Kraussmaffei Kmd-50 K pirkti naudotą (63 146)

Gamybos metai: 2002, būklė: paruoštas naudoti (naudotas), Clamping force: 2500 kN, clear tie bar distance: 630 mm/630 mm, opening stroke: 1150 mm, min. mould installation height: 330 mm, screw diameter: 60 mm, specific injection pressure: 2000 bar, max. shot volume: 670 cm³, connected load: 74 kW, control: MC4. Machine dimensions: 5700 mm/2200 mm/2300 mm, machine weight: 12.5 t, operating hours: 47,572 h. Available from February 2025, including special accessories: Krauss Maffei LRX-S 100, 8 hot runner control zones, 4 core pulls, blow unit, accumulator, hydraulic tie bar puller, energy-saving circuit, ALS interface, 20mA interface, and colour dosing device interface. On-site inspection possible, documentation available. Lrjdpfsuiykdjx Ahcot

Gamybos metai: 1998, būklė: paruoštas naudoti (naudotas), Clamping force: 1500 kN, screw diameter: 50 mm, tie bar spacing: 500 mm, platen dimensions X/Y: 780 mm / 790 mm, opening stroke: 600 mm, daylight: 900 mm, ejector stroke: 150 mm, shot volume: 305 cm³, shot weight: 278 g, injection pressure: 2336 bar. Machine dimensions X/Y/Z: approx. 4700 mm / 1550 mm / 2200 mm, weight: approx. 7000 kg, control system: MC4. Including Sepro handling. Documentation available. On-site inspection possible. Lodpfsw Hthzjx Ahcjrt

Būklė: paruoštas naudoti (naudotas), Šis liejimo įpurškimo aparatas priklauso hidromechaninei dviejų plokščių serijai, uždarymo jėga: 550 t, eksploatavimo laikas: apie 80 val., komplektuojamas su „Krauss Maffei KM 250/LRX-S 250“ manipuliatoriumi. Galima apžiūrėti vietoje, aparatas yra Meksikoje. Lrodpfxjzrn Hme Ahcet

Gamybos metai: 2010, būklė: paruoštas naudoti (naudotas), Galima įsigyti visiškai hidraulinį didelio formato dviaukštį įpurškimo liejimo automatą „Krauss Maffei“ su tiesiniu robotu LRX350. Užspaudimo jėga: 6500 kN, įpurškimo agregatas: SP3000, sraigtinės veleno skersmuo: 70 mm, L/D santykis: 22,9, maks. įpurškimo slėgis: 2389 bar, darbinis tūris: 1232 cm³, įpurškimo svoris: 1121 g, įpurškimo srautas: 462 cm³/s, sraigtinės veleno apsisukimų dažnis: 285 aps./min., plastifikacijos našumas: 108,6 g/s, antgalio užspaudimo jėga: 129 kN, įrankio atidarymo jėga: 345 kN, įrankio atidarymo kelias: 1150 mm, min. įrankio montavimo aukštis: 600 mm, maks. atidarymo plotis: 1750 mm, išstūmimo kelias: 250 mm, išstūmimo jėga: 95 kN, maks. įrankio svoris: 11400 kg, atidaros plotis: 1200 mm / 1120 mm, tvirtinimo plokštės matmenys X/Y: 1510 mm / 1370 mm. Roboto apkrova: 35 kg, judėjimo diapazonas X/Y/Z: 1200 mm / 2000 mm / 4000 mm, konvejerio matmenys X/Y: 2500 mm / 800 mm, padėjimo aukštis: 1000 mm, maks. juostos temperatūra: 70 °C. Automato matmenys X/Y/Z: apie 8000 mm / 3000 mm / 2700 mm, svoris: apie 31 t, veikimo valandos: apie 75900 val. Dokumentacija yra. Galima atlikti apžiūrą vietoje. Tikimasi, kad prietaisas bus prieinamas nuo 2026 m. lapkričio mėn. Lrsdpfx Aozqfwyshcot

Būklė: naudotas, Krauss Maffei SE502 MC4 valdymo blokas – išimtas iš KM 18 C3 - išimtas iš veikiančios mašinos - visiškai veikiantis Gamintojas: Krauss Maffei Lrjdjrr Eh Aspfx Ahcet Tipas: SE502 Atsarginės dalies nr.: 5 Būklė: naudota

