Plokštės gręžimo staklės - Horizontaliosios

COLLET & ENGELHARDT BF 130 - 11

Sąlyga: visiškai atnaujintas (naudotas), Gamybos metai: 2011, Funkcionalumas: visiškai funkcionalus, GF AgieCharmilles CUT 400 Year of manufacture: 2011 Control: Charmilles Millenium Dedpfx Abeuuz Iie Seul Travel paths (X / Y / Z): 800 x 550 x 510 mm Travel paths (U / V): 800 x 550 mm Max. taper angle: +/- 30° at 510 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1450 x 900 x 510 mm Maximum workpiece weight: 3,000 kg Cutting speed up to 400 mm²/min Best surface finish: Ra 0.2 µm Available wire diameters: 0.20 mm to 0.30 mm Incl. option for large wire spool with 25 kg (K250) Dimensions of the complete system: 2670 x 2870 x 2645 mm Total system weight: 6,300 kg Upon receipt of order, the machine will be cleaned, fully overhauled, and tested for all functions by us. Options: - Commissioning of the machine at your site - On-site training - Chiller unit - Transport - Clamping rail set

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1977, Grinding diameter: 350 mm Grinding length: 1000 mm Centre height: 100 mm Grinding wheel diameter: 360 mm Total power requirement: kW Machine weight approx. 3.8 t Dusdpfx Aeunt Eyob Sel Space requirements approx. 3.5 x 1.3 x 1.5 m Machine in very good condition! External and internal spindle. Extensive accessories included.

Sąlyga: geras (naudotas), Gamybos metai: 1994, CNC Spiral-Biegemaschine, Kapazität 50 cm³, min.-max. Wickeldurchmesser 500–3.500 mm. Dujdpfx Aoiu Acpob Sol

Sąlyga: naujas, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900 x 900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-level sawing technology and best-in-class performance when cutting specialty steels. • The electro-welded machine frame and steel saw bow meet all cutting requirements and eliminate vibrations and noise. Duedpfofg E Hpjx Ab Sel • The chip conveyor is hydraulically driven and the speed is adjustable. • All machine movements (saw frame, vise, feed, saw band guides) are controlled by modern linear guides, ensuring high static and dynamic load capacity as well as minimal sliding friction. • Another key feature are the rollers for material positioning, driven by a hydraulic motor. They move at a right angle to the material, ensuring optimal clamping positioning. • Thanks to the height control of the saw band position, the operator can place the blade close to the top edge of the material. After the cut, the band automatically returns to its previous position. Alternatively, 'remain' at the lower position can be selected. During the cutting cycle, the software compares the sawing load with the preset value. Thus, the sawing system can be stopped in the event of irregularities. • The saw band is cleaned by two adjustable steel brushes, driven hydraulically. • The hydraulic unit, including filter and pressure gauge, ensures particularly smooth operation at a constant pressure. • Finely ground carbide inserts clamp the saw band, complete with lateral, hardened, adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. • The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. The tension is automatically released after a preset time if the machine is idle or after completion of a cycle. • Automatic version with CNC control in X-TECH 900 / 1200 models, with a feed length of 500 mm, available for high-volume production series. • The material is supported by a table with seven rollers, driven by a hydraulic orbital motor, ensuring precise positioning even under maximum load. • All guided movements are driven by four recirculating ball guides, designed for high static and dynamic load capacity, significantly reducing feed friction. Hardened and ground prismatic guides. Price on request.

Sąlyga: naujas, Pre-bending: 13.0 mm Sheet length: 3,100 mm Sheet thickness: 16.0 mm Total connected load: 17.5 kW Approx. weight: 11.6 t Dimensions (LxWxH): 5.31 x 1.66 x 1.59 m Image similar to actual product Bending capacity: 16.0 mm Dodpfxod Auace Ab Soul » at 3x upper roll diameter Pre-bending: 13.0 mm » at 1.5x upper roll diameter Upper roll diameter: 300 mm Lower roll diameter: 270 mm Side roll diameter: 210 mm Max. opening: 50 mm Working height: 1,140 mm • Fully hydraulic drive of upper and lower rolls via planetary gearboxes • Digital display for side roll positions • Hydraulic drop-end bearing • Cone bending device • Hardened rolls • Hydraulic adjustment of side rolls, synchronized via PLC • Hydraulic adjustment of lower roll via torsion shaft • Pressure-adjustable lower roll • Electric and hydraulic overload protection • Mobile control console • Operating manual in GERMAN and ENGLISH • Machine and equipment conform to CE regulations Important points for cone rolling: • Maximum sheet thickness is 50% of the rated capacity • Cone length may be max. 30%, or must be more than 60%, of the roll length • Hardened rolls are recommended

