Meuser Centro Tekinimo Staklės pirkti naudotą (51 142)

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Kjdpfx Agou Aftgegodu Technical Data: >> Year of manufacture: approx. 1985 >> Center height: 120 mm >> Distance between centers: 430 mm >> Spindle speeds: 60 - 3000 rpm, 18 geared steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: Morse Taper 2 (MT 2) >> Feeds: 0.03 to 0.15 mm/rev >> Available threads: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches: 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Dimensions: Length 1.2 m, Height 1.3 m, Depth 0.65 m Accessories and equipment: >> 1 piece 160 mm 3-jaw chuck with 1 set of jaws >> 1 piece new 125 mm 3-jaw chuck with 2 sets of jaws >> Collet attachment with collets from 1 mm to 20 mm in 1 mm increments >> Multifix size A quick-change tool post with 3 holders >> Stop >> Change gears About the machine: Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All slides move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is highly user-friendly and can produce surface finishes comparable to grinding. You are welcome to inspect the machine under power on site to verify its condition.

Būklė: geras (naudotas), Gamybos metai: 2010, Centre Lathe Manufacturer: JET Type: GHB-1330 Year: 2010 Equipped with 3-axis digital readout, 3-jaw chuck Ø 160 mm, Multifix toolholder size A, 2 steadies, and coolant system. Swing over bed: 330 mm Swing over cross slide: 197 mm Centre distance: 750 mm Spindle speeds: 70–2000 rpm Kdsdpfxoqwgzqo Aggou Spindle bore: 38 mm Machine in good condition, from a training workshop. Machine documentation available.

Būklė: naudotas, Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Weiler / Contec (licencinė gamyba) Matador tekinimo staklės, pagaminimo metai 1993, su 3 ašių Elesta skaitmenine indikacija, keturių žandikaulių griebtuvu, Multifix, galiniu purškimo apsauginiu, elektrine griebtuvo apsauga. Staklės geros, paruoštos naudoti būklės, pagal susitarimą galima parodyti veikiančias. Kodpfx Agjxp Rvlegsdu

Būklė: naudotas, Gamybos metai: 1993, Funkcionalumas: visiškai funkcionalus, Weiler / Contec (licencinė gamyba) Matador tekinimo staklės, pagaminimo metai 1993, su 3 ašių Elesta skaitmenine indikacija, keturių žandikaulių griebtuvu, Multifix, galiniu purškimo apsauginiu, elektrine griebtuvo apsauga. Staklės geros, paruoštos naudoti būklės, pagal susitarimą galima parodyti veikiančias. Kdjdexp Ru Uopfx Aggju

Būklė: labai geros būklės (naudotas), Leadscrew and feed shaft lathe Spindle bore: 76 mm Center height: 220 mm Turning length: 3,00 m Multifix tool post with 5 cassettes Coolant system Kodpova Ef Tjfx Aggodu Operating manual

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2015, veleno skylė: 105 mm, tekėjimo skersmuo: 710 mm, centro aukštis: 355 mm, tekėjimo ilgis: 1 500 mm, Tekinimo diametras tarpe: 960 mm, SN 710S x 1500 Pagaminimo metai: 2015 Kjdpfevq Ibxex Aggodu Acu Rite skaitmeninis ekranas Mašinos lempa Aušinimo skysčio bakas Išilginis ribotuvas Nugarinis drožlių apsaugas Griebtuvo apsauga

