Llc Evolutioner Sm3-1270X2 With Three Bars Segmented pirkti naudotą (37 822)

Būklė: naudotas, Aukštos kokybės skysčio perdavimo ir valdymo komplektas, kurį sudaro 4 identiški „Grundfos“ horizontalūs daugiapakopiai siurbliai ir išsamus pramoninių mėlynų sklendžių komplektas su lanksčiais guminiu išsiplėtimo jungčiais. Njdpfx Aoz Ahmbjhcodb Tinka pramoninėms vandens apytakos sistemoms, vandens apdorojimo padidintuvams, slėgio palaikymui arba technologiniams procesams. Komplektą sudaro: 1. Horizontalūs daugiapakopiai siurbliai: 4 vnt. x „Grundfos“ CM15-3 A-R-A-E-AQQE-A-A-N Variklio galia: 4,0 kW (variklio tipas: MG100LB) Srautas (Q): 17 m³/val. (74,8 GPM) Nominalus aukštis (H): 44,6 m (63,5 PSI) Maksimalus aukštis (Hmax): 51,1 m (72,7 PSI) Maksimalus slėgis: 10 bar (145 PSI) / maks. 90 °C Šalis-gamintoja: 2. Pramoniniai vožtuvai ir jungtys: didelė pramoninių sklendžių partija (mėlynas korpusas su rankiniu svirties valdikliu, skirtu greitai uždaryti / atidaryti srautą). Atitinkami vamzdžių jungimo segmentai ir galiniai dangteliai (žr. nuotrauką). Būklė: naudotas, švarus, saugomas sausoje dėžėje uždaroje sandėlyje.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1979, Overhauled: 1999 Shearing force: 2000 kN Stroke rate: 59/min Capacity: Round steel up to Ø 63 mm, square steel up to 55 mm Machine weight: 7,350 kg Dimensions: 2,260 x 2,920 x 1,770 mm Bar feeder with singling device: Max. bar length: 6 m Dimensions: 6.3 x 1.75 x 2.25 m Weight: 4,000 kg Ndedpfx Ajv Ta Ucohcsb Machine is still connected to power.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, 200 L AIR RECEIVER – HIGH-QUALITY PRESSURE VESSEL FOR COMPRESSED AIR SYSTEMS The CORMAK 200-litre pressure vessel with a working pressure of 11 bar is a reliable solution designed for storing compressed air in industrial plants, workshops, and pneumatic systems. Its robust steel construction, compliance with European Union directives, and UDT certification make this tank an indispensable component of any compressed air installation. With its optimized design and high pressure resistance, this tank can serve as both a storage buffer and a stabilizing element for compressor operation parameters. Key advantages of the 200 L pressure vessel: - Professional pressure-rated construction – manufactured from high-grade 4 mm thick steel, resistant to both pressure and corrosion. - UDT certification and CE marking – full compliance with European safety and quality standards. - 11 bar working pressure – supports most pneumatic systems, including those with higher performance demands. - High capacity – 200 litres – ensures stable pneumatic installation supply and reduces compressor cycling frequency. - Multi-port connection system – six ports with diameters of 1/2", 1", and 2" enable flexible integration into various systems. - Superior build quality – durable anti-corrosion coating inside and out. - Universal installation orientation – vertical design saves space in industrial environments. Technical specifications: - Weight (kg): 80 - Connections: 6 - Connection size: 1/2", 1", 2" - Dimensions: 166.5x45 cm - Tank capacity (L): 200 - Working pressure (bar): 11 - Wall thickness (mm): 4 - Diameter (mm): Ø 450 Nedpfx Ahsxbzd Recsdb - Height (mm): 1665 Standard equipment: - Connection ports: 6 pcs – diameters 1/2", 1", 2" - Nameplate with CE mark - UDT notified body number - Complete technical documentation and pressure vessel passport - Internal and external anti-corrosion coating

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2024, veikimo valandos: 500 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 9850, bendras ilgis: 7 500 mm, bendras svoris: 900 kg, įėjimo įtampa: 400 V, Įranga: dokumentacija / vadovas, Sale of an LCT T 600 demonstration continuous washing system from 2024 at a special price Zones of the continuous washing system: Nsdpfxswpq Eve Ahcjdb Zone 1: Main Washing Zone: Length: approx. 2600 mm Pump: 7.5 kW, 60 m³/h Tank capacity: approx. 400 l Water heated by 3 electric screw-in heaters, each 10 kW Operating wash temperature: approx. 60°C Zone 2: Rinse Zone Length: approx. 2200 mm Pump: 3 kW, 33 m³/h at 3 bar Tank capacity: approx. 350 l Water heated by 2 electric screw-in heaters, each 10 kW Operating wash temperature: approx. 60°C Zone 3: Hot Air Drying Zone: Designed for comprehensive mechanical air-blow-off (from below, sides, and above) of water droplets adhering to the surface of washed items, using air knives and built-in high-pressure fans. The conveyor is equipped with a plastic belt. The frame is made of stainless steel (AISI 304/1.4301), features independent drive, and is controlled via the system's PLC. The conveyor transports washed parts out of the machine, makes a 90° left turn, and then moves parts toward the machine entrance (where components to be washed are loaded). Three photoelectric sensors are installed at various points on the conveyor belt, with special holders and opposing reflectors on the stainless steel frame. Belt width: 400 mm / height up to 400 mm. (At the start – 1 sensor before the turn, 1 sensor at the end, and 1 sensor approx. 2 m before the end). A buffer zone (1-2 m long) is provided. If the buffer zone is filled with returned washed goods, the machine and conveyor stop automatically.

