Indumasch 200H pirkti naudotą (103)

Būklė: naudotas, Gamybos metai: 2004, Funkcionalumas: visiškai funkcionalus, For sale here are 4 units of fans with mounting plates and brackets. Fjdpfek Dz Enex Af Asgb These were installed in a York EC 200HP. The price is per fan.

Būklė: naudotas, Hydraulic Synchronizing Press, Die Spotting Press AGEO Type GHP 200 H6 4-Column Hydraulic Press, Tool Tryout Press, Die Spotting Press Serial No. 21169, Year of manufacture: 1993 Pressing force: 200 tons Clearance between uprights (front): 1200 mm Side passage between uprights: 650 mm Table size: 1560 x 1010 mm Ram area: 1560 x 1010 mm Ram stroke: 575 mm Drawing cushion stroke: 300 mm Drawing cushion holding force: 63 tons Drawing cushion ejector force: 30 tons Max. installation height: 775 mm Fedpfx Ajwva I Hsf Asgb Table height above floor: 1000 mm Guide column diameter: 140 mm Ram clamping bore: 64 mm Pressing speed: 0 to 10 mm/s infinitely variable Return speed: 0 to 20 mm/s infinitely variable Main motor power: 22 kW Control pump motor power: 5.5 kW Power connection: 400 Volt, 50 Hz - Table and ram with 22 mm T-slots - Two hydraulic cylinders with electronic precision synchronization control - Infinitely adjustable electric stroke limitation (top and bottom) with digital travel measurement and position display - Mechanical safety support (prevents ram from lowering due to gravity) - One-hand and two-hand operation - Electric tool safety device with signal contact - Pressure presetting independent of stroke (via keyboard with digital pressure display) - Position measuring system left and right via rotary encoder - Electric control: MS-DOS PC with Ageo H v2.23 controller software - Operator panel with swiveling monitor - Stroke movement and press speed controllable via joystick - Separate hydraulic unit with electrical cabinet - Hydraulic drawing cushion under the press table - Drawing cushion with ejector function - Continuous stroke control - Floor-level installation - Electric oil temperature monitoring - Operating manual with wiring diagrams Space required for the press upright (L x W x H): 1800 x 1010 x 3470 mm Space required for horizontal transport (L x W x H): 3500 x 1800 x 1200 mm Press net weight: 13 tons Space required for the hydraulic power unit (L x W x H): 1000 x 800 x 3040 mm Hydraulic power unit net weight: approx. 1 ton The machine was used as a tool tryout press in a toolmaking facility. Very good condition.

Būklė: naujas, ✔ Band sawmills ✔ Multi-blade saws ✔ Edgers ✔ Pallet board milling machines ✔ Wood cutters Why choose Boldrew? Fjdpfevvw R Tox Af Aogb ✅ Over 30 years of industry experience ✅ Professionalism and precision ✅ Customer service in Europe, America, and Africa We invite you to cooperate with us! Mobile Band Sawmill TS-1200 H Mobile Band Sawmill TS-1200 H Innovative technology for woodworking professionals The mobile band sawmill TS-1200 H is a technologically advanced machine designed for efficiency, precision, and reliability. Thanks to its mobility and modern hydraulic solutions, the machine meets the expectations of even the most demanding users. --- Technical Data ·Length of log to be cut: 100–820 cm Track bed: 6 meters, with an additional 4-meter-long hydraulically foldable segment ·Maximum log diameter: up to 950 mm ·Band saw wheels: Ø 600 mm Band saw blade: ·Length: 4800 mm ·Width: 40–50 mm ·Main drive: Briggs & Stratton Vanguard V-Twin 35 hp petrol engine ·Generator: 8 kW for powering additional components ·Head lift system: Dual-side 16B chain drive ·Feed control: Infinitely variable for maximum control ·Blade tensioning: Hydraulic ·Debarking device for initial log preparation ·ISP 10 cut thickness meter ·Electrically powered roller ·Adjustable angle supports (load capacity 600 kg each) ·LED lighting, ideal for work under various conditions --- Advanced Hydraulic Kit The efficient hydraulic system enables easy and fast log handling: ·Hydraulic support arms – for stabilizing the log during cutting ·Log loading – 2 single-acting cylinders for operator comfort ·Log leveling – 2 adjustment points ·Log clamping – 2 points for precise tensioning ·Log turner – 2 points, facilitates log maneuvering ·Hydraulic motor: 8-kW Briggs & Stratton petrol engine with high-efficiency hydraulic pump Mobility and Durability Mobile axle: Dual AL-KO with brake and height-adjustable tow bar Construction: Robust, resistant to tough working environments Transport: Easy thanks to a mobile chassis and compact dimensions Advantages of Trak A-1200 M 1. Versatility: Capable of cutting large logs of varying diameters and lengths 2. Mobility: Ideal for use at sawmills and directly on site 3. Efficiency: Rapid and precise cutting with modern hydraulic systems 4. Operator comfort: Intuitive controls and ergonomic solutions

