Centrifuginis Horizontalus Filtras (Zhf) pirkti naudotą (8 255)

Būklė: naudotas, Centrifuginis siurblys, siurblys, KSB Etabloc-GN 50-200/1852, naudota įranga Fodpfsy Nnnbsx Ahrsgd Gamintojas: KSB Tipas: KSB Etabloc-GN 50-200/1852 Metai: 2003 Bendri matmenys: Plotis: 810 mm Gylis: 350 mm Aukštis: 400 mm Svoris: 130 kg Elektros duomenys: 400 V; 18,5 kW; 32,5 A Srautas: 72 m³/h Pakėlimo aukštis: 51 metras

Būklė: naudotas, Gamintojas: Grundfos -tipas: LP 80 125/124 B-F-A-RUUV -modelis: 48/62941-P1-0250 -tūrio srautas: 50 m³/h -kėlimo aukštis: 15,5 m -darbinis slėgis: 16 bar Fsdpfxey R Edce Ahrjgd -darbinė temperatūra: 80°C -jungties dydis: DN80

Būklė: naudotas, Cinturón filtro, filtro de presión, filtro de emulsión, filtro de lodos, filtro de lubricante, filtro de emulsión, máquina usada Fabricante: Faudi Fgsdpsy Uc Uajfx Ahrsd Dimensiones: 2460 x 1660 x 1270 mm Tamaño de banda: 2200 x 1270 mm Superficie activa de filtrado: 1400 x 1200 mm Capacidad: 1200 l/min El Klappbandfilter se utiliza para la limpieza de fluidos refrigerantes y lubricantes contaminados en el sector del mecanizado de metales, así como para el tratamiento de diversos residuos de lodos generados durante el desbaste, especialmente aluminio, o para la gestión de lodos abrasivos procedentes de rectificado. Al limpiar los fluidos refrigerantes y lubricantes, así como los lodos de rectificado, estos pueden ser reutilizados en el proceso durante períodos más prolongados, contribuyendo significativamente a la protección medioambiental. Otros beneficios adicionales incluyen la disipación de calor en la zona de mecanizado y la optimización de la calidad superficial de las piezas trabajadas. El Klappbandfilter es versátil y también puede emplearse de forma independiente. Su diseño modular permite que se adapte de manera óptima a diferentes condiciones. La ingeniería de FAUDI permite la formación y extracción de tortas de filtración de hasta 15 cm de espesor. Con tortas de filtración especialmente gruesas, se incrementa aún más la eficiencia de separación del filtro. Se pueden realizar superficies de filtrado de 1, 1,5 y 2,5 m² por filtro. Grado de filtración: Hasta 10 µm Medios/Fluidos: Aceites y emulsiones de mecanizado Auxiliares de filtración: Opcional con o sin auxiliares de filtración

Būklė: naudotas, Centrifuginis ventiliatorius, 18,5 kW, naudota įranga Bendri matmenys: 1680 × 1650 × 1260 mm Svoris: 457 kg Elektros duomenys: 400 V; 18,5 kW; 34 A Apskaičiuotas oro srautas: 11 800 m³/h Fgsdpfx Aeyzypnjhrod Apskaičiuotas slėgis: ~4500 Pa, 3,96 kg/s

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2005, veikimo valandos: 44 673 h, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 000 mm, Y ašies eiga: 900 mm, Z ašies eigos atstumas: 900 mm, valdiklio modelis: OSP-E100M, veleno greitis (maks.): 12 000 aps./min, įrankių magazino lizdų skaičius: 320, Nėra minimalios kainos – garantuotas pardavimas už didžiausią pasiūlytą kainą! Pateikus pasiūlymą, būtina laikytis terminų ir atsiimti prekę 30-ąją 2026 metų savaitę! TECHNINĖS DETALĖS Eigos ilgis X ašyje: 1 000 mm Eigos ilgis Y ašyje: 900 mm Eigos ilgis Z ašyje: 900 mm Veleno apsukos: 12 000 aps./min Įrankio tvirtinimas: BT50 Įrankių skaičius: 320 600 mm ilgio įrankiams skirtų vietų skaičius: 80 Padėties tikslumas: 0,001° STAKLIŲ DETALĖS Fgodpfxszd Tapo Ahred Valdymas: OSP-E100M Ašių skaičius: 4 Aušinimo skysčio slėgis: 30 bar Matmenys ir svoris Staklės: 4800 x 2980 x 3150 mm – 21,5 t Įrankių magazinas: 4500 x 2800 x 3150 mm – 6–7 t Drožlių transporterio matmenys: 4500 x 1600 x 2400 mm – 2 t, įskaitant aukšto slėgio siurblį Repo: 3000 x 1200 x 1500 mm, 0–0,5 t Darbo valandos NC ciklo laikas: 71 235 h Veleno veikimo laikas: 56 241 h Apdirbimo laikas: 44 673 h ĮRANGA ATC su 320 vietų 80 vietų 600 mm įrankiams 2 padėklai Balluff rašymo/skaitymo sistema NC stalas Absoliutiniai davikliai X, Y, Z ašyse Renishaw MP10 matavimo zondas Įrankio lūžio kontrolė MOP įrankio kontrolė 30 barų aušinimo skysčio sistema Mayfran Consep 2000 drožlių transporterio sistema

