Įėjimo Klimato Kamera pirkti naudotą (3 463)

Būklė: labai geros būklės (naudotas), CTS CW-60/11 – Climatic Test Chamber, Water-Cooled The CW-60/6 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber designed for conducting temperature and humidity tests on multiple test specimens simultaneously. Device Description This climatic test chamber enables functional and material property testing of specimens under controlled temperature and humidity conditions. Efficient air circulation with a correspondingly high recirculated air volume ensures optimal transfer of climate to the test specimen. The air handling unit is located at the rear of the internal chamber. The refrigeration and conditioning units are housed in a separate frame behind the chamber and are easily accessible. The control system is installed in a separate switch cabinet, with the operator interface integrated into the cabinet door. For dehumidification, the test chamber is equipped with a self-regenerating compressed air dryer. The chamber can also be purged with fresh air via a blower. Technical Performance Data: Temperature Testing: Temperature range: –60 °C to +90 °C Temperature deviation (over time): ±0.5 to 1 K Temperature deviation (spatial, at 200 mm from wall): ±1 K Temperature change rate (supply air, linear): Heating: 2 K/min from –40 °C to +85 °C Cooling: 2 K/min from +85 °C to –40 °C Climatic Testing: Temperature range: +10 °C to +95 °C Humidity range: 10 % to 95 % r.h. Dew point range: +5 °C to +89 °C Temperature deviation (over time): ±0.5 K Humidity deviation (over time): ±2 – ±5 % r.h. *All specifications without radiant heat, measured in steady-state condition. Data valid for ambient temperature of +25 °C, nominal voltage 400 V, without test material, without irradiation, and without additional equipment. Dimensions: Internal chamber (usable test area): Volume: approx. 11,000 liters (11 m³) Approx. internal dimensions: Width: 2,100 mm, Depth: 2,530 mm, Height: 2,200 mm (may vary slightly depending on configuration) External dimensions: Width: 2,700 mm, Depth: 5,200 mm, Height: 2,520 mm (dependent on doors, frame, accessories, etc.) Operating Data: Nominal power: 84.4 kW Nominal voltage: 400 V 3/N 50 Hz Nominal current: 131.4 A Technical Specification: Refrigeration unit: Water-cooled, low noise, semi-hermetic, infinitely variable output control via electronic monitoring and control system, environmentally friendly refrigerants R 23 / R 404 A Weight: 6,000 kg Notes: Viewing possible by appointment (46325 Borken) Shipping possible via carrier – costs and arrangement upon request Scope of delivery: (see image) Specifications subject to change and possible error. For further questions, we are happy to assist you by phone. Rjdpfx Akex Anipozst

Būklė: labai geros būklės (naudotas), Weiss Model: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial Emission Test Chamber / VOC Test Chamber / Climatic Test Chamber Water-cooled For sale is a professional emission test chamber Weiss Technik EmissionEvent VOC/240 (year of manufacture: 2018) from an industrial laboratory and testing environment. The unit is designed for standard-compliant emission tests under precisely controlled temperature, climate, and process conditions, and is built for continuous use in laboratory, industrial, and quality assurance applications. What does VOC mean / What does the unit do? VOC = Volatile Organic Compounds The unit measures and tests the outgassing (emission) of materials under defined conditions. It is used to determine which substances a material releases into the air. Typical applications: - Emission testing of plastics, components, materials - Automotive interior material tests (odor / pollutants) - Building products & furniture emissions - Packaging, textiles, adhesives, coatings - Quality control and standard-compliant testing (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity, and air parameters. Emissions are extracted from the test chamber using a carrier gas (e.g. nitrogen or air) and can then be measured with analytical instruments. Features / Equipment: - Stainless steel emission test chamber (hermetically sealed) - Temperature and climate control - Carrier gas system for emission measurements - Automated process control with touch panel Rjdjyhfg Djpfx Akzet - Programmable operation / continuous operation possible - Sampling ports for VOC analysis - Industrial-grade design (for laboratory & continuous operation) Specifications for temperature testing: Temperature range: +20 to +130 °C Temporal temperature deviation at test volume center: ±0.1 to ±0.3 K Spatial temperature homogeneity: ±0.1 to ±0.5 K Temperature change rate (per IEC 60068-3-5): Heating: 0.4 K/min Cooling: 0.3 K/min Enhanced heating/cooling performance (average): Heating up to +65 °C: 1.5 K/min Cooling from +65 °C to +20 °C: 1.3 K/min Specifications for climate testing: Temperature range: +20 to +130 °C Dew point range: +5 to +60 °C Humidity range: 5 to 95% rH Temporal temperature deviation: 0.1 to 0.3 K Temporal humidity deviation: -3 to +3% rH Dimensions EmissionEvent VOC/240 External dimensions (unit): Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test chamber): Emission test volume: 200 l Gross test volume: 240 l Net test volume: 208 l Max. test specimen weight: 80 kg Internal dimensions VOC/240: Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: - Voltage: 3/N/PE AC 400 V ±10 % / 50 Hz - Rated power: 12.1 kW - Rated current: 30 A - Protection class: IP54 Refrigerant: R134a – 2.5 kg Weight: approx. 1080 kg Buyer Assurance—Key Points for Our Test Chambers: 1. Functional check and replacement of necessary components 2. New, legally compliant refrigerant filling if necessary 3. Leak test with certificate 4. After successful inspection, the chambers are subject to a documented test run. Condition: used Scope of delivery: (see image) (Technical specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Gamybos metai: 2000, būklė: geras (naudotas), Nema temperatūrinio šoko bandymų kamera -40°C iki +120°C Gamintojas: Nema Tipas: NTS 3000 / 2S Temperatūros diapazonas: -40°C iki +120°C Tinklo įtampa: 400 V Nominali srovė: 88 A Nominali galia: 55 kW Šaltnešis: R 404 A Pagaminimo metai: 2000 Svoris: 5000 kg Išoriniai matmenys: P 4000 x G 2760 x A 3450 mm Kamera: P 3000 x G 1250 x A 1610 mm TS-06 Rsdpfxeuuiays Akzot Taip pat galime pasiūlyti finansavimą per mūsų banką. komplett-konzept.leasingo.de Daugiau prekių – naujų ir naudotų – rasite mūsų parduotuvėje! Tarptautinio pristatymo išlaidos – pagal atskirą užklausą!

