Hecht Ag Asb Längenmessgerät pirkti naudotą (7 743)

Gamybos metai: 2023, būklė: naujas, Control system with motor for all older NC feed units. Replacement for Alba, Schleicher, Dreher, PA, etc. Torque range: 6–90 Nm Itsdpfx Ascn Du Ieb Nsi Complete price starting from €3,900 for Alba stepper motors, from €5,900 for servo drives. Can be installed by any qualified electrician.

Gamybos metai: 2017, veikimo valandos: 30 h, būklė: beveik kaip naujas (parodų įrenginys), Maximum strip thickness: 4 mm Strip width: 300 mm Repeat accuracy: +/- 0.05 mm NC drive with compact controller Itedpfxob Nbglj Ab Nji Feed force: 3,000 N (300 kg) Maximum strip pressure: 1.2 t

Būklė: geras (naudotas), Velenas / Spindle 3,5 - 16 - 10 kVA 2750 - 14660 - 23660 aps./min Itjdpfxjp I T Rqs Ab Nei Apžiūra galima iš anksto susitarus mano sandėlyje!

Gamybos metai: 1980, būklė: naudotas, mašinos/transporto priemonės numeris: 30245035, Offered here is a double scissor lift table. The machine was manufactured in 1980 and has a load capacity of 4,000 kg. The lift table is equipped with a powered roller conveyor system and features XYZ functionality (lifting, traversing, and powered rollers, etc.). Thanks to the separate control unit, the load is moved at an almost constant lifting and lowering speed. The robust construction includes a sturdy scissor bracing and a separate control unit. The unit measures 8.20 m in length and 1.20 m in width. The conveyor belt is 80 cm wide with roller diameters of 10 cm. Iedpfxogtmv Ss Ab Noti

Gamybos metai: 2020, būklė: beveik kaip naujas (parodų įrenginys), plasma-nitrided rollers 64 HRC, max. sheet thickness 3 mm, max. width 120 mm, repeat accuracy +/- 0.06 mm at 50 mm feed, 350 strokes/min, 180° free angle Iodog Ew Ixjpfx Ab Neti

Gamybos metai: 2004, būklė: visiškai atnaujintas (naudotas), Precision feed for strips up to approx. 100 mm wide and up to 2 mm thick. Itsdpfx Aog Iiuxsb Noi Feed force: 400 N Repeatability: +/- 0.04 mm

Gamybos metai: 2023, būklė: beveik kaip naujas (naudotas), Feed force 3000 N, accuracy 0.04 mm, material cross-section 1000 mm². Warranty 2 years, band width 600 mm. Iodpfx Aolczm Iob Njti

Gamybos metai: 2018, būklė: beveik kaip naujas (parodų įrenginys), Maximum band width: 140 mm Band thickness: up to 1.5 mm Accuracy: +/- 0.05 mm Tensile force: 500 N (50 kg). Iedpfx Abecn Dv No Neti

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2018, 4. Generation des XXL-Systems von Imaging Solutions: 5-in-1-Lösung. Eine LayFlat-Buchblockfertigung aus Einzelblättern in nur einem Arbeitsgang. Mit nur einem Knopfdruck werden alle nötigen Einzelschritte automatisch ausgelöst: Schneiden, Rillen, Falzen, Pressen und Verkleben. LayFlat-Buchblöcke werden mit minimalem Personaleinsatz produziert, wodurch eine Fertigstellung und der Versand noch am selben Tag möglich sind. Technische Daten: - 2.300 Bogen pro Stunde - XL-Buchblockformate bis 370 mm x 457 mm (14,5" x 18") - Hohe Leistungsfähigkeit: bis zu 250 Buchblöcke/Stunde - Barcodegesteuerte Produktauswahl: Unterschiedliche Seitenlängen und Buchkonfigurationen (Inlays) innerhalb einer Bahn möglich – reduziert Rüstzeiten - Optionaler Inlay-Zuführer mit Stapelhöhe bis 220 mm (8,66") - Unbegrenzte Anzahl von Inlays kann zwischen zwei Seiten eingeklebt werden - Aktive Verstellung des Leimkopfs für präzise und homogene Klebstoffauftragung - Optionale Inline-Buchpresse für perfekte Buchrücken - Einfach zu bedienen über Touchscreen – vollautomatisches 5-in-1-Finishing-System - Schneiden, Rillen, Falzen, Pressen und Verkleben in nur einem Arbeitsschritt - Vollständige LayFlat-Buchblöcke aus Einzelblättern – integrierbar in barcodegesteuerte Workflows (z.B. inline mit Dreimesser-Schneider) Itsdpfx Asn Ut D Nsb Nji - Sorgt für gleichbleibende Premiumqualität bei niedrigen Produktionskosten - Premium-LayFlat-Fotobuchtechnologie für Panoramaseiten - Verarbeitet Original-Fotopapier und Digitaldruckpapier.

