Kverneland Plūgas pirkti naudotą (780)

Būklė: naudotas, MIG / MAG Pulse Shielded Gas Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Item No.: 4.075 Serial No. Year of manufacture: approx. 2000 Power output 330 Amps = 50% duty cycle 300 Amps = 60% duty cycle 210 Amps = 100% duty cycle Adjustment range stepless Lodpfxeyv H Elj Abrjab Open circuit voltage approx. 50 Volts Open circuit voltage approx. 30 Volts Mains connection 400 Volts, 50 Hz, 32 Amp plug - Digital display for voltage and current - Pulse welding function - Various welding programs selectable Welding processes: MIG/MAG/TIG (program and manual operation) 2-stroke, 4-stroke, 4-stroke special, and spot welding - Welding control with program memory and floppy disk drive for external program storage - Separate 4-roller wire feed unit FRONIUS type VR 152 with connection hose package approx. 1.5 meters - 4-meter hose package BINZEL with central connector - External Fronius water cooling unit type FK 71 - Welding gas pressure regulator - Welding machine equipped with 1.2 mm welding wire Space requirement L x W x H 900 x 660 x 1550 mm Weight approx. 160 kg Good condition - fully functional - ready for demonstration

Būklė: naudotas, Strip Processing Line – Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm – Very well-equipped, with introduction aids Space requirement for complete line (L x W): approx. 7000 x 3000 mm Total weight of the line: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Laedpfxjif Sg Ss Abreb Strip width, nominal: 400 mm Strip width, maximum pass: max. 455 mm Strip thickness at 400 mm width (steel): max. 1.5 mm Strip thickness at 400 mm width (copper): max. 2 mm Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of feed rollers: 2 pcs Feed roller diameter: Ø 80 mm Entry/throughput height: 1500 mm – Straightening rollers hardened, ground, and hard-chromed, with central support – Feed rollers hardened, ground, and hard-chromed, with hydraulic lift – Manual straightening roller adjustment – Introduction aid with hydraulically extendable tongue and hydraulically adjustable deflector roller – Adjustable lateral strip guide – All straightening rollers driven via distributor gearbox with cardan shafts – Both feed rollers driven via gearbox with cardan shafts – Frequency-controlled drive via geared motors – Straightening machine opening stroke 250 mm for system cleaning or feeding thicker material, lifting movement via trapezoidal thread spindle – Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Net weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Coil outside diameter: max. 1600 mm (with loading saddle) Coil outside diameter: max. 2000 mm (without loading saddle) Diameter of coil support disc: Ø 1700 mm Coil inside diameter, expansion range: 460–520 mm Coil width, nominal: max. 630 mm Width of expansion jaws: 750 mm Height of decoiler drum above base plate: 1500 mm – Decoiler drum drive via hydraulic motor and gear – Pneumatic overrun brake on decoiler drum (TWINFLEX) – Hydraulic expansion of decoiler drum, centrally via wedge slide system – Hydraulic pressure arm with hydraulically powered double pivoting roller – Coil loading saddle with 12 t lifting capacity and 300 mm lift – Decoiler in above-floor frame with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Net weight: approx. 5 tons Central Hydraulic Unit (separate) Tank capacity: 350 liters Drive power: 18.5 kW – Drive motor with 2 REXROTH pumps (tandem pump) – Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Net weight: approx. 800 kg Control Cabinet (separate) – All cable connections plug-in via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Net weight: approx. 800 kg

Būklė: naujas, Oil-lubricated Compressor Airpress APS 5.5KW BRAND NEW COMPLETE Screw Compressor APS 7.5 Combi Dry X 10 bar 7.5 HP/5.5 kW 690 l/min 200 l BRAND NEW unit Weight (kg): 310.00 Dimensions L x W x H (cm): 140 x 60 x 143 Duty cycle per work hour (%): 100/0 Motor power (HP/kW): 7.5 HP / 5.5 kW Motor efficiency class: IE2 Motor type: AC Drive: Direct drive 1:1 Dryer: 230 V / 50 Hz / 1 Ph Compressed air receiver: Yes Air receiver capacity (l): 200 Output capacity (l/min): 690 Maximum pressure (bar): 10 Max. effective output (l/min): 690 Max. effective output (m³/h): 41.4 Output capacity (m³/h): 41.4 Sound level dB(A): 63 Sound level dB(A) (4 m): 43 Plug type: EU Refrigerant: Air Main air connection (" thread): 3/4" Female Direct air connection (" thread): - Oil-free: No Number of compression stages: 1 Ljdpfxoq D Dcgs Abrsab Start-up: Y-Δ (Star-Delta) Power supply: 400 V / 50 Hz / 3 Ph Aftercooler: No Variable speed drive (IVR): No Net price: 15,500 PLN Gross price: 19,065 PLN

