Postformingo Staklė pirkti naudotą (47 757)

Būklė: naudotas, Gamybos metai: 1975, Technical Details: Swing over bed: 500 mm Swing over cross slide: 260 mm Turning length: 950 mm Centre height measured in bed: 220 mm Knedpsv A Sqhofx Akyoc Distance between centres: 1000 mm Spindle speeds: 11.2 - 2240 rpm / 24 steps Spindle bore: 62 mm Tailstock quill travel: 210 mm Longitudinal feeds: 0.045 - 1.6 mm/rev – 32 steps Cross feeds: 0.02 - 0.71 mm/rev – 32 steps Total power requirement: 11 kW Machine weight approx.: n/a t Machine dimensions approx. LxWxH: 3.3 x 1.2 x 1.6 m The machine is in very good condition (very quiet spindle run), available free in Leipzig. Top slide rotatable 360° 3-jaw chuck Ø 315 mm with jaws (internal/external) for 2000 rpm. Thread cutting: metric, module, inch threads Chip protection wall Chuck guard (mechanical) MULTIFIX toolpost with boring bar holder Ø 40 mm Chip collection tray Coolant supply with pump Lead screw protection Machine feet CE safety pre-installed

Būklė: naudotas, Techniniai duomenys: Gręžimo našumas pliene (skersmuo): 32 mm Išsikišimas: 1000 mm Maks. ruošinio aukštis: - mm Kolonos skersmuo: 300 mm Gręžimo vežimo horizontalus poslinkis: 400 mm Atstumas stalas – veleno apatinis kraštas: 200 mm Veleno kūgis: MK 4 Gręžimo veleno eiga: 200 mm Sukimosi dažnių diapazonas - laipsniškai: 18 pakopų, 14–710 aps./min Knjdpfx Akov S Ay Sjysc Strėlės pasukimo diapazonas: 360 laipsnių Padavimas: 0,09/0,12/0,25/0,5 mm/aps. Apytikslis staklių svoris: 2,0 t Apytiksliai įrenginio matmenys (IxPxA): 2,4 x 0,9 x 2,4 m Transportuojama! Valdymas per mygtuką 4 vnt. reguliuojamų atramų D=16x30 mm, reguliuojamas aukštis 60 mm su reketiniu raktu

Būklė: naudotas, Techninės detalės: Šlifavimo disko skersmuo: 240 mm Pjūklo disko skersmuo: 600 mm Bendras galios poreikis: 1,1 + (0,37 kW) kW Mašinos svoris apie: 600 kg PJŪKLO DISKO GALANDIMO STAKLĖS Mašina automatiškai vykdo šlifavimo procesą Pjūklo diskas paduodamas mechaniškai Knjdpju Ng Edefx Akysc Didžiausias šlifavimo disko Ø: 240 mm Padavimo pavara (0,37 kW) Mašina gali būti demonstruojama i.D.

Būklė: naudotas, Gamybos metai: 1982, Technical details: Kjdpeu Ngxdofx Akysnc Grinding wheel dimensions: Ø 150 x 20 mm Spindle speed: 3,600 rpm Height above floor: 900 mm Power supply: 220 V Approx. machine weight: 27 kg Dimensions (L x W x H): 0.37 x 0.35 x 1.4 m Double bench grinder mounted on pedestal (base Ø 353 mm) Left side equipped with drill bit grinding attachment (angle 90° - 180°), longitudinal adjustment 25 mm incl. accessories

Būklė: naudotas, Technical details: Honing diameter: Ø 400 mm Stroke: 600 mm Throat depth: 390 mm Table size: 1,550 x 780 mm Knedju Ngybepfx Akysc Clamping surface: 1,400 x 480 mm Table: fixed Total power requirement: 4.1 kW Machine weight approx.: 2.8 t Machine dimensions (LxWxH) approx.: 2.0 x 1.2 x 4.35 m Precision honing machine with cross table Further technical features: - Longitudinal travel of machine table approx. 500 mm - Cross travel of machine table approx. 200 mm - Working height 350 mm (not adjustable) - Distance column/table 0 – 200 mm Equipment: - Oil tank Ø 300 x 600 mm - Control panel as per factory specification. *

