Kk Kletzer Schweißtisch Sst 80/16Xsl Ø28 Fix 1980X1480 pirkti naudotą (23 233)

Būklė: naujas, Total power requirement: 11 kW Frame gap: 3050 mm Pressure: 125 t Bending length: 3050 mm Number of axes: 3 Approximate weight: 9600 kg Dimensions (LxWxH): 3660 x 1340 x 2400 mm Stroke: 200 mm Backgauge: 500 mm Table height: 900 mm Oil tank capacity: 120 L Iaodehutz Sjpfx Aausr Press brake control unit: Esa S 640 CNC with 15" 2D graphic touchscreen display Control panel: Swiveling pendant arm Optional hydraulic press brake safety valve: With CE safety signals Press brake safety PLC: Mcs PLC safety programmable logic controller Press brake laser safety system: Dsp-Ap safety block (manual laser height adjustment) Backgauge for press brake: X-axis, 500 mm travel, including 2 fingers, manually adjustable in height and lateral position. Backgauge fingers: Standard Top tool clamping for press brake: Manual European type L: 150 mm (Promecam) Press brake upper tool: Eurostamp 1260 / Standard (835 mm and 805 mm, split into 595 mm and 210 mm) Lower die holder for press brake: Mechanical European standard width (Promecam) Press brake crowning: CNC adjustable motorized crowning (V-axis) Press brake lower die: Eurostamp 2067 / Standard (835 mm and 805 mm, split into 100 mm left, 395 mm, 210 mm, and 100 mm right) Press brake operation Front supports for press brake: 2 supports, manually adjustable in height and lateral position. Electrical system: 380 V–660 V, 50–60 Hz, 3-phase (IE3) Control cabinet cooling: Ventilation with fan Number of foot pedals: One Label group: English label group

Būklė: naujas, Stroke length (max.): max. 400 mm Table height: Floor to top edge of table 850 mm Installation height: 600 mm Speeds: Advance 120 mm, Pressing 13 – 4 mm, Return 170 mm/sec Pump capacity: 65 L/min (REXROTH – axial piston pump) Motor: 15 kW – 1500 rpm Dimensions (LxWxH): 2,100 x 2,400 x 4,300 mm Weight approx.: 11,000 kg Capacity: 1,500 kN (150 tons at 245 BAR) Operation Mode: Selection via key switch - Manual / setup mode via two-hand control without light sensor safety on the front (rear side always active) - Automatic mode via two-hand operation at full speed (with active light sensor safety) Main cylinder: Ø 270 mm Auxiliary cylinders: 2 pcs. Ø 70 x 50 mm Motor: 15 kW – 1500 rpm (IE-3) Pump: 45 cc, 65 L/min, REXROTH – axial piston pump Speed: Advance 120 mm – Pressing 13–4 mm – Return 170 mm/sec Clear width: 1300 mm Iaedsmpfwdopfx Aauor Table plate: 1200 x 800 x 90 mm, with T-slots Ram plate: 1200 x 800 x 600 mm, with T-slots & reinforcement ribs Installation height: 600 mm (max. distance between table & ram plate) Stroke length: max. 400 mm Table height: 850 mm (floor to top edge of table) ----- Hydraulics: (Hydraulic accessories located on top of press) Control block & valves (REXROTH proportional valves) Pre-fill valve (NG.125) 8-fold guide system Hydraulic ram safety device Mechanical ram safety at upper dead center Pressure adjustment via PLC Speed adjustment via PLC Pressure hold valve for 600 sec Air cooler Automatic lubrication for guideways Auxiliary motor Auxiliary pump Control system: Main control cabinet (mounted lateral to the press frame) Swiveling operator panel SIEMENS S7 – 1200 KTP 9” SIEMENS touchscreen (language selection DE / ENG) Safety PLC (SICK) Light curtain for front & rear of work area (SICK 750 + 150 mm.) Soft starter Movable two-hand operation SECOMEA Ethernet connection Linear measuring system for stroke length adjustment (450 mm – NOVOTECHNIK 16BIT) Work Area Lighting (2x IP-66) - 8 free PLC I/O ports for external connections ----- - Safety guard around hydraulics - Side access ladder ----- Documentation: Operating manual GERMAN (1 copy paper & 1 copy USB) Hydraulic & electrical diagrams Parts lists CE certificate Standard: EN 16092/1/3 ----- Overall dimensions: approx. 2,400 x 2,100 x 4,100 mm Total weight: approx. 11,000 kg Painting: Frame RAL 7035 light grey

Būklė: naujas, Pressure: 100 Oil Tank Capacity: 120 Bending Capacity (Flat Material): 320 x 24 Bending Capacity (Round Tubes): 114 x 10 Pressure: 285 Working Speed: 10 Return Speed: 10 Motor: 10 Table Surface: 750 x 1425 Working Height: 930 Length: 1430 Width: 750 Height: 1450 Approx. Weight: 1700 Stroke: 285 UZMA hydraulic horizontal presses with multi-directional functionality enable a wide range of operations such as bending, punching, straightening, etc., for pipes, flat bars, profiles, rods, and all types of materials. The quick tool change system allows you to bend materials like sheet metal, pipes, profiles, and bars quickly and efficiently with matching dies, minimizing downtime. The versatility of operation and user-friendly controls set UZMA apart. A horizontal press is an indispensable machine for metalworking shops. Standard Accessories: - Standard accessories - Steel frame and robust machine design - Stroke adjustment with digital display Iaodpfx Asr I H Axsaujr - Manual or automatic working mode - Easy tool change with quick-change system - Durable construction of tools and guides, made of high-quality, hardened steel - Foot pedal with digital display and emergency stop - 1 set of press brake tools

