Trens Centro Tekinimo Staklės pirkti naudotą (51 153)

Būklė: geras (naudotas), Funkcionalumas: visiškai funkcionalus, Įrenginys, skirtas apdirbti paviršius ir centruoti – FZWD 160. Nodpfx Apsz E Aw Denodc

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis Digital Readout K&C NEW. Refurbished with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 87 160 760 >> Centre Height: 160 mm >> Centre Distance: 650 mm Nedpfx Aevrdlcspnodc >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose, DIN 55027 Size 5 with Bayonet Lock >> Tailstock Taper: MK 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: Approx. 680 kg >> Spindle Brake, Switchable >> Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories & Equipment: >> 3-axis Digital Readout by K&C, new, 12 months manufacturer warranty, with instruction manual Functions: mm/inch switching, ABS/INC coordinate mode, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switching >> New collet chuck system; NEW collets from 3 to 25 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating instructions, spare parts list (PDF) About the Machine: This listing is for a Weiler Praktikant 160 B engine and feed shaft lathe, refurbished to toolmaker accuracy and fully geometrically overhauled. Supplied with inspection protocol for new machine tolerances. For safety: electronic working spindle guard, lead and feed shaft covers, two emergency stops, and a braked motor. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site to satisfy yourself of its condition.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Speed range: 60 - 3,000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Equipment and Accessories: >> 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws Ndedovtp Edopfx Apnec >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electric spindle guard About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the production of ground-like surface finishes. Take the opportunity to view this machine under power on-site and see its condition for yourself.

Būklė: naudotas, Gamybos metai: 1995, tekinimo skersmuo virš slankiojančio stalo: 500 mm, Universal Lathe Make: ZMM Type: 500 Year: 1995 Technical Data Manufacturer: ZMM Sliven Model: Universal 500 Year of manufacture: 1995 Distance between centers: 1000 mm Nodpowudhujfx Apnodc Swing diameter over bed: 500 mm Spindle bore: 73 mm Dimensions (L x W x H): 2.7 x 1.2 x 1.8 m Weight approx.: 3100 kg Equipment • 3-jaw chuck Röhm ZS 350 mm • Quick-change toolholder • Live center • Coolant pump • Machine lamp All information subject to change. A powered demonstration is possible at any time in our showroom.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: Ndodpfx Apou Aftgsnsc >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speeds: 60 - 3000 rpm, 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 (MT 2) >> Feeds: 0.03 to 0.15 mm/rev >> Available threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A quick-change tool post with 3 holders >> Stop >> Change gears About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is highly user-friendly and can produce surface finishes comparable to grinding. You are welcome to inspect the machine under power on site to verify its condition.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 Ndsdpfxovivmys Apnoc >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm in 1 mm steps, new About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages move smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced to a near-ground finish. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Display, NEWLY Refurbished with Inspection Report for New Machine Tolerances Technical Specifications: >> Machine No. 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: from 0.026 to 0.888 mm/rev Ndjdpfsvrckqox Apnjc >> Thread cutting possible: Metric, Inch, Module and Diametral Pitch >> Metric Thread Pitch: from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake switchable >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis K&C Digital Readout, new, 12 months manufacturer's warranty with user manual Functions: mm/inch selection, coordinate choice ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 200 mm wedge-bar 3-jaw chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant device >> LED machine lamp For safety the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the Machine: Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been newly ground and scraped. Delivery includes an acceptance report according to inspection protocol. Coated with high-gloss 2K white paint. The Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs extremely smoothly. This latest generation of Weiler lathes is especially user-friendly and allows the production of ground-like finishes. You are welcome to inspect the machine under power on site to convince yourself of its condition.