Būklė: naudotas, Krauss Maffei SR 500 kompiuterinė kortelė MC3F valdymui – MC3F vykdymo valdikliui Ledorr Ehqopfx Ahcsrt - išimta iš veikiančios mašinos - visiškai veikianti Gamintojas: Krauss Maffei Tipas: SR500/310 Atsarginės dalies numeris: 5 Būklė: naudota

Būklė: naudotas, Krauss Maffei IPC 5-133 skirta MC4 valdikliui – išimta iš KM, netestuota. Gamintojas: Krauss Maffei Atsarginės dalies nr.: 5 Būklė: naudota Lrsdperr Egwefx Ahcet

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 500 kN, varžto skersmuo: 135 mm, tarpas tarp stulpų: 1 140 mm, išstūmimo eiga: 300 mm, TECHNICAL DETAILS Clamping force: 8,500 kN Mold opening force: 560 kN Platen dimensions (h x v): 1,600 mm x 1,600 mm Tie bar distance (h x v): 1,140 mm x 1,140 mm Mold open daylight: 1,600 mm Mold height (min-max): 500 mm – 1,100 mm Maximum daylight opening: 2,100 mm Ejector stroke: 300 mm Ejector force: 200 kN / 100 kN Lrjdpfey T Hmksx Ahcot Screw diameter: 135 mm Injection pressure: 1,389 bar Shot volume: 8,588 cm³ Shot weight for PS: 6,098 g Injection rate: 1,414 cm³/s MACHINE DETAILS Electro-hydraulic equipment Pump motor rated power: 132 kW Dry cycle time according to Euromap 6: 965 1/h Oil tank capacity: 2,440 l Open nozzle with nozzle radius: 25 mm Nozzle orifice: 9 mm Dimensions & Weight Installation space (L x W x H): 11.72 m x 2.92 m x 2.71 m Net weight with control unit: 49 t EQUIPMENT Krauss Maffei LRX 500 robot MC 5 control system with color monitor Integrated operator panel and USB memory stick Complete plasticizing unit for thermoplastics Non-return valve

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 9 500 kN, varžto skersmuo: 120 mm, išstūmimo eiga: 300 mm, atvērimo eiga: 1 900 mm, TECHNINĖS DETALĖS Uždarymo jėga: 9 500 kN Atidarymo jėga: 665 kN Stulpelių atstumas: 1 400 x 1 150 mm Tvirtinimo plokštės: 1 960 x 1 710 mm Atidarymo eiga: 1 900 mm Min. formos aukštis: 500 mm Maks. formos aukštis: 1 200 mm Maks. atidarymo plotis: 2 400 mm Išstūmimo eiga: 300 mm Aukštos našumo sraigtas HPS-UN, skersmuo: 120 mm Antgalio spindulys: 30 mm Antgalio anga: 12 mm Lsdpfjy T H A Eox Ahcsrt Sraigto skersmuo: 120 mm Lietinio svoris (HDPE): 5 420 g Lietimo tūris: 7 634 cm³ Specifinis įpurškimo slėgis: 2 257 bar ĮRANGOS DUOMENYS Matmenys ir svoris Matmenys (I x P x A): 12 770 x 3 420 x 2 750 mm Įrenginio svoris: 61,5 t

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, veikimo valandos: 70 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 000 kN, varžto skersmuo: 90 mm, tarpas tarp stulpų: 1 000 mm, įpurškimo slėgis: 1 742 juosta, atvērimo eiga: 2 000 mm, TECHNINĖS DETALĖS Sandarumo jėga: 8 000 kN Maksimali įrankio atidarymo jėga: 356 kN Judančios atidarymo plokštės padavimo jėga: 98 kN Judančios uždarymo plokštės jėga: 92 kN Plokštės dydis (A x P): 1 610 mm x 1 530 mm Stulpelių tarpai (A x P): 1 120 mm x 1 000 mm Įrankio atidarymo eiga: 1 400 mm Minimali įrankio aukštis: 600 mm Ledpjxup Nnofx Ahcert Didžiausias atidarymas: 2 000 mm Hidraulinio išstūmėjo eiga: 250 mm Sraigto diametras: 90 mm L/D santykis: 23 Įpurškimo slėgis: 1 742 bar Įpurškimo tūris: 2 863 cm³ Šūvio svoris (PS): 2 605 g MAŠINOS DETALĖS Išmatavimai ir svoris Išmatavimai (I x P x A): 10 500 x 2 860 x 2 890 mm Svoris: 43 000 kg Veikimo valandos: 70 000 h