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2015, veikimo valandos: 9 925 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 000 mm, Y ašies eiga: 1 100 mm, Z ašies eigos atstumas: 750 mm, greitas poslinkis X ašimi: 60 m/min, greitas poslinkis Y ašis: 60 m/min, greitasis eiga Z ašyje: 55 m/min, valdiklių gamintojas: Heidenhain, valdiklio modelis: TNC 640, stalo plotis: 900 mm, stalo ilgis: 1 150 mm, stalo apkrova: 2 000 kg, bendras svoris: 22 000 kg, veleno greitis (maks.): 18 000 aps./min, veleno veikimo valandos: 9 925 h, aušinimo skysčio tiekimas: 80 juosta, įrankio ilgis: 500 mm, įrankio skersmuo: 160 mm, Įranga: dokumentacija / vadovas, drožlių transporteris, sūkių greitis be galo kintamas, For sale: Immaculately maintained 5-axis simultaneous universal machining center Hermle C52U with a new spindle (replaced 03/2025), only 400 hours of operation since replacement! Year of manufacture: 2015 Control: Heidenhain TNC 640 Travel ranges: X: 1000 mm Y: 1100 mm Z: 750 mm A: +100°/-130° C: 360° Table load capacity: 2000 kg Clamping surface: 1150 mm x 900 mm Equipment: - Heidenhain TNC 640 CNC control - AVD active vibration damping - ACC active chatter suppression - AFC adaptive feed control - Heavy-duty machining (HDM) - Spindle speed: 18,000 rpm - Spindle taper: HSK-A63 - 60 tool positions Nedpjygx Hnsfx Ahcjdb - 9-channel rotary union - Scraper belt conveyor - Blum A3 tool breakage/tool measurement system - Heidenhain 3D touch probe - Electronic thermal compensation - ICS 80 bar with paper band filter - External air blast - Internal air blast - Electronic handwheel - Hardware kinematics option - Manual cabin door - Automatic cabin roof - Chip flushing gun ...and much more. The machine is available immediately! It is in excellent condition without defects! All maintenance has been performed by Hermle! Spindle replacement also carried out by Hermle! Invoice and measurement protocol available!

Būklė: naudotas, Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, Mašinos sujungtos į vieną liniją (visos trys mašinos parduodamos tik kartu). 1. Lukšto skersinio padavimo klijavimo mašina Fisher+Rueckle FZR-15, pagaminimo metai 2009 2. Tiesioginio sandėliavimo įrenginys Fisher+Rueckle DAR-22, pagaminimo metai 2009 3. Žirklinis kėlimo stalas 1000 kg TECHNINĖ DOKUMENTACIJA (visa dokumentacija pagal pageidavimą) Lukšto skersinio padavimo klijavimo mašina FURNIMASTER FZR-15 Lukšto formato ilgis (išilgai pluošto) 350 - 1500 mm Lukšto formato plotis (skersai pluošto) 50 - 500 mm Lukšto juostos storis 0,3 - 1,5 mm Maksimalus mašinos našumas 30 ciklų/min. (našumo rodikliai galioja, kai vidutinis lukšto juostos plotis yra 100 mm skersai pluošto) Prisijungimo galia (bazinis modelis): Galingumas 13,5 kW Suspausto oro slėgis 6 bar Energijos sąnaudos: Elektros energija 6,2 kWh Suspausto oro sunaudojimas 15 NL/min. Matmenys ir svoris (bazinis modelis): 2940 mm Ilgis x 1000 mm Plotis x 1530 mm Aukštis. 3200 kg Nsdpfx Aet Akcfehcodb

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2025, The machine is on display. Optimill F 110 HSC Premium CNC Milling Machine directly from the manufacturer. F 110 HSC – The OPTIMUM Premium CNC milling machine with Siemens SINUMERIK 828D control stands out for its power, speed, precision, and high durability. · Heavy-duty construction · High productivity · High reliability · Strongly ribbed, torsion-resistant machine base · Linear guideway with ball screw drive for high rapid traverse speeds on all axes · High-torque servo drives on all three axes · Telescopic guideway covers on all three axes · Automatic lubrication · Massive, precision-ground milling table with three T-slots, large dimensions · Portable electronic handwheel with enabling switch and emergency-off impact switch greatly simplifies program setup · Coolant system with chip flushing and cleaning gun · Belt-type chip conveyor ensures efficient chip removal · Chip trolley · RJ45 connection and 230 V power supply · Enclosed control cabinet with integrated heat exchanger for optimal temperature and prevention of ingress of dirt particles · Machine light in working area · SIEMENS extended warranty for materials and free online/on-site service (OSS Plus) Ndodpeymka Hefx Ahcjb · 1 year of basic maintenance contract included in Germany/Austria/Switzerland Milling Spindle: Inline spindle Machine Data Electrical connection: 400 V / ~50 Hz Total connected load: 15 kVA Milling Spindle Drive motor S1 duty: 9 kW Torque drive motor S1 duty: 57 Nm Drive motor S6-30% duty: 21.2 kW Torque drive motor S6-30% duty: 135 Nm Spindle mount: SK 40 / DIN 69871 Option: Internal spindle cooling Drive motor S1 duty: 10.5 kW Torque drive motor S1 duty: 50 Nm Drive motor S6-30% duty: 26.4 kW Torque drive motor S6-30% duty: 125 Nm Coolant System Coolant pump power (2 units): 900 W Max. delivery rate: 35 l/min Tank capacity: 116 liters Cleaning Pump Cleaning pump power: 530 W Milling Accuracy Repeatability: ± 0.005 mm Positioning accuracy: ± 0.005 mm Tool Changer Type: Double-arm gripper Number of tool stations: 20 Max. tool diameter: 78 mm Max. tool diameter (with adjacent stations free): 120 mm Tool length: 300 mm Max. tool weight: 8 kg Tool change time: tool to tool: 2.5 seconds Travel X-axis: 650 mm Y-axis: 400 mm Z-axis: 500 mm Feed Drive Rapid traverse X, Y, Z: 48 / 48 / 32 m/min Motor torque X, Y, Z: 11 Nm / 11 Nm / 20 Nm Feed Forces X, Y, Z: 3.67 kN / 3.67 kN / 6.68 kN Speed Range Speeds*: 12,000 rpm Pneumatics Air pressure: 6 bar Air consumption per hour: 6 – 8 kg/m³ Milling Table Spindle-to-table distance: 100 – 600 mm Table length x width: 850 x 400 mm T-slot size/number/spacing: 18 mm / 3 / 100 mm Max. load: 400 kg Dimensions L x W x H: 2,100 x 2,300 x 2,750 mm Total weight: 4,300 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2024, veikimo valandos: 50 h, Laminating Slat Production Machine The automatic acoustic panel stapler is equipped with an advanced NC three-axis control system, which ensures exceptional precision and flexibility in the production process. Below are the detailed advantages of each axis: 1. X-Axis: Precise Horizontal Stapler Positioning - The X-axis is responsible for the accurate horizontal positioning of the staplers along the panel. This ensures that staples are placed precisely at designated points, guaranteeing uniform stitching quality across the entire panel length, regardless of its dimensions. 2. Y-Axis: Vertical Movement - The Y-axis enables vertical movement of the stapler, allowing stitching at various locations on the panel, independent of panel size or shape. As a result, the stapler can operate on non-standard panel dimensions, maintaining full precision. 3. Z-Axis: Stapling Depth and Force Control - The Z-axis controls the depth and force with which staples are driven into the panel. This allows for precise adjustment according to the thickness and hardness of the acoustic panel material, ensuring staples are driven securely, which guarantees both durability and aesthetic quality of the final product, while minimizing the risk of material damage. ### Automatic Re-Tooling Automatic re-tooling is a key feature of the stapler that greatly enhances production efficiency. Thanks to this function: Nedpfxjy Sw I Ns Ahcsdb - X, Y, and Z axis re-tooling is fully automatic, ### Production Process Optimization Integration with production management systems such as MES (Manufacturing Execution System) and ERP (Enterprise Resource Planning) enables: 1. Full Control Over the Production Process: - Thanks to MES and ERP integration, every stage of production can be fully controlled 2. Optimization of Media and Material Consumption: 3. Optimization of Production Planning: ### Significant Reduction of Manual Labor The automation of the acoustic panel stapling process directly reduces the workload of physical labor: - Elimination of manual control requirements: - Increased work efficiency: ### Ability to Create Algorithms for Production Media Consumption Analysis Thanks to advanced integration with production management systems, the stapler enables the creation of advanced algorithms that analyze the demand for production media: 1. Media Consumption Analysis: 2. Adaptation of Production to Changing Conditions: ### OEE (Overall Equipment Effectiveness) Analysis The stapler also serves as a tool for advanced OEE analysis, a key operational efficiency metric: 1. Comprehensive Production Monitoring: 2. Automatic OEE Calculation: - The MES system automatically calculates the OEE value based on collected data, enabling immediate assessment of the stapler's operational efficiency. This tool allows for the rapid identification of areas requiring optimization, such as downtime reduction, product quality improvement, or increasing machine throughput. 3. Early Detection of Problem Areas: 4. Optimization of Production Planning: ### TPM (Total Productive Maintenance) and Automatic Technical Condition Monitoring The stapler also supports the implementation of TPM philosophy, focused on maximizing the efficiency and reliability of machinery...