Būklė: labai geros būklės (naudotas), Espec Model: PL-2KPH ESPEC PL-2 KPH Climate Chambers, air cooled Temperature range: -40°C to +180°C Humidity range: approx. 10 to 98% RH Dependency on temperature range and humidity fluctuation: ± 2.5% RH over time ± 3.0% RH Internal dimensions: Width 500 × Height 750 × Depth 600 mm External dimensions: Width 910 × Height 1590 × Depth 973 mm Microprocessor control with 10 internationally pre-set test standards and 20 freely programmable memory slots, as well as integrated timer with program start/stop automation and error code display, programming via touch screen. Alarm indicator (acoustic and visual) Device protection in case of overtemperature Overtemperature protection with 2 switching contacts Test chamber lighting Operating hours counter Test chamber volume: 225 l Weight: 300 kg net Electrical connection: 400 V 3/N 50 Hz Plug: CEE 16 A, max. current consumption: 11.0 A Refrigerant: R404A Rodpfx Aksx Iu I Sjzet Scope of delivery: Espec climate test chamber Important safety information for you as a buyer! The following points are carried out on all chambers offered by us prior to sale: 1. Functional test and replacement of necessary components 2. New refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: see image (Changes and errors in technical data and specifications reserved!) If you have further questions, we will be happy to answer them by phone.

Būklė: geras (naudotas), Vötsch Model: VCS 7034-5 Climate Test Chamber, Water-cooled Vötsch VCS 7034-5 Test Chamber Volume: 335 litres Specifications for Temperature Testing: Temperature Range: -70 to +180°C Temporal Temperature Deviation: ±0.1 to ±0.5 K Spatial Temperature Deviation: ±0.5 to ±2.0 K Temperature Gradient: 1 to 4 K Change Rate: Cooling: 6.7 K/min Heating: 6.8 K/min Heat Compensation at +20°C: 3000 W / at -20°C: 3000 W Temperature Calibration Points: +23°C and +80°C Specifications for Climatic Testing: Temperature Range: +10 to +95°C Temporal Temperature Deviation: ±0.1 to ±0.3 K Spatial Temperature Deviation: ±0.5 to ±1.0 K Temperature Gradient: 1 to 2 K Humidity Range: 10 to 98% Temporal Humidity Deviation: ±1 to ±3% Dew Point Range: -3 to +94°C Heat Compensation: 400 W Climatic Calibration Points: +23°C / 50% r.h. and +95°C / 50% r.h. Test Chamber Dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External Dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical Connection: 3/N/PE AC, 400 V ±10%, 50 Hz Rated Power: 10 kW Rodpfjuudx Djx Akzst Rated Current: 21 A Sound Pressure Level: 64 dB(A) Cooling Water Consumption: 1.4 m³/h Refrigerants: R-404A / R-23 Condition: used Scope of Delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) Further questions can be answered by phone.

