Cormak Stół Krzyżowy 185X100 Mm Kp201 pirkti naudotą (80 480)

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2025, Cantilever racking used: Bolt-together system in hot-dip galvanized design Scope of delivery: Ijdpfxjmhh Dtj Aaueia 4 rack uprights, height 4,160 mm with base section, 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm rack length (upright spacing 1,300 mm) Fastening materials (bolts, nuts, and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Spare parts can be reordered and extensions are possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Robust steel construction made of IPE profiles (bolt-together system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 bolted cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm upright spacing - Rack length = 4,000 mm - Including fastening materials (without floor anchors) - With assembly instructions and load capacity signs C4 according to DIN standards - Expert technical advice by phone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight service with advance notification before delivery. Materials are packaged sensibly to enable easy unloading. When installed outdoors, load capacities are reduced due to wind and snow loads. The foundation must be made of concrete, level, suitable for anchoring, and capable of supporting the applied loads. The client is responsible for checking and ensuring ground conditions, load-bearing capacity, and any necessary official permits. The rack uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the trade association, it is recommended that the rack uprights have an overhang of at least 500 mm above the top storage level.

Būklė: labai geros būklės (naudotas), Parduodama aukštos kokybės frezavimo galvutė, garsaus Walter prekių ženklo Xtra-tec® serija, skirta tiksliam metalo šiurkščiam ir pusiau baigiamajam apdirbimui. Aukščiausios kokybės pramoninis įrankis, idealiai tinkantis CNC centrams ir įprastinėms frezavimo staklėms. • Darbinis skersmuo: Ø80 mm • Modelis: F4033.B27.080.Z07.06 • Tvirtinimas: SK40 / ISO40 • Sistema: Xtra-tec® • Plokštelių lizdų skaičius: 7 • Aukšta gamybos kokybė – vokiškas Walter tikslumas • Naudojimas: paviršių frezavimui, plieno, ketaus, lydinių apdirbimui • Būklė: naudota, labai gera techninė būklė, paruošta darbui Galvutė užtikrina puikų našumą ir ilgą tarnavimo laiką – idealiai tinka pramoninėms, dirbtuvių bei gamybinėms reikmėms. Ijdpoxlgniefx Aausia

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The CORMAK SH-30S PRECISA spindle moulder, available in either 400V or 230V versions, is an efficient and precise woodworking machine designed for professional timber processing in industrial facilities, carpenter’s shops, and craft workshops. Its robust construction, interchangeable spindle, and wide spindle speed range ensure top performance when machining straight elements and complex shapes. Key machine features: - Stable cast iron table construction ensures vibration damping and perfect sliding of the workpiece. - Spindle speed range: 1400 / 4000 / 6000 / 9000 rpm enables processing of various types of wood and wood-based materials. - Reinforced and balanced spindle guarantees quiet and precise operation without vibrations. - Height adjustment with scale allows for accurate setup of machining parameters. - Comprehensive standard equipment included – tilting fence, workpiece holders, and assembly tools. - Complies with all health & safety, technical documentation and CE standards – ensuring work safety and regulatory compliance. Construction and technology: The structure of the CORMAK SH-30S PRECISA spindle moulder is based on a high-grade cast iron body, which effectively eliminates unwanted vibrations during operation. The working table, sized at 620 x 510 mm, is precisely ground to ensure uniform workpiece glide. The 2.2 kW (400V) motor provides sufficient power even for intensive use. With a spindle stroke of 100 mm and a maximum tool clamping height of 105 mm, the machine easily handles a wide range of milling operations. Precision and performance: The CORMAK SH-30S PRECISA spindle moulder combines high-quality craftsmanship with functionality. Multi-stage spindle speed control allows optimal parameter adjustment to the type of material and tool shape. Precision guides and stops enable accurate reference point setting, ensuring repeatability and high-quality end results. Applications: The CORMAK SH-30S PRECISA model is suitable for: - professional carpentry and production plants, - furniture makers and craft workshops, - production of decorative mouldings, grooves, splines, tenons and finger joints, - machining the edges of straight and curved elements. Standard Equipment: - 60° tilting fence (left/right) - Workpiece holder - Workpiece stop - Non-slip feet - Assembly tools Optional Equipment: Interchangeable spindle with ER20 collet allows for quick tool changeover, adapting the machine for various tooling – price: 700 PLN net Technical Specifications CORMAK SH-30S PRECISA spindle moulder – cutting angles Motor power S1: 2.2 kW Voltage: 400V or 230V Table dimensions: 620 x 510 mm Table height: 860 mm Extraction port diameter: 100 mm Spindle stroke: 100 mm Max. clamping height: 105 mm Table aperture: 160 mm Max. tool diameter under the table: 150 mm Spindle speed: 1400 / 4000 / 6000 / 9000 rpm Spindle diameter: 30 mm Gross weight: 126 kg Overall dimensions: 640 x 660 x 1250 mm Ijdevugf Dspfx Aauoia

