Vsi Sand Maker / Sand Making Machine Smulkinimo Įranga pirkti naudotą (84 261)

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Samco Unilev 15 Edge Sander Lsdpfxeycpz Ue Afnoac Belt dimensions: 150 x 2170 mm Two belt speeds Adjustable shoe Table adjustable from 0 to 30 degrees Adjustable sanding height Pneumatic sanding belt tensioning Sanding belt oscillation Motor power: 3 kW

Būklė: naudotas, Gamybos metai: 2023, veikimo valandos: 5 189 h, Equipment: Basic Package Inventhor 9: Lodpfx Ajyu Snujfneac MTU diesel engine 6R1300, 390 kW at 1,700 rpm, complies with emission standard EUROMOT V Auxiliary hydraulic connection 30 l/min and 70 l/min Roll drive via planetary gearbox 380 kW – VARIO – Load-sensing system Fuel tank 950 liters Longitudinal conveyor: belt length 4,450 mm, belt width 1,000 mm Centrally positioned lubrication strips 24 V electric control system Additional electric pump for operating the following functions while the engine is off: “Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower optional permanent magnet belt, raise/lower optional folding hopper” Complete radio remote control Large side fiberglass (GRP) maintenance doors Service-friendly engine compartment with LED lighting Hydraulically reversible fan Loading protection on both sides Fire extinguisher Maintenance ladder Toolbox Audible start-up warning Doppstadt telematics system Paintwork: RAL2011 deep orange Additional Equipment: 500 mm flat track undercarriage unit Watering system with hopper extension H=300mm on both sides Shredding system Size "L" - VARIOMAT (Variomat-System L600/4 - 42 teeth) Rear conveyor length 7 m, 1,200 mm wide Size "L" - "Limiter" (20 pieces) LED lighting package engine compartment and rear Central lubrication with pump Delivery date by arrangement

Būklė: naudotas, Gamybos metai: 1984, Used machine Year of manufacture: 1984 Condition: fully inspected and serviced Features and technical data: - Incl. combination aggregate with contact roller and sanding pad - With height-adjustable contact roller for calibration - With workpiece-controlled air cushion pressure shoe - 4-way adjustable grit compensation - With pneumatic belt tensioning device - With rotating structuring brush at the machine's outfeed side - Sanding width: 1350 mm - Sanding belt length: 1900 mm - Pass-through height: 150 mm Laedpfjw R Hh Uex Afnjc - Main motor: 15 kW - Feed speed steplessly adjustable from 2.5 - 12.5 m/min - With roller table at the infeed - With separate additional structuring brush - With roller table at the outfeed - With digital display device for the electromotor-driven workpiece thickness adjustment - With automatic workpiece thickness adjustment - Extraction connection 2 x 200 mm - Feed belt is usable; has damage in one area (see photo) Dimensions: approx. 2300 x 2000 x 2300 mm Weight approx.: 2500 kg Pictures show the machine in unchecked condition! Availability: short-term Location: Röllbach

Gamybos metai: 2014, būklė: nepatikrintas (naudotas), Šlifavimo agregatų skaičius: 6 vnt. Šlifavimo plotis: 180 mm Maks. šlifavimo aukštis: 150 mm STAEHLE šlifavimo staklės, modelis Gloria/Saturn E 180 RF ----- Stähle Hess galutinio šlifavimo staklės modelis Saturn E 180 RF (anksčiau Gloria) su 2 šlifavimo agregatais, papildomai viršutine ir apatiniu Roto Finish šlifavimo įrenginiu. 1 viršutinis šlifavimo juosta 1 apatinis šlifavimo juosta Lsdpfx Afjx Dng Dsnjac 2 viršutinės Roto-Finish šlifavimo įrenginiai 2 apatinės Roto-Finish šlifavimo įrenginiai Išsami techninė informacija pateikta gamintojo pridėtame PDF faile. Parduodama pagal kliento užsakymą. Nuotraukos yra iš mūsų archyvo ir padarytos prieš pristatant stakles klientui. (Techniniai duomenys pagal gamintojo informaciją – be garantijos!)

