Pneumatica Cavazzuti 80X260 pirkti naudotą (2 935)

Būklė: naujas, Gamybos metai: 2021, Max. working width: 260 mm Min. working width: 25 mm Lsdpfx Asv Dtwfeauehf Max. working height: 180 mm Min. working height: 8 mm Feed speed: 4/30 m/min Spindle speed: 6,000 rpm Tool holder spindle diameter: ø 40 mm Tool diameter 1st (bottom) spindle: ø 125 mm Min. tool diameter 4th spindle: ø 110 – 125 – 140 mm Max. tool diameter 4th spindle: ø 200 mm Min./max. tool diameter (except 1st and 4th spindle): ø 110 / 200 mm Diameter and thickness of grooving cutter: ø 145 – 12 mm Working table length: 2,500 mm Axial adjustment of vertical spindles below table: -90 mm Motor power of bottom planer spindle: 4 kW Power of right spindle motor: 4 kW Power of left spindle motor: 4 kW Power of top spindle motor: 5.5 kW Second bottom spindle motor power: 4 kW Feed motor power: 2.2 kW Feed raise/lower: 0.37 kW Working table made of HARDOX steel as standard Pneumatic pressure unit as standard All spindles driven by Poly-V belt for maximum energy efficiency with standard motors Independent motor unit for each spindle as standard Drive system via standard cardan shaft system Standard chip extraction system Manual table lubrication as standard Direct motor start with illuminated buttons from the standard control panel Overall dimensions (L x W x H): 4,300 x 1,600 x 1,700 mm Weight: 2,000 kg

Būklė: naujas, Gamybos metai: 2026, Mitre saw with electronic pusher and controlled axis. Cutting capacity: 55 x 360, 80 x 340, 95 x 325, 125 x 295, 135 x 280 mm Minimum workpiece thickness 10 mm Work table inclined by 8° Technical specifications of the cutting unit: Pneumatic up-cut saw TR500 Motor power 10 HP (7.5 kW), 400 V / 50 Hz TCT saw blade diameter 500 mm, F=30 Z=144 S=4.6 Cutting cycle speed: 4 seconds Technical features of the feed system: PUSH FEED SYSTEM AVAILABLE LEFT AND RIGHT SIDE Feed via rack and pinion system and brushless motor Positioning accuracy +/- 0.4 mm Powerful feed motor for package weight up to 80 kg Maximum push feed speed 90 m/min Pneumatic lifting of pusher at end of cutting cycle and overhead return Data input management: 12-inch TOUCH-SCREEN controller (800x600 pixels) USB port Ethernet port LINUX operating system Load and save machine parameters via USB port Edit and enter cutting cycles (patterns) directly at the controller Transfer of cutting lists created on PC via USB or Ethernet port Operating software: Ledpfxshw Ng Ie Aaujhf Manual input of stack length Partial optimization without length reading of the board Cutting cycle with 3 optimization options (maximum length, order, and board sequence) Up to 1000 cutting lists with 11 lengths each, or one list with 10,000 consecutive lengths 'OPTI' package: automatic board length detection and full optimization Piece length reading via photocell Cutting cycle with 6 optimization criteria (longest length, order, board sequence, volume, minimal waste, and priority length) 'OPTI PLUS' package: total optimization with knot and defect removal (OPTION NOT INSTALLED ON THE MACHINE) Technical description: 'OPTI PLUS' package: for knot and defect removal Photocell for detecting knots and defects during wood mapping Marking with fluorescent chalks/crayons (Note: only orderable in combination with ZA250) Pneumatic side clamping device Program for creating lists on the PC in XML format

Būklė: naujas, Gamybos metai: 2026, Max. edge thickness: 3 mm (optionally up to 8 mm) Min/Max. workpiece thickness: 8 - 60 mm Lhsdpfxjg Tu Rko Aausf Min. workpiece length: approx. 200 mm Min. workpiece width: approx. 80 mm Feed speed: approx. 10 m/min Ready for operation: approx. 6 min Power consumption: max. approx. 14 kW Electrical connection: 400 V – 3 Ph – 50 Hz Machine dimensions: 5250 x 1230 x 1430 mm (LxWxH) Weight: approx. 1700 kg Whispercut jointing unit Corner rounding unit, radius R = 2 mm Quick-change device for corner rounding unit Radius changeover motor EF R = 1 mm Multi-radius scraper (R1/R2) Chassis Release agent spraying unit Cleaning agent spraying unit Edge protection spray Nesting Pneumatic 3-point adjustment Multi-function cutter (R2/R1/chamfer) Equipment for short workpieces

Būklė: naujas, Gamybos metai: 2026, Roll diameter: 700 mm Max. cutting height: 460 mm Cutting width: 680 mm Table height from floor: 940 mm Table dimensions: 1030 x 710 mm Tilting work table: 20° (45° non-CE) Max./Min. blade length: 5040/180 mm Lhsdsgyd Skopfx Aausf Max. blade width: 40 x 0.6 mm Motor power: 3 kW (4 HP) Wheel speed: 736 RPM Extraction hood: 2 x Ø 100 mm Dimensions: 2300 x 1415 x 880 mm Compressed air consumption for pneumatic braking (CE): - Net weight: 400 kg Gross weight (crate): 490 kg Gross weight (box): 520 kg Shipping volume: 2.30 m³ Sound power level: 88.9 dB

