Cronosstech Cehp 300 pirkti naudotą (13 896)

Būklė: naujas, Gamybos metai: 2025, galia: 15 kW (20,39 AG), spaudimo jėga: 200 t, stalo plotis: 800 mm, stalo ilgis: 1 100 mm, perforavimo jėga: 200 t, pramušama skylė stalo paviršiuje: 220 mm, cilindro skersmuo: 60 mm, eigos reguliavimas: 180 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Eccentric Presses are mechanical presses powered via an eccentric mechanism, designed for cold working operations such as punching, cutting, and forming with dies. Thanks to their high production speeds and repeatability, they offer efficient and reliable solutions for mass production lines. The CRONOSSTECH C-Type Eccentric Press 200 Ton is engineered for stable operation in cold forming applications. Its rigid steel construction, pneumatic clutch-brake system, and CE-compliant safety infrastructure ensure reliable performance suited for series production. Key Advantages - Stable stroke performance and high repeatability for serial production - Operator safety-focused design (light curtain + safety systems) - Low maintenance need with centralized automatic lubrication - PLC control with dual-hand/foot pedal operation for production-ready use Areas of Application - Cold cutting and punching operations - Cold extruding applications - Metal forming with dies - High-volume production lines ✅ STANDARD FEATURES • Steel frame construction • 4-sided slide guideways • Spheroidal cast connecting rods and gear housings • Crankshaft and transmission shafts made from 4140 tempered steel • Fully automatic centralized grease lubrication • Pneumatic clutch and brake combination • Conforms to CE safety directives • Double-coil safety valve • Manually adjustable stroke • Light curtain finger–hand protection safety system • PLC control system • Dual-hand/foot pedal control system • Mechanical safety lock system • Emergency reverse run motor • Compliant with occupational safety regulations • CE standard compliance ✅ OPTIONAL FEATURES • Anti-vibration pads • Touchscreen LCD display (standard for 150–300 ton models) • Hydraulic safety system (standard for 200–300 ton models) • Spare bolsters • Coil decoiler, straightener, and feeder • One die set to desired specifications • 8-sided slideways ✅ TECHNICAL SPECIFICATIONS (200 TON) Capacity: 200 Ton Throat depth: 340 mm Table–ram distance: 500 mm Slide–table clearance: 600 mm Distance between side walls: 510 mm Ram (slide) adjustment: 130 mm Approximate press width: 1900 mm Approximate press depth: 2400 mm Approximate press height: 3000 mm Front anchorage dimension: 920 mm Hjdpfsvtyx Ijx Abvonl Side anchorage dimension: 1420 mm Table bore diameter: Ø240 mm Table size: 680×1000 mm Die mounting hole diameter: Ø60 mm Ram size: 620×350 mm Table height from floor: 805 mm Stroke adjustment: 20–140 mm Strokes per minute: 50 spm Motor power: 18.5 + 0.75 kW Motor speed: 1450 rpm Approximate weight: 9200 kg Note: For any changes to the technical specifications, please contact us. ✅ PRODUCTION / SUPPLY NOTE: This machine is manufactured in Turkey by CRONOSSTECH. Sales, commissioning, and aftersales processes are managed by CRONOSSTECH.

Būklė: naujas, Gamybos metai: 2025, galia: 4 500 kW (6 118,29 AG), pjovimo aukštis (maks.): 580 mm, pjovimo plotis (maks.): 1 050 mm, pjovimo greitis: 80 mm/min, juostinio pjūklo ilgas: 7 780 mm, pjūklo juostos plotis: 54 mm, garantijos trukmė: 24 mėnesiai, STANDARD FEATURES · Hydraulic vice · Column-type – Linear guideways Hnjdpjvyycmefx Abvol · Variable speed control (inverter-driven) · Safety switches · Hydraulic blade tensioning · Variable angle cutting from 0 to 60 degrees (positive direction) · Variable angle cutting from 0 to 45 degrees (negative direction) · Mitre gauge · Adjustable head descent system · 1 saw blade included · 1 piece 2-meter material support stand · 24-month mechanical, 12-month electrical warranty · Country of origin: Turkey · Models produced between 220 mm and 3000 mm diameter TECHNICAL SPECIFICATIONS 580X1050 SY2DG Capacity 90° (mm) Round: 580 mm Square: 580 x 580 mm Rectangle: 580 x 1050 mm Capacity 60° (mm) Round: 480 mm Square: 410 mm Rectangle: 300 x 530 mm Capacity 45° (mm) Round: 580 mm Square: 580 x 580 mm Rectangle: 580 x 670 mm Main Motor / Torque: 5.5 kW Hydraulic Motor: 1.1 kW Coolant Motor: 0.09 kW Blade Size: 54 x 1.3 x 7780 mm Material Feeding Height: 655 mm Vice Maximum Opening: 1050 mm Vice Maximum Closing: Rolled Table Width: Dimensions (HxWxL): 3780 x 2240 x 1980 mm Weight: 4100 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 3, apatinio volelio skersmuo: 250 mm, viršutinio volo skersmuo: 250 mm, šoninio volelio skersmuo: 200 mm, vėjo ilgis: 2 050 mm, maks. lakšto storis: 12 mm, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Hnjdpfx Abow Slctevel Motor-driven central rolls Hydraulic up/down movement for rear and lower rolls Precise bending with braked main motor Conical bending and pre-bending system Lower and upper rolls powered via planetary gearbox Rear Roll Ball System for easy plate movement Compliance with EU safety directives High-strength forged steel rolls made from SAE 1050 (CK45) certified steel Hardened shafts Digital displays (2 units) Operation manual OPTIONAL EQUIPMENT Top crane (elevator) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Wire grooves on roll ends NC Control unit Dual speed operation Stepless speed adjustment Ejector system Hydromotor option TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-Bending: 8/10 mm Bending: 10/12 mm Upper & Lower Roll: 250 mm Side Roll: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 4000 mm Width: 1200 mm Height: 1370 mm Weight: 4200 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 400 mm, viršutinio volo skersmuo: 400 mm, šoninio volelio skersmuo: 300 mm, vėjo ilgis: 3 100 mm, maks. lakšto storis: 30 mm, STANDARD EQUIPMENT * Bottom, top, and side rolls move linearly up and down via hydraulically powered cylinders attached to the frame. * Protected against overload. * Top and side rolls are driven by hydraulic motors and planetary gearboxes (3-roll motor driven system). * Roll positions are easily readable via three digital displays. * Easy removal of bent parts thanks to hydraulically opening head and automatically lifting shaft. * User-friendly operation with mobile control panel. * Welded steel construction body. * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts. * Conical bending system. * Centralized lubrication system. * Hydraulic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460). Hnsdpfx Aow Sl T