Kellenberger 1500U Bema Aktuell pirkti naudotą (232)

Būklė: naudotas, Gamybos metai: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm The machine was overhauled according to the Kellenberger inspection protocol and newly repainted. The prone-to-failure Güttinger control system was replaced with the modern BEMA X control system. This means the machine also received a completely new electrical system as part of this upgrade. Machine equipped with a reinforced workpiece spindle head for chuck grinding of heavy workpieces. Currently, the machine does not meet the fundamental safety and protection requirements specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). Kdedpsvq R Uzsfx Af Hsl Raising the required minimum safety standard must be determined by means of a risk assessment according to BetrSichV.

Būklė: naudotas, Gamybos metai: 1982, Grinding diameter 630 mm Grinding length 600 mm Centre height 320 mm Machine equipped with reinforced workpiece headstock for unsupported grinding of heavy workpieces. The machine will undergo a major service/partial overhaul including a geometry inspection report Kjdpev Dxxzofx Af Hodl in accordance with Kellenberger new machine standards. The machine tool currently does not meet the essential safety and protection requirements as specified in the German Ordinance on Industrial Safety and Health (BetrSichV 2015). The necessary minimum safety objectives must be determined in the course of a risk assessment in accordance with BetrSichV.

Būklė: naudotas, Gamybos metai: 2010, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Control unit: Fanuc 310is Completely mechanically overhauled. Includes grinding process setup and tooling for one part. Kdodpfxjvdk N Eo Af Hsl Original photo of the machine from EMO 2010. CNC control: GE Fanuc 310is Hand panel for CNC control: GE Fanuc With Wenger loader Rotary part with automatic 1° indexing Grinding head UR 1-2-3 Grinding wheel configuration left: 500 x 80 mm Grinding wheel configuration right: 400 x 63 mm Operating unit for a high-frequency internal grinding spindle MFV / MFZ High-frequency internal grinding spindle MFN 1090 Coolant supply through the workpiece spindle Dressing device on the upper table Swiveling holder for PCD diamond plates Base module for KEL-TOUCH contact sensor and KEL-BALANCE balancing units KEL-TOUCH contact sensor for universal grinding head variants R / RS / UR / URS KEL-TOUCH at the workpiece spindle headstock for internal and external grinding Preparation for measuring control systems Movomatic ESZ 400 or Marposs P7 ME Preparation for external filtration unit Coolant cut-off for table devices Fully enclosed emulsion Mist extraction unit for emulsion Maintenance unit for pneumatic auxiliary functions Preparation for KEL-VITA gantry loader KEL-POS, MOVOMATIC: probe C25 Hydraulic preinstallation for Arobo steady rest

Būklė: naudotas, Gamybos metai: 1995, Šlifavimo skersmuo: 350 mm Kdsdpsyatx Sjfx Af Hjl Šlifavimo ilgis: 1000 mm Viršūnės aukštis: 175 mm Iš dalies renovuotas įrenginys su matavimo protokolu pagal naujos staklės tolerancijas NAUJA Eckelmann ENC valdymo sistema su BEMA šlifavimo programine įranga Skaitmeniniu būdu valdoma B ašis Vidinio šlifavimo įrenginys, skersmuo 80 mm Kairėje šlifavimo diskas, skersmuo 400 mm Dešinėje šlifavimo diskas, skersmuo 300 mm Vidinio šlifavimo velenas HJN 828 Hidraulinis grąžtas Mikroreguliavimas KEL SET matavimo sistema

Būklė: naudotas, Grinding diameter: 250 mm Grinding length: 600 mm Centre height: 125 mm Grinding wheel diameter: 500 mm Grinding wheel width: 80 (100) mm Bore: 203.2 mm Workpiece spindle taper: MT5 Workpiece spindle speed: 20–400 rpm Workpiece headstock swivels: +/- 360° Grinding headstock swivels: +/- 0° Plunge feed per stroke: 0–9.99 mm/Ø Continuous feed: 0–9.99 mm/Ø Table swivels: +/- 10° Table longitudinal movement: 700 mm Table speed: 0.02–6 m/min Workpiece weight between centres: 130 kg Maximum workpiece weight – between centres: 130 kg including clamping Cross-slide travel: 270 mm Tailstock quill taper: MT 3 Quill travel: 30 mm Total power requirement: 5.5–7.5 kW Machine weight approx.: 2.7 t Kdsdsd Ih Ehepfx Af Hol As the world’s leading company in Kellenberger overhauling/retrofit, we not only deliver machines in as-new quality and with warranty, but also offer comprehensive service for your machines. Overhauled to Kellenberger guidelines, including brand new, modern and future-proof control system. Photo shows a previously delivered machine. – Touch-panel operation is extremely easy. – The control panel’s symbols are almost identical to the original system, eliminating the need for extensive retraining. – Diagnostic function with PLC messages and digital I/O display. – Dressing function expandable or modifiable to customer requirements. – Orientated spindle stop for the workpiece spindle available upon request. – New maximum infeed amount of 40 mm, further increases upon request. – Digital readout in 2 axes. X-axis resolution: 0.5 μm. Options: – Rotary encoder with digital display on workpiece headstock – Rotary encoder with digital display on grinding headstock (no height adjustment possible with spindle) – New stable internal grinding device for diameters 80 mm or 100 mm, with height adjustment – Increase centre height up to max. 225 mm – Variable speed control for grinding spindle Included: – New DGS paper band filter – Operation tools – Clamping tube for chuck Further accessories on request. The machine features an electronically controlled infeed system on the X-axis with stepper motor drive. Hydraulic table stroke and rapid traverse. Versatile applications in production for external and internal cylindrical grinding, or for external, face, and internal grinding in a single setup of workpieces. Optional features: – Semi-automatic dressing cycles for external and internal grinding – Automatic dressing compensation – Measurement control system The machine tool currently does not comply with the basic safety and protection requirements as stipulated in BetrSichV 2015. A hazard assessment in accordance with BetrSichV must be carried out to determine the required minimum level of protection.