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Praktikant 160B Precision Centre Lathe with 3-Axis Digital Readout K&C NEW. Refurbished with Inspection Protocol for New Machine Tolerances Technical Data: >> Machine No.: 87 160 760 >> Centre Height: 160 mm >> Centre Distance: 650 mm >> Spindle Speeds: 24 to 2500 rpm >> Spindle Bore: 40 mm >> Short Taper Spindle Nose, DIN 55027 Size 5 with Bayonet Lock >> Tailstock Taper: MK 3 >> Feeds: 0.02 to 0.63 mm/rev >> Thread Types: Metric, Imperial, Module, and Diametral Pitch >> Metric Thread Pitches: 0.25 to 8 mm >> Weight: Approx. 680 kg >> Spindle Brake, Switchable >> Dimensions: Length 1.6 m, Height 1.25 m, Depth 0.7 m Kjdpfx Agevrdlcogjdu Accessories & Equipment: >> 3-axis Digital Readout by K&C, new, 12 months manufacturer warranty, with instruction manual Functions: mm/inch switching, ABS/INC coordinate mode, value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction switching >> New collet chuck system; NEW collets from 3 to 25 mm in 1 mm increments >> New 160 mm three-jaw chuck with 2 sets of jaws >> Multifix size A with 3 tool holders >> Electronic spindle guard >> NEW LED machine lamp >> NEW machine mounts >> Splash guard >> Operating instructions, spare parts list (PDF) About the Machine: This listing is for a Weiler Praktikant 160 B engine and feed shaft lathe, refurbished to toolmaker accuracy and fully geometrically overhauled. Supplied with inspection protocol for new machine tolerances. For safety: electronic working spindle guard, lead and feed shaft covers, two emergency stops, and a braked motor. This newer generation of Weiler lathes is very user-friendly and capable of producing ground-like surface finishes. You are welcome to inspect the machine under power on-site to satisfy yourself of its condition.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus Lead and Feed Screw Lathe from Training Workshop!!! Technical Data: >> Year of manufacture: approx. 1985, Machine No. 1191 >> Centre height: 120 mm >> Centre distance: 430 mm >> Speed range: 60 - 3,000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose KK4 DIN 55027 >> Tailstock: MT2 >> Feeds from 0.03 to 0.15 mm/rev >> Thread cutting: Metric, Imperial, Module, and Diametral Pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Weight: approx. 360 kg >> Length: 1.2 m, Height: 1.3 m, Depth: 0.65 m Equipment and Accessories: >> 1 pc. 3-jaw chuck 125 mm with 2 sets of jaws Kdodpfxovtp Edj Aggsu >> Collet chuck with 18 collets >> Multifix size A with 3 tool holders >> Stop >> Electric spindle guard About the Machine: Offered is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all move very smoothly and evenly. The Weiler also runs quietly at high speeds. The Primus was located in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows for the production of ground-like surface finishes. Take the opportunity to view this machine under power on-site and see its condition for yourself.

Būklė: geras (naudotas), Gamybos metai: 1972, LZ tekinimo staklės Gamintojas: HEIDENREICH & HERBECK, modelis: 21RO, pagamintos 1972 m. Su greito keitimo laikikliu Parat, 10 vnt., staklių dokumentacija, sriegių rodyklė, konuso centras, Forkardt 250 mm griebtuvas. Didžiausias tekinimo diametras virš lovio: 430 mm Didžiausias tekinimo diametras virš atramos: 255 mm Centro atstumas: 1000 mm Tekinimo ilgis: 750 mm Velieno apsisukimų skaičius: 19-2000 aps./min., 5,5 kW variklis Velieno anga: 56 mm Kdodpfx Agjt Ipi Iogou Kiti duomenys žr. duomenų lape Užimamas plotas: ilgis 2900 mm, plotis 1100 mm, aukštis 1300 mm, svoris apie 1750 kg. Prieinami staklių dokumentai. Yra aušinimo įranga, drožlių atitvaras. Staklės geros būklės, galima parodyti su įjungta elektra.

