Jbt Frigoscandia Evaporators Ss/Al (Sequential Defrost) pirkti naudotą (15 322)

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: et50, bakelio talpa: 50 000 l, Storage tank with a 50,000-liter capacity for the storage of service water / firefighting water or use as an irrigation tank, for sports field irrigation, etc. Dimensions: Diameter = 2.50 m – Length = approx. 10.70 m The tank is used, emptied, professionally cleaned inside, and coated with a bitumen finish / bitumen insulation on the outside. Minor insulation damage from removal and transport may be present on the tank. Price ex Söhrewald – loaded free of charge – For use as a firefighting water tank, we can fully equip the container with a fire brigade suction connection: consisting of: - 1 piece suction line DN125, stainless steel (V2A), with Storz A fixed coupling and Storz A blank cap, - 1 piece vent pipe DN100 with hood, stainless steel (V2A), - 1 piece anti-vortex plate mounted on suction line, - 1 piece sign "Firefighting water extraction point", - 1 piece dip tube with gauge rod for measuring fill level, - 1 piece manhole cover with bolts and gasket. Bedpfjcydt Uex An Heln The suction line can be used as both a fill and extraction pipe. All components are supplied ready for installation – ex works – Upon request / if required: Installation of an above-ground firefighting water suction connection to DIN 14244, Form B, including A fixed coupling to DIN 14319 and A cover cap to DIN 14319. Housing made from cast iron – exterior coated with epoxy resin. General information: You will receive an invoice with separately stated VAT. The sale takes place according to our general terms and conditions. Other tank systems (new and used) as well as rental systems are also available! In addition, we purchase existing tank systems and can empty, clean, dismantle and transport them with certified specialist company qualifications in accordance with the German Water Resources Act (§ 62 WHG).

Būklė: naudotas, Gamybos metai: 2004, pavaros tipas: kitas, pirmoji registracija: 01/2004, spalva: oranžinė, rida: 1 001 km, vairuotojo kabina: kitas,

Būklė: naujas, - mobili konstrukcija - didelis atskyrimo laipsnis, didelė išsiurbimo galia - lengva naudotis - ilgas filtro tarnavimo laikas, dėl to mažai prastovų - lanksti dėl išsiurbimo technologijos su priekinės plokštės sistema - sertifikuota ATEX 2 zonai ----- Techniniai duomenys ----- Oro našumas: 4 600 m³/h, naudojamas slėgis: 500 Pa, filtracijos plotas su priešfiltriu ir smulkiu filtru: 1 m², jungimo Ø: 300 mm, Bedpfx Aju T Hrpen Heln Variklis 400 V: 1,5 kW, Variklio apsukos: 1 410 aps./min., Matmenys (Ilg. x Pl. x Aukšt.) atidaryta: 1 897 x 1 405 x 1 144 mm, Matmenys (Ilg. x Pl. x Aukšt.) uždaryta: 1 012 x 1 405 x 912 mm, Svoris: 175 kg + 5 m ilgio kabelis su kištuku ir droseline sklende

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Baler BTS-MF75 in stock and available for immediate delivery Bodpfsvah S Aox An Hjln The BTS-MF75 is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 75 kg. With an additional pressing insert, it is also suitable for compressing individual metal and plastic containers as well as cans. The baler impresses with its simple and safe operation and large loading volume. By compacting these waste and recyclables, you achieve a volume reduction of up to 90%, significantly lower your disposal costs, and ensure proper return of the material to the recycling loop. Pressing force: 3.5 tons Bale weight: up to 75 kg (depending on material) Bale size: 1000 H (variable) x 700 W x 500 D mm Machine dimensions: 2335 H x 1040 W x 750 D mm Machine weight: 278 kg Transport height: 2335 / 1800 mm (if required) Loading opening: 700 W x 698 H mm Pressing cycle: 24 seconds Motor: 1.5 kW, 13 Amp Power supply: 230 V (single phase) Noise emission: 68 dB User-friendly lever operation Bale trolley for easy removal of bales Retainer to reduce material spring-back Strapping holder A quality product 'Made in Europe' Suitable for compacting: Cardboard Film Cans and lightweight metal containers Canisters and lightweight plastic containers Textiles Lightweight recyclables Additional options: Annual maintenance with safety inspection (UVV) Machine colour selectable according to RAL Can pressing insert PLC control with automatic press cycle, bale-ready signal, and key-operated E-stop Belt bale ejector + PLC (instead of bale trolley) Strapping bands Power supply 380 – 400 V (three phase) Baler, paper baler, waste paper baler, cardboard baler, cardboard box baler, film baler, paper bale press, waste baler, waste press, recycler press, waste compactor, refuse press, residual waste press

