Centro tekinimo staklės

WEILER Praktikant 160 B

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, veleno skylė: 40 mm, centro aukštis: 160 mm, plotis centre: 650 mm, plunksnos brūkšnys: 85 mm, bendras ilgis: 1 600 mm, bendras plotis: 900 mm, bendras aukštis: 1 500 mm, Dear Sir or Madam, We are offering for sale a Weiler Praktikant 160B lathe equipped with a 3-axis digital readout. The machine has been extensively partially overhauled in our workshop, and is therefore in excellent technical and optical condition. All guides are in good order, the gearboxes run quietly, and the levers can be operated smoothly. You are welcome to inspect the machine on-site to verify its condition. Nljdeu H U S Hopfx Aduei Availability: upon request Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill stroke: 85 mm Longitudinal feed range: 0.020 – 0.630 mm/rev Cross slide feed range: 0.006 – 0.200 mm/rev Thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Weight: approx. 720 kg Additional features and accessories: 3-axis digital readout, coolant system, chuck guard, jaw chuck, and further accessories available upon request... Our service commitment to you: - We are a certified master craftsman’s company specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can perform a full or partial overhaul of the selected machine - On request, we can repaint the selected machine in your preferred color - On request, you can order additional accessories such as tools directly - On request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation

Sąlyga: naudotas, Gamybos metai: 2014, Swing diameter over bed: 508 mm Turning length: 724.5 mm Control: Hurco Ultimax Nljdpfx Aev T Np Ajduji Swing diameter over cross slide: 336 mm Spindle speeds – stepless: 0–4500 rpm Spindle bore: 65 mm Feed rates: 0–30 m/min Rapid traverse in X and Z axis: 30 m/min Operating voltage: 400 V Connected load: 30 kVA Cross slide travel: 203.2 mm Longitudinal travel: 580/640 mm Space requirement approx.: 4.3 x 2.1 x 2.6 m Tool speeds: 0–5000 rpm Tool drive power: 5.5 kW Main spindle motor: 15/22 kW Machine weight approx.: 5.6 t C-axis: 360° x 0.001° increments Equipped with a 12-station turret with driven tool positions (C-axis), sub-spindle, power chuck, coolant system, and chip conveyor. Control: Hurco Ultimax. Supplied with extensive accessories.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Technical Specifications: >> Year of manufacture: 1986 >> Machine no.: 86-160-348 >> Centre height: 160 mm Nlodpfxjwthbij Aduji >> Centre distance: 650 mm >> Spindle speeds: 8 steps, from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5 with bayonet lock >> Tailstock: MK 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Possible threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 680 kg >> Spindle brake can be engaged >> Length: 1.6 m, height: 1.25 m, depth: 0.7 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200 tool memory, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> Collet chuck system, collets as-new from 1 to 29 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the Machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe with toolmaker precision, in very good condition. The machine is fully operational. The Weiler has been completely disassembled and newly repainted in light grey. The slides all move very smoothly and evenly. The Weiler also runs quietly at high speeds. This newer generation of Weiler lathes is extremely user-friendly and allows production of ground-like surface finishes. You are welcome to inspect the machine under power on site and convince yourself of its condition.

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, veleno skylė: 40 mm, centro aukštis: 160 mm, plotis centre: 650 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe equipped with a new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine undergoes comprehensive partial refurbishment in our workshop so that it is in excellent technical and optical condition. All guideways are in good order, the gearboxes run quietly, and the levers operate smoothly. You are welcome to inspect the machine on site and convince yourself of its condition. Availability: On request Centre height: 160 mm Nsdpswhzdmefx Aduoli Centre distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Longitudinal carriage feed range: 0.020 – 0.630 mm/rev Cross slide feed range: 0.006 – 0.200 mm/rev Thread cutting types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: Switchable Total connected load: 7.5 kVA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Weight: approx. 720 kg Additional features and equipment: New 3-axis digital readout, coolant system, chuck guard, leadscrew and feed shaft covers, 2x emergency stop, operating manual, and much more on request... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can overhaul the selected machine completely or partially - On request, we can repaint the selected machine in your desired colour - On request, you can order further accessories such as tools directly - On request, we can install additional equipment such as safety devices - We are happy to assist with shipping and/or installation