Būklė: naujas, Oil tank capacity: 12 Bending capacity (flat material): 200 x 12 Bending capacity (round tubes): 48 x 4.0 Pressure: 20 Working speed: 10 Return speed: 10 Motor: 2.2 Table size: 480 x 1060 Working height: 930 Length: 1150 Width: 480 Height: 1200 Stroke: 185 Weight approx.: 530 UZMA hydraulic horizontal presses with multi-directional functionality allow you to carry out a wide variety of operations such as bending, punching, straightening, etc. on pipes, flat bars, profiles, rods—as well as all types of materials. Thanks to the quick-change tooling system, you can bend materials such as sheet metal, pipes, profiles, and bars with the appropriate dies without losing time. UZMA stands out for its versatile operation and ease of use. The horizontal press machine is an indispensable tool for metalworking shops. Standard Accessories: - Standard accessories - Steel frame and robust machine design - Stroke adjustment via digital display - Manual or automatic operation - Easy tool change via quick-change system - Durable tools and guides made from high-quality, hardened steel - Foot pedal with digital display and emergency stop - 1 set of press brake tooling Iasdpfx Aor I H A Asausr

Būklė: naujas, Oil Tank Capacity: 40 Bending Capacity (Flat Material): 200 x 18 Bending Capacity (Round Tube): 60 x 4.0 Pressure: 30 Working Speed: 10 Return Speed: 10 Motor: 3 Table Size: 660 x 1250 Working Height: 930 Length: 1250 Width: 650 Height: 1250 Stroke: 285 Approx. Weight: 1050 kg UZMA Hydraulic Horizontal Presses with multi-directional functionality enable a wide range of operations on pipes, flat bars, profiles, rods, and all kinds of materials, such as bending, punching, straightening, and more. Thanks to the rapid tool change system, you can quickly bend materials including metal sheets, pipes, profiles, and rods with suitable dies efficiently and without loss of time. Versatile operation and user-friendly controls are key features of UZMA. The horizontal press machine is an indispensable tool for metalworking shops. Standard Accessories: - Standard set of accessories - Steel frame and robust machine design - Stroke adjustment via digital display - Manual or automatic operating system - Easy tool change with quick-change system - Durable construction for tools and tool guides made from high-quality hardened steel - Foot pedal with digital display and emergency stop Iaedpfx Aor I H A Hsauor - 1 set of press brake tooling

Būklė: naujas, Oil tank capacity: 40 Bending capacity (flat material): 200 x 18 Bending capacity (round tubes): 60 x 4.0 Pressure: 40 Working speed: 10 Return speed: 10 Motor: 3 Table surface: 660 x 1250 Working height: 930 Length: 1250 Width: 650 Height: 1250 Stroke: 285 UZMA hydraulic horizontal presses with multidirectional functionality allow a wide range of operations including bending, punching, straightening, etc. on pipes, flat bars, profiles, rods, and all types of materials. Thanks to the quick tool change system, materials such as sheet metal, pipes, profiles, and bars can be quickly bent with the appropriate dies without any loss of time. UZMA stands out for its versatile operating functions and ease of use. A horizontal press machine is an indispensable piece of equipment for metalworking shops. Standard Accessories: - Standard accessories - Steel frame and robust machine design - Stroke adjustment via digital display - Manual or automatic operating system - Easy tool change with quick-change system Iajdpfxjr I H A Rs Aausr - Durable construction of tools and tool guides made from high-quality, hardened steel - Foot pedal with digital display and emergency stop - 1 set of bending tools

Būklė: naujas, Oil tank capacity: 60 Bending capacity (flat material): 300 x 15 Bending capacity (round tubes): 76 x 4.0 Pressure: 50 Working speed: 10 Return speed: 10 Motor: 5.5 Table size: 600 x 1250 Working height: 930 Length: 1400 Width: 600 Height: 1500 Stroke: 285 Weight approx.: 1050 UZMA hydraulic horizontal presses with multi-directional functionality for pipes, flat bars, profiles, rods, and all types of materials, allow for a wide variety of operations such as bending, punching, straightening, etc. The quick tool change system enables rapid bending of sheet metal, tubes, profiles, and rods using suitable tooling with minimal downtime. UZMA stands out for its versatile operation functions and ease of use. A horizontal press machine is an indispensable piece of equipment for metalworking shops. Iedpfsr I H A Usx Aauoar Standard Accessories: - Standard accessories - Steel frame and robust machine design - Stroke adjustment via digital display - Manual or automatic operation - Easy tool change with quick-change system - Durable tool and guide construction made from high-quality, hardened steel - Foot pedal with digital display and emergency stop - 1 set of press brake tooling