Būklė: geras (naudotas), Gamybos metai: 1972, LZ tekinimo staklės Gamintojas: HEIDENREICH & HERBECK, modelis: 21RO, pagamintos 1972 m. Su greito keitimo laikikliu Parat, 10 vnt., staklių dokumentacija, sriegių rodyklė, konuso centras, Forkardt 250 mm griebtuvas. Ndedpfot Ipi Isx Apnsc Didžiausias tekinimo diametras virš lovio: 430 mm Didžiausias tekinimo diametras virš atramos: 255 mm Centro atstumas: 1000 mm Tekinimo ilgis: 750 mm Velieno apsisukimų skaičius: 19-2000 aps./min., 5,5 kW variklis Velieno anga: 56 mm Kiti duomenys žr. duomenų lape Užimamas plotas: ilgis 2900 mm, plotis 1100 mm, aukštis 1300 mm, svoris apie 1750 kg. Prieinami staklių dokumentai. Yra aušinimo įranga, drožlių atitvaras. Staklės geros būklės, galima parodyti su įjungta elektra.

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Universal lead and feed screw lathe Brand: WEILER Model: Condor B Year of manufacture: 1989 - overhauled newly painted RAL 7035 light grey Machine No.: 1401 Ndedsg R S Rcspfx Apnjc with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electric interlock, new - Size B quick-change toolpost base - Bed stop - Coolant system - Chip guard/rear panel - Operating manual - used, as seen -

Būklė: naudotas, Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Weiler / Contec (licencinė gamyba) Matador tekinimo staklės, pagaminimo metai 1993, su 3 ašių Elesta skaitmenine indikacija, keturių žandikaulių griebtuvu, Multifix, galiniu purškimo apsauginiu, elektrine griebtuvo apsauga. Staklės geros, paruoštos naudoti būklės, pagal susitarimą galima parodyti veikiančias. Ndodpexp Rvlsfx Apnoc

Būklė: naudotas, Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Weiler / Contec (licencinė gamyba) Matador tekinimo staklės, pagaminimo metai 1993, su 3 ašių Elesta skaitmenine indikacija, keturių žandikaulių griebtuvu, Multifix, galiniu purškimo apsauginiu, elektrine griebtuvo apsauga. Staklės geros, paruoštos naudoti būklės, pagal susitarimą galima parodyti veikiančias. Nsdjxp Ru Uspfx Apnodc

Būklė: geras (naudotas), Gamybos metai: 2004, Multipurpose Lathe ELBERON Type: GRC300X750 Chuck: 130 mm In good condition. For technical data, please refer to the data sheets. Ndsdpfxswah Rqj Apnoc

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 800 mm, tekinimo skersmuo virš slankiojančio stalo: 800 mm, tekinimo skersmuo virš viršutinio vežimo: 530 mm, tekėjimo ilgis: 3 000 mm, The PORĘBA TPK-80/3M universal lathe has been extensively rebuilt and modernized by us. It features technical parameters that correspond to the specifications and operational documentation of a new machine, meets the technical acceptance standards of WOT and Polish norms, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: in stock, powered up, available for inspection at any time Technical Specifications: - Distance between centers/turning length: 3000 mm - Swing over bed: 800 mm - Swing over cross slide: 530 mm - Swing in gap: 1080 mm - Spindle bore: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: Ndedpsfknw Rsfx Apnoc - Overall length: 5,000 mm - Width: 1,800 mm - Height: 1,800 mm - Total weight: 6,200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital readout for 2 axes, including display, installation, and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–600 mm, with rollers - MULTIFIX quick-change tool post

Būklė: naujas, Gamybos metai: 2022, The technique is intended for concentration, calming the mind, and decision-making. Dimensions; Height 2.8m , Diameter 1.6 m Made in Lithuania ,"MITRONAS Engineering" Ndedpfx Ajyhahijpnsc

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1990, Universal lead- and feed-screw lathe Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 1990 – overhauled Newly painted RAL 7035 light grey Machine no.: 90-160-2054 Center height: 160 mm Distance between centers: 650 mm Geometric acceptance with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant system - Electrically interlocked chuck guard - Size A quick-change toolholder - Simple bed stop - Chip guard rear wall Nsdpshy Tdyefx Apnsdc - Operating instructions With warranty Used, as seen The machine is technically at the level of its year of manufacture.