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, The CORMAK DC2200 is an efficient and robust cyclone dust extractor designed for effective air filtration in woodworking shops, furniture manufacturing plants, and metalworking facilities. Featuring a cyclone separator, a powerful centrifugal fan, and a modern filtration system, this unit ensures efficient dust particle separation and sustained high performance over prolonged operation. Main advantages of the CORMAK DC2200: - High extraction capacity – up to 2,800 m³/h – enables efficient removal of dust and shavings even from multiple workstations simultaneously - Cyclone separator – separates larger particles before they reach the filter, prolonging filter service life - Powerful 2.2 kW motor (2200 W / 50 Hz) – guarantees stable and reliable operation in continuous duty - Large 151-litre metal collection bin – ensures convenient and safe collection of waste - 4.8 m² filter surface area – ensures highly effective fine dust filtration - Compact, mobile design – sturdy frame with transport castors for easy movement - Quiet operation – optimised fan minimises noise without sacrificing performance Construction and Technology The CORMAK DC2200 is fitted with a centrifugal fan with a 365 mm impeller generating maximum static pressure of 2,220 Pa. This allows the unit to efficiently extract air over long duct runs and service several workstations. Three suction ports (3 × Ø100 mm) and a main inlet (Ø200 mm) offer flexible system configuration to fit the layout of your production area. The implemented cyclone system effectively separates heavier particles upon entry, allowing only filtered air to reach the collection bin. The cylindrical cartridge filter (Ø370 × 612 mm) maintains consistent airflow even under intensive use. Performance and Ergonomics The DC2200 extractor is engineered for daily use in small and medium-sized enterprises. The 151-litre collection tank (Ø620 × 570 mm) allows for extended operating cycles without frequent emptying. Compact dimensions of 1320 × 900 × 1840 mm and a net weight of 136 kg allow seamless integration into any workspace. Iiodexrdhaepfx Aauea Application The CORMAK DC2200 is ideal for use in: - Woodworking and furniture manufacturing workshops - Sawmills and timber processing facilities - Model makers’ and metalworking shops - Composite and MDF component production Standard Equipment Includes: - Cyclone separator - High-surface-area cylindrical filter - 151-litre metal dust and chip container - Transport wheels (casters) - Suction ports: Ø200 mm and 3 × Ø100 mm Technical Specifications Motor power: 2.2 kW / 50 Hz Capacity (without filter): 3,900 m³/h Maximum static pressure: 2,220 Pa Fan impeller diameter: 365 mm Inlet diameter: 1 × Ø200 mm / 3 × Ø100 mm Tank capacity: 151 L Tank dimensions: Ø620 × 570 mm Filter area: 4.8 m² Filter size: Ø370 × 612 mm Overall dimensions (LxWxH): 1320 × 900 × 1840 mm Weight (net / gross): 136 / 170 kg

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The HRT/D 3 m Roller Conveyor is a high-quality roller conveyor designed for demanding use in industrial plants, metal workshops, and machining centers. Thanks to its segmented construction, divided into two sections, this model offers not only high rigidity and operational stability, but also convenient transport and rapid assembly, even in hard-to-reach areas. It's an ideal solution for demanding users who value efficiency, durability, and flexible configuration. Key advantages of the machine: - 10 steel rollers, size 60 × 360 mm – optimal material stabilization during conveying - Segmented design – easier handling, assembly, and transport without compromising rigidity - Load capacity up to 900 kg – suitable for heavy structural components, shafts, profiles, and pipes - Continuously adjustable height from 650–1100 mm – compatible with various machining machines - Modular construction – possible extension and connection with other roller conveyors - Reinforced crossbars in the legs – improved resistance to vibrations and dynamic loads Construction and Technology: The HRT/D 3 m model features a robust industrial build based on thick-walled steel box sections. The segmented structure, divided into two connected sections, simplifies logistics and provides greater rigidity compared to one-piece designs. Steel rollers mounted on ball bearings ensure low rolling resistance and thus smooth material transfer regardless of its shape. Precision and Work Efficiency: Proper material feed to a saw, cutter, or other processing machine is crucial for technological process quality and accuracy. Thanks to its adjustable height and high load capacity, the HRT/D roller conveyor eliminates vibrations, material twisting, and positioning errors. This not only extends the life of cutting tools but also reduces setup time and streamlines the entire production cycle. Application: The HRT/D 3 m roller conveyor is used in the following environments: - Steel construction and prefabrication plants - Metalworking shops and metal component manufacturers - Profile and pipe cutting centers - Machinery and tool industry Its potential for extension and integration with other infeed systems allows this device to fit nearly any technological layout. Standard equipment: - 10 steel rollers, diameter 60 mm - Steel frame divided into two segments - Adjustable legs, height range 650–1100 mm - Cross-structure reinforcements Iodpsymnx Hefx Aaujia Technical specifications: Roller diameter: 60 mm Roller length: 360 mm Number of rollers: 10 Conveyor length: 3000 mm Conveyor width: 450 mm Height range: 650–1100 mm Maximum load capacity: 900 kg Weight: 50 kg