Būklė: naudotas, Type: CS-70/900 CTS Climate Test Chamber with Humidity, Water-cooled (converted to refrigerant R-452a) Temperature range: -70°C to +180°C Humidity range: 10–98% r.H. Test chamber dimensions: Height approx. 870 mm / Width approx. 1000 mm / Depth approx. 1000 mm Redpoxb Dm Ijfx Akzst External dimensions: Height approx. 1950 mm / Width approx. 1200 mm / Depth approx. 2220 mm Control cabinet: Height approx. 2100 mm / Width approx. 800 mm / Depth approx. 400 mm Test chamber volume: 900 liters Refrigerants: R-452a / R23 Electrical connection: 400 V +6/-10%, 3/N, 50Hz Connected load: 21.2 kW, Rated current: 35.7 A Climate test chamber weight: 900 kg Control cabinet weight: 150 kg Important safety information for the buyer! The following points are carried out in advance on the chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with compliant refrigerant in accordance with legal standards 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical specifications and data!) If you have any further questions, we would be happy to answer them by phone.

Būklė: labai geros būklės (naudotas), Weiss Type: WK3-2200/40/5/V Weiss Climate Test Chamber, Water-Cooled Data for Temperature Testing: Temperature range: -40°C to +180°C Temperature change rate: Heating 6.0 K/min Cooling 11.5 K/min Redow I Rxropfx Akzjt Temperature deviation: Over time: ± 0.8 K Spatial: ± 2.0 K Heat compensation max. 8000 W Data for Climate Testing: Temperature range: +10°C to +95°C Dew point temperature range: +4°C to +94°C with closed floor element Humidity range: 10 to 95% r.h. Temperature deviation over time: ± 0.3 K Humidity deviation over time: ± 3% r.h. Temperature uniformity: Spatial: ± 1.0 K Heat compensation max. 500 W Test chamber volume: 2160 liters Test chamber dimensions: Height 1115 mm, Width 1400 mm, Depth 1400 mm External dimensions (lowered): Height 2318 mm, Width 1860 mm, Depth 3658 mm External dimensions above shaker: Height 2710 mm External dimensions max. stroke height: 3038 mm Interchangeable floor dimensions: Width 1600 mm, Depth 1504 mm Operating Data: Rated voltage: 3/N/PE AC 400V ±10% 50Hz Rated power: 38.0 kW Rated current: 63.0 A Customer-side circuit protection: 80 A slow-blow Refrigerant: R 404A Weight: approx. 2100 kg For your safety as a buyer, please note the following information! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented trial run. Condition: used Scope of delivery: (See picture) (Specifications and details subject to change or error!) We are happy to answer any further questions by phone.

Būklė: naudotas, Vötsch Type: VCS 7034-5 Climate Test Chamber Water-cooled Test Chamber Volume: 335 liters Performance for Temperature Tests Temperature range: -70 to +180°C Temporal temperature deviation: K ±0.1 to ±0.5 Spatial temperature deviation: K ±0.5 to ±2.0 Temperature gradient: 1 to 4 Change rate: Cooling 6.7 K/min Heating 6.8 K/min Heat compensation at +20°C 3000 W / at -20°C 3000 W Temperature calibration values: +23°C and +80°C Performance for Climate Tests Temperature range: +10 to +95°C Temporal temperature deviation: ±0.1 to ±0.3 K Spatial temperature deviation: ±0.5 to ±1.0 K Temperature gradient: 1 to 2 K Humidity range: 10 to 98% Temporal humidity deviation: ±1 to ±3% Dew point range: -3 to +94°C Heat compensation: 400W Climate calibration values: +23°C / 50% r.h. and +95°C / 50% r.h. Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Electrical connection: 3/N/PE AC, 400 V ±10% 50 Hz Rated power: 10 kW Rated current: 21 A Sound pressure level: 64 dB(A) Cooling water consumption: 1.4 m³/h Refrigerant: R-404A / R-23 For your security as a buyer, please note the following: The following steps are performed in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, new charging with legally compliant refrigerant 3. Leak test with certification 4. After successful inspection, the chambers undergo a documented test run Condition: used Scope of delivery: (See photo) (Technical data subject to change and errors excepted!) We are happy to answer further questions by phone. Rodpfx Akouxq T Dozet