Būklė: naujas, Sheet length: 3,200 mm Sheet thickness: 6.0 mm Total power requirement: 7.5 kW Weight approx.: 5,100 kg Dimensions (LxWxH): 3,800 x 1,750 x 1,700 mm Our robust brand KKKletzer CNC GUILLOTINE SHEAR, swing-cut design, Model SWT has everything you need for cutting. We have also raised the standard for our swing-cut models and now supply our guillotine shears with automatic blade gap adjustment via the E21S touchscreen control at no extra charge. Technical data: Sheet thickness: 6 mm Cutting length: 3,200 mm Cutting angle: 1.5 ° Motor power: 7.5 kW Strokes per minute: 12 Length: 3,800 mm Width: 1,750 mm Height: 1,700 mm Weight: 5,100 kg • Rigid swing-cut design Blade gap adjustment via control unit - Backgauge - Blade gap - Cutting length • Ball screw spindles for the backgauge • Ball supports in the table We have many references! Iajdpfjnwt A Asx Aauor

Būklė: naujas, Sheet length: 3060 mm Iaedpfsd Egqxox Aauer Sheet thickness: 20.0 mm Total power requirement: 37 kW Approx. weight: 21.5 t Dimensions (LxWxH): 3910x3395x2640 mm Our strong brand KKI CNC GUILLOTINE SHEAR oscillating design Model AS 3020 features everything needed for perfect cutting. CNC oscillating-guided guillotine shear KKI Thanks to robust and durable mechanics and hydraulics, a precise backgauge with ball screw drive, and user-friendly CNC control, Dener guillotine shears are highly efficient production machines. Shears for sheet thicknesses from 6 mm up to 20 mm and cutting lengths of 3 to 6 m are part of our standard portfolio. Naturally, greater sheet thicknesses and cutting lengths are also available upon customer request. Dener guillotine shears owe their long service life to their particularly rugged design with a fully welded frame. The entire machine body, the cutting beam, and the backgauge are resistant to torsion and deformation, thereby enabling the highest cut quality. By entering the sheet thickness and material type, the CNC control automatically calculates and sets the required cutting angle and gap. Our strong brand KKI CNC GUILLOTINE SHEAR oscillating design Model AS 3020 has everything needed for perfect cutting. Technological advantages: - Fast and precise cuts - Stable, durable frame construction - Automatic blade gap adjustment - Simple operation - Low maintenance costs - High safety standard - Use of components from renowned manufacturers - Low unit costs Our Strong Brand KKI CNC GUILLOTINE SHEAR oscillating design Model AS 3013 provides everything needed for perfect cutting. With our patented blade support system, we can finely adjust and stabilize the upper blade, ensuring precise, high-quality cuts. This prevents so-called banana cuts. Technical Data: Sheet thickness: 20 mm Cutting length: 3,060 mm Cutting angle: 0.5 - 3° Number of hold-downs: 16 Backgauge: 1,000 mm CNC-controlled Motor power: 37 kW Cutting speed (0.5 - 3°): 12-5 (cuts/min) Throat depth: 350 mm Oil tank: 750 liters Length: 3,910 mm Width: 2,370 / 3,395 mm Height: 2,640 mm Weight: 21,500 kg • Oscillating-beam design • CNC control - Backgauge - Cutting angle - Blade gap - Cutting length • Ball screw drives for the backgauge • Ball transfer table • Side gauge 1,500 mm • 2 support arms, each 1,000 mm • Cutting line illumination • Flip-up finger guard to 1,000 mm We have many references!

Būklė: naujas, Sheet length: 6125 mm Sheet thickness: 16.0 mm Total power requirement: 45 kW Weight approx.: 49,500 kg Dimensions (LxWxH): 7200 x 3700 x 2780 mm Our strong brand KKI CNC GUILLOTINE SHEAR Slide Guide Version Model AS 6016 offers everything required for perfect cutting. CNC slide-guided guillotine shear by KKI: Thanks to robust, long-lasting mechanical and hydraulic systems, a precise back gauge with ball screw, and a user-friendly CNC control, Dener guillotine shears are highly efficient production machines. Our standard portfolio includes shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 m to 6 m. Custom options for greater thicknesses and cutting lengths are available upon request. Dener guillotine shears owe their long service life to their particularly sturdy construction with a fully welded frame. The entire machine body, cutting beam, and back gauge are highly resistant to torsion and deformation, ensuring the highest cut quality. By inputting the sheet thickness and material type, the CNC control automatically calculates the required cutting angle and blade gap. Our strong brand KKI CNC GUILLOTINE SHEAR Slide Guide Version Model AS 6016 offers everything required for perfect cutting. Technological advantages: - Fast and precise cuts - Stable, durable frame construction - Automatic blade gap adjustment - Easy operation - Low maintenance costs - High safety standards - Integration of renowned manufacturers’ components - Low unit costs Our strong brand KKI CNC GUILLOTINE SHEAR Slide Guide Version Model AS 6016 offers everything required for perfect cutting. With our patented blade support system, we are able to finely adjust and stabilize the upper blade to ensure precise, high-quality cuts. Unwanted banana-shaped cuts are thereby prevented. Technical data: Sheet thickness: 16 mm Cutting length: 6,125 mm Cutting angle: 0.5 to 2.5 degrees Number of hold-downs: 31 Back gauge: 1,000 mm via CNC Motor power: 45 kW Cutting speed (0.5 - 2.5°): 10–5 cuts/min Throat depth: 350 mm Oil tank: 750 liters Iasdpfx Aaed Ehh Aoujr Length: 7,200 mm Width: 2,550 / 3,700 mm Height: 2,780 mm Weight: 49,500 kg • Slide guide design • CNC control for: - Back gauge - Cutting angle - Blade gap - Cutting length • Ball screw for back gauge • Ball transfer table • 1,500 mm side gauge • 2 support arms, 1,000 mm each • Cutting line illumination • 1,000 mm flip-up finger guard Optional pneumatic sheet support, EUR 12,650,-- We have many reference customers!