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The BTS-MF250 is the ideal baler for compacting your loose cardboard and film waste into bales of up to 250 kg. With a pressing insert, it is also suitable for compressing small and large drums or other metal containers. The baler stands out for its user-friendly and safe operation as well as its large feed opening. By compacting these waste and recyclable materials, you achieve a volume reduction of up to 90%, significantly cut your disposal costs, and properly return the material to the recycling loop. Pressing force: 15 tons Bale weight: up to 250 kg (depending on material) Bale size: 1000 H (variable) x 1200 W x 800 D mm Machine dimensions: 2900 H x 1759 W x 1185 D mm Machine weight: 985 kg Transport height: 2250 mm Feed opening: 1200 W x 680 H mm Pressing time: 34 seconds Motor: 2.2 kW 16 Amp Power supply: 220 - 240 V (1 Phase) Noise level: 68 dB User-friendly lever operation Bale ejector for easy bale removal Retention claws to minimize material spring-back Strapping band holder A quality product "Made in Europe" Suitable for compacting: Cardboard Film Big bags Drums and metal containers Canisters and lightweight plastic containers Textiles Light recyclables Additional options: Annual servicing including safety inspection (UVV) Custom machine painting according to RAL Press insert for drums and other containers PLC control with automatic press cycle, bale-ready indication, and emergency stop with key Vertical door Strapping bands Power supply 380 - 400 V (3 phase) Baler, paper baler, waste paper baler, cardboard baler, cardboard compactor, film baler, paper bale press, waste baler, refuse press, recycling press, waste compactor, waste press, residual waste press Bjdpfx Anjvalq Aj Holn

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF450 is the ideal baler for compacting your loose cardboard and film waste into a bale weighing up to 450 kg. This baler impresses with its simple and safe operation as well as its large feed opening, making it perfect for handling high volumes of material. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly cut your disposal costs, and return the material properly into the recycling stream. Pressing force: 30 tons Bale weight: up to 450 kg (material-dependent) Bale dimensions: 1000 H (variable) x 1200 W x 800 D mm Machine dimensions: 3000 H x 1781 W x 1196 D mm Machine weight: 1300 kg Transport height: 2300 mm Feed opening: 1200 W x 680 H mm Press cycle time: 40 seconds Motor: 5.5 kW, 16 Amp Power supply: 380 – 400 V (3-phase) Noise emission: 68 dB Double-cylinder system for even material compaction User-friendly lever operation Bale ejector for easy removal of bales Blsdpfx Anevamafo Hjn Retaining claws for minimizing material spring-back Bracket for securing strapping A quality product ‘Made in Europe’ Suitable for compacting: - Cardboard - Film - Big bags - Clothing - Light recyclables Additional options: - Annual maintenance and safety inspection (UVV test) - Machine color available in RAL - PLC control with automatic press cycle, bale-ready indicator, and E-stop with key switch - Vertical door - Strapping bands - 11 kW / 32 Amp motor option Keywords: baler, cardboard baler, waste baler, paper baler, cardboard press, film baler, waste compactor, refuse press, recycling press, residual waste press

