Įvorės griebtuvai

mit 7 Spannzangen SK 50

Sąlyga: geras (naudotas), Gabbiani SA 300 Multi-Blade Saw – Italian production TECHNICAL SPECIFICATIONS: cutting width: 300 mm motor power: 40 kW cutting height: 100 mm feed speed steplessly adjustable feed speed range: 8–56 m/min blade diameter: 300 mm spindle diameter: 50 mm bushing diameter: 70 mm 3 top pressure rollers minimum material length: 700 mm table dimensions: 1750 x 700 mm three rows of pawls height from base: 740 mm extraction outlet diameter: 2 x 150 mm overall dimensions (L/W/H): 270 / 170 / 160 cm Isdpfehcwrksx Af Ioal

Gamybos metai: 2013, Sąlyga: naujas, Various Thread Rolling Tools Manufacturer: Fette See list below. All tools are new! M12-14x1.5 2/57 1K 1509925 1 M12-14x1.75 2/53 1K 1509970 2 7/16-20 UNF T18-63-21.5 1538172 7 M20x1.5 T18-226-14A 1539858 8 M16x1.5 T18-33-21.5 1537459 6 M20x1 T18-158-21.5 1555189 6 11/16-14 UNS T27-687-31 2178650 6 M8-10x1.25 2/518 0.6K 1509550 2 M8-10x1 2/05 2K 509541 2 M8-10x1.5 2/772 0.3K 1 M8x1.25 T18-0.3-21.5 1536370 15 3/4-16 UNF T27-88-22A 2182703 2 M22x1.5 T27-39-14A 1544067 1 1/2x20 UNF T27-909-10A 2406829 3 3/4/16 UNF T18-67-16A 1538332 4 M12x1.5 T18-30-21.5 1536959 4 7/8-14 UNF T27-89-20A 3 M12x1.25 ISO T27vB 31mm 291 5 M8x1.25 T18-03-08A 2175185 7 M8x1.25 T18-03-10A 1536316 1 M8x1 T18-17-21.5 1539787 1 11/16-14 UNS T27-687-31 2178979 1 M25x1.5 T27-41-22A 2 M16-18x1 34/363 3K 1517783 4 M24x1 LH T27-29L-31 2179796 3 M24x1 ISO T27 31mm 3 M20x0.5 T18-228-16A 2177355 1 M12x1.25 T18-28-21.5 1536888 2 3/8-24 UNF T18-62-21.5 1538154 2 3/4-16 UNF T18-67-16A 1538332 2 10-32 UNF T18-286-12A 1538056 1 M12x1.5 T18-30-21.5 1536959 1 M18x0.75 T18-186-08A 1537547 3 M8x1 1223/05 1K 1508533 2 M11x0.75 T12-22-12A 2 M12x1 T12-27-15.5 531918 10 M7x0.75 T18-12-21.5 2179611 3 M7x1.0 1 M17.5x0.5 ISO T27vB 31mm 275 1 M16x1 T18-24-20A 1537379 1 M10-12x1.5 2/515 0.6K 1 M16x1 T18-24-21.5 1537388 2 M7x1.0 ISO T18 16mm FormA 5 1/2-20 UNF T27-85-16A 1545761 1 M12x1 T27 1 Iaedpfx Afjbv Tg Hs Isl M18x1.5 T18-35-21.5 1537627 3 13/16x16 2 1/8-28 GAS T18 21mm 80 4 M12x1.25 T18-28-18A 1536879 4 M20x1.5 T27-38-10A 1543914 4 M20x1.5 T27-38-31 1 M30x1 T27-287-24A 2 M6x1 T18-01-18A 1539769 4 M6x1 T18-01-16A 2174668 8 M6x1 T18-01-10A 1536129 2 M6x1 T18-01-21.5 1 1/2-20 UNF C16-180-A10 2406916 3 M20x1 T27-27-31 2174791 5 M20x1 T27-27-31 2179011 2 M16x1 T27-24-13A 1 M10x1 T27-19-12A 2 M18x1.5 T27-37-26A 1556124 2 M10x1 T27-19-28A 1 M20x1.5 T27-38-14A 1543932 3 M20x1.5 T27-38-16A 1543950 1 M12x1.5 T27-32-18A 1543308 3 M18x1 T27-26-14A 2 M12x1.25 T27 3 M16x1.5 T27-35-12A 1543674 4 M12x1.25 T27-191-20A 1543255 3 M16x1.5 T27 31mm 2 M16x1.5 T27 12mm 2 M5x0.8 T18-82-14A 1 M5x0.8 T18-82-21.5 1 M10x0.5 T18 10mm 6 M20x1 T27-27-10A 1 M28x1.5 T27-100-31 2174706 3 M38x1.5 T27 31mm 2 M24x1.5 T27 31mm 5 M12x1 T27 31mm 1 M20x1.5 T27-38-31 1544021 2 M13x1 T27-250-20A 1 M12x1 2 M36x1.5 T27 31mm 3 M10x1 T27-19-28A 1543095 2 M10x1 T27-19-28A 1543102 1 ... If you would like a more formatted Excel-friendly table, please let me know.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2010, Control: Siemens Sinumerik 840D Working area Swing diameter over bed: 820 mm Swing diameter over cross-slide: 520 mm Cross-slide travel: 600 mm Toolholder: Front: Capto size C6 – Multifix D1 Rear: Drilling rest with clamping claw Centre distance: 3000 mm Main spindle drive Power, digital AC motor – 60% duty cycle: 46 kW Number of gear stages: 2 (ZF planetary gearbox, electrically actuated, mounted outside the headstock) Headstock Spindle nose DIN 55027 / Bore (standard): 11 / Ø 132 mm Spindle diameter at front bearing: 190 mm Speed range (constant V): 1 – 1,800 rpm Standard chuck sizes: Ø 315, Ø 400, Ø 500 mm Spindle nose DIN 55026 / Bore (option): A 11 / Ø 164 mm Spindle diameter at front bearing: 210 mm Speed range (constant V): 1–1,600 rpm Cross-slide Feed range, cross: 0.001 – 1,000 mm/min Feed range, longitudinal: 0.001 – 2,000 mm/min Thread pitches: 0.01–999.999 mm Rapid traverse, cross/longitudinal: 5/10 m/min With centre distance: 4,000 mm Feed force, cross: 16,000 N Feed force, longitudinal: 22,000 N Turning tool section: 40 x 40 mm² Tailstock Quill diameter: 125 mm Quill stroke: 280 mm Taper: 6 Mk Electrical equipment Isdpfjxgdfbex Af Ioal Three-phase current: 400 V, 50 Hz Design according to VDE and EMC guidelines EN 50081-2 / EN 50082-2 Interference suppression level A according to EN 50081-2 For TN-S or TN-C power networks/industrial networks without RCD protection Dimensions Machine (L × W × H): 2.88 m + centre distance × 2.55 m × 2.32 m Machine weight (Centre distance / approx. weight in kg) 3,000 mm: 10,900 kg