Būklė: naujas, Gamybos metai: 2026, Magnetic coolant separator is an industrial device designed for continuous cleaning of coolants and oil-based substances from ferromagnetic particles generated during machining processes. Thanks to its automatic, continuous operation, it effectively removes chips and fine metal particles from the flowing medium, thus reducing machine wear and minimizing downtime related to coolant replacement or filtration. Magnetic Separator – Key Benefits in Coolant Cleanliness Maintenance Construction and Operating Technology The separator is engineered for the mechanical and maintenance-free separation of metallic contaminants from process media. Its core component is a stainless steel magnetic drum which, during rotation, attracts ferromagnetic particles from the passing coolant. The collected contaminants are then removed and conveyed outside the working area. Particle removal is managed by a shaft system: • Magnetic shaft – responsible for capturing and holding metallic particulates during separation, • Rubber-coated pressure shaft – stabilizes the collection of contaminants and supports their transfer into the waste container. The separator's design includes a tank ensuring controlled medium flow through the separation zone. This setup allows the unit to operate in a continuous cycle, reliably removing contaminants without operator intervention. Precision and Performance in Production Environments With a capacity of up to 25 l/min, the device enables efficient operation in standard coolant systems commonly found in production workshops. Magnetic separation reduces metal debris within the circuit, which in practice leads to: • Improved stability of cooling and lubrication parameters, • Lower risk of scratches and reduced surface quality degradation during machining, • Extended service life of coolant and circulation system components, • Enhanced operational predictability during continuous processes. Application of the Magnetic Separator The magnetic separator is suitable wherever metal shavings and ferromagnetic particles are generated in coolant-lubricant media. This device is particularly recommended for: • CNC machining halls and workshops, • Production lines with metal cutting operations, • Grinding stations using water- or oil-based coolants, • Coolant circulation systems requiring continuous filtration. Standard Equipment • Magnetic separator with stainless steel magnetic drum • Rubber-coated pressure shaft • Working tank Iisdpfsycc Rpsx Aauea • Electric drive Optional Equipment • Waste container adapted to the production workstation • Connection extensions for integration with existing coolant systems Technical Specifications WIDTH OF PRESSURE SHAFT (RUBBER-COATED): 140 mm DIAMETER OF PRESSURE SHAFT (RUBBER-COATED): 65 mm WIDTH OF MAGNETIC SHAFT: 140 mm DIAMETER OF MAGNETIC SHAFT: 110 mm INLET CONNECTION: 50 mm OUTLET DIAMETER: 53 mm MOTOR POWER: 0.25 kW CAPACITY: up to 25 l/min WEIGHT: 35 kg

Būklė: naujas, Gamybos metai: 2026, A radial turbine is installed in a vacuum cabin on the clean air side in special soundproof cabins. The next-generation reinforced turbine and the large filtration area operate more efficiently and effectively, contributing to energy savings. Advantages: - The DCV 7500 extraction unit represents another milestone in the production of high-performance sawdust and dust extraction units, designed to maintain consistent extraction parameters throughout the work cycle. - Durable, robust construction ensures quiet and vibration-free absorber operation. - Proven reliability, confirmed by manufacturing plants handling large orders on a daily basis. - Compact footprint, yet capable of extracting large quantities of dust and chips. - Large-diameter (280 mm) metal suction nozzle provides excellent airflow. - Powerful and quiet fan guarantees high negative pressure performance. - Special blade design makes the unit more efficient and effective, additionally supporting energy savings. - Very high airtightness of the entire suction system guarantees the best air quality within the facility and eliminates heat loss during the heating season. - Large filter surface area. - Possibility to build an overhead system and connect several machines operating simultaneously with the DCV 7500E extraction units. - Quick replacement of waste collection plastic bags, designed to maintain 99.99% hermeticity of the system. - Low-noise, high-performance thanks to a balanced metal impeller. - Ensures perfection and cleanliness at the workstation, which directly translates to the quality of your products. - Perfectly compatible with machines such as grinders, edge banders, panel saws, etc. - Guaranteed high-quality filtration! - Polyester filter retains dust particles down to 5 microns; to filter even smaller particles, use a HEPA-type filter. Iisdpfsvzqtxox Aausa - Not intended for use in explosive atmospheres. - Designed for dust, chips, and sawdust extraction in woodworking industry (not suitable for wet material, e.g. wet sawdust). Technical Specifications: CONTINUOUS DUTY MOTOR POWER S1: 5.5 kW / 400 V, 50 Hz SPEED: 2900 rpm EXTRACTION CAPACITY: 7,500 m³/h SUCTION NOZZLE DIAMETER: 280 mm SUCTION VELOCITY: 28–32 m/s FILTER AREA: 18 m² FILTER MATERIAL: Polyester, 5 microns NUMBER OF FILTERS: 35 DIMENSIONS (L x W x H): 1040 × 625 × 2150 mm WEIGHT: 306 kg Manufacturer: Cormak