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 9 500 kN, varžto skersmuo: 120 mm, išstūmimo eiga: 300 mm, atvērimo eiga: 1 900 mm, TECHNINĖS DETALĖS Lredexup Sispfx Ahcst Uždarymo jėga: 9 500 kN Atidarymo jėga: 665 kN Stulpelių atstumas: 1 400 x 1 150 mm Tvirtinimo plokštės: 1 960 x 1 710 mm Atidarymo eiga: 1 900 mm Min. formos aukštis: 500 mm Maks. formos aukštis: 1 200 mm Maks. atidarymo plotis: 2 400 mm Išstūmimo eiga: 300 mm Aukštos našumo sraigtas HPS-UN, skersmuo: 120 mm Antgalio spindulys: 30 mm Antgalio anga: 12 mm Sraigto skersmuo: 120 mm Lietinio svoris (HDPE): 5 420 g Lietimo tūris: 7 634 cm³ Specifinis įpurškimo slėgis: 2 257 bar ĮRANGOS DUOMENYS Matmenys ir svoris Matmenys (I x P x A): 12 770 x 3 420 x 2 750 mm Įrenginio svoris: 61,5 t

Būklė: naudotas, Gamybos metai: 2010, Injection moulding machine Krauss Maffei KM 650-4300, year 2010 Lodpow Hwthjfx Ahcjrt

Būklė: geras (naudotas), Gamybos metai: 2011, Ref. no.: 18586 Manufacturer: KRAUSS MAFFEI Model: KM180-750 AX All Electric Year of manufacture: 2011 Clamping unit Clamping force: 180 tons Opening stroke: 1050 mm Tie bar spacing (H x V): 560 × 510 mm Min. mold height: 200 mm Max. mold height: 600 mm Platen size (H x V): 790 × 740 mm Injection unit Screw diameter: 50 mm Shot volume: 393 cm³ Shot weight PS: 357 g Injection pressure: 1892 bar Lrsdpfx Ahow E E Evocjt Dimensions and weights Dimensions LxWxH: 6.07 x 1.92 x 2.01 m Machine weight: 6500 kg Additional information: 👉 Fully electric machine offering maximum precision, minimal energy consumption, and highest process stability. This machine is part of the proven AX series from KraussMaffei, renowned for its robust design, high performance, and reliability in industrial production. With a clamping force of 180 tons, the machine is ideally suited for a wide range of technical plastic applications, including automotive, packaging, and general industrial products. Key features: * Solid and durable construction for long-term use * High injection performance and process stability * Reliable KraussMaffei MC5 control system * Suitable for continuous industrial operation * Good spare parts availability The machine is equipped with a KraussMaffei linear robot (LRX-S100), enabling efficient and automated part removal, thereby increasing productivity and reducing cycle times. Thanks to its balanced performance and flexibility, this machine offers a very attractive solution for both technical component manufacturing and series production. The machine was manufactured in 2011 and, as shown in the pictures, is in good and fully functional condition.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2011, veikimo valandos: 28 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 300 kN, For sale is a KraussMaffei hybrid injection moulding machine, 2-component model, type KM 130-750 CX. The machine is in very good condition, immediately operational, and has low operating hours. It features electronic injection and dosing units, as well as a hydraulic clamping unit. Technical data: Year of manufacture: 2011 Operating hours: 28,000 h Clamping force: 130 t Cylinder Ø 30 mm / 40 mm (plus 2x 50 mm additionally included) Core pull: 1x hydraulic Needle shut-off: pneumatic Tie-bar extension: 160 mm Cavity pressure transducer Lodpfx Aou Hxm Ujhcsrt Selector valve Transport and loading can be organised across Europe for an additional charge upon request. All prices are subject to VAT. Inspection possible by appointment. Please contact us – our team will be happy to assist you. Trade-in or exchange is possible! Machinery purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, visit our website.