Būklė: naujas, Sheet length: 6125 mm Sheet thickness: 6.0 mm Total power requirement: 11 kW Weight approx.: 22,000 kg Dimensions (LxWxH): 6910 x 3610 x 2780 mm Our powerful brand KKI CNC GUILLOTINE SHEAR, swing beam design, Model AS 6006, provides everything you need for perfect cutting. CNC swing beam guillotine shear KKI Thanks to its robust and durable mechanical and hydraulic components, precise ball-screw rear gauge, and user-friendly CNC control system, Dener guillotine shears are highly efficient production machines. Shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters are part of our standard portfolio. Of course, higher sheet thicknesses and longer cutting lengths can be provided upon customer request. Dener guillotine shears owe their long service life to their particularly robust, fully-welded frame construction. The entire machine body, cutting beam, and backgauge are resistant to torsion and deformation, ensuring the highest cut quality. By entering sheet thickness and material type, the CNC control automatically calculates the required cutting angle and gap. Our strong brand KKI CNC GUILLOTINE SHEAR, model AS 6006, offers everything required for perfect cutting. Technological Advantages: - Fast and precise cuts - Sturdy, durable frame construction - Automatic blade gap adjustment - Simple operation - Low maintenance costs - High safety standards - Use of components from renowned manufacturers - Low unit costs Our strong brand KKI CNC GUILLOTINE SHEAR, swing beam design, model AS 6006, offers everything you need for perfect cutting. With our patented blade support system, the upper blade can be finely adjusted and stabilized, ensuring precise, high-quality cuts and preventing so-called banana cuts. Technical Data: - Sheet thickness: 6 mm - Cutting length: 6,125 mm - Cutting angle: 0.5 – 2.5° - Number of hold-downs: 31 - Backgauge: 1,000 mm via CNC - Motor power: 11 kW - Cutting speed (0.5–2.5°): 14–6 (cuts/min) - Throat: 350 mm - Oil tank: 475 liters - Length: 6910 mm - Width: 2200 / 3610 mm - Height: 2780 mm - Weight: 22,000 kg • Swing beam design • CNC control system for: - Backgauge - Cutting angle - Blade gap - Cutting length Iaedpfxod Ehh He Aauer • Ball screws for backgauge • Ball transfers in the table • Side gauge 1,500 mm • 2 support arms, each 1,000 mm • Cutting line illumination • Fingershield, foldable up to 1,000 mm Optional pneumatic sheet support, EURO 12,650 We have many references available!

Būklė: naujas, Sheet length: 4065 mm Sheet thickness: 16.0 mm Total power requirement: 30 kW Approximate weight: 21,000 kg Dimensions (LxWxH): 4930 x 3300 x 2220 mm Our strong brand: KKI CNC GUILLOTINE SHEAR, swinging beam design Model AS 4016 offers everything you need for perfect cutting operations. CNC Swing Beam Guillotine Shear – KKI Thanks to robust and durable mechanics and hydraulics, a precise backgauge with ball screw drive, and a user-friendly CNC control unit, Dener guillotine shears are highly effective production machines. Shears for sheet thicknesses from 6 mm to 20 mm and cutting lengths from 3 to 6 meters are part of our standard portfolio. Of course, higher sheet thicknesses and cutting lengths are also available on customer request. Dener guillotine shears owe their long service life to their exceptionally sturdy construction with a fully welded frame. The entire machine frame, cutting beam, and backgauge are resistant to torsion and deformation, ensuring the highest cutting quality. By entering the sheet thickness and material type, the CNC controller automatically calculates the required cutting angle and cutting gap. Our strong brand: KKI CNC GUILLOTINE SHEAR, swinging beam design Model AS 4016 has everything required for perfect cutting. Technological advantages: - Fast and precise cuts - Stable, durable frame construction - Automatic gap adjustment Iajdpfxed Ehh Ns Aausr - Simple operation - Low maintenance costs - High safety standard - Use of components from renowned manufacturers - Low unit costs Our strong brand KKI CNC GUILLOTINE SHEAR - Swing Beam Design Model AS 4016 provides all you need for optimal cutting results. With our patented blade support system, we can finely adjust and stabilize the upper blade, ensuring precise high-quality cuts and preventing so-called banana cuts. Technical Data: - Sheet thickness: 16 mm - Cutting length: 4,065 mm - Cutting angle: 0.5° to 3° - Number of hold-downs: 26 - Backgauge: 1,000 mm through CNC - Motor power: 30 kW - Cutting speed (0.5 – 3°): 13–6 cuts/min - Throat depth: 350 mm - Oil tank: 400 liters - Length: 4,930 mm - Width: 2,300 / 3,300 mm - Height: 2,220 mm - Weight: 21,000 kg • Swing beam design • CNC controller (for backgauge, cutting angle, cutting gap, and cutting length) • Ball screw backgauge • Ball transfers in the table • Side gauge 1,500 mm • 2 support arms, each 1,000 mm • Cutting line illumination • 1,000 mm swing-away finger guard Optional pneumatic sheet support: €8,420 We have numerous references!