Sjbvel * Electronic balancing system (Ø500-550-580-620 -680). * Dual-speed operating system. OPTIONAL EQUIPMENT * Automation with NC and CNC control systems. * Top crane (elevator) for supporting large diameter bending operations. * Hydraulic side supports for supporting large diameter bending operations. * Hydraulic sheet removal system. * Ground and polished rolls for special applications. * Stepless speed adjustment system. * Electronic balancing system for parallel movement of rolls (Ø280 -320 -350 -380 -400 -460). TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-bending : 20/25 mm Bending Capacity : 25/30 mm Top & Bottom Roll Diameter : 400 mm Side Roll Diameter : 300 mm Motor Power : 38.5 kW Bending Speed : 1.5 - 5 m/min Length : 5850 mm Width : 2250 mm Height : 2350 mm Weight : 20,200 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, galia: 5 kW (6,80 AG), STANDARTINĖ ĮRANGA Plieninė suvirinta konstrukcija Trys varikliu varomi volai Iš specialios didelio stiprumo medžiagos grūdinti ir šlifuoti velenai Horizontali ir vertikali darbo padėtis Grūdinti standartiniai volai Nuo korpuso atskirtas mobilus valdymo pultas Rankinės trys kryptimis reguliuojamos šoninės atramos Tikslus lenkimas su stabdžiu varikliu Skaitmeniniai indikatoriai (2 vnt.) PAPILDOMA ĮRANGA Vamzdžių ir profilių lenkimo volai Papildomos 2 ašių hidraulinės šoninės atramos Automatizacija su NC valdymu TECHNINĖS CHARAKTERISTIKOS Viršutinio veleno skersmuo: 80 mm Apatinio veleno struktūra: 70 mm Volo skersmuo: 245 mm Darbo greitis: 7 m/min Variklio galia: 4,75 kW Hnsdpfjw Smibex Abvjl Ilgis: 1500 mm Plotis: 1000 mm Aukštis: 1400 mm Svoris: 1645 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 550 mm, viršutinio volo skersmuo: 550 mm, šoninio volelio skersmuo: 450 mm, vėjo ilgis: 3 100 mm, maks. lakšto storis: 50 mm, plieno lakšto storis (maks.): 50 mm, galia: 70 kW (95,17 AG), garantijos trukmė: 12 mėnesiai, Įranga: avarinis stabdymas, grūdinti volai, kojinis nuotolinio valdymo pultas, pasukamas viršutinis volas, STANDARD EQUIPMENT * Lower, upper, and side rolls move linearly up and down via body-mounted hydraulic cylinders * Protected against overloading * Upper and side rolls are driven by hydraulic motors and planetary reducers (all 3 rolls are motor-driven) * Position of the rolls is easily read via three digital indicators * Hydraulically opening head and automatically lifting shaft allow easy removal of bent parts * Very user-friendly thanks to mobile control panel * Welded steel construction frame * Forged or rolled steel shafts, induction-hardened SAE 1050 (CK 50) * Cone bending system Hsdpfexbzptex Abvenl * Centralized lubrication system * Hydraulic balancing system for parallel roll movement (Ø280-320-350-380-400-460) * Electronic balancing system (Ø500-550-580-620-680) * Dual-speed operating system OPTIONAL EQUIPMENT * Automation via NC and CNC control * Top crane (elevator) for supporting large-diameter bending * Hydraulic side supports for large-diameter bending * Hydraulic sheet removal system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel roll movement (Ø280-320-350-380-400-460) TECHNICAL SPECIFICATIONS Bending Length : 3100 mm Pre-Bending : 50/40 mm Bending : 40/35 mm Upper & Lower Roll Diameter : 550 mm Side Roll Diameter : 450 mm Motor Power : 70 kW Bending Speed : 1 - 4 m/min Length : 6750 mm Width : 2900 mm Height : 2950 mm Weight : 47,000 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, Vamzdžio skersmuo (maks.): 51 mm, Vamzdžio ilgis (maks.): 3 000 mm, Vamzdžio sienelės storis (maks.): 3 mm, Lenkimo kampas (maks.): 190 °, lenkimo spindulys (maks.): 250 mm, ašių skaičius: 5, Įranga: CE žymėjimas, avarinis stabdymas, kojinis nuotolinio valdymo pultas, STANDARD EQUIPMENT • 3 Sets of Dies (1 set of rolling dies and 2 sets of bending dies, or 3 sets of bending dies, in requested sizes) • 5-axis servo control (Y, B, C, H, V) • Servo Motor-Powered Feeding Axis • Servo Motor-Powered Rotational Axis • Servo Motor-Powered Bending Axis • Servo Motor-Powered H and V Axes • 21” TFT Touchscreen Mobile CNC Control Unit • Rolling functionality • 3D Bending simulation • Collision simulation • Daily, Weekly, and Monthly Total Operation Status Reports Hjdoxircaepfx Abvsnl • Calculation of Material Length • Calculation of Estimated Bending Time • Conversion of X-Y-Z to Y-B-C • Mobile Foot Pedal with Emergency Stop Feature • Remote support • Bending with or without mandrel • Safety plate behind the bending head • Hydraulic Clamping • Hydraulic Mandrel • Hydraulic Support • Hydraulic Linear Guide System • Hydraulic Clamping Jaws • Electrical Panel Safety Lock and Panel Lock with Key • Electrical System Cooler • Overload Protection • Detailed Operation Reports Automatically Sent OPTIONAL EQUIPMENT (Not Included in Price) • Additional Die Sets • Safety Mat (750 x 1000 mm) • Safety Mat (1000 x 1500 mm) • Hydraulic Oil Heater • Additional Mandrel Length (up to 6 m) – per meter • Ball Mandrel and Wiper Die • Automatic Mandrel Lubrication System (for suitable pipe diameters) • Hydraulic Oil Cooler CAPACITY MB-51 CNC/5 AXIS Maximum Capacity mm Ø51x3mm Maximum Bending Radius mm 250mm Maximum Bending Angle ° 190° Hydraulic Pressure bar 50-200 Working Length mm 3000 Rotational Tolerances ±0.1 Bending Speed kW Variable Dimensions (LxWxH) mm 6350x1400x1600 Weight kg 3750

Būklė: naujas, Gamybos metai: 2026, spaudimo jėga: 200 t, eigos ilgis: 60 mm, stalo plotis: 400 mm, stalo ilgis: 4 200 mm, eigos reguliavimas: 60 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Mūsų presai ir padavimo linijos, sukurtos durų bei langų furnitūros sektoriui ir galinčios veikti tiek dvigubai, tiek viengubai, užtikrina maksimalų našumą ilgus metus. Langų furnitūros sektoriuje, kurioje itin svarbi didelė gamybos apimtis, mūsų presai ir šioje srityje sukaupta patirtis leidžia užtikrinti aukščiausią klientų pasitenkinimą. -Spaudimo jėga iki 400 tonų -Stalo ilgis iki 6000 mm -2 arba 3 svirčių pasirinkimas -Automatinė cirkuliacinė smulkioji alyvos lubrikacija -Progresyvinio tepimo blokas -Prieiga prie preso iš galo ir priekio -Slidžios durelės su magnetiniais davikliais Hodjxrbmyjpfx Abvonl -Indukciškai grūdinti ir šlifuoti krumpliaračiai -Kūginiu užraktu tvirtinamos krumpliaračių ir stebulių jungtys PRESAS: 200 TONŲ APSUKOS: 40–70 APS./MIN. EIGA: 60 MM MAKS. FORMOS AUKŠTIS: 340MM STALO–KUMŠTUKO AUKŠTIS: 400MM REGULIAVIMO DIAPAZONAS: 100MM VIRŠUTINIO STALO IŠMATAVIMAI: 400X3000MM APATINIO STALO IŠMATAVIMAI: 400X4200MM VARIKLIS: 18,5 KW VARIKLIO APSUKOS: 3000 APS./MIN.