Būklė: naudotas, Technical details: Grinding length: 300 mm Centre height: 175 mm Swing diameter: 315 mm Clamping area table (L x W): 1,800 x 200 mm Control: Heidenhain Longitudinal adjustment of grinding attachment on table max.: 1,100 mm Workpiece spindle speed: 3 steps / 1,500-2,200 rpm Infinitely variable feed: 0.001–1 mm Max. travel X-axis: 300 mm Machine weight approx.: 3.1 t Machine dimensions approx. (LxWxH): 2.9 x 1.6 x 1.4 m Swivelling during machining, right and left Automatic table reversal Tailstock: MT3 fitting Kedpszaunzefx Akysnc Operation: Hand-held control device/foot switch Coolant: System with supply Heidenhain measuring device

Būklė: naudotas, Gamybos metai: 1997, Techninės detalės: Slėgis: 10 t Detalės skersmuo - maks.: 50 mm Srieginio ilgio ilgis: 100 mm Maks. valcuojamas žingsnis: 3 mm Kedpfex Iu Ifjx Akyonc Valcavimo jėga: 100 kN Detalės skersmuo min./maks.: 117/175 mm Sukimosi greitis: 0 - 150 aps./min Mašinos svoris apie: 2550 t Mašinos matmenys: 1,25 x 1,38 x 2,15 m

Būklė: naudotas, Gamybos metai: 2011, Techninės specifikacijos: Gręžimo našumas pliene (skersmuo): 35 mm Išsikišimas: 350 mm Gręžimo eiga: 180 mm Sriegio pjovimas: ST M 24 mm Verpstės laikiklis MK: MK4 Verpstės sukimo greitis: 50–1450 aps./min. Atstumas nuo verpstės iki stalo (maks.): 780 mm Stalo paviršiaus plotas: 560 x 560 mm Mašinos svoris (apytiksliai): 500 kg Mašinos matmenys (apytiksliai, ilgis x plotis x aukštis): 0,73 x 0,56 x 0,22 m • Sunkus, masyvus, iš lieto metalo pagamintas korpusas • Automatinė pavarų tepimo sistema per alyvos pompą Knjdpfx Aeyli Sfjkyoc • Aukštas veikimo sklandumas dėl poliruotų, alyvoje veikiančių pavarų • Aukštas tikslumas dėl grūdinto ir poliruoto pagrindinio verpstės • Sriegio pjovimo įtaisas iki M24 pliene • Pagrindinis jungiklis ir variklio apsaugos jungiklis • Mechaninis, dviem greičiais valdomas, pinolo poslinkis: 0,1 / 0,2 mm/aps. • Aušinimo skysčio sistema • Reguliuojamas gręžimo gylio ribotuvas • 18 verpstės sukimo greičiai nuo 50–1450 aps./min. • 9 greičiai, pasirenkami per pavarų perjungimo svirtį, kartu su dviem greičiais *

Būklė: naudotas, Technical details: Swing diameter over bed: 350 mm Swing diameter over cross slide: 200 mm Turning length: 560 mm Centre height: 170 mm Spindle bore: Ø 32 mm Speed range: 36...1,800 / 8 steps rpm Feed range x-axis (longitudinal): 0.02–0.8 m/min Feed range y-axis (cross): 0.01–0.4 m/min Tailstock quill taper: MT 4 Tailstock quill stroke: 140 mm Total connected load: 5.5 kW Machine weight approx.: 2.0 t Machine dimensions approx. LxWxH: 2.1 x 1.1 x 1.4 m Kodpfx Aksvadd Ijyonc Mikromat precision lathe - Longitudinal slide travel = 580 mm; Cross slide travel = 170 mm; Top slide travel = 130 mm - Workpiece clamping via 3-jaw chuck Niles Ø 160 mm, speed 2,800 rpm - Tool holder: Multifix quick-change toolpost Equipment: Coolant pump 4 machine levelling feet Copying device