Būklė: labai geros būklės (naudotas), Profesionali frezavimo ir gręžimo laikiklių rinkinys su SK40 / ISO40 kūgiu pagal DIN 69871 A standartą. Komplekte apie 25 paruoštų naudoti įrankių su sumontuotomis frezomis ir grąžtais. Įrankių skersmens diapazonas: nuo Ø4 mm iki Ø12 mm – idealus rinkinys serijinei gamybai. Laikiklių ilgis: 50 mm – kompaktiški ir preciziški, idealiai tinka CNC apdirbimo centrams. Rinkinį sudaro įvairių tipų įrankiai: cilindriniai galiniai frezai, sriegikliai, išplėstuvai, VHM grąžtai, nuožulninimo įrankiai. Dalies įrankių paviršius padengtas – tinka plieno, nerūdijančio plieno, aliuminio ir ketaus apdirbimui. Visi laikikliai naudoti, techniškai geros būklės – patikrinti ir paruošti naudoti iš karto. Žinomų prekės ženklų gaminiai: ZÜRN Vokietija ir Orion. Galima įsigyti visą rinkinį arba atskirus vienetus. Iedpfx Aaexldr Eeusia

Būklė: labai geros būklės (naudotas), Parduodamas 3 profesionalių AMP / TYCO Electronics rankinių užspaudimo įrankių rinkinys, skirtas pramoniniam, automobilių ir dirbtuvių naudojimui. Originalūs įrankiai su EDB Electronic technine dokumentacija – kiekvienas skirtas tam tikram laidų ir kontaktų diapazonui. Isdpfx Aasw Svapjueia

Būklė: labai geros būklės (naudotas), Parduodu naudotą Klauke K18 presą. Profesionalus mechaninis presas ENERGOTYTAN KLAUKE K18 sukurtas sunkiausiems elektros instaliacijos darbams. Stabili konstrukcija, tinkama naudoti tiek viduje, tiek lauke, užtikrina patikimą darbą Ijdsw Slkdspfx Aaueia

Būklė: labai geros būklės (naudotas), Parduodamas podtrzymak (steady rest) tekinimo staklėms. Profesionali dirbtuvių įranga stabiliai ilgų ir sunkių ruošinių atramai apdirbimo metu. Tvirta ketaus konstrukcija – maksimali standumas ir ilgaamžiškumas. Darbinė anga apie 150 mm (matuota slankmačiu). Atidaromas rėmas – greitas ir patogus ruošinio tvirtinimas. Reguliuojami kaiščiai su slydimo antgaliais. Tvirtinimas prie tekinimo staklių stalo per pagrindą su anga. Skirtas velenų, vamzdžių, strypų ir kitų ilgų detalių tekinimui, kuriems reikalinga atrama apdirbimo metu. Iiodpfxjw Sfpyj Aausa

Būklė: labai geros būklės (naudotas), Pagaminta iš sunkaus ketaus – didelis standumas ir patvarumas. Darbinė anga apie 120 mm (matuota slankmačiu). Reguliuojami kaiščiai su besisukančiais galais. Tvirtinimas pagrindo skylėmis – saugus ir stabilus pritvirtinimas. Labai gera būklė, visiškai veikiantis ir paruoštas naudoti. Puikiai tinka velenų, vamzdžių, strypų ir kitų detalių, kurioms reikalinga atrama tekinimo metu, apdirbimui. Iodpow Sfptjfx Aauoia

Būklė: labai geros būklės (naudotas), Parduodamas CNC rotacinis stalas žinomo gamintojo Fadal Engineering (JAV), modelis VH65. Profesionali 4-ašis skirta apdirbimo centrams, ypač Fadal VMC, tačiau galima integruoti ir su kitomis CNC staklėmis naudojant tinkamą valdiklį. Techniniai duomenys: • Modelis: VH65 • Disko skersmuo: 165 mm (6,5”) • Perdavimo santykis: 90:1 • Pneumatiniai stabdžiai (M60 ON / M61 OFF) • Pramoninis daugiapinis jungtis • Serijos nr.: 4630298 Būklė: naudotas, mechaniškai tvarkingas, normalūs darbo požymiai. Tvirta ir sunki konstrukcija – idealiai tinka preciziškai 4 ašių apdirbimui. Isdpfx Ajw R St Nsausia

Būklė: labai geros būklės (naudotas), Parduodu sunkią tekinimo staklių užtvarą (koniką) su rankiniu pinolės padavimu ir fiksavimu. Pagaminta iš ketaus, labai tvirtos konstrukcijos – idealiai tinka didelėms konvencinėms tekinimo staklėms. Būklė matoma nuotraukose – pinolė juda, pagrinde laisvumo nėra, vedančių paviršių būklė gera. Tinka modernizavimui arba kaip bazė staklių atstatymui. Parametrai: • Pinolės skersmuo: 100 mm • Pinolės išstūmimo ilgis: apie 320 mm • Įvorės lizdo skersmuo: 44 mm • Rankinis valdymas: rankena + fiksavimo svirtis • Pagrindas su varžtiniu tvirtinimu Iodpfx Aaew Rdl Reusia • Svoris: apie 70–90 kg Galima siųsti ant paletės arba atsiimti asmeniškai.