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, spaudimo jėga: 160 t, eigos ilgis: 500 mm, darbinis greitis: 30 mm/s, atbulinės eigos greitis: 40 mm/s, stalo plotis: 850 mm, stalo aukštis: 780 mm, gerklės gylis: 400 mm, alyvos bako talpa: 210 l, bendras ilgis: 3 370 mm, bendras plotis: 1 730 mm, bendras aukštis: 1 480 mm, bendras svoris: 6 500 kg, įrengimo aukštis: 400 mm, presavimo greitis: 3 mm/s, Įranga: dokumentacija / vadovas, Horizontal Boxer Hydraulic Press PYXWM-160. Manufacturer: WMW VEB Dessau - Year 1978. The machine has been serviced. Ready for operation. Max. pressing force: 160 tons. Piston stroke: 500 mm. Piston speed: Forward: 30 mm/sec Pressing: 2.5 mm/sec Backward: 40 mm/sec Height from base to center of piston: 260 mm. Height of machine frame: 780 mm. Base length from support tool: 600 mm. Length of support tool: 520 mm. Max. clamping width: 1730 mm. Working clamping width: 400 mm. Height of support tools: 400 mm. Support tool spacing min-max: 240-1100 mm. Overall dimensions: Length 3370 mm. Width 1730 mm. Height 1480 mm. Frame width: 700 mm. Fgedswndnuepfx Ahrod Motor power: 11 kW. Oil tank capacity: 210 liters.

Būklė: geras (naudotas), Gamybos metai: 2011, Ref. No.: 10598 Manufacturer: HELLER Model: MC 2000 Year of manufacture: 2011 Control type: CNC control Controller: Siemens 840 D sl Location: Halberstadt Country of origin: Germany Machine No.: 50XXXX X-axis travel: 800 mm Y-axis travel: 800 mm Z-axis travel: 1000 mm Working spindle torque (at 25% DC): 242 Nm Tool holder: SK 40 Number of tool stations in magazine: 54 Tool magazine equipped with: 80 pcs. Fgsdpfx Ajx Hn D Rehrsd Spindle speed: 10,000 rpm Main spindle drive power: 17 kW High-pressure pump: 50 bar Main spindle speed range: 10,000 rpm Number of pallets: 2 Pallet size (LxW): 630 x 500 mm Machine weight approx.: 13,000 kg Spindle hours: 7,000 h Operating hours: 14,000 h Set-up stations: 4 x 90° Hydraulic pressure: 200 bar Additional information: - Machine has been measured - Geometry is in excellent (1A) condition - Spindle runs somewhat rough - Clamping towers and tool holders included - 2 additional clamping towers - 2 spare pallets - 2-axis servo tool changer - Scraper conveyor for dry machining - Cold light in work area - Central cooling unit for motor spindle and electrical cabinet - Operator panel at the set-up station - NC-controlled rotary table - Clamping hydraulics Machine can be inspected under power by arrangement.

