Centro tekinimo staklės

WEILER Praktikant 160 B - Teilüberholt

Sąlyga: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, veleno skylė: 40 mm, centro aukštis: 160 mm, plotis centre: 650 mm, plunksnos brūkšnys: 85 mm, bendras ilgis: 1 600 mm, bendras plotis: 900 mm, bendras aukštis: 1 500 mm, Dear Sir or Madam, We are offering for sale a Weiler Praktikant 160B lathe equipped with a 3-axis digital readout. The machine has been extensively partially overhauled in our workshop, and is therefore in excellent technical and optical condition. All guides are in good order, the gearboxes run quietly, and the levers can be operated smoothly. You are welcome to inspect the machine on-site to verify its condition. Availability: upon request Centre height: 160 mm Nlodpfx Adou H U S Heusi Centre distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper: MT3 Quill stroke: 85 mm Longitudinal feed range: 0.020 – 0.630 mm/rev Cross slide feed range: 0.006 – 0.200 mm/rev Thread types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: switchable Total connected load: 7.5 kVA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Weight: approx. 720 kg Additional features and accessories: 3-axis digital readout, coolant system, chuck guard, jaw chuck, and further accessories available upon request... Our service commitment to you: - We are a certified master craftsman’s company specializing in mechanical engineering - All machines are thoroughly inspected - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can perform a full or partial overhaul of the selected machine - On request, we can repaint the selected machine in your preferred color - On request, you can order additional accessories such as tools directly - On request, we can install additional accessories such as safety devices, etc. - We are happy to take care of shipping and/or installation

Sąlyga: naudotas, Gamybos metai: 2014, Swing diameter over bed: 508 mm Turning length: 724.5 mm Control: Hurco Ultimax Swing diameter over cross slide: 336 mm Spindle speeds – stepless: 0–4500 rpm Spindle bore: 65 mm Feed rates: 0–30 m/min Rapid traverse in X and Z axis: 30 m/min Operating voltage: 400 V Connected load: 30 kVA Cross slide travel: 203.2 mm Longitudinal travel: 580/640 mm Space requirement approx.: 4.3 x 2.1 x 2.6 m Tool speeds: 0–5000 rpm Tool drive power: 5.5 kW Nsdpfxsv T Np Ao Adueli Main spindle motor: 15/22 kW Machine weight approx.: 5.6 t C-axis: 360° x 0.001° increments Equipped with a 12-station turret with driven tool positions (C-axis), sub-spindle, power chuck, coolant system, and chip conveyor. Control: Hurco Ultimax. Supplied with extensive accessories.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 1986, Funkcionalumas: visiškai funkcionalus, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout K&C NEW Technical Specifications: >> Year of manufacture: 1986 >> Machine no.: 86-160-348 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: 8 steps, from 96 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027, size 5 with bayonet lock >> Tailstock: MK 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Possible threads: metric, imperial, module and diametral pitch >> Metric thread pitches from 0.25 to 8 mm >> Weight: approx. 680 kg Nlodpowthbijfx Adusi >> Spindle brake can be engaged >> Length: 1.6 m, height: 1.25 m, depth: 0.7 m Accessories and Equipment: >> 3-axis digital readout from K&C, new, 12-month manufacturer's warranty with user manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, 200 tool memory, taper calculation, radius/diameter display, quick zeroing, counting direction reversal >> Collet chuck system, collets as-new from 1 to 29 mm in 1 mm increments >> New 160 mm 3-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electric chuck guard >> Bed stop >> Rear splash guard >> Machine feet >> Coolant system About the Machine: Offered is a Weiler Praktikant 160 B lead and feed screw lathe with toolmaker precision, in very good condition. The machine is fully operational. The Weiler has been completely disassembled and newly repainted in light grey. The slides all move very smoothly and evenly. The Weiler also runs quietly at high speeds. This newer generation of Weiler lathes is extremely user-friendly and allows production of ground-like surface finishes. You are welcome to inspect the machine under power on site and convince yourself of its condition.

Sąlyga: beveik kaip naujas (naudotas), Gamybos metai: 2023, Ši mašina skirta įmonėms, ieškančioms paprasto ir patikimo pakavimo sprendimo. Maksimalus greitis siekia iki 1500 maišelių per valandą. Paprastas valdymas atliekamas dviem paprastais veiksmais: maišelio pripildymas iš viršaus ir jo uždarymas. Parduodami Autobag maišeliai šiose dydžiuose: 150x250 – 1,5 mln. maišelių 200x320 – 2,5 mln. maišelių Pilnos euro paletės kaina: 1 paletė – 0,025€ už maišelį 2 paletės – 0,019€ už maišelį Noder E Dpzepfx Aduoli 3 paletės – 0,018€ už maišelį 4 paletės – 0,017€ už maišelį 5 paletės – 0,016€ už maišelį ir t.t. 10 ir daugiau – 0,01€ už maišelį Nuo 1 mln. Autobag maišelių po 0,01€ už vienetą