Būklė: labai geros būklės (naudotas), Profesjonalus išorinis mikrometras, pagamintas žinomo gamintojo Mahr, skirtas tiksliems matavimams pramonėje, dirbtuvėse ir laboratorijose. Prietaisas pasižymi dideliu tikslumu bei tvirta konstrukcija, o didelis LCD ekranas leidžia greitai ir patogiai matyti rezultatus. Matavimo sritis: 25–50 mm / 1–2” Skiriamoji geba: 0,001 mm (1 µm) Funkcijos: ZERO, ABS, REL, TOL Apsaugos klasė: IP65 – atsparus dulkėms ir aptaškymui Maitinimas: CR2032 baterija (3 V) Ergonomiška, tiksli konstrukcija iš grūdinto plieno Iedexl Rf Sopfx Aaujia Aiškus LCD ekranas Katalogo numeris: 4157042 Gamintojas: Mahr GmbH – Vokietija Komplektacija: - Skaitmeninis mikrometras Mahr Micromar 40 EWR-S - Etaloninis matavimui - Reguliavimo raktas - Dokumentacija ir naudojimo instrukcija - Originalus transportavimo lagaminas Prietaiso būklė: labai gera – visiškai techniškai tvarkingas ir paruoštas naudojimui. Puikus pasirinkimas pramonės įmonėms, tiksliosioms dirbtuvėms ir matavimo laboratorijoms.

Būklė: labai geros būklės (naudotas), Profesionalus skaitmeninis mikrometras iš žinomo gamintojo Mahr – modelis Micromar 40 EWR(i) – skirtas itin tiksliems matavimams iki 0,001 mm tikslumu. Prietaisas IP65 versijoje, atsparus dulkėms ir vandeniui, puikiai tinkamas metrologijai, kokybės kontrolei ir pramoninėms dirbtuvėms. Matavimo diapazonas: 100 – 125 mm Tikslumas: 0,001 mm Skaitmeninis rodmuo dideliame, lengvai skaitomame LCD ekrane Iedpfx Aajxl Rgieueia Apsaugos klasė: IP65 – atsparumas dulkėms ir taškymui „ABS“ ir „Hold“ funkcijos – greitam matavimo sustabdymui ir nulio funkcijai Aukšto standumo korpusas, ergonomiška rankena Komplekte originali dėžutė, sertifikatas, naudojimo instrukcija ir 100 mm matavimo etalonas Būklė: praktiškai naujas / naudotas tik testavimui

Būklė: labai geros būklės (naudotas), Tiksli vokiečių gamintojo Mahr mikrometro „Marameter M“ modelis, skirtas labai tiksliam išorinių skersmenų matavimui 0–40 mm diapazone. Prietaisas labai geros būklės, visiškai veikiantis, laikomas originaliame mediniame apsauginiame dėkle. Specifikacija: • Matavimo diapazonas: 0 – 40 mm • Tipas: Marameter M • Gamintojas: Mahr (Vokietija) • Katalogo numeris: 3206064 • Paskirtis: tikslus išorinių skersmenų / velenų / cilindrinių detalių matavimas • Metalinis korpusas, atsparus nusidėvėjimui • Svirtis su keičiama matavimo antgalių sistema • Aukštas matavimo stabilumas ir pakartojamumas • Komplekte originali medinė dėžutė Būklė: • Naudotas, labai gerai išsilaikęs • Paskutinė kalibracija: 2023 • Paruoštas naudoti matavimų patalpoje ar laboratorijoje Iisdpfx Aoxmlgtoausa