Būklė: geras (naudotas), Gamybos metai: 2017, Ref. No.: 10596 Manufacturer: HELLER Model: H - 2000 Year of manufacture: 2017 Control type: CNC control Fgodpfx Aex Hn D Dohrsd Controller: Siemens 840 D Location: Halberstadt Country of origin: Germany Machine No.: 56XXX X travel: 630 mm Y travel: 630 mm Z travel: 630 mm B axis: 0.001° Table load capacity: 500 kg Max. tool length: 350 mm Max. tool diameter: 160 mm Tool holder: HSK 63 Number of magazine tool positions: 80 Spindle speed: 16,000 rpm Tool changer: Double gripper Max. workpiece height: 850 mm Max. torque: 95 Nm Rapid traverse X/Y/Z: 60 mm/min Rapid traverse X axis: 80 m/min Rapid traverse Y axis: 80 m/min Rapid traverse Z axis: 90 m/min Spindle motor power: 40 kW Internal coolant supply: 50 bar Number of pallets: 2 Pallet size (L x W): 400 x 500 mm Spindle run time: 1,000 h Operating hours: 3,000 h Max. workpiece interference diameter: 720 mm Media interface: 5-way Additional information: - Equipped with NC rotary table - State-of-the-art spindle technology - Ideal for precision machining tasks - Spindle hours: 1,000 - Pallet manually rotatable 4 x 90° - Hydraulic pressure: 200 bar - Fast drill breakage detection Machine can be inspected under power by prior arrangement.

Būklė: geras (naudotas), Gamybos metai: 2008, Nuorodos Nr.: 10564 Gamintojas: TOYODA Tipas: FH 630 SX Pagaminimo metai: 2008 Valdymo tipas: CNC valdymas Valdymas: Fanuc 31i - A Sandėliavimo vieta: Halberstadt Kilmės šalis: Japonija Serijos Nr.: NS2XXX X eiga: 1000 mm Y eiga: 800 mm Z eiga: 850 mm B ašis: 360° Didžiausias ruošinio svoris: 800 kg Didžiausias įrankio svoris: 27 kg Didžiausias įrankio ilgis: 545 mm Didžiausias įrankio skersmuo: Ø 120 mm Didžiausias ruošinio dydis (ilgis x plotis x aukštis): Ø 1000 x 1000 mm Įrankio laikiklis: BT - 50 Įrankių magazinas: 60 vnt. Veleno greitis: 6000 aps./min Staklių ilgis: 7000 mm Staklių plotis: 3500 mm Staklių svoris apie: 20,1 t Papildoma informacija: - Įrengta aukšto slėgio aušinimu (IKZ) ir drožlių transporteriu Fedpfxoxvw Izo Ahrjgd - NC rotacinis stalas 360.000 x 0,001° Mašiną galima apžiūrėti prijungtą prie elektros pagal susitarimą.

Gamybos metai: 1983, būklė: geras (naudotas), FGSV 32 TOS KURIM milling machine. Year of manufacture: 1983 (Czech Republic). Specifications: Table: 320 x 1400 mm. Travels: X - 1000 mm, Y - 400 mm, Z - 450 mm. ISO 50. Spindle speed range: 35-1800 rpm. Distance between spindle and table: 140 - 590 mm. Distance between spindle and column: 120 - 520 mm. Max. table load: 500 kg. Main motor power: 11 kW. Power requirement: 15 kW. Dimensions (L x W x H): 2735 x 2425 x 2475 mm. Weight: 4200 kg. Fsdpfeh Ir Rmsx Ahrogd