Būklė: naudotas, Gamybos metai: 2006, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Machine weight approx. 3.5 t Machine fully overhauled in BEMA style with 12 months warranty Mechanically and visually as new Photo shows a freshly completed machine with some different options. Fanuc 21i control - Grinding head UR 1-2-3 for external/internal/planar grinding - B-axis automatic 1° Hirth toothing - Active longitudinal positioning KEL-POS Movomatic - Semi-automatic balancing device KEL-BALANCE - Left grinding wheel mount 400mm diameter - Right grinding wheel mount 300mm diameter - Internal grinding attachment with belt drive - Tailstock with micrometric adjustment - Fine adjustment of upper table - Paper band filter SBP4 240l Kedet Ii Nbepfx Af Hjdl

Būklė: naudotas, Grinding diameter 350 mm Grinding length 1500 mm Centre height 175 mm Left wheel 600 mm Grinding spindle head fixed, non-rotatable. Equipped with new FAGOR control system featuring BEMA cylindrical grinding interface. Ksdpot Ii Rfofx Af Hsdl With new service-friendly enclosure. Completely overhauled according to Kellenberger measurement protocol.

Būklė: naudotas, Gamybos metai: 1995, Šlifavimo skersmuo: 350 mm Šlifavimo ilgis: 1000 mm Centų aukštis: 175 mm 2013 m. kapitaliai suremontuota Sustiprinta ruošinio špindelio galva Nuolat reguliuojama B ašis Griebtuvas Be nuotraukoje matomo pradžios ir lunetos Valdymas: Kelco 90 Kedpfx Ajxyadasf Hedl Mašiną galima apžiūrėti pas klientą prijungtą prie elektros iki 2026 m. sausio mėn. imtinai.

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, For sale is a universal cylindrical grinding machine by Strausser-Kellenberger. Technical data: Manufacturer: Strausak AG Maschinenfabrik (Switzerland) Model: 57U Voltage: 380V / 50 Hz Machinery Purchase / Sales BUYING / SELLING OF PRODUCTION & METALWORKING MACHINES AND MORE. Kjdpov E Ivfefx Af Hodl Do you need a high-quality yet affordable metalworking machine for your production? Or are you looking to sell yours? For further information or contact options, please visit our website.

Gamybos metai: 2016, būklė: paruoštas naudoti (naudotas), Pressing force: 50 t, opening dimensions: 870 x 1500 mm, bale dimensions: 1500 x 1100 x 1100 mm, bale weight: 450 kg, length: 1524 mm, width: 2100 mm, height: 3217 mm, weight: 1.93 t, operating hours: 18 h. Ksdpfoirakgex Af Hjdl

Būklė: naudotas, TECHNICAL DATA - Distance between centers: 1000 mm - Center height: 175 mm - Table orientation: 9° - Universal wheelhead spindle stock - Left grinding wheel dimensions: 400 x 50 x 127 mm - Motor power: 3 kW - Spindle speed: 1500 / 1700 / 2200 rpm - Wheelhead spindle orientation: 270° (3 x 90°) - Internal spindle bore: 90 mm - Workpiece spindle stock orientation: 180° - Spindle speed: 20 - 400 rpm - Internal spindle taper: Morse 5 - Motor power: 0.9 kW - Tailstock internal taper: Morse 4 - Tailstock quill stroke: 30 mm - Dimensions: 2860 x 1680 x 1670 mm - Machine weight: 2500 kg ACCESSORIES - Automatic cycle (roughing, finishing, and return) - Counter-center - Coolant tank with paper filter - 1 internal grinding spindle - 1 diamond holder - 2 two-finger steady rests - 1 three-finger steady rest - 1 set of drivers Kdedpjxy S A Ijfx Af Hsl - Various grinding wheel holders

