Humus Ph1350 pirkti naudotą (81)

Būklė: naudotas, Gamybos metai: 2023, keliamoji galia: 4 990 kg, kėlimo aukštis: 4 700 mm, šakių ilgis: 1 600 mm, bendras ilgis: 4 470 mm, - Operation: Seated driver - Load centre distance mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 - Tyres: Superelastic - Track width front/rear mm: 1,104 / 932 - Mast tilt angle forward/backward α/β °: 7 / 5 - Seat height (relative to SIP, low version) mm: 1,342 - Working aisle width with pallet 1000 x 1200 crosswise mm: 4,370 - Working aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm - Smallest pivot point distance: 729 mm - Travel speed with load km/h: 20 - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard Performance) with load: 0.39 / 0.31 m/s - Lifting speed without load m/s: 0.45 - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 - Tractive force with load N: 6,750 - Tractive force without load N: 7,430 - Max. tractive force (Plus//Standard Performance) with load N: 22,590 / 19,000 - Max. tractive force (Plus//Standard Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 - Max. gradeability (Plus//Standard Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard Performance) with load sec: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard Performance) without load sec: 5.7 / 6.2 - Service brake: Hydraulically actuated wet multi-disc brake - Battery voltage V: 80 - Handling capacity (Plus//Standard Performance) t/h: 324 / 315 - Working hydraulic pressure for attachments bar: 250 - Hydraulic oil flow for attachments l: 50 - Sound pressure level (operator's position) dB(A): 66 - Human vibration: acceleration according to EN 13059 m/s²: 0.42 - Tow hitch, type: Pin Nlodpfxsy E Udnj Afaoc

Būklė: naudotas, Gamybos metai: 2016, keliamoji galia: 4 500 kg, kėlimo aukštis: 7 000 mm, bendras ilgis: 5 400 mm, Drive: Electric Operation: Rider-seated Load capacity: 4500 kg Load center: 600 mm Njdpoy E Udbofx Afaslc Load distance: 525 mm Wheels, number (x = driven): 2x/2 Track width front/rear: 1104/920 mm Mast tilt forward/backward: 7/7 degrees Mast height lowered/extended (mm): 2300/3987 Height over protective roof (low version) (mm): 2333 (2243) Seat height relative to SIP (low version) (mm): 1342 Coupling height (mm): 540/415 Aisle width for pallet 1000 x 1200 across (mm): 4275 Aisle width for pallet 800 x 1200 lengthwise (mm): 4475 Turning radius (mm): 2550 Smallest pivot point distance: 725 mm Travel speed with load (km/h): 20 Travel speed without load (km/h): 20 Lifting speed without load (m/s): 0.45 Lowering speed with load (m/s): 0.5 Lowering speed without load (m/s): 0.5 Lift motor power at 15% duty cycle (kW): 25 Battery voltage (V): 80 Battery capacity (Ah): 840 (-930) Battery weight (kg): 2196 Working pressure for attachments (bar): 250 Oil flow for attachments (l): 50 Sound pressure level LpAZ (operator position) 2 dB(A): 66 Human vibration: acceleration according to EN 13059 (m/s²): 0.42 Trailer coupling type: Pin

Būklė: naujas, Gamybos metai: 2023, keliamoji galia: 4 990 kg, kėlimo aukštis: 4 710 mm, šakių ilgis: 1 600 mm, bendras ilgis: 4 470 mm, - Operation: Seated driver - Load centre distance mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 - Tyres: Superelastic - Track width front/rear mm: 1,104 / 932 - Mast tilt angle forward/backward α/β °: 7 / 5 - Seat height (relative to SIP, low version) mm: 1,342 - Working aisle width with pallet 1000 x 1200 crosswise mm: 4,370 - Working aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm - Smallest pivot point distance: 729 mm - Travel speed with load km/h: 20 - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard Performance) with load: 0.39 / 0.31 m/s - Lifting speed without load m/s: 0.45 - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 - Tractive force with load N: 6,750 - Tractive force without load N: 7,430 - Max. tractive force (Plus//Standard Performance) with load N: 22,590 / 19,000 - Max. tractive force (Plus//Standard Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 - Max. gradeability (Plus//Standard Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard Performance) with load sec: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard Performance) without load sec: 5.7 / 6.2 - Service brake: Hydraulically actuated wet multi-disc brake - Battery voltage V: 80 - Handling capacity (Plus//Standard Performance) t/h: 324 / 315 - Working hydraulic pressure for attachments bar: 250 - Hydraulic oil flow for attachments l: 50 - Sound pressure level (operator's position) dB(A): 66 Nsdpsy E Ubtofx Afaslc - Human vibration: acceleration according to EN 13059 m/s²: 0.42 - Tow hitch, type: Pin