Būklė: labai geros būklės (naudotas), Gamybos metai: 1978, Grinding length: 500 mm Grinding width: 200 mm O F F E R We can offer you the following from stock, subject to prior sale and errors: JUNG Universal Horizontal Surface & Profile Grinding Machine Fsdpfx Aozbczrehrogd Model: HF 50 RD Year of manufacture: 1978 _____ Max. grinding length: 500 mm Max. grinding width: 200 mm Table size: 600 x 200 mm Table speed: 1 – 20 m/min Working height under grinding wheel approx.: 350 mm Grinding wheel dimension: 225 x 25 x 51 mm Infinitely variable grinding wheel speed: 1,000 – 4,000 rpm Vertical feed: 0.001 – 0.01 mm/stroke Grinding spindle drive stepless, GS: 0.5 to 1.5 kW Total drive power approx.: 4 kW - 380 V – 50 Hz Weight approx.: 2,000 kg Accessories / Special features: • Thanks to the infinitely variable spindle speeds, this version is also suitable for grinding high-alloy tool steels. The grinding wheel diameter as well as the peripheral speed are set directly at the conversion cabinet. • Automatic grinding carriage feed for both surface and profile grinding operations, with • automatic feed cutoff via contact dial gauge • Automatic operation cycle – rough grinding, finish grinding, spark out – adjustable for all standard grinding processes with and without automatic feed, with continuous cross feed or with table reversal, plunge grinding and profile grinding without cross feed. • Rapid traverse for grinding head vertical adjustment, short-stroke function, fine cross feed • Digital readout for the Y-axis for precise positioning, especially for profile grinding. • Manual straight dresser mounted above the grinding wheel, separate radius dresser (DIAFORM dressing unit for profile dressing also available) • Built-in sine permanent magnetic chuck, 500 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and belt filter • Approx. 3 flanges with and without grinding wheels, balancing scale, operating manuals Condition: Good to very good! Suitable for all grinding tasks! Please click here for a video of the machine: HF50RD/4 Availability: Ex stock, immediate delivery possible, FCA Metzingen Payment: strictly net – after receipt of invoice Always a large selection of grinding machines in stock – please submit your enquiry!

Būklė: naudotas, Gamybos metai: 1981, Cutting diameter: 320 mm Saw band length: 4670 mm Cutting width: 580 mm Total power requirement: 7.4 kW Fjdpfx Ahst Hwrnjrjgd Machine weight approx.: 3 t Cutting range, round max.: 100 - 320 mm Rectangular max.: 100/100 x 320/460 mm Cut-off lengths min/max.: 0 - 580 mm Throat depth (stand to saw band) max.: 690 mm Infinitely variable cutting speed: 16 - 160 m/min Saw band dimensions L x Ø approx.: 4,670 x 38 mm Remnant piece length automatic/single cut: 100/10 mm Saw blade drive approx.: 4.4 kW Total drive: 7.4 kW - 380 V - 50 Hz Weight approx.: 3,000 kg Accessories / Special equipment: - Infinitely variable speed control of the saw band motor via actuator and STÖBER gearbox, with cutting speed display on the control panel - Infinitely adjustable saw feed with display of the current cutting speed - Piece counter with preset quantity selection, selector switch for single or multiple cuts - Indicators for band tension and feed rate - Automatic, motorised material feed, controlled via position processor type PP 160, input of required lengths; supplied with roller conveyor approx. 1,500 mm (extendable to approx. 2,000 mm) and a more stable roller conveyor approx. 3,500 mm for outdoor use - Integrated chip conveyor with coolant system - Attached control cabinet Condition: Good – ready for demonstration shortly Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice We look forward to your order. Further saws available from stock – please enquire.

Būklė: naudotas, Gamybos metai: 2000, Grinding length 1600 mm Grinding width 600 mm Workpiece height 500 mm Total power requirement 50 kW Q U O T A T I O N We are pleased to offer you, subject to prior sale and errors, ex stock: B L O H M CNC-controlled precision surface grinding machine Model PLANOMAT 616 with SIEMENS 840 D control Year of manufacture 2000 Serial no. 14 67x _____ _____ Grinding area 1,600 x 600 mm (!) Table dimensions 2,000 x 600 mm Working height under grinding wheel approx. 150 – 500 mm Max. longitudinal table travel X 1,700 mm Max. vertical movement of upper carriage Y 550 mm Max. cross movement of upper carriage Z 560 mm Max. workpiece weight approx. 800 kg Table speed X-axis 30 – 30,000 mm/min Min. cross feed Z-axis 0 – 4,000 mm/stroke Vertical feed Y-axis 0.001 – 0.099 mm/stroke Y/Z axis feed rate 4 – 4,000 mm/min Grinding wheel Ø x width approx. 400 x 100 mm Infinitely variable grinding wheel speed via GS motor 300 – 1,250 rpm Spindle drive max. approx. 27.5 kW Total power requirement approx. 50 kW - 400 V – 50 Hz Total weight approx. 10,000 kg Accessories / special equipment: • SIEMENS CNC control 840 D with screen; SIEMENS components, WINDOWS interface Model MMC 103/PCU 50, operator guidance for direct entry of all grinding parameters, including roughing/finishing/spark-out cycles, slot grinding with (cross-) indexing device, automatic shut-off upon reaching grinding depth and return to home position, grinding wheel management, dressing programs/cycles, hand-held remote, etc. • All axes driven by ballscrews, DITTEL contact control • Infinitely variable grinding spindle speed via direct GS motor • Table-mounted diamond wheel dressing unit type PEA, electrically driven, with DITTEL gap control device, and separate straight dresser with diamond fleece and compensation; dressing cycles integrated in the control Fodpfx Ahst Hxcberogd • Fitted magnetic chuck approx. 500 x 1,500 mm, make WAGNER, with demagnetising device • Attached electrical cabinet, separate flanges with wheels, separate oil mist extractor, complete work space enclosure with sliding door and glass insert • Large HOFMANN coolant system TECHNOPUR S 300 with cooling unit and grinding sludge conveyor, tank 1,600 l or 1,280 l, separate oil mist extraction, etc. Condition: Good to very good – soon ready for demonstration, extremely large and stable machine (!) Delivery: Ex stock – as inspected Payment: Strictly net – upon receipt of invoice We look forward to receiving your order. Further grinding machines of all types in stock. Please inquire.