Būklė: naudotas, Techniniai duomenys: Bendras galios poreikis: 2,2 kW Stalo dydis: 500 x 780 mm Darbinė zona: 250 x 250 mm Aukštis nuo grindų: 940 mm Įtampa: 380 V / Hz Kodpfx Akju Icq Teyenc Mašinos svoris apie: 0,642 t Mašinos matmenys (IxPxA): 1,0 x 1,3 x 1,2 m HIDRAULINĖ IŠKIRPIMO MAŠINA Ant stalo kairėje ir dešinėje pusėje yra 90° ilginės liniuotės, ilgis 250 mm Nustatomos atraminės juostos, ilgis 400 mm; kampas reguliuojamas kairėn/dešinėn 90° Valdymas per valdymo mygtukus ir/arba rankinį/pedalinį valdymą Komplekte įrankiai: sumontuoti 2 viršutiniai ir apatiniai peiliai (peilio ilgis 250 mm)

Būklė: naudotas, Gamybos metai: 1990, Techninės detalės: Lakšto storis: 8 mm Pjovimo sritis: 300 x 300 mm Stalo dydis: 1100 x 900 mm Įtampa: 380 V / Hz Apytikslis mašinos svoris: 1,7 t Ksdpfou Ictbsx Akyjnc Mašinos matmenys (I x P x A): apytiksliai 1,3 x 1,2 x 1,5 m 90° metalo segmentų išpjovimui, veikia hidrauliškai. Ant stalo sumontuoti du 300 mm liniuotės, išdėstytos 90° kampu. T-formos griovelis pagal DIN 680: a=12 mm, h=21 mm, b=22 mm, c=14 mm, ilgis: 1x 330 mm ir 2x 700 mm Valdymas per valdymo pultą ir kojinį jungiklį.

Gamybos metai: 2010, būklė: naudotas, Technical Details: Speed range: 180 rpm Voltage: 220/50 V/Hz Machine weight approx.: 150 kg Machine dimensions approx. LxWxH: 1.2 x 0.8 x 1.3 m Total power requirement: 550 kW Passenger Car Wheel Balancer The balancing process is automatic with wheel braking. Program selection: 11 different balancing methods available. Microprocessor-controlled LED display with digital weight readout. Center bore of rim: Ø 40 - 154 mm Shaft diameter: Ø 36 mm Measuring speed: 120 rpm Measuring time: 5 - 10 sec Cone sizes: Ø 44 - 63 mm; Ø 61 - 79 mm; Ø 77 - 114 mm; Ø 107 - 154 mm Wheel dimensions: Rim width: 1.5" - 18" Max. rim Ø: 10" - 24" Max. wheel Ø: 890 mm Knsdpfx Aju Ic Aiokyec Max. wheel weight: 65 kg

Būklė: naudotas, Gamybos metai: 1971, Techniniai duomenys: Didžiausias išorinis skersmuo tekinant priekinio paviršiaus: apie Ø 900 mm Apsisukimų dažnis: veleno: 12,5 - 00 / 24 žingsniai aps./min Apsisukimų dažnis: plokštumos disko: 8 - 190 / 12 žingsnių aps./min Padavimo pakopos: plokštumos disko: 0,03 - 3 / žingsnis Greitas padavimas: visoms judėjimo kryptims: 2000 / 4000 m/min Įrankio tvirtinimas: darbinio veleno: ISO 50 / SK50 Darbo stalo tvirtinimo plotas: 700 x 800 mm Stalas pasukamas: 360° Gręžimo stalo poslinkis skersai: 800 mm Maksimali stalo apkrova: 1500 kg Bendra elektros galia: apie 11,0 kW Staklių svoris apie: 7800 kg Staklių matmenys (IxPxA): 3,0 x 2,0 x 2,6 m Valdymo spintos matmenys: 1800 x 400 x 1950 mm Plokštumos disko Ø: 420 mm Plokštumos disko poslinkis: 180 mm Didžiausias tekinimo Ø apie: 900 mm Stovo išilginis poslinkis: 700 mm Knsdpfeu Idtpjx Akyoc Veleno galvos vertikalus poslinkis: 700 mm Padavimo pavara stovo, veleno galvos ir tvirtinimo stalo: - Veleno režime: 0,20 - 10 mm/aps su 34 pakopomis - Plokštumos disko režime: 0,16 - 16 mm/aps su pakopomis Komplektacija: Optinis precizinis matavimo prietaisas / ašių X/Y/Z/B stalo matavimo sistema Hidraulinė sistema Staklių kojos / pagrindo plokštės Valdymo pultas su laikikliu