Būklė: naujas, Gamybos metai: 2026, Continuous / Standard drilling capacity (mm): 20/23 (in E335/ST60) Thread cutting capacity (depending on pitch): M12 Spindle: MK II Spindle speed (stepless): 40–4,000 rpm Drilling depth (mm): 100 Throat depth (mm): 240 Column diameter (mm): 82 Usable work surface (W x L) (mm): 340 x 280 T-slot size (arm), distance (mm), width dimension (mm): Number: 2, 125, 13/26 Speed display: Digital Drilling depth display: Digital Drilling depth stop: Quick-adjust stop ring Feed (mm/rev): Manual Table height adjustment: Rack-and-pinion Motor: Three-phase 400V with frequency inverter (kW): 1.5 Distance spindle/work surface (mm): 160–880 Machine dimensions without packaging (mm): 355 x 705 x 1825 Machine dimensions with packaging (mm): 572 x 936 x 2142 Weight (kg): 195 Standard accessories: Thread-cutting device Control panel with OLED display Robust, high-quality drill head guard with ergonomically angled front LED lighting Quick-adjustable and ergonomic drilling depth stop Infinitely variable speed control via central rotary knob EMERGENCY STOP mushroom button Laodpeir Ir Tefx Abrsb Thermal overload protection Spindle stop Drill guard with electrical interlock Connection cable with CEE plug Optional accessories: Drilling package 3 consisting of: - Machine vice [felix] 2.0 100 mm - Quick-action drill chuck 3–16 mm (accuracy 0.17 mm) - Taper shank MK 2 B18 and reducing sleeve MK 2 to MK 1 €485.00 3-year warranty for single-shift operation Free delivery within Germany only NOT THE RIGHT MACHINE? AS AN OFFICIAL FLOTT SERVICE PARTNER, WE CAN OFFER YOU THE FULL RANGE OF FLOTT PRODUCTS! REQUEST A QUOTATION!

Būklė: naujas, Gamybos metai: 2026, VASG Composites – Insulated Gatehouse / Security Cabin 1.50 x 1.50 m Modern and compact gatehouse / security cabin in high-quality insulated construction, supplied directly from the manufacturer VASG Composites. Technical Data * External dimensions: 1.50 m x 1.50 m x 2.40 m * Internal height: 2.35 m * Design: Monoblock, delivered fully assembled ### Insulation * Wall insulation: 50 mm PUR (polyurethane) * Roof insulation: 50 mm PUR (polyurethane) ### Floor Structure * 14 mm fibre-cement board * PVC floor covering * Available in wood-look or anthracite pattern ### Features * 1 entrance door with partially glazed insulated window * White PVC door frame * 2 insulated double-glazed windows: * 1 fixed window * 1 sliding window / guillotine window (opening) * White PVC window frames ### Colour * External facade and steel frame: * RAL 7016 anthracite grey ### Electrical Installation Lajdey Twb Eepfx Abreb * Surface-mounted electrical installation * 1 power socket * Light switch * Fuse box * Residual current circuit breaker * 32A / 5-pin external power connection (plug) * LED ceiling light Manufacturing location and shipping: Shipped directly from VASG LTD Turkey to your address. Invoice: VASG KFT Hungary ### Additional Equipment * Lifting hooks on the roof for easy loading and relocation ### Optional Equipment * Forklift pockets / forklift sleeves * Folding table inside * Additional guillotine window * Additional fixed window * Roller shutter per window (white) * Door in anthracite * Window frames in anthracite (each) * Roller shutter in anthracite (each) Ideal uses: * Gatehouse cabin * Security cabin * Cashier cabin * Security container * Porter container * Reception container Europe-wide delivery possible. Send us your delivery address for a quote including shipping. VAT not included.

Būklė: naujas, Cantilever rack, single-sided, frame height 2.60 m, 80 cm deep arms, 750 kg per arm, hot-dip galvanized – New equipment: Price ex location incl. loading! Price: €1,480 (net) Transport/packaging costs within Germany (excluding islands): €400 (net)! You can, of course, build longer or shorter rack units by omitting or purchasing additional frames (or by varying the bay spacing); the example with 4 frames is simply the most common racking solution! A hot-dip galvanized cantilever racking system, consisting of: German premium manufacturer, new equipment Description: - Upright, single-sided, 2,600 mm high, hot-dip galvanized - Foot and arm depth 800 mm - Each with 3 height-adjustable cantilever arms - Load capacity with load center at 400 mm - 750 kg per arm / 2,250 kg per upright With 4 uprights per arm level: 4 x 750 kg = 3,000 kg Profiles: Uprights (frames) IPE 140, arms IPE 80 including longitudinal and diagonal bracing Standard bay spacing between uprights is 1.30 m. Lajdponwmwvsfx Abrsb Other available bay spacings from stock: 1 m / 1.25 m / 1.50 m / 1.70 m / 1.90 m! For bay spacings from 1.50 m, a small surcharge applies to the given price! Special dimensions (other bay spacings) also available on request, but incur additional charges and longer delivery times, as they are custom fabricated! Unless you specify otherwise for bay spacing, we deliver the rack with a bay spacing of 1.30 m. In this case, the length for one rack row with 4 uprights (3 bays) is approx. 4 m. Delivered with all bolts and nuts (shipping within Germany via parcel service directly from Würth), without floor anchors. If additional arms per upright are used, please ensure that the maximum specified load capacity of the upright is not exceeded; otherwise, the maximum usable load per arm decreases! Other configurations (upright height, arm lengths, arm types, etc.) are available – please contact us! Available special equipment (at extra cost), see photos attached: - Foot section with impact protection - Foot section with large impact protection - Foot section with tyre guard - Cantilever arm with impact protection - Cantilever arm with plug-in roll-off protection - Clamp-on roll-off protection - Grating decks - Conversion kit for storing pallets Photos are examples of single-sided racks and/or the materials used!