Būklė: naudotas, Gamybos metai: 1973, Spindle diameter: 130 mm X travel: 3000 mm Y travel: 2000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Fgsdjt Hwt Sopfx Ahrod Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal: 3000 mm Y – Spindle head vertical: 2000 mm Z – Spindle stroke: 1000 mm Table plate (lower): 3300 x 2400 mm Load capacity per m²: 10 t/m² Built-up table approx.: xx,000 mm Min./Max. position of work spindle above table: 770 / 2770 mm Feed: 0.9 – 2000 mm/min Rapid traverse for spindle head and column: 5000 mm Quill feed: 0.5–1200 mm/min Speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: - Heidenhain 3-axis digital readout, hardened guideways, ball screws - Infinitely variable spindle speeds and feeds, separately motor-driven feeds - Travelling operator platform, pendant control panel, hand-held remote, platform - Hydrostatic guideway in column traverse - Clamp plate 3,200 x 2,500 mm planed, with T-slots; add-on table approx. 1400 x 2600 x 900 mm high, one side face machined - Hydraulic clamping for column/carriage, motorized tool clamping - Extensive accessories, particularly tool holders with and without tools Separate chip extraction unit, clamping aids, 1 clamping angle plate and plates, and much more

Būklė: naudotas, Gamybos metai: 1985, Wheel diameter – max. 80 mm Wheel width 150 mm Module – max. 2.5 Module – min. Total power requirement 10 kW Machine weight approx. 2,400 kg Fully automatic hobbing machines for worm gear cutting Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: Max. wheel diameter without parts magazine approx. 80 mm Max. wheel diameter with parts magazine approx. 50 mm Max. module 2 / 2.5 Axial cutting length approx. 150 mm Max. workpiece installation length approx. 200 mm Milling slide swivels up to 90 degrees Cutter – diameter 24 – 50/63 mm Max. radial travel of the milling slide 0–14/18 mm Max. milling cutter shift 25 mm Cutter speeds 212 – 2,000 rpm Axial feed rate stepless 0.05 – 4.0 mm/rot. Radial feed rate stepless 0.2 – 200 mm/min. Milling spindle drive 3 kW Total drive approx. 10 kW – 50 Hz – 380 Volt Weight approx. 2,400 kg Accessories / Special equipment: Fully automatic operating cycle and minimal auxiliary times enabled by freely programmable SIEMENS programmable controller S5 for all machining steps, e.g. rapid traverse, feed, cutter on/off, for loading device, tailstock, possible shifting, etc. With piece counter, program numbering, and 30-position digital error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm in length x 8 mm Ø, with pneumatic double gripper for loading and unloading workpieces; raw parts are placed in exchange cassettes outside and then inserted into the loading unit. The double gripper places the parts between the workpiece spindle and tailstock; the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and also returned to the (finished parts) cassette by the gripper. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: good – 3 machines available, currently 1 machine ready for demonstration and under power. Machine is set up for cutting worm shafts/armature shafts Fjdpfx Ahet Hw D Rorogd used in variable transmissions for automotive seat adjusters, window regulators, etc.