Būklė: visiškai atnaujintas (naudotas), Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, veleno skylė: 95 mm, tekėjimo skersmuo: 800 mm, tekinimo skersmuo virš slankiojančio stalo: 800 mm, tekinimo skersmuo virš viršutinio vežimo: 530 mm, tekėjimo ilgis: 3 000 mm, The PORĘBA TPK-80/3M universal lathe has been extensively rebuilt and modernized by us. It features technical parameters that correspond to the specifications and operational documentation of a new machine, meets the technical acceptance standards of WOT and Polish norms, and also complies with EU requirements. The machine comes with a full 12-month warranty on spare parts and electrical components. Availability: in stock, powered up, available for inspection at any time Technical Specifications: - Distance between centers/turning length: 3000 mm Kdedpfxofknw Rs Aggju - Swing over bed: 800 mm - Swing over cross slide: 530 mm - Swing in gap: 1080 mm - Spindle bore: 95 mm - Maximum workpiece weight between centers: 6,000 kg - Maximum workpiece weight between centers + 1 steady rest: 7,500 kg - Maximum workpiece weight between centers + 2 steady rests: 9,000 kg - Number of spindle speeds: 21 - Speed range (rpm): 8 - 800 - Number of feeds: 80 - Feed range (mm/rev): Longitudinal: 0.1 – 12.8 Cross: 0.05 – 6.4 - Motor power: 16/22 kW (1st gear / 2nd gear) - Overall dimensions: - Overall length: 5,000 mm - Width: 1,800 mm - Height: 1,800 mm - Total weight: 6,200 kg Standard equipment: tailstock, coolant pump, chuck guard, tool holder Additional equipment available at extra cost: - 3- or 4-jaw chuck, various diameters and types - Digital readout for 2 axes, including display, installation, and calibration - Steady rest 40–400 mm, with rollers - Steady rest 400–600 mm, with rollers - MULTIFIX quick-change tool post

Būklė: beveik kaip naujas (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Display, NEWLY Refurbished with Inspection Report for New Machine Tolerances Technical Specifications: >> Machine No. 2020 >> Centre Height: 180 mm >> Centre Distance: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Size 5 >> Tailstock Morse Taper 4 >> Feeds: from 0.026 to 0.888 mm/rev >> Thread cutting possible: Metric, Inch, Module and Diametral Pitch >> Metric Thread Pitch: from 0.35 to 12 mm >> Weight approx. 1500 kg >> Spindle brake switchable >> Motor Power: 2.0/4.0 kW >> Dimensions: Length 2.2 m, Height 1.5 m, Depth 1 m Accessories and Equipment: >> 3-axis K&C Digital Readout, new, 12 months manufacturer's warranty with user manual Functions: mm/inch selection, coordinate choice ABS/INC, display value halving, reference mark, tool programming for 200 tools, taper calculation, radius/diameter display, quick zeroing, count direction switching >> 200 mm wedge-bar 3-jaw chuck, nearly new, 1 set of jaws >> Multifix size B with 2 new tool holders >> Bed stop >> Machine feet >> Coolant device >> LED machine lamp For safety the machine is equipped with: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops On request: Covers for lead and feed screws About the Machine: Kodpfx Agsvrckqegedu Offered is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The guideways have been newly ground and scraped. Delivery includes an acceptance report according to inspection protocol. Coated with high-gloss 2K white paint. The Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs extremely smoothly. This latest generation of Weiler lathes is especially user-friendly and allows the production of ground-like finishes. You are welcome to inspect the machine under power on site to convince yourself of its condition.

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, Weiler Primus LZ/G Lead and Feed Screw Lathe in Special Light Grey Paint Finish!!! Technical Data: >> Year of manufacture: approx. 1990, Machine No. 3150 >> Centre height: 120 mm >> Centre distance: 430 mm >> Spindle speed: 60 - 3000 rpm in 18 gear steps >> Spindle bore: 23 mm >> Short taper spindle nose DIN 4 >> Tailstock: Morse taper 2 >> Feeds from 0.03 to 0.15 mm/rev >> Possible threads: metric, inch, module, and diametral pitch >> Metric thread pitches from 0.25 to 2.5 mm >> Switchable spindle brake >> Weight: approx. 360 kg >> Length 1.2 m, height 1.3 m, depth 0.65 m Accessories and Equipment: >> 1 piece three-jaw chuck NEW 125mm with 2 sets of jaws >> Multifix size A with 2 tool holders >> New collet chuck system with collets from 3 to 26 mm in 1 mm steps, new About the machine: Kodpfx Agevivmysgsdu Offered here is a Weiler Primus lead and feed screw lathe in very good condition. The machine is, of course, fully functional. All carriages move smoothly and evenly. The bedways are in very good condition. The Primus was used in a training workshop. This newer generation of Weiler lathes is very user-friendly and allows surfaces to be produced to a near-ground finish. Take the opportunity to inspect this machine under power on site and see the condition for yourself.