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Funkcionalumas: visiškai funkcionalus, X ašies eiga: 1 500 mm, Y ašies eiga: 700 mm, Z ašies eigos atstumas: 610 mm, nominali (akivaizdi) galia: 37 kVA, sukimo momentas: 236 Nm, valdiklių gamintojas: Heidenhain iTNC530, valdiklio modelis: iTNC530, stalo plotis: 700 mm, stalo ilgis: 1 700 mm, stalo apkrova: 700 kg, sukimosi greitis (maks.): 12 000 aps./min, bendras svoris: 9 000 kg, veleno greitis (maks.): 12 000 aps./min, veleno veikimo valandos: 16 580 h, ašies variklio galia: 37 W, ašies skaičius: 1, įrankių magazino lizdų skaičius: 48, Įranga: dokumentacija / vadovas, drožlių transporteris, 3-axis CNC machining center Heidenhain iTNC530 X travel: 1500 mm Y travel: 700 mm Z travel: 610 mm Dujdpfxjvz Tyus Ab Sjl Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 tools Rapid traverse: 36 m/min Table load capacity: 700 kg Through-spindle coolant: 20 bar Chip conveyor Handwheel

Gamybos metai: 1984, Sąlyga: paruoštas naudoti (naudotas), Rafamet UBB 112/2 Minimální průměr běhounu kola: 700 mm Maximální průměr běhounu kola: 1120 mm Délka upnutí: 540 - 1050 mm Minimální délka nápravy dvojkolí: 1640 mm Maximální délka nápravy dvojkolí: 2800 mm Maximální šířka pneumatiky: 150 mm Maximální hmotnost dvojkolí: 4000 kg Rychlost posuvu saní: 2000 mm/min Maximální posuv saní: 2000 mm/min Výkon hlavního pohonu: 80 kW Hmotnost cca: 40 000 kg Duodpfxohvml Is Ab Sol

Sąlyga: paruoštas naudoti (naudotas), Gamybos metai: 2001, CNC Milling Machine TOS TV-1000 A CONTUR Manufacturer: Trens Model: MC 100 VA Year of manufacture: 2001 Condition: Used Control unit: Heidenhain TNC 426 X-axis travel: 1000 mm Y-axis travel: 600 mm Z-axis travel: 760 mm Table length: 1080 mm Table width: 580 mm Tool changer with 40 positions Dusdpfx Abohlp Iws Sel Tool holder: ISO 40 Spindle speed: 8,000 rpm Overall dimensions: L 3,200 x W 2,100 x H 2,900 mm Weight: 6,200 kg Shipping possible throughout Germany and Austria. Surcharge €1,000 Sale excludes warranty.

Sąlyga: paruoštas naudoti (naudotas), TOS GEAR HOBBER FO16 Didžiausias ruošinio skersmuo: 1600 mm Krumplyno plotis: 560 mm Djdjxwl R Tjpfx Ab Sjul Didžiausias modulis: 16 Didžiausias ruošinio svoris: 7000 kg Stalo paviršiaus plotas: 1350 mm Sukimosi greitis: 16 – 80 aps./min Padavimai – ašinis: 0,05 – 1,5 mm/min Padavimai – radialinis: 0,25 – 6 mm/min Padavimai – tangentialinis: 0,13 – 4 mm/min Elektra – įtampa/dažnis: 380/50 V/Hz Bendra galingumo paklausa: 12 kW Staklių svoris apie 18,5 t Staklių matmenys apie 4,3 x 2,0 x 3,2 m Staklės turi papildomą galvą, komplektą krumpliaračių ir velenų. Yra vaizdo įrašas su veikiančiomis staklėmis.

Sąlyga: labai geros būklės (naudotas), Tuscan LC38 x 3000mm CNC Drehmaschine Umlaufdurchmesser über Bett: 970 mm Umlaufdurchmesser über Planschlitten: 420 mm Spitzenhöhe: 490 mm Spitzenweite: 3000 mm 12-fach Duplimatic Revolver Dsdpfsvtw Imox Ab Sjul Reitstock Ausbohrstangenhalterung Ausbohrstange 2 x 3-Punkt-Feste Lünette 1 x Mitlaufende Lünette Fanuc OiTC Steuerung C-Achse & angetriebene Werkzeuge Seriennummer: LC223806086 Baujahr: 2010 /10