Būklė: labai geros būklės (naudotas), Gamybos metai: 2007, Pjovimo skersmuo: 220 mm Bendras galios poreikis: 0,7 kW Apytikslis įrenginio svoris: 0,240 t Fgedpsyw Ti Tsfx Ahrjd Aprašymas bus pateiktas vėliau! Įskaičiuota ritininė linija.

Būklė: labai geros būklės (naudotas), Gamybos metai: 1965, Šlifavimo ilgis: 600 mm Šlifavimo plotis: 250 mm Aprašymas bus pateiktas vėliau! Fgsdpoxy S D Eofx Ahrod

Būklė: naudotas, Gamybos metai: 1969, Grinding length 500 mm Grinding width 200 mm Workpiece height 250 mm Total required power 5.5 kW Machine weight approx. 2500 kg Space requirements approx. m J U N G Horizontal Precision Surface and Profile Grinding Machine Model HF 50 RD Year of manufacture approx. 1969 Machine No. 4082 _____ Maximum grinding length 500 mm Fgodpfxjt Hwzie Ahred Maximum grinding width 200 mm Table size 600 x 200 mm Table speed 1 – 20 m/min Working height under grinding wheel approx. 350 mm Grinding wheel size 225 x 25 x 51 mm Grinding wheel speed, infinitely variable 1,000 - 4,500 rpm Vertical infeed 0.001 - 0.01 mm/stroke Grinding spindle drive, continuously adjustable 0.5 to 1.5 kW Total drive power approx. 6 kW - 380 V – 50 Hz Weight approx. 2,500 kg Accessories / Special Equipment • This version, due to the infinitely variable speed range, is particularly suitable for grinding high-alloy tool steels. • Automatic infeed of the grinding carriage for surface and profile grinding operations with automatic infeed shut-off via dial indicator, as well as with dial indicator holder and dial indicator for height control. • Machine can be set for standard grinding operations with and without infeed, either with continuous cross movement or with table reversal, or for plunge grinding operations without cross adjustment. • Manual straight dresser mounted above the grinding wheel • Mounted permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separately standing wet grinding unit with coolant tank and belt filter • Separate converter cabinet for infinitely variable speed regulation and display of cutting speed. • Approx. 3 flanges with and without grinding wheels, rapid grinding head traverse, Condition : good – ready for demonstration under power, partially overhauled by specialized company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery : ex stock – as inspected Payment : strictly net – upon receipt of invoice

Būklė: naudotas, Gamybos metai: 1998, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 425 mm Total power requirement: 15 kW Machine weight approx. 4.5 t G E I B E L & H O T Z CNC Cycle-Controlled Precision Surface Grinding Machine Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Fodpfot Hxamjx Ahrsgd Max. grinding length (table longitudinal movement 900 mm): 800 mm Max. grinding width (cross movement 500 mm): 500 mm Max. grinding height under wheel approx.: 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical movement: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Grinding spindle drive approx.: 9 kW Total power approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Features: • Easy-to-program GEIBEL&HOTZ grinding cycle control • Type SL with standard grinding programs such as flat and multi-flat grinding with roughing – finishing – sparkout – return, plunge grinding, dressing cycle with compensation, stop at loading station; all inputs/parameters via operator touchscreen and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronic components including SIEMENS OP 25 • Table movement is via rolling ring thread drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical movements by precision ball screw drive • Diamond dresser on the left side of the table beside the magnetic plate with automatic dressing cycle, compensation, pull-back and edge rounding on grinding wheels possible • MPM balancing system for the grinding wheel • Built-in permanent electromagnetic chuck approx. 800 x 500 mm, fine-pole • Wet grinding equipment with separately standing belt filter coolant filter • Full enclosure with electrically monitored sliding doors • Freestanding control cabinet, work light, various accessories, operating manuals Condition: Good to very good condition! Suitable for large-area stock removal due to wide grinding wheel! A video of the machine will be available here soon. Delivery: Ex stock, immediate availability, FCA Metzingen Payment: Net - upon receipt of invoice