Būklė: naudotas, Gamybos metai: 2005, Technical details: Screw diameter: 90 mm Lredetunccjpfx Ahcjt Shot weight in polystyrene: 1,758 g/PS Clamping force: 6,500 kN Approx. machine weight: 32 t From serial production

Būklė: naujas, Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 61036936, spaudimo jėga: 800 kN, varžto skersmuo: 35 mm, darbinio tūrio: 135 cm³, įpurškimo slėgis: 1 837 juosta, injekcijos svoris: 123 g, formos aukštis (min.): 150 mm, išmetimo jėga: 22 000 N, išstūmimo eiga: 100 mm, atvērimo eiga: 750 mm, įrengimo aukštis: 400 mm, bendras ilgis: 4 750 mm, bendras plotis: 1 670 mm, bendras aukštis: 1 820 mm, bendras svoris: 5 900 kg, šildymo galia: 8,9 kW (12,10 AG), pavaros tipas: Vollelektrisch, laisvas tarpatramis: 470 mm, įrankio svoris: 600 000 g, Injection moulding machines direct from the manufacturer! As manufacturer KraussMaffei, we offer you our certified and versatile stock machines: The base injection moulding machine, precisionMolding, provides the perfect entry-level solution for all-electric injection moulding, enabling you to respond quickly and innovatively to market demands. It combines high performance, straightforward operation, and short delivery times. This machine is suitable for a wide range of applications, including the packaging industry, electrical and electronics sector, medical technology, and automotive industry. Your benefits: – Optimised price-performance ratio for a broad spectrum of applications – High energy efficiency thanks to an all-electric machine concept – Fast delivery times through the base machine concept with a wide range of options TECHNICAL DATA: KM 80 / 250 PA G01 (Order 38670013) (Machine no.: 61036936, new, year 2023) CONTROL SYSTEM  MC P1 with 15" TFT colour screen featuring multi-touch capabilities CLAMPING UNIT  Clamping force kN 800  Max. mould opening force kN 120  Daylight (h x v) mm 470 x 420  Mounting platens (h x v) mm 610 x 560  Minimum – Maximum mould height mm 150 – 400  Max. opening width mm 750  Max. mould opening stroke mm 350  Ejector drive electric  Ejector stroke mm 100  Ejector force forward/back kN 22 / 22  Ejector speed forward/back mm/s 300 / 300  Max. mould weight kg 600 INJECTION UNIT  Screw diameter / type mm 35 / Standard  Effective L/D ratio 20.0  Injection pressure bar 1837  Stroke volume cm³ 135  Shot weight at max. stroke (PS) g 123  Injection speed mm/s 200  Injection flow rate cm³/s 192  Screw drive/speed 1/min 382  Plasticising rate (standard screw)4) g/s 19.5  Nozzle contact force kN 30 ELECTRICAL PARAMETERS  Connected load kW 17.8  Installed heating capacity kW 8.9 Lrsdpjuggb Dsfx Ahcot  Power supply V / Hz 400 / 50 3-phase with neutral WEIGHT AND DIMENSIONS  Net weight with control cabinet t 5.9  Length x Width x Height m 4.75 x 1.67 x 1.82 ADDITIONAL EQUIPMENT  Wear-resistant plasticising  BluePower full insulation for plasticising cylinder  Open nozzle  Air valve 1-fold (BWAP)  Pneumatic control hot runner shut-off 1-fold  Electrical interface for cascade control 4-fold  Electrical preparation for hydraulic auxiliary unit  Euromap interfaces for handling E18, E63  Euromap interface (central computer) E67, E77  Water manifold 4-fold  Automatic central lubrication  Adaptive Process Control (APC)  Injection-compression moulding function  Graphics analysis package  Swivelling device for injection unit The machine is located at our site in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, Clamping Unit: Clamping Force: 6,500 kN Max. Mold Opening Force: 346 kN Moving Platen Opening Force: 169 kN Moving Platen Closing Force: 144 kN Mounting Platen (H x V): 1520 x 1470 mm Lrodpfjv Stbmex Ahcjt Clearance Between Tie Bars (H x V): 1000 x 930 mm Mold Opening Stroke: 1,150 mm Minimum Mold Installation Height: 675 mm Maximum Daylight Opening: 1,825 mm Ejector Stroke: 135 mm Ejector Force Forward/Return: 226 kN Injection Unit: Screw Diameter: 70 mm L/D Ratio: 23 Injection Pressure: 2,389 bar Shot Volume: 1,097 ccm Shot Weight (PS): 998 g Injection Flow Rate: 393 ccm/s Screw Speed: 218 rpm Plasticizing Rate: 83 g/s Nozzle Contact Force: 173 kN Electrohydraulic Equipment: Rated Pump Motor Power: 75 kW Installed Heating Capacity: 36 kW Cylinder Heating Control Zones: 7 Dimensions and Weight: Space Requirement Approx.: 8.70 x 2.90 x 2.80 m Total Weight: 44,000 kg Accessories: Oscillating Mounts Additional Equipment: - 1 x Air Valve - 8-fold Pneumatic Cascade Control - Accumulator - 2 x Hydraulic Core Pulls on Moving Platen - 2 x Hydraulic Core Pulls on Fixed Platen - Robot Interface according to EUROMAP 67

