Rentgeno Kontrolės Sistema pirkti naudotą (18 677)

Būklė: naudotas, Gamybos metai: 2002, Technical details: Rated power: 1670 kVA Rated power: 1500 kW Voltage: 400 V / 50 Hz Operating hours: 800 h This UPS system is ideally suited for uninterrupted operation under demanding environmental conditions, as often encountered in industrial applications. Suitable for stabilising, among other things, power supply systems. The UPS unit consists of the Powerbridge (a flywheel with an attached generator) and a Uniblock (electromotor/generator unit). Gujdpfx Asu Nzwujp Isc The Uniblock supplies power to the customer modules in the absence of any mains fault. The Powerbridge serves as an energy storage device. In the event of a mains failure, the Powerbridge temporarily takes over the power supply (at full load, the supply is maintained for 39 seconds). Energy storage type PB60+ with a bridging time of 39 sec. A diesel engine is coupled via a freewheel clutch. This means that as soon as the engine reaches the speed of the Uniblock, it accelerates the generator to synchronous speed and thus takes over the power supply. (At the same time, the Powerbridge is recharged)

Gamybos metai: 1998, būklė: naudotas, Technical details: Godpfx Asu N Ad Nep Isuc Total power requirement: 1.1 kW Airflow rate: 900 m³/h Filter surface area: 6.0 m² Filter: 1 unit Approx. machine weight: 125 kg Dimensions (L x W x H): 0.74 x 0.62 x 1.8 m Areas of application: Extraction of grinding dust; with alternative filter inserts, also suitable for welding fume extraction - mobile unit on casters - with coarse particle collection bin - cleaning interval adjustable up to 60 sec. - pulse cleaning, automatically activated after the unit is switched off - filter separator Further technical specifications: - Separation area: 6.0 m² - Separation efficiency: over 99% - Cleaned air remains in the workspace - Cartridge filter inside the unit: Ø 400 mm, length 270 mm - Filter replacement by hand (service door)

Būklė: naudotas, Gamybos metai: 1991, Technical Details: Operating pressure: 160 bar Column gap: 2000 mm Throat depth: 1000 mm Operating pressure (pneumatic): min/max 6/8 bar Operating pressure (hydraulic): min/max 160/210 bar Operating voltage: 380/50 V / Hz Table surface: 1900x1000 mm Table height above floor: 1000 mm Clamping area for tooling: 1600x350 mm Oil capacity: 400 l Total power requirement: 25.0 kW Machine weight approx.: 7.1 t Electrical cabinet dimensions (LxWxH): 1.0x0.3x1.4 m Machine dimensions approx. (LxWxH): approx. L:2.2xW:3.4xH:2.2 m HYDRAULIC FLAP PUNCHING DEVICE or CUTTING PRESS or FLAP PRESS The machine is equipped with the tooling "Table punching device for raw part carriers". Two machines available for sale! Guodpfx Aeu Icxdop Iec The machine was used for punching holes in automotive dashboards (top and bottom die). The product holder and the sliding units for trimming and hole punching are mounted on the table. Features: - Light curtain - Hydraulic power unit - Control cabinet - Operator panel - Piece counter - Manual and automatic mode possible - Emergency stop Sale as-is! I.D.. *

Būklė: naudotas, Detalii tehnice: Curent de sudare: 330A / 50% și 210A / 100% Grad de protecție: IP 23 Consum total de putere: 13,8 kVA Greutate utilaj aprox.: 71 kg Dimensiuni utilaj: 0,95 x 0,60 x 0,90 m - MIG / MAG / MIG și electrod - Sistem de răcire cu apă AF - Clasa de izolație B - Domeniu de putere 3A / 20V până la 330A / 34V Control prin interfață robotică Gedpju Nxv Iefx Ap Iouc

Gamybos metai: 1998, būklė: naudotas, Technical Details: Temperature: 200-210 °C Conveyor speed: 1000 mm/min Max. workpiece length: 200 mm Total power requirement: 50 kW Machine weight approx.: 2.0 t Convection Reflow Soldering System for Printed Circuit Boards Soldering system for printed circuit boards (e.g. SMD type and/or mixed assembly) and for curing SMD adhesives Soldering system operates with the following stages --> Infeed - Preheat - Soldering - Cooling - Outfeed. - with software functions - can be integrated into a production line Gjdpfxju Rnd Do Ap Iouc Additional technical specifications: - Protective gas with nitrogen 30 m³/h; 6 - 10 bar overpressure - Water requirement: 20 litres/min; 2 - 5 bar overpressure - Exhaust air volume: 1000 m³/h - Electrical operating power: 12 kW - Space requirements: L: 6500 + loading station 2000 x W: 1400 x H: 2100 mm Additional equipment included: - Automatic stacking device LSB 03 with loading head and outfeed conveyor for e.g. PCB handling. - Machine is CE98 certified Suitable as a source of spare parts or for conversion/expansion. Sold as is. Priced for quick sale.