Būklė: naujas, Gamybos metai: 2026, Min. / max. veneer thickness: 0.4 - 3 mm Min. / max. veneer height: 12 - 47 mm (optionally up to 60 mm) Min. / max. material height: 10 - 45 mm Minimum material width: 100 mm Minimum material length: 100 mm Pre-milling unit: 2 motors (diamond cutters), 2.2 kW Feed motor power: 2.2 kW Eye-level control panel (console): Chain feed: Pressure plate for PVC and ABS edging: Mechanical pressure zone powered by the main pressure roller and a series of pressure rollers to minimize glue line: Central pressure adjustment: Glue granulate tank: Application of glue to the material using a glue roller: Electronic temperature control, operating temperature 180 - 200°C Pneumatic guillotine for tape cutting: Element gap indicator: Double end trimming saw for precise trimming of excess material front and rear: Precision linear guides: Sawing while in motion for high cutting precision: Veneer feed speed: 9.5 m/min Flat and radius trimming, top/bottom, with vertical and horizontal guides, 2 x 0.55 kW, 12,000 rpm Scraper unit: Polishing unit top/bottom, 2 x 0.18 kW, 50 Hz, 2,800 rpm Height and tilt adjustment: Exhaust ducting 3 x Ø 120 mm, 1 x Ø 100 mm Roller table extension 250 mm: Sound-insulated enclosure with viewing window for all aggregates: Milling unit 0.44 kW Glue roll unit 0.55 kW Glue tank heating 2.2 kW Compressed air connection: 6.5 bar Total power consumption: 9 kW / 400 V Dimensions: L 3590 mm, W 1220 mm, H 1686 mm Lhedpfxjv Dutbs Aaujf Weight: 1100 kg • Pre-milling with counter-rotating cutters on heads to ensure top processing quality. • Double saw for trimming front and rear edges. • Top and bottom trimming with dedicated cutters. • Radial or flat scraper (choice available). - Polishing unit • Equipped with a control computer with LCD display. • Very easy operation—individual units can be switched on/off by pressing just one button. • In summary: an ergonomic and precise machine at a very attractive price, unrivalled in the world market. • Exchangeable glue tank function included as standard.

Būklė: naujas, Gamybos metai: 2025, 99% filtration efficiency – removes smoke, fumes, and fine metal dust. Automatic filter cleaning – the pulse system ensures optimal performance without frequent maintenance. High extraction capacity – up to 3000 m³/h – efficiently eliminates pollutants without obstructing the view of the workspace. Low-noise operation (≤ 78 dB) – enables comfortable working conditions even in confined spaces. Integrated worktable – ergonomic work surface with extraction from below and rear. Robust steel construction – resistant to vibrations and suitable for intensive use. Mobile – equipped with lockable casters for easy relocation. Lhjdpfxeyi Utvo Aauef Safe operation – protected against overheating and particle ignition. Power supply: 380 V / 50 Hz Motor power: 3.0 kW Airflow rate: 2500–3000 m³/h Operating pressure: 2600–3050 Pa Filtration efficiency: 99 % Filter: 2 × polyester cartridges Filter cleaning: Pneumatic, pulse cleaning (backflushing) Dust container capacity: 50 l Noise level: ≤ 78 dB(A) Machine dimensions: 1500 × 1200 × 1600 mm Table area: 1500 × 700 × 750 mm Weight: approx. 200 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2017, mašinos/transporto priemonės numeris: 0-261-04-6713, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 6 836 h, įėjimo įtampa: 400 V, įėjimo srovė: 44 A, įėjimo dažnis: 50 Hz, įvesties srovės tipas: trifazis, ruošinio aukštis (maks.): 60 mm, briaunos storis (maks.): 3 mm, aukščio reguliavimo tipas: elektrinis, X ašies padavimo greitis: 18 m/min, pavaros tipas: elektrinis, bendras aukštis: 2 300 mm, bendras ilgis: 5 760 mm, bendras plotis: 1 555 mm, bendras svoris: 2 600 kg, Įranga: CE žymėjimas, dokumentacija / vadovas, Single-sided Edgebander HOMAG Optimat KDF 650 C (Ambition 1650 FC) – AIRTEC, Corner Rounding, powerTouch Basic Information: • Manufacturer: HOMAG • Model: Optimat KDF 650 C (Ambition 1650 FC) • Year of manufacture: 2017 • Condition: Used, ready for operation • Location: Skwierzyna, Poland _____ MACHINE DESCRIPTION A professional single-sided edgebander designed for processing straight edges of components, applying various types of edging (coil and solid wood strips), and comprehensive finishing. The machine is equipped to a high specification, featuring the AirTec AT 15 unit – seamless edge banding technology, 2x WD 60 corner rounding unit, and the modern powerTouch control system with touchscreen. Fully automated with pneumatic adjustment of working stations directly from the control panel. TECHNICAL DATA • Feed speed: adjustable 8 – 18 m/min • Max. speed with corner rounding cutter: 11 m/min • Working height: 950 mm • Workpiece thickness: 8 – 60 mm Lsdey Ec A Sepfx Aauohf • Edge thickness (coil): 0.4 – 3.0 mm • Edge thickness (strips/banding): 0.4 – 12.0 mm • Total machine length: 5,760 mm WORKING UNIT CONFIGURATION 1. Pre-milling unit: 2 x 2.2 kW with diamond heads 2. Gluing unit A12: Quick-change Quickmelt glue application, infrared preheating of panel edges 3. AirTec AT 15 unit: Enables laser/functional edge processing with hot air. Invisible glue line, perfect joint. 4. Edge magazine: Automatic for coils and strips 5. Pressure zone: 1 main pneumatically-driven roller + 3 pressure rollers 6. End trimming unit: 2 x 0.35 kW motors, for straight/chamfered cuts 7. Top and bottom trimming unit: 2 x 0.55 kW, counter-rotating, DFC cutters with pneumatic adjustment; settings via touchscreen 8. Corner Rounding Unit (WD 60): 2 x 0.35 kW. Multifunctional unit for complete end processing (3D corners). Settings via touchscreen 9. Profile scraper MZ40: Pneumatically retractable (R1 / R2), settings via touchscreen 10. Flat scraper (glue line): For removing excess glue (final finishing) 11. Buffing unit: 2 x 0.18 kW motors CONTROL SYSTEM • powerTouch: modern 21.5" Full-HD touchscreen operator panel • Intuitive graphical interface, production data logging (quantity, time, edge consumption) • Network operation possible (Ethernet) _____ Additional Information for the Buyer: • Machine supplied through HOMAG Poland (official distributor) • Complete technical documentation included • Machine can be inspected during operation