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF500LH is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 500 kg. Due to its compact design, it is particularly suitable for areas with limited ceiling height. The baler impresses with its user-friendly and safe operation as well as its large feed opening. By compacting these waste and recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and ensure the material is properly returned to the recycling loop. Pressing force: 50 tonnes Bale weight: up to 500 kg (depending on material) Bale size: 1100 H (var.) x 1400 W x 800 D mm Machine dimensions: 2249 H x 2041 W x 1350 D mm Machine weight: 2100 kg Transport height: 2249 mm Filling opening: 1400 W x 680 H mm Pressing cycle time: 35 seconds Motor: 11 kW, 32 Amp Power supply: 380 - 400 V (3-phase) Noise level: 68 dB PLC control with automatic press cycle, bale-ready indicator, and emergency stop with key Strap bale ejector for easy removal of bales Retainer claws to minimize material spring-back Low overall height, perfect for low-clearance areas Operating hours counter Holder for 6 rolls of strapping tape A quality product “Made in Europe” Suitable for compacting: Cardboard Film Bodpfxjva Ekvj An Hjln Big Bags Cans and PET bottles Light recyclables Additional options: Annual maintenance with UVV inspection Custom machine color according to RAL Strapping tapes Baler, paper baler, waste paper baler, cardboard baler, cardboard compactor, film baler, paper bale press, waste baler, waste compactor, recyclable press, refuse compactor, bin press, residual waste baler.

Būklė: naujas, Pre-separator integrated Automatic extinguishing system integrated Efficient and economical: Large-capacity compressed air tank with fast-acting diaphragm valves for effective OPTI JET filter cleaning and minimal compressed air consumption. Simple yet effective: OPTI JET cleaning and bag filters with snap ring closure. Exceptionally economical: Energy-efficient drives according to IE3 standard. Safe in every situation: Easy-to-maintain automatic fire extinguishing system. Exceptionally quiet: sound-insulated air recirculation by AL-KO. All options available: PLC control for manual and automatic operation. Numerous options, from machine recognition and slide valve control to frequency-controlled operation—just to name a few. No spillages: collection container with inspection window. Practical down to the details: container locking with ergonomically designed tension lever. Retrofittable: Can be converted for discharge via briquette press or rotary valve. - High suction power - Minimal space requirement Blodpfeu R S A Rjx An Hjn - 100% air recirculation without temperature loss (Residual dust < 0.1 mg/m³) - Integrated pre-separator and expandable control unit - Optimal filter cleaning - Minimal noise level - Optional: patented fill level monitoring - Maintenance-friendly, certified automatic fire extinguishing system - Dust barrier for dust-free container changes - Optional: safety locking mechanism for containers - Freely configurable and expandable module exchange ----- Technical Data ----- Extraction connection Ø: 300 mm Nominal air flow: 5,089 m³/h Max. air flow: 6,000 m³/h Max. negative pressure: 2,587 Pa Filter area: 30 m² Chip collection volume: 3 x 250 liters Number of bags: 3 pcs Motor (400 V): 7.5 kW Dimensions (LxWxH): 3,000 x 1,058 x 2,361 mm Sound pressure level: 71 dB(A) Weight: 838 kg Standard: GS-HO-07 - New showroom machine -