Gamybos metai: 2022, būklė: nepatikrintas (naudotas), Number of sanding units: 6 pcs. Sanding width: 45–165 mm Max. sanding height: 45–92 mm Weight: 2200 kg Ecoline Q-SAND 6 For sale on behalf of a customer ---- Full description available as PDF attachment! Brief description: Machine with infeed conveyor and automatic height detection. It features 2 top and 2 bottom sanding discs, each integrated with a brushing unit. Technical manufacturer description: Ecoline Q-Sand: the ideal sander for scantlings and more. Designed to work on both sides of the workpiece with three-dimensional adjustment, the Q-Sand ensures maximum precision and uniformity. It is equipped with sanding discs, flap brushes, and a double disc for more effective material removal, enhancing adhesion for subsequent treatments. Q-Sand can be installed in-line or used as a standalone unit due to its fully autonomous operation. It is also ideal for window frames, beams, and custom products, optimizing processing times with automated systems and advanced production control. ---- Price for the above-mentioned machine on request! ---- Laodpexyafkjfx Afnjc (Technical information as per manufacturer's data – subject to change!) All prices quoted are net plus statutory VAT. The video is provided by Ecoline and shows a new machine.

Būklė: geras (naudotas), Gamybos metai: 1994, Osciliacija: taip / ne Masinių detalių šlifavimo įrenginys: taip / ne Faneros šlifavimo įrenginys: taip / ne Pakreipiamas iki 30 laipsnių Variklio galia: 2,8 kW Stalo dydis: 850 x 300 mm Šlifavimo plotis: 150 mm Svoris: 330 kg - elektrinė osciliacija Laodpfezfqkzox Afnsc - faneros šlifavimo įrenginys - važiuoklė / transportavimo įrenginys

Būklė: geras (naudotas), Gamybos metai: 1993, Stalo dydis 800 x 2790 mm Išpjova 550 x 310 mm Lsdpfx Afjzfqkhsnjac Pagrindinio variklio galia 4,0 kW Šlifavimo juostos matmenys 150 x 7800 mm Darbo ilgis 2600 mm Darbo plotis 850 mm Ištraukimo jungties skersmuo 180 mm - Elektrinis stalo pakėlimas - Dešinė/kairė eiga - Įrenginio svoris 650 kg

Būklė: naudotas, Gamybos metai: 1997, įskaitant 3 volelių padavimo įrenginį Variklis: 2,2 kW elektrinė osciliacija Juostos greitis: apie 22 m/s aukščio reguliuojamas šlifavimo stalas Stalo dydis: 1000 x 350 mm be žingsnių pasukamas šlifavimo agregatas nuo 0 iki 45° Kampo skalė ir mechaninis užraktas atidaroma faneruotų briaunų šlifavimo įranga Aliumininis šlifuoklio padas aukščio reguliuojamas radiusinis šlifavimo stalas centrinė ištraukimo jungtis: Ø 140 mm Šlifavimo juosta: 3000 x 150 mm Sandėliavimo vieta: Nattheim Lajdpfx Afoy Dd Igsnsc

Būklė: naudotas, Gamybos metai: 2021, veikimo valandos: 4 689 h, Equipment: Basic package Inventhor 9: - MTU diesel engine 6R1300, 390 kW at 1,700 rpm, compliant with EUROMOT V emission standard - Additional hydraulic connection 30 l/min and 70 l/min - Roller drive via planetary gearbox 380 kW – VARIO – Ljdpfx Afoyu Svxonjac - Load-sensing system - Fuel tank 950 liters - Longitudinal conveyor: belt length 4,450 mm, belt width 1,000 mm - Centrally arranged wear strips - 24 V electric control system - Additional electric pump to operate the following functions when the engine is off: "rear conveyor raise/lower/fold, comb flap open/close, comb open/close, optional permanent magnet conveyor raise/lower, optional folding hopper raise/lower" - Complete radio remote control - Large side fiberglass maintenance doors - Maintenance-friendly engine compartment with LED lighting - Hydraulically reversible fan - Bilateral loading protection - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paintwork: RAL2011 deep orange Additional equipment: - 3-axle semi-trailer running gear assembly - Size "L-C3" - VARIOMAT shredding system - Size "L" - "Limiter" (20 units) - Hydraulic drive unit - Dual-sided watering - Rear conveyor 8.5 m, 1,200 mm wide - Overband magnet neodymium - Frame for overband magnet neodymium - Central lubrication with pump - LED lighting package for engine compartment and rear Delivery date by arrangement

Būklė: geras (naudotas), Gamybos metai: 1990, gebrauchte Bürstmaschine mit Vakuumtisch Ljdpfed Tanyjx Afnjac