Būklė: naudotas, Gamybos metai: 1998, Technical details: Drilling capacity in steel (diameter): 15 mm Drill stroke: 100 mm Tapping capacity: M16 Kedpfxsu Idute Akysnc Number of drilling stations: 3 Drill spindle taper: 3x MK2 Spindle reach: 220 mm Distance between spindles: 335 mm Spindle head adjustment (vertical): 290 mm manual Feed: manual mm/rev Spindle speeds: 220-1600 / 400-3200 / 800-6400 rpm Spindle-to-table distance min./max.: 235/525 mm Table surface: 1270 x 315 mm Table adjustment: fixed Total power requirement: not specified kW Approximate machine weight: 0.72 t Approximate machine dimensions (LxWxH): 1.4 x 0.8 x 2.25 m Including coolant system Operation via hand and foot control The drill spindles are equipped as follows: 1x drill chuck 13 mm 2x quick-action chucks 10 mm

Būklė: naudotas, Gamybos metai: 1966, Technical details: Drilling capacity in steel (diameter): 63 mm Arm reach: 2000 mm Workpiece height – max.: 1270 mm Spindle taper: MT 5 Drilling depth: 400 mm (stroke) Quill travel: 400 mm Feed rate: 0.05 – 0.32 m/min Spindle speeds: 14 – 1000 rpm (40/50/63/160+200 options) Rotatable column: 360° Electrical specification – voltage/frequency: 380 V / 50 Hz Base plate: 1900 x 950 mm Total power requirement: 13 kW Machine weight approx.: 7.9 t Space requirement approx. (L x W x H): 3.9 x 1.5 x 3.4 m This radial drilling machine is equipped with an electric sliding table! Further features: - Distance spindle center to column: 360 – 2000 mm - Distance drill chuck to table surface: 1270 mm - Distance spindle to base plate: 1220 – 4520 mm Knsdpfou Id Dbsx Akyoc - Drilling capacity in St 60: 63 mm at 0.32 feed - Drilling capacity in GG 22: 80 mm at 0.5 feed - Horizontal travel of drilling head: 1640 mm - Vertical travel of drilling head: 980 mm - Distance spindle nose to base plate: 430 – 1770 mm Equipment: - Coolant pump (non-functional) - Support block - 1 electrically driven sliding table, 1250 x 1000 mm, type TI 18 with digital display (interface to the machine) - incl. machine vice Currently, not all spindle speeds can be selected.

Būklė: naudotas, Techninės detalės: Veleno perėjimas: 60 mm Sukimosi ilgis: 45 mm Sukimosi skersmuo: maks. 56 mm Gręžimo gylis: maks. 70 mm Sukimosi greitis: 48 - 1500 (velenas) aps./min. Sriegiavimas: Sukimosi greitis: 24 - 750 aps./min. Įrankio revolveris - stočių skaičius: 8 Bendra galia: 5,5 kW Staklių svoris apie: 2,4 t Kjdpfxou Iwyie Akysnc Užimamas plotas apie: Išmatavimai: 2,1 x 1,0 x 1,8 m Kreive valdoma tekinimo automatika pagal šabloną. Ruonis apkabinamas per tvirtinimo patrontą. Revolverinė galvutė: Diskinis revolveris Hahn & Tessky Esslingen, įrankio eiga 80 mm, reguliavimas 36 mm, atstumas tarp tvirtinimo galvutės ir revolverio min./maks.: 72/188 mm 2 vnt. sukimo atramų, darbo eiga 45 mm 2 vnt. atpjovimo atramų, darbo eiga apie 40 mm Aušinimo skysčio sistema Staklės neprijungtos. Parduodama už siūlomą kainą.