Būklė: naujas, Gamybos metai: 2025, DPF MASTER FLASH PROFESSIONAL™ A professional device for the regeneration of DPF/FAP/GPF filters and catalytic converters, designed for passenger cars and light commercial vehicles. It features a 185-liter tank, a pump with a capacity of up to 133 L/min, and an integrated drying system. The machine’s interior is made of stainless steel (AISI 304) and acid-resistant steel (AISI 316). The cleaning technology operates in a closed circuit using a hydrodynamic method. The device allows for measurement of filter contamination both before and after the regeneration process, with results displayed in mbar. It is equipped with an integrated drying system capable of temperatures up to 100°C. Upon completion of the regeneration, a final backpressure test is performed and provided to the customer in printout form. This comprehensive cleaning process can restore the factory performance parameters of the filter by up to 99.9%. Components from leading European manufacturers are used in the machine’s construction, ensuring the highest quality and reliability. EQUIPMENT: • 7-inch color touchscreen • Sensors: liquid level, liquid and air temperature, pressure flow, door opening • Safety features: emergency stop switch, chamber door limit switch, phase loss and phase sequence monitoring • Filter contamination measurement system • Chamber made from AISI 316 stainless steel • Advanced 4-stage fluid filtration system • Integrated drying system with stepless regulation in a temperature range of 70 to 100 °C • Cooling system for the drying unit • Integrated thermal printer for printing filter parameters • Ethernet controller for remote diagnostics • Adapter set for connecting DPF / FAP / GPF / KAT / SCR filters • Starter consumables set (one filter set + 2L XTON DPF cleaning agent) • Fluid tank with a volume of up to 185 l • Extended manufacturer’s warranty of 12 months (optional: 24 or 36 months) ADDITIONAL OPTIONS: Bodpfx Anegllwij Hsln • Automatic dual-sided filter cleaning • Separate fluid circuit with an additional pump • Fluid tank thermal insulation • Automatic fluid refill • Automatic dosing of cleaning agent • Quick-X filter mounting system • EURO5 and EURO6 adapters

Būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, Underground tank, fire water tank, storage container made of steel with a capacity of 30,000 liters, suitable for storage of service water / fire water. Dimensions: D = 2.00 m - L = approx. 10.00 m The tank is equipped with a DN 600 manhole with a dome cover, is used, emptied and professionally cleaned internally, and externally treated with a bitumen coating / bitumen insulation. The tank features a permanently welded access shaft made of steel sheet, including a walk-on cover. Shaft dimensions: approx. 900 x 900 x 1,000 mm (Width x Depth x Height) Minor insulation damage may be present due to removal and transport. Price ex Söhrewald – loaded free of charge – Blsdpfx Aji Ary Son Hon Optional: For use as a fire water tank, we can equip the container fully with a fire brigade suction connection, consisting of: - 1 pc. suction pipe DN125, stainless steel (V2A), with Storz A fixed coupling and Storz A blank cap - 1 pc. vent pipe DN100 with stainless steel (V2A) cap - 1 pc. anti-vortex plate mounted on the suction pipe - 1 pc. warning sign "Fire water draw-off point" - 1 pc. dip tube with measuring rod for level measurement - 1 pc. dome cover with bolts and gasket The suction pipe can be used as both a filling and extraction pipe. The components are supplied ready for assembly – ex works – If desired or required: Installation of an above-ground fire water suction connection to DIN 14244 – Type B, including A fixed coupling to DIN 14319 and A cover cap to DIN 14319. Housing made of cast iron, externally coated with epoxy resin. General: You will receive an invoice with VAT shown separately. The purchase is subject to our general terms and conditions. Further tank systems (new and used), as well as rental units, are also available!