Būklė: paruoštas naudoti (naudotas), IEC71L28-LC-FA2 series LC three-phase motor, water-cooled, 400V, 200 Hz, 12 kW, IP65, B5 flange version, centering diameter 110 mm, 4 x holes Ø 9 on 130 mm pitch circle, smooth shaft 28 x 6 x 60 mm, rated speed: 12,000 rpm, max. speed: 16,000 rpm, dynamically balanced, coolant connection M14 x 1.5, manufacturer unknown, used, normal signs of wear, 100% functional, scope of delivery as per pictures. Fodpfxei D Id Re Af Aegb

Būklė: paruoštas naudoti (naudotas), Schunk Gemotec CLM 200-H100 compact slide, SN: MK116609, used, normal signs of wear, 100% fully functional, scope of delivery as per photos. Fgodpjmz Ecwofx Af Aeb

Būklė: naudotas, rida: 1 001 km, pirmoji registracija: 01/2004, tuščias svoris: 360 kg, spalva: raudona, vairuotojo kabina: kitas, pavaros tipas: kitas, Gamybos metai: 2004, keliamoji galia: 1 350 kg,

Būklė: naujas, galia: 405 kW (550,65 AG), kuro tipas: dyzelinas, bendras svoris: 32 000 kg, ašių konfigūracija: 3 ašys, spalva: balta, pavaros tipas: automatinis, Įranga: ABS, autonominis šildytuvas, elektroninė stabilumo programa (ESP), navigacijos sistema, oro kondicionavimas, suodžių filtras,

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2006, X ašies eiga: 1 000 mm, Y ašies eiga: 1 500 mm, Z ašies eigos atstumas: 650 mm, stalo plotis: 1 140 mm, stalo ilgis: 1 640 mm, ruošinio ilgis (maks.): 1 770 mm, ruošinio plotis (maks.): 1 270 mm, ruošinio aukštis (maks.): 680 mm, padavimo greitis Z ašis: 12 m/min, stalo apkrova: 7 500 kg, Condition: completely overhauled Control: Mitsubishi - 64 bit CNC Generator capacity: 70 Amps - multipulse Travel paths (X, Y, Z): 1000 x 1500 x 650 mm Electrode changer: 30-fold pick-up disc changer Work tank (W x D x H): 1770 x 1270 x 680 mm Fgsdpfxoxpvhaj Af Ajb Workpiece clamping table (W x D): 1640 x 1140 mm Load capacity: 7,500 kg Equipment: - CO2 fire extinguishing system - Cartridge filter system - HSJ technology (High Speed Jump)

Būklė: naudotas, Gamybos metai: 2020,

Būklė: naudotas, Gamybos metai: 2018,

Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: GM1000.3200 H-323.41.6000.6E 130.20, Load capacity 3.2 t Reeving 4/1 Lifting height 9 m Lifting speeds 8/1.3 m/min Trolley travel speeds 20/5 m/min FEM class 3M Operating voltage 400 V Fodpfx Asvx E Ixsf Asgb Control voltage 230 V Flange width 300 mm Immediately available from stock

Gamybos metai: 2025, būklė: naujas, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: GM800.3200 H-202.41.6000.4E 100.20, Load capacity 3.2 t Reeving 4/1 Fjdpfx Afsvx E Ilo Asgb Lifting height 6 m Lifting speeds 5/0.8 m/min Trolley travel speeds 20/5 m/min FEM group 2M Operating voltage 400 V Control voltage 230 V Flange width 300 mm Immediately available from stock