Būklė: naujas, Gamybos metai: 2024, Vamzdžio skersmuo (maks.): 76 mm, Lenkimo kampas (maks.): 190 °, lenkimo spindulys (maks.): 250 mm, bendras ilgis: 5 800 mm, bendras plotis: 1 550 mm, bendras aukštis: 1 750 mm, garantijos trukmė: 12 mėnesiai, aliuminio lakšto storis (maks.): 4 mm, plieno lakšto storis (maks.): 4 mm, MAXIMUM CAPACITY: Ø76x4 mm MAXIMUM BENDING RADIUS: 250 mm BENDING ANGLE: 190 degrees WORKING LENGTH: 4000 mm MOTOR POWER: 23 kW LENGTH: 5800 mm WIDTH: 1550 mm HEIGHT: 1750 mm BENDING SPEED: Adjustable Hnjdpfxeu Hix Ie Abvel STANDARD FEATURES One set of bending dies according to customer specifications Servo-driven feeding axis Servo-driven rotation axis Automatic detailed work report via email Servo bending axis (SFB 38-CNC/R1) Gear-driven bending system (51-65-76-90) Mobile CNC control unit with 21” color display 3D bending simulation Display of total daily, weekly, and monthly production quantity Calculation of total material length to be used Estimation of bending operation time Conversion of X-Y-Z data to Y-B-C Remote diagnostics/support Portable foot pedal with emergency stop Manual – Automatic bending Mandrel – Non-mandrel bending Safety sheet with switch at the rear of bending head Automatic mandrel lubrication system (SFB 38 CNC/R1) Hydraulic clamping Hydraulic mandrel Hydraulic support Hydraulic oil cooler Hydraulic linear slider system Hydraulic collet Electrical panel safety lock and panel lock with key Electrical panel cooler Overload protection

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 150 t, eigos ilgis: 500 mm, stalo plotis: 800 mm, stalo ilgis: 1 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 150 H-Type Single-Acting Hydraulic Press – 8 Slide Guides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are industrial presses with a rigid steel construction designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to its 8-slide guide H-frame design, it ensures stable, balanced, and repeatable performance during pressing operations. The CHP 150 model is developed to provide reliable performance and long service life for medium-tonnage applications. CHP Series – Structural Features CHP series presses are engineered considering heavy-duty conditions. The frame and load-bearing parts are stress-relieved by vibration. Bronze Zr14 slide bushings ensure smooth load transfer and prolonged, stable operation. ⚙️ Standard Equipment Steel construction, 8-slide guide H-frame press body Frame and load-bearing parts stress-relieved by vibration Bronze Zr14 slide bushings WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) Machine construction designed and manufactured in compliance with CE standards PLC-controlled hydraulic system Touch panel display (DELTA 7”) Adjustable ram stroke and tonnage control Automatic lubrication system Electronic filter contamination warning On-screen monitoring of hydraulic unit oil temperature and system status Cooling system Off-line filtration Two-hand control system Light barrier (standard for operator safety) SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 150 Type: Steel construction, 8-slide guide H-frame press body Frame Material: St52 – ERDEMİR Slide Bushings: Bronze Zr14 Capacity (Ram): 150 Ton Moving Table Dimensions: 800 × 1000 mm Fixed Table Dimensions: 800 × 1000 mm Parallelism Tolerance: 120 micron/meter Squareness Tolerance: 60 micron/meter Stroke (Ram): 500 mm Min. Daylight: 100 mm Max. Daylight: 600 mm Weld Stress Relief: Vibration method Welding Operations: WPQR and WPS certified by TÜRK-AK, EN ISO 15614-1/2017 (inspected by certified welding coordination engineers according to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 18.5 kW – IE3 Main Pump: 32 cm³ – REXROTH or PARKER Moving Table Rapid Descent Speed: 150 mm/sec Moving Table Drawing Speed: 12 mm/sec Moving Table Return Speed: 170 mm/sec Main Cylinder Bore: Ø280 mm – Ck45 Approx. Height of Press: 3650 mm Approx. Width of Press: 2950 mm Approx. Depth of Press: 2000 mm Height of Lower Table from Floor: 1250 mm Pre-Fill Valve: NG 100 Hedpfex N T Dzox Abvjnl Hydraulic Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Distance Encoder: NOVATECHNIK or TURCK PLC System: DELTA Touch Panel Display: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 7 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 400 t, eigos ilgis: 800 mm, stalo plotis: 1 200 mm, stalo ilgis: 1 500 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 400 H-Type Single-Acting Hydraulic Press – 8-Guided Slides General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are robust industrial press solutions designed for sheet metal forming, straightening, assembly, and die pressing applications. Thanks to the 8-guided H-frame construction, the high loads generated during pressing operations are distributed evenly, ensuring stable and repeatable performance. The CHP 400 model is specifically engineered to deliver reliable, long-lasting heavy-duty performance where high tonnage is required. CHP Series – Structural Features CHP series presses are engineered for demanding industrial environments. The frame and supporting components are stress relieved by vibration. Bronze Zr14 guide bushings ensure smooth load distribution during ram motion, maintaining long-term precision. Hnedex N T Hpepfx Abvjl ⚙️ Standard Equipment - Steel construction, 8-slide H-type press frame - Vibration stress-relieved frame and carrier components - Bronze Zr14 guide bushings - WPQR & WPS certified welding processes accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Machine design and manufacture according to CE standards - PLC-controlled hydraulic system - Touch screen panel (DELTA 7”) - Adjustable ram stroke and tonnage settings - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via display - Cooling system - Off-line filtration system - Two-hand control system - Light barrier (standard operator safety feature) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 400 Type: Steel construction, 8-slide H-frame press Frame Material: St52 – ERDEMİR Guide Bushings: Bronze Zr14 Capacity (Ram): 400 