Būklė: labai geros būklės (naudotas), Gamybos metai: 2000, veikimo valandos: 10 900 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 16 000 kg, galia: 308 kW (418,76 AG), Willibald MZA 3500/smulkintuvas/smulkinimo įrenginys/trupintuvas • Gamintojas: Willibald • Modelis: MZA 3500 • Metai: 2000 • Darbo valandos: 10 900 val. • Variklis: MAN D 2876, 6 cilindrų dyzelinis Lodpfxozdtzmj Afnjac • Galia: 308 kW / 418 AG • Praėjimo angos plotis: 500 mm • Ašių skaičius: 2 tandem • Stabdžių sistema: suslėgto oro • Smulkinimo peilių kiekis: 48 • Rotoriaus apsisukimai: 1300 aps./min. • Žiedinė jungtis: 40 mm • Organinės medžiagos smulkinimas kompostavimui iki 30 cm skersmens • Senos ir atliekų medienos smulkinimas iki 30 cm skersmens • Bendras svoris: 16 000 kg • Vokiška mašina • Paruošta naudoti iš karto • Šis pasiūlymas yra neįpareigojantis ir gali būti keičiamas. - Tarpinis pardavimas galimas - Klaidos ir/arba rašybos klaidos galimos - Parduodama pagal mūsų bendrąsias sąlygas.

Būklė: naudotas, Gamybos metai: 1994, Šlifavimo juostos aukštis 150 mm, šlifavimo juostos ilgis 2280–2290 mm, juostos greitis 22 m/s, dvikryptis šlifavimas su osciliacija, važiavimo įrenginys, faneros šlifavimo įranga, galinis/radiusus šlifavimas su mažu atraminiu stalu, plokštuminis šlifavimas su pasviruoju stalu, juostos dešinės/kairės krypties eiga. Sandėliavimo vieta: Nattheim. Lsdpozd Hngjfx Afneac

Būklė: naudotas, galia: 185 kW (251,53 AG), pavaros tipas: automatinis, kuro tipas: dyzelinas, pirmoji registracija: 01/2017, emisijos klasė: Euro 4,

Būklė: naudotas, Gamybos metai: 1953, Šlifavimo disko skersmuo x plotis apie 200 x 25 mm Magnetinė tvirtinimo plokštė apie 450 x 170 mm Stalo skersinis judėjimas 200 mm Šlifavimo veleno aps./min – 3000 Lsdpfxexu Nw Eo Afneac Šlifavimo disko skylė 51 mm Svoris apie 1300 kg Šlifavimo galvutės reguliavimo tikslumas 0,001 – 0,013 mm Šlifavimo ilgis 600 mm Plokščiojo šlifavimo staklės Įskaitant šlifavimo disko nuėmimo įrenginį 1 papildomas šlifavimo disko laikiklis Staklės iki paskutinio laiko buvo naudojamos retkarčiais.

Būklė: naudotas, Gamybos metai: 1980, Popierinių maišelių gamybos mašina 3 spalvų inline fleksografinė spauda Lodpsy Umq Ssfx Afnjac Fotoelementas Maišelio plotis: 170 - 280 mm Vamzdelio ilgis: 300 - 600 mm Gussetas (išskleidimas): 60 - 150 mm

Būklė: naudotas, Gamybos metai: 2003, Kvadratinių bandelių gamybos mašina su mirkymo stotimi ir grūdų apvoliojimo stotimi • Mirkymo stotis Laedpfx Aey Uklaefnec • Grūdų apvoliojimo stotis • Mašina atvežta iš Vokietijos Mašina veikianti Taip pat siūlome platų naudotos duonos ir konditerijos įrangos pasirinkimą. Kviečiame susisiekti — bendraujame anglų, vokiečių ir rusų kalbomis.

Būklė: naujas, Gamybos metai: 2025, Nauja mašina Pagaminimo metai: 2025 Vienpusė briaunų šlifavimo staklės Rankinis perjungimas nuo masyvo šlifavimo prie faneruotės šlifavimo Patentuotas atlenkiamų atramų įrenginys Su šlifavimo juostos oscilacija Šlifavimo bloko pasvyrimas 0–45° pagal skalę, rankinis Lasdpfsx Rv Dyox Afnec Variklis 2,2 kW Osciliacinis eigos ilgis 5 mm Darbo stalas 400 x 1100 mm Šlifavimo juostos plotis 150 mm Ištraukimo jungtis 100 mm Užimamas plotas 600 x 1080 mm Svoris apie 400 kg Prieinamumas: iš karto Sandėlio vieta: Flörsheim

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Atbulinis smūginis trupintuvas OMT modelis 800 MFI, puikios būklės su pagrindu – Naudotas Laedpfxjy H E Rne Afnoc

Būklė: labai geros būklės (naudotas), Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, galia: 242,71 kW (329,99 AG), Mobilus smulkintuvas Dyzelinis variklis: 330 AG Sietas (skylės: 120 mm) Nuotolinis valdymas Originalūs transporto priemonės dokumentai. Aptarnavimas: 2026-04 Naujos padangos: 2026-04 Laodpfxjy Duuwe Afnoc Labai gera ir paruošta darbui būklė.