Būklė: geras (naudotas), Gamybos metai: 1962, LZ tekinimo staklės, gamintojas VDF HEIDENREICH&HARBECK, tipas: 24 RO, pagaminta 1962 m., kapitaliai suremontuota 1992 m. Su 3 ašių skaitmeniniu indikatoriumi Heidenhain, 250 mm Forkardt griebtuvu, Multifix B įrankio laikikliu. Centros aukštis: 255 mm Tekinimo skersmuo virš lovos: 510 mm Tekinimo skersmuo virš skersinio vežimo: 270 mm Centro atstumas: 1000 mm Veleno anga: 55 mm Veleno apsukų diapazonas: 20–900 aps./min. Ndedpfoxziuwex Apnsc Variklio galia: 6,5 kW Staklės geros būklės, yra elektros schemos. Reikalinga vieta: ilgis 3 m, plotis 1,2 m, aukštis 1,3 m, svoris apie 1800 kg.

Būklė: geras (naudotas), Gamybos metai: 2010, Centre Lathe Manufacturer: JET Type: GHB-1330 Year: 2010 Ndodjqwgzqspfx Apnjc Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix toolholder size A, 2 steadies, and coolant system. Swing over bed: 330 mm Swing over cross slide: 197 mm Centre distance: 750 mm Spindle speeds: 70–2000 rpm Spindle bore: 38 mm Machine in good condition, from a training workshop. Machine documentation available.

Būklė: naujas, Gamybos metai: 2025, For up-to-date pricing and delivery times, please inquire. Dimensions and Weights: Length (product): approx. 3265 mm Width/Depth (product): approx. 1065 mm Height (product): approx. 1550 mm Weight (net): approx. 1965 kg Working Areas: Centre height: 230 mm Centre distance: 2060 mm Swing diameter over bed: 460 mm Swing diameter in gap: 690 mm Swing diameter over cross slide: 270 mm Turning length in gap: 240 mm Bed width: 300 mm Speed Range: Number of speed ranges: 12 Speed range: 25 – 2000 rpm Electrical Data: Main drive motor power: 5.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant system Coolant pump power: 125 W Spindle: Ndjdpfoq Ukbpex Apnec Spindle mount: Camlock DIN ISO 702-2 No. 6 Spindle bore/bar capacity diameter: 58 mm Max. tool holder height: 25 mm Spindle taper: MT 6 Tailstock: Tailstock taper: MT 4 Tailstock quill travel: 130 mm Tailstock quill diameter: 60 mm Thread Leads: Metric pitch: 0.1 – 14 mm/rev Number of metric threads: 41 Inch pitch: 112 – 2 TPI Number of inch threads: 41 Diametral pitch: 4 – 112 DP Number of diametral threads: 50 Module pitch: 0.1 – 7 mm/rev Number of module threads: 34 Travels: Cross slide travel: 125 mm Compound slide travel: 285 mm Bed carriage travel: 1805 mm Feeds: Longitudinal feed range: 0.031 – 1.7 mm/rev Number of longitudinal feeds: 42 Cross feed range: 0.014 – 0.784 mm/rev Number of cross feeds: 42 Electrical Connection: Total connected load: 5.8 kW

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 660 mm, tekinimo skersmuo virš slankiojančio stalo: 900 mm, tekėjimo ilgis: 2 000 mm, veleno greitis (maks.): 710 aps./min, bendras svoris: 7 000 kg, Poreba TPK 90A1/2M Futterdurchmesser: 800 mm Spitzenweite: 2.000 mm Umlaufdurchmesser über Bett: 900 mm Umlaufdurchmesser über Support: 660 mm Spindeldrehzahl: 710 min⁻¹ Nsdpfx Aswbd Dvepnedc Gewicht: ca. 7.000 kg

Būklė: naudotas, Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 640 mm, centro aukštis: 320 mm, tekėjimo ilgis: 2 000 mm, VDF pavaros ir tempiamosios tekinimo staklės su skaitmeniniu indikatoriumi, varomas viršutinis skersinis, 3 ašių pastūmos sistema su greita eiga, 3 žandų tekė, plokštuma, Multifix įrankių laikiklis su 5 antgaliais. Ndodpexz Edzsfx Apnsc

