimi, konvejerio aukštis apie 1000–1200 mm - HAACON rėmas sumontuotas ant plieno plokštės ilgis 500 mm x plotis 450 mm x storis 20 mm - 1 vnt. fiksuota atraminė koja be aukščio reguliavimo, naudojama kaip transportavimo atrama - Visiškai mobilus ant fiksuotų ratukų Bendri matmenys I x P x A: 2570 x 400 x 1050 mm Svoris: 115 kg

Būklė: geras (naudotas), Keltuvas, atraminis keltuvas, atrama, butelinis keltuvas, mechaninis keltuvas, ašies keltuvas, aliumininis keltuvas, hidraulinis keltuvas -Gamintojas: Tangye, aliumininis keltuvas, hidraulinis keltuvas 6,5 t -Tipas: Hydramite plus -Kėlimo eiga: 76 mm Lhodpfx Asx Eifdokvoh -Velenas: Ø 30 mm -Kiekis: Yra 1 vnt. keltuvo -Matmenys: 240/100/H135 mm -Svoris: 3,9 kg/vnt.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1992, Prieinama FTH Fördertechnik maišų paletavimo linija. Grupė: po 5, paletavimo našumas: apie 1500 maišų/val., padėklų matmenys X/Y 1: 1200mm/800mm, padėklų matmenys X/Y 2: 1200mm/1000mm, sudėjimo raštas: keičiamas, bendri įrenginio matmenys X/Y: apie 12600mm/5700mm. Galima apžiūra vietoje. Lhodpexd Avasfx Akvjh

Būklė: geras (naudotas), Gamybos metai: 2018, Funkcionalumas: visiškai funkcionalus, Automatinė pakrovimo sistema dviejų „Walking-Floor“ tipo transporto priemonių užpildymui biriomis atliekomis/žaliavomis, susidedanti iš plieninės konstrukcijos su priežiūros platforma, 2 perkėlimo juostų ir reversinės juostos, bei esant poreikiui grandinės transporterio medžiagų padavimui iš apačios. Transportavimo našumas apie 200 m³/val. Lsdpfjylzm Uox Akvjhh

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, įėjimo įtampa: 380 V, įėjimo dažnis: 50 Hz, lazerio galia: 3 000 W, Vamzdžio ilgis (maks.): 6 000 mm, Įranga: CE žymėjimas, apsaugos šviesos užtvara, aušinimo blokas, avarinis stabdymas, centralizuota tepimo sistema, dokumentacija / vadovas, dulkių šalinimas, dūmų ištraukimas, purkštukų keitiklis, Didelis greitis · Didelis tikslumas · Didelis stabilumas Ši mašina turi aukštos precizikos įtempimo sistemą, specialiai sukurtą vamzdžių pjovimui. Dėl puikaus sandarumo ir apsaugos nuo dulkių ji užtikrina įtempimo tikslumą iki ≤0,1 mm – idealiai tinka aukšto tikslumo mažų vamzdžių apdirbimui. Griebtuvas sukasi iki 160 aps./min. ir pasiekia 1,5 G pagreitį. Tai leidžia itin efektyviai apdoroti mažo skersmens vamzdžius. Ledpfxjwwi H Ue Akvehh Palaikomas automatinis arba pusiau automatinis pakrovimas. Leidžia lengvai taikyti išmanųjį ir automatizuotą apdorojimą. Viena mašina pakeičia tris darbuotojus.

Būklė: naujas, The SAPI Mammut sandblasting units with QUICK STOP™ system are powerful industrial sandblasting machines used in various sectors such as automotive, construction, and manufacturing. These systems are engineered for fast and efficient surface preparation, cleaning, and treatment of metal, concrete, and other substrates. The SAPI QUICK STOP™ device is a safety feature designed to prevent accidents and damage to the unit. It operates by immediately stopping the blasting process as soon as the operator releases the control handle, instantly cutting off the abrasive flow. This safety system helps prevent workplace accidents and protects the machine from damage caused by overuse. Efficiency and Durability The QUICK STOP™ system reduces air and fuel consumption, resulting in a more efficient and cost-effective sandblasting process. The Mammut sandblasting machine is robustly constructed from high-quality components, ensuring reliable operation even in the harshest environments. All of our machines are fully CE- and TÜV-compliant. Flexibility and Versatility The machine is available in various tank sizes to accommodate different blasting requirements. A wide range of abrasive materials can be used, from regular sand to special plastic or metallic media. Our Mammut with QUICK STOP™ is suitable for numerous applications including surface preparation, cleaning, and the removal of rust, paint, and coatings. Precision and User-Friendliness Our Mammut with QUICK STOP™ offers precise control and adjustment of the blasting pressure even during operation, delivering consistent results and high accuracy. Additionally, all of our units feature easily accessible inspection and maintenance openings. Safety The QUICK STOP™ system with a deadman control handle ensures maximum safety during blasting operations. QUICK STOP™ also prevents moisture buildup inside the machine by maintaining constant pressure, even when blasting is stopped – a clear advantage over standard on/off systems. Lhedpfxjupyw Es Akveh All Mammut sandblasting units with QUICK STOP™ come fully equipped as standard. Our packages typically include a blasting hose, nozzle, pressure regulator, moisture separator, abrasive metering valve, and basic personal protective equipment.

Gamybos metai: 1992, būklė: nepatikrintas (naudotas), Bagging machine and double net clipper, manufacturer Strapack, suitable for apples and potatoes, from 1-5 kg. The machine is in very good condition and was only in use for about 10 years. Equipped with 4 carriages, the capacity is approximately 15–20 bags of 2 kg per minute. The machine is fully operational and comes with all accessories. The machine has been overhauled; price on request. I also sell spare parts for EW20, EW10, and Net Clipper UC20. If interested, please contact: Lhsdpohh Idrsfx Akvjh

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Technical details: SEW motor Type: DV132H8/4BH/HF/TH rpm: 700/1450 IP:54 Frequency: 50 Hz 400V AC Lhodpfxjwu Dbbo Akvoh Brake: 400V Weight: 83.94 kg The SEW motor with rotary table is a powerful and versatile drive solution, ideally suited for precise positioning and automation tasks. The motor features a robust design and reliable operation, ensuring stable and efficient performance. The integrated rotary table allows for flexible and precise control of motion sequences, making it particularly suitable for manufacturing and assembly applications.

Būklė: naudotas, 7 Spannzangen-Größen: Lhsdpebn Rpiofx Akvjh 7-9-10-12-16-18-20 mm