Būklė: naudotas, Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 11598-A, bendras svoris: 3 900 kg, įėjimo dažnis: 50 Hz, įėjimo įtampa: 380 V, We offer this used TAYME P-60 debarker, year of manufacture 2011. Technical Data – Debarker TAYME P-60 Peeling Machine (Year 2011) Manufacturer: TAYME S.A. Model: P-60 Nsdpfxsycutco Ahcedb Machine type: Log Debarker / Peeling Machine Year of manufacture: 2011 Serial / Manufacturing number: 11598-A Weight: 3,900 kg 1. Mechanical Specifications Tool type – Peeling heads with serrated knives Maximum pressure – 400 bar 2. Electrical Specifications Rated voltage – 380 V (three-phase) Frequency – 50 Hz Estimated power output – approx. 25 kW 3. Hydraulic System Hydraulic flow rate – 22 l/min (according to nameplate) Maximum pressure – 400 bar System type – Independent hydraulic unit with tank and three-phase motor 4. Main Function Industrial machine designed for: - Debarking logs of various diameters. - Preparing wood for pallets, packaging, chipping, or primary processing. - Peeling via serrated heads and hydraulic pressure. The machine is located in Valencia, Spain, ready for loading and shipment to any destination. If you have any questions or require further information, please feel free to send us a message or call us.

Būklė: naudotas, Gamybos metai: 2019, valdiklių gamintojas: Sonstige, valdiklio modelis: , Description: Double decoiler with drive Design: Compact design Strip width min./max.: 230 – 520 mm Max. coil weight: 2 × 30 kN Number of mandrels: 1 Coil outside diameter min./max.: 1,500 – 2,000 mm Expansion range min./max.: 460 – 525 mm Coil supply: Floor transport vehicle Mandrel loading: From the front (operator side) Coil payoff: From the underside of the coil Material: Aluminium, soft Strip thickness min./max.: 0.8 – 1.2 mm Tensile strength (Rm) min./max.: 100 – 250 N/mm² Max. strip cross-section: 600 N/mm² Straightening capacity: See straightening diagram Strip speed min./max.: 2 – 10 m/min Entry height above floor: 2,100 mm Degree of automation: Fixed / ± XXX mm Operating mode: Jog mode, visual control System parameters Cycle rate: 45 rpm Working direction: Right–left, front loading by forklift Flatness of installation site: ± 15 mm Connection voltage: 400 V, 50 Hz Ambient temperature: 20 – 40 °C Compressed air connection: 5 bar Mandrel: - Double mandrel with drive - Expansion: - Manual toggle lever system with hand crank - Coil limitation - Single arms, manually adjustable according to scale, secured at the front by quick-release lever and at the rear by clamping screws - Brake/Drive: - 2 frequency-controlled asynchronous motors Ndsdjz Enbbjpfx Ahceb - 2 dual-circuit safety pneumatic disc brakes - Swiveling: - Manual lockable swivel by pedal, 180° - Pneumatic pressure rollers with rubberized rollers on top mounted on consoles - Hydraulic expansion: - Hydraulic expansion instead of manual expansion with hand crank - Hydraulic unit with valves/piping mounted on the mandrel head - Strip extraction and strip feeding loop: - Control via ultrasonic sensor/laser on the decoiling side