Būklė: naujas, Sheet length: 4120 mm Sheet thickness: 6.0 mm Total power requirement: 11 kW Weight approx.: 8,000 kg Dimensions (LxWxH): 4,890 x 2,750 x 1,820 mm Our robust brand KK kletzer NC GUILLOTINE SHEAR, oscillating cut design Model BS offers everything you need for sheet cutting. Technological advantages: - Fast and precise cuts - Stable, durable frame construction - Simple operation - Low maintenance costs - High safety standard - Use of components from renowned manufacturers - Low unit costs Technical data: Sheet thickness: 6 mm Cutting length: 4,160 mm Cutting angle: 1.33° Number of hold-downs: 19 Backgauge: 1,000 mm (CNC controlled) Iajdpfx Aed Eqrgoaujr Motor power: 11 kW Cutting speed: 14 cuts/min Throat depth: 150 mm Hydraulic tank: 240 litres Length: 4,890 mm Width: 2,050 / 2,745 mm Height: 1,820 mm Weight: 8,000 kg • Robust oscillating cut design Adjustment of blade gap via the control system - Backgauge - Blade gap - Cutting length • Ball screw drive for the backgauge • Ball transfer table • Side stop, 1,500 mm • 2 support arms, each 1,000 mm • Cutting line illumination • 1,000 mm foldable finger guard Optional pneumatic sheet support system, EUR 8,420 We have numerous references!

Būklė: naujas, Sheet length: 3120 mm Sheet thickness: 6.0 mm Total power requirement: 11 kW Weight approx.: 6500 kg Dimensions (LxWxH): 3850 x 2750 x 1700 mm Our powerful brand KK Kletzer NC GUILLOTINE SHEAR (Swing Beam Design) Model BS has everything you need for cutting. NC guided guillotine shear KKI Technological advantages: - Fast and precise cuts - Stable, durable frame construction - Easy operation - Low maintenance costs - High safety standard - Use of components from renowned manufacturers - Low unit costs Technical data: Sheet thickness: 6 mm Cut length: 3,120 mm Isdped Eqrmofx Aaujar Cutting angle: 1.39° Number of hold-downs: 15 Backgauge: 1,000 mm CNC-controlled Motor power: 11 kW Cutting speed: 18 cuts/min Throat depth: 150 mm Oil tank: 200 liters Length: 3,060 mm Width: 2,050 / 2,745 mm Height: 1,700 mm Weight: 6,500 kg • Stable swing beam design - Blade gap adjustment via the control - Backgauge - Blade gap - Cut length • Ball screw spindles for the backgauge • Balls in the table • Side gauge 1,500 mm • 2 support arms, 1,000 mm each • Cutting line illumination • 1,000 mm swing-up finger guard Optional pneumatic sheet support, EURO 5,500 We have many references!

Būklė: naujas, Sheet length: 2100 mm Sheet thickness: 6.0 mm Total power requirement: 11 kW Iodpfx Aofhlbdoauoar Weight approx.: 5500 kg Dimensions (LxWxH): 3110x2195x1770 mm Our robust brand KK Kletzer CNC GUILLOTINE SHEAR, oscillating cutting version, model SWT, has everything you need for cutting tasks. We have also raised the standard for the oscillating cut version and deliver all our shears with automatic blade gap adjustment via the ELGO P40T touchscreen control at no extra charge. NC link-guided guillotine shear KKI Technological Advantages: - Fast and precise cuts - Stable, durable frame construction - Automatic blade gap adjustment - Easy operation - Low maintenance costs - High safety standard - Use of components from renowned manufacturers - Low unit costs Technical specifications: Maximum sheet thickness: 6 mm Cutting length: 2,100 mm Cutting angle: 1.5° Number of hold-downs: 15 Back gauge: 1,000 mm, CNC-controlled Motor power: 11 kW Strokes per minute: 18 Throat depth: 50 mm Oil tank capacity: 200 liters Length: 3110 mm Width: 2195 mm Height: 1770 mm Weight: 5500 kg • Sturdy oscillating cut design • Blade gap adjustment via control system - Back gauge - Blade gap - Cutting length • Ball screw spindle for back gauge • Balls in worktable • Side stop 1,500 mm • 2 support arms, 1,000 mm each • Cutting line illumination • Flip-up finger guard (up to 1,000 mm) Option: - Pneumatic sheet support, EURO 3,900.-- We have many references!