Būklė: labai geros būklės (naudotas), veikimo valandos: 100 h, PERFECT CONDITION, purchased in December 2016 Used for approximately 100 hours Price new: 46,808 EUR The BINDER MKF series environmental simulation chamber is perfectly suited for all cold and heat testing based on recognized temperature and climate test standards in accordance with DIN and IEC norms. High operating comfort and comprehensive standard equipment offer clear advantages for everyday use. Key features Temperature range: -40 °C to 180 °C Humidity range: from 10 to 98% RH Built-in 20 L water reservoir 4 potential-free relay contacts Preheating chamber technology e™ Programmable anti-condensation protection for samples Heated observation window with internal LED lighting Humidity control with capacitive humidity sensor and steam humidification BINDER Multi Management Software APT-COM™ 4 Basic Edition Diagnostic system with optical and acoustic alarm Intuitive controller with touch screen, featuring segment and real-time programming Internal data logger; measurement values in open format, readable via USB 2 access ports with 80 mm silicone plugs, left and right side Independent, adjustable class 2 (DIN 12880) temperature safety device with optical alarm 4 castors, two with brakes 230 V socket on the right side panel Ramp function can be set Built-in line recorder Real-time clock Door heating Alarm notification in case of lack of water in the fresh water tank 1 stainless steel wire shelf Leak protection for inlet and outlet hoses up to 1 m height Stainless steel interior Halogen-free refrigerant R-404A Laedpfxjvldnqe Abreb Cooling provided by compressor condenser unit

Būklė: naudotas, Gamybos metai: 2026, veikimo valandos: 10 h, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 2026-078, darbinis plotis: 1 600 mm, darbinio aukščio: 100 mm, pjovimo plotis (maks.): 1 600 mm, įrankių magazino lizdų skaičius: 2, Used Machine CNC Cutter/Plotter Cutting area X and Y: 1,500 x 1,600 mm (demonstration unit) Multifunctional CAM cutting system with CNC knife technology for 2D cutting of paper, cardboard, fabric, technical textiles, foam, and other flat, semi-flexible or rigid non-metallic materials. Equipment of the used machine: • 1 cutting bridge and 1 multifunctional tool head • Multifunctional tool head capable of holding 2 interchangeable tools • Powerful vacuum blower for material fixation • Standard grey conveyor belt table (conveyor) • Maximum material height: 100 mm Additional tools available (on request): • EOT – Electric Oscillating Tool • POT – Pneumatic Oscillating Tool • PRT – Powered Rotary Tool • UCT – Universal Cutting Tool (drag knife) • KCT – Kiss-Cut Tool • CTT – Creasing Tool • V-Cut – Angle Cutting Tool • Printed mark detection • Camera registration • Punching tool for notches or holes • Milling unit with extraction system Operator-friendly: • Easily replaceable cutting tools, "PLUG & CUT" • Intuitive user interface • Simple blade changing Lajdpfxswgc I Re Abrob • Vacuum zones can be activated at the click of a button Fast return on investment: • Low operating costs with high value-added • Optimum material utilization using nest expert software modules (not included) • High speed • Consistent precision Data: • Short cutting times due to high positioning speed up to 90 m/min • Repeatability: +/- 0.25 mm • Cuts single or multiple layers • Suitable for sheet and roll materials (can be upgraded with appropriate unwinder) • Fast return on investment (Product photo is exemplary) The machine is CE certified.