Būklė: naudotas, Honing diameter: 165 mm Stroke: 120 mm Center height: 100 mm Total power requirement: 1.5 kW Machine weight: approx. 1 t SUNNEN (USA) Horizontal Automatic Honing Machine Model: MBC 1804 G Year of manufacture: 1K1-90075 Honing range – Ø with measuring control: 1.5 – 51 mm with automatic stroke: 1.5 – 95 mm with manual stroke: 1.5 – 165 mm Max. workpiece length: approx. 400 mm Max. workpiece length with measuring control: 254 mm Fjdpfx Aow U U Iqshrsgd 12 spindle speeds: 200 – 2,500 rpm 5 stroke rates: 80 – 310 strokes/min Stroke length (automatic stroke): 6 – 120 mm Drive for honing spindle/stroke motor: 0.75 / 0.37 kW – 380 V – 50 Hz Total drive: approx. 1.5 kW – 380 V – 50 Hz Accessories / Special Features: • Automatic machining cycle with automatic mechanical stroking, automatic hydro-mechanical expansion of honing tools, and automatic shut-off when target diameter is reached. • Electromechanical measuring control opposite the tool spindle for receiving a measuring probe of the set diameter, which triggers the automatic shut-off. • Infinitely adjustable expansion pressure • Foot switch for manual operation • Built-in honing oil supply • Operating manuals. Unfortunately, no tool holders or other accessories are available. Condition: Very good condition! Suitable for all honing applications. A video of the machine will be available shortly – please click here soon. Delivery: ex stock, immediate availability, FCA Metzingen Payment: strictly net – payment upon receipt of invoice.

Būklė: naudotas, Gamybos metai: 1992, Wheel diameter – max. 150 mm Wheel width 300 mm Module – max. 4.5 Module – min. (not specified) Total power requirement 20 kW Machine weight approx. 6 t Space requirement approx. (not specified) CNC-controlled horizontal hobbing machine with workpiece portal loader, model A 35 / 36 CNC, year of manufacture 1992 Workpiece diameter / wheel diameter with automatic loading max. 150 mm Workpiece diameter with manual loading max. 200 mm Max. workpiece length approx. 400 mm Axial milling length (Z axis) 300 mm Module range for HSS/Carbide cutters 3 / 4.5 mm Number of teeth min./max. 2–999 Centre distance tool–workpiece min./max. 0–190 mm Workpiece rotation speed max. 0–350 rpm Milling slide swiveling left/right 50 / 60° Cutter size Ø x length 102 x 230 mm Cutter shift max. (Y axis) 100 mm Radial slide travel max. (X axis) 10–150 mm Tailstock travel max. (W axis) 420 mm Cutter speed stepless 0–1,500 rpm Feed range on all axes steplessly adjustable 3.5 or 4 m/min Spindle drive approx. 8.8 kW Total power approx. 20 kW – 220 V/400 V / 50 Hz Weight approx. 6,000 kg Accessories / Special Equipment: MIKRON CNC control type 788 (BWO) with monitor for a total of 8 axes (ABC and WYZ and WV) with conversational programming for creating various gearing cycles, such as helical gearing, worm and worm wheel gearing, crowned gears, with and without shifting, as well as further subprograms. Heavy duty shifting milling head with high cutter speeds and long shifting path, also for 2 cutters, with quick-change system and hydraulic counterbearing. Workpiece spindle head (C) with quick-change system (collet chuck) Heavy tailstock with 420 mm travel (W), in combination with an automatic workpiece loading device from GÜDEL Switzerland with a linear portal loader (approx. 1000 mm stroke (V)), swiveling double gripper with jaws for loading and unloading shaft-shaped workpieces (currently approx. 60 mm length x 25 mm Ø x module 1.5), however, without workpiece storage device. Fgsdst Hwxbjpfx Ahred Separate coolant unit with magnetic chip conveyor Enclosed full machine guarding with sliding doors 2 machines with workpiece marking devices by BORRIES, unfortunately otherwise without accessories.

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2006, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: GN08201038G, veleno greitis (maks.): 4 500 aps./min, plotis centre: 460 mm, valdiklio modelis: Fanuc 0i-Mate TO, galia: 15 kW (20,39 AG), Nėra minimalios kainos – garantuojamas pardavimas už didžiausią pasiūlymą! TECHNINĖS CHARAKTERISTIKOS Staklių lovio apdirbimo skersmuo: 250 mm Atstumas tarp centrų: 460 mm Veleno skersmuo: 62 mm Fgodpezk D Ansfx Ahrod Maksimalus veleno greitis: 4 500 aps./min. Išimamos staklių lovies apdirbimo skersmuo: 460 mm STAKLIŲ APRAŠYMAS Valdiklis: Fanuc 0i-Mate TO Galia: 15,0 kW Matmenys ir svoris Matmenys (ilgis x plotis x aukštis): 2 790 x 1 570 x 1 750 mm Svoris (tuščias): 4 300 kg Transportavimo paketai: 2 ĮRANGA Išimama staklių lovis CE ženklas