Būklė: naudotas, Gamybos metai: 1995, Vamzdžio skersmuo: 45 mm Sienelės storis: 2 mm Minimalus lenkimo spindulys: . mm Mašinos svoris apie 1,7 t Užimama vieta apie 5x0,85x1,5 m sn 1765 Ksdpoyutr Ujfx Af Hodl Vamzdžio ilgis iki 4100 mm Techniniai duomenys pateikti gamintojo arba operatoriaus ir nėra mums įpareigojantys. Pasiliekame teisę pertraukti pardavimą; galioja tik mūsų verslo ir pardavimo sąlygos. Apie mus: daugiau nei 400 nuosavų mašinų sandėlyje daugiau nei 15.000 m² sandėlio ploto, krano keliamoji galia 70 t daugiau nei 10.000 priedų jūsų dirbtuvėms Jei norite parduoti mašinas, gamybos linijas ar įmonę, susisiekite su mumis. Daugiau pasiūlymų rasite mūsų internetiniame puslapyje. Peržiūra galima suderinus laiką. Laukiame jūsų apsilankymo. Jūsų Markus Hirsch komanda

Būklė: naudotas, centro aukštis alkūniniame velene: 125 mm, ruošinio skersmuo tarp centrų: 1 300 mm, pasukimo diapazonas: 9 °, Cilindrinio šlifavimo staklės Kellenberger 51 HU Centro aukštis: 125 mm Atstumas tarp centrų: 1200 mm Darbinio stalo paviršius: 1590 x 140 mm Paviršiaus šlifavimas: 1300 x 200 mm Stalo išilginis judesys, rankinis ir automatinis: 1300 mm Stalo pasukimas: 9° Ruotrio galvutė: Greičiai, 5 žingsniai: 50–400 aps./min. Pasukimas: 360° Vidaus kūgis: MT5 Uodega: Vidaus kūgis: MT3 Rankovės eiga: 18 mm Šlifavimo veleno galvutė: Skersinis poslinkis: 320 mm Pasukimas: 360° Veleno greičiai, 3 žingsniai: 2000, 2400 ir 3650 aps./min. Šlifavimo diskas: 300 x 25 x 127 mm Ksdpoxpif Eofx Af Hedl Variklis: 3,5 AG Vidinė šlifavimo priedas: Veleno greitis: 14 000 aps./min. Staklių svoris: 1950 kg Prašome teirautis kainos su transportu!

Būklė: naudotas, 3 flanšai, skirti 600 U tipui – parduodami atskirai arba komplekte Kdodeyqyawspfx Af Hsl

Būklė: paruoštas naudoti (naudotas), An older precision cylindrical grinding machine from Kellenberger, including accessories, is available. Centre distance: 200 mm, centre height: 125 mm, maximum workpiece weight: 3 kg, maximum workpiece diameter: 245 mm, maximum workpiece length: 130 mm. An on-site inspection is possible. Kdedpfx Asw Edpgjf Hjl

Būklė: paruoštas naudoti (naudotas), Siūloma Kellenberger išorinė apvalaus šlifavimo staklė. Atstumas tarp centrų: 1000 mm, centrų aukštis: 175 mm, didžiausias ruošinio skersmuo: 250 mm, X/Z eiga: 1000 mm/220 mm, šlifavimo disko skersmuo: 500 mm, apsukos: 1530 aps./min. Staklių matmenys (X/Y/Z): apie 3000 mm/1850 mm/1750 mm, svoris: apie 3150 kg. Galima apžiūra vietoje. Kodpfoxxzi Ijx Af Hsdl

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1995, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 630005, centro aukštis: 305 mm, plotis centre: 1 000 mm, X ašies eiga: 350 mm, Z ašies eigos atstumas: 1 160 mm, valdiklio modelis: KELCO 90, TECHNICAL DETAILS Centre Height: 225 mm / 305 mm Centre Distance: 1,000 mm Z-Axis Travel: 1,160 mm X-Axis Travel: 350 mm Max. Workpiece Weight: 200 kg Workpiece Diameter: 449 mm Left Grinding Wheel Diameter: 500 mm Left Grinding Wheel Width: 80 mm Left Grinding Wheel Bore: 203 mm Right Grinding Wheel Diameter: 400 mm Right Grinding Wheel Width: 40 mm Right Grinding Wheel Bore: 127 mm B-Axis Swivel Range: +30° / -190° Max. Grinding Wheel Speed: 1,720 rpm Peripheral Speed: 45 m/s Workpiece Spindle Speeds From: 5 rpm Workpiece Spindle Speeds Up To: 500 rpm Spindle Taper: MK 5 Tailstock Quill Mount: 4 Morse Taper Tailstock Quill Travel: 50 mm X-Axis Feed: 8 m/min Z-Axis Feed: 16 m/min Max. Table Swivel: -1° / +11° MACHINE DETAILS Control: KELCO 90 Total Power Requirement: 25 kW Connection: 50 Hz, 3x 380 Volt Kdjdpfjyhnrvsx Af Hsl Dimensions & Weight Machine Dimensions (L x W x H): 2,850 x 2,200 x 2,100 mm Control Dimensions (L x W x H): 550 x 450 x 900 mm Machine Weight: approx. 6,000 kg EQUIPMENT - 80 mm Raise / Height Extension - Coolant System - Automatic Tool Measurement KELSET - Dressing Device - Internal Grinding Attachment (without spindle) - Set of Flanges - Set of Grinding Wheels - Balancing Arbor - Lamp - Magnetic Chuck Diameter (2x): 300 mm / 500 mm - Electronic Hand Control Panel