Būklė: naudotas, Gamybos metai: 2007, Working area: 2780 x 1140 mm (vertical milling), 2500 x 950 mm (horizontal drilling). Travel path X-Y: 2980 x 1271 mm. Z-axis traverse: 200 mm. Clearance height: 180 mm. The main body structure is a monolithic design made of thick-walled steel. It is reinforced throughout the machine bed with welded-in triangular plates, making it extremely stable. The triangular shape with a broad base, used for load-bearing parts, is the key to ensuring sustained precision and stability. The machine layout allows the operator to optimize workflow with a minimal footprint. This main body provides the processing unit with a balanced and secure foundation, featuring outstanding load distribution. The moving aggregate carrier is manufactured as a solid monoblock. It is positioned in the X-direction on ground, prismatic linear guides using recirculating ball carriages. The working unit is also mounted on these ground prismatic guides and ball carriages on the mobile aggregate carrier. Description of aggregates and basic accessories: Drilling unit: Drilling head with 10 + 4 spindles • 6 individually selectable vertical spindles in X • 4 individually selectable vertical spindles in Y • 2 horizontal spindles in X (1+1) • 2 horizontal spindles in Y (1+1) • Speed: 4,000 rpm • Power: 2.2 kW • Pitch: 32 mm • Chuck: M10 with 11 mm seating • Extraction nozzle: D = 160 mm Vertical milling unit (Position 2): • Tool holder HSK 63F • Speed: 1,500 – 24,000 rpm, stepless via inverter • Motor power: 4.4 kW (6 HP) at 12,000 rpm (S1) • CW/CCW rotation • Ceramic bearings • Scope of delivery: 4x tool holders (right) without collet Tool changer: • Side-mounted 7-position tool magazine (TR7), fully enclosed against chip projection • 7 tool slots for HSK 63F tool holders in a row • Max. tool diameter D = 120 mm • Max. weight per tool holder 4.5 kg • Max. total tool weight 20 kg (TR7) • Angular gear units can be accommodated Horizontal milling unit (Position 1): Horizontal unit with two opposed outputs for milling and grooving. • Speed: 9,000 – 18,000 rpm, stepless via inverter • 1 output for collet 3-20 mm (ER32) Lasdpfx Ajx Twdyebrjb • 1 output for saw/collet 3-12 mm (ER20) (For saw D = 120 mm / bore 50 mm) • Motor power: 3 kW (4 HP) • Max. front milling tool diameter: 20 mm • Max. front milling tool length: 110 mm • Max. rear milling tool diameter: 12 mm • Max. rear milling tool length: 80 mm • Max. saw blade diameter: 100 mm • Saw blade bore (ER32): 50 mm • Saw blade arbor diameter (ER20): 12 mm Worktable: The worktable is designed to guarantee the operator maximum freedom of movement. The quick-release vacuum clamping system ensures maximum flexibility with precise positioning and optimal holding of workpieces. • 4 supports, 900 mm, steplessly adjustable manually along X • 8 round vacuum cups, D = 110 mm, steplessly adjustable in Y (2 per support) • 2 stops in X (1 left / 1 right) • 1 stop in Y per support (total 6) • Retractable reference stops are CNC controlled • Supplied: 4 plug-in adapters for suction cups • Pendulum processing as standard (2 working zones) Axis motion: The drive system in X, Y and Z directions uses ground recirculating ball screws of the highest precision class. The ball screw for the X-axis is positioned precisely at the center line...

Būklė: geras (naudotas), Gamybos metai: 2019, Racking hall consisting of cantilever racks and pallet racks, OHRA, footprint approx. 867m² – used – : Price ex location: €99,500 (net), for self-dismantling! Price for dismantling on request. For an additional charge, material for closing off one gable end is also available! Manufacturer: OHRA Year of manufacture: 2019, the sheets 2021 Dimensions of the hall: Width: approx. 17.35 m Length: approx. 50 m Rack height: approx. 6,385 mm Ridge height: approx. 7.10 m After dismantling, one long side of the hall will be open (where it currently adjoins the existing hall). Cantilever racking: 2 rows of 25 double-sided uprights each = total of 50 double-sided cantilever rack uprights Arm length: 1.20 m Arm load: 1,400 kg Load center: 600 mm Load per upright per side: 4,200 kg Axle spacing: 2 m Arms are plug-in Arms with impact protector, provision for unrolling protection Includes pallet beams Base level plus 3 arm levels per side Total depth: 2.70 m (2 x 1.20 m plus 30 cm frame) Aisle width: 3.25 m K-Foot-60-IPE 300-1200-1200-RS-A-RAL K-Roof arm-K60-IPE 120-2750-S6°-PW4-A-RAL Pallet racking: Manufacturer: OHRA System: Pallet racking P3 Year: 2019 Compartment width: 2,900 mm, four bays at 2,400 mm length Compartment load: 2,000 kg Bay load: 6,000 kg Lasdpfx Ajyk H Rijbrsb Top edge first beam (buckling length): 800 mm 1 row 17 uprights 1 row 19 uprights (at two points with pipes) Total uprights: 36 Rack length: approx. 48.10 m Upright depth: 1.10 m Upright width: approx. 10 cm Beam height: approx. 10 cm Beam thickness (support surface): approx. 5.5 cm Beams: IPE Floor plus 3 beam levels Number of beams: approx. 162 at 2.90 m and approx. 24 at 2.40 m length Snow load zone: 1 (0.65 kN/m²) Wind zone: 1 / Terrain category 0,48 kN/m² Availability: immediately Condition: good, slight rusting and faded paint on outer uprights Location: Hockenheim area Drawing available as PDF, parts list, structural calculation. The side loader shown is also available for sale at additional cost (it has received a new battery recently, approx. €9,600 (net)).