Būklė: naujas, Number of sanding units: 4 pcs. Sanding width: 190 mm Maximum sanding height: 180 mm LÖWER - DoubleSander Solid DSM 2004 ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. Robust heavy-duty design with innovative features. Suitable for continuous operation, even with higher material removal rates. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, from both top and bottom 1. Belt sanding unit with heavy steel roller 2. Belt sanding unit with rubberized roller and shoe 3. Finishing unit with fiber brush - Direct-drive sanding rollers for slip-free power transmission - Maintenance-free and wear-resistant CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of the sanding zones for cooler sanding and longer belt life - Positively guided pneumatically controlled sanding belt oscillation - Effective sanding dust extraction directly at the sanding rollers - Fine-dust extraction at the tension rollers - Integrated brushing and finishing device with large sanding dust extraction - Motorized thickness adjustment via precision lead screws and large-sized linear ball-bearing units on hardened and ground precision shafts with dust and dirt protection - Lower-side material removal adjustment via precision lead screw, with scale ring display (resolution 0.1mm) - Sanding belt tension via pneumatic cylinder with constant tension pressure - Sanding belt change with pneumatic belt relaxation within seconds - Adjustable belt tracking during belt change - Electropneumatic compressed air monitoring - Infeed protection via contact roller for over-thick workpieces - Workpiece transport via calibrated slip- and adhesion-resistant conveyor belts over heavy cast tables with super-fine planed surface and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4-20 m/min - All motors electrically protected - Ergonomically arranged operating elements - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical data: - Sanding belt speed: 22 m/s - Sanding belt length: 1800mm - Sanding belt width: 200mm - Working width: 190mm - Sanding thickness: 2-180mm - Four brake motors for the drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4-20 m/min. - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200 mm each, 0.37 kW - Extraction connection: 2 x 180 mm, 2 x 120 mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with soft disc 2740mm): 2600mm - Length with control panel (with soft disc 3035mm): 2985mm - Width: 880mm - Height: 1910mm - Weight approx. 3300 kg - Operating voltage: 400 Volt, 50 Hz, 3P - CE-compliant ----- Price for the machine specified above: On request! ----- Optional accessories at additional cost: Laedpsvnv Tqofx Afnoc Workpiece air nozzle cleaning - Located at the machine outfeed, top and bottom, pneumatically controlled Sanding belt air jet cleaning, 4-belt Via nozzles arranged directly at the radius of the tension rolls inside the extraction unit, timer-controlled on/off, each 5...

Būklė: paruoštas naudoti (naudotas), Number of sanding units: 2 Sanding width: 190 mm Maximum sanding height: 4–180 mm HESS GLORIA – 2-BELT SINGLE WOOD SANDING MACHINE ----- Manufacturer’s Description: Laodpfx Asv D Rg Djfnoc ---- Compact design constructed according to modern principles. Quiet and vibration-free operation thanks to a torsion-resistant, stable machine housing and special insulation. Safety features compliant with EU Machinery Directive, certified as “dust tested.” Offset sanding units equipped with large tension rollers for effective heat dissipation and stable belt guidance. Sanding units with forced sanding belt oscillation. Two-point sanding dust extraction directly at the sanding drum. Airborne dust extraction at the large tension rollers. Integrated sanding belt air-blow system for extended belt lifespan. Integrated brush and finishing device, adjustable by threaded spindle, with large dust extraction. Motorized adjustment of sanding thickness for the entire upper unit via precision lead screws and linear ball sets on hardened and ground precision shafts, protected against dust and dirt. Electronic digital display for workpiece thickness (resolution 0.1 mm). Contact roller and sanding shoe proportioned for optimal grit load. Hardened and ground sanding rollers. Maintenance-free and wear-free oxide-ceramic sanding shoes (DBGM) with excellent sliding properties, good heat dissipation and high dimensional stability. Sanding belt tensioning via pneumatic cylinders. Belt change by pneumatically actuated belt release. Adjustable belt tracking during belt change. Electro-pneumatic pressure monitoring of compressed air supply with visual fault indicator. Automatic machine stop upon belt breakage or if infeed safety device (with integrated wood thickness control) is triggered. Visual indicator on control panel. Feed device and proven, calibrated, non-slip transport belts on precision-ground tables and spring-mounted pressure rollers. Cardan drive for consistent wood feed. Continuously variable feed speed. Chip removal adjustment via precision lead screw with scale ring (resolution 0.1 mm). Ergonomically arranged controls on the machine front: Top sanding and brush unit, bottom sanding and brush unit, workpiece transport, sanding thickness setting, operation indicators, fault indicators. Integrated control panel with lockable main switch. All motors electrically protected against overload. Technical Data: ----- Sanding belt speed: 24 m/sec Sanding width: 190 mm Sanding thickness: 4–180 mm Shortest workpiece length: 300 mm Feed speed: Infinitely adjustable, 5–25 m/min Sanding belt dimensions: 200 mm wide, 1600 mm long Electrical connection: 400 V, 3/N PE, 50 Hz Sanding units: 2 x 4 kW Feed: 0.75 kW Height adjustment: 0.18 kW Pneumatic connection: R 3/8", 80 NL, 8 bar Extraction air volume: 2 x 2000 – 2500 m³/h, 20–25 m/sec Extraction connection ports: 2 x 160 mm diameter, top of machine housing External dimensions: Length: 1600 mm ...

