Ralakde Galios Varža pirkti naudotą (21 155)

Būklė: naudotas, Electric hoist, crane, electric wire rope hoist, cable winch DEMAG type P 10 Serial no. 941 477 Year of manufacture: 1962 Lifting capacity: 2,000 kg with 4 falls Lifting height: 5 meters Lifting speed: 6 m/min Creep lifting speed: 1.3 m/min Reeving: 4/1 Motor power: 0.6 / 2.6 kW Power supply: 380 Volt, 50 Hz - DEMAG hoisting unit, type 19/11 K28P Gsdpjr E Ht Hjfx Ah Hoiw - Electric travel unit DEMAG, type 13 / 6 K8 - 1 travel speed approx. 19 m/min - Trolley for double-T beams, beam width 120 to 180 mm - Load hook for 4 load strands - Pendant control for the hoist with approx. 2.5 meter cable length Required space (L x W x H): 1400 x 900 x 500 mm Weight: 350 kg Good condition

Būklė: naudotas, Electric Forklift Truck LINDE Type E25L-01 Serial No. H2X387D01930 Year of manufacture: 2013 Load capacity: 2,500 kg Lifting height: 4,700 mm Fork length: 1,600 mm Carriage width: 1,150 mm Overall height: 2,200 mm Operating voltage: 80 Volt - Triplex clear view mast with 1,500 mm free lift - 2x additional hydraulic circuits on fork carriage for attachments - Battery pack HOPPECKE type 5HPZS 575, 80 Volt 575 AH with EUW (new battery from 2019) - Automatic charger INDATRON, type D80 Volt / 80 Amp with EUW - 4-wheel superelastic solid rubber tyres, front 225/75-10, rear 200/50-10 - Driver's cab with heating - Hydraulic power steering - 2 LED work lights front - 1 LED work light rear - 1 LED BlueSpot rear - Hour meter shows 15,995 operating hours - New TÜV & UVV inspection Length without forks: 2,500 mm Gjdpfx Asd Rmx Neh Hsiw Overall width: 1,150 mm Dead weight: approx. 4,700 kg Good condition

Būklė: naudotas, Three-phase power meter, current, voltage and power measurement, long-term measurement, energy measurement 3-phase power analyzer, ammeter, voltmeter, digital measuring device, active power, apparent power, reactive power BEHA type UNITEST Power Analyzer 93555 For measuring voltage, current, active power, apparent power, reactive power, power factor, phase angle, frequency measurement, rotation field detection, energy measurement, harmonic analysis. Display: LC multifunction display with backlight Refresh rate: approx. 2 sec. Data logger: 512 kb non-volatile memory (max. 21,000 measured values, max. 10 measurement series) Sampling rate: 5s, 30s, 1 min, 2 min (adjustable) Data transmission: via optically isolated RS232 interface Manual data storage: max. 99 measurements Giedpox A Imzjfx Ah Hew Overvoltage category: CAT III 600 V Power supply: 8 x 1.5V batteries (AA) or plug-in power supply 230VAC / 12VDC (batteries not included) Voltage measurement: - 3 input channels with common reference point "N" - Measuring range: 0 - 600 V AC (RMS) - Display range: 0 - 999.9 V AC (RMS) - Resolution: 0.1 V - Mains frequency: 50 Hz Current measurement: - Measuring range inputs I1, I2, I3: 3 - 999.9 A - Input I4: 3 - 250 A - Display range: 0 - 999.9 A - Resolution: 0.1 A - Jaw opening: 40 mm Active power: - Selectable display of active power per individual channel or total value - Display range: 0 - 999.9 kW - Resolution: 0.1 kW Apparent power: - Calculated from the effective values of voltage and current - Display range: 0 - 999.9 kVA - Resolution: 0.1 kVA Frequency measurement: - Measuring range: 45...80 Hz - Resolution: 0.1 Hz Accessories: - Carrying case - Operating manual - 4 clamp meters - 4 test leads with crocodile clips - RS232 adapter cable - Plug-in power supply 230VAC / 12VDC Overall dimensions (W x H x D): 370 x 270 x 170 mm Total weight: 3 kg Unit tested, fully functional. The housing of 2 clamp meters is damaged and the battery compartment is somewhat oxidized, see photos.