Būklė: naudotas, Gamybos metai: 2022, keliamoji galia: 4 990 kg, kėlimo aukštis: 7 230 mm, bendras ilgis: 5 300 mm, - Operation: Seated driver - Load centre distance mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 - Tyres: Superelastic - Track width front/rear mm: 1,104 / 932 - Mast tilt angle forward/backward α/β °: 7 / 5 - Seat height (relative to SIP, low version) mm: 1,342 - Working aisle width with pallet 1000 x 1200 crosswise mm: 4,370 - Working aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm - Smallest pivot point distance: 729 mm - Travel speed with load km/h: 20 - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard Performance) with load: 0.39 / 0.31 m/s - Lifting speed without load m/s: 0.45 Nodpfey E Ua Nsx Afaelc - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 - Tractive force with load N: 6,750 - Tractive force without load N: 7,430 - Max. tractive force (Plus//Standard Performance) with load N: 22,590 / 19,000 - Max. tractive force (Plus//Standard Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 - Max. gradeability (Plus//Standard Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard Performance) with load sec: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard Performance) without load sec: 5.7 / 6.2 - Service brake: Hydraulically actuated wet multi-disc brake - Battery voltage V: 80 - Handling capacity (Plus//Standard Performance) t/h: 324 / 315 - Working hydraulic pressure for attachments bar: 250 - Hydraulic oil flow for attachments l: 50 - Sound pressure level (operator's position) dB(A): 66 - Human vibration: acceleration according to EN 13059 m/s²: 0.42 - Tow hitch, type: Pin

Būklė: naudotas, Gamybos metai: 2001, Gebrauchte Schrumpfverpackungsmaschine SMI SK 450T – 45 Takte/min – Tray-Ausführung Wenn Sie auf der Suche nach einer hochwertigen Schrumpfverpackungslösung sind, ist die SMI SK 450T Ihre erste Wahl. Diese Maschine, hergestellt vom renommierten Hersteller SMI im Jahr 2001, vereint erstklassige Ingenieurskunst und Design und erfüllt Ihre Verpackungsanforderungen mit höchster Präzision und Zuverlässigkeit. Nljdpevgudxsfx Afaec Maschinendetails: Maschinentyp: Schrumpfverpacker Hersteller: SMI Modell: SK 450T Baujahr: 2001 Maximale Leistung: 45 Packungen pro Minute (ppm) Behältermaterial: Glas Maximale Behälterhöhe: 340 mm Verpackungsart: Folientray Anzahl der Bahnen: 6 Maximale Folienbreite: 500 mm Anzahl der Folienrollen: 2 Bedienseite: rechts Zustand: wie gesehen Garantie: 6 Monate Höhere Effizienz und Vielseitigkeit: Die SMI SK 450T steigert Ihre Verpackungsprozesse dank der beeindruckenden Geschwindigkeit von bis zu 45 Packungen pro Minute. Die Kompatibilität mit Glasbehältern und Folientrays bietet eine ansprechende, professionelle Präsentation Ihrer Produkte. Präzision und Flexibilität: Mit sechs Bahnen für verschiedene Behältergrößen und einer maximalen Folienbreite von 500 mm deckt die SK 450T unterschiedlichste Verpackungsanforderungen ab und ermöglicht präzise, flexible Produktion gemäß Ihren Bedürfnissen. Reibungsloser Betrieb und Überwachung: Ausgestattet mit intuitivem Human-Machine-Interface (HMI) und einer SPS-Steuerung, beides von SMI entwickelt, gewährleistet die SK 450T eine einfache Bedienung sowie umfassende Überwachung der Maschinenperformance. Ergonomisch optimiert: Die Arbeitshöhe von 1200 mm wurde gezielt für ergonomischen Bedienkomfort konzipiert – das reduziert Ermüdung des Bedienpersonals und erhöht die Produktivität. Optimieren Sie Ihre Verpackungsprozesse: Verpassen Sie nicht die Gelegenheit, Ihre Produktion mit dem SMI SK 450T Schrumpfpacker zu modernisieren. Dank ihrer fortschrittlichen Funktionen und dem hervorragenden Ruf in puncto Leistung und Langlebigkeit ist diese Maschine eine ideale Investition für Unternehmen, die einen Wettbewerbsvorteil suchen. Kontaktieren Sie uns, um mehr über die SMI SK 450T zu erfahren und wie diese Maschine Ihre Verpackungsabläufe revolutionieren kann. Steigern Sie Ihre Produktionseffizienz und Ihre Produktpräsentation mit dieser Premium-Schrumfverpackungslösung von SMI.

Būklė: naujas, Gamybos metai: 2026, Funkcionalumas: visiškai funkcionalus, Įranga: CE žymėjimas, dokumentacija / vadovas, The SEGA C40 PRO – 3 AXES by SICAR is a panel saw designed for professionals who demand uncompromising precision, speed, and control. This machine transforms cutting operations into a smooth, optimized, industrial process. Nedpeuzxk Ajfx Afajlc At its core is a 10” capacitive touchscreen, both intuitive and responsive, which communicates directly with the integrated software for layout optimization and automatic cutting. In other words: less waste, higher output, and data-driven decisions made right at the machine. The parallel guide carriage, driven by a servo motor, ensures fast movements and millimetric positioning, even for the most repetitive tasks. Here, precision isn’t an option—it’s the standard. The programmable parallel fence with PLC, combined with a large visual scale guide, makes positioning simple, stable, and immediate. Fewer human errors, more operational control. The SEGA C40 PRO – 3 AXES isn’t just a panel saw: it’s an intelligent work platform designed to optimize time, increase quality, and take your workshop into a new dimension of efficiency. Compliant with the latest CE regulations.