Būklė: geras (naudotas), Gamybos metai: 2004, Multipurpose Lathe ELBERON Type: GRC300X750 Chuck: 130 mm In good condition. Kdodpfx Agewah Rqsgju For technical data, please refer to the data sheets.

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, sukimosi skersmuo virš skersinio stumduko: 660 mm, tekinimo skersmuo virš slankiojančio stalo: 900 mm, tekėjimo ilgis: 2 000 mm, veleno greitis (maks.): 710 aps./min, bendras svoris: 7 000 kg, Poreba TPK 90A1/2M Futterdurchmesser: 800 mm Spitzenweite: 2.000 mm Kodpewbd Dvjfx Aggodu Umlaufdurchmesser über Bett: 900 mm Umlaufdurchmesser über Support: 660 mm Spindeldrehzahl: 710 min⁻¹ Gewicht: ca. 7.000 kg

Būklė: beveik kaip naujas (naudotas), Gamybos metai: 2023, Funkcionalumas: visiškai funkcionalus, Fixed steady rest with roller-type centering pins for SUI 80 TRENCIN Capacity: 210 - 370 mm 365 - 520 mm Kjdju Tvdbopfx Aggodu Available only as a set

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1989, Universal lead and feed screw lathe Brand: WEILER Model: Condor B Kdjdpfx Ageg R S Rcsgsu Year of manufacture: 1989 - overhauled newly painted RAL 7035 light grey Machine No.: 1401 with warranty Accessories: - 3-axis digital readout FAGOR Innova 30i T, new - Chuck guard with electric interlock, new - Size B quick-change toolpost base - Bed stop - Coolant system - Chip guard/rear panel - Operating manual - used, as seen -

Būklė: labai geros būklės (naudotas), Tacchi HD/1450 – 725 x 4000 mm CNC tekinimo staklės (2012 m.) Serijos numeris: 7264 Metai: 2012 Valdymas: Fanuc OiTD CNC Būklė: Naudotos – geros darbinės būklės Techninės specifikacijos: Centro aukštis: 725 mm Sūkurio skersmuo virš lovos: 1450 mm Sūkurio skersmuo virš skersinio stalo: 1000 mm Atstumas tarp centrų: 4000 mm Pagrindinis variklis: 60 kW Didžiausias svoris tarp centrų (be atramos): 15 000 kg Veleno apsukų diapazonas: 1,9 – 560 aps./min. Kjdpjxc In Ssfx Aggsdu Ypatybės ir įranga: 2 x 3 taškų centravimo atramos Rankinis ratukas Drožlių transporterio sistema 4 pozicijų hidraulinė įrankių galvutė 4-griebtų spaustuvas Fanuc OiTD CNC valdymas