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, galia: 4 kW (5,44 AG), pavaros tipas: hidrostatinis, kuro tipas: benzinas, Gamybos metai: 2004,

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2023, From our demonstration tool stock, tested and fully functional: New CHICAGO PNEUMATIC CP5080-4200H18K Universal and versatile belt sander set (new & unused) Fsdpfx Afev U Ad Ns Aogb with 3 different sanding arms: Abrasive belt width: 13 x 457 mm 16 to 19 x 475 mm 3 to 13 x 457 mm Scope of delivery: - CP5080-4200H18 belt sander - 1 x protective cover without handle - 1 x handle - 8 x sanding belts - 1 x sanding arm 13 x 457 mm - 1 x sanding arm 16 to 19 x 475 mm - 1 x sanding arm 3 to 13 x 457 mm - 1 x carrying case Benefits: - The sanding head can be rotated 360° to adapt to the working position - Easy change of abrasives and contact arm - Simple and robust design Technical data: - No-load speed: 20,000 rpm - Power: 400 W - Abrasive belt width: see scope of delivery above - Total length: 340 mm - Weight: 1.3 kg Other tools for industrial production and maintenance available on request.

Būklė: naudotas, Gamybos metai: 1997, Wheel diameter - max. 215 mm Wheel width 40.65 mm Module - max. Total power requirement 20 kW Machine weight approx. 10 t G L E A S O N (USA) CNC Grinding Machine for Spiral and Hypoid Bevel Gears Model PHOENIX HG 200 Year of construction 1997 Max. external diameter of workpiece: 215 mm Tooth profile size (height x width): 16 mm x 40.65 mm Number of teeth: 5 - 200 Maximum gear ratio: 1 : 10 Fjdpfx Ast Hwxhjf Aogb Grinding wheel diameter: 51-190 mm Grinding wheel speed: 1,000 – 6,000 rpm X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (sliding base): 304 mm Distance machine center to workpiece spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speeds: 0-30 rpm Workpiece spindle bore, tapered: 3 29/32 inches Total drive approx.: 20 kW - 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special equipment: • FANUC – 7-axis CNC control type 150 MB with monitor and direct data entry, automatic calculation of all workpiece and grinding parameters • Large, sophisticated coolant system with filtration, band filter, etc. • Powered grinding wheel dressing device with CNC-controlled compensation for wheel form and diameter after each dressing cycle • Gear grinding can be performed either as single part processing with conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. Grinding wheels can be made of CBN or conventional “dressable” aluminium oxide, depending on cost. Grinding with a conical wheel provides advantages in terms of heat management and contact pattern quality. Therefore, these bevel gear sets (automotive industry) can be manufactured in high quality, with consistent accuracy, cost-efficiently, and with short setup times. Please refer to the brochure copy on our website for additional details. Condition : very good – can be demonstrated under power Delivery : ex stock - as inspected Payment : strictly net – upon receipt of invoice We look forward to your order. Further gear manufacturing machines always in stock. X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (sliding base): 304 mm Distance machine center to workpiece spindle face: 115 mm Axis speed: 125 mm/sec Workpiece spindle speeds: 0-30 rpm Workpiece spindle bore, tapered: 3 29/32 inches Total drive approx.: 20 kW - 380 V – 50 Hz Weight approx.: 10,000 kg Accessories / Special equipment: - FANUC – 7-axis CNC control type 150 MB with monitor and direct data input, automatic calculation of all workpiece and grinding parameters - Large, sophisticated coolant system with filtration, band filter, etc. - Powered grinding wheel dressing unit with CNC dressing control for automatic form and diameter compensation after each dressing - Gear grinding can be performed either as single part processing with a conical cup wheel (Gleason 30°) or with a cylindrical cup wheel. These grinding wheels can be made of CBN or conventional dressable aluminum oxide wheels (cost dependent). Grinding with a conical grinding wheel...