Būklė: naudotas, Gamybos metai: 2020, Funkcionalumas: visiškai funkcionalus, Cobot Collaborative Robot Dobot CR5 – Demonstration Robot with Chromebook Reach: 900 mm Payload: 5 kg Year of manufacture: 03/2020 14-day start-up guarantee. No further warranty. Nlodpfsy Rmd Rox Afaoc Collaborative Robot Series Supports payloads of 3 kg, 5 kg, 10 kg, and 16 kg Safe operation alongside humans and cost-effective Hand guidance, collision detection, and trajectory reproduction Ideal for application scenarios involving human-robot collaboration Multiple control methods Low latency and high interference resistance Supports control interfaces on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel – Robot Hand Guidance The Intelligent Interactive Panel features embedded LEDs that indicate the robot’s status With a single button press, you can manually guide the robot to teach it a specific path Wide compatibility Broad compatibility with a variety of peripheral components Suitable for feeding, assembly, inspection, handling, screwing, grinding, and gluing Multiple I/O and communication interfaces provide unlimited expansion possibilities The addition of software/API constitutes an open DOBOT platform, enabling compatibility with an extensive range of accessories.

Būklė: naudotas, Gamybos metai: 2023, keliamoji galia: 4 990 kg, kėlimo aukštis: 6 040 mm, šakių ilgis: 1 600 mm, bendras ilgis: 5 120 mm, - Operation: Seated driver - Load centre distance mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 - Tyres: Superelastic - Track width front/rear mm: 1,104 / 932 - Mast tilt angle forward/backward α/β °: 7 / 5 - Seat height (relative to SIP, low version) mm: 1,342 - Working aisle width with pallet 1000 x 1200 crosswise mm: 4,370 - Working aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm - Smallest pivot point distance: 729 mm - Travel speed with load km/h: 20 - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard Performance) with load: 0.39 / 0.31 m/s - Lifting speed without load m/s: 0.45 - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 - Tractive force with load N: 6,750 - Tractive force without load N: 7,430 - Max. tractive force (Plus//Standard Performance) with load N: 22,590 / 19,000 - Max. tractive force (Plus//Standard Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 Nlodpfsy Aznbsx Afajc - Max. gradeability (Plus//Standard Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard Performance) with load sec: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard Performance) without load sec: 5.7 / 6.2 - Service brake: Hydraulically actuated wet multi-disc brake - Battery voltage V: 80 - Handling capacity (Plus//Standard Performance) t/h: 324 / 315 - Working hydraulic pressure for attachments bar: 250 - Hydraulic oil flow for attachments l: 50 - Sound pressure level (operator's position) dB(A): 66 - Human vibration: acceleration according to EN 13059 m/s²: 0.42 - Tow hitch, type: Pin

Būklė: naujas, Gamybos metai: 2025, CNC- and PC-controlled optimizing crosscut saw with brushless cutting system, for wood optimization and defect elimination. COST-CUTTING OPTIMIZER The Supercut 500 is a high-speed optimizing saw designed to meet the most demanding production capacities with maximum reliability. EXTREMELY ROBUST Fully fabricated from thick, reinforced, painted steel. The synchronized feed belt is driven by the same motor as the feed rollers. Exclusive system with dual, heavy-duty upper and lower traction. Upper feed assembly with 3 driven-toothed wheels and 6 idle (3 pairs) upper-pressure rollers. The raising and lowering of the toothed rollers is controlled directly via the CNC. TECHNOLOGICALLY ADVANCED Electronic system with a real-time connected PC and next-generation CNC controller. S4U software within a Windows environment. Supports up to 5 wood grades. 22” LED color display. Remote teleservice via internet. Excel macro included. FAST The innovative cutting system is so quick that the saw blade is almost invisible to the human eye. Optimizes both in fast and total modes, while maintaining a compact machine footprint. Feed with 18 Nm brushless electronic motor. Saw blade with 28 Nm brushless electronic motor. Saw motor power HP=7.5 (5.5 kW). Eight idle rollers positioned beneath the feed belt. RELIABLE AND SAFE Nsdpsfhdvrjfx Afajlc Two steel marking stations. Standalone electrical cabinet, separate from the machine. Independent pneumatic adjustments to accommodate various production types. Internal lighting.

Būklė: naujas, Gamybos metai: 2024, Morbidelli M200 CNC-CONTROLLED MACHINING CENTER - C.E. Safety regulations - Morbidelli m200 3715x1620 Z250 - Voltage 400 V (EU) - Frequency 50 Hz - PRO-SPACE safety devices - Y passage (panel clearance) 2200 mm - Retractable safety barriers - "TECPAD wired" remote control with 7" touchscreen display - TRB14 tool changer (version Y=1620) - FAST14 tool changer - 1 vacuum pump, capacity 250/300 m³/h at 50/60 Hz - Central optimized extraction port on rear drilling head - Drilling unit with pneumatic vertical positioning (individual Z-axis) - RO.AX F31LTC drilling unit - Extraction hood for drilling unit - Drilling unit with inverter - Pressure booster Nsdpfeu Illmex Afaelc - 5-axis unit "Prisma 5" version "KT" - Extraction hood for 5-axis electrospindle - 7-position extraction hood for 5-axis electrospindle - Device for liquid cooling (air type) - 6 "TV FLEXMATIC" worktables 1600 - Conveyor belt for chip and waste extraction for X=3710 mm - Removable chip collection bin at end of machine base - Tool length measuring sensor - 4 loading aid devices H=75 1600 - Front stops H=75 for 6 supports - 12 x fixed suction cups 145x145 H=75 mm - 6 x rotary suction cups 145x55 H=75 mm - Preparation for clamping cylinders for 6 supports TV FLEX / TV FLEXDRIVE / TV FLEXMATIC - Maestro connect: service contract for 1 year (including "plug&play" gateway kit) - SCM DIGITAL SOLUTIONS: MAESTRO CONNECT - Human-machine interface software (HMI) MAESTRO ACTIVE - Machine operating software Maestro lab - Maestro hardware key - Additional Maestro hardware key (for USB port) - Mobile control console "eye-M TOP" - TELESOLVE remote maintenance via Internet - Mobile control unit with 6.5m cable - S-N-D 3-position selector switch - MACHINE LANGUAGE: German - incl. delivery, 3 days pre-training, 1 week installation and operator training - New machine, still in original packaging