Būklė: naujas, Gamybos metai: 2026, The CORMAK PS315PRO-2000 format saw with scoring unit is a robust, precise, and versatile panel saw, designed for woodworking shops, furniture manufacturing, and facilities processing wood-based materials. Thanks to its compact 2000 mm table length, heavy-duty guides, and reliable scoring system, this model excels in serial cutting of MDF, HDF, plywood, and solid wood panels. Key Features - Format saw with scoring unit – dual-blade system ensures chip-free cutting, even in laminated or single-sided foiled materials. - Stable and durable construction – solid frame, cast iron tables, and steel guides guarantee long service life and resistance to deformation. - Wide adjustment range – blade tilt from 90° to 45° and adjustable main blade height allow for a wide variety of angled and depth cuts. - High rotational speed – 5800 rpm of the main blade delivers clean, fast cuts without burning the material. - Extraction compatibility – integrated dust extraction port enables effective connection to a dust collection system. - Safety and ergonomics – blade guard, side fence with scale, and safety features improve both operator comfort and workplace safety. Design and Technology The PS315PRO-2000 panel saw is engineered for maximum stability and reliability. Its rigid steel frame provides the core structure, while the main working surfaces are made from precision-ground cast iron. The main saw blade (⌀ 315 mm) works in tandem with the scoring blade (⌀ 90 mm), eliminating chipping risk. The machine is fitted with two independent drives, ensuring both cutting systems can operate individually. Material feed is supported by a sliding carriage with a bearing guide, and clear length and angle scales facilitate fast and accurate cutting parameter adjustments. Precision and Performance The CORMAK PS315PRO-2000 panel saw has been optimized for processing accuracy and ease of operation. With blade speeds of 5800 rpm (main blade) and 4000 rpm (scoring blade), cuts are clean, burr-free, and minimal further finishing is required. Adjustable blade tilt enables precise angled cuts without repositioning the material. Standard Equipment - Main saw blade - Scoring blade - 2000 mm panel table with support - Longitudinal and crosscut fence - Miter gauge - Blade guard with extraction port - Table extension - Eccentric clamp - Angle tilt indicator - User manual (DTR) in Polish - CE Declaration of Conformity Optional Equipment - Additional saw blades - Chip extraction system Technical Specifications Isdpfx Aasylxhvsujia Table length [mm]: 2000 Cutting width [mm]: 1220 Blade tilt [°]: 45 Cutting height at 45° [mm]: 80 Cutting height at 90° [mm]: 100 Max main blade size [mm]: 315 Max scoring blade size [mm]: 100 Main saw rotation speed [rpm]: 5800 Scoring saw rotation speed [rpm]: 4000 Motor power [kW]: 3.0 Power supply: 400V Extraction port diameter [mm]: 100 Weight [kg]: 350 Warranty [months]: 12 User manual (DTR): YES CE Declaration: YES

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The most powerful stationary extractor on the market, equipped with a 2.8 kW motor, high negative pressure, and a capacity of 5,000 m³/h. It is ideal for use in both small and large carpentry workshops. The mobile base, fitted with wheels, ensures easy maneuverability. The metal impeller guarantees quiet and trouble-free operation of the extractor. Iiodpfx Aaovu Aqpjuea The FM500 dust extractor is a highly efficient machine with strong negative pressure. Its robust metal construction and balanced impeller make it indispensable in any woodworking facility. The felt filter bags used in this extractor allow filtration of dust particles as small as five microns. The integrated manifold enables connection of up to four machines simultaneously, with maximum performance achieved when three machines are connected. Advantages of the FM500 extractor: - Balanced metal impeller - Quick-fit FELT dust collection bag - Mobile base on castors - Robust, all-metal construction - Bag support arms - High negative pressure - Powerful three-phase motor - Capability to connect up to four machines - Constant suction power Technical specifications: Motor power S1: 2.8 kW Power supply: 400 V / 50 Hz Motor speed: 2,950 rpm Overall dimensions: 1,525 x 560 x 2,460 mm Airflow capacity: 5,000 m³/h Negative pressure: up to 2,500 Pa Air intake speed: up to 31 m/s Filter bags: felt (2nd filtration stage) Waste bag volume: 480 L Nozzle diameter: 200 mm / 4 x (ø 100 mm) Weight: 64 kg