Tons Moving Table Dimensions: 1200 × 1500 mm Fixed Table Dimensions: 1200 × 1500 mm Parallelism Tolerance: 120 micron/m Perpendicularity Tolerance: 60 micron/m Stroke (Ram): 800 mm Min. Daylight: 100 mm Max. Daylight: 900 mm Weld Stress Relief: Vibration stress relieving Welding Application: WPQR & WPS certified by TÜRK-AK, following EN ISO 15614-1/2017 (supervised by welding coordination engineers certified to EN ISO 14731) Max. Working Pressure: 250 Bar Total Motor Power: 37 kW – IE3 Main Pump: 45 cm³ – REXROTH or PARKER Moving Table Rapid Down Speed: 150 mm/s Moving Table Pressing Speed: 12 mm/s Moving Table Return Speed: 170 mm/s Main Cylinder Bore: Ø450 mm – Ck45 Auxiliary Acceleration Cylinders: 2 units Approx. Press Height: 5600 mm Approx. Press Width: 3250 mm Approx. Press Depth: 2200 mm Lower Table Height from Floor: 1400 mm Pre-fill Valve: NG 150 Hydraulic Power Unit: REXROTH or PARKER Cooling System: EMMEGI – CIESSE – PARKER Off-line Filtration: REXROTH or PARKER Linear Position Sensor: NOVATECHNIK or TURCK PLC Solution: DELTA Touch Screen Panel: DELTA 7” Switchgear Components: SIEMENS – SCHNEIDER Approximate Weight: 19.5 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 800 t, eigos ilgis: 800 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 800 H-Type Single-Acting Hydraulic Press – 8-Guided General Description The CRONOSSTECH CHP series H-type single-acting hydraulic presses are designed for heavy-duty sheet metal forming, straightening, assembly, and high-tonnage pressing applications. The 8-guide H-frame structure ensures uniform distribution of forces generated during pressing, providing maximum rigidity and long-lasting operation. The CHP 800 model has been developed to deliver reliable and stable performance for high-capacity production lines. CHP Series – Structural Features CHP series presses are engineered with heavy industry requirements in mind. The frame and main carrier components are stress-relieved by vibration. Bronze Zr14 guide bushings provide even load distribution and precise operation during ram movement. ⚙️ Standard Equipment - Steel construction, 8-guide H-type press frame - Vibration stress-relieved frame structure - Bronze Zr14 guide bushings - WPQR & WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) - Design and production in compliance with CE standards - PLC-controlled hydraulic system - Touchscreen display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring via display - Cooling system - Off-line filtration - Two-hand operation control system - Light curtain (standard for operator safety) - SIEMENS – SCHNEIDER switchgear components 📐 Technical Specifications – CHP 800 - Type: Steel construction, 8-guided H-frame press - Frame Material: St52 – ERDEMİR - Guide Bushing: Bronze Zr14 - Capacity (Ram): 800 Ton - Movable Table Size: 1500 × 2000 mm - Fixed Table Size: 1500 × 2000 mm - Parallelism Tolerance: 120 micron/m - Squareness Tolerance: 60 micron/m - Stroke (Ram): 800 mm - Min. Daylight: 100 mm - Max. Daylight: 900 mm - Stress Relief: Vibration stress relief - Welding Application: WPQR and WPS-certified welding accredited by TÜRK-AK; EN ISO 15614-1/2017 welding certificate (inspection by certified welding coordination engineers according to EN ISO 14731) - Max. Working Pressure: 250 Bar - Total Motor Power: 75 kW – IE3 - Main Pump: 70 cm³ – REXROTH or PARKER - Movable Table Rapid Down Speed: 150 mm/s - Movable Table Drawing Speed: 12 mm/s - Movable Table Return Speed: 170 mm/s - Main Cylinder Bore: Ø390 mm – Ck45 (2 pcs) - Auxiliary Acceleration Cylinders: 2 pcs - Approximate Height: 6000 mm - Approximate Width: 3350 mm - Approximate Depth: 2700 mm - Lower Table Height from Floor: 1450 mm - Pre-fill Valve: NG 200 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER Hsdex N T Nkopfx Abvenl - Off-line Filtration: REXROTH or PARKER - Linear Position Transducer: NOVATECHNIK or TURCK - PLC Application: DELTA - Touchscreen Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 45 Ton Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 2 000 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 500 mm, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHP 2000 H-Type Hydraulic Press – 8-Guideway General Description The CRONOSSTECH CHP series H-type hydraulic presses are developed for heavy-duty forming, deep drawing, spinning, and die applications requiring extremely high tonnage. Thanks to the 8-guideway H-frame structure, maximum rigidity is achieved during pressing, and parallelism and perpendicularity tolerances are maintained throughout the long stroke. The CHP 2000 model, with its large table dimensions, high-capacity hydraulic system, and powerful motor, offers a reliable and long-lasting solution for automotive, defense, heavy industry, and high-tonnage production lines. The frame structure is stress-relieved by vibration to ensure stable operation. ⚙️ Standard Equipment Hnodex N T Srjpfx Abvjl - Steel construction, 8-guideway H-frame press type - Vibration stress-relieved frame structure - Bronze Zr14 guideway bearings - Welding procedures approved by TÜRK-AK accredited WPQR and WPS (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touch panel display (DELTA 7”) - Adjustable ram stroke and tonnage control - Automatic lubrication system - Electronic filter contamination warning - Hydraulic unit oil temperature and system status monitoring on screen - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER switching components 📐 Technical Specifications – CHP 2000 - Type: Steel construction, 8-guideway H-frame press - Frame Material: St52 – ERDEMİR - Guideway Bearings: Bronze Zr14 - Capacity (Ram): 2000 Tons - Movable Table Dimensions: 1500 × 2500 mm - Fixed Table Dimensions: 1500 × 2500 mm - Parallelism Tolerance: 120 micron/m - Perpendicularity Tolerance: 60 micron/m - Stroke (Ram): 1000 mm - Min. Daylight: 200 mm - Max. Daylight: 1200 mm - Weld Stress Relief: Vibration stress relief - Welding Procedure: WPQR and WPS approved by TÜRK-AK, certified to EN ISO 15614-1/2017 - Max. Working Pressure: 250 Bar - Total Motor Power: 180 