Būklė: labai geros būklės (naudotas), Gamybos metai: 2022, Funkcionalumas: visiškai funkcionalus, veikimo valandos: 3 000 h, SCM accord 40 fx - CNC MACHINING CENTER FOR TIMBER CONSTRUCTION (For complete description see attachment) Used machine Year of manufacture: 10/2022 Consisting of: R21431 accord 40 fx – Working Area X-Y = 9000x1905 Z = 350 OF0158 Usable clearance height Z = 350 mm (with H50 suction cups) OF0165 Axis travel speed of Accord 40 fx (PRO-SPEED version) OF0168 Pendulum operation OF0169 Automatic axis lubrication OF0299 TELESOLVE remote maintenance via internet 450328 eye-M PRO operator console with integrated PC 450291 Additional fixed control panel 870068 TECPAD – remote control of machine functions 560058 No. 10 MATIC support rails – L1825 230237 MAXI machining unit – Prisma T 870031 Chip conveyor on electrospindle, adjustable 870109 Preparation for "Prisma T-S" angle drive 470014 Air nozzle for tool 870119 Tool length measuring device 870016 BRC machining unit 510014 Preparation for H145 clamping jaws for worktable with 10 support rails 480178 Front stop row H110 for worktable with 10 support rails 480105 Rear stop row H110 for worktable with 10 support rails 480137 First lateral stop row H110 for worktable with 10 support rails 480005 Suction cup H110 145x145 mm – 12 pcs 480006 Suction cup H110 145x55 mm, rotatable – 8 pcs 480018 Suction cup H110 145x30 mm, rotatable – 5 pcs 480049 Suction cup H110 200x40 mm, rotatable – 5 pcs 480149 First lateral stop row H145 for worktable with 10 support rails 480153 Second lateral stop row H145 for worktable with 10 support rails 480107 Round pneumatic clamping cylinders H145 – 8 pcs 480108 Square pneumatic clamping cylinders H145 – 30 pcs 480111 Six double-stroke lifting devices H145 – 1 450289 Laser and reference stop H145 for arches (left) 350016 Vacuum pump 250 (300) m3/h – 50 (60) Hz 190046 Safety system PRO-SPEED 210057 TRC 48 – rear tool magazine 210190 MACH 5 – quick-change device 870236 RTCP setting – self-calibration system for Prisma working unit Air conditioning for control cabinet 450288 Safety cover with vertical ON-OFF adjustment Nlodpfjyzgxcsx Afaoc 210852 SCM HSK 63E angle head – underfloor milling unit OF0438 Human-machine interface software (HMI) MAESTRO ACTIVE OF0543 Operating system Windows 10 embedded 64 bit OF0422 Machine operating interface software Maestro cnc OF0435 Hardware key for Maestro cnc 524309 Maestro 3D-Advanced module 630359 Additional hardware key for Maestro cnc (for USB port) 523687 ProView simulation software 109993 MACHINE LANGUAGE: German SPEC01 Custom design: Special Accord 9 meter processing in X SPEC02 Custom design: 2 pcs. slide-in aids double stroke H145 SPEC03 Custom design: Spare spindle Maxi-Prisma-T