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, veikimo valandos: 756 h, keliamoji galia: 4 500 kg, kėlimo aukštis: 4 600 mm, laisvas kėlimas: 2 250 mm, apkrovos centras: 600 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, statybinis aukštis: 3 000 mm, variklių gamintojas: DEUTZ, pavaros tipas: hidrostatinis, šakių laikiklio plotis: 1 360 mm, šakių ilgis: 12 002 000 mm, šakės plotis: 160 mm, šakės storis: 55 mm, padang padangų: 100 procentas, Priekinės padangos tipas: pilnos gumos padangos (juodos), priekinės padangos dydis: 200/50-10, galinės padangos tipas: pilnos gumos padangos (juodos), galinės padangos dydis: 28X12,5-15, bendras svoris: 11 000 kg, tuščias svoris: 6 500 kg, bendras aukštis: 3 000 mm, bendras ilgis: 2 550 mm, bendras plotis: 2 300 mm, spalva: žalia, Įranga: CE žymėjimas, apšvietimas, kabina, padėklų šakės, pilna techninės priežiūros istorija, visų varančiųjų ratų pavara, įtraukiama šakutė, šakės prailginimas, šoninis poslinkis, COMBILIFT C4500 – 2020 – 756 MTH – DIESEL – DUPLEX 4600 mm – POSIZIONATORE FORCHE – FORCHE IDRAULICAMENTE ESTENSIBILI – COMPLETAMENTE REVISIONATO – PNEUMATICI NUOVI Carrelli elevatori nuovi e usati con garanzia di qualità – FT LOGISTICS Pronto all’uso. Nessun compromesso. ✔️ Questo COMBILIFT C4500 non è solo una macchina — è la garanzia che le vostre operazioni logistiche saranno efficienti, affidabili e senza interruzioni. Progettato per condizioni di lavoro gravose e sottoposto a una revisione tecnica e visiva completa, il carrello si presenta come nuovo ed è immediatamente operativo. Dati tecnici principali: 📅 Anno di produzione: 2020 ⏱ Ore di lavoro: 756 MTH ⛽ Motore: DIESEL ⚖ Portata: 4500 kg 📏 Montante: Duplex – 4600 mm 🔧 Posizionatore forche: 1360 mm 🔩 Forche idraulicamente estensibili: 1200 / 2000 mm 🛞 Pneumatici: Superelastici (100%) Condizioni ✔ Stato tecnico: 5/5 – dopo revisione generale, pronto al lavoro ✨ Stato visivo: ricondizionato, privo di corrosione, come nuovo Dimensioni 📐 Altezza: 2200 mm 📐 Lunghezza: 2550 mm 📐 Larghezza: 2300 mm 📏 Altezza struttura: 2400 mm Equipaggiamenti aggiuntivi 🚜 Cabina chiusa con riscaldamento 🛞 Pneumatici: Superelastici Lhedpfx Aoy Awiuoauef Anteriore: 200/50-10 Posteriore: 28x12.5-15 ⚖ Peso macchina: 6500 kg 📦 Portata: 4500 kg 📍 Baricentro del carico: 600 mm FT LOGISTICS – Qualità garantita. Servizio di cui ti puoi fidare.