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, Ši mašina skirta įmonėms, ieškančioms paprasto ir patikimo pakavimo sprendimo. Maksimalus greitis siekia iki 1500 maišelių per valandą. Paprastas valdymas atliekamas dviem paprastais veiksmais: maišelio pripildymas iš viršaus ir jo uždarymas. Parduodami Autobag maišeliai šiose dydžiuose: 150x250 – 1,5 mln. maišelių 200x320 – 2,5 mln. maišelių Pilnos euro paletės kaina: 1 paletė – 0,025€ už maišelį Nedjr E Dpzjpfx Adueli 2 paletės – 0,019€ už maišelį 3 paletės – 0,018€ už maišelį 4 paletės – 0,017€ už maišelį 5 paletės – 0,016€ už maišelį ir t.t. 10 ir daugiau – 0,01€ už maišelį Nuo 1 mln. Autobag maišelių po 0,01€ už vienetą

Sąlyga: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis Digital Readout K&C NEW. Refurbished with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 87 160 760 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose, DIN 55027 Size 5 with Bayonet Lock >> Tailstock Taper: MK 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: Approx. 680 kg >> Spindle Brake, Switchable >> Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories & Equipment: >> 3-axis Digital Readout by K&C, new, 12 months manufacturer warranty, with instruction manual Functions: mm/inch switching, ABS/INC coordinate mode, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switching Nlodpovrdlcefx Aduei >> New collet chuck system; NEW collets from 3 to 25 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating instructions, spare parts list (PDF) About the Machine: This listing is for a Weiler Praktikant 160 B engine and feed shaft lathe, refurbished to toolmaker accuracy and fully geometrically overhauled. Supplied with inspection protocol for new machine tolerances. For safety: electronic working spindle guard, lead and feed shaft covers, two emergency stops, and a braked motor. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site to satisfy yourself of its condition.

Sąlyga: naujas, Saw blade diameter: 370 mm Cutting range at 90 degrees, round: 120 mm Cutting range at 90 degrees, square: 100 mm Cutting range at 90 degrees, rectangular: 180 x 100 mm Working height: 925 mm Nsdpfx Aed Iin Eoduoli Saw blade speeds: 17 - 70 rpm Total power requirement: 3.0 kW Machine weight approx.: t Space requirement approx.: 1.9 x 1.45 x 2.1 m SPECIAL OFFER PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic. (20195) · Miter cut left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, high-performance worm drive with large transmission ratio, integrated in a robust cast housing for optimal cutting results · Vise with double clamping arm, ensuring burr-free cuts and featuring quick lateral adjustment for miter changes · Precision prism guide for the gearbox head, laterally adjustable · Especially robust base frame with integrated automatic cooling system · Large chip drawer · Chip removal brush integrated in the saw blade guard CNC control: · Button-operated with over 90 different sawing programs, each with up to 99 subprograms for length, quantity, and angle · Automatic feed unit, 2,000 mm via ball screw, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Preselection of 3 different material feed speeds · Visualization of the entire workflow with simple data input PLEASE NOTE: Price does not include saw blade! (Saw blade price: €204)

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Travel paths X/Y/Z: 900 x 400 x 200 mm Nedpov Irwrsfx Aduoli Table size: 800 x 400 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Turning-milling center Takisawa TMM 250 3, year 2016, Fanuc Nedpfort Ip Njx Adueli Turning length: 1300 mm Turning diameter: 350 mm Max. spindle speed: 4000 rpm 9 axes 2 x spindles 2 x C-axis Swing diameter: 780 mm Max. turning diameter: 350 mm Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Upper tool turret with Y-axis (260 mm travel) and B-axis (230° / +/- 115°) Complete with 30-station tool changer Lower tool turret: 15-position turret – all positions driven Full simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool stations Workpiece magazine, right side of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to high administrative expense (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Sąlyga: geras (naudotas), Gamybos metai: 1988, 1 naudota vedimoji ir traukimosi verpstės tekinimo staklė Gamintojas: Weiler Tipas: 160 B Metai: 1988 Techniniai duomenys Atstumas tarp centrų: 650 mm Sukimosi skersmuo virš lovos: 320 mm Sukimosi skersmuo virš išilginio slankiklio: 192 mm Centro aukštis: 160 mm Verpstės anga: 40 mm Nominali galia: 2,4 / 3 kW Sukimosi greitis: 48 – 2500 aps./min. Matmenys: apie I 2,20 x P 1,10 x A 1,40 m Svoris: apie 1 t Nlsdpfsw Sdr Hjx Adusi Priedai Heidenhain skaitmeninis indikatorius Multifix laikiklis su įvairiais įdėklais 3 žandikaulių tvirtinimo skriemulys Avarinio stabdymo mygtukas