Obliavimo staklės ir frezavimo staklės

Futura P.MAX 4+2B

Būklė: naujas, Gamybos metai: 2024, TECHNICAL DATA Table size: 1100 x 760 mm Table height: 870 mm Spindle: Non-removable 30 mm Clamping height: 140 mm Height adjustment: 125 mm Extraction ports: 2 x Ø 120 mm Speeds: 3000 / 4500 / 6000 / 9000 rpm Colour: RAL 7035 Light Grey and RAL 5000 Violet Blue Net weight: approx. 800 kg TECHNICAL DESCRIPTION Solid German engineering Spindle moulder with single-sided tilting, fixed spindle for a swiveling range from -5° to +45.5° Electronic positioning control for height and tilt adjustment, with zero point reset for height and offset positioning Electronic displays for position and spindle speed 4 spindle speeds: 3000 / 4500 / 6000 / 9000 rpm Quick-release belt tensioning device Push buttons for spindle start and stop Forward and reverse rotation Quick clamping system for cutters Finely planed grey cast iron table with fixed frame support Control panel mounted below the fixed frame support Fence 216, total adjustment via handwheel and LCD display, including cast iron fence plates and aluminium chip guards Machine socket Lockable main switch Mechanical motor brake Milling guard and pressure device GAMMA V 1629 Curved milling fence 1639 Tapoa Spindle diameter 30 mm, non-removable Lredpfx Afofpb Nmo Hsr CE compliant GS tested

Būklė: naudotas, Plokštumų obliavimo staklės dvipusės arba keturpusės konstrukcijos REX HOMS Maksimalus obliavimo plotis – 2050 mm Maksimalus obliavimo aukštis – 310 mm Įskaitant sukamo mechanizmo įtaisą 8 nuotraukose parodytas spalvotos „REX HOMS 2050“ modelis (vandens melsvos spalvos) „Jöma“ atnaujino ir išsiuntė jį prieš keletą metų Lrodpfeyid Uysx Af Hsr ir tai yra pavyzdys.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, Spindle tiltable: Yes, 0 to 45° Height adjustment: Handwheel / electric Tilting adjustment: Handwheel / electric Fence adjustment: manual Height display: Digital display Tilt angle display: Digital display Fence position display: mechanical counter Spindle diameter: 30 mm Lrodpfx Asuzkxxsf Her Speeds: 3000, 4500, 6000, 7000, 10000 rpm Motor power: 7 kW Motor brake: Yes, automatic Extraction port: 2 x 120 mm Machine length: 2599 mm Machine depth: 900 mm Weight: 655 kg

Būklė: naudotas, Gamybos metai: 1994, WEINIG PROFIMAT 23 AUTOMATIC 5-SPINDLE MOULDER – USED Lrodpferm Rxwox Af Her Configuration: - 1) Bottom horizontal spindle - 2) Right vertical spindle - 3) Left vertical spindle - 4) Top horizontal spindle - 5) Bottom horizontal spindle Working width: 230 mm Year: 1994 Voltage: 380/50

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, minimax ti 55es LL – Spindle Moulder Image shows T 55 i elite s standard version Professional workshop machine with tilting spindle and 4 speeds. M Digital: motorized height adjustment and tilting. Robust steel and cast iron construction. Large-dimension grey cast iron milling unit, tiltable up to -45° to the rear. Spindle speeds displayed via LEDs. Quick and easy speed change via eccentric clamping. Reversible direction of rotation (right/left). Height and tilt display accurate to 1/10 mm. Heavy-duty industrial fence: with rack-and-pinion fine adjustment, digital display, aluminium fence jaws, 3-position repeat setting for quick adjustment. Scope of delivery: Aluminium fence jaws Curved milling protection hood Table extensions left and right Model: minimax ti 55es LL Article No.: 5502252 Technical data: Worktable dimensions: 2500 x 655 mm Sliding table dimensions: — Usable spindle length: 125 mm Max. tool diameter: 240 mm Max. retractable tool diameter: 230 mm Max. tenoning cutter diameter: 320 mm Spindle tilting range: 0 to -45 degrees Speeds: 3500/6000/8000/10000 rpm Motor power 400V / 50 Hz / S6-40%: 5.0 kW Lrjdpfxjdqzh Re Af Hjr Extraction port diameter: 2 x 120 mm