Būklė: labai geros būklės (naudotas), Parduodama Rietschle CLFT 81 DV vakuuminė-slėginė pompa, žinomo vokiško gamintojo. Tai sausai veikianti mentelinė pompa, skirta vienu metu generuoti vakuumą ir suspaustą orą. Naudojama pakavimo, spaudos, medžio apdirbimo, CNC staklėse, pneumatinio transporto įrenginiuose bei kitose pramoninėse sistemose. Įrenginys komplektuojamas su trifaziu 3,0 kW elektros varikliu ir sumontuotas ant tvirtos, kompaktiškos konstrukcijos. Techniniai duomenys: Gamintojas: Rietschle Modelis: CLFT 81 DV (13) Pagaminimo metai: 1991 Kilmės šalis: Vokietija Tipas: vakuuminė-slėginė pompa (sausai veikianti, mentelinė) Našumas: 80 m³/h (50 Hz) Maksimalus slėgis: 0,5 bar Variklio galia: 3,0 kW Apsisukimų dažnis: 1450 aps./min Maitinimas: 3×380 V Pastovus darbas: S1 Serijos numeris: 1375434 Naudojimo sritys: pakavimo įrenginiai, CNC staklės, Nedpfxjziw Rpe Ahcjdb medžio apdirbimo pramonė, spaudos pramonė, pneumatinio transporto sistemos, įrengimai, kuriems reikalingas vakuumas arba suspaustas oras. Būklė: Naudota. Vizualinė būklė pagal nuotraukas. Tvirta konstrukcija, paruošta tolimesniam naudojimui.

Būklė: labai geros būklės (naudotas), CATALOG NUMBER 7503 TECHNICAL DATA: - Max planing width: 610 mm - Max planing height (two-sided): 200 mm - Max planing height (four-sided): 100 mm Top side: - 2 rubber feed rollers - 2 toothed feed rollers - Metal feed roller - Toothed infeed drive shaft - Pawls - Pressure unit - 2 toothed drive shafts - Pressure unit - 610 mm planing shaft, 4-knife, 7.5 kW - Pressure unit - Smooth metal feed roller - Pressure unit - Profiling shaft, 7.5 kW - Pressure unit - Rubber feed roller Bottom side: - Planing shaft, spindle diameter 35 mm, shaft length 130 mm, 2.2 kW - 2 guide bars - Infeed table - Smooth drive shaft - 610 mm planing shaft, 4-knife (currently equipped with 2 knives), 7.5 kW - 2 smooth drive shafts - Split metal sliding roller - Side pressure Rear side: - Side spindles with 2 pressure units - 1) Right vertical spindle 95 mm, 4 kW - 2) Left vertical spindle 95 mm, 4 kW - Spindle diameter: 35 mm - Spindles adjustable up/down, right/left - Adjustable rollers in the lower table - Electric thickness adjustment - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW Nodpfxszr Ixcs Ahcjdb - Extraction ports diameters: 3×120 mm, 3×160 mm - Dimensions (L/W/H): 3150 x 1900 x 1600 mm - Weight approx. 3500 kg ADVANTAGES: – The best wide planer for wet and dry wood – Perfect for processing logs, flooring, etc. – Additional profiling shaft and planing shaft (scorer) – 4 horizontal planing shafts + 2 vertical spindles – Manufactured by German brand KUPFERMUHLE – Used planer, in very good condition Net price: 66,900 PLN Net price: 15,930 EUR (based on 4.2 EUR exchange rate) (Prices may vary with exchange rate fluctuations)

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, veikimo valandos: 240 h, Funkcionalumas: visiškai funkcionalus, darbinis slėgis: 6 juosta, Šį įrenginį naudojome PVC brezentams gaminti. Įmonė užsidaro. Techninės detalės – nuotraukoje. Įrenginys veikia be jokių problemų, iki šiol nebuvo reikalinga jokia priežiūra, nors šį klausimą galima išsiaiškinti su gamintoju Italijoje. Įrenginys veikia puikiai, neperkaista. Galimas vaizdo skambutis. Komplekte yra trys elektrodai: vienas fiksuotas, 100 cm x 20 cm Ndodpfx Ajzy E D Eehceb vienas fiksuotas, 50 cm x 2 cm vienas lankstus, 100 cm x 2 cm 400 l per minutę 200/300 l oro Darbinis slėgis – 6 bar, maksimalus – 8 bar.