Būklė: paruoštas naudoti (naudotas), Number of sanding units: 4 pcs. Sanding width: 190 mm Max. sanding height: 180 mm Control: yes Weight: 3,300 kg Dimensions (L/W/H): 2,600 x 920 x 1,890 mm Extraction port diameter: 2x180, 2x120 mm Double-sided sanding machine Löwer DSM 2004 ----- Ledpfxevu Hgbs Afnsac 4-belt sanding machine + disc unit from top/bottom Manufacturer's description: ----- Double-sided four-belt single-piece wood sanding machine for sanding solid wood, such as window profiles, etc. High-stability premium version with innovative features. Designed for high continuous load even with greater material removal. - Sequentially arranged sanding units for pre-sanding, fine sanding, and finishing, each from top and bottom 1st sanding unit: heavy steel roller 2nd sanding unit: rubber-coated roller and shoe 3rd finishing unit: fiber brush (see optional equipment below) - Directly driven sanding rollers for slip-free power transmission - Maintenance-free and wear-free CERMET-coated sanding shoes with excellent thermal conductivity and absolute dimensional stability - External cooling of sanding zones for cooler sanding and longer belt life - Forced pneumatic belt oscillation - Effective dust extraction directly at the sanding rollers - Airborne dust extraction at tension rollers - Integrated brushing and finishing unit with large dust extraction - Motorized sanding thickness adjustment via precision lead screws and large linear ball bearing sets on hardened and ground precision shafts with dust and dirt protection - Removal adjustment below via precision lead screw with scale ring (resolution 0.1mm) - Pneumatic belt tensioning with constant tension pressure - Quick belt change with pneumatic belt release in seconds - Adjustable sanding belt tracking during belt changes - Electropneumatic compressed air monitoring - Infeed protection via contact roller for oversized workpieces - Workpiece transport via calibrated, slip and adhesive-resistant conveyor belts over heavy cast iron tables with finely planed surfaces and spring-loaded pressure rollers with fine adjustment - Cardan shaft drive for smooth and uniform workpiece transport - Feed gear motor with stepless speed control 4–20 m/min - All motors electrically protected - Ergonomically arranged controls - Digital thickness display (resolution 0.1mm) with modern magnetic tape system Technical Data: - Belt speed: 22 m/s - Belt length: 1,800mm - Belt width: 200mm - Working width: 190mm - Sanding thickness: 2–180mm - Four braking motors for drive: 5.5 kW - Feed motor: 1.5 kW - Feed speed: 4–20 m/min - Automatic height adjustment: 0.37 kW - Two brush units with fiber brushes D 120 x 200mm at 0.37 kW each - Extraction ports: 2 x 180mm, 2 x 120mm - Extraction air speed: 20 m/s - Pneumatic connection: 6 bar - Working height: 870mm - Length (with Softdisc 2,740mm): 2,600mm - Length with control panel (with Softdisc 3,035mm): 2,985mm - Width: 880mm - Height: 1,910mm - Approx. weight: 3,300 kg - Operating voltage: 400 V, 50 Hz, 3P - CE compliant Equipped with the following options: - Sanding belt air blow-off 4-belt via nozzles directly at the radii ...