Būklė: labai geros būklės (naudotas), Kellenberger 1000U apvali šlifavimo staklės su daug priedų parduodamos už patrauklią kainą. Šios staklės yra labai geros būklės ir visiškai veikiančios. 2019 metais pirktos po kapitalinio remonto. Kaina ženkliai sumažinta! Kdedpfxowkt Euj Af Hsl

Gamybos metai: 1979, būklė: visiškai atnaujintas (naudotas), Funkcionalumas: visiškai funkcionalus, TECHNICAL DETAILS Centre height: 125 mm, plus heights of 50 mm Distance between centres: 1,000 mm Grinding wheel: • Diameter: 400 mm • Width: 50 mm • Bore: 127.0 mm Swivel angle: 270° Kdedpfx Aek H Hp Nof Hel Workpiece spindle head speed: 20 - 400 rpm Spindle taper: 5 MT Tailstock taper: 3 MT Table swivel angle: 8° Table feed rate: stepless up to 6.0 m/min Internal grinding spindle with 60,000 rpm External grinding wheel motor: 4.0 kW Workpiece spindle motor: 1.5 kW Machine weight: 3,100 kg Overall machine dimensions: 2,860 × 1,680 × 1,670 mm (L × W × H) EQUIPMENT & SCOPE OF DELIVERY • Machine fully retrofitted • New control cabinet & new wiring diagram • New motor & frequency inverter for workhead • 2-axis DRO • Coolant tank with paper filtration • Geometry manufactured according to Kellenberger protocol • Internal grinding spindle • Extensive accessories Please refer to the attached inspection report for further machine details.

Gamybos metai: 2015, būklė: labai geros būklės (naudotas), On behalf of a customer from Switzerland, I am offering this machine for sale. The machine is in excellent condition with only 5,200 operating hours. Previously used for prototyping, currently in operational condition. Kjdogtingopfx Af Hedl Features include: - UR grinding head - T1 500 x 80; T2 400 x 63 - 1 high-frequency internal spindle MFM 1224/42 - 1 high-frequency internal spindle MFM 1290 - Semi-automatic balancing system - KEL-TOUCH at the workpiece spindle head for internal and external grinding - KELSET grinding wheel measurement - KELPOS longitudinal positioning - Heidenhain CNC GrindPlus 640 - CNC B-axis, hydrostatic - CNC C-axis for polygon and thread grinding - KELSOFT NCG for non-circular grinding - KELTHREAD for thread grinding - KELREMOTE for remote diagnostics - Prepared for measuring controls - Streuli 480 l paper band filter - Extraction system Short-term availability ex Switzerland.

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Parduodama naudota Kellenberger apvalaus šlifavimo staklė labai geros būklės. Kaina ženkliai sumažinta !!!!! Ksdpfx Afew Dzbdj Hsdl

Būklė: naudotas, Funkcionalumas: visiškai funkcionalus, Kellenberger apvalių paviršių šlifavimo staklės labai geros būklės. Parduodamos už palankią kainą. Kaina ženkliai sumažinta !!!!! Kdodpfx Afjw Dy Rqj Hjl

Būklė: labai geros būklės (naudotas), with internal grinding device Centre height 125 mm Centre width 600 mm Kedpfoiu E Trjx Af Hjdl Grinding wheel 400 x 40 x 127 mm Various accessories MARCELS MASCHINEN AG

Būklė: visiškai atnaujintas (naudotas), Machine fully overhauled With digital display Centre height: 175 mm Centre distance: 1000 mm Grinding wheel: 400 x 50 x 127 mm + 225 x 20 x 76.2 mm Grinding wheel speed: 1,500–2,200 rpm With internal grinding device Kedpfx Afswhk Uue Hedl Various accessories MARCELS MASCHINEN AG

Būklė: naudotas, Apvali šlifavimo staklės KELLENBERGER URF 320 Ksdpfx Afoyn R I To Hedl