Būklė: beveik kaip naujas (parodų įrenginys), Gamybos metai: 2023, Ideal for shredding polystyrene (EPS) or similar materials. Throughput highly dependent on screen and input material: - up to 60 kg/h when processing EPS with a 15 mm screen *the coarser the screen, the higher the throughput Laodpfx Ajh S H T Usbrsb Motor: 9.2 / 11 kW – 400 Volt Robust steel construction, hardened cutting knives, screen with interchangeable inserts, available perforations (8), (10), 15, 22, 26, 30, 40, or 60 mm With electric drive, supplied with star-delta switch, overload protection, and 8 m power cable, plug-ready. Discharge spout: 150 mm, optionally suitable for plastic or grain pipes, blowing distance approx. 12 m. Chassis with 2 running wheels Ø 380 mm, and one swiveling support wheel Ø 125 mm, all wheels with solid rubber tires. Dimensions (LxWxH): approx. 1200 x 900 x 1270/1400 mm Weight: approx. 240 kg Spare part prices and options: 24 hardened knives: €9.90 each (net) 6 bolts: €14.90 each (net) 1 screen: €475 (net) Cover: €290 (net)

Būklė: naujas, Overall length: 7969 mm Belt width: 700 mm Conveyor height: 2500 mm Total power requirement: 0.75 kW Please fill out the form and send it to us via email so we can prepare an offer. Hinged Belt Conveyor – Overview & Features General - Hinged belt conveyors can be manufactured according to requirements and dimensions. - Construction and belt system are robust and durable with regular maintenance. - Most commonly used type of chip conveyor. Areas of Application Transport of: - long, coarse, curled, and crumbled chips - Materials such as transmission steel, tool steel, aluminum alloys, Teflon, Delrin, etc. - Designed for removing chips from the production process. Lsdpfx Abeymf Tnjrsab - Separation of cutting oil/coolant from the chips. Versions - With or without tank for recirculation of cutting oil/coolant to the system. - Four standard chain pitches: 31.75 mm, 38.10 mm, 50.80 mm, 63.50 mm. - Chain pitch selection depends on chip volume to be conveyed. - Width, length, motor, and gearbox are tailored to the hourly conveying capacity. - Coolant recycling is considered in the design. Control - Operated via control panel or CNC control of the machine tool. - Control via plug connection possible. Note: Images are for reference only.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1984, Cutter Grinder Manufacturer: Deckel Model: S0E Year of manufacture: 1984 – overhauled, newly painted Laodpjqctp Sofx Abrsb RAL7035 light grey / RAL7012 basalt grey Machine no.: 84-5532 with warranty Accessories: - Machine stand - Microscope with mount - Integrated dust extraction - Grinding wheel with flange - Dressing tool - Operating manual Including installation of an on/off switch with undervoltage release for implementing restart protection for example, in case of power failure or plug disconnection including fabrication of a mounting adapter plate - Used, as seen -

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 1988, Engraving Tool Grinder Manufacturer: Maschinenfabrik Baden-Baden Model: FSS Ljdpfetqdqgsx Abreab Year of manufacture: 1985 – refurbished, newly painted RAL7012 basalt grey, RAL7035 light grey Machine no.: 2992 Warranty: 12 months (single-shift) from delivery, covering the mechanics overhauled by us. Electrical and electronic components are excluded, as they have only undergone a function test. For machines located outside our North Bavarian sales territory, travel expenses are to be borne by the customer. Accessories: - Grinding wheel with flange - Operating manual Including new electrics On/off switch in new housing with undervoltage release coil, for implementing restart protection (e.g. in the event of a power failure or removal of the mains plug) Used, sold as seen. Technically, the machine corresponds to the state of the art at the time of its year of manufacture.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1986, Engraving Cutter Grinder Make: Deckel Model: S0E Year of manufacture: 1986 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine No.: 86-5751 with warranty Accessories: - Machine stand - Integrated dust extraction - Grinding wheel with flange - Dressing tool - Operating instructions Including installation of an ON/OFF switch with undervoltage release to provide restart protection, e.g. in case of power failure or mains plug removal including production of a mounting adapter plate Used, as seen The machine is technically in accordance with the state of the art at the time of manufacture. Lsdpfeqctniox Abroab