Būklė: geras (naudotas), Vötsch Model: VCS 7130-15 Vötsch Climate Test Chamber, Water-Cooled Specifications for Temperature Testing: - Temperature range: -70°C to +180°C - Temporal temperature deviation at chamber center: ±0.3 to ±0.8 K - Spatial temperature deviation: ±0.5 to ±2 K - Temperature gradient: 1 to 4 K - Rate of temperature change: - Heating: 16 K/min - Cooling: 14.5 K/min Specifications for Climatic Testing: - Temperature range: +10°C to +95°C - Humidity range: 10 to 98% RH - Temporal temperature deviation at chamber center: ±0.1 to ±0.3 K - Spatial temperature deviation: ±0.5 to ±1 K - Temperature gradient: 1 to 2 K - Temporal humidity fluctuation at chamber center: ±1 to ±3 %RH - Maximum heat compensation: 8000 W Cabinet Dimensions: - External dimensions (with hinges and door lock): - Height: 1,995 mm - Width: 1,680 mm - Depth: 1,855 mm - External dimensions (without hinges and door lock): - Height: 1,995 mm - Width: 1,300 mm - Depth: 1,855 mm - Internal chamber dimensions: - Height: 950 mm - Width: 1,100 mm - Depth: 950 mm - Test chamber volume: approx. 1,300 liters Redpfx Aswvgwbekzet Feedthroughs: Feedthroughs are installed on the right and left sides of the test chamber allowing test leads and probes to be routed into the chamber. - 1 x R1 NW 125 mm - 1 x R1 NW 140 mm - 1 x L1 NW 50 mm Test Chamber Illumination: - Halogen bulb: 24 V, 50 W Electrical Data: - 3/N/PE AC 400 V ±10% 50 Hz - Rated power: 44.0 kW - Rated current: 63.0 A - Customer-supplied fuse: 100 A (slow-blow) - Maximum heat emission to the environment: 2.2 kW Permissible Sample Weight: - Maximum total shelf load: 100 kg - Chamber floor: 150 kg, removable shelf: 50 kg Refrigerants: R 404A / R 23 Weight: 1,900 kg For your security as a buyer, please note the following information! The following steps are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If needed, refill with legally compliant refrigerants 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications may be subject to changes and errors!) For further inquiries, we are happy to assist you by phone.

Būklė: labai geros būklės (naudotas), Atlas Type: SC 350 MHG Atlas Solar Climate Test Chamber, Air-Cooled For sale is an ATLAS SC-340 MHG SolarClimatic Test Chamber (climate chamber with sunlight simulation using an MHG lamp). The unit is suitable for conducting standardized weathering and aging tests under combined exposure to radiation, temperature, and climate conditions. Features & Special Equipment: - Precise temperature and humidity control - Integrated humidification system with water tank Rjdpfx Akoxbd Raszet - Cooling via water or air system (optional) - Feedthroughs for measurement lines provided - Control via operating panel or interfaces (RS232 etc.) - Durable test chamber floor, loadable up to 60 kg (optionally reinforced up to 150 kg) General Data: Model: SC 340 MHG Test chamber volume: approx. 335 liters Cabinet weight: approx. 500 kg Illumination unit weight: approx. 65 kg Technical Data: Test volume: 340 l (internal dimensions 580 × 765 × 750 mm) External dimensions (W×D×H): 865 × 1,595 × 2,180 mm Radiation source: 1 × 1,200 W MHG lamp Irradiance: 800–1,200 W/m² Illuminated area: approx. 3,300 cm² Weathering: Spectrum 300–3,000 nm, standard-compliant tests according to DIN 75220, IEC 60068-2-5, MIL-STD-810F Temperature range with irradiation: –20 °C to +100 °C (±1 K) Temperature range without irradiation: –30 °C to +100 °C (±0.1–0.5 K) Heating/cooling rates: 3.0 K/min (heating), 2.5 K/min (cooling, without irradiation) Noise level: approx. 58 dB(A) at 1 m distance Power supply: 400 V, 3/N/PE, 50 Hz Power consumption: max. 6.2 kW, 16 A Refrigerant: R-404A Weight: approx. 565 kg For your safety as a buyer, please note the following information! The following measures are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. New filling with legally compliant refrigerant if required 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Changes and errors in technical data and specifications reserved!) For further questions, please feel free to contact us by phone.