Būklė: naujas, Table length 2400 mm Table width 1200 mm Load capacity 4000 kg Lifting height 510 - 1550 mm Total connected load 1.5 kW Connection voltage 400 V Machine weight approx. 0.95 t Welding table on lift table: Hole diameter: 28 mm The table is made of 15 mm thick S355 steel Fgodpjwz Rubjfx Af Aob The surface is pickled and oiled. Tolerance: Top +/- 1 mm and on the sides +/- 1 degree. Side panels 150 x 10 mm Underside ribbed for reinforcement.

Būklė: naudotas, Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 106546-11, bendras aukštis: 3 550 mm, bendras ilgis: 7 185 mm, bendras plotis: 4 720 mm, bendras svoris: 8 000 kg, The drilling method used by the deep hole drilling machine is single-lip (gun drilling). Drilling Unit Information: - Number of spindles: 1 - Spindle speed infinitely variable: 500 - 8,000 rpm - Spindle drive power: 11 kW at 60% duty cycle - Max. drilling depth: 1,000 mm (in one stroke without retraction) - Drilling diameter: 3 - 35 mm (based on ST 60) - Drilling diameter / indexable inserts: 40 mm - Max. thread tapping: M27 - Milling material removal rate: 250 ccm/min Travel: - X-axis travel: 1,050 mm - Y-axis travel: 600 mm - Z-axis travel: 800 mm - W-axis travel: 1,250 mm (with 2 steady rests) Travel Speeds: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 1,200 liters - 1x scraper belt chip conveyor - 1x screw conveyor system - 1x hydraulic and pneumatic power unit / equipment - 1x central lubrication system - 1x immersion pump: Pump output: 200 l/min - 1x low pressure pump: Pump output: 100 l/min Pump drive: 2.2 kW - 1x compact band filter: Filtration capacity: 175 l/min for machining steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Delivery rate: 2 - 120 l/min Pump drive: 11 kW - 1x air cooler (heat exchanger) 22.5 kW - 1x oil mist extraction unit, Suction capacity: 1,250 m³/h Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with tool holder SK 40 Tool Changer Magazine includes: - Tool magazine with intermediate gripper - Tool holder SK 40 - Max. permissible tool diameter: 80 mm - Max. permissible tool length: 250 mm - Number of tool stations: 80 - 2x swiveling tool steady rests for guiding and supporting long drilling tools, with automatic return to home position. Clamping Table with B-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - B-axis: 360° - Positioning accuracy B-axis: +/- 30 arcseconds - Table travel: 800 mm - Payload (central): 1,500 daN Electrical Equipment Information: - 1x CNC controller, Heidenhain iTNC 530 - 1x drilling process monitoring system - 1x RENISHAW probe Fgedpfjxdm Awex Af Aob Connection Data: - Operating voltage: 3AC 400V ± 10% - Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 26 kW

Būklė: naudotas, Gamybos metai: 1994, Naudotas dėžių formavimo įrenginys Ape 1994 Fgedpfevgupusx Af Ajb Naudotas dėžių formavimo įrenginys Ape 1994, gamintojas – APE Impianti. Modelis: Form 1200 HM, pagamintas 1994 metais. Šiuo metu įranga yra sandėlyje. Mašina turi saugos funkcijas ir yra su dokumentacija (vartotojo vadovais).

Būklė: labai geros būklės (naudotas), Gamybos metai: 1992, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 8 000 mm, Y ašies eiga: 5 400 mm, Z ašies eigos atstumas: 900 mm, padavimo ilgis W ašis: 900 mm, ašies skersmuo: 200 mm, W ašies eiga: 2 000 mm, stalo apkrova: 40 000 kg, stalo ilgis: 2 500 mm, stalo plotis: 2 000 mm, paskutinio kapitalinio remonto metai: 2022, galia: 140 kW (190,35 AG), Įranga: sūkių greitis be galo kintamas, Siūlome labai geros būklės Skoda Skoda W200H gręžimo stakles, pagamintas 1992 metais. Gamintojas: Skoda Modelis: Skoda W200H Gamybos metai: 1992 Fsdpfjymnv Sjx Af Ajgb Būklė: labai gera Kategorijos ID: 1601 Tipo ID: 1276 Tipas: Gręžimo staklės Jeigu turite klausimų arba reikia daugiau informacijos, siųskite mums žinutę arba paskambinkite.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2010, 200 hl Steinecker Krones alaus daryklos įranga. Pajėgumas: iki 6 virimų per dieną. Vieta: JK. Galima įsigyti nedelsiant. Komplektacijoje: • Steinecker malūnas • Steinecker grūdų virimo katilas • Steinecker maišymo indas • Steinecker filtravimo indas • Steinecker kaupimo indas • Steinecker filtravimo šalto misos šildytuvas • Steinecker varinis katilas • Steinecker sūkurio indas • Steinecker misos aušintuvas • HLT ir CLT • Apynių granulių stotis • Garų kondensatorius • Kondensato aušintuvas • Išspaudų šalinimo sistema Fgjdpfx Asxb Uz Ajf Aeb Norėdami gauti kainą ir daugiau informacijos, kreipkitės į Indassol UK. Būsime parodoje Drinktec – atsakykite, jei norėtumėte susitikti ir aptarti detales.