Gamybos metai: 2016, būklė: naudotas, No. 10010 Doppstadt SM 620 K Trommel Screen Used, year of manufacture 2016 (completely overhauled by the manufacturer in 2024) Mobile drum screening machine on tracks. Suitable for humus/soil, wood, waste, compost, light construction debris, etc. 7,500 operating hours Tracked undercarriage incl. 2 travel speeds Track width: 500 mm Deutz diesel engine TCD3.6 L4, 90 kW at 1600 rpm (complies with EUROMOT IIIB/Tier 4i emission standard) Additional pump drive for attaching further hydraulic consumers Reversible fan at water and oil cooler Fully swing-out engine unit Fuel tank: 300 litres Feed hopper: 5 m³ capacity Hydraulically folding side conveyor, belt length 5000 mm, belt width 1000 mm Hydraulically folding rear conveyor, belt length 5000 mm, belt width 1000 mm Emergency stop switches on side and rear conveyors Load-dependent regulated material feed from feeder floor to screening drum Continuously adjustable trommel rotation speed from 0–18 rpm Continuously adjustable hopper belt speed from 0–0.17 m/s Control cabinet at the rear of the machine with the following functions: Emergency stop switch (screen only) / rear conveyor fold/unfold / side conveyor fold/unfold / side conveyor bending Hydraulically folding cleaning brush with individual brush elements and spring tines Centrally positioned lubrication strips 24 V electrical control system Njdpfx Ajv Eyqbefajlc Radio remote control incl. transmitter, receiver, 230 V charger, 12/24 V charging cable, transmitter holder (following functions can be controlled: engine stop, engine speed +/-, rear conveyor fold/unfold, side conveyor fold/unfold, machine travel & steering, stone grid preparation open/close) Hydraulic preparation for star screen insert operation Hydraulic quick coupling between rear conveyor and machine Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Auxiliary hydraulic connection 40 l/min at rear of machine Magnetic drum for rear conveyor Flow divider at rear conveyor Internally geared hopper belt drive Screen drum SM620 QV30-38 BL08 for SM 620 profi/Plus/.2 (length 5430 mm / diameter 2000 mm / thickness 8 mm / perforation 30 mm (offset holes)) Transport dimensions approx. 10550 x 3000 x 3690 mm (LxWxH) Weight approx. 24,000 kg Sale on behalf of customer, ex location near 85221 Dachau, without dismantling, transport or assembly Errors in description and price excepted Dismantling, transport, and loading by us available as an option To avoid possible misunderstandings, an on-site inspection is possible and recommended by prior appointment Sale takes place as-is Technical data, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded; the following applies: "sold as seen" Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus statutory VAT, payment before pick-up or shipping Delivery conditions: ex location

Būklė: dilaminuotas dirbtuvėje (naudotas), Funkcionalumas: visiškai funkcionalus, The Barriquand Steriflow 1341 Autoclave is an essential asset for all food processing industries aiming to optimize their sterilization processes. Thanks to advanced technology and precise control systems, it ensures uniform heat treatment throughout the entire cycle. This guarantees optimal food safety for your products while preserving their taste and nutritional qualities. This model stands out for its exceptional reliability and large capacity, making it a perfect solution for high-volume, industrial operations. Additionally, its reinforced stainless steel construction ensures long-lasting resistance to corrosion and makes daily cleaning and maintenance straightforward. Fully automated cycles enable consistently high results and minimize the risk of human error. An intuitive control panel combined with highly flexible programming options grants you complete control over temperature, pressure, and cycle duration parameters. This allows adaptation of each cycle to various types of products: canned foods, ready meals, sauces, or jarred goods. By investing in this autoclave, you are choosing proven technology compliant with European regulations that not only extends the shelf life of your products but also enhances the overall performance of your production line. Nlodpfx Afjxg Ec Isajc Technical specifications: - Vessel diameter: 1,550 mm - Maximum temperature: up to 135 °C - Working pressure: 2 to 2.5 bar - Electrical supply: three-phase, 400 V - Approximate dimensions: L 834 cm x W 160 cm x H 220 cm

Būklė: naujas, Gamybos metai: 2026, The SPT-FS 50 capsule filling machines are designed for the fully automatic filling of hard gelatin capsules in sizes #00 - #4 (optionally #000, 5) with powder, granules, or pellets in the pharmaceutical and nutraceutical sectors. Dosing is carried out via a dosing disc, which ensures high filling accuracy. The new SPT series of fully automatic capsule filling machines offers: - Capsule sizes from #000 to 5 - Encapsulation of powders, granules, and pellets - Faster and simpler format changes without the need for additional tools - Touchscreen operation - User-friendly HMI (Human-Machine Interface) - Compliance with GMP guidelines - CE certification - 2-year warranty - Installation and repair service based in Germany Number of segments: 6 Max. output: 50,000 capsules/hour Capsule sizes: #00, 1, 2, 3, 4 (optionally #000, 5) Nljdpfx Ajf Hp U Uofajc Max. rotation speed: 130 rpm Speed control: inverter Machine dimensions: 1,200 x 1,470 x 1,850 mm

Būklė: naujas, Gamybos metai: 2026, The SPT-FS80 capsule filling machines are designed for fully automatic filling of hard gelatin capsules in sizes #00 - #4 (optionally #000, 5) with powder, granules or pellets for the pharmaceutical and dietary supplement industries. The dosing is performed via a dosing disc, ensuring high accuracy of fill weight. Nsdpfx Aedy Dynofaelc The new SPT series of fully automatic capsule filling machines offer: - Capsule sizes from #000 - 5 - Encapsulation of powder, granules, and pellets possible - Quicker and easier format changes without additional tools - Touch screen - User-friendly operation via HMI (Human Machine Interface) - Manufactured according to GMP guidelines - CE certified - 2-year warranty - Installation and repair service from Germany Number of segments: 10 Max. output, caps/h: 80,000 Capsule sizes: #00, 1, 2, 3, 4 (optionally #000, 5) Max. rotation speed: 130 rpm Speed control: inverter Machine dimensions: 1,320 x 1,050 x 1,970 mm