kW – IE3 - Main Pump: 140 cm³ – REXROTH or PARKER - Movable Table Fast Descent Speed: 150 mm/sec - Movable Table Spinning Speed: 12 mm/sec - Movable Table Return Speed: 170 mm/sec - Main Cylinder Inner Diameter: Ø720 mm – Ck45 (2 units) - Auxiliary Acceleration Cylinders: 2 units - Approximate Press Height: 6300 mm - Approximate Press Width: 3850 mm - Approximate Press Depth: 2500 mm - Table Height from Ground: 1500 mm - Pre-fill Valve: NG 200 - Hydraulic Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Position Encoder: NOVATECHNIK or TURCK - PLC: DELTA - Touch Panel Display: DELTA 7” - Switchgear Components: SIEMENS – SCHNEIDER - Approximate Weight: 95 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 150 t, eigos ilgis: 600 mm, stalo plotis: 1 000 mm, stalo ilgis: 1 200 mm, atitraukimo jėga: 50 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 150/50 H-Type Hydraulic Deep Drawing (Spinning) Press – 8-Guided Slides General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are engineered with a double-acting mechanism to ensure controlled material flow during sheet metal forming, deep drawing, and spinning applications. The 8-guided H-frame structure delivers maximum rigidity throughout the pressing process, maintaining stable parallelism and perpendicularity tolerances along the stroke. The CHSP 150/50 model features a 150-ton main ram and a 50-ton blank holder ram (cushion), specifically designed for precise and repeatable deep drawing operations. The frame construction is stress-relieved by vibration, ensuring reliable and long-lasting performance. ⚙️ Standard Equipment - Steel construction H-frame body with 8 slider guides - Vibration stress-relieved frame design - Bronze Zr14 slide bearings - WPQR and WPS certified welding by TÜRK-AK accredited inspector (EN ISO 15614-1:2017 / EN ISO 14731) - Design and manufacturing in accordance with CE standards - PLC-controlled hydraulic system - Touchscreen panel (DELTA 7”) - Adjustable ram and cushion stroke control - Adjustable ram and cushion force (pressure) control - Automatic lubrication system - Electronically monitored filter contamination warning - Display for monitoring hydraulic unit oil temperature and system status - Cooling system - Off-line filtration - Safety systems for operator protection - SIEMENS – SCHNEIDER electrical components Hjdpfx Ajx N T U Hsbvonl 📐 Technical Specifications – CHSP 150/50 - Type: Steel construction H-frame with 8 slider guides - Frame Material: St52 – ERDEMİR - Slide Bearing: Bronze Zr14 - Main Ram Capacity: 150 tons - Cushion Capacity: 50 tons - Moving Table Size: 1000 × 1200 mm - Fixed Table Size: 1000 × 1200 mm - Parallelism Tolerance: 120 micron/meter - Perpendicularity Tolerance: 60 micron/meter - Ram Stroke: 600 mm - Cushion Stroke: 200 mm - Min. Daylight: 100 mm - Max. Daylight: 700 mm - Weld Stress Relief: Vibration - Welding Procedure: WPQR and WPS approved by TÜRK-AK, EN ISO 15614-1/2017 (All welding operations supervised by certified Welding Coordination Engineers in accordance with EN ISO 14731) - Max. Operating Pressure: 250 Bar - Total Motor Power: 18.5 kW – IE3 - Main Pump: 32 cm³ – REXROTH or PARKER - Fast Down Speed of Moving Table: 150 mm/sec - Spinning Speed of Moving Table: 12 mm/sec - Return Speed of Moving Table: 170 mm/sec - Cushion Forward Speed: 30 mm/sec - Main Cylinder Bore: Ø280 mm – Ck45 - Cushion Cylinder Bore: Ø160 mm – Ck45 - Auxiliary Acceleration Cylinders: 2 pcs - Approximate Press Height: 3650 mm - Approximate Press Width: 2950 mm - Approximate Press Depth: 2000 mm - Fixed Table Height from Floor: 1250 mm - Main Pre-Fill Valve: NG 100 - Hydraulic Power Unit: REXROTH or PARKER - Cooling System: EMMEGI – CIESSE – PARKER - Off-line Filtration: REXROTH or PARKER - Linear Measurement Sensor: NOVATECHNIK or TURCK - PLC Control: DELTA - Touchscreen Panel: DELTA 7” - Electrical Components: SIEMENS – SCHNEIDER - Approximate Weight: 11 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 800 t, eigos ilgis: 1 000 mm, stalo plotis: 1 500 mm, stalo ilgis: 2 000 mm, atitraukimo jėga: 270 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 800/270 H-Type Hydraulic Deep Drawing (Spinning) Press – 8 Guideways General Description The CRONOSSTECH CHSP series H-type hydraulic deep drawing presses are designed based on the double-acting (ram + blankholder) working principle for high-tonnage sheet metal forming, deep drawing, and spinning applications. The 8-slide H-frame structure provides high rigidity, stable parallelism, and an extended die life even with large table dimensions during the pressing process. The CHSP 800/270 model, featuring 800 tons main ram and 270 tons blankholder capacity, has been developed for processes requiring controlled material flow, especially in automotive, white goods, defense industries, and heavy sheet metal forming applications. The vibration stress-relieved steel construction frame ensures long-lasting and reliable operation. ⚙️ Standard Equipment • Steel construction, 8-slide H-frame press body • Vibration stress-relieved frame structure • Bronze Zr14 slide bushings • WPQR and WPS certified welding applications with TÜRK-AK accreditation (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • Touchscreen panel (DELTA 7”) • Adjustable ram and blankholder stroke control • Adjustable ram and blankholder tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • Monitoring of hydraulic unit oil temperature and system status via display • Off-line filtration and cooling system • SIEMENS – SCHNEIDER electrical switch gear • Safety systems for operator protection 📐 Technical Specifications – CHSP 800/270 Type: Steel construction, 8-slide H-frame press body Frame Material: St52 – ERDEMİR Slide Bushing: Bronze Zr14 Capacity (Ram): 800 Tons Capacity (Blankholder): 270 Tons Hjdpfex N Uh Ujx Abvenl Moving Table Size: 1500 × 2000 mm Fixed Table Size: 1500 × 2000 mm Parallelism Tolerance: 120 micron/m Squareness Tolerance: 60 micron/m Stroke (Ram): 1000 mm Stroke (Blankholder): 350 mm Min. / Max. Daylight: 100 / 1100 mm Max. Working Pressure: 250 Bar Total