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 58 670 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 600 kN, varžto skersmuo: 45 mm, darbinio tūrio: 318 cm³, Clamping force: 1600 kN Maximum mold opening force: 87 kN Movable platen opening force: 45 kN Movable platen closing force: 38 kN Clamping platen (h x v): 820 x 845 mm Clearance between tie bars (h x v): 520 x 520 mm Mold opening stroke: 650 mm Minimum mold installation height: 300 mm Maximum daylight: 950 mm Ejector stroke: 150 mm Ejector force, forward/back: 23 kN Injection unit: Screw diameter: 45 mm L/D ratio: 22.4 Lsdpeydp Idjfx Ahcert Injection pressure: 2336 bar Shot volume: 318 cc Shot weight (PS): 289 g Injection flow rate: 143 cc/s Screw speed: 265 rpm Plasticizing rate: 29.3 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating capacity: 16 kW Cylinder heating control zones: 5 Oil capacity: 489 l Dimensions and weights: Space requirement approx.: 5.00 x 2.00 x 2.20 m Total weight: 6600 kg Max. mold weight: 1862 kg Accessories: - Oscillation elements - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 1500 mm C: 0 – 90° Additional equipment: - 1 x air valve - 2 x hydraulic core pulls - 6 x hot runner control zones - Robot interface according to Euromap 67

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, veikimo valandos: 60 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 9 500 kN, varžto skersmuo: 105 mm, tarpas tarp stulpų: 1 400 mm, darbinio tūrio: 4 546 cm³, įpurškimo slėgis: 1 778 juosta, injekcijos svoris: 4 137 g, Uždarymo jėga: 950 kN Didžiausia formos atidarymo jėga: 665 kN Judamos platformos atidarymo važiavimo jėga: 112 kN Judamos platformos uždarymo važiavimo jėga: 117 kN Tvirtinimo plokštė (plotis x aukštis): 1960 x 1710 mm Laikymo atstumas (plotis x aukštis): 1400 x 1150 mm Formos atidarymo eiga: 1800 mm Min./maks. formos montavimo aukštis: 600/1200 mm Atidarymo plotis: 2400 mm Įpurškimo mazgas: Sraigto skersmuo: 105 mm Ls/D santykis: 23 Įpurškimo slėgis: 1778 bar Smūgio tūris: 4546 ccm Įpurškimo svoris (PS): 4137 g Įpurškimo debitas: 805 ccm/s Sraigto apsukų dažnis: 126 1/min Plastifikacijos srautas: 147 g/s Antgalio spaudimo jėga: 166 kN Elektrohibridinės įrangos duomenys: Vardinė siurblio variklio galia: 110 kW Įdiegta šildymo galia: 59 kW Cilindro šildymo reguliavimo zonos: 7 Alyvos kiekis: 1500 l Matmenys ir svoris: Reikalinga erdvė apie: 12,00 x 3,50 x 3,00 m Lsdjx Hz I Nspfx Ahcert Bendras svoris: 67 000 kg Maksimalus formos svoris: 20 300 kg