Būklė: naudotas, Gamybos metai: 1992, Overview These four isobaric pressure vessels (each with a capacity of 20,000 liters) were manufactured in 1992 by TMCI Padovan. Originating from the wine industry, they were previously used for sparkling wine production. Equipped with full-surface cooling jackets and designed for operating pressures up to 6 bar, the tanks are suitable for fermentation, maturation, and storage of carbonated beverages such as beer, sparkling wine, and related products. Constructed from carbon steel with an internal food-grade epoxy coating—a technology widely used before stainless steel became the industry standard—they offer a cost-effective alternative to stainless steel tanks, particularly for producers seeking to minimize capital expenditure. Each tank is fully insulated with a complete cooling jacket, enabling temperature-controlled processing. Due to the coating system, periodic inspection and renewal of the epoxy lining are required depending on usage and product type. Technical Data - Manufacturer: TMCI Padovan - Year of manufacture: 1992 - Quantity: 4 units - Type: Isobaric pressure vessel with full cooling jacket - Application: Fermentation, maturation, storage of carbonated beverages - Capacity: 20,000 liters (200 hl) per tank - Material: Bottom: Carbon steel - Internal coating: Food-grade epoxy resin Fgjdpfxoy Hkl Do Af Aob - Insulation: Approx. 100 mm polyurethane with stainless steel sheathing - Pressure resistance: 6 bar - Dimensions (per tank): - External diameter: approx. 2,200 mm - Cylinder height: approx. 7,000 mm - Total height: approx. 9,000 mm

Būklė: naudotas, Gamybos metai: 2002, Overview This tank package was manufactured in 2002 by the Spanish company Parcitank S.A., a recognized producer of stainless steel tanks for the wine and food industry. The nine tanks are suitable for either fermentation or storage, depending on configuration. The set is offered in three packages, each consisting of one 20,000 L fermenter, one 15,000 L storage tank, and one 10,000 L storage tank. Single package purchase is also possible upon request. All tanks are made of AISI 304 stainless steel and are in good condition. Technical Specifications Fermentation Tanks – 20 hl (3 units): • Capacity: 20,000 L • Diameter: 2,500 mm • Cylindrical height: 4,000 mm • Type: Atmospheric with cooling jackets Storage Tanks – 15 hl (3 units): • Capacity: 15,000 L • Diameter: 2,500 mm • Cylindrical height: 3,000 mm • Type: Atmospheric Storage Tanks – 10 hl (3 units): Fgodpfoxbua Sex Af Asb • Capacity: 10,000 L • Diameter: 2,000 mm • Cylindrical height: 3,000 mm • Type: Atmospheric Material: Stainless steel AISI 304 Scope of Delivery • 9 stainless steel tanks (3 × 20 hl, 3 × 15 hl, 3 × 10 hl) • Optional: Sale as a complete set or as 3 individual packages (1 × 20 hl + 1 × 15 hl + 1 × 10 hl)

Būklė: geras (naudotas), Frequency inverter, frequency converter, drive inverter, controller, variable speed drive Fgjdpob A I Htjfx Af Aeb - Input: 380 V 7.5 kW - Output: 133 V 200 Hz - Power: 10 kVA - For edge bander/edge banding machine - Weight: 180 kg