Būklė: geras (naudotas), Weiss Model: WK3-600/70 Climate Test Chamber, Water-Cooled Data for Temperature Tests: Temperature Range: -70°C to +180°C Temperature Change Rate: Heating: 4.0 K/min Cooling: 2.5 K/min Temperature Deviation: Over time: ± 0.1 to ± 0.5 K Spatial: ± 0.5 to ± 1.5 K Maximum Heat Compensation: 2500 W Data for Climate Tests: Temperature Range: +10°C to +95°C Dew Point Range: -3°C to +94°C Humidity Range: 10 to 98% RH Temperature Deviation (over time): ± 0.1 to ± 0.3 K Temperature Deviation (spatial): ± 0.5 to ± 1 K Humidity Deviation (over time): ± 1 to ± 3 % RH Temperature Uniformity (spatial): ± 0.5 to ± 1.0 K Maximum Heat Compensation: 500 W Test Chamber Capacity: 600 liters Test Chamber Internal Dimensions: Height 950 mm, Width 800 mm, Depth 800 mm External Dimensions: Height 1998 mm, Width 1000 mm, Depth 1745 mm Operational Data: Rated Voltage: 3/N/PE AC 400V ±10% 50Hz Rated Power: 9.1 kW Rated Current: 19.0 A Refrigerants: R 404A & R23 Weight: 680 kg For your peace of mind as a buyer, please note the following information: The following work is carried out on all chambers we offer prior to sale: 1. Function test and replacement of necessary components Rjdpfx Ajw Inmmekzot 2. If needed, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, each chamber undergoes a documented trial run. Condition: used Scope of delivery: (see image) (Specifications and technical data subject to change and error!) We are happy to answer any further questions by phone.

Būklė: labai geros būklės (naudotas), Here we offer a Weiss climate test chamber. Water-cooled Test chamber lighting: Halogen bulb 24V, 50W Data for temperature tests: Temperature range: -40°C to +180°C Temporal temperature deviation at center of working space: ± 0.3 to ± 0.8 K Spatial temperature deviation: ± 0.5 to ± 2 K Temperature change rate: Redpjq Dpzyjfx Akzot Heating: 10 K/min Cooling: 12.5 K/min Heat compensation at +20°C: 8000 W Heat compensation at -20°C: 3000 W Data for climate (humidity) tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98% r.h. Temporal temperature deviation at center of working space: ± 0.2 to ± 0.5 K Spatial temperature deviation: ± 0.5 to ± 1 K Temporal humidity fluctuation at center of working space: ± 1 to ± 3% r.h. Test chamber dimensions: Height 950 mm, Width 760 mm, Depth 650 mm External dimensions: Height 2025 mm, Width 1090 mm, Depth 2480 mm Rated voltage: 3/N/PE AC 400 V ± 10%, 50 Hz Rated current: 24 A Nominal power: 16.0 kW Refrigerant: R452A Weight: approx. 900 kg Type: WK-480/40/10 For your safety as a buyer, please note the following information! The following points are performed on our offered chambers in advance: 1. Functional inspection and replacement of necessary components 2. Refill with legally compliant refrigerant if necessary 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data are subject to change and errors!) We are happy to answer further questions by phone.

Būklė: labai geros būklės (naudotas), Weiss Type: WK11-1000/40 For sale is a professional climate test chamber Weiss Umwelttechnik WT-WK 1000/40 with fully automatic cold-regenerating adsorption dryer. The existing fittings in the test chamber can be removed if required. Currently, due to these fittings, the control cabinet is limited to a temperature range of −40°C to +60°C. After removing these fittings, the manufacturer can restore the standard temperature range of −40°C to +180°C, as the current fittings are not suitable for higher temperatures. The unit is ideal for precise temperature and humidity testing of components, assemblies, and devices. Perfect for applications in industry, development, quality assurance, and research. Weiss climate test chamber, water-cooled Specifications for temperature tests: Temperature range: -40°C to +60°C Temperature fluctuation (temporal, in center of working space): ±0.1 to ±0.5 K Temperature deviation (spatial): ±0.5 to ±2.0 K Temperature rate of change: Heating: 4 K/min Cooling: 3 K/min Specifications for climate tests: Temperature range: +10°C to +95°C Humidity range: 10 to 98 % RH Temperature fluctuation (temporal, in center of working space): ±0.1 to ±0.3 K Temperature deviation (spatial): ±0.5 to ±1 K Humidity fluctuation (temporal, in center of working space): ±1 to ±3% RH Heat compensation: Within +25°C to +95°C to a relative humidity of up to 90%: 500 W Humidification system data: Tank volume: 20 l Water quality: demineralized pH value: 6 to 7 Conductivity: 5 to 20 µS/cm³ Water consumption at constant +40°C, 92% RH: 21 l/24 h Temperature gradient (according to IEC 60068-3-5): 1 to 2 K Test chamber inner dimensions: Height: 950 mm, Width: 1100 mm, Depth: 950 mm External dimensions: Height: 1980 mm, Width: 1385 mm, Depth: 1850 mm Test chamber volume: approx. 990 liters Rated voltage: 3/N / PE AC 400 V +10% 50 Hz Rated power: 11.5 kW, Rated current: 22.0 A Refrigerant: R 404A Weight: 840 kg Rodpfx Aox Hxkzokzet For your safety as a buyer, please note the following: The following points are routinely carried out on chambers we offer: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, a documented trial run is performed on the chambers. Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data, specifications) If you have further questions, we are happy to answer them by phone.