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2022, Showroom Model: Screw Compressor ALMIG BELT XP 8 – 10 bar (air-cooled) Year: 2022 / IMMEDIATELY AVAILABLE! MA0168 Technical Specifications Model: BELT XP 8 Operating overpressure: 10 bar(g) Ndsdpfxsw Aanys Ahceb Free air delivery, according to ISO 1217 Annex C: 0.99 m³/min Protection class / insulation class of drive motor: IP 55 / ISO F Nominal power of drive motor: 7.5 kW Operating voltage / frequency: 400/50 V/Hz Sound pressure level (DIN 45635 T.13): 63 dB(A) Length: 800 mm Width: 670 mm Height: 1100 mm Weight: 275 kg Compressed air connection: G 3/4" Visit our showroom in Erlangen. We always have a large selection of new and used compressors in stock. For new machines, we offer leasing through our partner bank with a truly simple process.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, galia: 7,5 kW (10,20 AG), obliavimo plotis: 625 mm, įrankio skersmuo: 125 mm, peilių skaičius: 4, sukimosi greitis (min.): 5 000 aps./min, bendras svoris: 1 000 kg, 4 peilių TERSA obliavimo velenas Variklio galia 7,5 kW Storio reguliavimo stalo padėties valdymas Segmentinis padavimo volelis Segmentinis prispaudžiamasis strypas 7 + 14 m/min padavimo greitis Stalo praplėtimas Ndsdpfx Ahjz Dkftscjb Obliavimo plotis 625 mm, pašalinamas iki 8 mm, obliavimo aukštis 3,5–305 mm Storio reguliavimo stalas, paremtas ant keturių atraminių velenų ir su keturių taškų kreipiančiomis sistema. Stiprus, išlietas stalas su smulkiu apdirbimu. Modernus valdymo pultas, ergonomiškai išdėstytas. Elektrinis storio reguliavimo stalo reguliavimas su LED ekranu. Mygtukai, skirti reguliuoti greitu arba lėtu režimu, Reguliavimas tikslus iki 1/10 mm; integruotas valandų skaitiklis. Elektroninis paleidimo ir stabdymo įrenginys. Elektroninis stabdys be trinties, užtikrinantis saugų peilių veleno sustojimą. Padavimo volelis iš gumos ir du gumos ištraukiamieji voleliai (aukštos kokybės, atsparūs nusidėvėjimui). Segmentinis prispaudžiamasis strypas, su sukamas rankenėle ir skale, skirtas reguliuoti prispaudimo (prieštempį) ištraukiamajam prispaudžiamajam strypui. Du padavimo greičiai: 7 + 14 m/min; galima perjungti elektriniu būdu net obliavimo metu. Storio gaubtas su kilimine danga, gali būti naudojamas kaip medienos laikymo paviršius. Dulkių ištraukimo antgalis, skersmuo 160 mm, kairėje (galima pasirinkti ir dešinę – gali būti lengvai modifikuojamas vietoje). Oro greitis 22 m/s. Integruotas įrankių laikymo skyrius, skirtas valdymo įrankiams ir obliavimo peiliams. Elektrinė įranga pagal VDE/EN 60204 su pagrindiniu jungikliu, avarinio sustabdymo mygtuku ir antruoju avarinio sustabdymo mygtuku, esančiu medžiagos priėmimo pusėje, apvijų apsauga, žemos įtampos apsauga, kontaktas, skirtas valdyti dulkių ištraukimą. Komplektacija: 1 peilių rinkinys sumontuotas, valdymo įrankiai, tepalinė, naudojimo instrukcija. Svoris: apie 1000 kg Atitinka CE reikalavimus, BG-Holzstaubgeprüft Nr. HM 23001 Emisijos lygis darbo vietoje, dB(A), pagal DIN 45635, 1650 dalis. Triukšmo lygis be apkrovos: apie 69 dB(A), triukšmo lygis darbo metu: apie 79 dB(A). Dulkių emisijos lygis darbo vietoje: 0,44 mg/m³

Būklė: naudotas, Gamybos metai: 2016, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 075514503516, A201015148, X ašies eiga: 100 mm, Y ašies eiga: 100 mm, Z ašies eigos atstumas: 100 mm, Įranga: dokumentacija / vadovas, Nurodyta kaina yra be pridėtinės vertės mokesčio (PVM). 3D optinis metrologijos mikroskopas puikios būklės. Jis buvo naudojamas moksliniuose tyrimuose. Visa pramoninė matavimo sistema su 5x / 10x / 20x / 50x objektyvais. Pagrindinės techninės specifikacijos: - Motorizuotas Z ašies judėjimas: 100 mm - Motorizuotas XY ašies judėjimas: 100 × 100 mm, didelis tikslumas - Motorizuotas objektyvų laikiklis: 6 objektyvams - Integruota, skaitmeniniu būdu valdoma poliarizacijos funkcija Įskaičiuota įranga: - IF-RibSet aparatinė įranga: - 64 bitų didelio greičio valdymo serveris - 24 colių monitorius, valdymo rankena, pelė ir klaviatūra - Programinės įrangos moduliai: - IF-LaboratoryMeasurementModule – skirtas 3D duomenų rinkimui - IF-MeasureSuite – grafinis vartotojo sąsajos ir matavimo duomenų bazės modulis - Matavimo moduliai: Nodpezl Hglefx Ahcjdb - profilio formos matavimas - profilio šiurkštumo matavimas - paviršiaus tekstūros matavimas - tūrio matavimas - 2D vaizdo matavimas - automatizavimas - Alicona Inspect modulis – skirtas geometriniam skirtumui ir tolerancijai matuoti - Edge Measurement Package – apima pjovimo briaunos spindulio, formos, įtrūkimų, nuolydžio, kontūro ir daugybinių briaunų matavimą - IF-Real3DRotationUnit G2 – motorizuotas sukamasis įrenginys su rankiniu pakreipimo ašimi ir trijų žandų tvirtinimo sistema - RinglightHP – skaitmeniniu būdu valdomas baltas LED žiedinis apšvietimo įrenginys, 24 segmentai, 56 šviesos diodai - Įskaičiuoti objektyvai: - 5x, darbinis atstumas 23,5 mm - 10x, darbinis atstumas 17,5 mm - 20x, darbinis atstumas 19,0 mm - 50x, darbinis atstumas 11 mm. Sukurta 3D paviršiaus matavimui, šiurkštumo matavimui, įrankio briaunos tikrinimui, mikrogeometrijos matavimui, nusidėvėjimo analizei ir tiksliam kokybės kontrolei. Ši sistema tinka metrologijos laboratorijoms, įrankių gamintojams, aviacijos ir kosmoso pramonės įmonėms, automobilių pramonės įmonėms, medicinos įrangos gamybos įmonėms, mokslinių tyrimų ir plėtros centrams bei universitetams. Prieš pirkimą galima atlikti patikrinimą ir bandymus.

Gamybos metai: 2004, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Sealpac 800 | Automatic High-Performance Traysealer Manufacturer: SEALPAC GmbH Model: SEALPAC 800 Type designation: TVG 01 1031 01 Year of manufacture: 2004 Power supply: 3x 400/230 V, 50/60 Hz Connected load: max. 10 kW Compressed air requirement: 8 bar / 650 l/min Cooling water consumption: approx. 4–5 l/min Ndjdpfoy T Su Tox Ahceb Protection rating: IP 65 Machine weight: approx. 2000 kg Dimensions (LxWxH): 8500 × 900 × 2000 mm Transport System and Tooling: - Infeed and outfeed conveyors: mesh/belt, effective width: (2x) 220 mm - Included formats / Tool dimensions: - Four-row die: (4x) 220 × 160 mm - Three-row die: (3x) 288 × 220 mm - Maximum tray depth: up to 200 mm Additional equipment (included): - Busch vacuum pump Type: 250-132 Serial number: 49167 Capacity: 250 m³/h Ultimate vacuum: 0.5 mbar Oil quantity: 6 litres (recommended type: SAE 30) - Accessories: Additional pallet with spare parts and format components. Description: SEALPAC 800 is a fully automatic, industrial tray sealing line, designed for continuous operation in meat, poultry, fish processing plants, as well as ready meal production. The machine precisely forms a vacuum and applies a protective gas mixture (MAP / gas flushing technology), significantly extending the freshness and shelf life of packaged food products. Thanks to its impressive frame length (8.5 m), the machine provides a long and convenient loading zone for personnel or automatic dosing units. It features modern microprocessor control, low noise emission (approx. 73 dB), and a full stainless-steel construction rated at IP 65, permitting aggressive chemical and pressure washing after production. The included Swiss Busch vacuum pump with a capacity of 250 m³/h ensures rapid and stable achievement of deep vacuum levels in the sealing chamber.