Būklė: naujas, Gamybos metai: 2020, Pressure: 135 Bending length: 3050 mm Iasdpfx Aaofnlqdousr Frame width: 2550 mm Installation height: 380 mm Stroke length (max.): 180 mm Throat depth: 250 mm Dimensions (LxWxH): 3760 x 2150 x 2450 mm Weight approx.: 6500 kg Motor power: 11 kW Standard equipment: KK-Industries GmbH has participated in production and is now manufacturing press brakes and guillotine shears according to its own specifications. We have assembled a high-quality model for Europe. The CNC press brake KK Kletzer Europa Compact, made in Bursa, Turkey Model: KK Kletzer Europa Compact The robust entry-level press brake KK Kletzer Europa Compact is characterized by its high precision, accuracy, and versatile application possibilities. We focus on quality, which is also reflected in the controller. As a standard controller, we use high-quality control systems from Cybelec with extremely simple programming. Furthermore, the KK Kletzer Europa Compact press brake is equipped with Y1, Y2, and X CNC axes, and crowning through the handwheel option CNC EURO 2,000. We also make no compromises on the upper tool and die, fitting the KK Kletzer Europa Compact CNC press brake with quality tooling from EUROSTAMP Italy or Rolleri Italy. Of course, every machine is only as good as its service. For this reason, we focus on highly qualified employees with extensive experience in CNC sheet metal processing. CNC axes: Y1, Y2, X Controller: Cybelec CybTouch 12 Cybelec CybTouch 12 Controller Simple operation, more efficient bending, and powerful features characterize the CybTouch 12 PS The Cybelec CybTouch™ 8 PS is specifically designed for synchronized press brakes. As part of the Cybelec CybTouch series, it features an intuitive touchscreen with vivid colors and an extremely high degree of function integration. More efficient bending - Various automatic bend sequence calculations. - Bend programs and products can be stored. - Management of bend angle, pressure, and crowning. - Simple manual operation. Powerful - Controls up to 4 axes - Optional 2D graphical profile creation with manual bend sequence - Calculation of bend allowance - Calculation for pressure and crowning - Modular tooling for every part or bend - Angle and backgauge correction Simple operation - Large, bright, and high-contrast full touchscreen - Clear pages, simple display, large buttons - Simple, user-friendly operation - Complete programming for efficient mass production with multiple bends - Simple single-part production via the Easy-Bend page - Online help and interactive warning hints - Convenient wireless data backup and software updates via PC or laptop - USB storage interface for data transfer/backup - Wide range of languages Backgauge with double linear guide and ball screw Centrally adjustable crowning system 2 front support arms adjustable on linear guides Laser safety device on the upper beam CE safety equipment Options: recommendations from KK

Būklė: naujas, Stroke (max.): max. 400 mm Table height: Floor to top of table 900 mm Installation height: 600 mm Speeds: approach 120 mm/s, pressing 13 – 4 mm/s, return 170 mm/s Pump capacity: 103 L/min (REXROTH axial piston pump) Motor: 22 kW – 1500 rpm Dimensions (LxWxH): 2000 x 3200 x 4300 mm Weight approx.: 10,000 kg Oil fill: 700 L Hydraulic Double Column Press 250 TON by KK Kletzer Capacity: 250 tons (at 245 bar) Operation: - Via key switch - Manual / setup mode via two-hand operation (without light sensor) - Automatic mode via two-hand operation at full speed with light sensor Main cylinder: Ø 350 mm Auxiliary cylinders: 2 pcs Ø 80 x 60 mm Motor: 22 kW – 45 HP Pump: 103 L/min REXROTH axial piston pump Speed: Approach 120 mm/s Pressing 13 – 4 mm/s Return 170 mm/s Clear width: 1100 mm Table plate: 1000 x 1000 mm, with T-slots Ram plate: 1000 x 1000 mm, with T-slots & spring welds Installation height: 600 mm (max. distance between table and ram plate) Stroke length: max. 400 mm Table height: 900 mm (floor to top of table) Hydraulics: Block & valves (REXROTH) (hydraulic components mounted on top of the press) Pre-fill valve Hydraulic & mechanical ram safety Pressure adjustment via PLC (min. pressure 35 tons) Speed adjustment via PLC Pressure hold valve for 600 seconds Air cooler (temperature control adjustable via display) Automatic guideway lubrication (adjustable via display) Work area protection with sheet metal side panels Guide rails for parallelism Iasdpfx Asgta Rcjauor Auxiliary motors: 5.5 kW + 2.2 kW Auxiliary pumps: 22 cc + 5.5 cc Safety guard around hydraulic unit and lateral climbing ladder Oil tank: 800 L Oil volume: approx. 700 L Control system: SIEMENS S7-1200 Main switch cabinet Swiveling operator panel Soft starter for main motor Safety PLC: SICK PLC display: 9'' Siemens Movable two-hand operation Digital length measuring system for stroke adjustment 450 mm (NOVOTECHNIK) Light sensors at front & rear of work area – SICK 900 + 150 mm SECOME & Ethernet interface for remote maintenance (Siemens) Work area lighting, 2x 8 free I/Os at the PLC Automatic pressure replenishment in case of loss Operating manual in German Hydraulic diagrams Control diagrams The price is approximate, as steel prices may vary.

Būklė: naujas, Pressure: 135 Bending length: 3200 mm Frame width: 2700 mm Installation height: 430 mm Stroke length (max.): 200 mm Throat depth: 400 mm Dimensions (LxWxH): 4200 x 1900 x 2700 mm Weight approx.: 9,700 kg Standard equipment: ----- CNC axes: Y1, Y2, X Backgauge with linear guide and ball screw spindle Sheet support arms with linear guide Laser safety device on upper beam Quick-release upper tool clamping Upper tool system: Promecam Amada, segmented, gooseneck 4-way Multi-V die system, compatible with both Promecam Amada and insert dies CE safety equipment, operating instructions in English Various options available KK-Industries GmbH Iaodjfrz Hyopfx Aaujr Something for everyone!