Būklė: labai geros būklės (naudotas), Mașină de frezat transversală. Gjdpfx Ajv U D Aajh Hsiw

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Lamelių profiliavimo ir išilginio pjovimo linija, sudaryta iš: Godpozfvv Asfx Ah Hoiw - Viengrandės profiliavimo staklės 1+1 - Sujungimo transporteris - Dviguba galų pjovimo staklė 2+2 Darbinis plotis: 55 - 100 mm Darbinis ilgis: 160 - 800 mm Darbinis storis: 3 - 6 mm

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Dviguba formatavimo staklės BGD 5+5 varikliai Minimali darbinė plotis 70 mm Gjdpfxozfvvcs Ah Heiw Maksimali darbinė plotis 3000 mm Storis 4–60 mm Galima pritaikyti pagal kliento poreikius

Būklė: labai geros būklės (naudotas), darbinis plotis: 2 500 mm, Dviguba Gabbiani įkirtimo staklės plokštėms 3+3 darbo grupės Gsdpfx Ahozfvufs Hjiw Maksimalus darbinis plotis 2500 mm Atnaujinta, veikianti

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 3 000 mm, bendras svoris: 5 000 kg, įėjimo įtampa: 380 V, Įranga: dokumentacija / vadovas, Dviguba formatavimo staklė Celaschi TSA300DS Slankiojančios dalies atidarymas 3000 mm iš lietimui jautraus ekrano Giodpfezfvtnsx Ah Hew Minimali darbo plotis 200 mm 5+5 variklių grupės Slankiklio plotis 65 mm Vilkimo kaiščiai žingsniu 400 mm Pneumatinė toupie grupės įsikišimas Automatinis CN valdomas įsikišimas Reguliuojamas tiekimo greitis (min/maks) (m/min) 4-24

Būklė: naujas, High-quality mesh deckings with high load capacities, cost-effective alternative to traditional grating – New – Prices on request! Manufacturer: Delta Shelving Type: Manta Mesh Standard widths: Giodpfxjiuvxbs Ah How 885mm (with a 2.70m beam, you will require 3 deckings = 2,655mm) 1335mm Frame depths: 1,050mm 1,100mm 1,200mm Other depths available on request! Uniformly distributed load: between 250 and 1,500kg Standard (price applies to standard version): 1,000kg, i.e., per pallet Mesh aperture: 50 x 100mm or 25 x 100mm Please specify your beam type (traverse type) when making an enquiry! Specify whether box profile (or IPE beam) 50 or 40mm, or stepped beams. Advantages: - No sharp edges - 200% safety factor – independent of rack beams - Rated for permissible deflection and structural failure - Wide selection of standard sizes and load capacities - MantaMESH is our market-leading wire mesh decking solution. - MantaMESH provides peace of mind with over 70% open area and a 200% safety factor, surpassing the requirements of ANSI MH26.2 - 2007, NFPA 13, and FM Global Approval Standard for ESFR sprinklers. - Compatible with ANSI MH26.2 - 2007 - Made in Germany - Pre-welded hemmed support channels - Pre-galvanized finish - Maximum deflection independent of rack beams: 1100 mm deep: 6.67 mm at 1000 kg load - Load at structural failure independent of beams: 1100 mm deep: 2,000 kg - Mesh offers more than 70% open area Example configuration – we are happy to create a bespoke configuration for your application! Depth: 1,102 mm Width: 881 mm 4 pre-welded support channels Mesh size: 50x100mm 1,000 kg UDL independent of support beams Front: 30mm lip bent outward Back: 30mm lip bent downward Article weight: 9.43kg

Būklė: naudotas, Bruderer presas BSTA30. 30 tonų talpa, skaitmeninis ekranas. Kintamas diapazonas 100–600 aps./min. Eigos reguliavimas 8–40 mm. Slankiklio reguliavimas 40 mm. Pagrindinis variklis 5,5 kW. Maksimalus medžiagos plotis 120 mm. Maksimalus medžiagos storis 3 mm. Gijdpfx Asx Sr Nbeh Hew

Gamybos metai: 1996, būklė: labai geros būklės (naudotas), I am selling a double-end profiler milling machine EGURKO ORTZA PDA 56/2. Working width: 200 to 3000 mm Configuration left side / fixed: 3 swiveling side milling units Configuration right side / movable: 3 swiveling side milling units Material pressure belt with top feed. Through-feed machine. Condition: Very good. Available immediately. Machine is assembled, can be switched on right away. Price per unit. 2 units in stock, available immediately. Godpoizrf Nefx Ah Hsiw