Būklė: labai geros būklės (naudotas), veikimo valandos: 4 h, Funkcionalumas: visiškai funkcionalus, bendras plotis: 2 000 mm, bendras aukštis: 2 200 mm, bendras ilgis: 1 900 mm, darbinis plotis: 1 300 mm, šlifavimo plotis: 1 300 mm, bendras svoris: 3 200 kg, aukščio reguliavimo tipas: elektrinis, stalo plotis: 1 300 mm, padavimo variklio galia: 35 W, įėjimo įtampa: 400 V, transporto ilgis: 2 100 mm, transporto aukštis: 2 200 mm, transporto plotis: 2 000 mm, A high-performance wide belt sander, designed for processing wood-based panels, solid wood, plastics, and metal. Suitable for both rough and fine sanding, it ensures excellent surface quality as well as stable and reproducible results. The machine features two independently controlled sanding belt units, allowing the simultaneous use of two different grit sizes. Each sanding belt is equipped with individual speed control, effectively preventing scratches, overheating, and clogging of the abrasive. The conveyor belt table, in combination with precise height adjustment, allows sanding of materials up to 100 mm thick. Material thickness is set via a control panel with digital display, providing high accuracy and user-friendly operation. Each sanding drum is equipped with continuously variable speed control via frequency inverters, as well as sensors for belt tracking. These systems prevent lateral belt drift and automatically stop the machine in case of deviations to protect both the machine and the workpiece. The sander is equipped with a central extraction system and can be connected via Ø100-mm extraction ports to industrial dust collection systems or vacuum cleaners. In addition, each sanding belt has a pneumatic cleaning system that continuously removes sanding dust during operation. Changing sanding belts is quick and uncomplicated—by releasing a single tensioning device, the belt can be removed. The machine is compatible with standard sanding belts joined with tape. No special or proprietary abrasives are required. MAIN FEATURES • Working width: 1300 mm • Two independently controlled sanding belt units • Simultaneous use of two different grit sizes possible • Stepless speed adjustment of each sanding belt (frequency inverter) • Sanding capacity up to 100 mm material thickness • Conveyor belt table with height adjustment • Digital control panel Lodpfx Aasmrqlnoujhf • Pneumatic belt tensioning system • Pneumatic belt cleaning system • Extraction ports Ø100 mm • Fast and easy sanding belt change • Semi-automatic operation Condition of the machine: The machine is in very good condition. It has only been used for short-term demonstration purposes.

Būklė: naujas, Gamybos metai: 2026, Technical Data Lhoden Sk Huspfx Aauef Control System: Multi-axis real-time interpolator with active trajectory prediction, LAN and EtherCat communication, sampling time below 2 ms, correction map, RTCP, remote service access. Working Area: X: 2500 – 4000 mm, Y: 6000 – 12000 mm Z-Axis Clearance: 300 – 700 mm Drive System: Servo drives with EtherCat protocol; X and Y axes with precision ground helical racks, accuracy class 6; Z axis ball screw, accuracy class 5 Linear Bearings: Trapezoidal guide rails Traverse Speed: up to 80 m/min Software Resolution: up to 0.0001 mm Positioning Accuracy: 0.01 mm Gantry Drive: Dual-sided master/slave with gantry angle correction Electrospindles: 12 kW up to 50 kW, inverter-controlled Tool Taper: ISO30 or HSK63 ER32 Max Electrospindle RPM: 24,000 rpm (options: 6,000; 40,000; 50,000) Frame: Welded, ribbed, stress-relieved, and precision-machined steel construction Table Type: Aluminium T-slot raster, solid aluminium, or solid steel Optional Equipment - Material positioning and correction by camera, laser or probe - Linear or revolver tool magazine - Tool cooling by oil mist or chilled air - 3D laser or touch scanner - Positioning stops - Additional angular/rotary axes - Drilling and angular heads - Pneumatic clamps - Part marking - Integration with industrial robots - 3D CAD/CAM software - Automatic central lubrication - Automated liquid cooling system #ploter #CNC #router #millingrouter #machiningcenter #3axis #4axis #5axis #3D #3Dprint #MDF #HPL #Plywood #particleboard #Chipboard #steel #aluminium #aluminum #brass #stainlesssteel #castiron #polypropylene #polycarbonate #acrylic #fermacell #BLUM

Būklė: labai geros būklės (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2924, Rotary Disc Saw STROMAB CT 600 This is a used optimizing saw in very good condition, equipped with above-standard accessories (e.g., outfeed conveyor with pneumatic ejectors; infeed feed table). Power supply (V): 400 Saw blade diameter (mm): Ø 600 Year of manufacture: 2009 Type: CT 600 Ljdpfx Asy D Sdcsauehf Motor power (kW): 7.5 kW Serial number: 2924 Overall dimensions of the setup (mm): approx. 16,000 x 2,650 x 1,600 Total infeed feed table dimensions (mm): approx. 7,400 x 2,200 x 950 Material infeed table dimensions (mm): approx. 6,000 x 1,500 x 950 Outfeed table / conveyor dimensions (mm): 7,300 × 220 × 1,120 Number of pneumatic ejectors on outfeed table/conveyor: 7 units Saw blade speed (rpm): 2,800 Saw table swivel range (°): max. ±70 Cutting height at 0°: 160x310 mm, 80x390 mm Cutting height at +/-45°: 160x220 mm, 80x270 mm Cutting height at +/-70°: 160x100 mm, 80x130 mm Saw table rotation speed from 0° to 70°: 3 seconds Dust extraction connections: Ø 100 mm, Ø 120 mm Control and programming unit: ELCO ELETTRONICA Power 1000 The original manual is available in both English and Slovak in printed form. For additional information or inquiries, please contact us by email.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Engine power: 2.2 kW Manual feed of the aggregates Blade diameter: 330 mm 3000 rpm Maximum aggregate spacing: 3300 mm Cutting angle adjustment: -45/+45 degrees Vertical pneumatic clamps Cutting process initiated by foot pedal Emergency stop switch Width: 900 mm, height: 1500 mm Lhsdpfx Aaowbpwhjuef