Gamybos metai: 2012, būklė: labai geros būklės (naudotas), easyFrame ist eine halbautomatische Lösung für das Keilrahmenaufziehen, entwickelt von Imaging Solutions AG. Die Maschine kann bis zu 50 Rahmen pro Stunde verarbeiten (je nach Bediener). Sie befindet sich in ausgezeichnetem Zustand. Mit den Rahmenhaltern können Keilrahmen für Leinwandgrößen von 8x6 bis 43x43 Zoll gefertigt werden. Itedpfx Absn Ut Hco Nei

Būklė: geras (naudotas), Bosch Rexroth aluminium profile workstation Bosch Rexroth aluminum profile Complete plastic glazing 4 cm worktop with a light gray melamine resin direct coating 190 x 90 cm Workstation dimensions WxDxH 195 x 93 x 220 cm Magnifier lamp 8062D2 Isdpjqbq E Eofx Ab Noti You can find more new and used items in our shop! International shipping costs on request!

Būklė: geras (naudotas), Gamybos metai: 2000, Leutenegger (Starrag) Washing Box Technical Data Year of manufacture: 2000 Tank capacity: approx. 0.9 m³ Chemical: Henkel P 3 Voltage: 3x400V/230V 50 Hz Power supply: 40 A Control voltage: 24 V DC Max. temperature: 50°C Heating: electric Heating capacity: 3x3.25 kW = 9.75 kW Working pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m³/h Ieded Ncihspfx Ab Neti Shipping costs on request You can find more new and used items in our shop! International shipping costs on request!

Būklė: geras (naudotas), Leutenegger (Starrag) plovimo dėžė Techniniai duomenys Vonios talpa: apie 0,9 m3 Chemija: Henkel P 3 Įtampa: 3x400V/230V 50 Hz Maitinimas: 40 A Valdymo įtampa: 24 V DC Maksimali temperatūra: 50 °C Šildymas: elektrinis Šildymo galia: 3x3,25 kW = 9,75 kW Iedpfjd Nlybox Ab Njti Darbinis siurblys: 3 kW Ištraukiamo oro ventiliatorius: 0,37 kW Ištraukiamo oro kiekis: 400 m3/h Siuntimo išlaidos pagal užklausą Finansavimas per mūsų banką taip pat galimas. komplett-konzept.leasingo.de Daugiau prekių – naujų ir naudotų – rasite mūsų parduotuvėje! Tarptautinio pristatymo kainos pagal užklausą

Būklė: geras (naudotas), BALZERS LTE 020 – Termiškai valdoma mėginių paruošimo stotis ✔ Naudojimo sritys: dangų technologijos, puslaidininkių apdirbimas, paviršių analizė, elektroninė mikroskopija/ • Skaitmeninis ekranas su 4 kanalais (B1–B4) • Temperatūros rodymas °C • Nustatymas per SET / UP / DOWN • Atskiras tinklo ir lempos valdymas • Maitinimo įtampa: 220 V Pastaba: Dėl detalių techninių duomenų ir naudojimo rekomendacijų primygtinai rekomenduojame peržiūrėti originalius duomenų lapus arba tiesiogiai kreiptis į gamintoją. Ijdpsxl A Edefx Ab Noti Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio pristatymo kainos – pagal užklausą!