Gamybos metai: 2026, būklė: naujas, Funkcionalumas: visiškai funkcionalus, Liquid Fertilizer / UAN / ASL – Tank Container Storage Tank Storage Vessel 100,000 liter capacity – brand new – above-ground, made of steel plate. The tank complies with DIN-EN 12285-2 (formerly DIN 6616-D), features 2 saddle supports, an access ladder, and is externally primed – on untreated plates. Diameter = 2.90 m – Length = approx. 16.00 m. The tank is equipped with a brand-new internal plastic liner, including a leak detection device mounted in a protective box – see sample photo. The plastic liner has a “General Building Authority Approval” and is therefore suitable and approved for the storage of liquid fertilizer-UAN as well as NOx reduction agent AUS 32 (AdBlue). The price is ex works – free loading at the factory. (Delivery can be offered at an additional, economical cost.) Our recommendation: Externally sandblast the above tank, prime it, and fully repaint it – traffic grey / RAL color shade. (Other RAL colors are also available on request!) Bljdpfxei A Hxvo An Hsn ASL (Ammonium Sulfate Solution) is a sought-after liquid fertilizer produced in drying plants during the drying of liquid digestate and in exhaust air purification processes. ASL tanks require an internal plastic liner due to the corrosive nature of the stored medium. Important: The tank depicted (sample photo) is a refurbished 100,000-liter tank that has already been delivered to a customer. Plastic piping (PVC fittings) is not included in the scope of delivery and can be purchased at an additional cost. General Information: You will receive an invoice with VAT shown separately. The purchase is subject to our general terms and conditions. Additional storage tanks (new and used) as well as rental tanks are also available! Furthermore, we buy existing tank systems and, with certified specialist qualification according to WHG (German Water Resources Act), can professionally empty, clean, dismantle, and remove them. ===== For further inquiries, please contact: ===== Alfred Schneider GmbH & Co. Tankbau KG Mr. Heß / Mr. Jakob Tiefenrod 2 34320 Söhrewald near Kassel / Hesse =====

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, bendras aukštis: 500 mm, bendras plotis: 300 mm, bendras ilgis: 5 500 mm, bendras svoris: 2 200 kg, Oelze hard stone measuring beam - Dimensions: 5500 x 300 x 500 mm - Accuracy grade 00 = 11 µm (2 µm per 1000 mm) Bsdpfx Aor Ellrsn Heln - Test certificate optional - Side guideway designed as T-rail on the rear side - With 5 granite supports (working height approx. 900 mm) Incl. air-bearing measuring carriage for checking straightness, etc. Incl. probe with spherical tips and two evaluation units (Helios)

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The BTS-MF40 is the ideal baler for compacting your loose cardboard and film waste into a bale of up to 40 kg. The baler stands out due to its simple and safe operation, making it optimal for small material volumes and producing compact and easily manageable bales. By compressing these waste/recyclable materials, you achieve up to 90% volume reduction, significantly lower your disposal costs, and properly return the material to the recycling cycle. Pressing force: 2 tons Bale weight: up to 40 kg (material-dependent) Bale size: 600 H (var.) x 535 W x 460 D mm Machine dimensions: 1756 H x 718 W x 644 D mm Machine weight: 187 kg Transport height: 1756 mm Feed opening: 522 W x 490 H mm Pressing time: 20 seconds Motor: 1.5 kW, 13 amp Power supply: 220 - 240 V (1 phase) Noise level: 68 dB User-friendly lever operation Bale trolley for removing the bales Retention claws to reduce material spring-back Blsdpeu Iwgvofx An Hen Holder for two rolls of strapping tape A quality product "Made in Europe" Suitable for compacting: Cardboard Film Cans and light metal containers Canisters and light plastic containers Clothing Light recyclables Additional options Annual maintenance with UVV inspection Machine color according to RAL Can crusher insert AUTO control with automatic press cycle Strapping tapes Power supply 380 - 400 V (3 phase) Baler, paper baler, waste paper baler, cardboard baler, cardboard press, film press, paper bale press, waste baler, waste compactor, recycling press, refuse compactor, refuse press, municipal waste press