Būklė: naujas, Gamybos metai: 2026, The SPT-FM 100 capsule filling machines are designed for fully automatic filling of hard gelatin capsules in sizes #00 to #4 (optionally also #000 and #5) with powder, granules, or pellets, for use in the pharmaceutical and dietary supplements sectors. Dosing is carried out via a dosing disk, ensuring high filling accuracy. The new SPT series of fully automatic capsule filling machines offers: - Capsule sizes from #000 to #5 - Filling of powders, granules, and pellets possible - Quicker and easier format changeover without additional tools - Touchscreen operation - User-friendly HMI (Human Machine Interface) - In compliance with GMP guidelines - CE certified - 2-year warranty - Installation and repair service based in Germany Technical Data: - Number of segments: 14 - Maximum output: 110,000 capsules/hour - Capsule sizes: #00, 1, 2, 3, 4 (optionally #000, 5) - Maximum rotation speed: 130 rpm - Speed control: Inverter Nljdpfx Afjdy Dywsaec - Machine dimensions: 1,650 x 1,650 x 1,030 mm

Būklė: naujas, Gamybos metai: 2025, garantijos trukmė: 12 mėnesiai, bendras plotis: 1 400 mm, bendras ilgis: 1 400 mm, bendras aukštis: 2 000 mm, sukimosi greitis (atstumas/laikas): 50 mm/min, Rotary Tablet Press SPT-TP500DH Salt Production Touchscreen, PLC Control Panel; HMI (Human Machine Interface); SPT-TP 500 DH Number of Stations: 33 Standard Tools: EU 1" (IPZ1") Nljdpovu Uk Ujfx Afaec Max. Output per Hour: 180,000 pcs Rotation Speed: 5–50 rpm Max. Tablet Diameter (Round): 30 mm Max. Filling Depth: 35 mm Upper Punch Penetration (max.): 1–6 mm Max. Main Compression Force: 20 t Die Diameter: 41.30 mm Die Height: 38.10 mm Punch Barrel Diameter: 31.70 mm Punch Length: 154 mm Machine Dimensions with Hopper (L x W x H): 1,400 x 1,400 x 2,000 mm Machine Weight: 7,000 kg Power Rating: 20 kW Voltage / Frequency: 240/400 V – 50/60 Hz

Būklė: naujas, Gamybos metai: 2026, The SPT series capsule filling machines are designed for fully automatic filling of hard gelatin capsules in sizes #00 - #4 (optional #000, 5) with powder, granules, or pellets in the pharmaceutical and nutraceutical sectors. Dosing is performed via a dosing disk, ensuring high accuracy of the fill weight. The new SPT series of fully automatic capsule filling machines offers: - Capsule sizes from #000 to 5 - Encapsulation of powders, granules, and pellets - Faster and easier format changeover without additional tools - Touchscreen - User-friendly operation via HMI (Human Machine Interface) Nljdjdy Dyfepfx Afasc - Compliance with GMP guidelines - CE certified - 2-year warranty - Installation and repair service based in Germany Number of segments: 1 / 2 / 3 Max. output (capsules/hour): 8,500 / 17,000 / 25,000 Capsule sizes: #00, 1, 2, 3, 4 (optional #000, 5) Max. rotational speed: 140 rpm Speed control: Inverter Machine dimensions: 900 x 1,100 x 1,700 mm

Būklė: naujas, Gamybos metai: 2026, The SPT-FM150 capsule filling machines are designed for the fully automatic filling of hard gelatin capsules in sizes #00 to #4 (optionally #000, #5) with powder, granulate, or pellets for the pharmaceutical and nutraceutical sectors. Dosing is performed via a dosing disk, ensuring high accuracy of fill weight. The new SPT series of fully automatic capsule filling machines offers: - Capsule sizes from #000 to #5 - Encapsulation of powder, granules, and pellets - Faster and easier format changeover without additional tools - Touchscreen - User-friendly operation via HMI (Human-Machine Interface) - Manufactured according to GMP guidelines - CE certified - 2-year warranty - Installation and repair service from Germany Nsdpfx Afjdy Dyzsaslc Technical specifications: - Number of segments: 20 - Max. output (caps/h): 150,000 - Capsule sizes: #00, 1, 2, 3, 4 (optionally #000, #5) - Max. rotation speed: 130 rpm - Speed control: Inverter - Machine dimensions: 1,750 x 1,750 x 2,100 mm

Būklė: paruoštas naudoti (naudotas), Funkcionalumas: visiškai funkcionalus, The Tecma Pack FM1200p Cartoning Machine is an industrial automatic cartoning solution designed for end-of-line packaging. It forms, fills, and seals cartons with precision, ensuring optimal standardization of packaging processes. This makes it ideally suited to food industry environments that require consistent throughput and a high level of reliability. Nljdpoy Nxnlofx Afaec With its automated system, the FM1200p guarantees continuous production with a steady carton flow. It significantly reduces manual handling while improving overall productivity. As a result, it maximizes end-of-line performance and minimizes the risk of human error. Furthermore, its gluing system ensures clean and secure sealing—crucial for logistics and transport. This cartoner stands out for its ability to handle various carton sizes while maintaining a constant operating speed. It effortlessly integrates with conveyor belts, filling machines, or palletizing systems. Its robust construction is built to deliver uninterrupted operation in demanding industrial settings. Overall, the Tecma Pack FM1200p Cartoning Machine is a strategic solution for automating your packaging while optimizing costs. As a reconditioned unit, it achieves high performance levels with a cost-effective investment. Technical specifications: - Output: 1,200 cartons/hour - Machine power: 2 kW - Glue unit power: 4 kW - Air consumption: 7 m³/h - Air pressure: 6 bar - Gluing system: hot melt - Control: programmable logic controller (PLC) - Weight: 1,000 kg - Dimensions (L × W × H): 3,950 × 1,860 × 2,250 mm ❓ What to check before investing in the FM1200p What actual output can this cartoner achieve? It delivers 1,200 cartons per hour, suitable for continuous industrial production. Is the gluing system reliable for transport? Yes, the hot melt gluing guarantees strong and consistent carton sealing. Can it be easily integrated into an existing line? Yes, it is specifically designed for end-of-line operation with conveyors and palletizing systems. What types of cartons can it handle? It accommodates various formats, providing high production flexibility.