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet and 3-Axis Digital Readout Fagor from UNI Technical Data: >> Centre Height: 120 mm >> Centre Distance: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal Feeds, Facing Feeds >> Thread Cutting: metric, module, inch >> Stepless Speeds from 30–3000 rpm Accessories: Ndjdpfsxyh Ndjx Apnec 3-Axis Digital Readout Fagor Tool Cabinet including: >> 3-jaw chuck >> 4-jaw chuck >> Tool holder >> Drill chuck; live center >> Collet system with collets >> Fixed and travelling steadies >> Machine mounts >> and much more About the Machine: For sale is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all move smoothly and evenly. Even at high speeds, the Lorch runs quietly. Equipped with a Fagor 3-axis digital readout and many accessories. The machine was previously located at a university. Take advantage of the opportunity to inspect the machine under power on site and see the excellent condition for yourself.

Būklė: naudotas, Hydraulic self-centering steady rest, Lünette, Lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Steady rest base: 245 x 240 mm Design: fixed - 3 pcs. roller bearings Ø 35 mm - Roller width: 18 mm - hydraulic self-centering Dimensions (L x W x H): 350 x 250 x 550 mm Net weight: 65 kg Good condition Nedoiv Irlepfx Apnsdc

Būklė: naujas, Gamybos metai: 2024, Akcijos kaina: 42 000 € (vietoj 49 900 €), be PVM. Iš karto galima įsigyti / Pagaminta Italijoje. Įtraukta aukščiausios klasės įranga: - „Heidenhain ND5023“ 3 ašių padėties indikatorius - 5 padėčių ilginis atraminis blokas staklėms - „SRW-Amestra Multifix C“ greito keitimo laikiklis su 4 įdėklais - LED darbo zonos apšvietimas - „Spinelli“ lygiavimo plokštelių komplektas Standartinė įranga: - Dviguba mechaninė sankaba - Elektromagnetinis stabdys - Greiti žingsniai - Oro tiekimo sistema ant galinio stovo, kad būtų lengviau reguliuoti padėtį išilgai staklių lovio - Lovis, kojos, galinis stovas, galinis stovo laikiklis ir staklės iš ketaus - Lovio kreipiančiosios yra indukciškai grūdintos ir poliruotos - Galinis stovas su indukciškai grūdintais ir poliruotais pavarų ratais - Velenas sumontuotas ant didelio tikslumo guolių - Trinties neturintis staklės judėjimas - Elektros sistema sandariame spintelėje su „Siemens“ ir (arba) „Schneider“ komponentais - Veleno reduktoriaus įvorė - 2 ribiniai punktai - Drožlių apsauga su mikro jungikliu, revoliucinė plexiglass apsauga, galinė apsauga per visą staklių ilgį, apsauga nuo veleno ir gręžimo stiebo, avarinis sustabdymo mygtukas - Drožlių surinkimo bakas ant ratų - Aušinimo sistema su elektropumpu - Centrinė kreipiančiųjų tepimas su automatine pompa - Besisukantis ir fiksuotas fiksatorius - Servisinis įrankių rinkinys ir veržliarakčiai, patikros sertifikatas, elektros schema, naudojimo ir priežiūros vadovas - Staklės pagamintos pagal ES normas Papildoma įranga: Ndedspq R Rdepfx Apnec - 3- / 4-žandų tvirtinimo įrenginys Techniniai duomenys: - Ašies aukštis: 260 mm - Maksimalus apdirbamojo detalės skersmuo virš lovio: 520 mm - Maksimalus apdirbamojo detalės skersmuo virš staklių judančios dalies: 300 mm - Maksimalus apdirbamojo detalės skersmuo be tilto: 690 mm - Ašies atstumas: 1500 mm - Lovio plotis: 400 mm - Veleno skersmuo: 105 mm - Veleno kūgis: 11" Camlock - Veleno greičio lygiai: 12 - Veleno greitis: 16 - 1200 aps./min - Pagrindinio variklio galia (S1 - 100 %): 7,5 kW (pasirenkama 9,2 kW) - Ilgalaikis judėjimas: (93) 0,028 - 6,43 / (65) 0,063 - 2,52 mm/aps. - Skersinis judėjimas: (93) 0,012 - 2,73 / (65) 0,027 - 1,07 mm/aps. - Metrinė sriegio žingsnis: (54) 0,5 - 224 / (22) 1 - 14 mm - Whitworth sriegis: (54) 1/8 - 72 / (25) 2 - 28 tpi - Modulinis sriegis: (54) 0,5 - 112 / (18) 0,5 - 7 mm - Diametrinis žingsnis: (54) 1/4 - 64 / (24) 4 - 56 dp - Skersinio judėjimo kelias: 340 mm - Viršutinio judėjimo kelias: 150 mm - Galinio stovo kūgio skersmuo: 85 mm - Galinio stovo kūgio judėjimas: 200 mm - Galinio stovo kūgio tvirtinimas: MK5 - Bendras svoris: 3200 kg