Būklė: naujas, Gamybos metai: 2025, Clamping force 240 kN Clamping plate 380x380 mm Distance between tie bars 250x250 mm Machine weight approx. 3.0 t Clamping stroke 180 mm Ejector force 28 kN Rodox Hp E Ajpfx Akzjt Ejector stroke 50 mm Mould height 120–300 mm Tie bar diameter 45 mm Injection force 43 kN Injection stroke 85 mm Injection plunger diameter 36, 40, 45 mm Injection volume (DIN 24480) 47, 63, 87 cm³ Specific injection pressure 420, 340, 270 daN/cm² Relevant parting surface 56, 70, 88 cm² Ejector return stroke 150 mm Machine Equipment 1.0.2 Clamping unit cover on machine frame for scale / chute 1.0.3 Small parts cover in machine frame 1.1.0 Motorized safety door, die-casting side left 1.4.0 Machine mountings 1.5.4 Machine interior lighting 1.11.0 Equipment package – energy efficiency 2.0.1.2 Ejector assistance package Technology incl. SensiEject 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.0.1.2 Injection assistance package Technology incl. SensiInject 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-filling injection system 3.4.5 Simplified injection plunger removal 3.4.6 Injection plunger stop on return stroke 3.5.2 Electric nozzle and injection chamber heating 3.5.3 Pluggable connectors for electric nozzle and injection chamber heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance advantage package 5.6.1 Cable lengths 6.1.3.1 Wired signal interface for parts removal unit DISPO10 6.1.4 Serial interface for 4 heating/cooling circuits 6.1.5 Interface for vacuum unit 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD equipment package with switch 7.2.1.2 Spraymotion 411 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent tank TD 20 7.4.0.1 Spray bar CR 155

Būklė: naujas, Gamybos metai: 2020, Clamping force: 600 kN Clamping platen: 460 x 460 mm Tie bar spacing: 300 x 300 mm Clamping stroke: 230 mm Ejector stroke: 70 mm Ejector force: 40 kN Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 54 kN Injection stroke: 130 mm Injection piston diameter: 45, 50, 55 mm Casting volume (DIN 24480): 109, 150, 194 cm³ Specific injection pressure: 339, 274, 226 daN/cm² Associated parting surface: 176, 218, 264 cm² Machine weight: approx. 3.5 t Machine equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale/chute 1.1.0 Motorized safety door, casting direction left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Advantage package ejector 2.4.2 Ejector plate lock, mould side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Casting system pre-fill 3.4.5 Simplified injection piston removal 3.4.6 Injection piston stop on return stroke 3.5.2 Electric nozzle and casting pot heating 4.5.0 Hydraulic assembly shut-off device 4.6.1.2 Integrated water circuit control, 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Equipment package – casting comfort 5.2.1 Ejector pressure graph Rodpfeiu Smbox Akzet 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction unit 6.1.4 Serial interface for 4 heating/cooling circuits 6.3.1.1 Operator unit with visualisation on support arm 6.5.2 Equipment package RSD with switch 7.0.0 ADDITIONAL DEVICES 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying programme 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Sound-insulated reject chute OF70 70 Years FRECH – Anniversary Package

Būklė: naudotas, Gamybos metai: 1995, Clamping force: 2200 kN Clamping platen: 755x755 mm Tie bar distance: 500x500 mm Machine weight: approx. 8 t Clamping stroke: 430 mm Ejector force: 110 kN Ejector stroke: 100 mm Rsdpsvxlufefx Akzst Die height: 250-600 mm Tie bar diameter: 85 mm Injection force: 130 kN Injection stroke: 175 mm Injection plunger diameter: 70, 80, 90 mm Injection volume (DIN 24480): 450, 636, 856 cm³ Specific injection pressure: 335, 260, 203 kp/cm² Associated parting surface: 656, 846, 1078 cm² Withdrawal stroke: 230 mm Used die casting machine DAW 200 S with Datavario control system for processing zinc alloys. Available upon agreement. The manufacturer's recommendation is a general overhaul at a certified service center. The scope of the overhaul can be agreed upon.