Būklė: naudotas, Technical Details: Welding current: 500 A Machine weight approx.: 129 kg Dimensions (L x W x H): 1.1 x 0.7 x 1.2 m Control: Display for welding current with 2-step/4-step switching, pulse function, stepless adjustment Cooling system: Water-cooled with antifreeze protection Shielding gas: Solenoid valve without pressure regulator Hose package: 3.0 m length Torch head: Gas-cooled Gedpfx Apowtctme Ijuc Ground clamp with 2.5 m ground cable Wire feeder: 4-roller drive for wire Ø 1.0/1.2 mm

Būklė: naudotas, Gamybos metai: 1999, Techniniai duomenys: Praėjimo aukštis: 2000 mm Talpyklos tūris: 800 l Ciklo trukmė: - sek. Šildymo galia: 45 kW Elektrinė specifikacija – Įtampa/Dažnis: 400/50 V/Hz Gedpsymc Txefx Ap Ieuc Keliamoji galia: 2000 kg Temperatūros diapazonas: maks. 65 °C Bendras energijos poreikis: 63 kW Atidarymo plotis: 2000 mm Užimamas plotas, apytikriai: 3.800 m

Būklė: naudotas, Technical details: Gsdpfx Aevz Abhop Ieuc Welding current: 500 A Approximate machine weight: 128 kg Dimensions (L x W x H): 1.2 x 0.8 x 1.2 m Control: Display for welding current with 2-/4-stroke switch, pulse function, stepless adjustment Cooling system: Water-cooled with antifreeze protection Shielding gas: Solenoid valve without pressure regulator Torch package: 4.0 m length Torch head: gas-cooled Ground clamp with 4.7 m ground cable Wire feed: 4-roller drive with wire diameter for 1.0/1.2 mm

Būklė: naudotas, Technical details: Power consumption: 240 A Voltage: 3x400 V Open-circuit voltage: 91 V Apparent power: 9.3 kVA Approx. machine weight: 28 kg Machine dimensions: 1.0 x 0.6 x 1.0 m Welding rectifier (inverter) TIG (steel/stainless steel) and manual arc welding Direct current TIG = up to 240 A / 19.6 V Gujdju U Iixjpfx Ap Isc MMA welding = up to 240 A / 19.6 V Switchable between 2-stroke/4-stroke, infinitely adjustable pulse operation Protection class IP 23 Water-cooled with antifreeze protection Shielding gas / solenoid valve Torch head gas-cooled with remote control for welding current Equipment: Hose package 7.4 meters Earth clamp and earth cable 4.2 meters

Būklė: naudotas, Gamybos metai: 2007, Technical details: Airflow rate: 1100 m³/h Filter: 1 unit Filter area: 350 x 400 mm Filter type: mechanical Approx. machine weight: 100 kg Dimensions (L x W x H): approx. 0.5 x 0.6 x 1.4 m Oil mist separator – Dry separator with fan - Suction nozzle Ø 195 x 70 mm - Exhaust outlet (W x H): 440 x 150 mm - Fan: 380 V Godpfx Apovvk Ifj Ijuc External control

Būklė: naudotas, Gamybos metai: 2017, Technical details: Operating pressure: 12 bar Tank capacity: 200 l Total weight approx.: 220 kg Dimensions (L x W x H): 1.2 x 1.1 x 1.8 m Mobile pressure blasting vessel – sandblasting unit Blasting vessel pressure up to 12 bar Test pressure 17.2 bar Fully equipped with: - Remote control valve - Remote control lever - Electro-pneumatic remote control - Carbide spray nozzle including 10 m nozzle hose Godpfx Aevvvrpep Ijuc inner diameter

Būklė: naudotas, Technical Details: Guodpeu Nu I Tofx Ap Ioc Material diameter (min - max): Ø 20-30 mm Material length: approx. 70 mm Number of turbines: 3 pcs. Blasting hours: approx. 200 Space requirements approx.: total height approx. 4.5 m Connection rating: approx. 40 kW CONTINUOUS SPRING SHOT BLASTING MACHINE (SPRING HARDENING) Applications: For shot blasting/hardening of springs in a continuous process. The springs are conveyed through the blasting machine by a drag chain, which is exposed to the blast stream. The conveyor speed of the drag chain is adjustable. Very little used, approx. 200 operating hours. The system comprises: - Machine housing, interior (hardened high-alloy tool steel) with interchangeable blast plates - Conveyor system - 2 shot chamber maintenance doors - Bucket elevator - Blast chamber length/depth: approx. 2000 mm / approx. 670 mm - Blasting media: steel shot Ø 0.3 - 0.8 mm - Workpiece dimensions: springs Ø 20 - 30 mm x L: 70 mm - Drag chain drive power 1.1 kW - Max. conveyor speed: 15 RPM - Initial blasting media load approx. 500 kg (per machine) - Connected load approx. 40 kW Condition: - Without turbine blades (can be retrofitted at extra cost) ai.