Būklė: naudotas, Gamybos metai: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH, traces of use present - Hardened and ground Z-axis guideways - Spindle mount Camlock DIN ISO 702-2 No. 8 - Precisely machined carriage - Handwheels with adjustable fine scaling 0.04 / 0.02 mm - All guides adjustable via gib strips - Shafts, gears, and main spindle running in oil bath - Cross-slide adjustment range ± 90° - Guaranteed spindle nose run-out accuracy better than 0.015 mm - Easy-running, hardened and ground gearbox gears mounted in 2 adjustable precision taper roller bearings - Clearly arranged selection levers for feed speed adjustment - Enclosed design of the quick-shift feed gearbox - Gears and shafts hardened and ground, running in precision bearings in an oil bath - Switch with life-cycle calculation, tested according to EN ISO 13849 - Bed carriage forward/reverse operation switchable via control spindle - Central lubrication in bed carriage - Leadscrew cover - Emergency stop impact switch, motor protection switch, lockable main switch - Tailstock quill and handwheel with adjustable fine scaling 0.025 mm - Quick, easy, and tool-free adjustment via clamping lever - Heavily ribbed prism bed, induction hardened and precision ground, made from cast iron - Coolant system with separate coolant tank featuring fill level indicator and oil separator; easy and complete draining and cleaning per DIN - LED machine lamp in chip guard - Two gearbox speed ranges - Spindle bore / bar capacity Ø 105 mm - Siemens Sinamics frequency inverter / Safety Integrated - Energy chain for protective cable and hose routing - Thread dial indicator scale adjustable - Quick-change tool post SWH 7-C - 1 tool holder 32 x 150 type D for 25 mm square tool bits - Digital position display DPA 21 - Glass scales Kdjdpfx Asx Dzxaeggsu Dimensions and weights Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working ranges Centre height: 280 mm Centre distance: 1910 mm Swing diameter over bed: 560 mm Swing diameter in bed gap: 790 mm Swing diameter over cross-slide: 355 mm Turning length in bed gap: 170 mm Bed width: 350 mm Speed range Number of speed ranges: 2 Speed range: 25 – 1600 rpm Spindle speed control: electronically adjustable Electrical data Output power (motor): 7.5 kW Total connected load: 8.5 kW Connection voltage: 400 V Network frequency: 50 Hz Coolant system Coolant pump power: 125 W Standards and approvals Standard: DIN EN 55011 Tailstock Quill taper: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Tool post mounting height max.: 25 mm Spindle taper: Ø 113 (taper 1:20) mm Thread cutting Metric pitch: 0.1 - 14 mm/rev Number of metric pitches: 47 Inch pitch: 112 - 2 TPI Number of inch pitches: 60 Diametral pitch: 4 – 112 DP Number of diametral pitches: 50 Module thread pitch: 0.1 - 7 mm/rev Number of module thread pitches: 34 Travels Compound slide travel: 130 mm Cross-slide travel: 316 mm Bed carriage travel: 1710 mm Feed range Longitudinal feed: 0.031 - 1.7 mm/rev Number of longitudinal feeds: 42 Plan feed range: 0.014 - 0.784 mm/rev Number of plan feeds: 42

Būklė: naujas, Gamybos metai: 2024, Neue Maschine Umlaufdurchmesser über Bett: 500 mm Umlaufdurchmesser über Support: 270 mm Umlaufdurchmesser im Bettspalt: 700 mm Bettbreite: 340 mm Spitzenweite: 1.500 mm Spitzenhöhe: 250 mm Drehzahlbereich: 22 – 2.000 U/min Ksdpfxowu Du Ie Aggjdu Spindelaufnahme: Bajonett 6 Spindeldurchlass: 52 mm Inklusive: 3-Backenfutter, 4-Backenfutter, Schnellwechselstahlhalter mit 4 Einsätzen, Schnellvorschub, Kühlmitteleinrichtung, 2-Achsen-Digitalanzeige, feste Lünette, Mitlaufende Lünette, Wechselradsatz und Bedienungsanleitung

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, veleno skylė: 40 mm, centro aukštis: 160 mm, plotis centre: 650 mm, Dear Sir or Madam, For sale is a Weiler Praktikant 160B lathe equipped with a new 3-axis digital readout from K+C (including a 12-month manufacturer's warranty). The machine undergoes comprehensive partial refurbishment in our workshop so that it is in excellent technical and optical condition. All guideways are in good order, the gearboxes run quietly, and the levers operate smoothly. You are welcome to inspect the machine on site and convince yourself of its condition. Availability: On request Centre height: 160 mm Centre distance: 650 mm Spindle bore: Ø 40 mm Tailstock taper: MK3 Quill stroke: 85 mm Longitudinal carriage feed range: 0.020 – 0.630 mm/rev Cross slide feed range: 0.006 – 0.200 mm/rev Thread cutting types: Metric, Inch, Module, Diametral Pitch Metric thread pitches: 0.25 – 8 mm Spindle brake: Switchable Total connected load: 7.5 kVA Voltage: 400V Dimensions: approx. 1.58 x 0.9 x 1.5 m (L x H x W) Weight: approx. 720 kg Additional features and equipment: New 3-axis digital readout, coolant system, chuck guard, leadscrew and feed shaft covers, 2x emergency stop, operating manual, and much more on request... Our service promise to you: - We are a certified master workshop in mechanical engineering - All machines are thoroughly checked - All lubricants and, if necessary, worn parts are replaced in advance - On request, we can overhaul the selected machine completely or partially - On request, we can repaint the selected machine in your desired colour - On request, you can order further accessories such as tools directly - On request, we can install additional equipment such as safety devices - We are happy to assist with shipping and/or installation Kodpfewhzdmjx Aggsdu