Būklė: naudotas, Gamybos metai: 1994, Clamping force: 600 kN Clamping platen: 460 x 460 mm Tie bar spacing: 300 x 300 mm Redpotuxmysfx Akzjt Machine weight: approx. 4.5 t Clamping stroke: 230 mm Ejector force: 40 kN Ejector stroke: 70 mm Mould height: 120–350 mm Tie bar diameter: 56 mm Injection force: 55 kN Injection stroke: 130 mm Injection piston diameter: 45, 50, 55 mm Injection volume (DIN 24480): 76, 121, 165 cm³ Specific injection pressure: 345, 280, 231 kp/cm² Corresponding parting surface: 174, 214, 260 cm² Ejector withdraw stroke: 150 mm Used machine: DAW 50 as a basis for a complete overhaul, without control cabinet, furnace, or furnace cabinet. A general overhaul can be carried out at the manufacturer’s refurbishment facility. The scope of the overhaul can be agreed upon on an individual basis.

Būklė: naujas, Gamybos metai: 2024, Clamping force: 900 kN Clamping platen: 540 x 540 mm Distance between tie bars: 350 x 350 mm Machine weight: approx. 5.3 t Clamping stroke: 280 mm Ejector force: 61 kN Ejector stroke: 70 mm Mold height: 160-400 mm Tie bar diameter: 65 mm Injection force: 78 kN Injection stroke: 130 mm Injection plunger diameter: 50, 55, 60 mm Injection volume (DIN 24480): 147, 191, 241 cm³ Specific injection pressure: 396, 327, 275 daN/cm² Associated parting surface: 226, 274, 326 cm² Eject stroke: 220 mm Machine Equipment 1.0.2 Clamping unit cover on base frame for scale / chute 1.1.0 Motorized safety door on injection side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package - Energy efficiency 2.0.1 Ejector advantage package 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.0.1 Injection assistance advantage package 3.2.9 EcoMelTec multi-chamber holding and melting furnace 3.4.4 Pre-filling injection system 3.4.5 Simplified injection plunger removal Rjdpfx Asr Hwf Aokzet 3.4.6 Injection plunger stop on return stroke 3.5.2 Electric nozzle and injection chamber heating 3.5.3 Plug connectors for electric nozzle and injection chamber heating 4.5.0 Shut-off device for hydraulic assemblies 4.6.1.3 Integrated water circuit control 2+6 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.5 Maintenance advantage package 5.6.1 Special cable lengths 6.1.3.1 Digital interface for third-party extraction unit 6.1.4 Serial interface for 4 heating-cooling circuits 6.1.5 Interface for vacuum device 6.3.1.1 Control unit with visualization on support arm 6.5.2 RSD equipment package with switch 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spray program 7.3.1 Release agent container TD 20 7.4.0.3 Spray bar CR 275

Būklė: naudotas, Gamybos metai: 1980, Funkcionalumas: nepatikrintas, mašinos/transporto priemonės numeris: GTTS 220, bendras aukštis: 144 mm, bendras ilgis: 135 mm, bendras plotis: 96 mm, Įranga: dokumentacija / vadovas, Naudota Votsch/Weiss GTTS 220 klimato kamera Gamintojas: Votsch/Weiss Modelis: GTTS 220 | 20 Rodpfxsx H N Dre Akzjt Išoriniai matmenys: 135 cm x 96 cm x 144 cm (ilgis x plotis x aukštis) Didžiausi vidaus matmenys: 65 cm x 92 cm x 54/40 cm (plotis x gylis x aukštis) Įtampa: 220/380 V Šaltnešio tipas: R12 Su instrukcijų vadovu (įrengimo ir eksploatavimo vadovas)

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, rida: 148 000 km, galia: 103 kW (140,04 AG), pirmoji registracija: 01/2024, kuro tipas: dyzelinas, kita apžiūra (TÜV): 05/2028, spalva: balta, sėdimų vietų skaičius: 3, Įranga: ABS, Bluetooth, kruizo kontrolė, oro kondicionavimas, oro pagalvė, pilna techninės priežiūros istorija, stumdomos durys, sunkvežimio registracija, suodžių filtras, vairo stiprintuvas,