Gamybos metai: 2007, būklė: labai geros būklės (naudotas), I am selling a double-end tenoning and milling machine FRIULMAC IDRAMAT, year of manufacture 2007. Working width up to 2500 mm Configuration left side / fixed: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 kW Gisdpfxjib A E Ae Ah Hew 1 + 1 pcs. grooving saw units front + rear with synchronised feed Configuration right side / movable: 1 + 1 pcs. cutting units top + bottom / 3.0 + 3.0 kW 1 pc. special milling unit top / 5.5 kW Material pressure conveyor with overhead feed. Special construction, also suitable for edge dimensioning. Through-feed machine. Siemens Simatic control panel. Condition: Very good. Available immediately.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, I am selling a double-end profiler milling machine SCM CONCEPT NT. Working width up to 3000mm. Configuration left side / fixed: 1 pc. cutting unit 1 pc. milling unit Gisdpfxjtv Rxbs Ah Hew 1 pc. movable jump milling unit Configuration right side / movable: 1 pc. cutting unit 1 pc. milling unit 1 pc. movable jump milling unit Top pressure conveyor belt for material feed. Through-feed machine. Condition: Very good. Immediately available.

Būklė: labai geros būklės (naudotas), I am selling a double-end profiling milling machine CELASCHI TSA 300. Gedpevxu Uhsfx Ah Hsiw Working width up to 3000 mm Feed speed 3–18 m/min Configuration left side / fixed: - 1 pcs. cutting unit 4.0 kW - 1 pcs. milling unit 5.5 kW Configuration right side / movable: - 1 pcs. cutting unit 4.0 kW - 1 pcs. milling unit 5.5 kW Material hold-down conveyor with top-feed system. Throughfeed machine. Condition: Very good. Fully operational. Available immediately.

Būklė: labai geros būklės (naudotas), ATLAS Scissor Lift Table, lifting capacity 4 t TECHNICAL SPECIFICATIONS: - Made in Germany - Table dimensions: 3000 x 1200 mm Giodpfx Aoma Ekaoh Hew - Lifting capacity: 4000 kg - Height when raised: 1195 mm - Height when lowered: 450 mm - Pump motor power: 4 kW - Table weight: 1500 kg

Būklė: geras (naudotas), bendras plotis: 2 300 mm, bendras ilgis: 7 800 mm, bendras aukštis: 2 250 mm, bendras svoris: 15 000 kg, Manufacturer: AXA Model: HFB 600 Control: Siemens 840D Solution Line Year of manufacture: 2015 Specifications Metric US Standard There are (currently) no specifications available for this machine. Dimensions (Approximate) Gsdpfjt Tdp Tsx Ah Hsiw Length: 7,800 mm Width: 2,300 mm Height: 2,250 mm Weight: 15,000 kg Please note: The information on this page has been provided by us to the best of our knowledge and, where possible, was obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, no representations or contractual terms are implied. We recommend verifying all critical details. Finishing of sealing surfaces The finishing of the sealing surfaces of the approximately 17-meter-long tubes is carried out by means of an NC-controlled feed unit and an NC-controlled facing slide equipped with 2 ABS tool holders, suitable for either turning tools, measuring sensors, or measuring probes. The workpiece is first measured using the measuring sensors in the slide heads and aligned by adjustable roller supports. Once the tube is positioned at a right angle and central to the facing slide head, it is hydraulically clamped in place using the floating chuck jaw. The interchangeable measuring sensors calculate the required machining parameters for the surface processing.

Gamybos metai: 2008, būklė: geras (naudotas), Manufacturer: WORTELBOER HOLLAND Model: PBM 24 Year of manufacture: 2008 Clamping range: 215 - 620 mm Rotation range: 170 - 620 mm Stroke: 290 mm Max. wall thickness per cycle: 40 mm Rotation speeds: 25, 38, 50 rpm TRB roller conveyor 7000 mm with V-type Structure height adjustable Godpfsrr Ungox Ah Hsiw Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3200 mm Width: 2200 mm Height: 1700 mm Weight: 12000 kg Please note: The information on this page has been compiled to the best of our knowledge and, where possible, obtained from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. As such, no representations or contractual terms are implied. We recommend verifying all critical details.