Būklė: naujas, Pressure: 40 Stroke: 500 Table surface: 700x500 Installation height: 600 Ijdpfxjwwx Ars Aausar Rapid traverse: 26 Working speed: 9 Motor: 4 Features: - Two-stage hydraulic pump – compactly integrated into the machine frame - Lever and push-button control – with secure two-hand operation - Cylinder stroke: 500 mm – suitable for a wide range of applications - Milled working table (lower) – robust and precisely machined - Two working speeds – for fast yet precise operation - Adjustable maximum pressure – individually adaptable depending on application - Integrated manometer – for precise monitoring of the working pressure

Būklė: naujas, Spaudimas: 100 t Eiga/min: 50 Stalo tvirtinimo paviršius: 600 x 780 mm Stūmoklio matmenys: 240 x 400 mm Eigos reguliavimas: 20–130 mm Stūmoklio reguliavimas: 100 mm Montavimo aukštis: 400 mm PK100 EKSCENTRYNĖ PRESA Talpa: 100 t Eiga/min: 50 spm (reguliuojama) Stalas: 780 x 600 mm Stūmoklis: 240 x 400 mm Eigos reguliavimas: 20–130 mm Iasdpfx Ajr I H Dgeauer Stūmoklio reguliavimas: 100 mm Montavimo aukštis: 400 mm Priedai: Valdymas: Siemens S7-1200 Ekranas: Siemens 9’’ Eigos ilgio reguliavimas Minimali & maksimali eigos nustatymas Automatinis centrinis tepimas Saugos PLC: PILZ arba SIEMENS Dvikanalė saugos valdiklio spinta Šviesos barjeras: SICK, PILZ arba LEUZE, 4 kat. CE sistema 2 vnt. saugos plokštelių Apatinė atraminė plokštė transportavimui Apatinis įsikišimo apsauga Pneumatinės sankabos ir stabdžių kombinacija

Būklė: naujas, Laser power: 2 kW Working width: 1500 mm Precision +/-: 0.05 mm Max. loading weight: 1,250 kg Dimensions (LxWxH): 11,200 x 3,500 x 2,560 mm Approx. weight: 10,000 kg Max. cutting thickness (aluminium): approx. 4 mm Max. cutting thickness (stainless steel): approx. 5 mm Max. cutting thickness (mild steel): approx. 14 mm The FLC series is a fast, precise, reliable, and cost-efficient fiber laser cutting machine. This is a high-efficiency laser cutting machine in the premium class segment. It can accommodate laser power up to 30,000 W, making it an excellent choice for cutting thick sheets. FLC fiber laser cutting machines are typically used for the processing of agricultural machinery, textile machines, food processing machines, construction machinery, elevators, and other large equipment and installations. It is the ideal cutting solution for anyone looking to outsource production. The wireless remote control allows for easy blowing, cutting, pausing, calibration simulation, etc. Standard nesting software quickly arranges parts to be cut, making them production-ready with minimal operator intervention. The system also features a fly-cutting function. Thanks to the dual pallet changer design, you can continue cutting without interruption. All of our machines are manufactured to European standards and carry CE certification. Our FLC model machines feature nozzle cleaning and a dual-camera system. Cutting table sizes available: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head features autofocus and active anti-collision function, as well as an auto-view function that detects obstacles and automatically repositions itself. Cutting heads are equipped with automatic cooling. The bridges we use in all our machines are made from welded aluminum alloy sheet construction and are one-piece. This single-piece design ensures bridge rigidity and prevents deformation from impact, overlap, or load. Furthermore, thanks to their structure, which is three times lighter than steel profile bridges, we achieve high speeds and accelerations with lower motor power requirements. Included accessories: - Water chiller - Control cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control panel - Fly-cutting capability - Nozzle and lens starter kit - Parts debris drawers Iaedpfx Asrtwqpeaujr - Automatic table changer - Automatic nozzle cleaning - CE compliance - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system

Būklė: naujas, Laser power: 4 kW Working area: 1500 x 3000 mm Load capacity: 1200 kg X-axis travel: 1520 mm y-axis travel: 3030 mm Positioning accuracy: 0.05 mm Repeatability: 0.03 mm Dimensions (LxWxH): 10,000 x 400 x 2,120 mm The FLC Series is a fast, sensitive, reliable, and cost-effective fiber laser cutting machine. It is a high-efficiency laser cutting machine meeting top-end standards. Capable of supporting up to 30,000 W laser power, it is an excellent choice for cutting thick plates. FLC fiber laser cutting machines are typically used in the manufacturing of agricultural machinery, textile machinery, food machinery, construction machinery, elevators, and other large machines and systems. It is an ideal cutting machine for those looking to outsource their cutting processes. Simple operations such as blowing, cutting, pausing, calibration simulation, etc., can be carried out easily with the wireless remote control. Standard nesting software enables quick and operator-free preparation of cut parts, making them ready for processing. It also features a fly-cutting function. As a dual shuttle table system, cutting can continue without waiting times. All our machines are manufactured according to European standards and come with a CE certificate. Our FLC models come equipped with nozzle cleaning and a dual camera system. Available cutting table sizes: 1.5 x 3 m, 2 x 4 m, or 2 x 6 m. Our laser head offers autofocus, active anti-collision, and Auto-View function, which detects obstacles and adjusts automatically. Cutting heads feature automatic cooling. The bridges used in all of our machines are a single-piece welded construction made from aluminum alloy sheets. This one-piece design ensures bridge rigidity and prevents deformation during shocks, overlaps, or mechanical loads. Additionally, due to their structure being three times lighter than steel bridge profiles, we achieve higher speeds and accelerations with reduced motor power. Included accessories: - Water chiller - Electrical cabinet cooling - Automatic focus head - Nesting software - 19-inch touch CNC control - Flying cut function - Nozzle and lens starter kit - Workpiece debris drawers - Automatic table changer - Automatic nozzle cleaning - CE conformity - On-site machine training - Wireless remote monitoring - Automatic lubrication system - Dual camera system SPECIFICATIONS VALUE Working area 1500 x 3000 mm Ijderuwazepfx Aaujar Load capacity 1200 kg XY-axis travel 1520 x 3030 mm Z-axis stroke 300 mm XYZ-axis guide 4-point ball cage XY-axis drive system Rack and pinion Z-axis drive system Ball screw XY-axis speed 100 m/min Z-axis speed 30 m/min XY positioning accuracy 0.05 mm XY repeatability 0.03 mm Table change time 10 s Laser source Raycus / Hans / JPT Laser source output power 2 / 3 / 4 / 6 / 8 / 12 / 20 kW CNC control system Fscut Laser cutting head Raytools / BOCI / WSX Supported gases Air/Oxygen/Nitrogen Cooling type Water-cooled Machine weight 12,000 kg Machine dimensions ...