Būklė: geras (naudotas), Gamybos metai: 2016, Bosch Rexroth linijinis cilindras – mašina Mašina yra specialus gaminys, sukurtas Bosch įmonės vidiniam naudojimui gamybos procese. Mašinos komplektacija: Rexroth MSK050C-0600-NN-M1-UG1-NNNN trijų fazių sinchroninis PM variklis Itsdpjhufclsfx Ab Noi Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 – Įtampa: 380–480 V, 6 bar, 1300 kg, pagaminimo metai: 2016 Būklė: naudota Pilnas gamyklos uždarymas, didelis pasirinkimas sandėlio antresolių, palečių ir lentynų stelažų, paternosterinių sistemų. Aukštos kokybės pramoninės staklės: tekinimo, šlifavimo, rankiniai įrankiai. Galimas finansavimas per mūsų banką. komplett-konzept.leasingo.de Daugiau naujų ir naudotų prekių rasite mūsų parduotuvėje! Tarptautinio pristatymo kaina pagal užklausą!

Būklė: geras (naudotas), Gamybos metai: 1989, mašinos/transporto priemonės numeris: AN-No.: 89.04.019 A, 5 units Jakob Müller Frick AG NF 42, each in 4/42mm configuration (5x available) with Müdata, Mütrans, without creel, exceptionally clean machines from Germany, 2nd hand NF42 in 4/42mm from 1988–1990 AN. No.: 88.04.017 H ex Alge, with Müdata, 16 shafts, very clean, €7,000 AN. No.: 88.04.169 D ex Alge, with Müdata, 16 shafts, very clean, €7,000 No. 213 AN. No.: 89.04.019 B ex Alge, with Müdata, 16 shafts, very clean, €7,000 No. 223 Iodpfx Aer I Am Heb Njti AN. No.: 89.04.046 B ex Alge, with Müdata, 16 shafts, very clean, €7,000 AN. No.: 90.00.066 B ex Alge, with Müdata, 16 shafts, very clean, €7,000

Būklė: geras (naudotas), Gamybos metai: 1989, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: AN-No.: 88.04.017 D, 8 units of very clean (refurbished) Jakob Müller Frick AG weaving looms NF42 from 1988, 1989, and 1990 available from my stock. All machines are running smoothly and are 100% operational (completely overhauled). Each machine has 12 shafts, is supplied without creel, and comes with Mütrans, some also with Müdata. 1 unit NF 2/84mm from 1989 for €6,900 Stock no.: 88.04.017 D, with Müdata and Mütrans, 16 shafts 3 units NF 2/84mm overhauled from 1990, each at €6,500 Stock no.: 90.01.704 B Stock no.: 90.01.755 A Stock no.: 90.01.229 A 1 unit NF 2/84mm overhauled from 1989 for €6,500 Stock no.: 89.00.118 D 3 units NF 2/84mm overhauled from 1988, each at €6,500 Stock no.: 88.04.244 A Stock no.: 88.02.758 A Stock no.: 88.02.758 B The machines originate from a curtain tape production and were originally equipped with a Z compartment. They have been converted to standard compartments as part of the general overhaul. Iedpfor Ix Igex Ab Noti All tension beams and pressure rollers have been newly vulcanized by Westland. The card rollers in the chain case are also new or have been newly vulcanized. The central lubrication unit in the chain case has been optimized by us. All machines have the first shaft position free (for heavier reeds) and are fitted with 12 shafts. All machines are equipped with Mütrans II. Machines can optionally be supplied with double belt take-off (for heavy fabrics). This is possible for 4–5 machines, as far as I know. It is also possible to equip them with fine-knurled tension beams, also for 4–5 machines. All needle holders are suitable for double needles. Two additional Mütrans II systems can be fitted upon request for this purpose. The machines have been completely rebuilt. All bearings, shafts, and bushings have been checked and replaced if necessary. All swing arms have been inspected and replaced as needed. Configuration installed: 1st shaft position free (spacer block fitted) 2nd and 3rd shaft: swing arm 201 4th–6th shaft: swing arm 202 7th–9th shaft: swing arm 203 10th–12th shaft: swing arm 204 13th shaft: swing arm 205 All heald springs have been checked and replaced as required, with none being brittle, cracked, or defective. The electrical installation has been checked, the thread monitoring board has been inspected and repaired or replaced as necessary. All machines are painted in RAL 6021 Müller pale green. All covers are clean and undamaged. The machines are offered without Müdata. Four of the machines are also fitted with crawl (crawler) gear. All machines have been set up and tested. The machines are delivered without oil, weft threads, slats, reeds, needles, or chain links. Delivery is on Euro pallet, FOB Wuppertal.