Būklė: nepatikrintas (naudotas), Number of sanding units: 4 pcs Sanding width: 190 mm Max. sanding height: 4–180 mm Weight: 4200 kg Hess Expert 4-Belt Single Wood Sanding Machine Ø Sanding from below/above Ø With 2 offset sanding units each (below and above) Ø Sanding units (below and above) arranged in series according to the planing principle Ø Pre-sanding with coarse grit (calibration) Ø Fine sanding with fine grit (finishing) Ø Central motorized height adjustment of the lower sanding units Ø Central motorized and synchronous height adjustment of the complete upper sanding and brushing units, including the upper feed units Ø Oscillating use of sanding belts (during the sanding process) Ø Absolute power connection via 5.5 kW motors and large-dimensioned drive drums Ø Oxide-ceramic sanding shoe for: - precise surface geometry - no need for readjustment - permanent dimensional accuracy - completely maintenance- and wear-free Basic structure: Stable, heavy-duty welded construction made of thick-walled rectangular profiles with additional, statically calculated reinforcements for optimal vibration damping. Offset sanding units with large-scale belt drive drums for slip-free belt tracking. Dual-point extraction for direct and airborne dust, with sealing brushes and integrated sanding belt air-blast system to extend sanding belt service life. Sanding units made from heavy steel plate design as a basis for vibration-damped, smooth belt running. Absolutely backlash-free guides using ball linear sets made from hardened and ground shafts. Height adjustment of sanding units via hardened and ground special linear guides and preloaded guide carriages. Lasting precision due to dust and dirt protection of the ball linear sets and guide carriages. Large-diameter pre-sanding rollers serve as contact rollers. Contact rollers and sanding shoes are optimally matched to the sanding belt grit load. The large-dimensioned drive drums guarantee full transmission of the sanding motors’ 5.5 kW output to the sanding belt, ensuring slip-free, stable running and optimal heat dissipation. This enables maximum stock removal. Automatic machine stop trigger in the event of belt breakage. Optical indicator at the control panel and machine warning beacon. Finishing sanding shoes are completely maintenance- and wear-free, made from oxide-ceramic for optimal heat dissipation. Sanding belt tension by appropriately dimensioned pressure springs. Sanding belt release for belt changes using a pneumatic system for sensitive, distortion-free installation of new belts. Upper sanding unit and brushing device are centrally motorized, height-adjustable with digital display at the control panel for motorized sanding thickness adjustment. Integrated brushing and finishing device for improved surface finish, built into the main machine. Two vertically-aligned special brush rollers, 150 mm diameter, operating in the same direction as the feed. Separate height adjustment of the brush rollers using precise slide guides for wear compensation. Additional conveyor roller for removing or further transporting the workpiece out of the sanding machine, coupled with the transport belt. Wood guide at entry for hard, double-sided... Lodst Tqy Ejpfx Afnoac

Gamybos metai: 2020, veikimo valandos: 6 000 h, būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Visiškai automatinė popierinių maišelių gamybos mašina pardavimui – WFD-550 Visiškai automatinė popierinių maišelių gamybos mašina, modelis WFD-550, pagaminta 2020 m., parduodama. Įranga geros darbo būklės, gamyboje naudota tik 2 metus. Reguliariai prižiūrėta ir veikia patikimai. Pagrindinės savybės: • Popierinių maišelių su susukamomis rankenėlėmis gamyba • Popierinių maišelių su plokščiomis rankenėlėmis gamyba • Visiškai automatinis padavimo ir formavimo procesas • Stabilus ir efektyvus veikimas Įrenginys tinkamas pramoninei gamybai ir gali būti naudojamas gaminti pirkinių maišelius, pakavimo maišelius bei kitus popieriaus gaminius. Būklė: gera techninė būklė, paruošta eksploatacijai. Lasdpsyuf T Rjfx Afnsc Kaina: derinama Dėl rimtų užklausų kreipkitės el. paštu.

Gamybos metai: 1981, būklė: dilaminuotas dirbtuvėje (naudotas), - Hersteller - MORONI - Modell - SPND 80 - Drahtdurchmesserbereich - 1,8 - 3,5 mm - Nagellänge - 10 - 80 mm - Leistung - 4 kW Ljdohbr T Tepfx Afnoac - Geschwindigkeit - 440 Nägel/Min. Maschine generalüberholt