Gamybos metai: 2003, būklė: naudotas, Techninės detalės: Nominali galia: 175 kVA Tūrio srautas: 100 m³/h Sukimosi greitis: 1500 aps./min. Prisijungimo įtampa: 400 V Matmenys (I x P x A): Konteineris: 3,0 x 2,6 x 2,6 m Guedpeu Nvb Ijfx Ap Ioc Dujų valymo įrenginys su 10 pėdų konteineriu Naudojimas: Nuotekų dujų, turinčių organinių silicio junginių ir vandenilio sulfido, valymui. Dujų slėgio didinimo įrenginys, gamintojas Muche GmbH Komplektacija: Aktyvintos anglies filtras Aušinimas Danfoss; oro sąnaudos - 2.800 m³/h; šaltnešis R 134a Šilumokaitis Renzmann&Grünwald Kondensatorius ID Kompresorius MTZ22-4VI Valdymo skydas Parduodama kaip aprašyta.

Gamybos metai: 2005, būklė: naudotas, Technical details: Load capacity: 5 t Trolley travel speed: 20.0/5.0 m/min Lifting height: 45 m Track gauge center-to-center: 2000 mm Lifting speed: 10.0 / 1.7 m/min Voltage: 230 / 50 V / Hz Total power requirement: 16 kW Double-rail trolley – electric wire rope hoist - Trolley travel speed: 20.0/5.0 m/min - Rope diameter: 8 mm; rope length approx. 2x48 m on a double-sided rope drum - Classification: 2m, load hook 180 mm - Travel drive on both sides with motor - Internal wheel spacing of the chassis = 1890 mm - FEM classification: 2m - Without control panel Gujdpfxju Nvf Hs Ap Isc Sold as is, as offered. i.D.

Būklė: naudotas, Technical details: Welding current steplessly adjustable: 320 A Protection class: IP21 Total power requirement: 17 kVA Machine weight approx.: 132 kg Machine dimensions: 1.3 x 0.6 x 0.9 m TIG with 2-stroke; 4-stroke; spot welding and pulse welding Switchable from 2-stroke to 4-stroke Cooling type: AF Gsdpfju Nwaxjx Ap Iouc New components such as: - 4.0 meter torch package, water-cooled - Ground clamp and ground cable 4.0 meters - Pressure regulator

Būklė: naudotas, Technical Details: Gjdju Nwbijpfx Ap Isuc Welding current, stepless: 400 A Degree of protection: IP21 Total connected load: 23.2 kVA Machine weight approx.: 128 kg Machine dimensions: 1.3 x 0.5 x 0.9 m - TIG - MMA welding and TIG - DC welding current - Cooling type: AF - Control with 2/4-stroke mode switching, spot welding, stepless The following components have been replaced with NEW ones: - 4.0 meter welding torch - Ground clamp and ground cable 4.0 meters - Pressure regulator

Būklė: naudotas, Technical details: Power consumption: 20 - 300 A Welding current: U1 = 380 V Connected load: 14 kVA Machine weight approx.: 171 kg Guedpfsu Nwgrsx Ap Ioc Machine dimensions: 0.9 x 0.5 x 0.92 m Transformer – Welding machine – Welding transformer – Welding rectifier, portable Welding process: Manual metal arc welding (MMA) Control: 14 steps for thin sheet and 14 steps for thick sheet Air-cooled Protection class IP 21 Direct current (DC) With electrode holder and cable approx. 6.0 meters Ground clamp and ground cable approx. 4.0 meters

Būklė: naudotas, Technical details: Suction nozzle diameter: 150x80 mm Connection: 380-420 V Total power requirement: 0.35 kW Dimensions (LxWxH): 950x500x680 mm Dust filter unit with fan Fan: Size Ø = 500x300 mm; exhaust air outlet Ø = 160 mm Filters: - 2 pieces, size 300x120x500 mm, filter compartment size W:300xD:260xH:520 mm - Suction nozzle diameter 150x80 mm. Guodpfx Aju Nwvtop Ijc