Būklė: naudotas, Grinding diameter: 350, 450 mm Grinding length: 600 mm Center height: 175, 225 mm Grinding wheel diameter: 400 mm Grinding wheel width: 50 mm Bore: 127 mm Workpiece spindle taper: MK5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: 360° Grinding headstock swivels: 180 ± ° Grinding spindle speed: 1500, 1700, 2200 rpm Infeed per stroke: 0.001–0.030 mm/Ø Continuous infeed: 0–0.95 mm/Ø Table swiveling: ±10° Longitudinal table travel: 900 mm Table speed: 0.02–6 m/min Workpiece weight between centers: 130 kg Maximum workpiece weight (unsupported): 130 kg (including clamping) Internal spindle mounting: 70 mm Total power requirement: 6.5 kW Machine weight approx.: 2.2 t Space requirements approx.: 3.1 x 2.0 m As a global leader in Kellenberger overhaul/retrofit, we not only deliver machines in as-new quality with warranty, but also provide service for your machines, metrically overhauled and freshly painted. Photo shows a machine already delivered, possibly with different options. Machine is equipped standard with central lubrication and roller guides in the X-axis flatway, as well as air lift-off in the grinding headstock. BEMA Standard Equipment: - Digital readout in 2 axes. X-axis resolution: 0.5 μm - Grinding spindle speed display - Infinitely variable grinding spindle speed 70–100% - Infinitely variable internal grinding spindle speed 70–100% - Workpiece spindle drive powered by three-phase motor, infinitely variable via frequency converter Available options at extra cost: - Encoder with digital display in workpiece headstock - Encoder with digital display in grinding headstock (height adjustment via spindle not possible) - Sine bar - New robust internal grinding attachment, 80 mm or 100 mm diameter, with height adjustment - Increase center height to max. 225 mm Nedped Ih D Eefx Ahcsdb - Speed control for the grinding spindle Included: - Operating tools - Draw tube for chuck Of course, our fully overhauled machines come with a 12-month warranty (valid in neighboring countries only). Further accessories on request. The machine tool does not currently comply with the essential health and safety requirements as set out in BetrSichV 2015. An assessment of the necessary minimum protection level must be determined by a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Gamybos metai: 2025, Apžvalga Tunelinis pasterizatorius, skirtas nuolatiniam terminiam apdorojimui, naudojant vandens purškimą, skirtas pildytoms skardinėms ir buteliams. Tunelis turi U formą: įleidimo ir išleidimo angos yra tame pačiame mašinos gale, todėl linija veda atgal link operatoriaus, o įrengimo plotas, kurio darbinis paviršius yra 6,2 m², išlieka kompaktiškas. Apdorojimo linija padalinta į aštuonias zonas – tris šildymo zonas, vieną išankstinio pasterizavimo zoną, pasterizavimo zoną ir tris aušinimo zonas, – o zonų tarpe vyksta energijos regeneravimas, todėl aušinimo zonoje pašalintas šilumos kiekis vėl grąžinamas į šildymo zoną. Šildymas vyksta naudojant garą, per plokštelinį šilumokaitį, kuris yra pritvirtintas tunelio šone. Produktas įleidžiamas esant +10 °C temperatūrai, pasterizavimo zonoje 10 minučių palaikoma +70 °C temperatūra ir išleidžiamas iš įrenginio esant +37 °C; visas ciklas trunka 41 minutę. Tunelio korpusas ir valdymo spinta yra visiškai pagaminti iš nerūdijančio plieno AISI 304. Valdymas vyksta per „Siemens S7-1200“ su 12 colių „Siemens HMI“ jutikliniu ekranu, kuriame rodoma visa proceso schema su zonų temperatūromis. Pagaminimo metai – 2025, naujas. Techniniai duomenys - Pagaminimo metai: 2025, naujas - Talpa: 2 400 butelių per valandą, 500 ml, skersmuo 53 mm - Talpa: 1 800 butelių per valandą, 500 ml, skersmuo 70,3 mm - Talpa: 2 000 skardinių per valandą, 500 ml, skersmuo 66 mm - Talpų dydžiai: skardinės ir buteliai po 500 ml, 330 ml ir 200 ml - Pasterizavimo temperatūra: +70 °C, išlaikymo laikas 10 minučių - Produkto temperatūra: +10 °C įleidimo metu, +37 °C išleidimo metu - Bendras gamybos ciklas: 41 minutė - Zonos: 8 (3 x šildymas, 1 x išankstinis pasterizavimas, 1 x pasterizavimas, 3 x aušinimas) - Šildymas: garas, plokštelinis šilumokaitis, pritvirtintas tunelio šone - Garų poreikis: 143,6 °C esant 3,6 bar, 130 kg/val. esant stacionarioms sąlygoms, 170 kg per pirmąsias 30 minučių paleidimo metu - Vandens sąnaudos: 0,2–0,3 m³/val. esant stacionarioms sąlygoms - Suspaustas oras: 500–700 l/val. esant 6 bar - Bendras energijos sunaudojimas: 8 kW - Maitinimo įtampa: 400 V, 3 fazės, 50 Hz; valdymo įtampa 24 V nuolatinė srovė - Apsaugos klasė: IP 54 - Bendri matmenys: 6 500 x 2 200 x 2 200 mm (ilgis x plotis x aukštis) - Darbinis paviršius: 6,2 m², susideda iš vieno modulio - Konvejerio darbinis aukštis: 1 150 ± 50 mm - Medžiaga: nerūdijantis plienas AISI 304 Įranga - U formos tunelis, įleidimo ir išleidimo angos yra tame pačiame mašinos gale - Aštuonios temperatūrines zonos su šilumos regeneravimu tarp zonų - Plokštelinis šilumokaitis, skirtas šildyti garu, pritvirtintas tunelio šone - „Siemens S7-1200“ valdymo sistema - „Siemens 12“ colių HMI jutiklinis ekranas su proceso modeliavimu ir zonų temperatūromis - Valdymo spinta iš nerūdijančio plieno AISI 304 - Daugiaeilių tiekimo ir iškrovimo konvejeriai su „Movex“ konvejerio juosta - Sulenkiami tikrinimo dangčiai virš apdorojimo zonų - Purškimo juosta, einanti per visą tunelio ilgį Būklė ir prieinamumas - Nauja mašina, pagaminimo metai – 2025 - Galima įsigyti nuo 2027 m. kovo 1 d. - Vieta: Belgija Ndjdpfx Ahoz Eqdxscjb