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2001, X ašies eiga: 450 mm, Y ašies eiga: 270 mm, Z ašies eigos atstumas: 310 mm, valdiklių gamintojas: FANUC, valdiklio modelis: Series 21i-M, veleno greitis (maks.): 18 000 aps./min, ašių skaičius: 3, Šis 3 ašių CHIRON FZ 08 W buvo pagamintas 2001 m. Jo didžiausias suklio greitis - 18 000 aps/min ir patikima įrankių sąsaja su HSK-A40. Staklėse yra integruotas padėklų keitiklis, skirtas efektyviam ruošinių tvarkymui. Jei norite gauti aukštos kokybės apdirbimo galimybes, apsvarstykite mūsų parduodamą vertikalųjį apdirbimo centrą CHIRON FZ 08 W. Susisiekite su mumis dėl išsamesnės informacijos apie šias stakles. • Būklė: Mašina nebefunkcionuoja ir gali būti naudojama tik kaip atsarginių dalių tiekėjaElektriniai duomenys • Srovės rūšis: 3/N/PE ~ 50/60 Hz • Darbinė įtampa: 400 V • Valdymo įtampa: 230/24 V • Maitinimo galia: 230 230 V: 12 kVA: 230 230 230 kVA: 230 230 kVA: 230 kVA • Vardinė srovė: 17 A Fedpfxjy Ex H Hj Af Aogb • Saugiklis: 20 ASuklys • Suklio tipas: Vandeniu aušinamas variklio suklys • Didžiausias sukimo momentas: apie 15 NmKita informacija apie mašiną • Detalių keitimo sistema: Integruotas padėklų keitiklis (W tipo) • Pažymėti techninės priežiūros intervalai: 8h, 50h, 200h, 500h, 2000h, 6000h • Tepimo reikalavimai: INSK K11 / ALKANIA 2 (apvalkalas)

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2019, veikimo valandos: 957 h, įvesties srovės tipas: trifazis, bendras svoris: 600 kg, įėjimo įtampa: 400 V, įėjimo dažnis: 50 Hz, lazerio galia: 30 W, padavimo ilgis X ašis: 200 mm, padavimo eiga Y ašimi: 250 mm, padavimo ilgis Z ašis: 330 mm, važiuojamoji greitis (maks.): 20 mm/min, EOS Formiga P110 Velocis Complete System – incl. Peripherals & Accessories For sale is a powerful and proven EOS Formiga P110 Velocis system for industrial 3D printing using the SLS process (Selective Laser Sintering). _____ Machine details: • Model: EOS Formiga P110 Velocis • Year of manufacture: 2019 • Operating hours: only 957 h • Process: Selective Laser Sintering (SLS) • Condition: Very good, fully operational • Accessories and peripherals: complete and original EOS components _____ Technical data: Fsdey El Anepfx Af Aegb • Build volume: 200 x 250 x 330 mm (X x Y x Z) • Laser: CO₂ laser, 30 W • Layer thickness: 0.06 – 0.12 mm • Build speed: up to 20 mm/h (Z-axis, depending on material) • Materials: PA12, PA11, TPU, and other SLS-compatible polymers • Power supply: 400 V, 3~ / 50 Hz • Compressed air: required • Software: EOSPRINT / Material Management System • Machine weight: approx. 600 kg _____ Scope of delivery (complete system): • EOS Formiga P110 Velocis • Unpacking and sieving station P1/P3 • Mixing station P1 for recycled powder (material preparation for economical operation) • Sandblasting cabin by Leering, type DI-12 (for professional post-processing) • Ruwac vacuum cleaner, type WS 200H Zone 22 ATEX (for safe handling of polymer powder) • 4x material containers • 2x build volume containers _____ Special highlights: • Very low operating hours (only 957 h) → almost as new condition • Complete, ready-to-use SLS system • High productivity due to Velocis technology • Closed material cycle → reduced material costs • Industrial standard – ideal for professional applications • All accessories original EOS → perfect system integration _____ Fields of application: • Prototype production • Small series manufacturing • Spare parts & customized components If you have any questions or require further information, please feel free to send us a message or give us a call. A viewing is possible by appointment.