Būklė: labai geros būklės (naudotas), Gamybos metai: 2013, Įranga: dokumentacija / vadovas, KraussMaffei KM650-4300 GX machine Clamping force kN: 6500 Tie bar clearance (h x v) mm: 1110 x 960 Lsdpfey Apdqsx Aauehf Mold opening stroke mm: 1450 Min. mold height mm: 450 Max. mold height mm: 1000 Ejector stroke mm: 250 Screw diameter mm: 90 (HPS-M mixing) L/D ratio: 20 Injection pressure bar: 1839 Shot volume cm³: 2290 Control version: MC5 Language: German Condition: Tested, operational Equipment: - Anti-vibration leveling pads - BluePower - Servo pump drive for reduced energy consumption - Wear-resistant plasticizer, additional cost - BluePower - Complete insulation of the plasticizing cylinder for reduced energy consumption - 2 x pneumatic valve on moving platen for blowing function - 2 x pneumatic valve on fixed platen for blowing function - Pneumatic cascade control, 4-fold for hot runner - Hydraulic cascade control, 4-fold for hot runner - Conveyor belt control - Mechanical robot interface according to EUROMAP 18 - Hydraulically actuated ejector plate including threaded holes and through-holes in moving platen for ejector pins - Hydraulic core pull system, dual on moving platen - Hydraulic core pull system, dual on fixed platen - Pneumatic core pull system, single on moving platen - Pneumatic core pull system, single on fixed platen - Pressure relief for hydraulic core pulls - Pressure relief for hydraulic cascade valves - 20 hot runner control zones - Power socket combination (3 sockets, single-phase; 2 CEE 16 A, 1 CEE 32 A) - Volt-free contact for "Plasticizing" signal at HAN 3 A socket - Switch-over to holding pressure depending on internal mold cavity pressure (Kistler) - Quality statistics - Chip card reader unit - Graphical display and analysis package with 10 diagrams - Trend graphics - PV control - Interface for production data comprising 5 volt-free contacts in the control cabinet - 3 freely programmable inputs/outputs in control cabinet: KraussMaffei Linear Robot LRX 350: - Fully integrated control - Horizontal stroke: 4000 mm - Vertical stroke (telescopic): 2000 mm - Demolding stroke: 1200 mm - Max. payload: 35 kg

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2018, veikimo valandos: 30 917 h, keliamoji galia: 6 000 kg, kėlimo aukštis: 4 650 mm, apkrovos centras: 600 mm, kuro tipas: dyzelinas, stiebo tipas: teleskopinis, pavaros tipas: hidrostatinis, bendras svoris: 10 000 kg, tuščias svoris: 10 000 kg, spalva: raudona, Įranga: apšvietimas, griebtuvo hidraulika, kabina, oro kondicionavimas, padėklų šakės, šakės prailginimas, šoninis poslinkis, For sale: Linde H60D-03 forklift truck, year 2018 Lhodpfx Aoxu Ii Teauef A reliable, robust machine with a lifting capacity of 6,000 kg, powered by a Deutz TCD 4.1 L4 diesel engine. This forklift is in excellent technical condition, has been regularly serviced, and comes from its first owner. Ready for immediate operation, equipped with a triple fork system featuring side shift (outer forks – individual side shift, middle fork fixed, common side shift for all three). The forklift is from its original and only owner. The forklift has been serviced exclusively at the official LINDE Service in the Czech Republic, with a complete service log available from the date of purchase through 16.05.2025. The technical condition corresponds to about 10,000 operating hours, not 30,000. Many key systems have been replaced or refurbished over the past 7 years, including regularly cleaned DPF filters and annual inspections for micro-leaks or similar issues. The price includes a full set of documents for registration. If required, we also arrange UDT (Office of Technical Inspection) certification quickly and for an extra charge. We offer all forms of payment: – Leasing, loan, cash, and bank transfer. If you pay by cash or bank transfer, you can drive the machine away immediately. Additionally, we offer insurance services – we will find the lowest premium for any vehicle – TRY US! We also deliver paid vehicles and trucks to any address across Europe. For more information about our services, please contact our sales team. Technical data: – Model: Linde H60D-03 (series 396-03) – Year of manufacture: 2018 – Rated capacity: 6,000 kg – Load centre: 600 mm – Engine: Deutz TCD 4.1 L4, 4-cylinder diesel, 85 kW – Drive: hydrostatic – Travel speed: up to 23 km/h – Lifting height: approx. 4,650 mm (duplex mast with free lift) – Mast height (collapsed): approx. 2,650 mm – Turning radius: approx. 3,100 mm – Unladen weight: approx. 10 t – Tyres: pneumatic, in good condition Equipment: – Triple fork system (ideal for longer pallets or non-standard loads) – Side shift – Cabin with heating – 3rd and 4th hydraulic section – Work and road lights, mirrors, reversing signals – Comfortable operator’s seat with suspension – Double-pedal drive system (ergonomic Linde controls) Technical condition: – Regularly serviced at authorized Linde service centre – Complete service history available – All maintenance performed on schedule, forklift in continuous operation – No play, leaks or damage – ready for immediate use – First owner, used in a single production plant The price is net and applies to export and companies. Significant discount possible for private customers – Please contact us directly by phone for your best price :)