Motor Power: 75 kW – IE3 Main Pump: 70 cm³ – REXROTH or PARKER Main Cylinder: Ø390 mm – Ck45 (2 units) Blankholder Cylinder: Ø370 mm – Ck45 Pre-fill Valve: NG 200 PLC: DELTA Touchscreen Panel: DELTA 7” Approximate Weight: 54 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 2 500 t, eigos ilgis: 1 000 mm, stalo plotis: 1 800 mm, stalo ilgis: 2 600 mm, atitraukimo jėga: 800 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH CHSP 2500/800 H-Type Hydraulic Deep Drawing (Forming) Press – 8-Guided Slideways General Description The CRONOSSTECH CHSP series H-type hydraulic forming presses have been developed for heavy-duty deep drawing applications that require very high tonnage, large table sizes, and precise blank holder force. The 8-guided H-frame body structure ensures high rigidity throughout the pressing process, maintaining parallelism and perpendicularity tolerances over long strokes. The CHSP 2500/800 model offers maximum stability, controlled material flow, and repeatable production performance for large and deep drawing dies, with a 2500-ton main ram and an 800-ton blank holder capacity. The stress-relieved steel construction body (vibration treated) is designed for robust and reliable long-term use in heavy industry environments. ⚙️ Standard Equipment • Steel construction, H-frame body type with 8 slideways • Vibration stress-relieved frame construction • Bronze Zr14 slideway bearings Hjdex N Uk Aopfx Abvonl • WPQR and WPS certified welding applications accredited by TÜRK-AK (EN ISO 15614-1:2017 / EN ISO 14731) • PLC-controlled hydraulic system • 7” DELTA touchscreen control panel • Adjustable ram and blank holder stroke control • Adjustable ram and blank holder tonnage (pressure) control • Automatic lubrication system • Electronically controlled filter contamination warning • On-screen monitoring of hydraulic unit oil temperature and system status • Off-line filtration and industrial cooling system • SIEMENS – SCHNEIDER switchgear components • Heavy-duty industrial safety systems 📐 Technical Specifications – CHSP 2500/800 Type: Steel construction, 8-guided H-frame press body Frame Material: St52 – ERDEMİR Slideway Bearings: Bronze Zr14 Capacity (Ram / Blank Holder): 2500 / 800 Tons Moving / Fixed Table: 1800 × 2600 mm Parallelism / Perpendicularity: 120 / 60 micron/m Stroke (Ram / Blank Holder): 1000 / 350 mm Daylight Opening (Min / Max): 200 / 1200 mm Max. Operating Pressure: 250 Bar Total Motor Power: 180 kW – IE3 Main Pump: 140 cm³ – REXROTH or PARKER Main Cylinder: Ø565 mm – Ck45 (4 units) Blank Holder Cylinder: Ø450 mm – Ck45 (2 units) Pre-Fill Valve: NG 200 PLC / Panel: DELTA / DELTA 7” Approximate Weight: 132 Tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 100 t, eigos ilgis: 600 mm, stalo plotis: 800 mm, stalo ilgis: 800 mm, tarpas tarp stulpų: 800 mm, atitraukimo jėga: 40 t, darbinis slėgis: 250 juosta, Įranga: apsaugos šviesos užtvara, dokumentacija / vadovas, CRONOSSTECH 100/40 Ton Four-Column Hydraulic Deep Drawing Press General Description The CRONOSSTECH 100/40 ton four-column hydraulic deep drawing press is an industrial solution with a rigid four-column body structure, engineered for metal forming, deep drawing, and precision pressing applications. The frame is fabricated from St52 quality steel and subjected to stress relief treatment by vibratory methods. This design ensures high parallelism and perpendicularity tolerances are maintained over prolonged periods. The ram and cushion systems operate independently; stroke and pressure settings are precisely controlled via touchscreen panel. Equipped with REXROTH or PARKER hydraulic components, IE3 efficiency class motor, and PLC-controlled architecture, the press delivers high efficiency, reliability, and a long service life. The automatic lubrication system and electronic filter contamination warnings minimize maintenance requirements. This model is an ideal solution for medium-scale serial production, die trial runs, and precision forming operations. Key Advantages - Rigid four-column press frame - Independent stroke and tonnage adjustment for ram and cushion - Full control via touchscreen panel - High precision and repeatability - Low maintenance cost and long service life Applications - Metal spinning and forming operations - Deep drawing applications - Die trial runs and prototype production Hnodpfxex N Ulyj Abvol - Auxiliary pressing operations ⚙️ STANDARD & TECHNICAL SPECIFICATIONS TYPE: Four-Column FRAME MATERIAL: St52 – ERDEMİR COLUMN SHAFT DIAMETER: Ø 90 mm – 4 units, induction-hardened chrome-plated shafts SLIDE BEARING: Bronze Zr14 CAPACITY (RAM): 100 tons CAPACITY (CUSHION): 40 tons DISTANCE BETWEEN COLUMNS: 800 × 800 mm PARALLELISM TOLERANCE: 120 micron/m PERPENDICULARITY TOLERANCE: 60 micron/m STROKE (RAM): 600 mm STROKE (CUSHION): 200 mm MIN. CLEARANCE: 100 mm MAX. CLEARANCE: 700 mm WELDING STRESS RELIEF: Via vibration WELDING PROCEDURE: TÜRK-AK accredited WPQR & WPS – EN ISO 15614-1:2017 (EN ISO 14731) MAX. OPERATING PRESSURE: 250 Bar TOTAL MOTOR POWER: 15 kW – IE3 MAIN PUMP: 22 cm³ – REXROTH or PARKER MOVABLE TABLE FAST DESCENT SPEED: 150 mm/s MOVABLE TABLE FORMING SPEED: 12 mm/s MOVABLE TABLE RETURN SPEED: 170 mm/s CUSHION TABLE FORWARD SPEED: 30 mm/s MAIN CYLINDER BORE DIAMETER: Ø 230 mm – Ck45 CUSHION CYLINDER BORE DIAMETER: Ø 145 mm – Ck45 AUXILIARY BOOSTER CYLINDERS: 2 units APPROXIMATE PRESS HEIGHT: 3500 mm APPROXIMATE PRESS WIDTH: 1150 mm APPROXIMATE PRESS DEPTH: 1150 mm DISTANCE FROM FLOOR TO LOWER TABLE: 1200 mm MAIN FILLING VALVE: NG 100 HYDRAULIC UNIT: REXROTH or PARKER COOLING SYSTEM: EMMEGI – CIESSE – PARKER OFF-LINE FILTRATION: REXROTH or PARKER LUBRICATION TYPE: Automatic (adjustable from screen) RAM / CUSHION STROKE & TONNAGE ADJUSTMENT: Adjustable from screen SYSTEM & PRESS STATUS INFO: Viewable via display DIE MEMORY: Adjustable from screen LINEAR DISTANCE ENCODER: NOVATECHNIK or TURCK PLC APPLICATION: DELTA TOUCHSCREEN PANEL: DELTA 7” SWITCHGEAR COMPONENTS: SIEMENS – SCHNEIDER APPROXIMATE WEIGHT: 7.5 tons Production Note This machine is manufactured by CRONOSSTECH in Turkey.