Būklė: naudotas, Technical Details: Swing diameter over bed: 320 mm Turning length: 800 mm Distance between centers: 800 mm Center height: 150 mm Spindle bore: 30 mm Speed range: 35 - 1500 / 16 steps rpm Feed range x-axis: 0.04 - 2.4 / 30 steps m/min Tailstock quill travel: 125 mm Tailstock taper: MT2 Machine dimensions approx. LxWxH: 1.7 x 0.8 x 1.5 m Equipment and additional features: - Röhm 3-jaw chuck, 160 mm - Chuck guard - Protection system WxH: 510x400 mm - Multifix tool holder (4 pieces) Kedpfx Akju Ixy Djyonc - Center in tailstock - Top slide pivotable +/-45°, max. travel = 100 mm - Cross slide travel = 300 mm feed - Coolant system pump (without supply piping)

Būklė: naudotas, Gamybos metai: 1987, Technical details: Swing diameter over bed: 500 mm Swing diameter over support: 280 mm Turning length: 1,500 mm Distance between centers: 1,500 mm Swing diameter in gap: 730 mm Spindle bore: 65 mm Speed range: 25-1,250 / 32-1,600 / 36-1,800 - 18 steps rpm Feed range: 0.05 - 8.5 mm Rapid traverse x-axis: 4 m/min Rapid traverse y-axis: 1.26 m/min Tailstock quill taper: MT 5 Tailstock quill travel: 200 mm Knodpsu Ixznsfx Akyec Total power requirement: approx. 8.2 kW Machine weight approx.: 2.5 t Machine dimensions approx. LxWxH: 3.2 x 1.3 x 1.5 m Thread cutting possible Cross slide travel 300 mm, feed 0.015 - 2.8 mm (end position switch clutch not functional, manual shut-off required) Top slide with 4-position tool post Steel plate Ø 705 mm with offset threaded holes

Būklė: naudotas, Gamybos metai: 1975, Technical details: Swing diameter over bed: 400 mm Swing diameter over support: 220 mm Kedpfxsu Ix E Ho Akyonc Turning length: 1,100 mm Centre height: 180 mm Spindle bore: Ø 45 mm Speed range: 31.5 - 1,400 rpm / 12 steps Feed range x-axis (longitudinal): 0.08 - 1.10 m/min Feed range y-axis (cross): 0.028 - 0.40 m/min Tailstock quill taper: MK4 Tailstock quill travel: 200 mm Total power requirement: 4.0 kW Machine weight approx.: 1.7 t Machine dimensions approx. LxWxH: 2.5 x 1.1 x 1.4 m Equipment: - Three-jaw chuck Ø 250 mm by Forkardt with reversible jaws - Multifix tool holder - Coolant system with pump - Chuck guard - Chip tray - Chip guard Accessories: - Chuck key - Tool holder - 2 gears

Būklė: naudotas, Gamybos metai: 1951, Technical details: Swing diameter over bed: 400 mm Swing diameter over carriage: 240 mm Turning length: 1100 mm Centre height (measured in bed): 190 mm Spindle bore: 40 mm Speed range: 37.5 - 950 rpm Total power requirement: 3.5 kW Tailstock quill taper: MT 4 Tailstock quill travel: 180 mm Approx. machine weight: 1.6 t Approx. machine dimensions LxWxH: 2.6 x 1.4 x 1.3 m The lathe is equipped with a thread cutting device. Knsdsu Ix Hdepfx Akysc It has been newly rewired and fitted with a new control cabinet. Emergency-stop switch and chuck guard installed 3-jaw chuck Ø 250 mm Live centre Four-way tool post Tool slide swivels approx. 30° to the right/left Taper turning attachment (cone 15° right/left) 4 change gears

Būklė: naudotas, Gamybos metai: 1986, Technical details: Swing diameter over bed: 315 mm Swing diameter over cross slide: 200 mm Turning length: 500 mm Swing diameter over bed: 315 mm Maximum swing diameter over faceplate slide: 200 mm Centre height measured in bed: 180 mm Spindle bore: Ø 32 mm Speed range: 56...2,800 RPM / only 6 selectable speeds, left-right Feed range x-axis (longitudinal): 0.02–0.8 m/min Feed range y-axis (transversal): 0.01–0.4 m/min Tailstock quill taper: MT 4 Tailstock quill travel: 140 mm Total power requirement: 5.5 kW Machine weight approx.: 2.0 t Approx. machine dimensions LxWxH: 2.1 x 1.1 x 1.4 m - Workpiece clamping via collet chuck - Travel paths: Longitudinal slide = 580 mm, Cross slide = 170 mm - incl. tool rest (steady for turning) Ksdpfx Akou Ix Hqjysnc - incl. change gears - Steady rest Ø 100 mm - Four-way tool post The machine operates with limited functionality! 6 speeds are currently selectable! (224/1800; 280/2240; 355/2800 RPM) Sale as described.