Būklė: naujas, Condition: new Delivery time: approx. 2 - 4 weeks from order Country of origin: Germany Price: €15,095.86 Leasing rate: €289.84 Drilling capacity in structural steel: 30 mm Spindle taper: MK 3 Throat depth: 300 mm Speed range: 0 - 4,000 rpm Motor power: 3 kW Tapping capacity: M30x3.5 Length: 900 mm Width: 610 mm Height: 1,980 mm Weight: 385 kg Feed rates: 0.10 / 0.16 / 0.25 mm/rev Column diameter: 125 mm Spindle-to-table distance: 150 - 700 mm Table size: 590 x 450 mm Quill stroke: 125 mm Continuous/normal drilling capacity: 30/35 (in E335/ST60) Main switch Thread cutting unit Control panel with OLED display Lasdpfx Absynnczorob Digital speed and drilling depth readout Robust, high-quality drill head cover with ergonomically angled front LED lighting Quick-adjust and ergonomic drilling depth stop Infinitely variable speed control via central rotary knob Emergency stop button Thermal overload protection Spindle stop Drill guard with electrical safety interlock Power cable with CEE plug 3-year warranty for single-shift operation Mechanical Z-axis feed including electromagnetic clutch for (3) feed rates Drill point crosshair with push button (on/off) for feed control In thread cutting mode: Right/left rotation via drill point crosshair button or optional foot switch OPTIONAL: Drilling package 5 (vice & quick-action drill chuck) Coolant system LED light with articulated arm

Būklė: naujas, Gamybos metai: 2025, Condition: New Year of manufacture: 2025 Stock number: 030161 Delivery time: Prompt, subject to prior sale Country of origin: Germany Price: €7,350.17 Leasing rate: €141.86 In stock: 1 Drilling capacity in structural steel: 23 mm Spindle taper: MK 2 Throat depth: 260 mm Speeds: 20 – 2000 rpm Motor: 1.5 kW Tapping capacity: M16x1 Ledpfxsxcg Ecs Abroab Length: 430 mm Width: 715 mm Height: 1800 mm Weight: 290 kg Feed: manual mm/rev Column diameter: 110 mm Distance spindle – table: 230 – 850 mm Table size: 420 x 340 mm Quill stroke: 100 mm Continuous/normal drilling capacity: 23/25 (in E335/ST60) Manual feed Digital speed and drilling depth display Main switch Tapping device Control panel with OLED display Sturdy, high-quality drill head cover with ergonomically angled front LED lighting Quick-adjust ergonomic depth stop Stepless speed control via central rotary knob Emergency stop button Thermal overload protection Spindle stop Drill guard with electrical interlock Power cable with CEE plug Art. No. 223.020 R1 (20–2,000 rpm) Art. No. 223.025 R2 (30–3,000 rpm) OPTIONS: Drill package 3 (vice & quick-change drill chuck) Coolant device LED lighting with articulated arm

Būklė: naujas, Condition: New Delivery time: approx. 2 – 4 weeks from order Country of origin: Germany Price: €5,309.85 Leasing rate: €102.48 Drilling capacity in structural steel: 18 mm Spindle taper: MK 2 Throat depth: 240 mm Speed range: 30 – 3,000 rpm Motor power: 0.75 kW Tapping capacity: M12 (dependent on thread pitch) Length: 705 mm Width: 355 mm Height: 1,825 mm Weight: 195 kg Feed: manual mm/rev Column diameter: 82 mm Distance spindle – table: 180 – 870 mm Table size: 340 x 280 mm Quill stroke: 100 mm Continuous / normal drilling capacity: 18/20 mm (in E335/ST60) Thread cutting device Control panel with OLED display Digital speed and drilling depth display Robust, high-quality drill head cover with ergonomically inclined front LED lighting Quickly adjustable and ergonomic drilling depth stop Manual feed Lasdeynmz Aspfx Abrjb Infinitely variable speed control via central rotary knob Emergency stop push button Thermal overload protection Spindle stop Drilling guard with electrical interlock Connection cable with Schuko plug 3-year warranty for single-shift operation OPTIONS: Drilling package 3 (vice & quick-change drill chuck) Coolant system LED lighting with articulated arm