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2021, spaudimo jėga: 400 t, Gantry Straightening Press – Manufacturer: Hidrobrasil – 400 t Gantry Straightening Press – Table 6,000 × 3,000 mm For sale is a high-performance gantry straightening press from Hidrobrasil with a pressing force of 400 t. The machine features a large table area of 6,000 × 3,000 mm, a movable bridge structure, and a laterally traversing cylinder, making it ideal for large-scale straightening, assembly, and heavy-duty operations. ===== Technical Data & Information: Gantry Straightening Press Hidrobrasil – 400 t Gantry Press ==== General Information - Manufacturer: Hidrobrasil - Model: Gantry Straightening Press - Design: Gantry Press / Double Upright Press - Pressing Force: 400 t (4,000 kN) - Machine Weight: approx. 52 t - Dimensions (L × W × H): 6,000 × 5,000 × 4,500 mm ==== Working Area - Table Size: 6,000 × 3,000 mm - Clearance Height: 1,500 mm Bjdpfxjhyc Nwe An Hsln - Stroke: 1,500 mm - Table Height: approx. 900 mm ==== Construction & Features - Movable bridge via rack and pinion with two geared motors - Cylinder laterally movable on rack and pinion - Table with grid construction - T-slots according to customer specification - Cylinder induction hardened - Machine frame double-coated / powder-coated - Lubrication via grease nipples - Operation via swing arm on the bridge - Pressure setting via monitor (60 – 400 t) - Oil temperature display at tank ==== Forces & Precision - Free lifting force: 600 kN - Pressure accuracy: ± 5 bar - Deflection: ≤ 0.8 mm/m (at 70% load) - Pressure build-up time: 2 – 3 s (steel on steel) ==== Speeds - Pressing speed: up to 17 mm/s - Fast stroke (closing): 17 mm/s - Opening speed: up to 60 mm/s ==== Hydraulics - Main pump: Bosch Rexroth, approx. 150 l/min - Operating pressure: max. 280 bar - Oil volume: approx. 900 l (HLPD 46) - Ambient temperature: max. 45 °C - Oil temperature: max. 55 °C - Number of cylinders: 1 ==== Electrical - Main power supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Motor power: 30 kW (IE3) - Total connected load: approx. 35 kW ==== Additional Information - Thermal working range: 80 – 120 °C - Operator sides: 3 - Sound pressure level: max. 78 dB(A) - Minimum hall height: 5,500 mm ===== Straightening, large component processing, heavy-duty assembly, forming technology, steel construction, toolmaking, maintenance, special applications Gantry press, straightening press, double-column press, large press, hydraulic press, heavy-duty press, tool adjustment press, tryout press, tool try-out press Are you looking for a hydraulic press tailored to your application? Contact us for an individual quote. Our hydraulic presses are manufactured in compliance with German machinery guidelines as well as European Machinery Directive (Directive 2006/42/EC), EC standards, and EU safety requirements. In addition, our presses exceed Canadian and European safety standards, as they fully comply with the national Brazilian safety regulation NR 12, which builds on these standards. Our major strength is custom machine building and press automation. We supply tailor-made hydraulic presses at surprisingly competitive prices. For hydraulics, we mainly use components from leading European manufacturers.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, The BTS-MF550 is the ideal baler for compacting your loose cardboard and film waste into bales weighing up to 550 kg. This baler impresses with its simple and safe operation as well as its large loading volume, making it optimal for high material throughput. By compacting these waste/recyclable materials, you achieve up to 90% volume reduction, significantly reducing your disposal costs and properly returning the material to the recycling stream. Pressing force: 50 tons Bale weight: up to 550 kg (dependent on material) Bale size: 1200 H (var.) x 1500 W x 800 D mm Machine dimensions: 3217 H x 2115 W x 1200 D mm Machine weight: 1650 kg Transport height: 2500 mm Filling opening: 1500 W x 770 H mm Pressing cycle time: 40 seconds Motor: 5.5 kW, 16 Amp Power supply: 380 - 400 V (3 phase) Noise level: 68 dB Double-cylinder system for even material compaction User-friendly lever operation Bale ejector for easy bale removal Retainer to minimize material spring-back Strapping band holding device A quality product "Made in Europe" Suitable for compacting: Cardboard Films Big bags Textiles Light recyclables Bjdefgbtcjpfx An Heln Additional options: Annual maintenance with UVV safety inspection Machine colour according to RAL PLC control with automatic pressing cycle, bale ready indicator, and key-operated emergency stop Vertical door Strapping bands 11 kW 32 Amp motor Baler, paper baler, waste paper baler, carton baler, cardboard baler, film baler, paper bale press, waste baler, compactor, recycling press, waste compactor, refuse compactor