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2008, Travel paths X/Y/Z: 900 x 400 x 200 mm Nlodpfxsv Irwrs Aduoi Table size: 800 x 400 mm

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2016, Turning-milling center Takisawa TMM 250 3, year 2016, Fanuc Turning length: 1300 mm Turning diameter: 350 mm Max. spindle speed: 4000 rpm 9 axes 2 x spindles 2 x C-axis Nljdpfx Asrt Ip Nedusi Swing diameter: 780 mm Max. turning diameter: 350 mm Max. turning length: 1,300 mm Chuck diameter left: 250 mm Chuck diameter right: 200 mm Upper tool turret with Y-axis (260 mm travel) and B-axis (230° / +/- 115°) Complete with 30-station tool changer Lower tool turret: 15-position turret – all positions driven Full simultaneous 5-axis machining with turning/milling support. Tool changer with 30 tool stations Workpiece magazine, right side of the machine, with gantry handling Driven tools on the turret. C-axis for left and right spindle Chip conveyor Internal coolant supply through milling spindle, 20 bar Due to high administrative expense (customs regulations), we do not deliver to Turkey, Iran, Russia, or Belarus.

Sąlyga: labai geros būklės (naudotas), Gamybos metai: 2006, Working length: 3100 mm Cutting capacity: 6 mm Backgauge range: 750 mm Equipped with: - 3 sheet metal support arms - Rear access safety guard Nledpfx Aon Smtqjdusi - Foot pedal Motor power: 11 kW Machine dimensions (LxWxH): 3750 x 2350 x 1850 mm Machine weight: 5500 kg

Sąlyga: labai geros būklės (naudotas), Brand: KENT Model: KGS-250AHD Type: Tangential Working surface: 460 x 200 mm Longitudinal travel: 540 mm Cross travel: 260 mm Distance from spindle centre to table: 490 mm Maximum load on table including magnetic chuck: - 250 series: 103 kg Nodpfsh Ha Ipox Adueli - 818 series: 150 kg T-slot: 14 x 1 mm/N Table longitudinal speed: 5–23 m/min Cross feed handwheel: 1 division = 0.02 mm, 1 revolution = 4 mm Automatic cross feed per stroke: 0.1–5.5 mm Automatic feed: - 50 Hz: 820 mm/min - 60 Hz: 980 mm/min Grinding wheel size: 180 x 13 x 31.75 mm Spindle speed: - 50 Hz: 2850 rpm - 60 Hz: 3480 rpm Vertical handwheel: 1 division = 0.01 mm, 1 revolution = 2 mm Automatic downfeed increment: 0.002–0.02 mm Spindle motor: 2 x 2 HP (XP) Elevation motor: Not applicable Hydraulic pump motor: 1 x 6 HP (XP) Coolant motor: 1/8 x 2 HP (XP) Cross feed motor: 1/5 x 6 HP (XP) Machine height: 1775 mm Machine dimensions: 3260 x 2460 mm Net weight: 1300 kg Gross weight: 1500 kg

Sąlyga: naudotas, Gamybos metai: 1959, Swing diameter over bed: 380 mm Swing diameter over slide: 215 mm Turning length: 1000 mm Machine weight approx. 1800 kg Space requirement approx. 2.7 x 1.2 x 1 m The L&Z lathe is in good condition. Scope of delivery includes extensive accessories and cabinets: - 3-jaw chuck - 4-jaw face plate Nlsdpsvwgmajfx Aduoi - Steady rest

Sąlyga: geras (naudotas), Gamybos metai: 2008, šlifavimo ilgis: 1 250 mm, stalo ilgis: 1 250 mm, stalo apkrova: 1 200 kg, stalo plotis: 500 mm, veleno greitis (maks.): 2 600 aps./min, veleno greitis (min.): 1 000 aps./min, bendras svoris: 9 300 kg, X ašies eiga: 1 400 mm, Y ašies eiga: 600 mm, Z ašies eigos atstumas: 600 mm, galia: 185 kW (251,53 AG), įėjimo įtampa: 400 V, reikalingas aukštis: 2 870 mm, Įranga: sūkių greitis be galo kintamas, X-axis: Grinding length 1,250 mm, travel distance 1,400 mm Y-axis: Distance table to spindle center 700 mm, travel distance 600 mm Z-axis: Grinding width see note, travel distance 600 mm Note: The grinding area in the transverse direction (Z-axis) depends on the travel distance and the grinding wheel width. Nledeu Hiq Rspfx Adusi Example: Transverse travel = 600 mm Grinding wheel width 60 mm = grinding width 660 mm Grinding wheel width 100 mm = grinding width 700 mm See pictures for more technical data