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2020, veikimo valandos: 756 h, keliamoji galia: 4 500 kg, kėlimo aukštis: 4 600 mm, laisvas kėlimas: 2 250 mm, apkrovos centras: 600 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, statybinis aukštis: 3 000 mm, variklių gamintojas: DEUTZ, pavaros tipas: hidrostatinis, šakių laikiklio plotis: 1 360 mm, šakių ilgis: 12 002 000 mm, šakės plotis: 160 mm, šakės storis: 55 mm, padang padangų: 100 procentas, Priekinės padangos tipas: pilnos gumos padangos (juodos), priekinės padangos dydis: 200/50-10, galinės padangos tipas: pilnos gumos padangos (juodos), galinės padangos dydis: 28X12,5-15, bendras svoris: 11 000 kg, tuščias svoris: 6 500 kg, bendras aukštis: 3 000 mm, bendras ilgis: 2 550 mm, bendras plotis: 2 300 mm, spalva: žalia, Įranga: CE žymėjimas, apšvietimas, kabina, padėklų šakės, pilna techninės priežiūros istorija, visų varančiųjų ratų pavara, įtraukiama šakutė, šakės prailginimas, šoninis poslinkis, COMBILIFT C4500 – 2020 – 756 MTH – DIESEL – DUPLEX 4600 mm – POSIZIONATORE FORCHE – FORCHE IDRAULICAMENTE ESTENSIBILI – COMPLETAMENTE REVISIONATO – PNEUMATICI NUOVI Lhsdpfx Aaeyzd Steusf Carrelli elevatori nuovi e usati con garanzia di qualità – FT LOGISTICS Pronto all’uso. Nessun compromesso. ✔️ Questo COMBILIFT C4500 non è solo una macchina — è la garanzia che le vostre operazioni logistiche saranno efficienti, affidabili e senza interruzioni. Progettato per condizioni di lavoro gravose e sottoposto a una revisione tecnica e visiva completa, il carrello si presenta come nuovo ed è immediatamente operativo. Dati tecnici principali: 📅 Anno di produzione: 2020 ⏱ Ore di lavoro: 756 MTH ⛽ Motore: DIESEL ⚖ Portata: 4500 kg 📏 Montante: Duplex – 4600 mm 🔧 Posizionatore forche: 1360 mm 🔩 Forche idraulicamente estensibili: 1200 / 2000 mm 🛞 Pneumatici: Superelastici (100%) Condizioni ✔ Stato tecnico: 5/5 – dopo revisione generale, pronto al lavoro ✨ Stato visivo: ricondizionato, privo di corrosione, come nuovo Dimensioni 📐 Altezza: 2200 mm 📐 Lunghezza: 2550 mm 📐 Larghezza: 2300 mm 📏 Altezza struttura: 2400 mm Equipaggiamenti aggiuntivi 🚜 Cabina chiusa con riscaldamento 🛞 Pneumatici: Superelastici Anteriore: 200/50-10 Posteriore: 28x12.5-15 ⚖ Peso macchina: 6500 kg 📦 Portata: 4500 kg 📍 Baricentro del carico: 600 mm FT LOGISTICS – Qualità garantita. Servizio di cui ti puoi fidare.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, veikimo valandos: 7 300 h, keliamoji galia: 15 000 kg, kėlimo aukštis: 5 000 mm, laisvas kėlimas: 2 500 mm, kuro tipas: dyzelinas, stiebo tipas: dupleksas, statybinis aukštis: 4 145 mm, šakių laikiklio plotis: 2 540 mm, tuščias svoris: 23 300 kg, bendras ilgis: 5 455 mm, pavaros tipas: Diesel, statybos plotis: 2 540 mm, Diesel forklift Load center: 1200 Lhodpfx Aajv Uttbeusf Mast type: Duplex Condition: Ready for operation and fully functional Technical condition: very good Front tire type: Pneumatic Front tire size: 12.00-20 Rear tire type: Pneumatic Rear tire size: 12.00-20 Description: In addition to this Konecranes model, we have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders available in our Hamburg and Gdansk warehouses. Visit our website - sago-online. Leasing and financing on favorable terms are always possible. We are also happy to buy your used equipment directly, even if you are not purchasing a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide you with detailed advice regarding this SMV15-1200C. P.S.: Our master forklift workshop specializes in repair, maintenance, overhaul, and custom construction for forklifts from 8 tons and up. We are also happy to offer your vehicle for consignment sale at our facility. Crane arm Heater, full cabin, full free lift,

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, veikimo valandos: 7 300 h, keliamoji galia: 15 000 kg, kėlimo aukštis: 3 530 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, statybinis aukštis: 3 450 mm, šakių laikiklio plotis: 2 540 mm, šakių ilgis: 2 200 mm, tuščias svoris: 23 300 kg, bendras ilgis: 5 455 mm, pavaros tipas: Diesel, statybos plotis: 2 540 mm, Diesel forklift Load center: 1200 mm Lhodpfx Asxn U Ipjausf Fork width: 350 mm Fork thickness: 70 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 12.00-20 Rear tires type: Pneumatic Rear tires size: 12.00-20 Description: In addition to this Konecranes model, we currently have around 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing at attractive conditions are always possible. We are happy to purchase your used vehicle outright, even if you do not buy a machine from us. Our owner, Mr. Peter Sawitzki, will be glad to advise you personally regarding this SMV15-1200C. P.S.: Our specialist workshop is dedicated to repairs, servicing, overhauls, and custom modifications for forklifts from 8 tons upwards. We can also offer your vehicle for commission sale on our premises. Sideshift, fork positioner, Fork positioner opening range: 810 / 2500 mm Heater, full cabin,