Būklė: geras (naudotas), Drawbar, coupling bar, overrun brake - Height-adjustable drawbar - Cranked design - Equipped with overrun brake - Support load: 100 kg - Permissible total weight: 1000 kg Bjdpfxognna Ho An Heln - Quantity: 12 drawbars available - Price: per unit - Net weight: 40 kg

Būklė: geras (naudotas), Drawbar, hitch, overrun brake - Height-adjustable drawbar - Cranked design - With overrun brake Bjdpfx Ajgnnbgen Hsln - Support load: 100 kg - Permissible total weight: 1600 kg - Quantity: 14 drawbars available - Price: per unit - Dead weight: 65 kg

Būklė: paruoštas naudoti (naudotas), Fagor MOCA-1145 length measuring scale with MC-A reading head, SN: 118001319060894 – Total length: 125 cm, used, minor signs of wear, fully functional, scope of delivery as per photos. Bljdpfx Anet Iy Uzj Hsn

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2011, bendras svoris: 1 300 kg, keliamoji galia: 160 kg, gerklės gylis: 3 500 mm, darbinio aukščio: 2 150 mm, Al-Vac Powerlift. Mobile pillar jib crane with articulated arm. Mounted on a robust steel base/foot, it can be positioned on a level surface and put into operation immediately. Alternatively, it can be permanently anchored in a concrete floor if required. The lifting/lowering function is controlled by gently raising or lowering by hand directly above the hook. This makes lifting loads of up to 160 kg feel effortless – virtually like lifting by hand. Reach: 3,500 mm. The inner joint of the jib swings approx. 270 degrees, the outer joint even further, allowing access to the entire pillar area. Load capacity: 160 kg. Lifting height: 2,150 mm + 120 mm base. Overall height: 3,560 mm + 120 mm base. Clear height under the jib: 3,330 mm + 120 mm base. Loading and delivery available at extra cost. Disassembly for more cost-effective transport possible. Bodpfx Aoywti Ton Hsln The crane requires a 230 V socket and is ready for use immediately. Exceptionally easy to operate. The crane is from 2011, but is mechanically almost as-new. A comparable new unit now costs approx. €26,000. A demonstration video can be sent via WhatsApp.

Būklė: naudotas, Gamybos metai: 2005, pavaros tipas: kitas, pirmoji registracija: 01/2005, spalva: oranžinė, rida: 1 001 km, tuščias svoris: 1 690 kg, vairuotojo kabina: kitas,

Būklė: labai geros būklės (naudotas), Gamybos metai: 2014, Skaitiklio rodmuo: 71 mln. paspaudimų Įranga / papildoma informacija: HP IndiChrome Plus 7 spalvų spauda spaudos mašinoje Baltų dažų modulis – leidžia naudoti baltus dažus Techniniai duomenys Spausdinimo greitis: 120 keturių spalvų A4 formatų vaizdų per minutę (dvipusis); 240 dviejų spalvų arba juodai baltų A4 vaizdų per minutę (dvipusis) Vaizdo raiška: 812 ir 1219 dpi, 8 bitai; adresuojamumas: 2438 x 2438 dpi HdI (High Definition Imaging) Didžiausias popieriaus formatas: 330 x 482 mm Vaizdo formatas: 317 x 464 mm Bsdpfx Anozavhce Hjln Popieriaus svoris*: dengtas: 80–350 g/m²; nedengtas: 60–320 g/m²; storis: 70–400 mikrometrų Spaudos mašinos matmenys: plotis: 5443 mm; gylis: 2298 mm; aukštis: 2104 mm

Būklė: geras (naudotas), Prikabinimo jungtis, kablio jungtis, žiočių jungtis Bljdpfsyvrulex An Hjn - Gamintojas: AL-KO, stabdžių ašis - Tipas: B 2000-4 - Stabdys: tipas 3081 A - Stabdžių būgnas: Ø 325 mm, įduba Ø 160 mm / tvirtinimo skylių skersmuo Ø 205 mm - Matmenys: žr. nuotraukas - Transportavimo matmenys: 1750/660/H340 mm - Svoris: 134 kg