Sąlyga: geras (naudotas), 16 external turning tool holders Iaodpfoikn E Hjx Af Ijl 41 internal turning tool holders

Gamybos metai: 1997, Sąlyga: labai geros būklės (naudotas), A used, very well-maintained cold circular saw from EISELE, equipped with a 370 mm circular saw blade, infinitely adjustable hydro-pneumatic feed, pneumatic material clamping, coolant system, and documentation. Speed: 17/34 rpm Cutting capacity: - Round 90°/45° right, left / 30° right: 130/130/105 mm - Square 90°/45° right, left / 30° right: 120x120/100x100/90x90 mm - Rectangular 90°/45° right, left / 30° right: 200x100/140x100/100x100 mm Pneumatic connection: 7 bar Working height: 900 mm Machine dimensions (W x D x H): 865 x 1332 x 2175 mm Iedpfx Afskfp D Tj Ijal Weight: 460 kg For further technical details, please refer to the PDF document. Technical data and dimensions: subject to errors and change without notice.

Sąlyga: geras (naudotas), Gamybos metai: 1988, Weiler lathe Model Condor B 2-axis digital readout Centre height: 165 mm Centre distance: 750 mm Swing over bed: 330 mm Swing over cross slide: 185 mm Spindle bore: 40 mm Connected load: 3 kW Speed range: 22–2800 rpm Tailstock: Morse taper 3 Coolant pump (not connected) Work lamp Automatic longitudinal and cross feed Spindle brake - Hinged chuck guard Ijdpfx Afovgmbvj Isal - Splash guard Weight approx. 1040 kg 3-jaw chuck Multifix B quick-change toolpost Live centre