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 250 mm, viršutinio volo skersmuo: 250 mm, šoninio volelio skersmuo: 200 mm, vėjo ilgis: 2 050 mm, maks. lakšto storis: 12 mm, STANDARD EQUIPMENT Very well suited for bending light and medium gauge sheet, aluminum or stainless steel materials Ideally suited for rolling materials into round and various diameters Bottom and side rolls are hydraulically operated up and down in a direct linear motion Protected against overload Top roll driven by electric motor and planetary gearbox; bottom roll driven by a cardan coupling system; two rolls power-driven Roll positions can be easily read on three digital position indicators Rolled parts can be removed easily thanks to the hydraulically opening head Very easy operation with movable control panel Welded steel construction frame SAE 1050 (CK 45) induction-hardened forged or rolled steel shafts Cone bending system Hydraulic balancing system for parallel movement of shafts Compliant with EU safety standards and marked with CE User manual OPTIONAL EQUIPMENT Remote assistance with NC control Top crane (hoist) for large diameter bending support Hydraulic side supports for large diameter bending Ground and polished rolls Dual-speed adjustment system Infinitely variable speed adjustment Rotation driven by hydromotor Extractor system Hnjdpfx Aow Slxzjbvel TECHNICAL SPECIFICATIONS Bending Length: 2050 mm Pre-bending: 8/10 mm Bending: 10/12 mm Top & Bottom Rolls: 250 mm Side Rolls: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 40 lt Length: 4000 mm Width: 1500 mm Height: 1370 mm Weight: 5350 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 460 mm, viršutinio volo skersmuo: 460 mm, šoninio volelio skersmuo: 380 mm, vėjo ilgis: 4 100 mm, maks. lakšto storis: 25 mm, galia: 38,5 kW (52,35 AG), STANDARD EQUIPMENT * The lower and side rolls move up and down linearly via pistons hydraulically connected to the machine body * Protected against overload * The upper roll and side rolls are driven by hydromotor and planetary gearbox (three-roller motor drive) * Position of the rolls can be easily read with three digital displays * The hydraulically opening head and automatically lifting shaft allow for easy removal of the bent part * Very easy operation with mobile control panel * Welded steel construction body * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) * Electronic balancing system (Ø500-550-580-620-680) * Dual speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Overhead crane (elevator) for support during large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejector system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel movement of the rolls (Ø280 -320 -350 -380 -400 -460) Hsdpfxjw Sl I Ne Abvonl TECHNICAL SPECIFICATIONS Bending Length: 4100 mm Pre-bending: 16/20 mm Bending: 20/25 mm Upper & Lower Roll: 460 mm Side Roll: 380 mm Motor Power: 38.5 kW Bending Speed: 1.5 - 5 m/min Length: 6950 mm Width: 2300 mm Height: 2350 mm Weight: 29,500 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 350 mm, viršutinio volo skersmuo: 350 mm, šoninio volelio skersmuo: 260 mm, vėjo ilgis: 2 550 mm, maks. lakšto storis: 25 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls move linearly up and down via hydraulic pistons connected to the frame * Protected against overload * Upper roll and side rolls are driven by hydromotor and planetary reducer (3-roll motor drive) * Easy-to-read position of rolls with three digital displays * Hydraulically opening head and automatically lifting shaft make it easy to remove the bent part * Very easy operation with movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction-hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of shafts (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed operation system OPTIONAL EQUIPMENT * Automation with NC and CNC control * Overhead crane (hoist) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic plate removal system * Ground and polished rolls for special applications * Stepless speed adjustment system * Electronic balancing system for parallel shaft movement (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Hnjdpfow Smb Rox Abvsl Bending Length: 2550 mm Pre-bending: 16/20 mm Bending: 20-25 mm Upper & Lower Roll: 350 mm Side Roll: 260 mm Motor Power: 23.5 kW Bending Speed: 1.5 - 5 m/min Length: 4850 mm Width: 1900 mm Height: 1950 mm Weight: 12,800 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 4, apatinio volelio skersmuo: 280 mm, viršutinio volo skersmuo: 280 mm, šoninio volelio skersmuo: 220 mm, vėjo ilgis: 2 550 mm, maks. lakšto storis: 16 mm, STANDARD EQUIPMENT * The lower, upper, and side rolls are moved up and down linearly by pistons connected hydraulically to the frame * Protected against overload * Upper and side rolls are driven by hydraulic motors and planetary gearboxes (3 roll motor drive) * The positions of the rolls can be easily read via three digital displays * Easy removal of the bent part thanks to hydraulically opening head and automatically lifting shaft * Very easy operation with the movable control panel * Welded steel construction body * SAE 1050 (CK 50) induction hardened, forged or rolled steel shafts * Cone bending system * Centralized lubrication system * Hydraulic balancing system for parallel movement of rolls (Ø280 - 320 - 350 - 380 - 400 - 460) * Electronic balancing system (Ø500 - 550 - 580 - 620 - 680) * Dual-speed operating system OPTIONAL EQUIPMENT * NC and CNC control for automation * Top crane (elevator) support for large diameter bending * Hydraulic side supports for large diameter bending * Hydraulic sheet ejection system * Ground and polished rolls for special applications * Infinitely variable speed adjustment system * Electronic balancing system for parallel movement of rolls (Ø280 - 320 - 350 - 380 - 400 - 460) TECHNICAL SPECIFICATIONS Bending Length: 2550 mm Pre-bending Capacity: 10/12 mm Bending Capacity: 12/16 mm Upper & Lower Roll Diameter: 280 mm Hsdpfxow Smfcj Abvjnl Side Roll Diameter: 220 mm Motor Power: 16.5 kW Bending Speed: 1.5 – 5 m/min Length: 4850 mm Width: 1700 mm Height: 1850 mm Weight: 9650 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, galia: 8 kW (10,88 AG), STANDARTINĖ ĮRANGA Plieninė suvirinta konstrukcija Trys motoru varomi volai Iš specialios aukštos stiprumo medžiagos pagaminti ir grūdinti bei šlifuoti velenai Horizontali ir vertikali darbo padėtis Grūdinti standartiniai volų ratai Atskiras nuo įrenginio judrus valdymo pultas Mechaniniai rankiniai šoniniai atmušėjai, judantys 3 kryptimis Tiksli lenkimas su stabdžiu įrengtu varikliu Skaitmeniniai indikatoriai (2 vnt.) PAPILDOMA ĮRANGA Vamzdžių ir profilių lenkimo volai Papildomos dviejų ašių hidraulinės šoninės atmušos Hodsw Smi Iepfx Abvsnl Automatika su NC valdymu TECHNINĖS CHARAKTERISTIKOS Velenų skersmuo: 100 mm Volų skersmuo: 315 mm Darbinis greitis: 7 m/min Variklio galia: 7,5 kW Ilgis: 2000 mm Plotis: 1450 mm Aukštis: 1700 mm Svoris: 3650 kg

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: NC valdymas, pavaros tipas: hidraulinis, ritinėlių skaičius: 3, apatinio volelio skersmuo: 250 mm, viršutinio volo skersmuo: 250 mm, šoninio volelio skersmuo: 200 mm, vėjo ilgis: 1 550 mm, darbinis plotis: 1 550 mm, maks. lakšto storis: 15 mm, plieno lakšto storis (maks.): 15 mm, galia: 7,5 kW (10,20 AG), garantijos trukmė: 12 mėnesiai, STANDARD EQUIPMENT * Side rolls move up and down orbitally via hydraulic pistons * Protected against overloading * All rolls are driven by hydromotors and planetary gearboxes * Folding head enables easy removal of bent workpieces * Very easy operation with movable control panel * Lower roll positions are easily read via two digital displays * Welded steel construction frame * SAE 1050 (CK 45) induction-hardened, hot-rolled steel shafts * Tapered bearing roll bending system * Hydraulic synchronization system for parallel movement of shafts * Extended shaft ends for fitting profile and pipe bending rolls OPTIONAL EQUIPMENT * Top crane (hoist) for large diameter bending support * Hydraulic side supports for large diameter bending * Ground and polished rolls for special applications * Profile bending rolls for section bending * Stepless hydraulic speed adjustment * Electronic synchronization system for parallel movement of shafts TECHNICAL SPECIFICATIONS Bending Length : 1550 mm Pre-bending : 10/12 mm Bending : 12/15 mm Upper & Lower Roll Diameter : 250 mm Side Roll Diameter : 200 mm Motor Power : 7.5 kW Bending Speed : 5 m/min Length : 3500 mm Width : 1200 mm Height : 1370 mm Weight : 3600 kg Hnsdpfx Abexbzr Ujvol

Būklė: naujas, Gamybos metai: 2025, valdymo tipas: CNC valdymas, automatizacijos lygis: automatinis, pavaros tipas: elektrinis, Vamzdžio skersmuo (maks.): 65 mm, Vamzdžio ilgis (maks.): 3 000 mm, Vamzdžio sienelės storis (maks.): 3 mm, Lenkimo kampas (maks.): 190 °, lenkimo spindulys (maks.): 250 mm, ašių skaičius: 5, garantijos trukmė: 12 mėnesiai, Įranga: CE žymėjimas, avarinis stabdymas, dokumentacija / vadovas, kojinis nuotolinio valdymo pultas, STANDARD EQUIPMENT • 3 sets of tooling (1 set of rolling dies and 2 sets of bending dies, or 3 sets of bending dies, according to required dimensions) • 5-axis servo control (Y, B, C, H, V) • Servo-driven feed axis • Servo-driven rotation axis • Servo-driven bending axis • Servo-driven H and V axes Hnsdjxircgopfx Abvel • 21” TFT touch-screen mobile CNC control unit • Rolling capability • 3D bending simulation • Collision simulation • Daily, weekly, and monthly total operating status reports • Workpiece length calculation • Estimated bending time calculation • Conversion from X-Y-Z to Y-B-C • Mobile foot pedal with emergency stop function • Remote assistance • Mandrel bending and non-mandrel bending • Safety plate behind the bending head • Hydraulic clamping • Hydraulic mandrel • Hydraulic support • Hydraulic linear guiding system • Hydraulic jaw clamp • Electrical panel safety lock and lockable panel with key • Electric system cooler • Overload protection • Detailed working report automatically sent OPTIONAL EQUIPMENT (Not included in price) • Additional tooling sets • Safety mat (750 x 1000 mm) • Safety mat (1000 x 1500 mm) • Hydraulic oil heater • Additional mandrel length (up to 6 m) – per meter • Ball mandrel and wiper die • Automatic mandrel lubrication system (for suitable tube diameters) • Hydraulic oil cooler CAPACITY MB-65 CNC / 5 AXIS Maximum capacity mm Ø65x3mm Maximum bending radius mm 250mm Maximum bending angle ° 190° Hydraulic pressure bar 50-200 Working length mm 3000 Rotation tolerances Adjustable Bending power kw 22.5 LxWxH mm 6350x1400x1600 Weight kg 3950

Būklė: naujas, Gamybos metai: 2025, spaudimo jėga: 400 t, eigos ilgis: 60 mm, stalo plotis: 400 mm, stalo ilgis: 4 500 mm, eigos reguliavimas: 100 mm, garantijos trukmė: 24 mėnesiai, Įranga: apsaugos šviesos užtvara, Šie mūsų presai ir padavimo linijos, specialiai sukurti durų ir langų aksesuarų pramonei ir turintys tiek viengubą, tiek dvigubą darbo režimą, užtikrina maksimalų našumą ir ilgalaikį patikimą veikimą. Langų aksesuarų sektoriuje, kur neišvengiama masinė gamyba, mūsų presai ir sukaupta patirtis garantuoja aukščiausią klientų pasitenkinimą. - Presavimo jėga iki 400 tonų - Stalo ilgis iki 6000 mm - 2 arba 3 jungiamųjų strypų pasirinkimas - Automatinis nuolatinio grįžtamojo plono tepimo mechanizmas - Progresyvaus tepimo blokas - Prieiga prie preso iš priekio ir galo - Magnetiniais jutikliais valdomi stumdomieji dangčiai - Indukciškai grūdinti ir šlifuoti krumpliaračiai - Kūginėmis fiksavimo jungtimis tvirtinami krumpliaračiai ir stebulės Hodsxrbpnspfx Abvenl PRESAVIMO JĖGA: 400 TONŲ APSISUKIMAI: 40-70 aps./min EIGA: 60 MM MAKSIMALI FORMOS AUKŠTIS: 340 MM STALO-PRIEKINIO BLOKO AUKŠTIS: 400 MM REGULIAVIMAS: 100 MM VIRŠUTINIO STALO MATMENYS: 500x4500 MM APATINIO STALO MATMENYS: 400x4500 MM VARIKLIS: 30 KW VARIKLIO APSUKOS: 3000 aps./min