Būklė: naudotas, Diesel Forklift Truck LUGLI Type 455e Counterbalance Forklift, Compact Forklift Serial No. 5364010504 Year of Manufacture: 2001 Rated Capacity: 4500 kg Lift Height: 4000 mm Fork Length: 1500 mm Fork Carriage Width: 1300 mm Overall Height: 2720 mm Overall Width: 1460 mm Overall Length without Forks: 2900 mm Own Weight: 6800 kg - Duplex clear view mast with 150 mm free lift - Hydraulic side shifter (200 mm) - 4-cylinder PERKINS diesel engine, Type 1004.42, 60 kW - Hydrostatic drive with dual pedal control (similar to Linde) with Linde/Poclain components - Fully enclosed driver’s cab with heating and removable doors - Fully hydraulic steering - HUSS diesel particulate filter with electric regeneration via 230V mains connection - 2 front working lights, 1 rear working light - Yellow warning beacon on overhead guard - Solid rubber tires (front NEW 250 x 15, rear 23 x 9 - 10) - 5,650 operating hours (read off) - New TÜV safety inspection (UVV) available for an additional EUR 150 net Gsdeu H R I Depfx Ah Hsiw Good condition

Būklė: naudotas, Diesel Forklift, Compact Forklift MORA Type M80CS Serial No. 20087 Year of manufacture: 2006 Rated capacity: 8 tons Lift height: 3800 mm Fork length: 1800 mm Fork carriage width: 1460 mm Overall height: 3030 mm Overall width: 1460 mm Overall length without forks: 3350 mm Gjdpfxjitv Rdo Ah Heiw Own weight: 12,740 kg - Duplex mast with 1950 mm free lift - 4-cylinder PERKINS diesel engine - Fully enclosed driver’s cab with heating - Electro-hydraulic cab tilting system - Hydraulic power steering - 2 front work lights, 1 rear work light - Yellow warning beacon on the overhead guard - Solid rubber tires (Front: 28 x 10 x 22) (Rear: 250/70 - 16) - 9646 operating hours (read from meter) - New safety inspection (UVV-TÜV) Good condition Rental on request

Būklė: naudotas, Electric Forklift Truck OM PIMESPO Type XE 25 ac Counterbalance Forklift, Electric Forklift, Compact Forklift Serial No. SES23X9-10 – Manufacturer No. F14024W00609 Year of manufacture: 2008 Rated capacity: 2,500 kg Gjdpfx Aot Ac Ereh Hsiw Capacity at 500 mm load center: 2,500 kg Lift height: 4,340 mm Overall height: 2,220 mm (container-compatible) Mast height: 2,220 mm Free lift: 1,600 mm Fork length: 1,150 mm Fork width: 100 mm Fork thickness: 40 mm (actual 38 mm – lower bend 35 mm) Fork carriage width: 1,030 mm Operating voltage: 80 volts - 4-wheel, super elastic solid rubber tires – front: 23x9-10 / rear: 18x7-8 - Hydraulic power steering - Triplex free lift mast - Side shifter - Overhead guard - HAWKER traction battery, 80 volts, 560 Ah, year of manufacture 12/2022, supplied with automatic charger - 2,969 operating hours (according to hour meter) - New UVV safety inspection (at extra cost: EUR 150 net) Length without forks: 2,400 mm Overall width: 1,190 mm Own weight with battery: 4,800 kg Good condition

Būklė: naudotas, Electric Forklift Truck JUNGHEINRICH Type EFG 216 Serial Number: FN413671 Year of Manufacture: 2011 Load Capacity: 1,600 kg Lift Height: 4,800 mm Fork Length: 1,220 mm Fork Carriage Width: 980 mm Overall Height: 2,120 mm Operating Voltage: 48 Volts - Triplex mast with full free lift of 1,550 mm - Hydraulic side shift - 2 travel speeds - Battery from year 2015, type 06 EPZS C750 SC (48 Volts, 750 Ah) - Automatic charger, 48 Volts - 3-wheel solid rubber tyres, front 18 x 7-8, rear 140/55-9 - Hour meter reading: 14,725 operating hours - Power steering - Front working lights - New TÜV safety inspection (UVV) available at extra charge (€150 net) Length without forks: 2,000 mm Gisdpjinwzhefx Ah Hjw Overall width: 1,080 mm Own weight without battery: 2,390 kg Own weight with battery: 3,480 kg