Būklė: naudotas, Händle dėžinis tiektuvas BKS 1506 su plieninių plokščių konvejeriu, didelės talpos (25 m³) ir dviem atskirai varomomis draskymo velenais sunkiai apdorojamoms medžiagoms. Tinka moliui, rišamoms medžiagoms, substratams, humusui, atliekoms ir pan. Yra 2 vnt., nauja valdymo sistema pagal užklausą. Kaina pagal susitarimą. Nodpfx Afsylx Icjaelc

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, galia: 18,5 kW (25,15 AG), pavaros tipas: hidrostatinis, kuro tipas: dyzelinas, spalva: mėlyna, bendras svoris: 3 500 kg, tuščias svoris: 32 000 kg, darbinė masė: 3 210 kg, grandinės būklė: 100 procentas, sėdimų vietų skaičius: 1, pirmoji registracija: 09/2024, emisijos klasė: Euro 5, Gamybos metai: 2024, veikimo valandos: 2 h, mašinos/transporto priemonės numeris: B33, Įranga: guminės vikšrinės juostos, hidraulinis kūjis, kabina, papildomi žibintai, reguliuojama važiuoklė, reguliuojamas strėlė, standartinis kaušas, Our latest excavator, the H&R B 33, features a newly designed arm with dual-sided pivoting capability. The new version has a transport weight of 3,200 kg, measuring 4.95 m in length, 0.98 / 1.5 m in width, and 2.54 m in height. It offers two travel speeds of approximately 4.5 km/h. The bucket is 0.4 m wide, holds 0.095 cbm, and is equipped with a quick coupler system. The Kubota D1505 engine delivers 18.5 kW and complies with the latest E-5 emissions standard. The excavator is also CE certified. Optional attachments include an auger, a hydraulic breaker, or an adjustable topsoil bucket in various widths from 0.80 m to 1.2 m. Spare parts are available from us. We provide a 2-year statutory warranty and a 1-year guarantee as standard. Spare parts supply and service are ensured directly by our company. Financing options with terms from 48 to 84 months are available. Net price: €28,485 VAT (19%): €5,412.15 Nlsdpfx Ajulygljfasc Gross price: €33,897.15

Būklė: naudotas, Gamybos metai: 2023, keliamoji galia: 4 990 kg, kėlimo aukštis: 4 700 mm, šakių ilgis: 1 600 mm, bendras ilgis: 4 470 mm, - Operation: Seated driver - Load centre distance mm: 525 mm - Axle load with load front/rear kg: 11,475 / 1,283 - Axle load without load front/rear kg: 3,814 / 3,954 - Tyres: Superelastic - Track width front/rear mm: 1,104 / 932 - Mast tilt angle forward/backward α/β °: 7 / 5 - Seat height (relative to SIP, low version) mm: 1,342 - Working aisle width with pallet 1000 x 1200 crosswise mm: 4,370 - Working aisle width with pallet 800 x 1200 lengthwise mm: 4,570 - Turning radius: 2,645 mm - Smallest pivot point distance: 729 mm - Travel speed with load km/h: 20 - Travel speed without load km/h: 20 - Lifting speed (Plus*//Standard Performance) with load: 0.39 / 0.31 m/s - Lifting speed without load m/s: 0.45 - Lowering speed with load m/s: 0.5 - Lowering speed without load m/s: 0.5 - Tractive force with load N: 6,750 - Tractive force without load N: 7,430 Nedpfoxd E Dmex Afaolc - Max. tractive force (Plus//Standard Performance) with load N: 22,590 / 19,000 - Max. tractive force (Plus//Standard Performance) without load N: 22,560 / 19,090 - Gradeability with load %: 8.9 - Gradeability without load %: 15.5 - Max. gradeability (Plus//Standard Performance) with load %: 20.4 / 13.8 - Max. gradeability (Plus//Standard Performance) without load %: 27.5 / 27.5 - Acceleration time 15 m (Plus//Standard Performance) with load sec: 6.3 / 7.4 - Acceleration time 15 m (Plus//Standard Performance) without load sec: 5.7 / 6.2 - Service brake: Hydraulically actuated wet multi-disc brake - Battery voltage V: 80 - Handling capacity (Plus//Standard Performance) t/h: 324 / 315 - Working hydraulic pressure for attachments bar: 250 - Hydraulic oil flow for attachments l: 50 - Sound pressure level (operator's position) dB(A): 66 - Human vibration: acceleration according to EN 13059 m/s²: 0.42 - Tow hitch, type: Pin