Būklė: geras (naudotas), Code: 0348 Marke: VITAP - ITALIEN Modell: POINT K2 TOP - CE-Standard CNC-Bearbeitungszentrum für präzises und flexibles Bohren und Fräsen von Platten, Möbeln, Maßanfertigungen, Küchen, Badmöbeln und diversen Anwendungen – CE-Standard – Baujahr 2017 Technische Merkmale: Kompakte Bauweise Patentiertes D.D.T. (Double Dynamic Transport)-System mit kontinuierlicher Plattenbewegung ohne Umpositionierung des Werkstücks, dank zwei Spannzangen. Technische Daten: Plattenmaße: Min./Max. Länge: 270/3000 mm Min./Max. Breite: 180/1100 mm Max. Höhe: 50 mm Horizontaler Plattenvorschub auf X-Achse: 25 m/min Vertikaler Vorschub auf Z-Achse: 15 m/min Horizontaler Vorschub auf Y-Achse: 30 m/min Bohrkopf: Motor: 2 PS 12 vertikale Spindeln, Seite 1 (Z-Achse) 2 horizontale Spindeln, Seite 4 (Y-Achse) 2 horizontale Spindeln, Seite 6 (Y-Achse) 2 horizontale Spindeln, Seite 3 (X-Achse) 2 horizontale Spindeln, Seite 5 (X-Achse) Spindelabstand (Mittel zu Mittel): 32 mm Max. Durchmesser Horizontalfräser: 15 mm Max. horizontale Bohrtiefe: 30 mm Max. vertikale Bohrtiefe: 55 mm Fräseinheit: Motorleistung 5 PS – 24.000 U/min Sägeeinheit: Durchmesser 100 x 4 mm – 7.000 U/min TPA-Software Horizontale Fräseinheit Einlaufrollenbahn: 800 x 600 mm Auslaufrollenbahn: 800 x 600 mm Absaugstutzendurchmesser: 1 x 50 mm / 2 x 100 mm Druckluft: 7 bar Abmessungen (LxBxH): 2530 x 1700 x 1900 mm Lrjdsyzrxzopfx Af Hor Gewicht: 833 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2014, briketo skersmuo: 150 mm, bendras svoris: 3 000 kg, galia: 30 kW (40,79 AG), Output: 450–500 kg/h Maximum pressing force: 1700 kg/cm² Feedstock moisture content: 15% Length: 1800 mm Width: 1800 mm Height: 1900 mm Transport height: 2200 mm Weight: 3000 kg Ledpoqd Uy Asfx Af Hsrr Total power: 33 kW

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, Funkcionalumas: visiškai funkcionalus, Maksimalus padavimo greitis 200 m/min • Elektroninis greičio reguliavimas 30 - 200 m/min • Didžiausias darbinis plotis 250 mm • Mažiausias darbinis aukštis 12 mm • Didžiausias darbinis aukštis 100 mm • Veleno greitis 5000 ir 6000 aps./min • Veleno skersmuo 50 mm. Už papildomą mokestį įrenginys gali būti išmontuotas ir pakrautas į transporto priemonę. Lsdpfoyzdtksx Af Hjrr

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2026, CNC Machining Centers Rover Multi Up M C S Working area *: X = 3280 mm; Y = from 1580 to 1660 mm, depending on operating conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H=74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H=29 mm Workpiece clearance *: Y = 1900 mm Axis travel distances *: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Vacuum system divided into 2 working areas and 2 clamping zones along X. AUXILIARY VACUUM SYSTEM – 2 zones Enables clamping of workpieces via vacuum templates. Remote control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the 16-position rotary tool changer and the 12-position lateral tool magazine. The tool magazines can also be retrofitted. Uninterruptible power supply (UPS) for the machine PC. 6 ATS workpiece supports – 18 module carriers — 6 aluminum workpiece supports. The supports are guided via linear guides with recirculating ball bearing blocks. Clamping is performed at the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located on the front of the workpiece support. — 18 module carriers 132 x 132 x H 41.5 mm with independent pneumatic clamping The vacuum modules can be rotated in 15° steps on the module carriers; ideal solution for shaped components. — 18 sealing plugs for module carriers without template. SA work table (Set-Up Assistant) for work tables up to 1550 mm. Supported manual positioning system with travel direction indicator and position indicator. — Sensors on each table and along the X axis of the working area. — Indication of direction and achieved position for the carriage during positioning phase, mounted on each table The system, according to the programming of the tables, suggests to the operator the movement direction for each table and carriage, confirming the position reached with a green LED and a beep with an accuracy of +/- 1.5 mm. Subdivision of pneumatic system into 2 working areas along X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange prepared for mounting a 5-axis machining unit for aggregate installation. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side-mounted tool magazine with 12 positions integrated in machine bed. Rotary tool magazine with 16 positions, mounted directly on the X machining unit. Tool holder HSK F63, equipped with a long integrated flange, for saw blades on 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Comprising the following 9 items Replacement of standard PC with a high-performance PC. Digital devices for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1 license WorkCenter vacuum cup proposal 5-axis simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg Lrjdpfxoy Ehrxs Af Her - immediately available -