Būklė: labai geros būklės (naudotas), Gamybos metai: 2021, Funkcionalumas: visiškai funkcionalus, bakelio talpa: 700 l, A small brewery is being offered as a complete package – perfect for getting started! This setup has been in use in this configuration since 2022 and is in excellent condition. Plug & play – no complicated installations required. Simply connect and start brewing! Brewiks 500 two-vessel brewhouse * Electrically heated with 36 kW – can also be operated at 18 kW * 760-liter brew kettle, lauter tun with 840-liter capacity * For grist charges up to 190 kg and 640 L of cold wort * Brewing control via touch interface with recipe management, automatic mashing program, timer function, and manual mode * Sparge water heated with built-in heat exchanger * Wort cooling system also integrated! * With steam condenser * Manufacturer offers an extension for double batches – increase your efficiency! * Model with removable side arm – can be brought in upright through relatively narrow doorways Speidel CCTs (Cylindroconical fermentation tanks) * 2.5 bar test pressure * 3 units at 625 L * 1 unit at 240 L * Double-jacket cooled * Complete accessories included, plus extra clear-outlet valves Kreyer Chilly 35 LT refrigeration unit Sommer Piccolo malt mill Lajdsy Shzgjpfx Abreb Includes chassis and bagging spout Bottle Guard counter pressure filler 2-head Includes rinser Ercole electric crown capper Godex label printer + rewinder Manual Flexlabeller applicator Various other accessories and small equipment, KEGs including filling technology, etc. available upon request.

Būklė: naudotas, Gamybos metai: 2023, veikimo valandos: 120 h, Virtually as new Haas TRT210 two-axis rotary tilting table with only approx. 120 operating hours. The table was exclusively used on a Haas VF-4 (see separate listing) and is in visually and technically flawless condition. The TRT210 is Haas’ compact 5-axis solution for medium-sized VMCs and fits space-savingly at one end of the machine table—leaving the rest of the clamping surface free for vises or other fixtures. Plug-and-play integration with any Haas milling machine equipped with 4th/5th axis drives and corresponding NGC control software. The scope of delivery includes, in addition to the rotary tilting table itself, the matching toe clamp kit for direct mounting on the machine table as well as a Renishaw extension block for the side mounting of the wireless receiver (OMI/OMP)—ensuring reliable signal transmission to the probe across the entire A-axis swing range. Available from approx. week 32. Inspection possible by appointment. Shipping can be arranged. Technical specifications: - Plate diameter: 230 mm (9.10") - Max. interference circle: 368 mm (14.5") - Max. workpiece weight on plate: up to approx. 90 kg - Hole pattern: 2× 6-hole pattern A-axis (tilting): - Swing range: ±120° - Max. speed: 80°/s - Max. torque: approx. 407 Nm (300 ft-lb) - Holding torque at 6.9 bar: approx. 540 Nm - Accuracy: ±25 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° B-axis (rotary): - Rotation range: 360°/infinite - Max. speed: 100°/s - Max. torque: approx. 285 Nm (210 ft-lb) - Holding torque at 6.9 bar: approx. 270 Nm - Maximum runout: 0.013 mm (0.0005") - Accuracy: ±15 arc-sec - Repeatability: 10 arc-sec - Resolution: 0.001° General: - Supply voltage: 115 VAC, approx. 15 A - Maximum compressed air: approx. 10 bar (150 psi) - Weight: approx. 220 kg Scope of delivery: - Complete Haas TRT210 rotary tilting table - Original Haas servo connection cables for A and B axes Lsdpfx Ajy Tp Hgobroab - Toe clamp kit (mounting on machine table) - Renishaw extension block for lateral receiver mounting - Original documentation

Būklė: geras (naudotas), Gamybos metai: 2020, veikimo valandos: 1 730 h, Funkcionalumas: visiškai funkcionalus, bendras svoris: 580 kg, bendras ilgis: 1 335 mm, bendras plotis: 750 mm, bendras aukštis: 1 880 mm, slėgis (maks.): 11 juosta, aplinkos temperatūra (min.): 3 °C, aplinkos temperatūra (maks.): 45 °C, triukšmo lygis: 66 dB, apsaugos tipas (IP kodas): IP55, Įranga: Tipinė plokštelė prieinama, dokumentacija / vadovas, šaldymo sausintuvas, Kaeser Aircenter SK22 Screw Compressor (2020) Manufacturer: Kaeser Model: Aircenter SK22 Year of manufacture: 2020 Condition: Very good, used Operating hours: 6,000 h Load hours: 1,730 h Next service in: 2,589 h Technical Data Pressure: 11 bar Effective free air delivery: 1.67 m³/min Drive motor rated power: 11 kW Drive motor protection rating: IP 55 Lajdey Tkhrjpfx Abrob Electrical supply: 400 V / 3 Ph / 50 Hz Dimensions (W x D x H): 750 x 1335 x 1880 mm Weight: 580 kg Compressed air receiver: 350 l Compressed air connection: G 1 Sound pressure level: 66 dB(A) Refrigeration dryer Power consumption: 0.49 kW Pressure dew point: 3°C Pressure drop: 0.06 bar Refrigerant: R 513a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment per EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5 m power supply cable with 32A plug