Būklė: labai geros būklės (naudotas), Gamybos metai: 2003, PET Bottle Blow Moulding Machine Manufacturer: KRONES Model: CONTIFORM K781 Output: 12,000 bph Supplied with moulds for 1.5 L and 0.5 L bottles Nodsvddkvepfx Ahcedb Power: 150 kW Air requirements: 10 bar – 1,500 m³/h, 30 bar – 1,000 m³/h Set dimensions (blow moulder + preform feeder): 1,100 x 340 cm, h: 450 cm Blow moulder dimensions: 500 x 340 cm, h: 250 cm Preform feeder dimensions: 600 x 250 cm, h: 450 cm Air requirements: 10 bar – 1,500 m³/h, 30 bar – 1,000 m³/h Year of manufacture: 2003 Machine operation technical documentation included Condition: Very good

Būklė: labai geros būklės (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Parduodamas aukštos kokybės Renner RS Pro 22 sraigtinis kompresorius su integruotu šaldytuvo tipo oro džiovintuvu. Įrenginys pagamintas Vokietijoje, pasižymi aukšta kokybe ir idealiai tinka dirbtuvėms, stalių ar metalo apdirbimo cechams, pramonei bei servisams, kuriems reikalingas didelis suslėgto oro kiekis. Papildomai sumontuotas šaldytuvo tipo džiovintuvas užtikrina sausą ir švarų suslėgtą orą, kuris prailgina įrengimų ir pneumatinio įrankių tarnavimo laiką. Techniniai duomenys Gamintojas: Renner GmbH Modelis: RS Pro 22 Pagaminimo metai: 2019 Tipas: 3440 Variklio galia: 22 kW Įtampa: 400 V Dažnis: 50 Hz Fazės: 3~ Tiekiamo oro kiekis: 3 440 l/min Maks. darbinis slėgis: 10 bar Pagaminta Vokietijoje CE sertifikatas Komplektacija Sraigtinis kompresorius Integruotas šaldytuvo tipo oro džiovintuvas Garso izoliacinis korpusas Pramoninis atlikimas Trifazis prijungimas 400 V Lengvai prižiūrima konstrukcija Didelis oro našumas Tinka nuolatiniam darbui Pritaikymo sritys Staliaus dirbtuvės Medžio apdirbimo cechai Metalo gamybos įmonės Automobilių servisai Pramonė Amatų įmonės Pristatymo komplektas Renner RS Pro 22 sraigtinis kompresorius Šaldytuvo tipo oro džiovintuvas Priedai pagal pristatymo komplektą Būklė Naudota – tačiau mažai darbo valandų – žr. nuotrauką Atliktas alyvos keitimas Nauji pavaros diržai Pilnai veikiantis Matomi amžiui ir naudojimui būdingi pabraižymai Paruoštas eksploatacijai Įrenginys bus patikrintas prieš pardavimą. Perkant įmonėms naudotą įrangą, kurios pagaminimo metai yra 2009 ar senesni, garantija netaikoma. Techniniai duomenys ir komplektacija gali skirtis. Pasiliekama teisė keisti informaciją, klysti ar parduoti įrangą anksčiau. Visa informacija pateikta be garantijos. Ndjdezfi Dtopfx Ahceb

Gamybos metai: 2025, veikimo valandos: 220 h, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Machine Information: Year of Manufacture: 02/2025 Capacity: 60 kg Machine Weight: 360 kg Tempered Chocolate Production: 130 kg/h Connection: 16A CEE plug Dimensions: Width 900 mm, Depth 920 mm, Height 1550 mm Description: The tempering and enrobing machine model MAESTRIA60 is designed for tempering and enrobing all types of chocolate. Owing to its compact dimensions, the MAESTRIA60 tempering and enrobing machine is particularly suitable for versatile use in confined spaces. Continuous tempering is achieved by an auger in conjunction with a cooling unit, ensuring that the chocolate is always available ready for use at the correct temperature. Ndsdpfx Aow Ta Imshceb The machine features a heated dosing device controlled by a pneumatic three-way valve, enabling direct dosing into moulds for bars, pralines, and other products. By equipping the machine with the appropriate enrobing attachment, all confectionery products (partially or fully) can be coated.