Būklė: naudotas, Gamybos metai: 2018, 1 unit CNC-controlled drilling, gluing and dowel inserting machine GANNOMAT "INDEX 130 PRO" (with options as Index 180 Pro) 400V, 3Ph, 50Hz, complete in standard configuration with: - Linear guide support consisting of: 1 pc. single-spindle horizontal drilling unit, 1.1 kW motor, tool speed selectable via operator software (3,000/5,000/8,000 rpm) 1 pc. reinforced blow-out, gluing and dowel inserting station for 8 mm diameter dowels, dowel length 30 mm - Fully automatic, electronically controlled centralized lubrication - X-axis NC controlled, with working length 1,300 mm, max. travel speed 78 m/min - Z-axis, position programmable over support table 5-40 mm, with option for NC-controlled Z-axis Lrodpfxjxwaz Ho Af Hjr - Dowel insertion projection 7-20 mm, programmable with option of NC-controlled Y-axis Drilling depth from 0-35 mm (with drill length total 70 mm) is automatically set with dowel protrusion - Enclosed glue system with 6 bar glue pressure via glue nozzle, for glues with viscosity from 150 to 350 mPas - Glue quantity steplessly adjustable via operator software - Selector switch GLUE/WATER for rinsing the glue system, 1 stainless steel container each for 5 kg glue and 5 liters of water - Indicator lamp for glue level in glue container - 1 pc. side fence left, 1 pc. side fence right, and 1 pc. center fence (all removable) - 4 pcs. start buttons for individual operation with 1-4 workpieces - 4 pcs. pneumatic angled clamping cylinders 10°, for workpiece thicknesses up to max. 80 mm, workpiece length (Y) min. 70 mm - 1 pc. extraction funnel, connection diameter 80 mm - 1 pc. TCT control with: integrated industrial PC, incl. Beckhoff TWINCAT Soft PLC, operating temperature range 0-50°C, 15" resistive TFT industrial touchscreen display, 1024 x 768 resolution, 2 GHz CPU, 256 MB RAM, 2x network interfaces, IDE hard drive, 4x USB rear, 1x USB front, operating system: WINDOWS 7 - Programming via menu-guided user software, freely programmable drilling distances with absolute, relative, or grid dimensioning, automatic workpiece mirroring and process optimization, 4 work zones assignable with different programs, graphical workpiece display, parametric programming, zero-point shifting, programmable job lists, plain text error diagnosis OPTIONS: - 1 electronic optical glue monitoring system G.I.C. (Glue Insert Control) for 1 glue nozzle - 4 additional vertical angled clamping cylinders 10° with bracket (total 8 clamping cylinders) - Surcharge for machine bed length 1,800 mm with working length 1,800 mm - Surcharge for: 1 horizontal drilling unit, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm (Standard working length not reduced) - 1 NC-controlled Y-axis, with ballscrew and dynamic travel speed 300 mm/sec. Via software, programmable dowel insertion projection 7-30 mm and drilling depth 0-42 mm (with drill length total 77 mm) for vertical drilling unit from above, Y-axis position 5-42 mm - Surcharge for NC-controlled Y-axis position 5-62 mm instead of 5-42 mm - Surcharge for: 1 vertical drilling unit from above, 1.5 kW motor, with multi-spindle drilling head with 3 individually selectable drilling spindles, 32 mm centers in X-axis arrangement, tool speed 3,000 rpm, Y-axis position 5-42 mm, workpiece length (Y) min. 130 mm (standard working length not reduced) - 1 NC-controlled Z-axis, with K