Sąlyga: naudotas, Gamybos metai: 2002, Swing diameter: 820 mm Turning length: 2,000 mm Isdpfx Afsw Dvipe Ieal Control: SIN 810 D Centre height above flat bed: 400 mm Swing diameter over cross-slide: 500 mm X-axis travel: 540 mm Z-axis travel: 2,100 mm Feed rate X/Z axis: 0.01 - 50 mm/min Rapid traverse X-axis: 5.00 m/min Rapid traverse Z-axis: 10.00 m/min Feed force, facing: 12,500 N Feed force, longitudinal: 20,000 N Spindle speeds: 6.4 - 1,600 rpm Spindle speed, gear stage 1: 6.40 - 376 rpm Spindle speed, gear stage 2: 27.40 - 1,600 rpm Drive power at 60% / 100% duty cycle: 46.00 / 37.00 kW Torque at 60% / 100% duty cycle: 5,073 / 4,069 Nm Constant cutting speed: 1 - 9,999 m/min Spindle nose DIN 55027 – size 11 Spindle diameter at front bearing: 170 mm Spindle bore: 128 mm Tailstock quill taper: MK 6 Quill diameter: 125 mm Quill stroke: 280 mm Thread pitch: 0.1 - 400 mm Total power requirement: 35.00 kW Machine weight approx.: 11.00 t Space requirements approx.: 6.00 x 3.00 x H2.60 m Control: SIEMENS Sinumerik 810D, chip conveyor, tailstock, extraction unit, 2 pcs. steady rests. Spindle bearing serviced by OEM in 04.2023 Machine can be inspected under power.

Sąlyga: naudotas, Gamybos metai: 2006, Techninė informacija: Iedpfxswmcx Ae Af Isal Sukimosi skersmuo: 490 mm Sukimosi ilgis: 2000 mm Bendras galios poreikis: 15/20 kW Staklių svoris apie: 3,6 t Užimamas plotas apie: 2,8 x 1,85 x 1,9 m Beveik naujos būklės · Heidenhain ciklinis valdymas · Atsparus deformacijoms staklių rėmas, pagamintas iš aukštos kokybės ketaus su sukietintomis ir tiksliai nušlifuotomis kreipiančiomis bei stikline liniuote X ašyje · Saugos sankaba Z ir X ašyse · Dulkių oro užraktas su anglies filtru tiesioginio matavimo sistemoje · Didelis tikslumas ir standumas sukimo ašyje dėka preciziškų guolių; veržliaraktinė anga Ø 93 mm standartiškai, galima iki Ø 130 mm kaip opcija · Tvirtas gręžimo centratorius, griebtuvo Ø 90 mm su MK5 vidaus kūgiu · Didelė atsišakojimo zona virš skersinio stalo patogiam velenų apdirbimui Detalių ilgis: 2 m be centro, 1,70 m su centru. Seiger tekinimo staklės turi Teach-in CNC programas. Valdymas: MC420. Įrankių laikiklis: SAUTER.

Sąlyga: naujas, Gamybos metai: 2024, Kudu drilling and milling center with CNC control and tool changer (3-axis) Drilling and milling center with movable machining unit – the worktable remains stationary while the drill head moves. The drilling center enables both manual and fully automatic operation. After each drilling process, the machining unit automatically moves in the X and Y axes to the next drilling position. Operation is designed to be extremely user-friendly. Data can be transferred to the machine control using DXF/DWG file formats via a programming station. Alternatively, the system can also be programmed directly on the machine control panel. The system is extremely robust and constructed using proven machine components. Technical data: • Measuring length: 6,000 mm • Overall length: 8,050 mm • Sturdy machine base • Drill head speed: up to 2,500 rpm (standard version), delivered with the appropriate speed for your application • Tool holder: SK 40 • X, Y, and Z axis driven by servo motors • Rapid traverse (X-axis): 20 m/min • Rapid traverse (Y-axis): 5 m/min • Distance table top to lower edge of tool holder: 400 mm • Table width: 480 mm • Working height: 1,050 mm • Drilling diameter: 3 to 30 mm in mild steel (tool dependent) • Tapping: M4 – M30 (with floating chuck) • Y-axis travel: 300 mm • X-axis tolerance: ±0.1 mm • Y-axis tolerance: 0.06 mm • Z-axis tolerance: 0.06 mm • Main spindle drive motor: 5.5 kW • Machine weight: 2,300 kg • Machine dimensions: 8,050 mm x 3,000 mm x 2,388 mm (see layout plan) • Power connection: 32 A • Air supply: 8 bar • Front safety via light curtain • Rear access protection via machine fence • Control: 21.5" touchscreen panel, reinforced front glass • Simple programming at the machine • Capable of milling slots and circles • Lubrication via minimum quantity spray system • Without material clamps • Remote maintenance possible via TeamViewer (LAN interface) • Tool magazine for drilling tools, including dimensions and speeds • Simulation of work sequences • Digital handwheel Your advantages: • Protects workpiece surfaces • Clear, graphical user interface • Machining directly at the workpiece end is straightforward • 50% space saving compared to moving-table designs Iaodpsfu Ivzofx Af Ijl • Chips are collected in a chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are eliminated by CAD/CAM integration You are welcome to visit and inspect the desired machine at our manufacturing/showroom at any time. Please feel free to contact us. Plantec Maschinen GmbH

Sąlyga: naudotas, Diameter various. Quantity 56x. Holder BT 40. Iajdpfjwtrzyox Af Ijl