Būklė: naudotas, Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, Naudota mašina Pagaminimo metai: 2007 Produkto informacija: Maks. pjovimo ilgis: 6 000 mm Maks. pjūklo disko skersmuo: 380 mm Pjovimo galvų pasukimo diapazonas nuo 0° iki 45°, be pakopų reguliuojamas tiek į kairę, tiek į dešinę. Tai leidžia pjauti tiek išorinius, tiek vidinius matmenis Fiksavimo taškai prie 15°, 30° ir 45° Hidropneumatinis pjūklo padavimas užtikrina tikslų pjūvį. Nuosekliai reguliuojamas su greitu padavimu Vertikalios ir horizontalios pneumatinės medžiagos tvirtinimo sistemos užtikrina optimalų profilio fiksavimą Elektronika E 111: Rankinis pjovimo ilgio nustatymas su skaitmeniniu ekranu E 111 Perjungimas nuo absoliučių matmenų į grandininius matmenis Ekrano esamos vertės išsaugojimas išjungus tinklą Techniniai duomenys: Mažiausias pjovimo ilgis: 520 mm Elektros prijungimas: 400 V, 3~, 50 Hz Galia vienam varikliui 3 kW Suslėgto oro prijungimas: 7 barai Itjdpsyu Hupofx Ab Nei Papildomai pridedama ši papildoma įranga: 1x stacionari ruošinio atrama

Būklė: naudotas, Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, Įranga: Tipinė plokštelė prieinama, AE 100 litre reactor agitator vessel, steel enamelled, manufacturer Estrella AG, Switzerland. Year of manufacture: 1995. Total capacity: 135 litres. Double jacket with 40 litre capacity. Permissible operating pressure vessel: -1/+6 bar. Permissible operating pressure double jacket: -1/+6 bar. Permissible operating temperature: -25/+200°C. Enamel colour: blue. Impeller agitator, mechanical seal. Handhole, sight glass lamp, drive 400 V EX, bottom drain valve, baffle with PT 100 temperature probe. Itsdpfx Abju Ibgts Noi If you have any questions or require further information, please do not hesitate to contact us. We will be happy to assist you. Cycron GmbH

Būklė: geras (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 6860 0007, Please let us know your offer price. Sale only within the European Union (EU), including Switzerland, Turkey, and the United Kingdom. Scope of delivery: Machine, loading system, conveyor belt, workpiece carrier Machine technical data: 5-axis grinding center including oval feed belt and loading gantry 12-position tool changer with HSK 63 Maximum travel X-axis: 500 mm Itsdpfx Aevbgiiob Noi Maximum travel Y-axis: 650 mm Maximum travel Z-axis: 650 mm Table size: 500 x 650 mm Profile detection Nordmann dressing spindle Oil supply via central factory supply