Būklė: naudotas, LPG Forklift, Gas Forklift STILL Type RX 70-16T Serial No. 517314G00021 Year of manufacture: 2016 Rated capacity: 1600 kg Lift height: 4920 mm Fork length: 1000 mm Fork carriage width: 980 mm Overall height: 2160 mm Overall width: 1100 mm Godpfeinldwjx Ah Heiw Overall length without forks: 2200 mm Own weight: 3040 kg - Triplex mast with full free lift 1550 mm - Hydraulic side shifter - LPG-electric drive - 4-cylinder Volkswagen LPG engine with 30 kW - Hydraulic power steering - Front working lights - Reverse warning beacon (blue) - Rear strobe warning light (yellow) - 4-wheel superelastic solid rubber tires, front 18X7-8 SE / rear 18X7-8 SE - Battery charger for starter battery, maintenance charger VICTRON - New TÜV safety inspection UVV (surcharge 150,-- EUR net) Good condition

Būklė: naudotas, Elektrinis šakinis krautuvas, mini krautuvas STILL modelis RX 50-10L Mikro-kompaktinis krautuvas Serijos Nr. 515061C00057 Pagaminimo metai 2012 Keliamoji galia 1000 kg Kėlimo aukštis 4900 mm Šakių ilgis 1200 mm Šakių laikiklio plotis 980 mm Bendras aukštis 2160 mm Darbinė įtampa 24 V - Trijų dalių stiebas (triplex) su pilnu laisvu kėlimu 1550 mm - Hidraulinis šoninis poslinkis - NAUJA BATERIJA iš 2025 m. 7 mėn., tipas 5 PzS 625 (24 V / 625 Ah) - Pagalbinis vairavimas - Automatinis įkroviklis TRICOM XL, 24 V 120 Ah Giodpfow T U Dcox Ah Hjw - 3 ratų pilnavidurės baltos gumos padangos 180/70-8 - 2 vnt. darbinės šviesos priekyje - 1 vnt. darbinė šviesa gale - Mėlynas saugos įspėjamasis žibintas važiavimui atbulomis - Skaitiklyje parodyta 11702 valandų - Nauja TÜV UVV patikra (papildomai 150 EUR + PVM) Ilgis be šakių 1680 mm Bendras plotis 1040 mm Svoris be baterijos apie 2157 kg Svoris su baterija apie 2620 kg gera būklė

Būklė: naudotas, Elektrinis vaikštomas krautuvas, JUNGHEINRICH tipas EJC 214 Serijos Nr. 90396426 Pagaminimo metai: 2011 Nominali kėlimo galia: 1400 kg Krovinio svorio centras: 600 mm Nominali kėlimo aukštis: 4300 mm Šakių ilgis: 1150 mm Bendras ilgis: 2050 mm Bendras plotis: 800 mm Aukštis: 1900 mm Darbo įtampa: 24 V - Trigubas stiebas su 1400 mm laisvo kėlimo - elektrinė vairo stiprintuvo pagalba - 1619 darbo valandų (rodyklė) - Akumuliatorius pagamintas 2011 m., tipas 24V 3 PzS 375 (24Voltų/375 Ah) Godpfx Ajxxmfzeh Hjiw - Automatinis įkroviklis Jungheinrich 24 V, 40 A - Papildomas mokestis už naują UVV patikrą = 150 EUR be PVM Svoris: 1300 kg geros būklės

Būklė: naudotas, Elektrinis pėsčiųjų krautuvas JUNGHEINRICH, tipas EJC Z14 250 ZT Serijos Nr. 90358452 Gamybos metai: 2010 Nominali keliamoji galia: 1400 kg Krovinio svorio centras: 600 mm Gjdpsxvdv Eefx Ah Hjiw Nominali kėlimo aukštis: 2500 mm Šakių ilgis: 1150 mm Bendras ilgis: 2050 mm Bendras plotis: 840 mm Statybinis aukštis: 1700 mm Darbinė įtampa: 24 voltai - Pradinė eiga slenksčių pervažiavimui - Duplex stiebas - Nuskaityta 1676 darbo valandų - Akumuliatorius iš 2016 m., tipas 24V 3PZS 375 (24V/375 Ah) - Automatinis Jungheinrich kroviklis 24 V, 50 A - Naujos UVV patikros priemoka = 150 EUR be PVM Svoris: 1200 kg gera būklė