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2002, Funkcionalumas: visiškai funkcionalus, plotis centre: 1 600 mm, centro aukštis: 275 mm, veleno greitis (maks.): 3 500 aps./min, valdiklio modelis: Fagor 8055, galia: 15,5 kW (21,07 AG), Minimalios kainos nėra – garantuojamas pardavimas už aukščiausią pasiūlymą! TECHNINĖS SPECIFIKACIJOS Maksimalus aukštis: 275 mm Apsisukimo skersmuo (staklės): 550 mm Apsisukimo skersmuo (slankis): 310 mm Fsdpfx Aszk D Abohrogd Atstumas tarp centrų: 1600 mm Staklių pločio: 420 mm Veleno skersmuo: 82 mm Veleno greitis: 80–3500 aps./min. Maksimalus apdirbamo gaminio svoris: 2000 kg Apsisukimo skersmuo (nuimamas staklės): 790 mm STAKLIŲ INFORMACIJA Valdymo sistema: Fagor 8055 Galia: 15,5 kW Matmenys ir svoris Matmenys (ilgis x plotis x aukštis): 3600 x 2150 x 220 mm Svoris (tuščias): 5000 kg ĮRANGA Pastovi atrama Nuimamas staklės Trijų žandikaulių griebtuvas Besivartanti atrama

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 2003, veikimo valandos: 10 975 h, Funkcionalumas: visiškai funkcionalus, veleno greitis (maks.): 5 000 aps./min, X ašies eiga: 260 mm, Z ašies eigos atstumas: 635 mm, plotis centre: 600 mm, centro aukštis: 340 mm, valdiklio modelis: Siemens Sinumerik 840D SL, Nėra minimalios kainos – garantuojamas pardavimas už aukščiausią pasiūlymą! TECHNINĖS SPECIFIKACIJOS Maksimalus aukštis: 340 mm Maksimalus atstumas tarp centrų: 600 mm Stalo skersmuo: 680 mm Slanklės skersmuo: 565 mm Veleno kiaurymė: 65 mm Maksimalus veleno greitis: 5 000 aps./min. X ašies eiga: 260 mm Y ašies eiga: 635 mm ĮRANGO SPECIFIKACIJOS Fgedezk Dz Rspfx Ahrsd Valdymo sistema: Siemens Sinumerik 840D SL Galia: 25,0 kW Matmenys ir svoris Matmenys (ilgis x plotis x aukštis): 4 500 x 2 500 x 2 300 mm Svoris (tuščio): 6 500 kg Darbo valandos: 10 975 val. ĮRANGA Drožlių šalinimo įrenginys Trijų žandų įtvaras

Būklė: paruoštas naudoti (naudotas), Gamybos metai: 1998, Funkcionalumas: visiškai funkcionalus, mašinos/transporto priemonės numeris: 161, plotis centre: 1 500 mm, centro aukštis: 250 mm, veleno greitis (maks.): 2 400 aps./min, valdiklio modelis: Heidenhain Manual-Plus, Nėra minimalios kainos – garantuotas pardavimas už aukščiausią pasiūlymą! TECHNINĖS SPECIFIKACIJOS Maksimalus aukštis: 250 mm Apsisukimo skersmuo lovyje: 500 mm Apsisukimo skersmuo važiuoklėje: 340 mm Atstumas tarp centrų: 1 500 mm Lovo plotis: 315 mm Fsdpfx Ahjzk Dwroregd Veleno skersmuo: 80 mm Veleno greitis: 20–2 400 aps./min. STAKLŲ INFORMACIJA Valdymas: Heidenhain Manual-Plus Programavimas: „Teach-in“ Galia: 11,0 kW Matmenys ir svoris Matmenys (ilgis x plotis x aukštis): 3 150 x 1 650 x 1 800 mm Svoris be apkrovos: 2 500 kg ĮRANGA Greito tvirtinimo laikiklis Trijų žandų įtvaras CE ženklas