Gamybos metai: 2005, būklė: naudotas, Ištraukimo įrenginys aplinkos oro dulkėtumui sumažinti. Variklis suka ventiliatoriaus ratą, taip sukuriamas vakuumas. Oras yra įsiurbiamas per įsiurbimo antgalį į mašiną ir patenka į filtravimo elementus. Apdorotas oras vėl išpučiamas. Mašina (papildomai): Dirbtuvių dulkių šalinimas Nominali oro srauto apimtis: 1400 m³/h, minimali oro srauto apimtis: 1 108 m³/h Galia: 2,2 kW Srovė: 5 A Įtampa: 400 V Dažnis: 50 Hz Bjdszgczhjpfx An Hjln Pagrindinė konstrukcija: ant rėmo su ratukais Įranga: 140 mm įsiurbimo antgalis; oro filtras (C kategorija, el. pagal reikalavimus); asinchroninis variklis (gamintojas EMGR)

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1994, mašinos/transporto priemonės numeris: 941108, Funkcionalumas: visiškai funkcionalus, bendras aukštis: 2 520 mm, bendras ilgis: 2 580 mm, bendras plotis: 1 000 mm, Kompaktiška atliekų surinkimo sistema su 3 maišais – BE ventiliatoriaus Nominali oro srauto galia: 5000 m³/h, esant esamam ventiliatoriui – gali siekti iki 7500 m³/h Filtro paviršius: 37,5 m² Filtravimo technologija: AL-KO Opti-Jet sistema, susidedanti iš oro srauto valymo (valdoma sekos principu) ir paviršiaus filtravimo Atliekų surinkimo talpa: 8 elektromagnetiniai vožtuvai Įsiurbimo jungtis: NW 355 mm Suspausto oro jungtis: 1", suspaustas oras be vandens ir aliejaus Mažiausias suspausto oro slėgis: 8,5 baro: 1140 NL/valymas Darbinis slėgis: maksimaliai 8,5 baro Gaisro gesinimo jungtis: 1 x 1 1/2" Išmatavimai (plotis x gylis) apytiksliai: 2572 x 981 mm Bsdozqan Hepfx An Heln Aukštis apytiksliai: 2520 mm Svoris be filtro apytiksliai: 457 kg JET valymo sistema: tiesioginis oro srautas į filtro vidų užtikrina efektyvų išorinių filtro vamzdelių valymą. Lengva priežiūra: dideli prieigos durys palengvina filtro priežiūrą, papildomi priežiūros dangčiai Aukštos kokybės filtro medžiaga: alyvą ir vandenį atstumiantis filtravimo paviršius, skirtas problematiškoms dulkėms (dažų dulkės, drėgnos dulkės), filtras plaunamas Tolygus maišų užpildymas: be pakopų reguliuojamos paskirstymo sklendės užtikrina tolygų maišų užpildymą Tinkamas ventiliatorius: žr. prekės numerį 7458, D = 250 mm – 5000 m³/h oro srauto galia Naudojant ventiliatorių D = 350 mm, galimas iki 7500 m³/h oro srauto galia!!!

Būklė: naudotas, Gamybos metai: 1999, Funkcionalumas: visiškai funkcionalus, galia: 3 kW (4,08 AG), įėjimo įtampa: 400 V, tūrio srautas: 2 780 m³/val, AL‑KO Mobil‑Jet 200, 3 kW, 400 V, pagaminimo metai – 1999, našumas – 2 780 m³/h, jungties skersmuo – 200 mm, veikia/galima demonstruoti. Bodpfx Anozx Swij Hsln Pirkėjas atsakingas už atsiėmimą ir pakrovimą. Pageidaujant, galima pridėti reikiamus vamzdžius. Kaina: 1 900,00 EUR (be PVM), atsiimant vietoje.