Būklė: labai geros būklės (naudotas), Gamybos metai: 2012, veikimo valandos: 25 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 8 500 kN, varžto skersmuo: 95 mm, darbinio tūrio: 3 367 cm³, Clamping force: 8,500 kN Maximum mold opening force: 560 kN Moving platen opening force: 153 kN Moving platen closing force: 117 kN Clamping platen (H x V): 1,600 x 1,600 mm Clear width (H x V): 1,140 x 1,140 mm Lrjdpfx Aoyb Sx Hohcet Mold opening stroke: 1,600 mm Mold installation height min./max.: 500 / 1,100 mm Opening distance: 2,100 mm Ejector stroke: 300 mm Ejector force forward/backward: 200 / 100 kN Injection unit: Screw diameter: 95 mm L/D ratio: 23 Injection pressure: 1,795 bar Shot volume: 3,367 cc Shot weight (PS): 3,064 g Injection flow rate: 690 cc/s Screw speed: 116 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electrohydraulic equipment: Rated power of pump motor: 90 kW Installed heating capacity: 53 kW Cylinder heating control zones: 7 Oil capacity: 1,500 l Dimensions and weights: Space requirement approx.: 11.00 x 3.00 x 2.60 m Total weight: 43,000 kg Max. mold weight: 12,200 kg Accessories: - Vibration dampers Additional equipment: - 1 x air valve - 4 x hydraulic core pulls - 12 x hydraulic cascades - 2 x 12-circuit water manifold - Robot interface to Euromap 67

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2007, veikimo valandos: 70 000 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 6 500 kN, varžto skersmuo: 95 mm, darbinio tūrio: 3 367 cm³, Clamping force: 6500 kN Maximum tool opening force: 346 kN Moving platen travel force opening: 169 kN Moving platen travel force closing: 144 kN Clamping platen (H x V): 1520 x 1470 mm Clearance between tie bars (H x V): 1000 x 930 mm Mould opening stroke: 1150 mm Minimum mould installation height: 600 mm Maximum opening width: 1750 mm Ejector stroke: 250 mm Ejector force fwd/rev: 95 kN Lredpjx Hzzcefx Ahcet Injection unit: Screw diameter: 95 mm Ls/D ratio: 23 Injection pressure: 1795 bar Shot volume: 3367 ccm Shot weight (PS): 3064 g Injection flow: 690 ccm/s Screw speed: 153 rpm Plasticizing rate: 104 g/s Nozzle contact force: 166 kN Electro-hydraulic equipment: Pump motor rated power: 90 kW Installed heating capacity: 50 kW Number of cylinder heating control zones: 7 Dimensions and weights: Space requirement approx.: 9.83 x 2.90 x 2.80 m Total weight: 43,170 kg Accessories: - Anti-vibration mounting elements - Krauss Maffei Robot LR300 X-axis: 1200 mm, servo-driven Y-axis: 1000/1000 mm, telescopic, servo-driven Z-axis: 3500 mm, servo-driven C-axis: 0–90° pneumatic - Conveyor belt - Safety guarding Additional equipment: - 1 x air valve - 6-fold pneumatic cascade control - 12 x hot runner controllers - 2 x hydraulic core pulls on moving platen - 2 x hydraulic core pulls on fixed platen

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, veikimo valandos: 68 590 h, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 1 600 kN, varžto skersmuo: 50 mm, darbinio tūrio: 393 cm³, Clamping force: 1600 kN Max. tool opening force: 87 kN Moving platen opening force: 45 kN Moving platen closing force: 38 kN Clamping platen (h x v): 820 x 845 mm Clear daylight (h x v): 520 x 520 mm Mould opening stroke: 650 mm Minimum mould installation height: 300 mm Opening width: 950 mm Ejector stroke: 150 mm Ejector force (forward/back): 23 kN Injection unit: Lrjdpfxoydp D Ej Ahcst Screw diameter: 50 mm L/D ratio: 20 Injection pressure: 1892 bar Shot volume: 393 ccm Shot weight (PS): 358 g Injection flow rate: 177 ccm/s Screw speed: 265 rpm Plasticising throughput: 36.2 g/s Nozzle contact force: 50 kN Electrohydraulic equipment: Rated pump motor power: 22 kW Installed heating capacity: 16 kW Cylinder heating control zones: 5 Oil capacity: 489 ltr. Dimensions and weights: Space required approx.: 5.50 x 2.00 x 2.20 m Total weight: 6600 kg Max. mould weight: 1862 kg Accessories: - Oscillation elements - Krauss Maffei Robot LR 100 X: 550 mm Y: 1200 mm Z: 2500 mm C: 0-90° Additional equipment: - 1 x air valve - 2 x core pulls - Robot interface according to Euromap 67