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, veleno skylė: 40 mm, centro aukštis: 160 mm, plotis centre: 650 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe equipped with a new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine undergoes comprehensive partial refurbishment in our workshop so that it is in excellent technical and optical condition. All guideways are in good order, the gearboxes run quietly, and the levers operate smoothly. You are welcome to inspect the machine on site and convince yourself of its condition. Ndodpfx Apswhzdmjnec Availability: On request Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Longitudinal carriage feed range: 0.020 – 0.630 mm/rev Cross slide feed range: 0.006 – 0.200 mm/rev Thread cutting types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: Switchable Total connected load: 7.5 kVA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Weight: approx. 720 kg Additional features and equipment: New 3-axis digital readout, coolant system, chuck guard, leadscrew and feed shaft covers, 2x emergency stop, operating manual, and much more on request... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can overhaul the selected machine completely or partially - On request, we can repaint the selected machine in your desired colour - On request, you can order further accessories such as tools directly - On request, we can install additional equipment such as safety devices - We are happy to assist with shipping and/or installation

Būklė: naujas, Bernardo Universal Lathe Solid 460 x 1000 Pro Centre Distance: 1000 mm Centre Height: 230 mm Swing Over Bed: 460 mm Swing Over Gap: 690 mm Swing Over Cross Slide: 270 mm Bed Width: 300 mm Spindle Bore: 80 mm Spindle Mount: DIN 55029, D1-8 Speed Range: (12) 25 - 1700 rpm Longitudinal Feed Range: (42) 0.055 - 3.065 mm/rev Cross Feed Range: (42) 0.025 - 1.386 mm/rev Metric Threads: (41) 0.1 - 14 mm Inch Threads: (60) 2 - 112 TPI Tailstock Quill Diameter: 60 mm Tailstock Quill Travel: 130 mm Tailstock Taper: MT 4 Motor Power: 5.5 kW (7.5 HP) Machine Dimensions (L x W x H): 2300 x 1080 x 1600 mm Weight approx.: 1675 kg Features • Modern main spindle bearings with precision angular contact ball bearings • Hardened and ground gears and shafts, including in the feed gearbox • Central, ergonomic control for feeds and threads with leadscrew and feed shaft Nodpfjqwkd Uox Apnedc • Large-dimensioned, hardened, and precision-ground gears • Simple, smooth and precise speed and feed selection • Standard with rapid traverse longitudinal and cross to reduce non-productive time • One-piece, heavily ribbed machine bed for maximum torsional rigidity and minimal vibration, ensuring high turning accuracy Scope of Delivery • 3-axis digital readout ES-12 V with LCD display • 3-jaw chuck PS3-250 mm / D8 • Face plate 450 mm • Coolant system • Initial fill with Shell Tellus 46 • Fixed steady rest – max. workpiece diameter 150 mm • Travelling steady rest – max. workpiece diameter 110 mm • Quick-change tool post with 4 tool holders • Safety cover for quick-change tool post • Motor with magnetic brake according to CE standard • Foot pedal with brake function according to CE • Slip clutch • Rapid traverse longitudinal and cross • Change gears • 2 live centers • Reducing sleeve • Thread dial indicator • LED machine lamp • Chip guard • Operating tools