Būklė: naujas, Gamybos metai: 2026, Horizontal band saw with a swiveling arm for cutting metals, capable of making cuts in a plane perpendicular to the axis of the material and at any angle from 0 to 60º. Material can be fed manually or with any mechanical feeder, paired with automatic tool feed. The saw blade guides feature dedicated carbide inserts and bearings, which greatly influence blade guidance, blade life, cutting straightness, precision, and cut quality. The machine arm is made from profiled CAST IRON. The control panel is located by the arm. Power from the electric motor is transmitted to the band drive wheel via a worm gear motor. The band saw blade is tensioned on two cast iron wheels by a manual tensioner and guided by an adjustable rolling and linear carbide guide assembly. Inside, there is a separate coolant tank with an electric pump. The rate of arm descent (cutting speed) is regulated by a hydraulic cylinder. Feed speed is controlled via the control panel. Two blade speeds are available: 36 and 72 m/min. In the resting position of the arm (after the cutting process), the saw blade drive is automatically switched off. Safety is ensured by blade guards and microswitches that stop the motor after the cutting cycle or when any guard is opened; additional protection is provided by automatic shutdown of the band saw in the event of blade breakage. Technical Data Band Saw Dimensions 2455×27×0.9 mm Blade Tensioning Mechanical (manual) Blade Speed 36, 72 m/min Feed Speed 0–50 m/min (stepless adjustment) Arm Descent Control Stepless – hydraulic cylinder Vise Base Height 900 mm Power Supply 3-phase 400 V Motor Power 1.1 kW Net/Gross Weight 220 kg / 284 kg Warranty 12 months Manual yes CE Declaration yes Cutting Angles and Capacities: 0º ø230 260×150 225×225 45º ø165 180×130 165×165 60º ø105 100×90 Iijdpfx Aovuf S Noausa 110×110 *Please note: the machine is supplied by default without a CEE connector, as there are many different types. If you would like one included with your unit, please contact the seller prior to purchase or at the time of ordering.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2026, FM300SN is an advanced industrial transport fan designed for the extraction of sawdust, wood chips, and wood dust in demanding factory conditions. With a power rating of 2.2 kW and an extraction capacity of 3900 m³/h, this unit serves as an efficient sawdust blower for dust extraction systems, providing effective filtration and air purification directly at the source of contamination. Reliability, high performance, and compatibility with various woodworking machinery make it an ideal choice for professional wood processing facilities. Key machine features - 2.2 kW motor – designed for continuous, intensive operation - High extraction performance of 3900 m³/h – effective removal of sawdust, chips, and dust - Impeller speed 2850 rpm – optimal airflow with stable operation - Universal suction nozzles – 1×150 mm and 3×100 mm for simultaneous connection of multiple machines - Steel construction – resistant to mechanical damage, suitable for industrial environments Design and technology The FM300SN is based on a welded construction made of thick, powder-coated steel, ensuring resistance to impacts, vibrations, and heavy use. The aluminum impeller, mounted directly on the motor shaft, provides high efficiency and minimal energy loss. The fan is configured for three-phase 400 V / 50 Hz operation, allowing stable use in industrial plants without the risk of system overload. The suction nozzle system, featuring diameters of 3×100 mm and 1×150 mm, allows for the simultaneous connection of several machines or the use of reducers depending on the requirements of the extraction system. Precision and work efficiency FM300SN stands out for its high efficiency in conveying sawdust and dust, even under heavy contamination. Optimized aerodynamic parameters ensure constant airflow, preventing clogs in the duct system. As a result, this dust extraction fan not only ensures a clean working environment but also extends the service life of connected machines by minimizing their exposure to process dust. Application The FM300SN model is suitable wherever efficient extraction systems for sawdust and chips are required during woodworking operations. It is especially recommended for: - Carpentry workshops - Furniture manufacturing plants - Production of panels and solid wood components - Central dust extraction systems in production halls Compatible with machines such as: - Planers and jointers - Thicknessers - Spindle moulders - Panel saws - Edge banders Standard equipment - Powder-coated steel housing - Three-phase 400 V motor - Direct drive aluminum impeller - Suction nozzles: 1×150 mm and 3×100 mm Optional equipment - Flexible hoses Ø100 mm, Ø120 mm, and Ø150 mm - Filter bags Technical data: Iiodpfx Aevu Amkoauoa Motor power: 2.2 kW Speed: 2950 rpm Extraction capacity: 3900 m³/h Suction nozzle diameter: 150 mm / 3x 100 mm Outlet nozzle diameter: 120 mm Voltage / frequency: 400 V / 50 Hz Dimensions (L x W x H): 440 x 430 x 450 mm Weight: 30 kg

Gamybos metai: 2026, būklė: naujas, A refrigeration compressed air dryer is designed to lower the temperature of compressed air and remove water and oil particles contained in the airflow. Refrigeration dryers are essential in applications where humid air could cause corrosion, contamination, or damage to tools, machines, or products. By removing moisture, the dryer increases the reliability and service life of compressed air systems. The refrigeration dryer has been engineered for maximum efficiency and durability. The main structural components include: 1. Air-to-air heat exchanger Iiedpfxsmt Dcxe Aauea In the first stage of the process, the inlet air passes through a heat exchanger, where it is pre-cooled by the colder air leaving the evaporator. By utilizing a counterflow configuration, heat recovery increases the overall system’s energy efficiency. 2. Refrigeration circuit evaporator In the second stage, the compressed air enters the evaporator, where it is cooled down to the dew point temperature of 3°C. This results in the condensation of contained water vapor and oil particles. 3. Condensate separator After cooling, the gas and condensate mixture enters an efficient separator, where the condensate is separated and automatically discharged from the unit. 4. Fan control system The variable-speed fan technology enables intelligent adjustment of the cooling intensity to actual demand, reducing energy consumption and increasing component lifespan. Technical specifications Inlet/outlet pipe diameter (BSP): 1 1/2" Max. working pressure: 10 bar Max. inlet air temperature: ≤ 38°C Dew point temperature: 3°C Capacity: 7,000 l/min Power: 1.37 kW Supply voltage: 230 V Dimensions (L x W x H): 1000 x 550 x 920 mm Weight: 95 kg Type and amount of refrigerant: R410a, 900 g