Būklė: dilaminuotas dirbtuvėje (naudotas), Gamybos metai: 1990, Universal lead- and feed-screw lathe Manufacturer: WEILER Model: Praktikant 160 B Year of manufacture: 1990 – overhauled Newly painted RAL 7035 light grey Machine no.: 90-160-2054 Center height: 160 mm Distance between centers: 650 mm Geometric acceptance with test protocol Accessories: - 3-axis digital readout FAGOR Innova 30i T - Covered lead and feed screw - Braked drive motor - Coolant system - Electrically interlocked chuck guard - Size A quick-change toolholder - Simple bed stop - Chip guard rear wall - Operating instructions Ksdpjhy Tdyjfx Aggedu With warranty Used, as seen The machine is technically at the level of its year of manufacture.

Būklė: naudotas, Gamybos metai: 1979, Funkcionalumas: visiškai funkcionalus, tekėjimo skersmuo: 640 mm, centro aukštis: 320 mm, tekėjimo ilgis: 2 000 mm, VDF pavaros ir tempiamosios tekinimo staklės su skaitmeniniu indikatoriumi, varomas viršutinis skersinis, 3 ašių pastūmos sistema su greita eiga, 3 žandų tekė, plokštuma, Multifix įrankių laikiklis su 5 antgaliais. Kdedpfsxz Edzsx Aggsu

Būklė: naudotas, Hydraulic self-centering steady rest, Lünette, Lynette SMW AUTOBLOK Hydraulic steady rest with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Steady rest base: 245 x 240 mm Design: fixed - 3 pcs. roller bearings Ø 35 mm - Roller width: 18 mm - hydraulic self-centering Dimensions (L x W x H): 350 x 250 x 550 mm Net weight: 65 kg Good condition Kdsdpeiv Irlofx Aggou

Būklė: labai geros būklės (naudotas), Funkcionalumas: visiškai funkcionalus, High-Precision Lead and Feed Screw Lathe Model B30 LZS with Accessory Cabinet and 3-Axis Digital Readout Fagor from UNI Technical Data: >> Centre Height: 120 mm >> Centre Distance: 560 mm >> Spindle Bore: 30 mm >> Max. Swing Diameter: 250 mm >> Longitudinal Feeds, Facing Feeds >> Thread Cutting: metric, module, inch >> Stepless Speeds from 30–3000 rpm Kedsxyh Ndepfx Aggsdu Accessories: 3-Axis Digital Readout Fagor Tool Cabinet including: >> 3-jaw chuck >> 4-jaw chuck >> Tool holder >> Drill chuck; live center >> Collet system with collets >> Fixed and travelling steadies >> Machine mounts >> and much more About the Machine: For sale is a Lorch high-precision lead and feed screw lathe in very good condition. The machine is, of course, fully functional. The slides all move smoothly and evenly. Even at high speeds, the Lorch runs quietly. Equipped with a Fagor 3-axis digital readout and many accessories. The machine was previously located at a university. Take advantage of the opportunity to inspect the machine under power on site and see the excellent condition for yourself.

Būklė: geras (naudotas), Gamybos metai: 1967, LZ lathe, manufacturer WEIPERT, TYPE: UD 500 e, year 1967, equipped with digital readout, top slide feed, MULTIFIX tool post size C, Forkardt chuck 315 mm. Kdsdeu Rd H Ispfx Aggou Centre height: 250 mm Centre distance: 1500 mm Spindle bore: 65 mm Spindle speeds: 14 – 1400 rpm The machine is in good condition.