Būklė: naujas, rida: 10 km, galia: 133 kW (180,83 AG), kuro tipas: dyzelinas, bendras svoris: 3 500 kg, kuras: dyzelinas, spalva: balta, pavaros tipas: mechaninis, emisijos klasė: Euro 6, pakaba: plienas, Įranga: ABS, autonominis šildytuvas, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kruizo kontrolė, navigacijos sistema, oro kondicionavimas, oro pagalvė, priekabos jungtis, priešrūkiniai žibintai, statymo jutikliai, sunkvežimio registracija, suodžių filtras, sėdynės šildytuvas, trauki kontrolė, vairo stiprintuvas, vasarinės padangos, visų sezonų padangos, žieminės padangos,

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, garantijos trukmė: 6 mėnesiai, įėjimo įtampa: 400 V, paskutinio kapitalinio remonto metai: 2025, Tarpinė brandinimo kamera KEMPER BIP 72 – 6 eilės (188/216) Tarpinė brandinimo kamera BIP 72 yra specialiai sukurta automatinėms tešlos fermentacijos procesams tarp apvalinimo ir formavimo etapų. Rjdpfx Akexnka Uezot Techniniai duomenys: - Grynoji talpa 188, bendroji 216 formelių – 36 lopšiai po 6 formeles (kiekviename lopšyje); - Našumas – padavimas naudojant sinchroninę juostą

Būklė: geras (naudotas), Gamybos metai: 2001, Funkcionalumas: visiškai funkcionalus, darbinis plotis: 1 300 mm, - Gamintojas: Cefla - Tipas: EASY- - Pagaminimo metai: 2001 - Darbinis plotis: 1300 mm - Dešinė eksploatacijos pusė - Tikra būklė, nerenovuota mašina - Duo tipo pistoletinis pavara - Sausas oro ištraukimas - Oro ištraukimo našumas: 12 000 m³/h - Juostinis transportavimo sistema - Begalinio reguliavimo transportavimo greitis 2 - 8 m/min - Juostos valymas voleliniais - Su dažų atkūrimo sistema - Sumontuota purkštuvų: 4 vnt. vienam lakavimo ciklui - Purkštuvo tipas: Kremlin AVX - Purškimo sistema: Airmix - Aukščio reguliuojami purkštuvai - Dažų siurblių kiekis: 2 vnt. - Siurblių gamintojas Kremlin - Lubų ventiliuojamo oro filtras - Tinka vandens pagrindu pagamintiems dažams - Naudota mašina, gera būklė - Gardina oro džiovinimo tuneliai su papildomais IR šildytuvais - Papildomas UV lempų modulis Gardina GST Rjdpfoylhm Ujx Akzet

Būklė: naudotas, rida: 540 173 km, galia: 139 kW (188,99 AG), pirmoji registracija: 02/2018, kuro tipas: dyzelinas, tuščias svoris: 3 775 kg, didžiausias leistinas svoris: 3 715 kg, bendras svoris: 7 490 kg, ašių konfigūracija: 4x2, ratų bazė: 3 690 mm, spalva: balta, vairuotojo kabina: miegamoji kabina, pavaros tipas: pusiau automatinis, emisijos klasė: Euro 6, pakaba: plienas-oras, sėdimų vietų skaičius: 2, Įranga: ABS, autonominis šildytuvas, kruizo kontrolė, oro kondicionavimas, trauki kontrolė,

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, rida: 34 966 km, galia: 132 kW (179,47 AG), kuro tipas: dyzelinas, pavaros tipas: automatinis, bendras svoris: 3 500 kg, tuščias svoris: 2 255 kg, didžiausias leistinas svoris: 1 245 kg, pirmoji registracija: 11/2024, kita apžiūra (TÜV): 05/2028, krovimo vietos ilgis: 4 070 mm, krovinių skyriaus plotis: 1 870 mm, krovos erdvės aukštis: 1 932 mm, emisijos klasė: Euro 6, spalva: balta, sėdimų vietų skaičius: 3, ankstesnių savininkų skaičius: 1, Gamybos metai: 2024, mašinos/transporto priemonės numeris: EULW1880, Įranga: ABS, borto kompiuteris, centrinis užraktas, elektroninė stabilumo programa (ESP), imobilaizerio sistema, kruizo kontrolė, naudoto automobilio garantija, navigacijos sistema, oro kondicionavimas, oro pagalvė, papildomi žibintai, statymo jutikliai, stumdomos durys, sunkvežimio registracija, suodžių filtras, vairo stiprintuvas, visų sezonų padangos,