Būklė: naudotas, Gamybos metai: 2004, Technical Details: Swing diameter over bed: 610 mm Swing diameter over cross slide: 350 mm Turning diameter over bed: 610 mm Distance between centers: 1,390 mm Control system: Fanuc 0i-Mate TC X-axis (cross travel): approx. 305 mm Z-axis (longitudinal travel): approx. 1,350 mm Spindle speed: 22 - 2,200 rpm Feed rate (X + Z axis): 5 / 10 m/min Spindle bore: Ø 70 mm Tool turret - number of stations: 6 Tailstock quill taper: MT5 Tailstock quill stroke: 150 mm Approx. machine weight: 2.7 t Total power requirement: 15 kW Machine dimensions (LxWxH): approx. 3.7 x 1.7 x 1.7 m Hydraulics dimensions: 630 x 460 x 900 mm Additional features: - Hydr. power chuck TONFAU Ø 300 mm - Hydraulic system - Coolant unit - Control panel - Double foot switch Accessories: - Various form jaws - Various soft jaws Knsdju Ix I Uspfx Akyoc - 6 foot rests

Būklė: naudotas, Gamybos metai: 2006, Technical Details: Maximum bending angle: 75° Working height: 850 mm Operating voltage: 380 V Machine weight approx.: 1.0 t Machine dimensions (LxWxH): 1.9 x 2.6 x 1.0 m Transport dimensions: 2.6 x 1.8 x 1.0 m Single and double bending of reinforcing steel possible. Number of bending formers: 2 units Bending angles: 40°; 60°; 75° Bar diameter: Single bend = Ø 12–50 mm, Double bend = Ø 12–35 mm Operation via control panel with touch screen Bending table: - Ø 480 mm - Rotational speed: 7.5 / 15 rpm - Bending pin hole: Ø 48 mm (16 positions) - Center pin: Ø 50 x 94 mm Counter-holder bars: - 2 units, length = 840 mm - Manual travel adjustment: 100 mm Knedpfxsu Ibu Rs Akyjc - 13 holes, size Ø 48 mm Accessories: Bending attachments: 2x Ø 60 mm; 2x Ø 78 mm; 1x Ø 96 mm; 1x Ø 122 mm; 1x Ø 160 mm; 1x Ø 200 mm 1x pin for table 8x counter-holders, various shapes 1x bending tray

Būklė: naudotas, Gamybos metai: 1990, Technical details: Tube diameter: 42 mm Wall thickness: 25 mm Round steel: max. Ø 20 mm Square material: tube 25 x 25 mm Maximum bending radius: inner max. Ø 20 mm and outer max. Ø 170 mm Bending speed: not specified °/s Tube feeding length: 3000 mm Control system: RC 7000 software Machine weight approx.: 2.8 t Dimensions of control cabinet: 800 x 700 x 2000 mm Approximate machine dimensions (LxWxH): 5.1 x 0.7 x 2.0 m Application: Processing of formable pipes, rectangular tubes and round rods, as well as square tubes RC7000 software designation, manual programming Rectangular tube 42 x 20 x 2.5 mm Bending direction: leftward Operation via control panel Knsdpfx Akju Ibvuoyoc Accessories: -various bending tools for pipe Ø 25 mm -12 various collets -various auxiliary and clamping devices

Būklė: naudotas, Gamybos metai: 1992, Technical Details: Sheet width: 1550 mm Sheet thickness: 2.5 mm Frame clearance: 1630 mm Blade length: 1550 mm Stroke adjustment, upper beam: 90 mm manual / 70 mm hydraulic Stroke adjustment, lower beam/bending beam: 105 mm manual Stroke adjustment, bending beam: 40 mm Max. bending angle: 93° (L-/Z-bending) and 180° for folding Back gauge: no Total power requirement: 4.5 kW Machine weight approx.: 1.8 t Machine dimensions approx. (LxWxH): 2.6 x 1.1 x 1.7 m Hydraulic unit dimensions: 1400 x 700 x 1480 mm Kjdpfou Ib Anox Akysnc Bending capacity: 2.5 mm at approx. 400 N/mm² tensile strength Hydraulics: OILTECH with approx. 200 liters