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2015, veikimo valandos: 27 173 h, keliamoji galia: 16 000 kg, kėlimo aukštis: 3 030 mm, kuro tipas: dyzelinas, stiebo tipas: simpleksas, statybinis aukštis: 3 200 mm, šakių laikiklio plotis: 2 600 mm, šakių ilgis: 2 500 mm, tuščias svoris: 23 120 kg, bendras ilgis: 5 575 mm, pavaros tipas: Diesel, statybos plotis: 2 540 mm, Diesel Forklift Load Center: 1200 mm Fork Width: 250 mm Fork Thickness: 90 mm Lhsdsx Ixm Sjpfx Aauef Mast Type: Standard Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyre Type: Pneumatic Front Tyre Size: 12.00-20 Rear Tyre Type: Pneumatic Rear Tyre Size: 12.00-20 Description: In addition to this Kalmar model, we have approximately 200 heavy-duty forklifts, compact forklifts, forklifts & side loaders in stock at our warehouses in Hamburg and Gdansk. Visit our website – sago-online. Hire purchase & financing available on attractive terms at any time. We are also happy to buy your used vehicle outright, even if you do not purchase a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to give you detailed advice on this DCG 160-12. P.S.: Our master forklift workshop specializes in repairs, maintenance, overhauls and custom builds for forklifts from 8 tons upwards. We can also market your vehicle for sale on consignment. Sideshift, Fork Positioner, Heater, Full Cab, Fork Positioner opening range: 700 / 2395 mm

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2016, veikimo valandos: 14 768 h, keliamoji galia: 6 000 kg, kėlimo aukštis: 7 500 mm, laisvas kėlimas: 2 200 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 3 400 mm, šakių laikiklio plotis: 1 520 mm, šakių ilgis: 1 600 mm, tuščias svoris: 13 174 kg, bendras ilgis: 5 050 mm, pavaros tipas: Elektro, statybos plotis: 2 400 mm, Electric Sideloader Load Center: 800 mm Ljdpfx Aaey Ap Sheuehf Fork Width: 200 mm Fork Thickness: 60 mm Mast Type: Triplex Condition: Ready for operation and fully functional Technical Condition: Very good Front Tyre Type: Pneumatic Front Tyre Size: 355/65-15 Rear Tyre Type: Pneumatic Rear Tyre Size: 355/65-15 Battery Voltage: 120V Battery Capacity: 930Ah Battery Manufacturer: ` Battery Year of Manufacture: 2021 Description: Besides this Baumann model, we have approximately 200 other heavy-duty forklifts, compact forklifts, counterbalance forklifts and sideloaders available at our warehouses in Hamburg and Gdansk. Visit our homepage – sago-online. Lease-purchase and financing at excellent terms are always available. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be pleased to offer you detailed advice on this EGX60/16/75TR. P.S.: Our master workshop specialises in repair, servicing, refurbishment, and custom modifications for forklifts from 8 tons and up. We are also happy to sell your vehicle on a consignment basis. Fork Positioner, 1x NIVO Fork Cab Heater, Full Cabin, Full Free Lift, Platform Height: 1050 mm

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2013, veikimo valandos: 12 668 h, keliamoji galia: 5 000 kg, kėlimo aukštis: 5 980 mm, laisvas kėlimas: 1 990 mm, kuro tipas: elektrinis, stiebo tipas: triplex, statybinis aukštis: 2 970 mm, šakių laikiklio plotis: 1 500 mm, šakių ilgis: 1 600 mm, tuščias svoris: 11 770 kg, bendras ilgis: 5 340 mm, pavaros tipas: Elektro, statybos plotis: 2 530 mm, Electric sideloader Load centre: 800 mm Fork width: 200 mm Fork thickness: 50 mm Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tyres type: Pneumatic Lhsdjyriwzjpfx Aaujf Front tyres size: 3.00-15 Rear tyres type: Pneumatic Rear tyres size: 3.00-15 Battery voltage: 80V Battery capacity: 1250Ah Battery year: 2024 Description: In addition to this Baumann model, we have approximately 200 heavy-duty forklifts, compact forklifts, counterbalance forklifts & sideloaders in stock at our Hamburg and Gdansk warehouses. Visit our homepage - sago-online. Lease-purchase & financing on favourable terms are always possible. We are also happy to purchase your used machine outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to advise you in detail on this EGX50/16/60TR. P.S.: Our forklift master workshop specialises in repair, servicing, reconditioning, and custom builds for forklifts from 8 tonnes upwards. We are also happy to display your vehicle for consignment sale in our facility. Fork positioner Fork positioner opening range: 560 / 1440 mm Heating, full cab, full free lift Platform height: 1020 mm

Būklė: geras (naudotas), Gamybos metai: 2015, Pellet production line with components from Mechanika Nawrocki and Cedrus. The line is equipped with two Mechanika Nawrocki GRB2 750 pellet mills, each with 100 kW motors. Includes two hammer mills, each 250 kW. Features filter cyclones for dedusting, pneumatic and mechanical conveying systems, and dosing bins. Year of manufacture: 2015/16. Individual machines can be purchased separately. Lhodpswcdlpofx Aausf