Gamybos metai: 2015, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Technical data for the bale opener line for RDF, MSW, paper, cardboard: Manufacturer: Cross Wrap Oy Ltd., Siilinjärvi, Finland Model: BO 4000 Year of manufacture: 2015 Number of bales opened: 674 units Operating time: only 3 days, exclusively during commissioning of the entire plant upon initial installation Opening time: approx. 45 seconds per bale Bale dimensions (W x H x L): 1100 x 1100 x 1400–1900 mm Max. bale weight: 2,000 kg Conveying height (system): 1,400 mm Max. conveyor width (system): 1,200 mm Njdezp H R Espfx Ahcjdb Materials to be opened: RDF/MSW System availability: 98% Noise level of bale opener line: 85 dB(A) Total connected load: 37 kW Rated current: 125 A Operator display: SIEMENS SIMATIC HMI Touch Control system: SIEMENS S7 ET200S Installation dimensions: 8,463 x 2,890 x 3,960 mm (L x W x H) Scope of supply: - Feeding conveyor: 3,500 x 1,200 x 1,400 mm - Infeed conveyor to opener: 1,500 x 1,200 x 1,400 mm - Bale opener (gripper with knife) Special equipment: - Oil heater in hydraulic oil tank - Control cabinet heating - Oil cooler for hydraulic unit Explanation regarding the short operating period: The complete Cross Wrap bale opener line, type BO 4000, was installed in 2015 at a municipal waste incineration plant. The background for installation was that, in the event of operational disruptions or maintenance of the incineration plant, municipal waste could continue to be accepted, compacted, wrapped, and stored until the disruption was resolved. Then, all the bales would be reopened and the waste would be fed back into the normal incineration process. This worst-case scenario never occurred. The system was installed, commissioned, and never used in regular operation afterwards. Only during commissioning and initial testing were 674 bales opened over three days in 2015. The system is in excellent, immediately operational condition. Due to modifications at the incineration plant, the installation area for the bale opener was needed, so the entire line is now available for sale. Brief description of the bale opening process: Pressed bales are placed on the infeed conveyor from the side or rear using a forklift. For opening, the bales must be oriented so that the wire or twine binding runs horizontally to the conveyor; otherwise, the bales must be rotated 90° beforehand. The opening conveyor moves one bale at a time in front of the cutting unit. The grippers secure the wires or twine. The rotating knife cuts the bale lengthwise. Afterwards, the gripper returns to the home position. The opened bale is then conveyed to the discharge chute and falls onto the subsequent conveying system. Remarks: Original price of the entire plant: €296,000. Complete documentation (operating manual, CE declaration, electrical/hydraulic wiring diagrams) is available. The system has been dismantled into transportable units, stored, and is available at short notice for inspection and loading. No liability is assumed for the technical specifications or possible errors.

Gamybos metai: 2022, būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: TAG ARTENA-03722-1/11, The TAG Artena 16-channel weigher and filler is a fully automated multi-product weighing machine, designed for the precise tray portioning of loose, delicate small- and medium-sized fruit and vegetable products. The machine is integrated in the production line upstream of packaging and labelling equipment. Products are placed in bulk onto the weighing machine’s conveyor belt, where they are transferred to the feed belts with a dynamic hopper and then deposited into trays. Trays are automatically denested and distributed onto the indexed conveyor belt. During the 4-step filling process, trays are weighed in-line using patented technology. The machine is operated via a touch-screen control panel, providing a comprehensive overview of all machine functions. Key product and machine performance specifications are as follows: • Weighing and filling system for delicate fruits • Feed belts made from special soft material for stone fruit to prevent bruising • 8+8 multi-product weighing units • Additional quality assurance guaranteeing product shelf life thanks to reduced drops • Linear combinatory and/or counting logic • Dual three-way automatic basket/tray denester • Dual-lane, multi-format automatic tray/basket conveyor • Basket weight: from 300 grams up to 1,500 grams • Basket size: from 65x65xh25 mm up to 200x200xh110 mm • Basket shape: square, rectangular, or round • Multi-material basket: plastic, plastic-free, cardboard, and other possible materials • Easy-to-use touch screen control • User-friendly interface ready for in-line connectivity • Automatic format change Nedpoykam Djfx Ahcedb • Production statistics • Electrical connections for downstream machine synchronization • Button-type shell closure device • Two-channel to single-channel conveyor. Main construction features of the machine include: • Stainless steel frame • Sorting belt with dumping area for box overturning • 2 product feeding elevator belts • 8+8 multi-product weighing units (patented system) • Shell-type closure device • Multi-format automatic tray denester • Motorised food-grade PU conveyor belts • Tray diverters • Conveyor movement in “synchronous step” with product flow, managed by sensors and microcontrollers • Conveyor operating logic managed by microcontroller and dedicated TAG software • Electrical connections for downstream synchronization (flowpack or other equipment) • Power supply: 220V 50Hz, 2.5 kW consumption • Compressed air circuit with minimum pressure of 7 bar • Wired internet connection for remote support All line management and control functions are operated via a tablet supplied with the machine, which serves as the HMI and operator panel on board. Thanks to the 3D graphical interface and 10” touch screen, use is highly intuitive.

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2025, mašinos/transporto priemonės numeris: ZGDS-125, darbinis plotis: 1 250 mm, Lenkimo kampas (maks.): 165 °, plieno lakšto storis (maks.): 7 mm, aliuminio lakšto storis (maks.): 1 mm, žalvario lakšto storis (maks.): 1 mm, vario lakšto storis (maks.): 1 mm, bendras svoris: 130 kg, bendras ilgis: 1 600 mm, bendras aukštis: 1 100 mm, garantijos trukmė: 24 mėnesiai, gaminio ilgis (maks.): 1 250 mm, eigos ilgis: 100 mm, A segment bending machine for sheet metal, also commonly referred to as a folder or box and pan brake, is designed for producing complex profiles and bends that cannot be achieved with a standard roofing folder. The segmented construction of the beams provides extensive capabilities for bending even the most advanced sheet metal shapes. We offer segment bending machines in three working lengths. Our segmented sheet metal benders are tailored for roofers, suitable for standing seam work as well as for bending KARO tiles. In the ZGDS series segment bending machines, all three rows of fingers—clamping beam, bending beam, and fixed beam—are removable and adjustable. SEGMENT BENDING MACHINE FOR SHEET METAL Ju9fautx Nedpfx Ahernmv Dscjdb MODEL ZGDS-1125 WORKING LENGTH: 1250 MM ALL THREE ROWS OF SEGMENTS REMOVABLE AND ADJUSTABLE MAXIMUM STEEL SHEET BENDING THICKNESS: 0.7 MM MACHINE WEIGHT: 125 KG.