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, The tank is used in pneumatic control systems for various devices and serves to dampen compressed air pulsations within the system, ensure optimal compressor operation, partially remove moisture and oil from compressed air, and create an air reserve. Technical specification of the 1000L pressure vessel The compressed air pressure vessel is a cylindrical pressure device comprised of two ellipsoidal end caps, a shell with nozzles, and valves. Its primary function is to dampen pulsations in the compressed air system, contributing to optimal compressor operation and assisting in the removal of moisture and oil from compressed air. High-quality pressure vessels are especially suitable for demanding working conditions. Our 1000-liter, 11 bar pressure vessel is a robust and capacious unit, ideal for storing compressed air and other gases under high pressure. It is engineered to withstand high pressures and ensure safe gas storage. This tank is used in a variety of sectors, including industry, construction, automotive, and home workshops. It can be easily connected to an air compressor or other compressed air generation equipment, providing a reliable gas source for production processes and utility applications. With its 1000-liter capacity, this vessel allows for longer operating periods without frequent refilling. The 11 bar working pressure ensures the vessel can safely contain gas at high pressure, which is particularly advantageous for power-intensive applications. Our 11 bar, 1000L pressure vessel is manufactured from high-quality materials, guaranteeing durability and safety. It is equipped with appropriate valves and safety features to prevent leaks and maintain safe pressure levels. Furthermore, our tank is supplied with complete documentation, technical passports, certificates, and attestations, including information about materials used in the manufacturing process. It has undergone inspection by a Notified Body of the Office of Technical Inspection and is marked with a nameplate containing the CE mark and the Notified Body number (UDT). In summary, the 1000-liter, 11 bar pressure vessel is a reliable unit that enables the storage of compressed air or other gases under high pressure. Its versatility makes it a dependable gas source for a wide range of industrial and utility applications. Iisdjv Axzmopfx Aauea Our offer includes a broad selection of pressure vessels with various capacities, making it easy to match the model to specific installation requirements. Our tanks are made from high-strength, pressure-resistant steel and coated with specially prepared paint both inside and outside. Vertical and horizontal installation models are available for flexible integration into varied settings. Our tanks are also used in pneumatic control systems for various devices. Technical data: Weight (kg): 230.00 Connections: 8 Connection sizes: 1/2", 2" Dimensions: 222.7 x 85 cm Tank capacity (l): 1000 Working pressure (bar): 11 Wall thickness (mm): 5 Diameter (mm): Ø 850 Height (mm): 2250 Manufacturer: Cormak

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, 500 L COMPRESSED AIR TANK – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS Key Advantages of the 500 L Pressure Vessel - Professional pressure-rated design – made from high-grade 4 mm thick steel, resistant to both pressure and corrosion. - UDT certification and CE marking – compliant with European safety and quality standards. Iiodsxbzbpjpfx Aausa - Working pressure up to 11 bar – suitable for most pneumatic systems, including those with increased demands. - High capacity – 500 liters – ensures stable supply for pneumatic installations and reduces compressor start-up frequency. - Multi-connection inlet system – 6 ports with diameters of 1.1/4", 2", and 1/2" provide flexible integration with various installations. - Superior finish – durable anti-corrosive coating applied both inside and outside the tank. - Universal installation orientation – vertical construction optimizes space usage within the facility. Construction and Technology – Robust Design for Demanding Applications This compressed air vessel has been engineered for intensive use in industrial environments. The body is manufactured from structural steel with a wall thickness of 4 mm, ensuring resistance to pressures up to 11 bar and guaranteeing long service life. All welds undergo rigorous quality checks, while the tank surfaces are protected with anti-corrosive paint resistant to chemical and environmental factors. The vessel is fitted with a nameplate featuring the CE mark and a UDT notified body number, confirming its approval for use in both Polish and European markets. The set includes complete technical documentation, a pressure vessel passport, and material certificates. Standard Equipment - Connection ports: 6 pcs – diameters 1.1/4", 2", 1/2" - Nameplate with CE mark - UDT notified body number - Full technical documentation and pressure vessel passport - Internal and external anti-corrosive coating

Būklė: naujas, Gamybos metai: 2026, The M900 Mobile Machine Base is an innovative solution designed for the industrial sector. This portable and user-friendly base allows for the safe and stable placement of a wide variety of machines and devices. Thanks to its robust construction and high-quality materials, the M900 mobile machine base is extremely durable and resistant to damage. Product Features: This base has been engineered to maximize operational functionality and user convenience. It offers adjustable dimensions ranging from 620x485mm to 870x735mm, a load capacity of up to 300kg, and a self-weight of only 10kg—making it suitable for different types of machinery. For increased stability and safety, the support feet are equipped with elastic cushions to protect machines from vibrations. The M900 mobile machine base is ideal for companies seeking a convenient and secure way to relocate machines and equipment between various work areas. With this product, businesses can save both time and costs associated with moving and installing machinery. In summary, the M900 mobile machine base offers a reliable and practical industrial solution that delivers safety, convenience, and cost-effectiveness. With its adjustable dimensions (from 620x485mm to 870x735mm), a platform capacity of up to 300kg, and a net weight of 10kg, this base is highly adaptable for diverse types of machines while ensuring outstanding durability and operational safety. Technical Specifications M900 Adjustment range: - Minimum: 620 x 485 mm - Maximum: 870 x 735 mm Maximum external dimensions: 1150x990x130mm (with clamp closed) Load capacity: 300 kg Weight: 10 kg Ijdpfx Aaovxtqzjuoia * The image with the machine is for illustrative purposes only.