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2021, veikimo valandos: 620 h, Funkcionalumas: visiškai funkcionalus, Kaeser Aircenter SM13-11 Screw Compressor (2021) Manufacturer: Kaeser Model: Aircenter SM13-11 Lasdpfx Ajy Tkg Iobrob Year of manufacture: 2021 Condition: Very good, used Operating hours: 1,356 h Load hours: 606 h Next service due in: 2,825 h Technical specifications: - Pressure: 11 bar - Effective free air delivery: 1.08 m³/min - Rated motor power: 7.5 kW - Motor protection class: IP 54 - Electrical supply: 400 V / 3 Ph / 50 Hz - Dimensions (W x D x H): 630 x 1200 x 1716 mm - Weight: 400 kg - Compressed air receiver: 270 l - Compressed air connection: G 3/4 - Sound pressure level: 64 dB(A) Integrated Refrigeration Dryer: - Power consumption: 0.26 kW - Pressure dew point: 3 °C - Pressure drop: 0.2 bar - Refrigerant: R 134a Energy-saving control: Yes Electronic condensate drain: Eco-Drain Electrical equipment according to EN 60204-1: Yes Scope of delivery: – Complete original documentation – RFID cards (2x) – 5m supply cable with 32A plug

Būklė: naujas, Condition: new Delivery time: approx. 2-4 weeks from order Country of origin: Germany Price: €1,896.69 Grinding wheel dimensions: 200 x 32 x 32 mm Motor: 1 kW Speed: 2550 rpm Connection for extraction: Ø 42 mm Lsdpfx Abjy Ig N Isreab Length: 270 mm Width: 470 mm Height: 1050 mm Transport dimensions: 600 x 800 x 1350 mm Weight: 60 kg Low-vibration, maintenance-free motor Side-enclosed safety hoods Stable, adjustable workpiece rests High safety standard thanks to adjustable spark guards Suitable for grinding, deburring, and sharpening of all types of tools, metal profiles, etc. Motor protection switch and undervoltage release Double-sided spark/eye protection Power cable with 16 A CEE plug Includes one coarse and one fine grinding wheel 12 months warranty for single-shift operation ID 317.774 – with machine stand, emergency stop button, and brake OPTION (price on request): Foot pedal as emergency stop ALTERNATIVE VERSIONS: ID 317.762 – bench model ID 317.777 – with MA400D integrated dust extraction, machine stand, emergency stop button, and brake.

Būklė: naujas, Cutting capacity at 90°: round 240 mm Cutting capacity at 90°: square 240 x 240 mm Cutting capacity at 90°: flat 165 x 210 mm Cutting capacity at 45° right: round 195 mm Laedpjy H N Nnsfx Abreb Cutting capacity at 45° right: square 185 x 185 mm Cutting capacity at 45° right: flat 130 x 190 mm Cutting capacity at 60°: round 120 mm Cutting capacity at 60°: square 85 x 85 mm Cutting capacity at 60°: flat 85 x 120 mm Cutting capacity at 45° left: round 170 mm Cutting capacity at 45° left: square 145 x 145 mm Cutting capacity at 45° left: flat 60 x 195 mm Cutting speed: 36 + 72 m/min Saw blade dimensions: 2725 x 27 x 0.9 mm Vice opening: 315 mm Working height: 900 mm Motor power: 1.2 kW Weight: 330 kg The ZIMMER Z252/DGH is a hydraulic semi-automatic band saw designed for metal fabrication. This double mitre saw can swivel up to 60° to the left and 45° to the right. The machine features a rapid-approach button (for fast-feed positioning to the material). Equipment: - Infinitely adjustable feed via a hydraulic throttle valve - Tool-free saw blade change with quick-release fasteners - Hydraulic unit, coolant pump, control panel, base frame, saw blade, and 400 V / 16 A plug included.

Būklė: naujas, ALZMETALL Column Drilling Machine Alzstar 23 S Manufacturer: Alzmetall Model: Alzstar 23 S Condition: NEW Drilling capacity in steel E335 (St 60): 23 mm Thread cutting Steel E335 (St 60): M 14 Lodjy S Avlopfx Abrjab Cast iron EN-GJL-200 (GG20): M 16 Short taper spindle MK 2 Quill stroke: 100 mm Throat depth: 250 mm Column diameter: 90 mm Machine table, usable surface: 370 x 300 mm T-slots, number x width x spacing: 2 x 14 x 160 mm Distance spindle-table min./max.: 140/670 mm Feed: manual Machine height without options: approx. 1770 mm Net weight: approx. 175 kg Drive: stepless Motor speed: 750 / 1500 rpm Power: 0.6 / 0.95 kW Spindle speed range: 225–4300 rpm Standard equipment: Mushroom-head emergency stop button (latching) Reversing switch for clockwise and counterclockwise rotation Motor protection switch Infinitely variable speed adjustment Digital speed display Protection class IP 54 Plug (pre-installed, cable length 2 m) Spindle guard with electrical interlock Paint finish: DD textured light grey RAL 7035, anthracite RAL 7016