Būklė: naujas, Bending length: 3050 mm Total power requirement: 15 kW Pressure: 200 t Number of axes: 3 Dimensions (LxWxH): 3680x1350x2500 mm Oil capacity: 210 liters Weight approx.: 8500 kg Press brake controller: Esa S 640 CNC 10 with 2D graphical display - touchscreen Controller operation panel: Swiveling pendant arm Optional hydraulic press brake valve: With CE safety signals Press brake safety PLC: Mcs PLC safety controller Press brake laser safety system: Dsp-Ap safety block (manual laser height adjustment) Backgauge for press brake: X-axis, 500 mm travel, including 2 fingers, manually adjustable in height and laterally. Stop fingers for backgauge: Standard Clamping system for press brake upper tool: Manual European type, L: 150 mm (Promecam) Iajdpshutz Iofx Aauer Press brake upper tool: Eurostamp 1260 / Standard (835 mm and 805 mm divided into 595 mm and 210 mm) Press brake lower die holder: Mechanical European type, standard width (Promecam) Press brake crowning: CNC adjustable motorized crowning (Y-axis) Press brake lower die: Eurostamp 2067 / Standard (835 mm and 805 mm divided into 100 mm left, 395 mm, 210 mm, and 100 mm right) Front support arms for press brake: 2 supports, manually adjustable in height and lateral position. Electrical system: 380 V-660 V, 50-60 Hz, 3 Ph (IE3 efficiency) Control cabinet cooling: Ventilation with fan Number of foot switches: One Label group: English label set Packaging method: Plastic cover with stretch film

Būklė: naujas, Motor power: 13.2 Stand width: 2700 mm Pressure: 200 g Bending length: 3200 mm Number of axes: 4 Dimensions (LxWxH): 3,700 x 1,700 x 2,700 mm Oil capacity: 200 Weight approx.: 14,000 kg Press brake control unit: Delem DA 58T 2D graphic display - touchscreen Control unit panel: Swiveling pendant arm Optional hydraulic press brake valve: With CE safety signals Press brake safety PLC: Mcs PLC safety PLC Press brake laser safety system: Dsp-Ap safety block (manual laser height adjustment) Backgauge for press brake: X-axis, 500 mm stroke, including 2 fingers, manual height and lateral adjustment. Backgauge stop fingers: Standard CNC crowning, adjustable and motorized (V-axis) Number of foot pedals: One Iaodpopblztofx Aauor Label group: Label group English

Būklė: naujas, Sheet length: 3200 mm Sheet thickness: 13.0 mm Total power requirement: 18 kW Weight approx.: 9.2 t Dimensions (LxWxH): 4000x1900x2350 mm Our strong brand KK Kletzer CNC GUILLOTINE SHEAR swing-beam version Model 3213 offers everything required for perfect cutting. CNC swing-beam guided guillotine shear KK Kletzer Thanks to robust and durable mechanics and hydraulics, a precise backgauge with ball screw, and user-friendly CNC control, KK Kletzer guillotine shears are highly efficient production machines. Shears for sheet thicknesses from 6 mm up to 20 mm and cutting lengths from 3 to 6 meters are part of our standard portfolio. On request, higher sheet thicknesses and cutting lengths are also possible. The long service life of our shears is due to their particularly robust, fully welded frame construction. The entire machine body, cutting beam, and backgauge are resistant to torsion and deformation, ensuring maximum cutting quality. By entering the sheet thickness and material type, the CNC controller automatically calculates the required cutting angle and gap. Our strong brand KK Kletzer CNC GUILLOTINE SHEAR swing-beam version Model 3213 offers everything needed for perfect cutting. Technological advantages: - Fast and precise cuts - Stable, durable frame construction - Automatic gap and angle adjustment - Easy operation - Low maintenance costs - High safety standard - Use of components from renowned manufacturers - Low unit costs Technical Data: Sheet thickness: 13 mm Cutting length: 3,280 mm Cutting angle: 0.3 - 2° Backgauge: 1,000 mm via CNC Motor power: 18 kW Length: 4,000 mm Width: 1,900 mm Height: 2,350 mm Weight: 9,200 kg • Swing-beam design • CNC control ELGO P 40 T - Backgauge - Cutting angle - Gap setting - Cutting length • Ball screws for backgauge • Ball tables • Side gauge • 2 support arms • 1,000 mm foldable finger guard We have many references! Iaedpfx Ajfl S Efjausr