Būklė: naudotas, Svoris 60 kg Min. svoris 0,4 kg Itodpjxyturofx Ab Nei

Gamybos metai: 2018, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Machine Information: The machine comes from a metal construction company specializing in the production of aluminium windows, doors, and facades. It was purchased in 2018 to relieve several 5-axis machines, especially for the fabrication of aluminium entrance doors. Due to company restructuring, the machine was no longer used and became available. The machine has been thoroughly cleaned, inspected, and serviced at Weyand’s premisses. All worn parts have been replaced. Machining programs can be created either directly at the machine (eluCam) or via the included office software eluCad. Also included is the software option "Data Import Package" for ECW, NCW and V6 files, e.g. from LogiKal or Wictop. Machine Description: - Designed for efficient machining of aluminium, plastic and steel profiles - A-axis can be positioned continuously from -120° to +120° - Linear guides for clamp shifting Ijdpfoyr H Absx Ab Njti - Improved machining results through intelligent control technology - Fast positioning of the machining unit at up to 120 m/min thanks to dynamic servo drives - Tapping without compensating chuck - Automatic clamp recognition and positioning - Automatic tool changer - 4-axis control - No reference run for main axes required, thanks to absolute encoder systems - Collision avoidance through automatic clamp detection and positioning - Power-torque milling motor with closed-loop speed control for short spindle ramp-up and braking times - Certified, drive-integrated safety functions Low energy consumption due to intelligent control technology. Energy recovery via DC bus coupling of the axis drives with feedback and buffering of braking energy of the drives. Green-Line cooling unit for the control cabinet with reduced energy consumption - Windows operating system - 15" flat-screen monitor, USB ports and network connection - Simple and convenient program entry via eluCam at the operator terminal, even during machining - Remote maintenance via TCP/IP with internet access Equipment: - Operator protection cabin - Four horizontal pneumatic clamping devices - Material stop on the left - Minimum quantity lubrication - Handheld control device - Depth gauge Technical Data: - Max. machining length without end-face processing: 4,050 mm - X-axis travel: 4,176 mm, Vmax. 120 m/min - Y-axis travel: 1,040 mm, Vmax. 60 m/min - Z-axis travel: 540 mm, Vmax. 30 m/min - Machining direction 3+2 (top, rear, front) - Positioning accuracy +/- 0.1 mm - Milling spindle speed max. 20,000 rpm - Milling spindle power 7 kW, S1 (water-cooled) - Tool holder HSK-F63 - Automatic tool change - Twelve tool stations in the automatic magazine - Max. disc cutter diameter 120 mm - Max. tool length (from taper) 150 mm - Automatic clamp shifting - Basic clamp (with round guide) - Software eluCam - Compressed air connection >7 bar - Electrical connection 400 V, 50 Hz, 22 A - Air consumption per minute approx. 185 l (with spraying) Accessories (used): - Full enclosure SBZ122/7x (back wall + roof) - Complete HSK-F63 d16 L = 155 holder for disc cutter - Disc cutter D = 92x6.0mm Z = 14 d = 16, carbide-tipped - Right stop SBZ 122170171173 with 2nd clamping circuit, overlength processing - Various used tool holders and cutters - ESTA chip extraction eluCad - License for connection to eluCad - eluCad data import package for ECW, NCW and V6 files

Būklė: beveik kaip naujas (naudotas), Laser engraving, laser marking, laser welding, laser structuring, etc. 2x Ø 50 mm roof-side connections available Isdpferypcdsx Ab Neti Mobile storage device Very quiet operation Easy filter handling, modular design Control elements on front panel Powder-coated, robust housing Installation for extraction arms Volume flow control: stepless adjustment of suction power Particle filter contamination indicator: optical signaling SUB D9 interface: standard equipment, remote I/O, operation notification, 100% filter Dimensions W x D x H: approx. 1400 x 1200 x 2000 mm Weight: approx. 35 kg

Būklė: naudotas, Gamybos metai: 2023, veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, Mašina beveik nenaudota ir visiškai veikianti. Itsdeyfnd Hspfx Ab Noi

Būklė: naudotas, Gamybos metai: 2017, Smėliavimo kabina su ištraukimo įrenginiu Smėliavimo kabina: Gamintojas: SGT Strahlmaschinen AG Modelis: SX-100 / DK / 4P Iedpfxoyddufo Ab Neti Ištraukimo įrenginys: Gamintojas: Gläsner Įrenginio Nr.: 5V 3028 055 Įtampa: 400 V Dažnis: 50 Hz Galia: 2,2 kW Smėliavimo kabina parduodama kartu su ištraukimo įrenginiu. Atskirų komponentų įsigyti negalima. Galima apžiūra iš anksto susitarus.