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1997, Stock No. 13602 Manufacturer: Krauss Maffei Machine Type: KM 650 – 8000 CM Year of Manufacture: 1997 Operating Hours: 80,000 h Control System: MC 3-F Screen Language: German Location: D-52249 Eschweiler Clamping Unit: Clamping Force: 6,500 kN Max. Mold Opening Force: 346 kN Moving Platen Opening Force: 169 kN Moving Platen Closing Force: 144 kN Mounting Plate (H x V): 1704 x 1700 mm Clearance Between Tie Bars (H x V): 930 x 930 mm Mold Opening Stroke: 1,150 mm Min. Mold Installation Height: 600 mm Daylight: 1,750 mm Ejector Stroke: 250 mm Ejector Force fwd/back: 226 kN Injection Unit: Screw Diameter: 130 mm L/D Ratio: 20 Injection Pressure: 1,296 bar Shot Volume: 6,172 cc Shot Weight (PS): 5,617 g Injection Flow Rate: 1,540 cc/s Screw Speed: 138 rpm Plasticizing Rate: 238 g/s Lrjdpfx Aoub S R Hohcjt Nozzle Contact Force: 246 kN Electrohydraulic Equipment: Rated Pump Motor Power: 132 kW Installed Heating Capacity: 70 kW Cylinder Heating Zones: 7 Dimensions and Weight: Space Requirement approx.: 12.00 x 2.80 x 2.70 m Total Weight: 43,000 kg Accessories: - Vibration dampers Additional Equipment: - 1 x air valve - 2 x hydraulic core pulls on moving platen (BFAP) - 2 x hydraulic core pulls on fixed platen (FFAP) - 8 x hot runner control zones - Robot interface as per Euromap 67

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2009, Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 6 500 kN, varžto skersmuo: 70 mm, įpurškimo slėgis: 2 389 juosta, išstūmimo eiga: 135 mm, atvērimo eiga: 1 825 mm, TECHNICAL DETAILS Clamping Unit Clamping force: 6,500 kN Maximum mold opening force: 346 kN Moving platen open force: 169 kN Moving platen close force: 144 kN Mounting platen (H x V): 1,520 x 1,470 mm Clear distance (H x V): 1,000 x 930 mm Mold opening stroke: 1,150 mm Minimum mold installation height: 675 mm Maximum opening distance: 1,825 mm Lredpfxsycqc Tj Ahcot Ejector stroke: 135 mm Ejector force (forward/backward): 226 kN Injection Unit Screw diameter: 70 mm L/D ratio: 23 Injection pressure: 2,389 bar Shot volume: 1,097 cm³ Shot weight (PS): 998 g Injection flow: 393 cm³/s Screw speed: 218 rpm Plasticising rate: 83 g/s Nozzle contact force: 173 kN MACHINE DETAILS Dimensions & Weight Space requirements approx.: 8.70 x 2.90 x 2.80 m Total weight: 44,000 kg Electro-Hydraulic Equipment Rated power of pump motor: 75 kW Installed heating power: 36 kW Cylinder heating control zones: 7 EQUIPMENT Swivel elements 1 x air valve 8-way pneumatic cascade control Pressure accumulator 2 x hydraulic core pulls on BWAP 2 x hydraulic core pulls on FWAP Robot interface according to EUROMAP 67

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2004, Krauss-Maffei KM 650-3500 C 1 650 ton Krauss-Maffei injection moulding machine, year 2004, with only approx. 45,000 hours in automatic operation. The machine is supplied fully overhauled. OVERHAULED MACHINE Features: 6 pneumatic cascade controls, 24 hot runner zones, 1 core pull on the fixed and 1 core pull on the moving platen. Electric screw drive. Technical Details CLAMPING FORCE: 6,500 kN PLATEN SIZE: 1,540 x 1,440 mm DAYLIGHT BETWEEN PLATENS: 1,110 x 960 mm MOULD OPENING STROKE: 1,150 mm MAX. OPENING DISTANCE: 1,750 mm SCREW DIAMETER: 90 mm MIN. MOULD HEIGHT: 600 mm YEAR OF MANUFACTURE: 2004 INJECTION VOLUME: 1,953 cm³ SHOT WEIGHT: 1,777 g INJECTION PRESSURE: 1,742 bar Lodpfshy Nnbsx Ahcsrt