Būklė: naudotas, Technical Details: Gsdju N Afyjpfx Ap Iouc Voltage: 360-730 / 50 V / Hz Approximate machine weight: 0.150 t

Būklė: naudotas, Technical specifications: Length: 1120 mm Height: 1480 mm Power consumption: 500 A Output at 100% duty cycle: 390 A Power output: 23 kVA Welding current: 390 V Machine weight approx.: 234 kg Machine dimensions: 1.12 x 0.58 x 1.48 m Power output: 23 kVA Includes: Hose package with welding torch Gusdpfx Apowqpl Dj Ioc Ground cable

Būklė: naudotas, Gamybos metai: 2004, Technical details: Load capacity: 1.5 t Fork length: 1000 mm Usable height: 1290 mm Machine weight approx.: 150 kg Dimensions L x W x H: approx. 1.2 x 0.95 x 1.7 m This is a crane fork/loading fork with 2x handrails. Description: Gusdpfx Aevvrypep Isc 2x crane fork: - Variable fork width, adjustable up to max. 880 mm (6-position spacing grid per crane tine) Fork mount: - Height 1290 mm x width 900 mm - 6x Ø 20 mm grid per side Crane mount: - Height 1290 mm x width 900 mm - Angle setting 20° - Oval crane eye Ø 80 x 100 mm - Height adjustment (locking via Ø 22 mm spring bolt)

Būklė: naudotas, Gamybos metai: 2006, Technical details: Voltage: 380 V Number of stations: 1 unit Total power requirement: approx. 2.0 kW Machine weight approx.: 160 kg Machine dimensions: 0.85 x 0.85 x 1.0 m Vibratory bowl feeder Washing module (vibratory conveyor technology) with heating - Suitable for cleaning small parts. - Drum size: diameter 300 mm, height 150 mm - Discharge: automatic via auger guide - Tank: 560 x 460 x 280 mm, capacity approx. 60 litres; with fill level indicator - Features: rotating dirt separator Gjdsu Nu Imjpfx Ap Ieuc - Table: 800 x 600 mm; table height 640 mm; drip tray 750 x 550 mm - Guide rail width approx. 25 mm

Būklė: naudotas, Gamybos metai: 2005, Technical details: Lifting capacity: 75 t Track gauge (center-to-center): 2400 mm Overall width: 2570 mm Weight: approx. 7.3 t per hoist unit 4 traversing trolleys/winch hoists, each with 75 t capacity, walkable External control No. 2: TAG No. 10-MX0214 (with 3 walkways and handrail) Size: L: 4.5 x W: 2.3 x H: 1.7 m No. 1: TAG No. 10-MX0215 (with 1 walkway and handrail) Size: L: 4.5 x W: 1.2 x H: 1.7 m No. 3: TAG No. 10-DV0324B (with 1 walkway and handrail) Size: L: 4.5 x W: 1.2 x H: 1.7 m No. 4: No TAG No. (without crane hook) The hoists are equipped with a hydraulic drive (EX version) Rope pulleys with 8 falls for 28 meters without load hook Load hook rope: 2x double rope Ø 22 mm, mounting pin Ø 90 mm, 1 hoist lacks a crane hook Running gear: Guodpfx Asu Nvhnop Ioc 2x dual-sided double wheels, Ø 280 x 80 mm, axle distance 350 mm, track width 2,400 mm, center spacing 1,100 mm 4x 2-pair support wheels Ø 233 x 58 mm, axle distance 3,500 mm

Būklė: naudotas, Technical details: Welding current: 330A / 50% duty cycle up to 210A / 100% duty cycle Protection rating: IP23 Total power requirement: 13.8 kVA Machine weight approx.: 71 kg Machine dimensions: 0.95 x 0.60 x 0.90 m - MIG / MAG Godpfx Apeu Nwb Nj Isuc - Cooling type: water-cooled AF - Insulation class: B - Power range: 3A / 20V up to 330A / 34V - Wire diameter up to 1.6 mm Equipment: - Cooling unit - Control via robot interface

Būklė: naudotas, Techniniai duomenys: Galia: 350 A Bendras galios poreikis: 17,5 kVA Apytikslis įrenginio svoris: 58 kg Įrenginio matmenys: 0,6 x 0,35 x 0,5 m Guedpsu Nwdkofx Ap Ijc Suvirinimo lygintuvo/inverterio komplektas su transportavimo vežimėliu MIG/MAG: 40A / 14V iki 350A / 31,5 V TIG: 10A / 10V iki 350A Rankinis lankinis suvirinimas: 15A / 20,5V iki 350A / 34V Įtampa U1: 380 - 415V Aušinimo tipas: F (vandens aušinimas) Apsaugos klasė: IP 23 be degiklio žarnos komplekto