Būklė: naujas, Funkcionalumas: visiškai funkcionalus, Gamybos metai: 2024, bendras svoris: 100 kg, bendras aukštis: 1 000 mm, spalva: raudona, nuolatinis darbinis slėgis: 210 juosta, veleno sukimo momentas (maks.): 1 800 Nm, Įranga: hidraulika, Cone Splitter / Excavator Wood Splitter / Drill Cone Splitter / Log Splitter KS5 Drill Cone 200x400 – Made in Germany The powerful cone splitter for attachment to mini excavators, excavators, wheel loaders, tractors, forestry trailers, and many other applications. The drill cone can be swapped out for various tools such as a root grinder, earth auger, humus sieve, concrete mixing drum, weed brush, and many other attachments. The cone splitter consists of a very robust drive unit and the drill cone (splitting cone). The drill cone is fully hardened—not made from unhardened steel like many competitors. The device can be converted to other attachments in just a few steps. • Cone splitter • Root grinder • Earth auger • Weed brush • Sweeper • Power harrow NOT CHINESE IMPORTS! WE MANUFACTURE IN GERMANY! The ideal multipurpose tool for forestry professionals, farmers, landscapers, DIY enthusiasts, and professionals. Total length: 600 mm plus attachment and quick-change system Universally usable in construction, forestry, agriculture, and landscaping For splitting large firewood or timber for wood chips Nodpfouph Uxsx Afaslc For drilling earth holes for posts, plants, and much more For removing root stocks and tree stumps For cleaning ditches and paved surfaces For leveling garden areas and creating a fine soil structure Get the job done easily from the excavator without extra help. The very solid and stable steel construction enables tough and durable operation. The shaft is mounted not just on the motor but also with two heavy-duty tapered roller bearings to absorb both thrust and tension. The tapered roller bearings are greaseable for long service life. A powerful HMT 500 hydraulic motor provides up to 1,800 Nm torque for efficient performance, with a flow rate from 25 l/min up to 125 l/min at 210 bar pressure Weight: 70 kg Includes: • Drive unit with powerful HMT hydraulic motor, weight 70 kg • Drill cone with tip: Ø 200 mm, 270 mm/400 mm long, face side with 6xM16 threads, PCD173 Total length: 270 mm + drill cone tip 130 mm = 400 mm Diameter: 200 mm Weight: 30 kg Total weight: 100 kg

Būklė: naudotas, Gamybos metai: 2023, keliamoji galia: 3 500 kg, kėlimo aukštis: 4 660 mm, šakių ilgis: 1 200 mm, bendras ilgis: 3 880 mm, - Operation: Seated unit - Rated capacity/load: 3500 kg - Load center: 500 mm - Load distance: 468 mm - Axle load with load, front/rear (kg): 8042/958 - Axle load without load, front/rear (kg): 2662/2838 - Track width front/rear (mm): 1002/900 - Mast/carriage tilt, forward/backward (°): 7/7 - Aisle width for 1000 x 1200 mm pallets crosswise (mm): 3941 - Aisle width for 800 x 1200 mm pallets lengthwise (mm): 4141 - Turning radius: 2273 mm - Minimum pivot distance: 649 mm - Travel speed (Blue-Q/Standard/Sprint) with load (km/h): 18/18/20 - Travel speed (Blue-Q/Standard/Sprint) without load (km/h): 18/18/21 - Lifting speed (Plus* / Standard Performance) with load (m/s): 0.53 / 0.44 - Lifting speed (Plus* / Standard Performance) without load (m/s): 0.57 / 0.51 - Lowering speed with load (m/s): 0.50 - Lowering speed without load (m/s): 0.43 - Tractive force (Plus* / Standard Performance) with load (N): 10,300 / 7,590 - Tractive force (Plus* / Standard Performance) without load (N): 10,650 / 8,015 - Max. tractive force (Plus* / Standard Performance) with load (N): 20,900 / 16,920 Nlodpfxexd Et Io Afajc - Max. tractive force (Plus* / Standard Performance) without load (N): 20,290 / 17,170 - Gradeability (Plus* / Standard Performance) with load (%): 17.8 / 12.9 - Gradeability (Plus* / Standard Performance) without load (%): 28.2 / 21.9 - Max. gradeability (Plus* / Standard Performance) with load (%): 24.2 / 20.6 - Max. gradeability (Plus* / Standard Performance) without load (%): 24.82 / 28.2 - Acceleration time over 15 m (Plus* / Standard Performance) with load (s): 5.7 / 6.3 - Acceleration time over 15 m (Plus* / Standard Performance) without load (s): 5.0 / 5.4 - Service brake: Hydraulically actuated multi-disc brake - Handling capacity (Plus* / Standard Performance) (t/h): 258 / 245 - Energy consumption at handling capacity (Plus* / Standard Performance) (kWh/h): 8.6 / 8.0 - Working pressure for attachments (bar): 250 - Oil flow for attachments (l/min): 55 - Sound pressure level LpAZ (operator’s seat) dB(A): 70 - Human vibration: Acceleration according to EN 13059 (m/s²): 0.57 - Trailer coupling, type: DIN pin