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2013, Funkcionalumas: visiškai funkcionalus, bendras svoris: 500 kg, MAKOR TF/P PLUS Plaster Application Machine 19.06.6512 Model: TF/P Plus Maximum working width: 150 mm Maximum height: 120 mm Adjustable feed speed: up to 140 m/min Powered top pressure rollers: 6 Pressure force adjustment: pneumatic Powered bottom rollers: 6 CE marked Year of manufacture: 2013 Product Description: - Paint application without waste (Verniciatura senza sprechi) Lodpfx Aajytc Rkjuohf - Robust and efficient conveying with 6 motorized pressure units. - Various application heads ensure excellent results, also for filling compounds and defect repair products. Designed for continuous cycle application of bole, gesso, and paint on mouldings, picture frames, and profiles using an extrusion system with a suitably shaped steel counter-template. Constructed with steel sheet and tubing. Guaranteed forward movement via 6 lower metal rollers and 6 upper rubber-coated pressure wheels, with variable speed regulated by an inverter. The upper pressure wheels are mounted on free-running bearings to reduce abnormal wear. The pneumatic control panel is equipped with a selector for the upper pressure wheels and individual pressure regulators.

Būklė: naujas, Condition: New Delivery time: approx. 10 weeks after order Country of origin: Turkey Price: €55,300 Leasing rate: €1,045.17 Bending length: 2,550 mm Sheet thickness (420 N/mm²): 2.5 mm Max. sheet thickness – stainless steel: 1.5 mm Max. sheet thickness – aluminium: 3.5 mm Drive: Motorised Length: 3,830 mm Width: 2,200 mm Height: 1,900 mm Weight: 4,050 kg Backgauge: 1,000 mm Lhedpfowiq A Usx Aaujf CNC CONTROL WITH TABULAR PROGRAMMING - 15.6" touchscreen on pivoting arm - Tabular programming by entering the respective axis values - Open or closed hemming function - Multi-radius functions for hemming or bending - Programming of material quality, sheet thickness, springback, bend corrections, and creation of a database for various material types, sheet thicknesses, and sheet lengths - Piece counter - Password authorization - 128GB HDD, thus virtually unlimited storage capacity - Remote maintenance via WiFi - Detailed alarm, tool, and parameter pages Motorised drive (servo motors) of the upper beam and bending beam (Z and Y axes) Motorised backgauge (X axis) with servo drive, 1,000 mm, rectangular configuration, with ball rollers in the sheet supports Upper beam opening: 220 mm (without tooling) Manual adjustment of the bending beam: 35 mm Upper beam with 45° geometry Continuous upper tool rail 20° with R1 2 pcs. bending beams (7 or 10 mm, 15 or 25 mm) Front light curtain safety device Three-way foot pedal OPTIONS: Segmented gooseneck rails Pneumatic tool clamping Segmented lower and bending tools Servo-drive for the bending beam Manual crowning system Second foot pedal Side gauge Rear light curtain safety device 2D or 3D graphic control PC software Special Omega geometry for lower and bending tools Tapered backgauge Backgauge extension Vacuum holder

Gamybos metai: 2020, būklė: naudotas, Funkcionalumas: visiškai funkcionalus, statybinis aukštis: 2 200 mm, ašies skaičius: 3, vietos reikalavimas ilgis: 5 000 mm, reikalingas plotis: 5 500 mm, mašinos/transporto priemonės numeris: 50844458, automatizacijos lygis: automatinis, gamybos pajėgumas: 3 000 vienetas/val, We are offering this used PIA Automation production line for surgical disposable masks, manufactured in 2020. The line operated for only 2.5 years in single-shift operation and can be described as being in "very good" condition. The production line is additionally equipped with a connected compressed air supply as well as a packaging and shrink-wrapping unit. The buyer will also receive raw materials sufficient for the production of approximately 300,000 surgical disposable masks. Year of manufacture: 2020 Operating pressure (pneumatics): 6.0 bar Operating voltage: 3P/N/PE 400V AC 50 Hz Main fuse: 25 A Short-circuit rating: < 10 kA Concept: The line consists of a total of three units, which are interconnected by conveyor sections. In the first segment, individual consumables are fed via rollers, folded, the nose strip is integrated, welded, and then cut to the correct length. The finished, cut masks are transported via an indexing conveyor and other transfer belts to the subsequent units, which are set up in parallel. There, the ear loops are fed and welded to the main mask body. Lhedpfx Ajy Ddnmeauof If you have any questions or would like more information, please feel free to send us a message or give us a call.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, Four-spindle moulding machine Number of spindles: 4 Spindle arrangement: bottom, right, left, top, bottom Working width: 13 - 230 mm Working height: 6 - 120 mm Feed speed: 8 m/min Feed motor power: 1.5 kW Lhsdpfxsy Enlfs Aaujf Spindle diameter: 40 mm Spindle speed: 6,000 rpm Axial adjustment range of spindles: 30 mm Adjustment range of planer spindle: 5 mm Planer spindle motor power: 5.5 kW Top spindle motor power: 4.5 kW Vertical spindle motor power: 7.5 kW Motors are braked Feed roller diameter: 140 mm Length of the planer table: 2,000 mm Pneumatic pressure for feed rollers Infeed roller before 1st bottom spindle, pneumatically controlled Pressure roller left before machine infeed CE certified Including 4 pcs. cutterheads Dimensions approx. L x W x H = 3,000 x 1,250 x 1,550 mm Weight approx. 1,000 kg Note on used machinery: • Technical data and prior sale subject to change without notice. • Stated prices are ex-works, loaded free of charge. • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machine at the location. • Special agreements are only valid in written form. (Inquiries will only be answered when you provide your address and telephone number!)